summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2023-01-20bpf: Fix missing var_off check for ARG_PTR_TO_DYNPTRKumar Kartikeya Dwivedi
Currently, the dynptr function is not checking the variable offset part of PTR_TO_STACK that it needs to check. The fixed offset is considered when computing the stack pointer index, but if the variable offset was not a constant (such that it could not be accumulated in reg->off), we will end up a discrepency where runtime pointer does not point to the actual stack slot we mark as STACK_DYNPTR. It is impossible to precisely track dynptr state when variable offset is not constant, hence, just like bpf_timer, kptr, bpf_spin_lock, etc. simply reject the case where reg->var_off is not constant. Then, consider both reg->off and reg->var_off.value when computing the stack pointer index. A new helper dynptr_get_spi is introduced to hide over these details since the dynptr needs to be located in multiple places outside the process_dynptr_func checks, hence once we know it's a PTR_TO_STACK, we need to enforce these checks in all places. Note that it is disallowed for unprivileged users to have a non-constant var_off, so this problem should only be possible to trigger from programs having CAP_PERFMON. However, its effects can vary. Without the fix, it is possible to replace the contents of the dynptr arbitrarily by making verifier mark different stack slots than actual location and then doing writes to the actual stack address of dynptr at runtime. Fixes: 97e03f521050 ("bpf: Add verifier support for dynptrs") Acked-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20230121002241.2113993-3-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/ipa/ipa_interrupt.c drivers/net/ipa/ipa_interrupt.h 9ec9b2a30853 ("net: ipa: disable ipa interrupt during suspend") 8e461e1f092b ("net: ipa: introduce ipa_interrupt_enable()") d50ed3558719 ("net: ipa: enable IPA interrupt handlers separate from registration") https://lore.kernel.org/all/20230119114125.5182c7ab@canb.auug.org.au/ https://lore.kernel.org/all/79e46152-8043-a512-79d9-c3b905462774@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-20Merge tag 'linux-kselftest-fixes-6.2-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fix from Shuah Khan: "Fix an error seen during unconfigured LLVM builds" * tag 'linux-kselftest-fixes-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kselftest: Fix error message for unconfigured LLVM builds
2023-01-20Merge tag 'net-6.2-rc5-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from wireless, bluetooth, bpf and netfilter. Current release - regressions: - Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf", fix nsna_ping mode of team - wifi: mt76: fix bugs in Rx queue handling and DMA mapping - eth: mlx5: - add missing mutex_unlock in error reporter - protect global IPsec ASO with a lock Current release - new code bugs: - rxrpc: fix wrong error return in rxrpc_connect_call() Previous releases - regressions: - bluetooth: hci_sync: fix use of HCI_OP_LE_READ_BUFFER_SIZE_V2 - wifi: - mac80211: fix crashes on Rx due to incorrect initialization of rx->link and rx->link_sta - mac80211: fix bugs in iTXQ conversion - Tx stalls, incorrect aggregation handling, crashes - brcmfmac: fix regression for Broadcom PCIe wifi devices - rndis_wlan: prevent buffer overflow in rndis_query_oid - netfilter: conntrack: handle tcp challenge acks during connection reuse - sched: avoid grafting on htb_destroy_class_offload when destroying - virtio-net: correctly enable callback during start_xmit, fix stalls - tcp: avoid the lookup process failing to get sk in ehash table - ipa: disable ipa interrupt during suspend - eth: stmmac: enable all safety features by default Previous releases - always broken: - bpf: - fix pointer-leak due to insufficient speculative store bypass mitigation (Spectre v4) - skip task with pid=1 in send_signal_common() to avoid a splat - fix BPF program ID information in BPF_AUDIT_UNLOAD as well as PERF_BPF_EVENT_PROG_UNLOAD events - fix potential deadlock in htab_lock_bucket from same bucket index but different map_locked index - bluetooth: - fix a buffer overflow in mgmt_mesh_add() - hci_qca: fix driver shutdown on closed serdev - ISO: fix possible circular locking dependency - CIS: hci_event: fix invalid wait context - wifi: brcmfmac: fixes for survey dump handling - mptcp: explicitly specify sock family at subflow creation time - netfilter: nft_payload: incorrect arithmetics when fetching VLAN header bits - tcp: fix rate_app_limited to default to 1 - l2tp: close all race conditions in l2tp_tunnel_register() - eth: mlx5: fixes for QoS config and eswitch configuration - eth: enetc: avoid deadlock in enetc_tx_onestep_tstamp() - eth: stmmac: fix invalid call to mdiobus_get_phy() Misc: - ethtool: add netlink attr in rss get reply only if the value is not empty" * tag 'net-6.2-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits) Revert "Merge branch 'octeontx2-af-CPT'" tcp: fix rate_app_limited to default to 1 bnxt: Do not read past the end of test names net: stmmac: enable all safety features by default octeontx2-af: add mbox to return CPT_AF_FLT_INT info octeontx2-af: update cpt lf alloc mailbox octeontx2-af: restore rxc conf after teardown sequence octeontx2-af: optimize cpt pf identification octeontx2-af: modify FLR sequence for CPT octeontx2-af: add mbox for CPT LF reset octeontx2-af: recover CPT engine when it gets fault net: dsa: microchip: ksz9477: port map correction in ALU table entry register selftests/net: toeplitz: fix race on tpacket_v3 block close net/ulp: use consistent error code when blocking ULP octeontx2-pf: Fix the use of GFP_KERNEL in atomic context on rt tcp: avoid the lookup process failing to get sk in ehash table Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf" MAINTAINERS: add networking entries for Willem net: sched: gred: prevent races when adding offloads to stats l2tp: prevent lockdep issue in l2tp_tunnel_register() ...
2023-01-19selftests/bpf: Add serial_test_kprobe_multi_bench_attach_kernel/module testsJiri Olsa
Add bench test for module portion of the symbols as well. # ./test_progs -v -t kprobe_multi_bench_attach_module bpf_testmod.ko is already unloaded. Loading bpf_testmod.ko... Successfully loaded bpf_testmod.ko. test_kprobe_multi_bench_attach:PASS:get_syms 0 nsec test_kprobe_multi_bench_attach:PASS:kprobe_multi_empty__open_and_load 0 nsec test_kprobe_multi_bench_attach:PASS:bpf_program__attach_kprobe_multi_opts 0 nsec test_kprobe_multi_bench_attach: found 26620 functions test_kprobe_multi_bench_attach: attached in 0.182s test_kprobe_multi_bench_attach: detached in 0.082s #96 kprobe_multi_bench_attach_module:OK Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED Successfully unloaded bpf_testmod.ko. It's useful for testing kprobe multi link modules resolving. Acked-by: Song Liu <song@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20230116101009.23694-3-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-19selftests/bpf: Verify copy_register_state() preserves parent/live fieldsEduard Zingerman
A testcase to check that verifier.c:copy_register_state() preserves register parentage chain and livness information. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20230106142214.1040390-3-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-19selftests/net: toeplitz: fix race on tpacket_v3 block closeWillem de Bruijn
Avoid race between process wakeup and tpacket_v3 block timeout. The test waits for cfg_timeout_msec for packets to arrive. Packets arrive in tpacket_v3 rings, which pass packets ("frames") to the process in batches ("blocks"). The sk waits for req3.tp_retire_blk_tov msec to release a block. Set the block timeout lower than the process waiting time, else the process may find that no block has been released by the time it scans the socket list. Convert to a ring of more than one, smaller, blocks with shorter timeouts. Blocks must be page aligned, so >= 64KB. Fixes: 5ebfb4cc3048 ("selftests/net: toeplitz test") Signed-off-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20230118151847.4124260-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-19selftests/net: mv bpf/nat6to4.c to net folderHangbin Liu
There are some issues with the bpf/nat6to4.c building. 1. It use TEST_CUSTOM_PROGS, which will add the nat6to4.o to kselftest-list file and run by common run_tests. 2. When building the test via `make -C tools/testing/selftests/ TARGETS="net"`, the nat6to4.o will be build in selftests/net/bpf/ folder. But in test udpgro_frglist.sh it refers to ../bpf/nat6to4.o. The correct path should be ./bpf/nat6to4.o. 3. If building the test via `make -C tools/testing/selftests/ TARGETS="net" install`. The nat6to4.o will be installed to kselftest_install/net/ folder. Then the udpgro_frglist.sh should refer to ./nat6to4.o. To fix the confusing test path, let's just move the nat6to4.c to net folder and build it as TEST_GEN_FILES. Fixes: edae34a3ed92 ("selftests net: add UDP GRO fraglist + bpf self-tests") Tested-by: Björn Töpel <bjorn@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20230118020927.3971864-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-18selftests/bpf: Fix build errors if CONFIG_NF_CONNTRACK=mTiezhu Yang
If CONFIG_NF_CONNTRACK=m, there are no definitions of NF_NAT_MANIP_SRC and NF_NAT_MANIP_DST in vmlinux.h, build test_bpf_nf.c failed. $ make -C tools/testing/selftests/bpf/ CLNG-BPF [test_maps] test_bpf_nf.bpf.o progs/test_bpf_nf.c:160:42: error: use of undeclared identifier 'NF_NAT_MANIP_SRC' bpf_ct_set_nat_info(ct, &saddr, sport, NF_NAT_MANIP_SRC); ^ progs/test_bpf_nf.c:163:42: error: use of undeclared identifier 'NF_NAT_MANIP_DST' bpf_ct_set_nat_info(ct, &daddr, dport, NF_NAT_MANIP_DST); ^ 2 errors generated. Copy the definitions in include/net/netfilter/nf_nat.h to test_bpf_nf.c, in order to avoid redefinitions if CONFIG_NF_CONNTRACK=y, rename them with ___local suffix. This is similar with commit 1058b6a78db2 ("selftests/bpf: Do not fail build if CONFIG_NF_CONNTRACK=m/n"). Fixes: b06b45e82b59 ("selftests/bpf: add tests for bpf_ct_set_nat_info kfunc") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/r/1674028604-7113-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-01-18perf test build-id: Fix test check for PE fileAthira Rajeev
Perf test "build id cache operations" fails for PE executable. Logs below from powerpc system. Same is observed on x86 as well. <<>> Adding 5a0fd882b53084224ba47b624c55a469 ./tests/shell/../pe-file.exe: Ok build id: 5a0fd882b53084224ba47b624c55a469 link: /tmp/perf.debug.w0V/.build-id/5a/0fd882b53084224ba47b624c55a469 file: /tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf failed: file /tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf does not exist test child finished with -1 ---- end ---- build id cache operations: FAILED! <<>> The test tries to do: <<>> mkdir /tmp/perf.debug.TeY1 perf --buildid-dir /tmp/perf.debug.TeY1 buildid-cache -v -a ./tests/shell/../pe-file.exe <<>> The option "--buildid-dir" sets the build id cache directory as /tmp/perf.debug.TeY1. The option given to buildid-cahe, ie "-a ./tests/shell/../pe-file.exe", is to add the pe-file.exe to the cache. The testcase, sets buildid-dir and adds the file: pe-file.exe to build id cache. To check if the command is run successfully, "check" function looks for presence of the file in buildid cache directory. But the check here expects the added file to be executable. Snippet below: <<>> if [ ! -x $file ]; then echo "failed: file ${file} does not exist" exit 1 fi <<>> The buildid test is done for sha1 binary, md5 binary and also for PE file. The first two binaries are created at runtime by compiling with "--build-id" option and hence the check for sha1/md5 test should use [ ! -x ]. But in case of PE file, the permission for this input file is rw-r--r-- Hence the file added to build id cache has same permissoin Original file: ls tests/pe-file.exe | xargs stat --printf "%n %A \n" tests/pe-file.exe -rw-r--r-- buildid cache file: ls /tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf | xargs stat --printf "%n %A \n" /tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf -rw-r--r-- Fix the test to match with the permission of original file in case of FE file. ie if the "tests/pe-file.exe" file is not having exec permission, just check for existence of the buildid file using [ ! -e <file> ] Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Disha Goel <disgoel@linux.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230116050131.17221-2-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-18perf buildid-cache: Fix the file mode with copyfile() while adding file to ↵Athira Rajeev
build-id cache The test "build id cache operations" fails on powerpc as below: Adding 5a0fd882b53084224ba47b624c55a469 ./tests/shell/../pe-file.exe: Ok build id: 5a0fd882b53084224ba47b624c55a469 link: /tmp/perf.debug.ZTu/.build-id/5a/0fd882b53084224ba47b624c55a469 file: /tmp/perf.debug.ZTu/.build-id/5a/../../root/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf failed: file /tmp/perf.debug.ZTu/.build-id/5a/../../root/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf does not exist test child finished with -1 ---- end ---- build id cache operations: FAILED! The failing test is when trying to add pe-file.exe to build id cache. 'perf buildid-cache' can be used to add/remove/manage files from the build-id cache. "-a" option is used to add a file to the build-id cache. Simple command to do so for a PE exe file: # ls -ltr tests/pe-file.exe -rw-r--r--. 1 root root 75595 Jan 10 23:35 tests/pe-file.exe The file is in home directory. # mkdir /tmp/perf.debug.TeY1 # perf --buildid-dir /tmp/perf.debug.TeY1 buildid-cache -v -a tests/pe-file.exe The above will create ".build-id" folder in build id directory, which is /tmp/perf.debug.TeY1. Also adds file to this folder under build id. Example: # ls -ltr /tmp/perf.debug.TeY1/.build-id/5a/0fd882b53084224ba47b624c55a469/ total 76 -rw-r--r--. 1 root root 0 Jan 11 00:38 probes -rwxr-xr-x. 1 root root 75595 Jan 11 00:38 elf We can see in the results that file mode for original file and file in build id directory is different. ie, build id file has executable permission whereas original file doesn’t have. The code path and function (build_id_cache__add to add a file to the cache is in "util/build-id.c". In build_id_cache__add() function, it first attempts to link the original file to destination cache folder. If linking the file fails (which can happen if the destination and source is on a different mount points), it will copy the file to destination. Here copyfile() routine explicitly uses mode as "755" and hence file in the destination will have executable permission. Code snippet: if (link(realname, filename) && errno != EEXIST && copyfile(name, filename)) strace logs: 172285 link("/home/<user_name>/linux/tools/perf/tests/pe-file.exe", "/tmp/perf.debug.TeY1/home/<user_name>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf") = -1 EXDEV (Invalid cross-device link) 172285 newfstatat(AT_FDCWD, "tests/pe-file.exe", {st_mode=S_IFREG|0644, st_size=75595, ...}, 0) = 0 172285 openat(AT_FDCWD, "/tmp/perf.debug.TeY1/home/<user_name>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/.elf.KbAnsl", O_RDWR|O_CREAT|O_EXCL, 0600) = 3 172285 fchmod(3, 0755) = 0 172285 openat(AT_FDCWD, "tests/pe-file.exe", O_RDONLY) = 4 172285 mmap(NULL, 75595, PROT_READ, MAP_PRIVATE, 4, 0) = 0x7fffa5cd0000 172285 pwrite64(3, "MZ\220\0\3\0\0\0\4\0\0\0\377\377\0\0\270\0\0\0\0\0\0\0@\0\0\0\0\0\0\0"..., 75595, 0) = 75595 Whereas if the link succeeds, it succeeds in the first attempt itself and the file in the build-id dir will have same permission as original file. Example, above uses /tmp. Instead if we use "--buildid-dir /home/build", linking will work here since mount points are same. Hence the destination file will not have executable permission. Since the testcase "tests/shell/buildid.sh" always looks for executable file, test fails in powerpc environment when test is run from /root. The patch adds a change in build_id_cache__add() to use copyfile_mode() which also passes the file’s original mode as argument. This way the destination file mode also will be same as original file. Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Disha Goel <disgoel@linux.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20230116050131.17221-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-18perf expr: Prevent normalize() from reading into undefined memory in the ↵Sohom Datta
expression lexer The current implementation does not account for a trailing backslash followed by a null-byte. If a null-byte is encountered following a backslash, normalize() will continue reading (and potentially writing) into garbage memory ignoring the EOS null-byte. Signed-off-by: Sohom Datta <sohomdatta1+git@gmail.com> Acked-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20221204105836.1012885-1-sohomdatta1+git@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-18tools headers: Syncronize linux/build_bug.h with the kernel sourcesArnaldo Carvalho de Melo
To pick up the changes in: 07a368b3f55a79d3 ("bug: introduce ASSERT_STRUCT_OFFSET") This cset only introduces a build time assert macro, that may be useful at some point for tooling, for now it silences this perf build warning: Warning: Kernel ABI header at 'tools/include/linux/build_bug.h' differs from latest version at 'include/linux/build_bug.h' diff -u tools/include/linux/build_bug.h include/linux/build_bug.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Maxim Levitsky <mlevitsk@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: http://lore.kernel.org/lkml/Y8f0jqQFYDAOBkHx@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-18perf beauty: Update copy of linux/socket.h with the kernel sourcesArnaldo Carvalho de Melo
To pick the changes in: b5f0de6df6dce8d6 ("net: dev: Convert sa_data to flexible array in struct sockaddr") That don't result in any changes in the tables generated from that header. This silences this perf build warning: Warning: Kernel ABI header at 'tools/perf/trace/beauty/include/linux/socket.h' differs from latest version at 'include/linux/socket.h' diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-18tools headers arm64: Sync arm64's cputype.h with the kernel sourcesArnaldo Carvalho de Melo
To get the changes in: decb17aeb8fa2148 ("KVM: arm64: vgic: Add Apple M2 cpus to the list of broken SEIS implementations") 07e39e60bbf0ccd5 ("arm64: Add Cortex-715 CPU part definition") 8ec8490a1950efec ("arm64: Fix bit-shifting UB in the MIDR_CPU_MODEL() macro") That addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/arm64/include/asm/cputype.h' differs from latest version at 'arch/arm64/include/asm/cputype.h' diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h Cc: Ali Saidi <alisaidi@amazon.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: D Scott Phillips <scott@os.amperecomputing.com> Cc: German Gomez <german.gomez@arm.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Link: http://lore.kernel.org/lkml/Y8fvEGCGn+227qW0@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-18tools kvm headers arm64: Update KVM header from the kernel sourcesArnaldo Carvalho de Melo
To pick the changes from: 9cb1096f8590bc59 ("KVM: arm64: Enable ring-based dirty memory tracking") That doesn't result in any changes in tooling (built on a Libre Computer Firefly ROC-RK3399-PC-V1.1-A running Ubuntu 22.04), only addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h' diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Gavin Shan <gshan@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/Y8fmIT5PIfGaZuwa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-17bpf/selftests: Add verifier tests for loading sleepable programsJiri Olsa
Adding verifier tests for loading all types od allowed sleepable programs plus reject for tp_btf type. Acked-by: Song Liu <song@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20230117223705.440975-2-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-17tools headers UAPI: Sync x86's asm/kvm.h with the kernel sourcesArnaldo Carvalho de Melo
To pick the changes in: 8aff460f216753d8 ("KVM: x86: Add a VALID_MASK for the flags in kvm_msr_filter_range") c1340fe3590ebbe7 ("KVM: x86: Add a VALID_MASK for the flag in kvm_msr_filter") be83794210e7020f ("KVM: x86: Disallow the use of KVM_MSR_FILTER_DEFAULT_ALLOW in the kernel") That just rebuilds kvm-stat.c on x86, no change in functionality. This silences these perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h' diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h Cc: Aaron Lewis <aaronlewis@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: http://lore.kernel.org/lkml/Y8VR5wSAkd2A0HxS@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-17tools headers UAPI: Sync linux/kvm.h with the kernel sourcesArnaldo Carvalho de Melo
To pick the changes in: b0305c1e0e27ad91 ("KVM: x86/xen: Add KVM_XEN_INVALID_GPA and KVM_XEN_INVALID_GFN to uapi") That just rebuilds perf, as these patches don't add any new KVM ioctl to be harvested for the the 'perf trace' ioctl syscall argument beautifiers. This silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h' diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: http://lore.kernel.org/lkml/Y7Loj5slB908QSXf@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-16Merge tag 'mm-hotfixes-stable-2023-01-16-15-23' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc hotfixes from Andrew Morton: "21 hotfixes. Thirteen of these address pre-6.1 issues and hence have the cc:stable tag" * tag 'mm-hotfixes-stable-2023-01-16-15-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits) init/Kconfig: fix typo (usafe -> unsafe) nommu: fix split_vma() map_count error nommu: fix do_munmap() error path nommu: fix memory leak in do_mmap() error path MAINTAINERS: update Robert Foss' email address proc: fix PIE proc-empty-vm, proc-pid-vm tests mm: update mmap_sem comments to refer to mmap_lock include/linux/mm: fix release_pages_arg kernel doc comment lib/win_minmax: use /* notation for regular comments kasan: mark kasan_kunit_executing as static nilfs2: fix general protection fault in nilfs_btree_insert() Docs/admin-guide/mm/zswap: remove zsmalloc's lack of writeback warning mm/hugetlb: pre-allocate pgtable pages for uffd wr-protects hugetlb: unshare some PMDs when splitting VMAs mm: fix vma->anon_name memory leak for anonymous shmem VMAs mm/shmem: restore SHMEM_HUGE_DENY precedence over MADV_COLLAPSE mm/MADV_COLLAPSE: don't expand collapse when vm_end is past requested end mm/userfaultfd: enable writenotify while userfaultfd-wp is enabled for a VMA mm/khugepaged: fix collapse_pte_mapped_thp() to allow anon_vma mm/hugetlb: fix uffd-wp handling for migration entries in hugetlb_change_protection() ...
2023-01-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfDavid S. Miller
Pable Neira Ayuso says: ==================== The following patchset contains Netfilter fixes for net: 1) Increase timeout to 120 seconds for netfilter selftests to fix nftables transaction tests, from Florian Westphal. 2) Fix overflow in bitmap_ip_create() due to integer arithmetics in a 64-bit bitmask, from Gavrilov Ilia. 3) Fix incorrect arithmetics in nft_payload with double-tagged vlan matching. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-15selftests/bpf: add ipip6 and ip6ip decap to test_tc_tunnelZiyang Xuan
Add ipip6 and ip6ip decap testcases. Verify that bpf_skb_adjust_room() correctly decapsulate ipip6 and ip6ip tunnel packets. Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/dfd2d8cfdf9111bd129170d4345296f53bee6a67.1673574419.git.william.xuanziyang@huawei.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-01-15bpf: Add ipip6 and ip6ip decap support for bpf_skb_adjust_room()Ziyang Xuan
Add ipip6 and ip6ip decap support for bpf_skb_adjust_room(). Main use case is for using cls_bpf on ingress hook to decapsulate IPv4 over IPv6 and IPv6 over IPv4 tunnel packets. Add two new flags BPF_F_ADJ_ROOM_DECAP_L3_IPV{4,6} to indicate the new IP header version after decapsulating the outer IP header. Suggested-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/b268ec7f0ff9431f4f43b1b40ab856ebb28cb4e1.1673574419.git.william.xuanziyang@huawei.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-01-14Merge tag 'fixes-2023-01-14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull memblock fix from Mike Rapoport: "memblock: always release pages to the buddy allocator in memblock_free_late() If CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, memblock_free_pages() only releases pages to the buddy allocator if they are not in the deferred range. This is correct for free pages (as defined by for_each_free_mem_pfn_range_in_zone()) because free pages in the deferred range will be initialized and released as part of the deferred init process. memblock_free_pages() is called by memblock_free_late(), which is used to free reserved ranges after memblock_free_all() has run. All pages in reserved ranges have been initialized at that point, and accordingly, those pages are not touched by the deferred init process. This means that currently, if the pages that memblock_free_late() intends to release are in the deferred range, they will never be released to the buddy allocator. They will forever be reserved. In addition, memblock_free_pages() calls kmsan_memblock_free_pages(), which is also correct for free pages but is not correct for reserved pages. KMSAN metadata for reserved pages is initialized by kmsan_init_shadow(), which runs shortly before memblock_free_all(). For both of these reasons, memblock_free_pages() should only be called for free pages, and memblock_free_late() should call __free_pages_core() directly instead. One case where this issue can occur in the wild is EFI boot on x86_64. The x86 EFI code reserves all EFI boot services memory ranges via memblock_reserve() and frees them later via memblock_free_late() (efi_reserve_boot_services() and efi_free_boot_services(), respectively). If any of those ranges happens to fall within the deferred init range, the pages will not be released and that memory will be unavailable. For example, on an Amazon EC2 t3.micro VM (1 GB) booting via EFI: v6.2-rc2: Node 0, zone DMA spanned 4095 present 3999 managed 3840 Node 0, zone DMA32 spanned 246652 present 245868 managed 178867 v6.2-rc2 + patch: Node 0, zone DMA spanned 4095 present 3999 managed 3840 Node 0, zone DMA32 spanned 246652 present 245868 managed 222816 # +43,949 pages" * tag 'fixes-2023-01-14' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: mm: Always release pages to the buddy allocator in memblock_free_late().
2023-01-13selftests: mptcp: userspace: validate v4-v6 subflows mixMatthieu Baerts
MPTCP protocol supports having subflows in both IPv4 and IPv6. In Linux, it is possible to have that if the MPTCP socket has been created with AF_INET6 family without the IPV6_V6ONLY option. Here, a new IPv4 subflow is being added to the initial IPv6 connection, then being removed using Netlink commands. Cc: stable@vger.kernel.org # v5.19+ Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13selftests/bpf: Fix missing space errorRoberto Valenzuela
Add the missing space after 'dest' variable assignment. This change will resolve the following checkpatch.pl script error: ERROR: spaces required around that '+=' (ctx:VxW) Signed-off-by: Roberto Valenzuela <valenzuelarober@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20230113180257.39769-1-valenzuelarober@gmail.com
2023-01-13libbpf: Replace '.' with '_' in legacy kprobe event nameMenglong Dong
'.' is not allowed in the event name of kprobe. Therefore, we will get a EINVAL if the kernel function name has a '.' in legacy kprobe attach case, such as 'icmp_reply.constprop.0'. In order to adapt this case, we need to replace the '.' with other char in gen_kprobe_legacy_event_name(). And I use '_' for this propose. Signed-off-by: Menglong Dong <imagedong@tencent.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Alan Maguire <alan.maguire@oracle.com> Link: https://lore.kernel.org/bpf/20230113093427.1666466-1-imagedong@tencent.com
2023-01-13bpftool: Always disable stack protection for BPF objectsHolger Hoffstätte
When the clang toolchain has stack protection enabled in order to be consistent with gcc - which just happens to be the case on Gentoo - the bpftool build fails: [...] clang \ -I. \ -I/tmp/portage/dev-util/bpftool-6.0.12/work/linux-6.0/tools/include/uapi/ \ -I/tmp/portage/dev-util/bpftool-6.0.12/work/linux-6.0/tools/bpf/bpftool/bootstrap/libbpf/include \ -g -O2 -Wall -target bpf -c skeleton/pid_iter.bpf.c -o pid_iter.bpf.o clang \ -I. \ -I/tmp/portage/dev-util/bpftool-6.0.12/work/linux-6.0/tools/include/uapi/ \ -I/tmp/portage/dev-util/bpftool-6.0.12/work/linux-6.0/tools/bpf/bpftool/bootstrap/libbpf/include \ -g -O2 -Wall -target bpf -c skeleton/profiler.bpf.c -o profiler.bpf.o skeleton/profiler.bpf.c:40:14: error: A call to built-in function '__stack_chk_fail' is not supported. int BPF_PROG(fentry_XXX) ^ skeleton/profiler.bpf.c:94:14: error: A call to built-in function '__stack_chk_fail' is not supported. int BPF_PROG(fexit_XXX) ^ 2 errors generated. [...] Since stack-protector makes no sense for the BPF bits just unconditionally disable it. Bug: https://bugs.gentoo.org/890638 Signed-off-by: Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/74cd9d2e-6052-312a-241e-2b514a75c92c@applied-asynchrony.com
2023-01-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/usb/r8152.c be53771c87f4 ("r8152: add vendor/device ID pair for Microsoft Devkit") ec51fbd1b8a2 ("r8152: add USB device driver for config selection") https://lore.kernel.org/all/20230113113339.658c4723@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-12Merge tag 'net-6.2-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from rxrpc. The rxrpc changes are noticeable large: to address a recent regression has been necessary completing the threaded refactor. Current release - regressions: - rxrpc: - only disconnect calls in the I/O thread - move client call connection to the I/O thread - fix incoming call setup race - eth: mlx5: - restore pkt rate policing support - fix memory leak on updating vport counters Previous releases - regressions: - gro: take care of DODGY packets - ipv6: deduct extension header length in rawv6_push_pending_frames - tipc: fix unexpected link reset due to discovery messages Previous releases - always broken: - sched: disallow noqueue for qdisc classes - eth: ice: fix potential memory leak in ice_gnss_tty_write() - eth: ixgbe: fix pci device refcount leak - eth: mlx5: - fix command stats access after free - fix macsec possible null dereference when updating MAC security entity (SecY)" * tag 'net-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits) r8152: add vendor/device ID pair for Microsoft Devkit net: stmmac: add aux timestamps fifo clearance wait bnxt: make sure we return pages to the pool net: hns3: fix wrong use of rss size during VF rss config ipv6: raw: Deduct extension header length in rawv6_push_pending_frames net: lan966x: check for ptp to be enabled in lan966x_ptp_deinit() net: sched: disallow noqueue for qdisc classes iavf/iavf_main: actually log ->src mask when talking about it igc: Fix PPS delta between two synchronized end-points ixgbe: fix pci device refcount leak octeontx2-pf: Fix resource leakage in VF driver unbind selftests/net: l2_tos_ttl_inherit.sh: Ensure environment cleanup on failure. selftests/net: l2_tos_ttl_inherit.sh: Run tests in their own netns. selftests/net: l2_tos_ttl_inherit.sh: Set IPv6 addresses with "nodad". net/mlx5e: Fix macsec possible null dereference when updating MAC security entity (SecY) net/mlx5e: Fix macsec ssci attribute handling in offload path net/mlx5: E-switch, Coverity: overlapping copy net/mlx5e: Don't support encap rules with gbp option net/mlx5: Fix ptp max frequency adjustment range net/mlx5e: Fix memory leak on updating vport counters ...
2023-01-12Merge tag 'core-urgent-2023-01-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fix from Ingo Molnar: - Fix objtool to be more permissive with hand-written assembly that uses non-function symbols in executable sections. * tag 'core-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Tolerate STT_NOTYPE symbols at end of section
2023-01-12Merge tag 'urgent-nolibc.2023.01.09a' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull nolibc fixes from Paul McKenney: - The fd_set structure was incorrectly defined as arrays of u32 instead of long, which breaks BE64. Fix courtesy of Sven Schnelle. - S_ISxxx macros were incorrectly testing the bits after applying them instead of bitwise ANDing S_FMT with the value. Fix from Warner Losh. - The mips code was randomly broken due to an unprotected "noreorder" directive in the _start code that could prevent the assembler from filling delayed slots. This in turn resulted in random other instructions being placed into those slots. Fix courtesy of Willy Tarreau. - The current nolibc header layout refrains from including files that are not explicitly included by the code using nolibc. Unfortunately, this causes build failures when such files contain definitions that are used (for example) by libgcc. Example definitions include raise() and memset(), which are called by some architectures, but only at certain optimization levels. Fix courtesy of Willy Tarreau. - gcc 11.3 in ARM thumb2 mode at -O2 recognized a memset() construction inside the memset() definition. The compiler replaced this construction with a call to... memset(). Userland cannot be forced to build with -ffreestanding, so an empty asm() statement was introduced into the loop the loop in order to prevent the compiler from making this unproductive transformation. Fix courtesy of Willy Tarreau. - Most of the O_* macros were wrong on RISCV because their octal values were coded as hexadecimal. This resulted in the getdents64() selftest failing. Fix courtesy of Willy Tarreau. This was tested on x86_64, i386, armv5, armv7, thumb1, thumb2, mips and riscv, all at -O0, -Os and -O3. * tag 'urgent-nolibc.2023.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: tools/nolibc: fix the O_* fcntl/open macro definitions for riscv tools/nolibc: prevent gcc from making memset() loop over itself tools/nolibc: fix missing includes causing build issues at -O0 tools/nolibc: restore mips branch ordering in the _start block tools/nolibc: Fix S_ISxxx macros nolibc: fix fd_set type
2023-01-12kselftest: Fix error message for unconfigured LLVM buildsMark Brown
We are missing a ) when we attempt to complain about not having enough configuration for clang, resulting in the rather inscrutable error: ../lib.mk:23: *** unterminated call to function 'error': missing ')'. Stop. Add the required ) so we print the message we were trying to print. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-01-12test/vsock: vsock_perf utilityArseniy Krasnov
This adds utility to check vsock rx/tx performance. Usage as sender: ./vsock_perf --sender <cid> --port <port> --bytes <bytes to send> Usage as receiver: ./vsock_perf --port <port> --rcvlowat <SO_RCVLOWAT> Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-12test/vsock: add big message testArseniy Krasnov
This adds test for sending message, bigger than peer's buffer size. For SOCK_SEQPACKET socket it must fail, as this type of socket has message size limit. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-12test/vsock: rework message bounds testArseniy Krasnov
This updates message bound test making it more complex. Instead of sending 1 bytes messages with one MSG_EOR bit, it sends messages of random length(one half of messages are smaller than page size, second half are bigger) with random number of MSG_EOR bits set. Receiver also don't know total number of messages. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-11selftests/xsk: automatically switch XDP programsMagnus Karlsson
Implement automatic switching of XDP programs and execution modes if needed by a test. This makes it much simpler to write a test as it only has to say what XDP program it needs if it is not the default one. This also makes it possible to remove the initial explicit attachment of the XDP program as well as the explicit mode switch in the code. These are now handled by the same code that just checks if a switch is necessary, so no special cases are needed. The default XDP program for all tests is one that sends all packets to the AF_XDP socket. If you need another one, please use the new function test_spec_set_xdp_prog() to specify what XDP programs and maps to use for this test. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20230111093526.11682-16-magnus.karlsson@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-11selftests/xsk: automatically restore packet streamMagnus Karlsson
Automatically restore the default packet stream if needed at the end of each test. This so that test writers do not forget to do this. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20230111093526.11682-15-magnus.karlsson@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-11selftests/xsk: merge dual and single thread dispatchersMagnus Karlsson
Make the thread dispatching code common by unifying the dual and single thread dispatcher code. This so we do not have to add code in two places in upcoming commits. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20230111093526.11682-14-magnus.karlsson@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-11selftests/xsk: add test when some packets are XDP_DROPedMagnus Karlsson
Add a new test where some of the packets are not passed to the AF_XDP socket and instead get a XDP_DROP verdict. This is important as it tests the recycling mechanism of the buffer pool. If a packet is not sent to the AF_XDP socket, the buffer the packet resides in is instead recycled so it can be used again without the round-trip to user space. The test introduces a new XDP program that drops every other packet. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20230111093526.11682-13-magnus.karlsson@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-11selftests/xsk: get rid of built-in XDP programMagnus Karlsson
Get rid of the built-in XDP program that was part of the old libbpf code in xsk.c and replace it with an eBPF program build using the framework by all the other bpf selftests. This will form the base for adding more programs in later commits. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20230111093526.11682-12-magnus.karlsson@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-11selftests/xsk: remove unnecessary code in control pathMagnus Karlsson
Remove unnecessary code in the control path. This is located in the file xsk.c that was moved from libbpf when the xsk support there was deprecated. Some of the code there is not needed anymore as the selftests are only guaranteed to run on the kernel it is shipped with. Therefore, all the code that has to deal with compatibility of older kernels can be dropped and also any other function that is not of any use for the tests. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20230111093526.11682-11-magnus.karlsson@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-11selftests/xsk: load and attach XDP program only once per modeMagnus Karlsson
Load and attach the XDP program only once per XDP mode that is being executed. Today, the XDP program is loaded and attached for every test, then unloaded, which takes a long time on real NICs, since they have to reconfigure their HW, in contrast to veth. The test suite now completes in 21 seconds, instead of 207 seconds previously on my machine. This is a speed-up of around 10x. This is accomplished by moving the XDP loading from the worker threads to the main thread and replacing the XDP loading interfaces of xsk.c that was taken from the xsk support in libbpf, with something more explicit that is more useful for these tests. Instead, the relevant file descriptors and ifindexes are just passed down to the new functions. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20230111093526.11682-10-magnus.karlsson@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-11selftests/xsk: remove namespacesMagnus Karlsson
Remove the namespaces used as they fill no function. This will simplify the code for speeding up the tests in the following commits. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20230111093526.11682-9-magnus.karlsson@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-11selftests/xsk: replace asm acquire/release implementationsMagnus Karlsson
Replace our own homegrown assembly store/release and load/acquire implementations with the HW agnositic atomic APIs C11 offers. This to make the code more portable, easier to read, and reduce the maintenance burden. The original code used load-acquire and store-release barriers hand-coded in assembly. Since C11, these kind of operations are offered as built-ins in gcc and llvm. The load-acquire operation prevents hoisting of non-atomic memory operations to before this operation and it corresponds to the __ATOMIC_ACQUIRE operation in the built-in atomics. The store-release operation prevents hoisting of non-atomic memory operations to after this operation and it corresponds to the __ATOMIC_RELEASE operation in the built-in atomics. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20230111093526.11682-8-magnus.karlsson@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-11selftests/xsk: add debug option for creating netdevsMagnus Karlsson
Add a new option to the test_xsk.sh script that only creates the two veth netdevs and the extra namespace, then exits without running any tests. The failed test can then be executed in the debugger without having to create the netdevs and namespace manually. For ease-of-use, the veth netdevs to use are printed so they can be copied into the debugger. Here is an example how to use it: > sudo ./test_xsk.sh -d veth10 veth11 > gdb xskxceiver In gdb: run -i veth10 -i veth11 And now the test cases can be debugged with gdb. If you want to debug the test suite on a real NIC in loopback mode, there is no need to use this feature as you already know the netdev of your NIC. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20230111093526.11682-7-magnus.karlsson@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-11selftests/xsk: remove unused variable outstanding_txMagnus Karlsson
Remove the unused variable outstanding_tx. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20230111093526.11682-6-magnus.karlsson@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-11selftests/xsk: print correct error codes when exitingMagnus Karlsson
Print the correct error codes when exiting the test suite due to some terminal error. Some of these had a switched sign and some of them printed zero instead of errno. Fixes: facb7cb2e909 ("selftests/bpf: Xsk selftests - SKB POLL, NOPOLL") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20230111093526.11682-5-magnus.karlsson@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-11selftests/xsk: submit correct number of frames in populate_fill_ringMagnus Karlsson
Submit the correct number of frames in the function xsk_populate_fill_ring(). For the tests that set the flag use_addr_for_fill, uninitialized buffers were sent to the fill ring following the correct ones. This has no impact on the tests, since they only use the ones that were initialized. But for correctness, this should be fixed. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20230111093526.11682-4-magnus.karlsson@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-11selftests/xsk: do not close unused file descriptorsMagnus Karlsson
Do not close descriptors that have never been used. File descriptor fields that are not in use are erroneously marked with the number 0, which is a valid fd. Mark unused fds with -1 instead and do not close these when deleting the socket. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20230111093526.11682-3-magnus.karlsson@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 21:26:29 +0000