Age | Commit message (Collapse) | Author |
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"22 hotfixes. 13 are cc:stable and the remainder address post-6.14
issues or aren't considered necessary for -stable kernels.
About half are for MM. Five OCFS2 fixes and a few MAINTAINERS updates"
* tag 'mm-hotfixes-stable-2025-05-10-14-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
mm: fix folio_pte_batch() on XEN PV
nilfs2: fix deadlock warnings caused by lock dependency in init_nilfs()
mm/hugetlb: copy the CMA flag when demoting
mm, swap: fix false warning for large allocation with !THP_SWAP
selftests/mm: fix a build failure on powerpc
selftests/mm: fix build break when compiling pkey_util.c
mm: vmalloc: support more granular vrealloc() sizing
tools/testing/selftests: fix guard region test tmpfs assumption
ocfs2: stop quota recovery before disabling quotas
ocfs2: implement handshaking with ocfs2 recovery thread
ocfs2: switch osb->disable_recovery to enum
mailmap: map Uwe's BayLibre addresses to a single one
MAINTAINERS: add mm THP section
mm/userfaultfd: fix uninitialized output field for -EAGAIN race
selftests/mm: compaction_test: support platform with huge mount of memory
MAINTAINERS: add core mm section
ocfs2: fix panic in failed foilio allocation
mm/huge_memory: fix dereferencing invalid pmd migration entry
MAINTAINERS: add reverse mapping section
x86: disable image size check for test builds
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.15, round #3
- Avoid use of uninitialized memcache pointer in user_mem_abort()
- Always set HCR_EL2.xMO bits when running in VHE, allowing interrupts
to be taken while TGE=0 and fixing an ugly bug on AmpereOne that
occurs when taking an interrupt while clearing the xMO bits
(AC03_CPU_36)
- Prevent VMMs from hiding support for AArch64 at any EL virtualized by
KVM
- Save/restore the host value for HCRX_EL2 instead of restoring an
incorrect fixed value
- Make host_stage2_set_owner_locked() check that the entire requested
range is memory rather than just the first page
|
|
The selftest can reproduce an issue where we miss the uncharge operation
when freeing msg, which will cause the following warning. We fixed the
issue and added this reproducer to selftest to ensure it will not happen
again.
------------[ cut here ]------------
WARNING: CPU: 1 PID: 40 at net/ipv4/af_inet.c inet_sock_destruct+0x173/0x1d5
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
Workqueue: events sk_psock_destroy
RIP: 0010:inet_sock_destruct+0x173/0x1d5
RSP: 0018:ffff8880085cfc18 EFLAGS: 00010202
RAX: 1ffff11003dbfc00 RBX: ffff88801edfe3e8 RCX: ffffffff822f5af4
RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff88801edfe16c
RBP: ffff88801edfe184 R08: ffffed1003dbfc31 R09: 0000000000000000
R10: ffffffff822f5ab7 R11: ffff88801edfe187 R12: ffff88801edfdec0
R13: ffff888020376ac0 R14: ffff888020376ac0 R15: ffff888020376a60
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000556365155830 CR3: 000000001d6aa000 CR4: 0000000000350ef0
Call Trace:
<TASK>
__sk_destruct+0x46/0x222
sk_psock_destroy+0x22f/0x242
process_one_work+0x504/0x8a8
? process_one_work+0x39d/0x8a8
? __pfx_process_one_work+0x10/0x10
? worker_thread+0x44/0x2ae
? __list_add_valid_or_report+0x83/0xea
? srso_return_thunk+0x5/0x5f
? __list_add+0x45/0x52
process_scheduled_works+0x73/0x82
worker_thread+0x1ce/0x2ae
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250425060015.6968-3-jiayuan.chen@linux.dev
|
|
When sending YNL CLI output into a pipe, closing the pipe causes a
BrokenPipeError. E.g. running the following and quitting less:
./tools/net/ynl/pyynl/cli.py --family rt-link --dump getlink | less
Traceback (most recent call last):
File "/home/donaldh/net-next/./tools/net/ynl/pyynl/cli.py", line 160, in <module>
main()
~~~~^^
File "/home/donaldh/net-next/./tools/net/ynl/pyynl/cli.py", line 142, in main
output(reply)
~~~~~~^^^^^^^
File "/home/donaldh/net-next/./tools/net/ynl/pyynl/cli.py", line 97, in output
pprint.PrettyPrinter().pprint(msg)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^
[...]
BrokenPipeError: [Errno 32] Broken pipe
Consolidate the try block for ops and notifications, and gracefully
handle the BrokenPipeError by adding an exception handler to the
consolidated try block.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250508112102.63539-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netdev_bind_rx takes ownership of the queue array passed as parameter
and frees it, so a queue array buffer cannot be reused across multiple
netdev_bind_rx calls.
This commit fixes that by always passing in a newly created queue array
to all netdev_bind_rx calls in ncdevmem.
Fixes: 85585b4bc8d8 ("selftests: add ncdevmem, netcat for devmem TCP")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250508084434.1933069-1-cratiu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix a crash in the ethtool YNL implementation when Hardware Clock information
is not present in the response. This ensures graceful handling of devices or
drivers that do not provide this optional field. e.g.
Traceback (most recent call last):
File "/net/tools/net/ynl/pyynl/./ethtool.py", line 438, in <module>
main()
~~~~^^
File "/net/tools/net/ynl/pyynl/./ethtool.py", line 341, in main
print(f'PTP Hardware Clock: {tsinfo["phc-index"]}')
~~~~~~^^^^^^^^^^^^^
KeyError: 'phc-index'
Fixes: f3d07b02b2b8 ("tools: ynl: ethtool testing tool")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250508035414.82974-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
- Make CFI_AUTO_DEFAULT depend on !RUST or Rust >= 1.88.0
- Clean Rust (and Clippy) lints for the upcoming Rust 1.87.0 and 1.88.0
releases
- Clean objtool warning for the upcoming Rust 1.87.0 release by adding
one more noreturn function
* tag 'rust-fixes-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
x86/Kconfig: make CFI_AUTO_DEFAULT depend on !RUST or Rust >= 1.88
rust: clean Rust 1.88.0's `clippy::uninlined_format_args` lint
rust: clean Rust 1.88.0's warning about `clippy::disallowed_macros` configuration
rust: clean Rust 1.88.0's `unnecessary_transmutes` lint
rust: allow Rust 1.87.0's `clippy::ptr_eq` lint
objtool/rust: add one more `noreturn` Rust function for Rust 1.87.0
|
|
Below are the tests added for Indirect Target Selection (ITS):
- its_sysfs.py - Check if sysfs reflects the correct mitigation status for
the mitigation selected via the kernel cmdline.
- its_permutations.py - tests mitigation selection with cmdline
permutations with other bugs like spectre_v2 and retbleed.
- its_indirect_alignment.py - verifies that for addresses in
.retpoline_sites section that belong to lower half of cacheline are
patched to ITS-safe thunk. Typical output looks like below:
Site 49: function symbol: __x64_sys_restart_syscall+0x1f <0xffffffffbb1509af>
# vmlinux: 0xffffffff813509af: jmp 0xffffffff81f5a8e0
# kcore: 0xffffffffbb1509af: jmpq *%rax
# ITS thunk NOT expected for site 49
# PASSED: Found *%rax
#
Site 50: function symbol: __resched_curr+0xb0 <0xffffffffbb181910>
# vmlinux: 0xffffffff81381910: jmp 0xffffffff81f5a8e0
# kcore: 0xffffffffbb181910: jmp 0xffffffffc02000fc
# ITS thunk expected for site 50
# PASSED: Found 0xffffffffc02000fc -> jmpq *%rax <scattered-thunk?>
- its_ret_alignment.py - verifies that for addresses in .return_sites
section that belong to lower half of cacheline are patched to
its_return_thunk. Typical output looks like below:
Site 97: function symbol: collect_event+0x48 <0xffffffffbb007f18>
# vmlinux: 0xffffffff81207f18: jmp 0xffffffff81f5b500
# kcore: 0xffffffffbb007f18: jmp 0xffffffffbbd5b560
# PASSED: Found jmp 0xffffffffbbd5b560 <its_return_thunk>
#
Site 98: function symbol: collect_event+0xa4 <0xffffffffbb007f74>
# vmlinux: 0xffffffff81207f74: jmp 0xffffffff81f5b500
# kcore: 0xffffffffbb007f74: retq
# PASSED: Found retq
Some of these tests have dependency on tools like virtme-ng[1] and drgn[2].
When the dependencies are not met, the test will be skipped.
[1] https://github.com/arighi/virtme-ng
[2] https://github.com/osandov/drgn
Co-developed-by: Tao Zhang <tao1.zhang@linux.intel.com>
Signed-off-by: Tao Zhang <tao1.zhang@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
|
|
FineIBT-paranoid was using the retpoline bytes for the paranoid check,
disabling retpolines, because all parts that have IBT also have eIBRS
and thus don't need no stinking retpolines.
Except... ITS needs the retpolines for indirect calls must not be in
the first half of a cacheline :-/
So what was the paranoid call sequence:
<fineibt_paranoid_start>:
0: 41 ba 78 56 34 12 mov $0x12345678, %r10d
6: 45 3b 53 f7 cmp -0x9(%r11), %r10d
a: 4d 8d 5b <f0> lea -0x10(%r11), %r11
e: 75 fd jne d <fineibt_paranoid_start+0xd>
10: 41 ff d3 call *%r11
13: 90 nop
Now becomes:
<fineibt_paranoid_start>:
0: 41 ba 78 56 34 12 mov $0x12345678, %r10d
6: 45 3b 53 f7 cmp -0x9(%r11), %r10d
a: 4d 8d 5b f0 lea -0x10(%r11), %r11
e: 2e e8 XX XX XX XX cs call __x86_indirect_paranoid_thunk_r11
Where the paranoid_thunk looks like:
1d: <ea> (bad)
__x86_indirect_paranoid_thunk_r11:
1e: 75 fd jne 1d
__x86_indirect_its_thunk_r11:
20: 41 ff eb jmp *%r11
23: cc int3
[ dhansen: remove initialization to false ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
|
|
The use of the demangle-ocaml APIs means we don't detect if a different
demangler is used before the OCaml one for the case that matters to
perf.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Ariel Ben-Yehuda <ariel.byd@gmail.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Bill Wendling <morbo@google.com>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Daniel Xu <dxu@dxuuu.xyz>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Trevor Gross <tmgross@umich.edu>
Link: https://lore.kernel.org/r/20250430004128.474388-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The use of the demangle-java APIs means we don't detect if a different
demangler is used before the Java one for the case that matters to
perf.
Remove the return types from the demangled names as dso__demangle_sym()
removes those.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Ariel Ben-Yehuda <ariel.byd@gmail.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Bill Wendling <morbo@google.com>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Daniel Xu <dxu@dxuuu.xyz>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Trevor Gross <tmgross@umich.edu>
Link: https://lore.kernel.org/r/20250430004128.474388-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The test cases are listed examples in:
https://doc.rust-lang.org/rustc/symbol-mangling/v0.html
This test was previously part of a different Rust v0 demangler:
https://lore.kernel.org/lkml/20250129193037.573431-1-irogers@google.com/
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Ariel Ben-Yehuda <ariel.byd@gmail.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Bill Wendling <morbo@google.com>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Daniel Xu <dxu@dxuuu.xyz>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Trevor Gross <tmgross@umich.edu>
Link: https://lore.kernel.org/r/20250430004128.474388-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Code is unused since the introduction of rustc-demangle demangler.
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Ariel Ben-Yehuda <ariel.byd@gmail.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Bill Wendling <morbo@google.com>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Daniel Xu <dxu@dxuuu.xyz>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Trevor Gross <tmgross@umich.edu>
Link: https://lore.kernel.org/r/20250430004128.474388-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adding support to display ref_ctr_offset in link output, like:
# bpftool link
...
42: perf_event prog 174
uprobe /proc/self/exe+0x102f13 cookie 3735928559 ref_ctr_offset 0x303a3fa
bpf_cookie 3735928559
pids test_progs(1820)
# bpftool link -j | jq
[
...
{
"id": 42,
...
"ref_ctr_offset": 50500538,
}
]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250509153539.779599-4-jolsa@kernel.org
|
|
Adding link info test for ref_ctr_offset retrieval for both
uprobe and uretprobe probes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/bpf/20250509153539.779599-3-jolsa@kernel.org
|
|
Adding support to retrieve ref_ctr_offset for uprobe perf link,
which got somehow omitted from the initial uprobe link info changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/bpf/20250509153539.779599-2-jolsa@kernel.org
|
|
Use the demangle-rust-v0 APIs to see if symbol is Rust mangled and
demangle if so.
The API requires a pre-allocated output buffer, some estimation and
retrying are added for this.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Ariel Ben-Yehuda <ariel.byd@gmail.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Bill Wendling <morbo@google.com>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Daniel Xu <dxu@dxuuu.xyz>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Trevor Gross <tmgross@umich.edu>
Link: https://lore.kernel.org/r/20250430004128.474388-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Imported at commit 80e40f57d99f ("add comment about finding latest
version of code") from:
https://github.com/rust-lang/rustc-demangle/blob/main/crates/native-c/src/demangle.c
https://github.com/rust-lang/rustc-demangle/blob/main/crates/native-c/include/demangle.h
There is discussion of this issue motivating the import in:
https://github.com/rust-lang/rust/issues/60705
https://lore.kernel.org/lkml/20250129193037.573431-1-irogers@google.com/
The SPDX lines reflect the dual license Apache-2 or MIT in:
https://github.com/rust-lang/rustc-demangle/blob/main/README.md
Following Migual Ojeda's suggestion comments were added on copyright and
keeping the code in sync with upstream.
The files are renamed as perf supports multiple demanglers and so
demangle as a name would be overloaded.
The work here was done by Ariel Ben-Yehuda <ariel.byd@gmail.com> and I
am merely importing it as discussed in the rust-lang issue.
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Ariel Ben-Yehuda <ariel.byd@gmail.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Bill Wendling <morbo@google.com>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Daniel Xu <dxu@dxuuu.xyz>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Trevor Gross <tmgross@umich.edu>
Link: https://lore.kernel.org/r/20250430004128.474388-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
TRACE_syscall.ptrace.negative_ENOSYS and TRACE_syscall.seccomp.negative_ENOSYS
on arm32 are being reported as failures instead of skipping.
The teardown_trace_fixture function sets the test to KSFT_FAIL in case of a
non 0 return value from the tracer process.
Due to _metadata now being shared between the forked processes the tracer is
returning the KSFT_SKIP value set by the tracee which is non 0.
Remove the setting of the _metadata.exit_code in teardown_trace_fixture.
Fixes: 24cf65a62266 ("selftests/harness: Share _metadata between forked processes")
Signed-off-by: Terry Tritton <terry.tritton@linaro.org>
Link: https://lore.kernel.org/r/20250509115622.64775-1-terry.tritton@linaro.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
tclock_gettime() is a wrapper around clock_gettime().
The first parameter of clock_gettime() is of type "clockid_t",
not "clock_t".
Use the correct type instead.
Link: https://lore.kernel.org/r/20250502-selftests-timens-fixes-v1-3-fb517c76f04d@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
These functions are never used outside their defining compilation unit and
can be made static.
Link: https://lore.kernel.org/r/20250502-selftests-timens-fixes-v1-2-fb517c76f04d@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The TAP specification requires that the output begins with a header line.
These headers lines are missing in the timens tests.
Print such a line.
Link: https://lore.kernel.org/r/20250502-selftests-timens-fixes-v1-1-fb517c76f04d@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Fix compile on openSUSE Tumbleweed (gcc-14.2.1, glibc-2.40):
- add missing sys/mount.h include
Fixes:
pid_max.c: In function ‘pid_max_cb’:
pid_max.c:42:15: error: implicit declaration of function ‘mount’ [-Wimplicit-function-declaration]
42 | ret = mount("", "/", NULL, MS_PRIVATE | MS_REC, 0);
| ^~~~~
Link: https://lore.kernel.org/r/20250115105211.390370-3-ps.report@gmx.net
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Commit 0b631ed3ce92 ("kselftest: cpufreq: Add RTC wakeup alarm") added
support for automatic wakeup in the suspend routine of the cpufreq
kselftest by using rtcwake, however it left the manual power state
change in the common path. The end result is that when running the
cpufreq kselftest with '-t suspend_rtc' or '-t hibernate_rtc', the
system will go to sleep and be woken up by the RTC, but then immediately
go to sleep again with no wakeup programmed, so it will sleep forever in
an automated testing setup.
Fix this by moving the manual power state change so that it only happens
when not using rtcwake.
Link: https://lore.kernel.org/r/20250430-ksft-cpufreq-suspend-rtc-double-fix-v1-1-dc17a729c5a7@collabora.com
Fixes: 0b631ed3ce92 ("kselftest: cpufreq: Add RTC wakeup alarm")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
In cpufreq basic selftests, one of the testcases is to read all cpufreq
sysfs files and print the values. This testcase assumes all the cpufreq
sysfs files have read permissions. However certain cpufreq sysfs files
(eg. stats/reset) are write only files and this testcase errors out
when it is not able to read the file.
Similarily, there is one more testcase which reads the cpufreq sysfs
file data and write it back to same file. This testcase also errors out
for sysfs files without read permission.
Fix these testcases by adding proper read permission checks.
Link: https://lore.kernel.org/r/20250430171433.10866-1-swapnil.sapkal@amd.com
Reported-by: Narasimhan V <narasimhan.v@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Poll program is a helper to ftracetest, thus make it a
generic file and remove it from being run as a test.
Currently when executing tests using
$ make run_tests
CC poll
TAP version 13
1..2
# timeout set to 0
# selftests: ftrace: poll
# Error: Polling file is not specified
not ok 1 selftests: ftrace: poll # exit=255
Fix this by using TEST_GEN_FILES to build the 'poll' binary as a helper
rather than as a test.
Fixes: 80c3e28528ff ("selftests/tracing: Add hist poll() support test")
Link: https://lore.kernel.org/r/20250409044632.363285-1-Ayush.jain3@amd.com
Signed-off-by: Ayush Jain <Ayush.jain3@amd.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Currently, __xlated_unpriv and __jited_unpriv do not work because the
BPF syscall will overwrite info.jited_prog_len and info.xlated_prog_len
with 0 if the process is not bpf_capable(). This bug was not noticed
before, because there is no test that actually uses
__xlated_unpriv/__jited_unpriv.
To resolve this, simply restore the capabilities earlier (but still
after loading the program). Adding this here unconditionally is fine
because the function first checks that the capabilities were initialized
before attempting to restore them.
This will be important later when we add tests that check whether a
speculation barrier was inserted in the correct location.
Signed-off-by: Luis Gerhorst <luis.gerhorst@fau.de>
Fixes: 9c9f73391310 ("selftests/bpf: allow checking xlated programs in verifier_* tests")
Fixes: 7d743e4c759c ("selftests/bpf: __jited test tag to check disassembly after jit")
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250501073603.1402960-2-luis.gerhorst@fau.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This version includes the following changes:
- Displays SST-PP2 revision fields.
- Skips updating uncore frequency limits on newer generations of CPUs.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
On SST PP level switch, skip adjusting the uncore frequency limit and
allow the hardware to handle this on newer platforms.
As newer generations of CPUs have changed the extended family identifier,
use this identifier to exclude the update.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
Display fields added by SST PP revision 2. They include:
uncore P0 (max frequency), P1 (base frequency) and Pm (min frequency)
for uncore fabric 1.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
There is a spelling mistake ina pr_debug message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250507082421.188848-1-colin.i.king@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When it finds a matching PMU for a legacy event, it should look for
core PMUs. The raw events also refers to core events so it should be
handled similarly.
On x86, PERF_TYPE_RAW should match with the existing cpu PMU. But on
ARM, there's no PMU with the matching type so it'll pick the first core
PMU for it.
Suggested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250507215939.54399-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This is to slow down lock acquistion (on contention locks) deliberately.
A possible use case is to estimate impact on application performance by
optimization of kernel locking behavior. By delaying the lock it can
simulate the worse condition as a control group, and then compare with
the current behavior as a optimized condition.
The syntax is 'time@function' and the time can have unit suffix like
"us" and "ms". For example, I ran a simple test like below.
$ sudo perf lock con -abl -L tasklist_lock -- \
sh -c 'for i in $(seq 1000); do sleep 1 & done; wait'
contended total wait max wait avg wait address symbol
92 1.18 ms 199.54 us 12.79 us ffffffff8a806080 tasklist_lock (rwlock)
The contention count was 92 and the average wait time was around 10 us.
But if I add 100 usec of delay to the tasklist_lock,
$ sudo perf lock con -abl -L tasklist_lock -J 100us@tasklist_lock -- \
sh -c 'for i in $(seq 1000); do sleep 1 & done; wait'
contended total wait max wait avg wait address symbol
190 15.67 ms 230.10 us 82.46 us ffffffff8a806080 tasklist_lock (rwlock)
The contention count increased and the average wait time was up closed
to 100 usec. If I increase the delay even more,
$ sudo perf lock con -abl -L tasklist_lock -J 1ms@tasklist_lock -- \
sh -c 'for i in $(seq 1000); do sleep 1 & done; wait'
contended total wait max wait avg wait address symbol
1002 2.80 s 3.01 ms 2.80 ms ffffffff8a806080 tasklist_lock (rwlock)
Now every sleep process had contention and the wait time was more than 1
msec. This is on my 4 CPU laptop so I guess one CPU has the lock while
other 3 are waiting for it mostly.
For simplicity, it only supports global locks for now.
Committer testing:
root@number:~# grep -m1 'model name' /proc/cpuinfo
model name : AMD Ryzen 9 9950X3D 16-Core Processor
root@number:~# perf lock con -abl -L tasklist_lock -- sh -c 'for i in $(seq 1000); do sleep 1 & done; wait'
contended total wait max wait avg wait address symbol
142 453.85 us 25.39 us 3.20 us ffffffffae808080 tasklist_lock (rwlock)
root@number:~# perf lock con -abl -L tasklist_lock -J 100us@tasklist_lock -- sh -c 'for i in $(seq 1000); do sleep 1 & done; wait'
contended total wait max wait avg wait address symbol
1040 2.39 s 3.11 ms 2.30 ms ffffffffae808080 tasklist_lock (rwlock)
root@number:~# perf lock con -abl -L tasklist_lock -J 1ms@tasklist_lock -- sh -c 'for i in $(seq 1000); do sleep 1 & done; wait'
contended total wait max wait avg wait address symbol
1025 24.72 s 31.01 ms 24.12 ms ffffffffae808080 tasklist_lock (rwlock)
root@number:~#
Suggested-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250509171950.183591-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There was a copy-paste mistake in the installation commands.
Also, we need to install stderr-whitelist.txt file, which contains
allowed messages that are printed on stderr and should not cause test
fail.
Fixes: 097fe67df1aa9cc7 ("perf testsuite: Install perf-report tests in the 'make install-tests -C tools/perf' target")
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250113182605.130719-6-vmolnaro@redhat.com
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For riscv64, enable all BPF_{LOAD_ACQ,STORE_REL} selftests except the
arena_atomics/* ones (not guarded behind CAN_USE_LOAD_ACQ_STORE_REL),
since arena access is not yet supported.
Acked-by: Björn Töpel <bjorn@kernel.org>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com> # QEMU/RVA23
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/9d878fa99a72626208a8eed3c04c4140caf77fda.1746588351.git.yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Verify that 8-, 16- and 32-bit load-acquires are zero-extending by using
immediate values with their highest bit set. Do the same for the 64-bit
variant to keep the style consistent.
Acked-by: Björn Töpel <bjorn@kernel.org>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com> # QEMU/RVA23
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/11097fd515f10308b3941469ee4c86cb8872db3f.1746588351.git.yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, we pass 0x1234567890abcdef to __retval() for the following
two tests:
verifier_load_acquire/load_acquire_64
verifier_store_release/store_release_64
However, the upper 32 bits of that value are being ignored, since
__retval() expects an int. Actually, the tests would still pass even if
I change '__retval(0x1234567890abcdef)' to e.g. '__retval(0x90abcdef)'.
Restructure the tests a bit to test the entire 64-bit values properly.
Do the same to their 8-, 16- and 32-bit variants as well to keep the
style consistent.
Fixes: ff3afe5da998 ("selftests/bpf: Add selftests for load-acquire and store-release instructions")
Acked-by: Björn Töpel <bjorn@kernel.org>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com> # QEMU/RVA23
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/d67f4c6f6ee0d0388cbce1f4892ec4176ee2d604.1746588351.git.yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Instead of open-coding the conditions, use
'#ifdef CAN_USE_LOAD_ACQ_STORE_REL' to guard the following tests:
verifier_precision/bpf_load_acquire
verifier_precision/bpf_store_release
verifier_store_release/*
Note that, for the first two tests in verifier_precision.c, switching to
'#ifdef CAN_USE_LOAD_ACQ_STORE_REL' means also checking if
'__clang_major__ >= 18', which has already been guaranteed by the outer
'#if' check.
Acked-by: Björn Töpel <bjorn@kernel.org>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com> # QEMU/RVA23
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/45d7e025f6e390a8ff36f08fc51e31705ac896bd.1746588351.git.yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Added new test cases for FQ, FQ_CODEL, FQ_PIE, and HHF qdiscs to verify queue
trimming behavior when the qdisc limit is dynamically reduced.
Each test injects packets, reduces the qdisc limit, and checks that the new
limit is enforced. This is still best effort since timing qdisc backlog
is not easy.
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Revert fbbf93556f0c ("selftests: nic_performance: Add selftest for performance of NIC driver")
Revert c087dc54394b ("selftests: nic_link_layer: Add selftest case for speed and duplex states")
Revert 6116075e18f7 ("selftests: nic_link_layer: Add link layer selftest for NIC driver")
These tests don't clean up after themselves, don't use the disruptive
annotations, don't get included in make install etc. etc. The tests
were added before we have any "HW" runner, so the issues were missed.
Our CI doesn't have any way of excluding broken tests, remove these
for now to stop the random pollution of results due to broken env.
We can always add them back once / if fixed.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250507140109.929801-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jakub reports test failures on debug kernel:
FAIL: proc inconsistency after uniq filter for ...
This is because entries are expiring while validation is happening.
Increase the timeout of ctnetlink injected entries and the
icmp (ping) timeout to 1h to avoid this.
To reduce run-time, add less entries via ctnetlink when KSFT_MACHINE_SLOW
is set.
also log of a failed run had:
PASS: dump in netns had same entry count (-C 0, -L 0, -p 0, /proc 0)
... i.e. all entries already expired: add a check and set failure if
this happens.
While at it, include a diff when there were duplicate entries and add
netns name to error messages (it tells if icmp or ctnetlink failed).
Fixes: d33f889fd80c ("selftests: netfilter: add conntrack stress test")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20250506061125.1a244d12@kernel.org/
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20250507075000.5819-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I've found some leaks from 'perf trace -a'.
It seems there are more leaks but this is what I can find for now.
Fixes: 082ab9a18e532864 ("perf trace: Filter out 'sshd' in the tracer ancestry in syswide tracing")
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250403054213.7021-1-namhyung@kernel.org
[ split from a larget patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
I've found some leaks from 'perf trace -a'.
It seems there are more leaks but this is what I can find for now.
Fixes: 70351029b55677eb ("perf thread: Add support for reading the e_machine type for a thread")
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250403054213.7021-1-namhyung@kernel.org
[ split from a larget patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The netkit program is not a cgroup bpf program and should not be shown
in the output of the "bpftool cgroup show" command.
However, if the netkit device happens to have ifindex 3,
the "bpftool cgroup show" command will output the netkit
bpf program as well:
> ip -d link show dev nk1
3: nk1@if2: ...
link/ether ...
netkit mode ...
> bpftool net show
tc:
nk1(3) netkit/peer tw_ns_nk2phy prog_id 469447
> bpftool cgroup show /sys/fs/cgroup/...
ID AttachType AttachFlags Name
... ... ...
469447 netkit_peer tw_ns_nk2phy
The reason is that the target_fd (which is the cgroup_fd here) and
the target_ifindex are in a union in the uapi/linux/bpf.h. The bpftool
iterates all values in "enum bpf_attach_type" which includes
non cgroup attach types like netkit. The cgroup_fd is usually 3 here,
so the bug is triggered when the netkit ifindex just happens
to be 3 as well.
The bpftool's cgroup.c already has a list of cgroup-only attach type
defined in "cgroup_attach_types[]". This patch fixes it by iterating
over "cgroup_attach_types[]" instead of "__MAX_BPF_ATTACH_TYPE".
Cc: Quentin Monnet <qmo@kernel.org>
Reported-by: Takshak Chahande <ctakshak@meta.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/r/20250507203232.1420762-1-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc6).
No conflicts.
Adjacent changes:
net/core/dev.c:
08e9f2d584c4 ("net: Lock netdevices during dev_shutdown")
a82dc19db136 ("net: avoid potential race between netdev_get_by_index_lock() and netns switch")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add debug verbose output to show how evsels were reordered by
parse_events__sort_events_and_fix_groups(). For example:
```
$ perf record -v -e '{instructions,cycles}' true
Using CPUID GenuineIntel-6-B7-1
WARNING: events were regrouped to match PMUs
evlist after sorting/fixing: '{cpu_atom/instructions/,cpu_atom/cycles/},{cpu_core/instructions/,cpu_core/cycles/}'
```
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Levi Yun <yeoreum.yun@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Weilin Wang <weilin.wang@intel.com>
Link: https://lore.kernel.org/r/20250402201549.4090305-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Make groups visible in output:
Before:
{cycles,instructions} ->
cpu_atom/cycles/,cpu_atom/instructions/,cpu_core/cycles/,cpu_core/instructions/
After:
{cycles,instructions} ->
{cpu_atom/cycles/,cpu_atom/instructions/},{cpu_core/cycles/,cpu_core/instructions/}
Committer testing:
Before:
root@number:~# perf record -e '{cycles,instructions,cache-misses}' /tmp/bla
Failed to collect 'cycles,instructions,cache-misses' for the '/tmp/bla' workload: Permission denied
root@number:~#
After:
root@number:~# perf record -e '{cycles,instructions,cache-misses}' /tmp/bla
Failed to collect '{cycles,instructions,cache-misses}' for the '/tmp/bla' workload: Permission denied
root@number:~#
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Levi Yun <yeoreum.yun@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Weilin Wang <weilin.wang@intel.com>
Link: https://lore.kernel.org/r/20250402201549.4090305-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Switch output to using a strbuf so the storage can be resized.
Add a maximum size argument to avoid too much output that may happen for
uncore events.
Rename as scnprintf is no longer used.
Committer testing:
With the patch applied:
root@number:~# perf probe -x ~/bin/perf evlist__format_evsels
Added new event:
probe_perf:evlist_format_evsels (on evlist__format_evsels in /home/acme/bin/perf)
You can now use it in all perf tools, such as:
perf record -e probe_perf:evlist_format_evsels -aR sleep 1
root@number:~# perf probe -l
probe_perf:evlist_format_evsels (on evlist__format_evsels@util/evlist.c in /home/acme/bin/perf)
root@number:~# perf trace -e probe_perf:*/max-stack=10/ perf record -e cycles,instructions,cache-misses /tmp/bla
Failed to collect 'cycles,instructions,cache-misses' for the '/tmp/bla' workload: Permission denied
0.000 perf/3893011 probe_perf:evlist_format_evsels(__probe_ip: 6183397)
evlist__format_evsels (/home/acme/bin/perf)
__cmd_record (/home/acme/bin/perf)
cmd_record (/home/acme/bin/perf)
run_builtin (/home/acme/bin/perf)
handle_internal_command (/home/acme/bin/perf)
run_argv (/home/acme/bin/perf)
main (/home/acme/bin/perf)
__libc_start_call_main (/usr/lib64/libc.so.6)
__libc_start_main@@GLIBC_2.34 (/usr/lib64/libc.so.6)
_start (/home/acme/bin/perf)
root@number:~#
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Levi Yun <yeoreum.yun@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Weilin Wang <weilin.wang@intel.com>
Link: https://lore.kernel.org/r/20250402201549.4090305-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
print_mixed_hw_group_error will print a warning when a group of events
uses different PMUs.
This isn't possible to happen as parse_events__sort_events_and_fix_groups()
will break groups when this happens, adding the warning at the start
of perf of:
WARNING: events were regrouped to match PMUs
As the previous mixed group warning can never happen, remove the
associated code.
Committer testing:
Before/after:
acme@five:~$ perf stat -e '{cpu_core/cycles/,cpu_atom/cycles/}' sleep 1
WARNING: events were regrouped to match PMUs
Performance counter stats for 'sleep 1':
424,895 cpu_atom/cycles/u
<not counted> cpu_core/cycles/u (0.00%)
1.011862314 seconds time elapsed
0.000000000 seconds user
0.003166000 seconds sys
acme@five:~$
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Levi Yun <yeoreum.yun@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Weilin Wang <weilin.wang@intel.com>
Link: https://lore.kernel.org/r/20250402201549.4090305-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN, WiFi and netfilter.
We have still a comple of regressions open due to the recent
drivers locking refactor. The patches are in-flight, but not
ready yet.
Current release - regressions:
- core: lock netdevices during dev_shutdown
- sch_htb: make htb_deactivate() idempotent
- eth: virtio-net: don't re-enable refill work too early
Current release - new code bugs:
- eth: icssg-prueth: fix kernel panic during concurrent Tx queue
access
Previous releases - regressions:
- gre: fix again IPv6 link-local address generation.
- eth: b53: fix learning on VLAN unaware bridges
Previous releases - always broken:
- wifi: fix out-of-bounds access during multi-link element
defragmentation
- can:
- initialize spin lock on device probe
- fix order of unregistration calls
- openvswitch: fix unsafe attribute parsing in output_userspace()
- eth:
- virtio-net: fix total qstat values
- mtk_eth_soc: reset all TX queues on DMA free
- fbnic: firmware IPC mailbox fixes"
* tag 'net-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits)
virtio-net: fix total qstat values
net: export a helper for adding up queue stats
fbnic: Do not allow mailbox to toggle to ready outside fbnic_mbx_poll_tx_ready
fbnic: Pull fbnic_fw_xmit_cap_msg use out of interrupt context
fbnic: Improve responsiveness of fbnic_mbx_poll_tx_ready
fbnic: Cleanup handling of completions
fbnic: Actually flush_tx instead of stalling out
fbnic: Add additional handling of IRQs
fbnic: Gate AXI read/write enabling on FW mailbox
fbnic: Fix initialization of mailbox descriptor rings
net: dsa: b53: do not set learning and unicast/multicast on up
net: dsa: b53: fix learning on VLAN unaware bridges
net: dsa: b53: fix toggling vlan_filtering
net: dsa: b53: do not program vlans when vlan filtering is off
net: dsa: b53: do not allow to configure VLAN 0
net: dsa: b53: always rejoin default untagged VLAN on bridge leave
net: dsa: b53: fix VLAN ID for untagged vlan on bridge leave
net: dsa: b53: fix flushing old pvid VLAN on pvid change
net: dsa: b53: fix clearing PVID of a port
net: dsa: b53: keep CPU port always tagged again
...
|