| Age | Commit message (Collapse) | Author |
|---|
|
The generic parts of the RPC layer need to know the widths (in
XDR_UNIT increments) of the XDR data types defined for each
protocol.
As a first step, add dictionaries to keep track of the symbolic and
actual maximum XDR width of XDR types.
This makes it straightforward to look up the width of a type by its
name. The built-in dictionaries are pre-loaded with the widths of
the built-in XDR types as defined in RFC 4506.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
In order to compute the numeric on-the-wire width of XDR types,
xdrgen needs to keep track of the numeric value of constants that
are defined in the input specification so it can perform
calculations with those values.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: Add a __post_init__ function to the data classes that
need to update the "structs" and "pass_by_reference" sets.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This simplifies the generated C code and makes way for supporting
big-endian XDR enums.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
"close.j2" is a confusing name.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
I misread RFC 4506. The built-in data type is called simply
"string", as there is no fixed-length variety.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: Make both arms of the type_specifier AST transformer
match. No behavior change is expected.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
To use xdrgen in Makefiles, it needs to exit with a zero status if
the compilation worked. Otherwise the make command fails with an
error.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
* kvm-arm64/mpam-ni:
: Hiding FEAT_MPAM from KVM guests, courtesy of James Morse + Joey Gouly
:
: Fix a longstanding bug where FEAT_MPAM was accidentally exposed to KVM
: guests + the EL2 trap configuration was not explicitly configured. As
: part of this, bring in skeletal support for initialising the MPAM CPU
: context so KVM can actually set traps for its guests.
:
: Be warned -- if this series leads to boot failures on your system,
: you're running on turd firmware.
:
: As an added bonus (that builds upon the infrastructure added by the MPAM
: series), allow userspace to configure CTR_EL0.L1Ip, courtesy of Shameer
: Kolothum.
KVM: arm64: Make L1Ip feature in CTR_EL0 writable from userspace
KVM: arm64: selftests: Test ID_AA64PFR0.MPAM isn't completely ignored
KVM: arm64: Disable MPAM visibility by default and ignore VMM writes
KVM: arm64: Add a macro for creating filtered sys_reg_descs entries
KVM: arm64: Fix missing traps of guest accesses to the MPAM registers
arm64: cpufeature: discover CPU support for MPAM
arm64: head.S: Initialise MPAM EL2 registers and disable traps
arm64/sysreg: Convert existing MPAM sysregs and add the remaining entries
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/psci-1.3:
: PSCI v1.3 support, courtesy of David Woodhouse
:
: Bump KVM's PSCI implementation up to v1.3, with the added bonus of
: implementing the SYSTEM_OFF2 call. Like other system-scoped PSCI calls,
: this gets relayed to userspace for further processing with a new
: KVM_SYSTEM_EVENT_SHUTDOWN flag.
:
: As an added bonus, implement client-side support for hibernation with
: the SYSTEM_OFF2 call.
arm64: Use SYSTEM_OFF2 PSCI call to power off for hibernate
KVM: arm64: nvhe: Pass through PSCI v1.3 SYSTEM_OFF2 call
KVM: selftests: Add test for PSCI SYSTEM_OFF2
KVM: arm64: Add support for PSCI v1.2 and v1.3
KVM: arm64: Add PSCI v1.3 SYSTEM_OFF2 function for hibernation
firmware/psci: Add definitions for PSCI v1.3 specification
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
With the first disassemble method in perf, the parsing of objdump
output, just like we have for llvm and capstone.
This paves the way to allow the user to specify what disassemblers are
preferred and to also to at some point allow building without the
objdump method.
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Link: https://lore.kernel.org/r/20241111151734.1018476-2-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Pull virtio fixes from Michael Tsirkin:
"Several small bugfixes all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa/mlx5: Fix error path during device add
vp_vdpa: fix id_table array not null terminated error
virtio_pci: Fix admin vq cleanup by using correct info pointer
vDPA/ifcvf: Fix pci_read_config_byte() return code handling
Fix typo in vringh_test.c
vdpa: solidrun: Fix UB bug with devres
vsock/virtio: Initialization of the dangling pointer occurring in vsk->trans
|
|
scx_bpf_dsq_move[_vtime]*()
In sched_ext API, a repeatedly reported pain point is the overuse of the
verb "dispatch" and confusion around "consume":
- ops.dispatch()
- scx_bpf_dispatch[_vtime]()
- scx_bpf_consume()
- scx_bpf_dispatch[_vtime]_from_dsq*()
This overloading of the term is historical. Originally, there were only
built-in DSQs and moving a task into a DSQ always dispatched it for
execution. Using the verb "dispatch" for the kfuncs to move tasks into these
DSQs made sense.
Later, user DSQs were added and scx_bpf_dispatch[_vtime]() updated to be
able to insert tasks into any DSQ. The only allowed DSQ to DSQ transfer was
from a non-local DSQ to a local DSQ and this operation was named "consume".
This was already confusing as a task could be dispatched to a user DSQ from
ops.enqueue() and then the DSQ would have to be consumed in ops.dispatch().
Later addition of scx_bpf_dispatch_from_dsq*() made the confusion even worse
as "dispatch" in this context meant moving a task to an arbitrary DSQ from a
user DSQ.
Clean up the API with the following renames:
1. scx_bpf_dispatch[_vtime]() -> scx_bpf_dsq_insert[_vtime]()
2. scx_bpf_consume() -> scx_bpf_dsq_move_to_local()
3. scx_bpf_dispatch[_vtime]_from_dsq*() -> scx_bpf_dsq_move[_vtime]*()
This patch performs the third set of renames. Compatibility is maintained
by:
- The previous kfunc names are still provided by the kernel so that old
binaries can run. Kernel generates a warning when the old names are used.
- compat.bpf.h provides wrappers for the new names which automatically fall
back to the old names when running on older kernels. They also trigger
build error if old names are used for new builds.
- scx_bpf_dispatch[_vtime]_from_dsq*() were already wrapped in __COMPAT
macros as they were introduced during v6.12 cycle. Wrap new API in
__COMPAT macros too and trigger build errors on both __COMPAT prefixed and
naked usages of the old names.
The compat features will be dropped after v6.15.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
Acked-by: Johannes Bechberger <me@mostlynerdless.de>
Acked-by: Giovanni Gherdovich <ggherdovich@suse.com>
Cc: Dan Schatzberg <dschatzberg@meta.com>
Cc: Ming Yang <yougmark94@gmail.com>
|
|
In sched_ext API, a repeatedly reported pain point is the overuse of the
verb "dispatch" and confusion around "consume":
- ops.dispatch()
- scx_bpf_dispatch[_vtime]()
- scx_bpf_consume()
- scx_bpf_dispatch[_vtime]_from_dsq*()
This overloading of the term is historical. Originally, there were only
built-in DSQs and moving a task into a DSQ always dispatched it for
execution. Using the verb "dispatch" for the kfuncs to move tasks into these
DSQs made sense.
Later, user DSQs were added and scx_bpf_dispatch[_vtime]() updated to be
able to insert tasks into any DSQ. The only allowed DSQ to DSQ transfer was
from a non-local DSQ to a local DSQ and this operation was named "consume".
This was already confusing as a task could be dispatched to a user DSQ from
ops.enqueue() and then the DSQ would have to be consumed in ops.dispatch().
Later addition of scx_bpf_dispatch_from_dsq*() made the confusion even worse
as "dispatch" in this context meant moving a task to an arbitrary DSQ from a
user DSQ.
Clean up the API with the following renames:
1. scx_bpf_dispatch[_vtime]() -> scx_bpf_dsq_insert[_vtime]()
2. scx_bpf_consume() -> scx_bpf_dsq_move_to_local()
3. scx_bpf_dispatch[_vtime]_from_dsq*() -> scx_bpf_dsq_move[_vtime]*()
This patch performs the second rename. Compatibility is maintained by:
- The previous kfunc names are still provided by the kernel so that old
binaries can run. Kernel generates a warning when the old names are used.
- compat.bpf.h provides wrappers for the new names which automatically fall
back to the old names when running on older kernels. They also trigger
build error if old names are used for new builds.
The compat features will be dropped after v6.15.
v2: Comment and documentation updates.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
Acked-by: Johannes Bechberger <me@mostlynerdless.de>
Acked-by: Giovanni Gherdovich <ggherdovich@suse.com>
Cc: Dan Schatzberg <dschatzberg@meta.com>
Cc: Ming Yang <yougmark94@gmail.com>
|
|
In sched_ext API, a repeatedly reported pain point is the overuse of the
verb "dispatch" and confusion around "consume":
- ops.dispatch()
- scx_bpf_dispatch[_vtime]()
- scx_bpf_consume()
- scx_bpf_dispatch[_vtime]_from_dsq*()
This overloading of the term is historical. Originally, there were only
built-in DSQs and moving a task into a DSQ always dispatched it for
execution. Using the verb "dispatch" for the kfuncs to move tasks into these
DSQs made sense.
Later, user DSQs were added and scx_bpf_dispatch[_vtime]() updated to be
able to insert tasks into any DSQ. The only allowed DSQ to DSQ transfer was
from a non-local DSQ to a local DSQ and this operation was named "consume".
This was already confusing as a task could be dispatched to a user DSQ from
ops.enqueue() and then the DSQ would have to be consumed in ops.dispatch().
Later addition of scx_bpf_dispatch_from_dsq*() made the confusion even worse
as "dispatch" in this context meant moving a task to an arbitrary DSQ from a
user DSQ.
Clean up the API with the following renames:
1. scx_bpf_dispatch[_vtime]() -> scx_bpf_dsq_insert[_vtime]()
2. scx_bpf_consume() -> scx_bpf_dsq_move_to_local()
3. scx_bpf_dispatch[_vtime]_from_dsq*() -> scx_bpf_dsq_move[_vtime]*()
This patch performs the first set of renames. Compatibility is maintained
by:
- The previous kfunc names are still provided by the kernel so that old
binaries can run. Kernel generates a warning when the old names are used.
- compat.bpf.h provides wrappers for the new names which automatically fall
back to the old names when running on older kernels. They also trigger
build error if old names are used for new builds.
The compat features will be dropped after v6.15.
v2: Documentation updates.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
Acked-by: Johannes Bechberger <me@mostlynerdless.de>
Acked-by: Giovanni Gherdovich <ggherdovich@suse.com>
Cc: Dan Schatzberg <dschatzberg@meta.com>
Cc: Ming Yang <yougmark94@gmail.com>
|
|
Logic to prevent callbacks from acquiring new references for the program
(i.e. leaving acquired references), and releasing caller references
(i.e. those acquired in parent frames) was introduced in commit
9d9d00ac29d0 ("bpf: Fix reference state management for synchronous callbacks").
This was necessary because back then, the verifier simulated each
callback once (that could potentially be executed N times, where N can
be zero). This meant that callbacks that left lingering resources or
cleared caller resources could do it more than once, operating on
undefined state or leaking memory.
With the fixes to callback verification in commit
ab5cfac139ab ("bpf: verify callbacks as if they are called unknown number of times"),
all of this extra logic is no longer necessary. Hence, drop it as part
of this commit.
Cc: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241109231430.2475236-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
The timer_lockup test needs 2 CPUs to work, on single-CPU nodes it fails
to set thread affinity to CPU 1 since it doesn't exist:
# ./test_progs -t timer_lockup
test_timer_lockup:PASS:timer_lockup__open_and_load 0 nsec
test_timer_lockup:PASS:pthread_create thread1 0 nsec
test_timer_lockup:PASS:pthread_create thread2 0 nsec
timer_lockup_thread:PASS:cpu affinity 0 nsec
timer_lockup_thread:FAIL:cpu affinity unexpected error: 22 (errno 0)
test_timer_lockup:PASS: 0 nsec
#406 timer_lockup:FAIL
Skip the test if only 1 CPU is available.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Fixes: 50bd5a0c658d1 ("selftests/bpf: Add timer lockup selftest")
Tested-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241107115231.75200-1-vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
Add test cases to verify the following four update operations on htab of
maps don't trigger lockdep warning:
(1) add then delete
(2) add, overwrite, then delete
(3) add, then lookup_and_delete
(4) add two elements, then lookup_and_delete_batch
Test cases are added for pre-allocated and non-preallocated htab of maps
respectively.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241106063542.357743-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
Moving the definition of ENOTSUPP into bpf_util.h to remove the
duplicated definitions in multiple files.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241106063542.357743-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
With recent uprobe fix [1] the sync time after unregistering uprobe is
much longer and prolongs the consumer test which creates and destroys
hundreds of uprobes.
This change adds 16 threads (which fits the test logic) and speeds up
the test.
Before the change:
# perf stat --null ./test_progs -t uprobe_multi_test/consumers
#421/9 uprobe_multi_test/consumers:OK
#421 uprobe_multi_test:OK
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
Performance counter stats for './test_progs -t uprobe_multi_test/consumers':
28.818778973 seconds time elapsed
0.745518000 seconds user
0.919186000 seconds sys
After the change:
# perf stat --null ./test_progs -t uprobe_multi_test/consumers 2>&1
#421/9 uprobe_multi_test/consumers:OK
#421 uprobe_multi_test:OK
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
Performance counter stats for './test_progs -t uprobe_multi_test/consumers':
3.504790814 seconds time elapsed
0.012141000 seconds user
0.751760000 seconds sys
[1] commit 87195a1ee332 ("uprobes: switch to RCU Tasks Trace flavor for better performance")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-14-jolsa@kernel.org
|
|
Adding uprobe session consumers to the consumer test,
so we get the session into the test mix.
In addition scaling down the test to have just 1 uprobe
and 1 uretprobe, otherwise the test time grows and is
unsuitable for CI even with threads.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-13-jolsa@kernel.org
|
|
Testing that the session ret_handler bypass works on single
uprobe with multiple consumers, each with different session
ignore return value.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-12-jolsa@kernel.org
|
|
Making sure kprobe.session program can return only [0,1] values.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-11-jolsa@kernel.org
|
|
Making sure uprobe.session program can return only [0,1] values.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-10-jolsa@kernel.org
|
|
Adding uprobe session test that verifies the cookie value is stored
properly when single uprobe-ed function is executed recursively.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-9-jolsa@kernel.org
|
|
Adding uprobe session test that verifies the cookie value
get properly propagated from entry to return program.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-8-jolsa@kernel.org
|
|
Adding uprobe session test and testing that the entry program
return value controls execution of the return probe program.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-7-jolsa@kernel.org
|
|
Adding support to attach program in uprobe session mode
with bpf_program__attach_uprobe_multi function.
Adding session bool to bpf_uprobe_multi_opts struct that allows
to load and attach the bpf program via uprobe session.
the attachment to create uprobe multi session.
Also adding new program loader section that allows:
SEC("uprobe.session/bpf_fentry_test*")
and loads/attaches uprobe program as uprobe session.
Adding sleepable hook (uprobe.session.s) as well.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-6-jolsa@kernel.org
|
|
Adding support to attach BPF program for entry and return probe
of the same function. This is common use case which at the moment
requires to create two uprobe multi links.
Adding new BPF_TRACE_UPROBE_SESSION attach type that instructs
kernel to attach single link program to both entry and exit probe.
It's possible to control execution of the BPF program on return
probe simply by returning zero or non zero from the entry BPF
program execution to execute or not the BPF program on return
probe respectively.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-4-jolsa@kernel.org
|
|
The new uprobe changes bring some new behaviour that we need to reflect
in the consumer test. Now pending uprobe instance in the kernel can
survive longer and thus might call uretprobe consumer callbacks in
some situations in which, previously, such callback would be omitted.
We now need to take that into account in uprobe-multi consumer tests.
The idea being that uretprobe under test either stayed from before to
after (uret_stays + test_bit) or uretprobe instance survived and we
have uretprobe active in after (uret_survives + test_bit).
uret_survives just states that uretprobe survives if there are *any*
uretprobes both before and after (overlapping or not, doesn't matter)
and uprobe was attached before.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241107094337.3848210-1-jolsa@kernel.org
|
|
In order to specify extra compilation or linking flags to BPF selftests,
it is possible to set EXTRA_CFLAGS and EXTRA_LDFLAGS from the command
line. The problem is that they are not propagated to sub-make calls
(runqslower, bpftool, libbpf) and in the better case are not applied, in
the worse case cause the entire build fail.
Propagate EXTRA_CFLAGS and EXTRA_LDFLAGS to the sub-makes.
This, for instance, allows to build selftests as PIE with
$ make EXTRA_CFLAGS='-fPIE' EXTRA_LDFLAGS='-pie'
Without this change, the command would fail because libbpf.a would not
be built with -fPIE and other PIE binaries would not link against it.
The only problem is that we have to explicitly provide empty
EXTRA_CFLAGS='' and EXTRA_LDFLAGS='' to the builds of kernel modules as
we don't want to build modules with flags used for userspace (the above
example would fail as kernel doesn't support PIE).
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
Alexandre Ghiti <alexghiti@rivosinc.com> says:
This implements [cmp]xchgXX() macros using Zacas and Zabha extensions
and finally uses those newly introduced macros to add support for
qspinlocks: note that this implementation of qspinlocks satisfies the
forward progress guarantee.
It also uses Ziccrse to provide the qspinlock implementation.
Thanks to Guo and Leonardo for their work!
* b4-shazam-merge: (1314 commits)
riscv: Add qspinlock support
dt-bindings: riscv: Add Ziccrse ISA extension description
riscv: Add ISA extension parsing for Ziccrse
asm-generic: ticket-lock: Add separate ticket-lock.h
asm-generic: ticket-lock: Reuse arch_spinlock_t of qspinlock
riscv: Implement xchg8/16() using Zabha
riscv: Implement arch_cmpxchg128() using Zacas
riscv: Improve zacas fully-ordered cmpxchg()
riscv: Implement cmpxchg8/16() using Zabha
dt-bindings: riscv: Add Zabha ISA extension description
riscv: Implement cmpxchg32/64() using Zacas
riscv: Do not fail to build on byte/halfword operations with Zawrs
riscv: Move cpufeature.h macros into their own header
Link: https://lore.kernel.org/r/20241103145153.105097-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
|
|
Check if the PFCR query reported in userspace coincides with the
kernel reported function list. Right now we don't mask the functions
in the kernel so they have to be the same.
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Hariharan Mari <hari55@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107152319.77816-5-brueckner@linux.ibm.com
[frankja@linux.ibm.com: Added commit description]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107152319.77816-5-brueckner@linux.ibm.com>
|
|
The length of the interrupt parameters (IP) are:
a: 2 bytes
b: 4 bytes
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107141024.238916-6-schlameuss@linux.ibm.com
[frankja@linux.ibm.com: Fixed patch prefix]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107141024.238916-6-schlameuss@linux.ibm.com>
|
|
Checkpatch thinks that we're doing a multiplication but we're obviously
not. Fix 4 instances where we adhered to wrong checkpatch advice.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107141024.238916-5-schlameuss@linux.ibm.com
[frankja@linux.ibm.com: Fixed patch prefix]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107141024.238916-5-schlameuss@linux.ibm.com>
|
|
Add a test case verifying KVM_SET_USER_MEMORY_REGION and
KVM_SET_USER_MEMORY_REGION2 cannot be executed on ucontrol VMs.
Executing this test case on not patched kernels will cause a null
pointer dereference in the host kernel.
This is fixed with commit:
commit 7816e58967d0 ("kvm: s390: Reject memory region operations for ucontrol VMs")
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107141024.238916-4-schlameuss@linux.ibm.com
[frankja@linux.ibm.com: Fixed patch prefix]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107141024.238916-4-schlameuss@linux.ibm.com>
|
|
Add a test case manipulating s390 storage keys from within the ucontrol
VM.
Storage key instruction (ISKE, SSKE and RRBE) intercepts and
Keyless-subset facility are disabled on first use, where the skeys are
setup by KVM in non ucontrol VMs.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20241108091620.289406-1-schlameuss@linux.ibm.com
Acked-by: Janosch Frank <frankja@linux.ibm.com>
[frankja@linux.ibm.com: Fixed patch prefix]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241108091620.289406-1-schlameuss@linux.ibm.com>
|
|
Add a test case verifying basic running and interaction of ucontrol VMs.
Fill the segment and page tables for allocated memory and map memory on
first access.
* uc_map_unmap
Store and load data to mapped and unmapped memory and use pic segment
translation handling to map memory on access.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link:
https://lore.kernel.org/r/20241107141024.238916-2-schlameuss@linux.ibm.com
[frankja@linux.ibm.com: Fixed patch prefix]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107141024.238916-2-schlameuss@linux.ibm.com>
|
|
For some, as of yet unexplained reason, Clang-19, but not GCC,
generates and endless stream of:
drivers/iio/imu/bno055/bno055_ser.o: warning: objtool: __tracepoint_send_chunk+0x20: data relocation to !ENDBR: __SCT__tp_func_send_chunk+0x0
drivers/iio/imu/bno055/bno055_ser.o: warning: objtool: __tracepoint_cmd_retry+0x20: data relocation to !ENDBR: __SCT__tp_func_cmd_retry+0x0
drivers/iio/imu/bno055/bno055_ser.o: warning: objtool: __tracepoint_write_reg+0x20: data relocation to !ENDBR: __SCT__tp_func_write_reg+0x0
drivers/iio/imu/bno055/bno055_ser.o: warning: objtool: __tracepoint_read_reg+0x20: data relocation to !ENDBR: __SCT__tp_func_read_reg+0x0
drivers/iio/imu/bno055/bno055_ser.o: warning: objtool: __tracepoint_recv+0x20: data relocation to !ENDBR: __SCT__tp_func_recv+0x0
Which is entirely correct, but harmless. Add the __tracepoints section
to the exclusion list.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241108184618.GG38786@noisy.programming.kicks-ass.net
|
|
Utilise the kselftest harmness to implement tests for the guard page
implementation.
We start by implement basic tests asserting that guard pages can be
installed, removed and that touching guard pages result in SIGSEGV. We
also assert that, in removing guard pages from a range, non-guard pages
remain intact.
We then examine different operations on regions containing guard markers
behave to ensure correct behaviour:
* Operations over multiple VMAs operate as expected.
* Invoking MADV_GUARD_INSTALL / MADV_GUARD_REMOVE via process_madvise() in
batches works correctly.
* Ensuring that munmap() correctly tears down guard markers.
* Using mprotect() to adjust protection bits does not in any way override
or cause issues with guard markers.
* Ensuring that splitting and merging VMAs around guard markers causes no
issue - i.e. that a marker which 'belongs' to one VMA can function just
as well 'belonging' to another.
* Ensuring that madvise(..., MADV_DONTNEED) and madvise(..., MADV_FREE)
do not remove guard markers.
* Ensuring that mlock()'ing a range containing guard markers does not
cause issues.
* Ensuring that mremap() can move a guard range and retain guard markers.
* Ensuring that mremap() can expand a guard range and retain guard
markers (perhaps moving the range).
* Ensuring that mremap() can shrink a guard range and retain guard markers.
* Ensuring that forking a process correctly retains guard markers.
* Ensuring that forking a VMA with VM_WIPEONFORK set behaves sanely.
* Ensuring that lazyfree simply clears guard markers.
* Ensuring that userfaultfd can co-exist with guard pages.
* Ensuring that madvise(..., MADV_POPULATE_READ) and
madvise(..., MADV_POPULATE_WRITE) error out when encountering
guard markers.
* Ensuring that madvise(..., MADV_COLD) and madvise(..., MADV_PAGEOUT) do
not remove guard markers.
If any test is unable to be run due to lack of permissions, that test is
skipped.
Link: https://lkml.kernel.org/r/c3dcca76b736bac0aeaf1dc085927536a253ac94.1730123433.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Jann Horn <jannh@google.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vlastimil Babka <vbabkba@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Import the new MADV_GUARD_INSTALL/REMOVE madvise flags.
Link: https://lkml.kernel.org/r/ada462fa73fa1defc114242e446ab625b8290b71.1730123433.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Jann Horn <jannh@google.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vlastimil Babka <vbabkba@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pick up e7ac4daeed91 ("mm: count zeromap read and set for swapout and
swapin") in order to move
mm: define obj_cgroup_get() if CONFIG_MEMCG is not defined
mm: zswap: modify zswap_compress() to accept a page instead of a folio
mm: zswap: rename zswap_pool_get() to zswap_pool_tryget()
mm: zswap: modify zswap_stored_pages to be atomic_long_t
mm: zswap: support large folios in zswap_store()
mm: swap: count successful large folio zswap stores in hugepage zswpout stats
mm: zswap: zswap_store_page() will initialize entry after adding to xarray.
mm: add per-order mTHP swpin counters
from mm-unstable into mm-stable.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"20 hotfixes, 14 of which are cc:stable.
Three affect DAMON. Lorenzo's five-patch series to address the
mmap_region error handling is here also.
Apart from that, various singletons"
* tag 'mm-hotfixes-stable-2024-11-09-22-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add entry for Thorsten Blum
ocfs2: remove entry once instead of null-ptr-dereference in ocfs2_xa_remove()
signal: restore the override_rlimit logic
fs/proc: fix compile warning about variable 'vmcore_mmap_ops'
ucounts: fix counter leak in inc_rlimit_get_ucounts()
selftests: hugetlb_dio: check for initial conditions to skip in the start
mm: fix docs for the kernel parameter ``thp_anon=``
mm/damon/core: avoid overflow in damon_feed_loop_next_input()
mm/damon/core: handle zero schemes apply interval
mm/damon/core: handle zero {aggregation,ops_update} intervals
mm/mlock: set the correct prev on failure
objpool: fix to make percpu slot allocation more robust
mm/page_alloc: keep track of free highatomic
mm: resolve faulty mmap_region() error path behaviour
mm: refactor arch_calc_vm_flag_bits() and arm64 MTE handling
mm: refactor map_deny_write_exec()
mm: unconditionally close VMAs on error
mm: avoid unsafe VMA hook invocation when error arises on mmap hook
mm/thp: fix deferred split unqueue naming and locking
mm/thp: fix deferred split queue not partially_mapped
|
|
It is currently impossible to delete individual FDB entries (as opposed
to flushing) that were added with a VLAN that no longer exists:
# ip link add name dummy1 up type dummy
# ip link add name br1 up type bridge vlan_filtering 1
# ip link set dev dummy1 master br1
# bridge fdb add 00:11:22:33:44:55 dev dummy1 master static vlan 1
# bridge vlan del vid 1 dev dummy1
# bridge fdb get 00:11:22:33:44:55 br br1 vlan 1
00:11:22:33:44:55 dev dummy1 vlan 1 master br1 static
# bridge fdb del 00:11:22:33:44:55 dev dummy1 master vlan 1
RTNETLINK answers: Invalid argument
# bridge fdb get 00:11:22:33:44:55 br br1 vlan 1
00:11:22:33:44:55 dev dummy1 vlan 1 master br1 static
This is in contrast to MDB entries that can be deleted after the VLAN
was deleted:
# bridge vlan add vid 10 dev dummy1
# bridge mdb add dev br1 port dummy1 grp 239.1.1.1 permanent vid 10
# bridge vlan del vid 10 dev dummy1
# bridge mdb get dev br1 grp 239.1.1.1 vid 10
dev br1 port dummy1 grp 239.1.1.1 permanent vid 10
# bridge mdb del dev br1 port dummy1 grp 239.1.1.1 permanent vid 10
# bridge mdb get dev br1 grp 239.1.1.1 vid 10
Error: bridge: MDB entry not found.
Align the two interfaces and allow user space to delete FDB entries that
were added with a VLAN that no longer exists:
# ip link add name dummy1 up type dummy
# ip link add name br1 up type bridge vlan_filtering 1
# ip link set dev dummy1 master br1
# bridge fdb add 00:11:22:33:44:55 dev dummy1 master static vlan 1
# bridge vlan del vid 1 dev dummy1
# bridge fdb get 00:11:22:33:44:55 br br1 vlan 1
00:11:22:33:44:55 dev dummy1 vlan 1 master br1 static
# bridge fdb del 00:11:22:33:44:55 dev dummy1 master vlan 1
# bridge fdb get 00:11:22:33:44:55 br br1 vlan 1
Error: Fdb entry not found.
Add a selftest to make sure this behavior does not regress:
# ./rtnetlink.sh -t kci_test_fdb_del
PASS: bridge fdb del
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Andy Roulin <aroulin@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241105133954.350479-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 55d42a0c3f9c ("selftests: net: add a test for closing
a netlink socket ith dump in progress") added a new test
but did not add it to gitignore.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241108004731.2979878-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
PERF_HAVE_DWARF_REGS was true when an architecture had a dwarf-regs.c
file. There are no more architecture dwarf-regs.c files, selection is
done using constants from the ELF file rather than conditional
compilation. When removing PERF_HAVE_DWARF_REGS was the only variable
in the Makefile, remove the Makefile.
Add missing SPDX for RISC-V Makefile.
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241108234606.429459-21-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
get_arch_regstr no longer exists so remove declaration. Associated ifs
and switches are made unconditional.
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241108234606.429459-20-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The file just provides the function get_arch_regstr, however, if in
the only caller get_dwarf_regstr EM_HOST is used for the EM_NONE case
the function can never be called. So remove as dead code. As this is
the only file in the arch/xtensa/util clean up Build files. Tidy up the
EM_NONE cases for xtensa in dwarf-regs.c.
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241108234606.429459-19-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
