| Age | Commit message (Collapse) | Author |
|---|
|
Pull io_uring fixes from Jens Axboe:
- A single fix for over-eager retries for networking (Pavel)
- Revert the notification slot support for zerocopy sends.
It turns out that even after more than a year or development and
testing, there's not full agreement on whether just using plain
ordered notifications is Good Enough to avoid the complexity of using
the notifications slots. Because of that, we decided that it's best
left to a future final decision.
We can always bring back this feature, but we can't really change it
or remove it once we've released 6.0 with it enabled. The reverts
leave the usual CQE notifications as the primary interface for
knowing when data was sent, and when it was acked. (Pavel)
* tag 'io_uring-6.0-2022-09-02' of git://git.kernel.dk/linux-block:
selftests/net: return back io_uring zc send tests
io_uring/net: simplify zerocopy send user API
io_uring/notif: remove notif registration
Revert "io_uring: rename IORING_OP_FILES_UPDATE"
Revert "io_uring: add zc notification flush requests"
selftests/net: temporarily disable io_uring zc test
io_uring/net: fix overexcessive retries
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fix from Mickaël Salaün:
"This fixes a mis-handling of the LANDLOCK_ACCESS_FS_REFER right when
multiple rulesets/domains are stacked.
The expected behaviour was that an additional ruleset can only
restrict the set of permitted operations, but in this particular case,
it was potentially possible to re-gain the LANDLOCK_ACCESS_FS_REFER
right"
* tag 'landlock-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Fix file reparenting without explicit LANDLOCK_ACCESS_FS_REFER
|
|
In perf/Documentation/perf-stat.txt, for "--td-level" the default "0" means
the max level that the current hardware support.
So we need initialize the stat_config.topdown_level to TOPDOWN_MAX_LEVEL
when “--td-level=0” or no “--td-level” option. Otherwise, for the
hardware with a max level is 2, the 2nd level metrics disappear for raw
events in this case.
The issue cannot be observed for the perf stat default or "--topdown"
options. This commit fixes the raw events issue and removes the
duplicated code for the perf stat default.
Before:
# ./perf stat -e "cpu-clock,context-switches,cpu-migrations,page-faults,instructions,cycles,ref-cycles,branches,branch-misses,{slots,topdown-retiring,topdown-bad-spec,topdown-fe-bound,topdown-be-bound,topdown-heavy-ops,topdown-br-mispredict,topdown-fetch-lat,topdown-mem-bound}" sleep 1
Performance counter stats for 'sleep 1':
1.03 msec cpu-clock # 0.001 CPUs utilized
1 context-switches # 966.216 /sec
0 cpu-migrations # 0.000 /sec
60 page-faults # 57.973 K/sec
1,132,112 instructions # 1.41 insn per cycle
803,872 cycles # 0.777 GHz
1,909,120 ref-cycles # 1.845 G/sec
236,634 branches # 228.640 M/sec
6,367 branch-misses # 2.69% of all branches
4,823,232 slots # 4.660 G/sec
1,210,536 topdown-retiring # 25.1% Retiring
699,841 topdown-bad-spec # 14.5% Bad Speculation
1,777,975 topdown-fe-bound # 36.9% Frontend Bound
1,134,878 topdown-be-bound # 23.5% Backend Bound
189,146 topdown-heavy-ops # 182.756 M/sec
662,012 topdown-br-mispredict # 639.647 M/sec
1,097,048 topdown-fetch-lat # 1.060 G/sec
416,121 topdown-mem-bound # 402.063 M/sec
1.002423690 seconds time elapsed
0.002494000 seconds user
0.000000000 seconds sys
After:
# ./perf stat -e "cpu-clock,context-switches,cpu-migrations,page-faults,instructions,cycles,ref-cycles,branches,branch-misses,{slots,topdown-retiring,topdown-bad-spec,topdown-fe-bound,topdown-be-bound,topdown-heavy-ops,topdown-br-mispredict,topdown-fetch-lat,topdown-mem-bound}" sleep 1
Performance counter stats for 'sleep 1':
1.13 msec cpu-clock # 0.001 CPUs utilized
1 context-switches # 882.128 /sec
0 cpu-migrations # 0.000 /sec
61 page-faults # 53.810 K/sec
1,137,612 instructions # 1.29 insn per cycle
881,477 cycles # 0.778 GHz
2,093,496 ref-cycles # 1.847 G/sec
236,356 branches # 208.496 M/sec
7,090 branch-misses # 3.00% of all branches
5,288,862 slots # 4.665 G/sec
1,223,697 topdown-retiring # 23.1% Retiring
767,403 topdown-bad-spec # 14.5% Bad Speculation
2,053,322 topdown-fe-bound # 38.8% Frontend Bound
1,244,438 topdown-be-bound # 23.5% Backend Bound
186,665 topdown-heavy-ops # 3.5% Heavy Operations # 19.6% Light Operations
725,922 topdown-br-mispredict # 13.7% Branch Mispredict # 0.8% Machine Clears
1,327,400 topdown-fetch-lat # 25.1% Fetch Latency # 13.7% Fetch Bandwidth
497,775 topdown-mem-bound # 9.4% Memory Bound # 14.1% Core Bound
1.002701530 seconds time elapsed
0.002744000 seconds user
0.000000000 seconds sys
Fixes: 63e39aa6ae103451 ("perf stat: Support L2 Topdown events")
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220826140057.3289401-1-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The put lowers the reference count to 0 and frees ctx, reading it
afterwards is invalid. Move the put after the uses and determine the
last use by the reference count being 1.
Fixes: 39e940d4abfa ("selftests/xsk: Destroy BPF resources only when ctx refcount drops to 0")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220901202645.1463552-1-irogers@google.com
|
|
BPF object files are, in a way, the final artifact produced as part of
the ahead-of-time compilation process. That makes them somewhat special
compared to "regular" object files, which are a intermediate build
artifacts that can typically be removed safely. As such, it can make
sense to name them differently to make it easier to spot this difference
at a glance.
Among others, libbpf-bootstrap [0] has established the extension .bpf.o
for BPF object files. It seems reasonable to follow this example and
establish the same denomination for selftest build artifacts. To that
end, this change adjusts the corresponding part of the build system and
the test programs loading BPF object files to work with .bpf.o files.
[0] https://github.com/libbpf/libbpf-bootstrap
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220901222253.1199242-1-deso@posteo.net
|
|
Introduce new mode to xdpxceiver responsible for testing AF_XDP zero
copy support of driver that serves underlying physical device. When
setting up test suite, determine whether driver has ZC support or not by
trying to bind XSK ZC socket to the interface. If it succeeded,
interpret it as ZC support being in place and do softirq and busy poll
tests for zero copy mode.
Note that Rx dropped tests are skipped since ZC path is not touching
rx_dropped stat at all.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220901114813.16275-7-maciej.fijalkowski@intel.com
|
|
For single threaded poll tests call pthread_kill() from main thread so
that we are sure worker thread has finished its job and it is possible
to proceed with next test types from test suite. It was observed that on
some platforms it takes a bit longer for worker thread to exit and next
test case sees device as busy in this case.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220901114813.16275-6-maciej.fijalkowski@intel.com
|
|
Currently, architecture of xdpxceiver is designed strictly for
conducting veth based tests. Veth pair is created together with a
network namespace and one of the veth interfaces is moved to the
mentioned netns. Then, separate threads for Tx and Rx are spawned which
will utilize described setup.
Infrastructure described in the paragraph above can not be used for
testing AF_XDP support on physical devices. That testing will be
conducted on a single network interface and same queue. Xskxceiver
needs to be extended to distinguish between veth tests and physical
interface tests.
Since same iface/queue id pair will be used by both Tx/Rx threads for
physical device testing, Tx thread, which happen to run after the Rx
thread, is going to create XSK socket with shared umem flag. In order to
track this setting throughout the lifetime of spawned threads, introduce
'shared_umem' boolean variable to struct ifobject and set it to true
when xdpxceiver is run against physical device. In such case, UMEM size
needs to be doubled, so half of it will be used by Rx thread and other
half by Tx thread. For two step based test types, value of XSKMAP
element under key 0 has to be updated as there is now another socket for
the second step. Also, to avoid race conditions when destroying XSK
resources, move this activity to the main thread after spawned Rx and Tx
threads have finished its job. This way it is possible to gracefully
remove shared umem without introducing synchronization mechanisms.
To run xsk selftests suite on physical device, append "-i $IFACE" when
invoking test_xsk.sh. For veth based tests, simply skip it. When "-i
$IFACE" is in place, under the hood test_xsk.sh will use $IFACE for both
interfaces supplied to xdpxceiver, which in turn will interpret that
this execution of test suite is for a physical device.
Note that currently this makes it possible only to test SKB and DRV mode
(in case underlying device has native XDP support). ZC testing support
is added in a later patch.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220901114813.16275-5-maciej.fijalkowski@intel.com
|
|
So that "enp240s0f0" or such name can be used against xskxceiver.
While at it, also extend character count for netns name.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220901114813.16275-4-maciej.fijalkowski@intel.com
|
|
In order to prepare xdpxceiver for physical device testing, let us
introduce default Rx pkt stream. Reason for doing it is that physical
device testing will use a UMEM with a doubled size where half of it will
be used by Tx and other half by Rx. This means that pkt addresses will
differ for Tx and Rx streams. Rx thread will initialize the
xsk_umem_info::base_addr that is added here so that pkt_set(), when
working on Rx UMEM will add this offset and second half of UMEM space
will be used. Note that currently base_addr is 0 on both sides. Future
commit will do the mentioned initialization.
Previously, veth based testing worked on separate UMEMs, so single
default stream was fine.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220901114813.16275-3-maciej.fijalkowski@intel.com
|
|
Currently, xdpxceiver assumes that underlying device supports XDP in
native mode - it is fine by now since tests can run only on a veth pair.
Future commit is going to allow running test suite against physical
devices, so let us query the device if it is capable of running XDP
programs in native mode. This way xdpxceiver will not try to run
TEST_MODE_DRV if device being tested is not supporting it.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220901114813.16275-2-maciej.fijalkowski@intel.com
|
|
This change fixes a mis-handling of the LANDLOCK_ACCESS_FS_REFER right
when multiple rulesets/domains are stacked. The expected behaviour was
that an additional ruleset can only restrict the set of permitted
operations, but in this particular case, it was potentially possible to
re-gain the LANDLOCK_ACCESS_FS_REFER right.
With the introduction of LANDLOCK_ACCESS_FS_REFER, we added the first
globally denied-by-default access right. Indeed, this lifted an initial
Landlock limitation to rename and link files, which was initially always
denied when the source or the destination were different directories.
This led to an inconsistent backward compatibility behavior which was
only taken into account if no domain layer were using the new
LANDLOCK_ACCESS_FS_REFER right. However, when restricting a thread with
a new ruleset handling LANDLOCK_ACCESS_FS_REFER, all inherited parent
rulesets/layers not explicitly handling LANDLOCK_ACCESS_FS_REFER would
behave as if they were handling this access right and with all their
rules allowing it. This means that renaming and linking files could
became allowed by these parent layers, but all the other required
accesses must also be granted: all layers must allow file removal or
creation, and renaming and linking operations cannot lead to privilege
escalation according to the Landlock policy. See detailed explanation
in commit b91c3e4ea756 ("landlock: Add support for file reparenting with
LANDLOCK_ACCESS_FS_REFER").
To say it another way, this bug may lift the renaming and linking
limitations of the initial Landlock version, and a same ruleset can
enforce different restrictions depending on previous or next enforced
ruleset (i.e. inconsistent behavior). The LANDLOCK_ACCESS_FS_REFER right
cannot give access to data not already allowed, but this doesn't follow
the contract of the first Landlock ABI. This fix puts back the
limitation for sandboxes that didn't opt-in for this additional right.
For instance, if a first ruleset allows LANDLOCK_ACCESS_FS_MAKE_REG on
/dst and LANDLOCK_ACCESS_FS_REMOVE_FILE on /src, renaming /src/file to
/dst/file is denied. However, without this fix, stacking a new ruleset
which allows LANDLOCK_ACCESS_FS_REFER on / would now permit the
sandboxed thread to rename /src/file to /dst/file .
This change fixes the (absolute) rule access rights, which now always
forbid LANDLOCK_ACCESS_FS_REFER except when it is explicitly allowed
when creating a rule.
Making all domain handle LANDLOCK_ACCESS_FS_REFER was an initial
approach but there is two downsides:
* it makes the code more complex because we still want to check that a
rule allowing LANDLOCK_ACCESS_FS_REFER is legitimate according to the
ruleset's handled access rights (i.e. ABI v1 != ABI v2);
* it would not allow to identify if the user created a ruleset
explicitly handling LANDLOCK_ACCESS_FS_REFER or not, which will be an
issue to audit Landlock.
Instead, this change adds an ACCESS_INITIALLY_DENIED list of
denied-by-default rights, which (only) contains
LANDLOCK_ACCESS_FS_REFER. All domains are treated as if they are also
handling this list, but without modifying their fs_access_masks field.
A side effect is that the errno code returned by rename(2) or link(2)
*may* be changed from EXDEV to EACCES according to the enforced
restrictions. Indeed, we now have the mechanic to identify if an access
is denied because of a required right (e.g. LANDLOCK_ACCESS_FS_MAKE_REG,
LANDLOCK_ACCESS_FS_REMOVE_FILE) or if it is denied because of missing
LANDLOCK_ACCESS_FS_REFER rights. This may result in different errno
codes than for the initial Landlock version, but this approach is more
consistent and better for rename/link compatibility reasons, and it
wasn't possible before (hence no backport to ABI v1). The
layout1.rename_file test reflects this change.
Add 4 layout1.refer_denied_by_default* test suites to check that the
behavior of a ruleset not handling LANDLOCK_ACCESS_FS_REFER (ABI v1) is
unchanged even if another layer handles LANDLOCK_ACCESS_FS_REFER (i.e.
ABI v1 precedence). Make sure rule's absolute access rights are correct
by testing with and without a matching path. Add test_rename() and
test_exchange() helpers.
Extend layout1.inval tests to check that a denied-by-default access
right is not necessarily part of a domain's handled access rights.
Test coverage for security/landlock is 95.3% of 599 lines according to
gcc/gcov-11.
Fixes: b91c3e4ea756 ("landlock: Add support for file reparenting with LANDLOCK_ACCESS_FS_REFER")
Reviewed-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Günther Noack <gnoack3000@gmail.com>
Link: https://lore.kernel.org/r/20220831203840.1370732-1-mic@digikod.net
Cc: stable@vger.kernel.org
[mic: Constify and slightly simplify test helpers]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Get the tunnel flags in {ipv6}vxlan_get_tunnel_src and ensure they are
aligned with tunnel params set at {ipv6}vxlan_set_tunnel_dst.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220831144010.174110-2-shmulik.ladkani@gmail.com
|
|
Existing 'bpf_skb_get_tunnel_key' extracts various tunnel parameters
(id, ttl, tos, local and remote) but does not expose ip_tunnel_info's
tun_flags to the BPF program.
It makes sense to expose tun_flags to the BPF program.
Assume for example multiple GRE tunnels maintained on a single GRE
interface in collect_md mode. The program expects origins to initiate
over GRE, however different origins use different GRE characteristics
(e.g. some prefer to use GRE checksum, some do not; some pass a GRE key,
some do not, etc..).
A BPF program getting tun_flags can therefore remember the relevant
flags (e.g. TUNNEL_CSUM, TUNNEL_SEQ...) for each initiating remote. In
the reply path, the program can use 'bpf_skb_set_tunnel_key' in order
to correctly reply to the remote, using similar characteristics, based
on the stored tunnel flags.
Introduce BPF_F_TUNINFO_FLAGS flag for bpf_skb_get_tunnel_key. If
specified, 'bpf_tunnel_key->tunnel_flags' is set with the tun_flags.
Decided to use the existing unused 'tunnel_ext' as the storage for the
'tunnel_flags' in order to avoid changing bpf_tunnel_key's layout.
Also, the following has been considered during the design:
1. Convert the "interesting" internal TUNNEL_xxx flags back to BPF_F_yyy
and place into the new 'tunnel_flags' field. This has 2 drawbacks:
- The BPF_F_yyy flags are from *set_tunnel_key* enumeration space,
e.g. BPF_F_ZERO_CSUM_TX. It is awkward that it is "returned" into
tunnel_flags from a *get_tunnel_key* call.
- Not all "interesting" TUNNEL_xxx flags can be mapped to existing
BPF_F_yyy flags, and it doesn't make sense to create new BPF_F_yyy
flags just for purposes of the returned tunnel_flags.
2. Place key.tun_flags into 'tunnel_flags' but mask them, keeping only
"interesting" flags. That's ok, but the drawback is that what's
"interesting" for my usecase might be limiting for other usecases.
Therefore I decided to expose what's in key.tun_flags *as is*, which seems
most flexible. The BPF user can just choose to ignore bits he's not
interested in. The TUNNEL_xxx are also UAPI, so no harm exposing them
back in the get_tunnel_key call.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220831144010.174110-1-shmulik.ladkani@gmail.com
|
|
This has been validated on the Ocelot/Felix switch family (NXP LS1028A)
and should be relevant to any switch driver that offloads the tc-flower
and/or tc-matchall actions trap, drop, accept, mirred, for which DSA has
operations.
TEST: gact drop and ok (skip_hw) [ OK ]
TEST: mirred egress flower redirect (skip_hw) [ OK ]
TEST: mirred egress flower mirror (skip_hw) [ OK ]
TEST: mirred egress matchall mirror (skip_hw) [ OK ]
TEST: mirred_egress_to_ingress (skip_hw) [ OK ]
TEST: gact drop and ok (skip_sw) [ OK ]
TEST: mirred egress flower redirect (skip_sw) [ OK ]
TEST: mirred egress flower mirror (skip_sw) [ OK ]
TEST: mirred egress matchall mirror (skip_sw) [ OK ]
TEST: trap (skip_sw) [ OK ]
TEST: mirred_egress_to_ingress (skip_sw) [ OK ]
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220831170839.931184-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
PCI interpretation compile fixes
|
|
tools/testing/selftests/net/.gitignore
sort the net-next version and use it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Under full preemptible kernel, task local storage lookup operations on
the same CPU may update per-cpu bpf_task_storage_busy concurrently. If
the update of bpf_task_storage_busy is not preemption safe, the final
value of bpf_task_storage_busy may become not-zero forever and
bpf_task_storage_trylock() will always fail. So add a test case to
ensure the update of bpf_task_storage_busy is preemption safe.
Will skip the test case when CONFIG_PREEMPT is disabled, and it can only
reproduce the problem probabilistically. By increasing
TASK_STORAGE_MAP_NR_LOOP and running it under ARM64 VM with 4-cpus, it
takes about four rounds to reproduce:
> test_maps is modified to only run test_task_storage_map_stress_lookup()
$ export TASK_STORAGE_MAP_NR_THREAD=256
$ export TASK_STORAGE_MAP_NR_LOOP=81920
$ export TASK_STORAGE_MAP_PIN_CPU=1
$ time ./test_maps
test_task_storage_map_stress_lookup(135):FAIL:bad bpf_task_storage_busy got -2
real 0m24.743s
user 0m6.772s
sys 0m17.966s
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20220901061938.3789460-5-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
sys_pidfd_open() is defined twice in both test_bprm_opts.c and
test_local_storage.c, so move it to a common header file. And it will be
used in map_tests as well.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20220901061938.3789460-4-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth, bpf and wireless.
Current release - regressions:
- bpf:
- fix wrong last sg check in sk_msg_recvmsg()
- fix kernel BUG in purge_effective_progs()
- mac80211:
- fix possible leak in ieee80211_tx_control_port()
- potential NULL dereference in ieee80211_tx_control_port()
Current release - new code bugs:
- nfp: fix the access to management firmware hanging
Previous releases - regressions:
- ip: fix triggering of 'icmp redirect'
- sched: tbf: don't call qdisc_put() while holding tree lock
- bpf: fix corrupted packets for XDP_SHARED_UMEM
- bluetooth: hci_sync: fix suspend performance regression
- micrel: fix probe failure
Previous releases - always broken:
- tcp: make global challenge ack rate limitation per net-ns and
default disabled
- tg3: fix potential hang-up on system reboot
- mac802154: fix reception for no-daddr packets
Misc:
- r8152: add PID for the lenovo onelink+ dock"
* tag 'net-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (56 commits)
net/smc: Remove redundant refcount increase
Revert "sch_cake: Return __NET_XMIT_STOLEN when consuming enqueued skb"
tcp: make global challenge ack rate limitation per net-ns and default disabled
tcp: annotate data-race around challenge_timestamp
net: dsa: hellcreek: Print warning only once
ip: fix triggering of 'icmp redirect'
sch_cake: Return __NET_XMIT_STOLEN when consuming enqueued skb
selftests: net: sort .gitignore file
Documentation: networking: correct possessive "its"
kcm: fix strp_init() order and cleanup
mlxbf_gige: compute MDIO period based on i1clk
ethernet: rocker: fix sleep in atomic context bug in neigh_timer_handler
net: lan966x: improve error handle in lan966x_fdma_rx_get_frame()
nfp: fix the access to management firmware hanging
net: phy: micrel: Make the GPIO to be non-exclusive
net: virtio_net: fix notification coalescing comments
net/sched: fix netdevice reference leaks in attach_default_qdiscs()
net: sched: tbf: don't call qdisc_put() while holding tree lock
net: Use u64_stats_fetch_begin_irq() for stats fetch.
net: dsa: xrs700x: Use irqsave variant for u64 stats update
...
|
|
Enable io_uring zerocopy send tests back and fix them up to follow the
new inteface.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c8e5018c516093bdad0b6e19f2f9847dea17e4d2.1662027856.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We're going to change API, to avoid build problems with a couple of
following commits, disable io_uring testing.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/12b7507223df04fbd12aa05fc0cb544b51d7ed79.1662027856.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The IP_UNICAST_IF socket option is used to set the outgoing interface
for outbound packets.
The IP_UNICAST_IF socket option was added as it was needed by the
Wine project, since no other existing option (SO_BINDTODEVICE socket
option, IP_PKTINFO socket option or the bind function) provided the
needed characteristics needed by the IP_UNICAST_IF socket option. [1]
The IP_UNICAST_IF socket option works well for unconnected sockets,
that is, the interface specified by the IP_UNICAST_IF socket option
is taken into consideration in the route lookup process when a packet
is being sent. However, for connected sockets, the outbound interface
is chosen when connecting the socket, and in the route lookup process
which is done when a packet is being sent, the interface specified by
the IP_UNICAST_IF socket option is being ignored.
This inconsistent behavior was reported and discussed in an issue
opened on systemd's GitHub project [2]. Also, a bug report was
submitted in the kernel's bugzilla [3].
To understand the problem in more detail, we can look at what happens
for UDP packets over IPv4 (The same analysis was done separately in
the referenced systemd issue).
When a UDP packet is sent the udp_sendmsg function gets called and
the following happens:
1. The oif member of the struct ipcm_cookie ipc (which stores the
output interface of the packet) is initialized by the ipcm_init_sk
function to inet->sk.sk_bound_dev_if (the device set by the
SO_BINDTODEVICE socket option).
2. If the IP_PKTINFO socket option was set, the oif member gets
overridden by the call to the ip_cmsg_send function.
3. If no output interface was selected yet, the interface specified
by the IP_UNICAST_IF socket option is used.
4. If the socket is connected and no destination address is
specified in the send function, the struct ipcm_cookie ipc is not
taken into consideration and the cached route, that was calculated in
the connect function is being used.
Thus, for a connected socket, the IP_UNICAST_IF sockopt isn't taken
into consideration.
This patch corrects the behavior of the IP_UNICAST_IF socket option
for connect()ed sockets by taking into consideration the
IP_UNICAST_IF sockopt when connecting the socket.
In order to avoid reconnecting the socket, this option is still
ignored when applied on an already connected socket until connect()
is called again by the Richard Gobert.
Change the __ip4_datagram_connect function, which is called during
socket connection, to take into consideration the interface set by
the IP_UNICAST_IF socket option, in a similar way to what is done in
the udp_sendmsg function.
[1] https://lore.kernel.org/netdev/1328685717.4736.4.camel@edumazet-laptop/T/
[2] https://github.com/systemd/systemd/issues/11935#issuecomment-618691018
[3] https://bugzilla.kernel.org/show_bug.cgi?id=210255
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220829111554.GA1771@debian
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
One test demonstrates the reentrancy of hash map update on the same
bucket should fail, and another one shows concureently updates of
the same hash map bucket should succeed and not fail due to
the reentrancy checking for bucket lock.
There is no trampoline support on s390x, so move htab_update to
denylist.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20220831042629.130006-4-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
This patch adds a test to ensure bpf_setsockopt(TCP_CONGESTION, "not_exist")
will not trigger the kernel module autoload.
Before the fix:
[ 40.535829] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:274
[...]
[ 40.552134] tcp_ca_find_autoload.constprop.0+0xcb/0x200
[ 40.552689] tcp_set_congestion_control+0x99/0x7b0
[ 40.553203] do_tcp_setsockopt+0x3ed/0x2240
[...]
[ 40.556041] __bpf_setsockopt+0x124/0x640
Signed-off-by: Martin KaFai Lau <martin.lau@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220830231953.792412-1-martin.lau@linux.dev
|
|
This is the result of `sort tools/testing/selftests/net/.gitignore`, but
preserving the comment at the top.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Link: https://lore.kernel.org/r/20220829184748.1535580-1-axelrasmussen@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The bpf_tail_call_static function is currently not defined unless
using clang >= 8.
To support bpf_tail_call_static on GCC we can check if __clang__ is
not defined to enable bpf_tail_call_static.
We need to use GCC assembly syntax when the compiler does not define
__clang__ as LLVM inline assembly is not fully compatible with GCC.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220829210546.755377-1-james.hilliard1@gmail.com
|
|
Commit 1034b03e54ac ("selftests: xsk: Simplify cleanup of ifobjects")
removed close on netns fd, which is not correct, so let us restore it.
Fixes: 1034b03e54ac ("selftests: xsk: Simplify cleanup of ifobjects")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220830133905.9945-1-maciej.fijalkowski@intel.com
|
|
Hongtao Yu reported problem when displaying uregs in perf script
for system wide perf.data:
# perf script -F uregs | head -10
Samples for 'dummy:HG' event do not have UREGS attribute set. Cannot print 'uregs' field.
The problem is the extra dummy event added for system wide,
which does not have proper sample_type setup.
Skipping attr check completely for dummy event as suggested
by Namhyung, because it does not have any samples anyway.
Reported-by: Hongtao Yu <hoy@fb.com>
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220831124041.219925-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Previous behavior is to segfault if there is no CPU PMU table and a
metric is sought. To reproduce compile with NO_JEVENTS=1 then request a
metric, for example, "perf stat -M IPC true".
Committer testing:
Before:
$ make -k NO_JEVENTS=1 BUILD_BPF_SKEL=1 O=/tmp/build/perf-urgent -C tools/perf install-bin
$ perf stat -M IPC true
Segmentation fault (core dumped)
$
After:
$ perf stat -M IPC true
Usage: perf stat [<options>] [<command>]
-M, --metrics <metric/metric group list>
monitor specified metrics or metric groups (separated by ,)
$
Fixes: 00facc760903be66 ("perf jevents: Switch build to use jevents.py")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ian Rogers <rogers.email@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kshipra Bopardikar <kshipra.bopardikar@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220830164846.401143-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
After running the nolibc tests, the "git status" is not clean because
the generated files are not ignored. Create a `.gitignore` inside the
selftests/nolibc directory to ignore them.
Cc: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Cc: Fernanda Ma'rouf <fernandafmr2@gmail.com>
Signed-off-by: Fernanda Ma'rouf <fernandafmr12@gnuweeb.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
It presents the supported targets, and becomes the default target to
save the user from having to read the makefile. The "all" target was
placed after it and now points to "run" to do everything since it's
no longer the default one.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
It's not convenient to rely on a sysroot built in another directory,
especially when running cross-compilation tests, where one has to
switch back and forth between directories.
Let's make it possible to install the sysroot directly in the test
directory. It's not big and even benefits from being copied by arch
so that it's easier to switch between archs if needed. The new
"sysroot" target does this, it just calls "headers_standalone" from
nolibc to install the sysroot right here.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The "run" target will build the kernel and start it in QEMU. The
"rerun" target will not have the kernel dependency and will just try
to start QEMU. The QEMU architecture used to start the kernel is
derived from the configured ARCH. This might need to be improved
for archs which include different variants under the same name
(mips vs mipsel, +/-64, riscv32 vs riscv64). This could be tested
for i386, x86, arm, arm64, mips and riscv (the later two reporting
issues on some tests).
It is possible to pass a test specification for nolibc-test in the TEST
variable, which will be passed as-is as NOLIBC_TEST.
On success, the number of successful tests is printed. On failure, failed
lines are individually printed.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
While most archs will work fine with "make defconfig", not all will
do, and it's not always easy to remember the most suitable choice to
use for a specific architecture.
This adds a "defconfig" target to the Makefile so that one may easily
run "make -C ... defconfig" and make sure to clean and rebuild a fresh
config. This is *not* used by default because we want to preserve the
user's config by default.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The "kernel" target rebuilds the kernel with the current config for the
selected arch, with an initramfs containing the nolibc-test utility.
Since image names depend on the architecture, the currently supported
ones are referenced and resolved based on the architecture.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Adding support for glibc can be useful to distinguish between bugs in
nolibc and bugs in the kernel when a syscall reports an unusual value.
It's not that much work and should not affect the long term
maintainability of the tests. The necessary changes can essentially be
summed up like this:
- set _GNU_SOURCE a the top to access some definitions
- many includes added when we know we don't come from nolibc (missing
the stdio include guard)
- disable gettid() which is not exposed by glibc
- disable gettimeofday's support of bad pointers since these crash
in glibc
- add a simple itoa() for errorname(); strerror() is too verbose (no
way to get short messages). strerrorname_np() was added in modern
glibc (2.32) to do exactly this but that 's too recent to be usable
as the default fallback.
- use the standard ioperm() definition. May be we need to implement
ioperm() in nolibc if that's useful.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
If /proc is not available (program run inside a chroot or without
sufficient permissions), it's better to disable the associated tests.
Some will be preserved like the ones which check for a failure to
create some entries there since they're still supposed to fail.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Most of the time the program will be run alone in an initramfs. There
is no value in requiring the user to populate /dev and /proc for such
tests, we can do it ourselves, and it participates to the tests at the
same time.
What's done here is that when called as init (getpid()==1) we check
if /dev exists or create it, if /dev/console and /dev/null exists,
otherwise we try to mount a devtmpfs there, and if it fails we fall
back to mknod. The console is reopened if stdout was closed. Finally
/proc is created and mounted if /proc/self cannot be found. This is
sufficient for most tests.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
QEMU, when started with "-device isa-debug-exit -no-reboot" will exit
with status code 2N+1 when N is written to 0x501. This is particularly
convenient for automated tests but this is not portable. As such we
only enable this on x86_64 when pid==1. In addition, this requires an
ioperm() call but in order not to have to define arch-specific syscalls
we just perform the syscall by hand there.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The idea is to ease automated testing under qemu. If the test succeeds
while running as PID 1, indicating the system was booted with init=/test,
let's just power off so that qemu can exit with a successful code. In
other situations it will exit and provoke a panic, which may be caught
for example with CONFIG_PVPANIC.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The test series called "stdlib" covers some libc functions (string,
stdlib etc). By default they are automatically run after "syscall"
but may be requested in argument or in variable NOLIBC_TEST.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This adds 63 tests covering about 34 syscalls. Both successes and
failures are tested. Two tests fail when run as unprivileged user
(link_dir which returns EACCESS instead of EPERM, and chroot which
returns EPERM). One test (execve("/")) expects to fail on EACCESS,
but needs to have valid arguments otherwise the kernel will log a
message. And a few tests require /proc to be mounted.
The code is not pretty since all tests are one-liners, sometimes
resulting in long lines, especially when using compount statements to
preset a line, but it's convenient and doesn't obfuscate the code,
which is important to understand what failed.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
It now becomes possible to pass a string either in argv[1] or in the
NOLIBC_TEST environment variable (the former having precedence), to
specify which tests to run. The format is:
testname[:range]*[,testname...]
Where a range is either a single value or the min and max numbers of the
test IDs in a sequence, delimited by a dash. Multiple ranges are possible.
This should provide enough flexibility to focus on certain failing parts
just by playing with the boot command line in a boot loader or in qemu
depending on what is accessible.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This creates a "nolibc" selftest that intends to test various parts of
the nolibc component, both in terms of build and execution for a given
architecture.
The aim is for it to be as simple to run as a kernel build, by just
passing the compiler (for the build) and the ARCH (for kernel and
execution).
It brings a basic squeleton made of a single C file that will ease testing
and error reporting. The code will be arranged so that it remains easy to
add basic tests for syscalls or library calls that may rely on a condition
to be executed, and whose result is compared to a value or to an error
with a specific errno value.
Tests will just use a relative line number in switch/case statements as
an index, saving the user from having to maintain arrays and complicated
functions which can often just be one-liners.
MAINTAINERS was updated.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
__NR_mmap2 was used for i386 but it's also needed for other archs such
as RISCV32 or ARM. Let's decide to use it based on the __NR_mmap2
definition as it's not defined on other archs.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
We return -ENOSYS when there's no syscall6() operation, but we must cast
it to void* to avoid a warning.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The "ld a0, 0(sp)" instruction doesn't build on RISCV32 because that
would load a 64-bit value into a 32-bit register. But argc 32-bit,
not 64, so we ought to use "lw" here. Tested on both RISCV32 and
RISCV64.
Cc: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
As discussed, clarify LKMM not recognizing certain kinds of orderings.
In particular, highlight the fact that LKMM might deliberately make
weaker guarantees than compilers and architectures.
[ paulmck: Fix whitespace issue noted by checkpatch.pl. ]
Link: https://lore.kernel.org/all/YpoW1deb%2FQeeszO1@ethstick13.dse.in.tum.de/T/#u
Co-developed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Paul Heidekrüger <paul.heidekrueger@in.tum.de>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Charalampos Mainas <charalampos.mainas@gmail.com>
Cc: Pramod Bhatotia <pramod.bhatotia@in.tum.de>
Cc: Soham Chakraborty <s.s.chakraborty@tudelft.nl>
Cc: Martin Fink <martin.fink@in.tum.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
__nf_ct_try_assign_helper() remains in place but it now requires a
template to configure the helper.
A toggle to disable automatic helper assignment was added by:
a9006892643a ("netfilter: nf_ct_helper: allow to disable automatic helper assignment")
in 2012 to address the issues described in "Secure use of iptables and
connection tracking helpers". Automatic conntrack helper assignment was
disabled by:
3bb398d925ec ("netfilter: nf_ct_helper: disable automatic helper assignment")
back in 2016.
This patch removes the sysctl and modparam toggles, users now have to
rely on explicit conntrack helper configuration via ruleset.
Update tools/testing/selftests/netfilter/nft_conntrack_helper.sh to
check that auto-assignment does not happen anymore.
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
