summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2021-10-25selftests/bpf: Split out bpf_verif_scale selftests into multiple testsAndrii Nakryiko
Instead of using subtests in bpf_verif_scale selftest, turn each scale sub-test into its own test. Each subtest is compltely independent and just reuses a bit of common test running logic, so the conversion is trivial. For convenience, keep all of BPF verifier scale tests in one file. This conversion shaves off a significant amount of time when running test_progs in parallel mode. E.g., just running scale tests (-t verif_scale): BEFORE ====== Summary: 24/0 PASSED, 0 SKIPPED, 0 FAILED real 0m22.894s user 0m0.012s sys 0m22.797s AFTER ===== Summary: 24/0 PASSED, 0 SKIPPED, 0 FAILED real 0m12.044s user 0m0.024s sys 0m27.869s Ten second saving right there. test_progs -j is not yet ready to be turned on by default, unfortunately, and some tests fail almost every time, but this is a good improvement nevertheless. Ignoring few failures, here is sequential vs parallel run times when running all tests now: SEQUENTIAL ========== Summary: 206/953 PASSED, 4 SKIPPED, 0 FAILED real 1m5.625s user 0m4.211s sys 0m31.650s PARALLEL ======== Summary: 204/952 PASSED, 4 SKIPPED, 2 FAILED real 0m35.550s user 0m4.998s sys 0m39.890s Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211022223228.99920-5-andrii@kernel.org
2021-10-25selftests/bpf: Mark tc_redirect selftest as serialAndrii Nakryiko
It seems to cause a lot of harm to kprobe/tracepoint selftests. Yucong mentioned before that it does manipulate sysfs, which might be the reason. So let's mark it as serial, though ideally it would be less intrusive on the system at test. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211022223228.99920-4-andrii@kernel.org
2021-10-25selftests/bpf: Support multiple tests per fileAndrii Nakryiko
Revamp how test discovery works for test_progs and allow multiple test entries per file. Any global void function with no arguments and serial_test_ or test_ prefix is considered a test. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211022223228.99920-3-andrii@kernel.org
2021-10-25selftests/bpf: Normalize selftest entry pointsAndrii Nakryiko
Ensure that all test entry points are global void functions with no input arguments. Mark few subtest entry points as static. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211022223228.99920-2-andrii@kernel.org
2021-10-25kunit: tool: continue past invalid utf-8 outputDaniel Latypov
kunit.py currently crashes and fails to parse kernel output if it's not fully valid utf-8. This can come from memory corruption or just inadvertently printing out binary data as strings. E.g. adding this line into a kunit test pr_info("\x80") will cause this exception UnicodeDecodeError: 'utf-8' codec can't decode byte 0x80 in position 1961: invalid start byte We can tell Python how to handle errors, see https://docs.python.org/3/library/codecs.html#error-handlers Unfortunately, it doesn't seem like there's a way to specify this in just one location, so we need to repeat ourselves quite a bit. Specify `errors='backslashreplace'` so we instead: * print out the offending byte as '\x80' * try and continue parsing the output. * as long as the TAP lines themselves are valid, we're fine. Fixed spelling/grammar in commit log: Shuah Khan <<skhan@linuxfoundation.org> Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Tested-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-10-25perf jevents: Fix some would-be warningsJohn Garry
Before enabling warnings through HOSTCFLAGS, fix the would-be warnings: HOSTCC pmu-events/jevents.o pmu-events/jevents.c:74:22: warning: no previous prototype for ‘convert’ [-Wmissing-prototypes] 74 | enum aggr_mode_class convert(const char *aggr_mode) | ^~~~~~~ pmu-events/jevents.c: In function ‘print_events_table_entry’: pmu-events/jevents.c:373:8: warning: declaration of ‘topic’ shadows a global declaration [-Wshadow] 373 | char *topic = pd->topic; | ^~~~~ pmu-events/jevents.c:316:14: note: shadowed declaration is here 316 | static char *topic; | ^~~~~ pmu-events/jevents.c: In function ‘json_events’: pmu-events/jevents.c:554:9: warning: declaration of ‘func’ shadows a global declaration [-Wshadow] 554 | int (*func)(void *data, struct json_event *je), | ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ pmu-events/jevents.c:85:15: note: shadowed declaration is here 85 | typedef int (*func)(void *data, struct json_event *je); | ^~~~ pmu-events/jevents.c: In function ‘main’: pmu-events/jevents.c:1211:25: warning: initialization discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 1211 | char *err_string_ext = ""; | ^~ pmu-events/jevents.c:1304:17: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 1304 | err_string_ext = " for std arch event"; | ^ Signed-off-by: John Garry <john.garry@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/1634807805-40093-2-git-send-email-john.garry@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-10-25perf dso: Fix /proc/kcore access on 32 bit systemsJames Clark
Because _LARGEFILE64_SOURCE is set in perf, file offset sizes can be 64 bits. If a workflow needs to open /proc/kcore on a 32 bit system (for example to decode Arm ETM kernel trace) then the size value will be wrapped to 32 bits in the function file_size() at this line: dso->data.file_size = st.st_size; Setting the file_size member to be u64 fixes the issue and allows /proc/kcore to be opened. Reported-by: Denis Nikitin <denik@chromium.org> Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20211021112700.112499-1-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-10-25perf build: Suppress 'rm dlfilter' build messageAdrian Hunter
The following build message: rm dlfilters/dlfilter-test-api-v0.o is unwanted. The object file is being treated as an intermediate file and being automatically removed. Mark the object file as .SECONDARY to prevent removal and hence the message. Requested-by: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lore.kernel.org/lkml/20210930062849.110416-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-10-25perf list: Display hybrid PMU events with cpu typeJin Yao
Add a new option '--cputype' to 'perf list' to display core-only PMU events or atom-only PMU events. Each hybrid PMU event has been assigned with a PMU name, this patch compares the PMU name before listing the result. For example: perf list --cputype atom ... cache: core_reject_l2q.any [Counts the number of request that were not accepted into the L2Q because the L2Q is FULL. Unit: cpu_atom] ... The "Unit: cpu_atom" is displayed in the brief description section to indicate this is an atom event. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210903025239.22754-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-10-25perf powerpc: Add support to expose instruction and data address registers ↵Athira Rajeev
as part of extended regs This patch enables presenting Sampled Instruction Address Register (SIAR) and Sampled Data Address Register (SDAR) SPRs as part of extended registers for the perf tool. Add these SPR's to sample_reg_mask in the tool side (to use with -I? option). Reviewed-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20211018114948.16830-3-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-10-25perf powerpc: Refactor the code definition of perf reg extended mask in ↵Athira Rajeev
tools side header file PERF_REG_PMU_MASK_300 and PERF_REG_PMU_MASK_31 defines the mask value for extended registers. Current definition of these mask values uses hex constant and does not use registers by name, making it less readable. Patch refactor the macro values in perf tools side header file by or'ing together the actual register value constants. Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20211018114948.16830-2-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-10-25perf session: Introduce reader EOF functionAlexey Bayduraev
Introduce function to check end-of-file status. Reviewed-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Antonov <alexander.antonov@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Budankov <abudankov@huawei.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Link: https://lore.kernel.org/r/b3b0e0904da01f9ec84d4ae9368df99ecd231598.1634113027.git.alexey.v.bayduraev@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-10-25perf session: Introduce reader return codesAlexey Bayduraev
Add READER_OK and READER_NODATA return codes to make the code more clear. Suggested-by: Jiri Olsa <jolsa@kernel.org> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Riccardo Mancini <rickyman7@gmail.com> Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Tested-by: Riccardo Mancini <rickyman7@gmail.com> Acked-by: Namhyung Kim <namhyung@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Antonov <alexander.antonov@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Budankov <abudankov@huawei.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/5fca481e91c3c5d2ba033d4c6e9b969f8033ab0f.1634113027.git.alexey.v.bayduraev@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-10-25perf session: Move the event read code to a separate functionAlexey Bayduraev
Separate the reading code of a single event to a new reader__read_event() function. Suggested-by: Jiri Olsa <jolsa@kernel.org> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Riccardo Mancini <rickyman7@gmail.com> Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Tested-by: Riccardo Mancini <rickyman7@gmail.com> Acked-by: Namhyung Kim <namhyung@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Antonov <alexander.antonov@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Budankov <abudankov@huawei.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/ffe570d937138dd24f282978ce7ed9c46a06ff9b.1634113027.git.alexey.v.bayduraev@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-10-25perf session: Move unmap code to reader__mmapAlexey Bayduraev
Move the unmapping code to reader__mmap(), so that the mmap code is located together. Move the head/file_offset computation to reader__mmap(), so all the offset computation is located together and in one place only. Suggested-by: Jiri Olsa <jolsa@kernel.org> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Riccardo Mancini <rickyman7@gmail.com> Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Tested-by: Riccardo Mancini <rickyman7@gmail.com> Acked-by: Namhyung Kim <namhyung@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Antonov <alexander.antonov@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Budankov <abudankov@huawei.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/f1c5e17cfa1ecfe912d10b411be203b55d148bc7.1634113027.git.alexey.v.bayduraev@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-10-25perf session: Move reader map code to a separate functionAlexey Bayduraev
Move the mapping code into a separate reader__mmap() function. Suggested-by: Jiri Olsa <jolsa@kernel.org> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Riccardo Mancini <rickyman7@gmail.com> Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Tested-by: Riccardo Mancini <rickyman7@gmail.com> Acked-by: Namhyung Kim <namhyung@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Antonov <alexander.antonov@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Budankov <abudankov@huawei.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/e445de5bb85bbd91287986802d6ed0ce1b419b5a.1634113027.git.alexey.v.bayduraev@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-10-25perf session: Move init/release code to separate functionsAlexey Bayduraev
Separate init/release code into reader__init() and reader__release_decomp() functions. Remove a duplicate call to ui_progress__init_size(), the same call can be found in __perf_session__process_events(). For multiple traces ui_progress should be initialized by total size before reader__init() calls. Suggested-by: Jiri Olsa <jolsa@kernel.org> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Riccardo Mancini <rickyman7@gmail.com> Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Tested-by: Riccardo Mancini <rickyman7@gmail.com> Acked-by: Namhyung Kim <namhyung@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Antonov <alexander.antonov@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Budankov <abudankov@huawei.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/8bacf247de220be8e57af1d2b796322175f5e257.1634113027.git.alexey.v.bayduraev@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-10-25perf session: Introduce decompressor in reader objectAlexey Bayduraev
Introduce a decompressor data structure with pointers to decomp objects and to zstd object. We cannot just move session->zstd_data to decomp_data as session->zstd_data is not only used for decompression. Adding decompressor data object to reader object and introducing active_decomp into perf_session object to select current decompressor. Thus decompression could be executed separately for each data file. Reviewed-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Riccardo Mancini <rickyman7@gmail.com> Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Tested-by: Riccardo Mancini <rickyman7@gmail.com> Acked-by: Namhyung Kim <namhyung@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Antonov <alexander.antonov@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Budankov <abudankov@huawei.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/0eee270cb52aebcbd029c8445d9009fd17709d53.1634113027.git.alexey.v.bayduraev@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-10-25perf session: Move all state items to reader objectAlexey Bayduraev
We need all the state info about reader in separate object to load data from multiple files, so we can keep multiple readers at the same time. Moving all items that need to be kept from reader__process_events to the reader object. Introducing mmap_cur to keep current mapping. Suggested-by: Jiri Olsa <jolsa@kernel.org> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Riccardo Mancini <rickyman7@gmail.com> Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Tested-by: Riccardo Mancini <rickyman7@gmail.com> Acked-by: Namhyung Kim <namhyung@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Antonov <alexander.antonov@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Budankov <abudankov@huawei.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/5c7bdebfaadd7fcb729bd999b181feccaa292e8e.1634113027.git.alexey.v.bayduraev@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-10-25perf intel-pt: Add support for PERF_RECORD_AUX_OUTPUT_HW_IDAdrian Hunter
Originally, software only supported redirecting at most one PEBS event to Intel PT (PEBS-via-PT) because it was not able to differentiate one event from another. To overcome that, add support for the PERF_RECORD_AUX_OUTPUT_HW_ID side-band event. Committer notes: Cast the pointer arg to for_each_set_bit() to (unsigned long *), to fix the build on 32-bit systems. Reviewed-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: x86@kernel.org Link: http://lore.kernel.org/lkml/20210907163903.11820-4-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-10-25selftests: x86: fix [-Wstringop-overread] warn in test_process_vm_readv()Shuah Khan
Fix the following [-Wstringop-overread] by passing in the variable instead of the value. test_vsyscall.c: In function ‘test_process_vm_readv’: test_vsyscall.c:500:22: warning: ‘__builtin_memcmp_eq’ specified bound 4096 exceeds source size 0 [-Wstringop-overread] 500 | if (!memcmp(buf, (const void *)0xffffffffff600000, 4096)) { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-10-25selftests: mlxsw: Reduce test run timeIdo Schimmel
Instead of iterating over all the available trap policers, only perform the tests with three policers: The first, the last and the one in the middle of the range. On a Spectrum-3 system, this reduces the run time from almost an hour to a few minutes. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25selftests: mlxsw: Use permanent neighbours instead of reachable onesIdo Schimmel
The nexthop objects tests configure dummy reachable neighbours so that the nexthops will have a MAC address and be programmed to the device. Since these are dummy reachable neighbours, they can be transitioned by the kernel to a failed state if they are around for too long. This can happen, for example, if the "TIMEOUT" variable is configured with a too high value. Make the tests more robust by configuring the neighbours as permanent, so that the tests do not depend on the configured timeout value. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25selftests: mlxsw: Add helpers for skipping selftestsPetr Machata
A number of mlxsw-specific selftests currently detect whether they are run on a compatible machine, and bail out silently when not. These tests are however done in a somewhat impenetrable manner by directly comparing PCI IDs against a blacklist or a whitelist, and bailing out silently if the machine is not compatible. Instead, add a helper, mlxsw_only_on_spectrum(), which allows specifying the supported machines in a human-readable manner. If the current machine is incompatible, the helper emits a SKIP message and returns an error code, based on which the caller can gracefully bail out in a suitable way. This allows a more readable conditions such as: mlxsw_only_on_spectrum 2+ || return Convert all existing open-coded guards to the new helper. Also add two new guards to do_mark_test() and do_drop_test(), which are supported only on Spectrum-2+, but the corresponding check was not there. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25selftests: net: dsa: add a stress test for unlocked FDB operationsVladimir Oltean
This test is a bit strange in that it is perhaps more manual than others: it does not transmit a clear OK/FAIL verdict, because user space does not have synchronous feedback from the kernel. If a hardware access fails, it is in deferred context. Nonetheless, on sja1105 I have used it successfully to find and solve a concurrency issue, so it can be used as a starting point for other driver maintainers too. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25selftests: lib: forwarding: allow tests to not require mz and jqVladimir Oltean
These programs are useful, but not all selftests require them. Additionally, on embedded boards without package management (things like buildroot), installing mausezahn or jq is not always as trivial as downloading a package from the web. So it is actually a bit annoying to require programs that are not used. Introduce options that can be set by scripts to not enforce these dependencies. For compatibility, default to "yes". Cc: Nikolay Aleksandrov <nikolay@nvidia.com> Cc: Ido Schimmel <idosch@nvidia.com> Cc: Guillaume Nault <gnault@redhat.com> Cc: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25Revert "Merge branch 'dsa-rtnl'"David S. Miller
This reverts commit 965e6b262f48257dbdb51b565ecfd84877a0ab5f, reversing changes made to 4d98bb0d7ec2d0b417df6207b0bafe1868bad9f8.
2021-10-25lkdtm/bugs: Check that a per-task stack canary existsKees Cook
Introduce REPORT_STACK_CANARY to check for differing stack canaries between two processes (i.e. that an architecture is correctly implementing per-task stack canaries), using the task_struct canary as the hint to locate in the stack. Requires that one of the processes being tested not be pid 1. Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20211022223826.330653-3-keescook@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-25selftests/lkdtm: Add way to repeat a testKees Cook
Some LKDTM tests need to be run more than once (usually to setup and then later trigger). Until now, the only case was the SOFT_LOCKUP test, which wasn't useful to run in the bulk selftests. The coming stack canary checking needs to run twice, so support this with a new test output prefix "repeat". Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20211022223826.330653-2-keescook@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-24selftests: net: dsa: add a stress test for unlocked FDB operationsVladimir Oltean
This test is a bit strange in that it is perhaps more manual than others: it does not transmit a clear OK/FAIL verdict, because user space does not have synchronous feedback from the kernel. If a hardware access fails, it is in deferred context. Nonetheless, on sja1105 I have used it successfully to find and solve a concurrency issue, so it can be used as a starting point for other driver maintainers too. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24selftests: lib: forwarding: allow tests to not require mz and jqVladimir Oltean
These programs are useful, but not all selftests require them. Additionally, on embedded boards without package management (things like buildroot), installing mausezahn or jq is not always as trivial as downloading a package from the web. So it is actually a bit annoying to require programs that are not used. Introduce options that can be set by scripts to not enforce these dependencies. For compatibility, default to "yes". Cc: Nikolay Aleksandrov <nikolay@nvidia.com> Cc: Ido Schimmel <idosch@nvidia.com> Cc: Guillaume Nault <gnault@redhat.com> Cc: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-22libbpf: Fix BTF header parsing checksAndrii Nakryiko
Original code assumed fixed and correct BTF header length. That's not always the case, though, so fix this bug with a proper additional check. And use actual header length instead of sizeof(struct btf_header) in sanity checks. Fixes: 8a138aed4a80 ("bpf: btf: Add BTF support to libbpf") Reported-by: Evgeny Vereshchagin <evvers@ya.ru> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211023003157.726961-2-andrii@kernel.org
2021-10-22libbpf: Fix overflow in BTF sanity checksAndrii Nakryiko
btf_header's str_off+str_len or type_off+type_len can overflow as they are u32s. This will lead to bypassing the sanity checks during BTF parsing, resulting in crashes afterwards. Fix by using 64-bit signed integers for comparison. Fixes: d8123624506c ("libbpf: Fix BTF data layout checks and allow empty BTF") Reported-by: Evgeny Vereshchagin <evvers@ya.ru> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211023003157.726961-1-andrii@kernel.org
2021-10-22selftests/bpf: Add BTF_KIND_DECL_TAG typedef example in tag.cYonghong Song
Change value type in progs/tag.c to a typedef with a btf_decl_tag. With `bpftool btf dump file tag.o`, we have ... [14] TYPEDEF 'value_t' type_id=17 [15] DECL_TAG 'tag1' type_id=14 component_idx=-1 [16] DECL_TAG 'tag2' type_id=14 component_idx=-1 [17] STRUCT '(anon)' size=8 vlen=2 'a' type_id=2 bits_offset=0 'b' type_id=2 bits_offset=32 ... The btf_tag selftest also succeeded: $ ./test_progs -t tag #21 btf_tag:OK Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211021195643.4020315-1-yhs@fb.com
2021-10-22selftests/bpf: Test deduplication for BTF_KIND_DECL_TAG typedefYonghong Song
Add unit tests for deduplication of BTF_KIND_DECL_TAG to typedef types. Also changed a few comments from "tag" to "decl_tag" to match BTF_KIND_DECL_TAG enum value name. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211021195638.4019770-1-yhs@fb.com
2021-10-22selftests/bpf: Add BTF_KIND_DECL_TAG typedef unit testsYonghong Song
Test good and bad variants of typedef BTF_KIND_DECL_TAG encoding. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211021195633.4019472-1-yhs@fb.com
2021-10-22selftests/bpf: Fix flow dissector testsStanislav Fomichev
- update custom loader to search by name, not section name - update bpftool commands to use proper pin path Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211021214814.1236114-4-sdf@google.com
2021-10-22libbpf: Use func name when pinning programs with LIBBPF_STRICT_SEC_NAMEStanislav Fomichev
We can't use section name anymore because they are not unique and pinning objects with multiple programs with the same progtype/secname will fail. [0] Closes: https://github.com/libbpf/libbpf/issues/273 Fixes: 33a2c75c55e2 ("libbpf: add internal pin_name") Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20211021214814.1236114-2-sdf@google.com
2021-10-22bpftool: Avoid leaking the JSON writer prepared for program metadataQuentin Monnet
Bpftool creates a new JSON object for writing program metadata in plain text mode, regardless of metadata being present or not. Then this writer is freed if any metadata has been found and printed, but it leaks otherwise. We cannot destroy the object unconditionally, because the destructor prints an undesirable line break. Instead, make sure the writer is created only after we have found program metadata to print. Found with valgrind. Fixes: aff52e685eb3 ("bpftool: Support dumping metadata") Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211022094743.11052-1-quentin@isovalent.com
2021-10-22selftests/bpf: Switch to new btf__type_cnt/btf__raw_data APIsHengqi Chen
Replace the calls to btf__get_nr_types/btf__get_raw_data in selftests with new APIs btf__type_cnt/btf__raw_data. The old APIs will be deprecated in libbpf v0.7+. Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211022130623.1548429-6-hengqi.chen@gmail.com
2021-10-22bpftool: Switch to new btf__type_cnt APIHengqi Chen
Replace the call to btf__get_nr_types with new API btf__type_cnt. The old API will be deprecated in libbpf v0.7+. No functionality change. Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211022130623.1548429-5-hengqi.chen@gmail.com
2021-10-22tools/resolve_btfids: Switch to new btf__type_cnt APIHengqi Chen
Replace the call to btf__get_nr_types with new API btf__type_cnt. The old API will be deprecated in libbpf v0.7+. No functionality change. Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211022130623.1548429-4-hengqi.chen@gmail.com
2021-10-22perf bpf: Switch to new btf__raw_data APIHengqi Chen
Replace the call to btf__get_raw_data with new API btf__raw_data. The old APIs will be deprecated in libbpf v0.7+. No functionality change. Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211022130623.1548429-3-hengqi.chen@gmail.com
2021-10-22libbpf: Add btf__type_cnt() and btf__raw_data() APIsHengqi Chen
Add btf__type_cnt() and btf__raw_data() APIs and deprecate btf__get_nr_type() and btf__get_raw_data() since the old APIs don't follow the libbpf naming convention for getters which omit 'get' in the name (see [0]). btf__raw_data() is just an alias to the existing btf__get_raw_data(). btf__type_cnt() now returns the number of all types of the BTF object including 'void'. [0] Closes: https://github.com/libbpf/libbpf/issues/279 Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211022130623.1548429-2-hengqi.chen@gmail.com
2021-10-22libbpf: Fix memory leak in btf__dedup()Mauricio Vásquez
Free btf_dedup if btf_ensure_modifiable() returns error. Fixes: 919d2b1dbb07 ("libbpf: Allow modification of BTF and add btf__add_str API") Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211022202035.48868-1-mauricio@kinvolk.io
2021-10-22selftests/bpf: Make perf_buffer selftests work on 4.9 kernel againAndrii Nakryiko
Recent change to use tp/syscalls/sys_enter_nanosleep for perf_buffer selftests causes this selftest to fail on 4.9 kernel in libbpf CI ([0]): libbpf: prog 'handle_sys_enter': failed to attach to perf_event FD 6: Invalid argument libbpf: prog 'handle_sys_enter': failed to attach to tracepoint 'syscalls/sys_enter_nanosleep': Invalid argument It's not exactly clear why, because perf_event itself is created for this tracepoint, but I can't even compile 4.9 kernel locally, so it's hard to figure this out. If anyone has better luck and would like to help investigating this, I'd really appreciate this. For now, unblock CI by switching back to raw_syscalls/sys_enter, but reduce amount of unnecessary samples emitted by filter by process ID. Use explicit ARRAY map for that to make it work on 4.9 as well, because global data isn't yet supported there. Fixes: aa274f98b269 ("selftests/bpf: Fix possible/online index mismatch in perf_buffer test") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211022201342.3490692-1-andrii@kernel.org
2021-10-22libbpf: Fix the use of aligned attributeAndrii Nakryiko
Building libbpf sources out of kernel tree (in Github repo) we run into compilation error due to unknown __aligned attribute. It must be coming from some kernel header, which is not available to Github sources. Use explicit __attribute__((aligned(16))) instead. Fixes: 961632d54163 ("libbpf: Fix dumping non-aligned __int128") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211022192502.2975553-1-andrii@kernel.org
2021-10-22fcnal-test: kill hanging ping/nettest binaries on cleanupFlorian Westphal
On my box I see a bunch of ping/nettest processes hanging around after fcntal-test.sh is done. Clean those up before netns deletion. Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20211021140247.29691-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22KVM: selftests: Fix nested SVM tests when built with clangJim Mattson
Though gcc conveniently compiles a simple memset to "rep stos," clang prefers to call the libc version of memset. If a test is dynamically linked, the libc memset isn't available in L1 (nor is the PLT or the GOT, for that matter). Even if the test is statically linked, the libc memset may choose to use some CPU features, like AVX, which may not be enabled in L1. Note that __builtin_memset doesn't solve the problem, because (a) the compiler is free to call memset anyway, and (b) __builtin_memset may also choose to use features like AVX, which may not be available in L1. To avoid a myriad of problems, use an explicit "rep stos" to clear the VMCB in generic_svm_setup(), which is called both from L0 and L1. Reported-by: Ricardo Koller <ricarkol@google.com> Signed-off-by: Jim Mattson <jmattson@google.com> Fixes: 20ba262f8631a ("selftests: KVM: AMD Nested test infrastructure") Message-Id: <20210930003649.4026553-1-jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Lots of simnple overlapping additions. With a build fix from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 07:40:47 +0000