| Age | Commit message (Collapse) | Author |
|---|
|
scx_bpf_dsq_move[_vtime]*()
In sched_ext API, a repeatedly reported pain point is the overuse of the
verb "dispatch" and confusion around "consume":
- ops.dispatch()
- scx_bpf_dispatch[_vtime]()
- scx_bpf_consume()
- scx_bpf_dispatch[_vtime]_from_dsq*()
This overloading of the term is historical. Originally, there were only
built-in DSQs and moving a task into a DSQ always dispatched it for
execution. Using the verb "dispatch" for the kfuncs to move tasks into these
DSQs made sense.
Later, user DSQs were added and scx_bpf_dispatch[_vtime]() updated to be
able to insert tasks into any DSQ. The only allowed DSQ to DSQ transfer was
from a non-local DSQ to a local DSQ and this operation was named "consume".
This was already confusing as a task could be dispatched to a user DSQ from
ops.enqueue() and then the DSQ would have to be consumed in ops.dispatch().
Later addition of scx_bpf_dispatch_from_dsq*() made the confusion even worse
as "dispatch" in this context meant moving a task to an arbitrary DSQ from a
user DSQ.
Clean up the API with the following renames:
1. scx_bpf_dispatch[_vtime]() -> scx_bpf_dsq_insert[_vtime]()
2. scx_bpf_consume() -> scx_bpf_dsq_move_to_local()
3. scx_bpf_dispatch[_vtime]_from_dsq*() -> scx_bpf_dsq_move[_vtime]*()
This patch performs the third set of renames. Compatibility is maintained
by:
- The previous kfunc names are still provided by the kernel so that old
binaries can run. Kernel generates a warning when the old names are used.
- compat.bpf.h provides wrappers for the new names which automatically fall
back to the old names when running on older kernels. They also trigger
build error if old names are used for new builds.
- scx_bpf_dispatch[_vtime]_from_dsq*() were already wrapped in __COMPAT
macros as they were introduced during v6.12 cycle. Wrap new API in
__COMPAT macros too and trigger build errors on both __COMPAT prefixed and
naked usages of the old names.
The compat features will be dropped after v6.15.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
Acked-by: Johannes Bechberger <me@mostlynerdless.de>
Acked-by: Giovanni Gherdovich <ggherdovich@suse.com>
Cc: Dan Schatzberg <dschatzberg@meta.com>
Cc: Ming Yang <yougmark94@gmail.com>
|
|
In sched_ext API, a repeatedly reported pain point is the overuse of the
verb "dispatch" and confusion around "consume":
- ops.dispatch()
- scx_bpf_dispatch[_vtime]()
- scx_bpf_consume()
- scx_bpf_dispatch[_vtime]_from_dsq*()
This overloading of the term is historical. Originally, there were only
built-in DSQs and moving a task into a DSQ always dispatched it for
execution. Using the verb "dispatch" for the kfuncs to move tasks into these
DSQs made sense.
Later, user DSQs were added and scx_bpf_dispatch[_vtime]() updated to be
able to insert tasks into any DSQ. The only allowed DSQ to DSQ transfer was
from a non-local DSQ to a local DSQ and this operation was named "consume".
This was already confusing as a task could be dispatched to a user DSQ from
ops.enqueue() and then the DSQ would have to be consumed in ops.dispatch().
Later addition of scx_bpf_dispatch_from_dsq*() made the confusion even worse
as "dispatch" in this context meant moving a task to an arbitrary DSQ from a
user DSQ.
Clean up the API with the following renames:
1. scx_bpf_dispatch[_vtime]() -> scx_bpf_dsq_insert[_vtime]()
2. scx_bpf_consume() -> scx_bpf_dsq_move_to_local()
3. scx_bpf_dispatch[_vtime]_from_dsq*() -> scx_bpf_dsq_move[_vtime]*()
This patch performs the second rename. Compatibility is maintained by:
- The previous kfunc names are still provided by the kernel so that old
binaries can run. Kernel generates a warning when the old names are used.
- compat.bpf.h provides wrappers for the new names which automatically fall
back to the old names when running on older kernels. They also trigger
build error if old names are used for new builds.
The compat features will be dropped after v6.15.
v2: Comment and documentation updates.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
Acked-by: Johannes Bechberger <me@mostlynerdless.de>
Acked-by: Giovanni Gherdovich <ggherdovich@suse.com>
Cc: Dan Schatzberg <dschatzberg@meta.com>
Cc: Ming Yang <yougmark94@gmail.com>
|
|
In sched_ext API, a repeatedly reported pain point is the overuse of the
verb "dispatch" and confusion around "consume":
- ops.dispatch()
- scx_bpf_dispatch[_vtime]()
- scx_bpf_consume()
- scx_bpf_dispatch[_vtime]_from_dsq*()
This overloading of the term is historical. Originally, there were only
built-in DSQs and moving a task into a DSQ always dispatched it for
execution. Using the verb "dispatch" for the kfuncs to move tasks into these
DSQs made sense.
Later, user DSQs were added and scx_bpf_dispatch[_vtime]() updated to be
able to insert tasks into any DSQ. The only allowed DSQ to DSQ transfer was
from a non-local DSQ to a local DSQ and this operation was named "consume".
This was already confusing as a task could be dispatched to a user DSQ from
ops.enqueue() and then the DSQ would have to be consumed in ops.dispatch().
Later addition of scx_bpf_dispatch_from_dsq*() made the confusion even worse
as "dispatch" in this context meant moving a task to an arbitrary DSQ from a
user DSQ.
Clean up the API with the following renames:
1. scx_bpf_dispatch[_vtime]() -> scx_bpf_dsq_insert[_vtime]()
2. scx_bpf_consume() -> scx_bpf_dsq_move_to_local()
3. scx_bpf_dispatch[_vtime]_from_dsq*() -> scx_bpf_dsq_move[_vtime]*()
This patch performs the first set of renames. Compatibility is maintained
by:
- The previous kfunc names are still provided by the kernel so that old
binaries can run. Kernel generates a warning when the old names are used.
- compat.bpf.h provides wrappers for the new names which automatically fall
back to the old names when running on older kernels. They also trigger
build error if old names are used for new builds.
The compat features will be dropped after v6.15.
v2: Documentation updates.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
Acked-by: Johannes Bechberger <me@mostlynerdless.de>
Acked-by: Giovanni Gherdovich <ggherdovich@suse.com>
Cc: Dan Schatzberg <dschatzberg@meta.com>
Cc: Ming Yang <yougmark94@gmail.com>
|
|
Logic to prevent callbacks from acquiring new references for the program
(i.e. leaving acquired references), and releasing caller references
(i.e. those acquired in parent frames) was introduced in commit
9d9d00ac29d0 ("bpf: Fix reference state management for synchronous callbacks").
This was necessary because back then, the verifier simulated each
callback once (that could potentially be executed N times, where N can
be zero). This meant that callbacks that left lingering resources or
cleared caller resources could do it more than once, operating on
undefined state or leaking memory.
With the fixes to callback verification in commit
ab5cfac139ab ("bpf: verify callbacks as if they are called unknown number of times"),
all of this extra logic is no longer necessary. Hence, drop it as part
of this commit.
Cc: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241109231430.2475236-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
The timer_lockup test needs 2 CPUs to work, on single-CPU nodes it fails
to set thread affinity to CPU 1 since it doesn't exist:
# ./test_progs -t timer_lockup
test_timer_lockup:PASS:timer_lockup__open_and_load 0 nsec
test_timer_lockup:PASS:pthread_create thread1 0 nsec
test_timer_lockup:PASS:pthread_create thread2 0 nsec
timer_lockup_thread:PASS:cpu affinity 0 nsec
timer_lockup_thread:FAIL:cpu affinity unexpected error: 22 (errno 0)
test_timer_lockup:PASS: 0 nsec
#406 timer_lockup:FAIL
Skip the test if only 1 CPU is available.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Fixes: 50bd5a0c658d1 ("selftests/bpf: Add timer lockup selftest")
Tested-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241107115231.75200-1-vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
Add test cases to verify the following four update operations on htab of
maps don't trigger lockdep warning:
(1) add then delete
(2) add, overwrite, then delete
(3) add, then lookup_and_delete
(4) add two elements, then lookup_and_delete_batch
Test cases are added for pre-allocated and non-preallocated htab of maps
respectively.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241106063542.357743-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
Moving the definition of ENOTSUPP into bpf_util.h to remove the
duplicated definitions in multiple files.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241106063542.357743-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
With recent uprobe fix [1] the sync time after unregistering uprobe is
much longer and prolongs the consumer test which creates and destroys
hundreds of uprobes.
This change adds 16 threads (which fits the test logic) and speeds up
the test.
Before the change:
# perf stat --null ./test_progs -t uprobe_multi_test/consumers
#421/9 uprobe_multi_test/consumers:OK
#421 uprobe_multi_test:OK
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
Performance counter stats for './test_progs -t uprobe_multi_test/consumers':
28.818778973 seconds time elapsed
0.745518000 seconds user
0.919186000 seconds sys
After the change:
# perf stat --null ./test_progs -t uprobe_multi_test/consumers 2>&1
#421/9 uprobe_multi_test/consumers:OK
#421 uprobe_multi_test:OK
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
Performance counter stats for './test_progs -t uprobe_multi_test/consumers':
3.504790814 seconds time elapsed
0.012141000 seconds user
0.751760000 seconds sys
[1] commit 87195a1ee332 ("uprobes: switch to RCU Tasks Trace flavor for better performance")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-14-jolsa@kernel.org
|
|
Adding uprobe session consumers to the consumer test,
so we get the session into the test mix.
In addition scaling down the test to have just 1 uprobe
and 1 uretprobe, otherwise the test time grows and is
unsuitable for CI even with threads.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-13-jolsa@kernel.org
|
|
Testing that the session ret_handler bypass works on single
uprobe with multiple consumers, each with different session
ignore return value.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-12-jolsa@kernel.org
|
|
Making sure kprobe.session program can return only [0,1] values.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-11-jolsa@kernel.org
|
|
Making sure uprobe.session program can return only [0,1] values.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-10-jolsa@kernel.org
|
|
Adding uprobe session test that verifies the cookie value is stored
properly when single uprobe-ed function is executed recursively.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-9-jolsa@kernel.org
|
|
Adding uprobe session test that verifies the cookie value
get properly propagated from entry to return program.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-8-jolsa@kernel.org
|
|
Adding uprobe session test and testing that the entry program
return value controls execution of the return probe program.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-7-jolsa@kernel.org
|
|
Adding support to attach program in uprobe session mode
with bpf_program__attach_uprobe_multi function.
Adding session bool to bpf_uprobe_multi_opts struct that allows
to load and attach the bpf program via uprobe session.
the attachment to create uprobe multi session.
Also adding new program loader section that allows:
SEC("uprobe.session/bpf_fentry_test*")
and loads/attaches uprobe program as uprobe session.
Adding sleepable hook (uprobe.session.s) as well.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-6-jolsa@kernel.org
|
|
Adding support to attach BPF program for entry and return probe
of the same function. This is common use case which at the moment
requires to create two uprobe multi links.
Adding new BPF_TRACE_UPROBE_SESSION attach type that instructs
kernel to attach single link program to both entry and exit probe.
It's possible to control execution of the BPF program on return
probe simply by returning zero or non zero from the entry BPF
program execution to execute or not the BPF program on return
probe respectively.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-4-jolsa@kernel.org
|
|
The new uprobe changes bring some new behaviour that we need to reflect
in the consumer test. Now pending uprobe instance in the kernel can
survive longer and thus might call uretprobe consumer callbacks in
some situations in which, previously, such callback would be omitted.
We now need to take that into account in uprobe-multi consumer tests.
The idea being that uretprobe under test either stayed from before to
after (uret_stays + test_bit) or uretprobe instance survived and we
have uretprobe active in after (uret_survives + test_bit).
uret_survives just states that uretprobe survives if there are *any*
uretprobes both before and after (overlapping or not, doesn't matter)
and uprobe was attached before.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241107094337.3848210-1-jolsa@kernel.org
|
|
In order to specify extra compilation or linking flags to BPF selftests,
it is possible to set EXTRA_CFLAGS and EXTRA_LDFLAGS from the command
line. The problem is that they are not propagated to sub-make calls
(runqslower, bpftool, libbpf) and in the better case are not applied, in
the worse case cause the entire build fail.
Propagate EXTRA_CFLAGS and EXTRA_LDFLAGS to the sub-makes.
This, for instance, allows to build selftests as PIE with
$ make EXTRA_CFLAGS='-fPIE' EXTRA_LDFLAGS='-pie'
Without this change, the command would fail because libbpf.a would not
be built with -fPIE and other PIE binaries would not link against it.
The only problem is that we have to explicitly provide empty
EXTRA_CFLAGS='' and EXTRA_LDFLAGS='' to the builds of kernel modules as
we don't want to build modules with flags used for userspace (the above
example would fail as kernel doesn't support PIE).
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
|
|
For some, as of yet unexplained reason, Clang-19, but not GCC,
generates and endless stream of:
drivers/iio/imu/bno055/bno055_ser.o: warning: objtool: __tracepoint_send_chunk+0x20: data relocation to !ENDBR: __SCT__tp_func_send_chunk+0x0
drivers/iio/imu/bno055/bno055_ser.o: warning: objtool: __tracepoint_cmd_retry+0x20: data relocation to !ENDBR: __SCT__tp_func_cmd_retry+0x0
drivers/iio/imu/bno055/bno055_ser.o: warning: objtool: __tracepoint_write_reg+0x20: data relocation to !ENDBR: __SCT__tp_func_write_reg+0x0
drivers/iio/imu/bno055/bno055_ser.o: warning: objtool: __tracepoint_read_reg+0x20: data relocation to !ENDBR: __SCT__tp_func_read_reg+0x0
drivers/iio/imu/bno055/bno055_ser.o: warning: objtool: __tracepoint_recv+0x20: data relocation to !ENDBR: __SCT__tp_func_recv+0x0
Which is entirely correct, but harmless. Add the __tracepoints section
to the exclusion list.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241108184618.GG38786@noisy.programming.kicks-ass.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"20 hotfixes, 14 of which are cc:stable.
Three affect DAMON. Lorenzo's five-patch series to address the
mmap_region error handling is here also.
Apart from that, various singletons"
* tag 'mm-hotfixes-stable-2024-11-09-22-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add entry for Thorsten Blum
ocfs2: remove entry once instead of null-ptr-dereference in ocfs2_xa_remove()
signal: restore the override_rlimit logic
fs/proc: fix compile warning about variable 'vmcore_mmap_ops'
ucounts: fix counter leak in inc_rlimit_get_ucounts()
selftests: hugetlb_dio: check for initial conditions to skip in the start
mm: fix docs for the kernel parameter ``thp_anon=``
mm/damon/core: avoid overflow in damon_feed_loop_next_input()
mm/damon/core: handle zero schemes apply interval
mm/damon/core: handle zero {aggregation,ops_update} intervals
mm/mlock: set the correct prev on failure
objpool: fix to make percpu slot allocation more robust
mm/page_alloc: keep track of free highatomic
mm: resolve faulty mmap_region() error path behaviour
mm: refactor arch_calc_vm_flag_bits() and arm64 MTE handling
mm: refactor map_deny_write_exec()
mm: unconditionally close VMAs on error
mm: avoid unsafe VMA hook invocation when error arises on mmap hook
mm/thp: fix deferred split unqueue naming and locking
mm/thp: fix deferred split queue not partially_mapped
|
|
It is currently impossible to delete individual FDB entries (as opposed
to flushing) that were added with a VLAN that no longer exists:
# ip link add name dummy1 up type dummy
# ip link add name br1 up type bridge vlan_filtering 1
# ip link set dev dummy1 master br1
# bridge fdb add 00:11:22:33:44:55 dev dummy1 master static vlan 1
# bridge vlan del vid 1 dev dummy1
# bridge fdb get 00:11:22:33:44:55 br br1 vlan 1
00:11:22:33:44:55 dev dummy1 vlan 1 master br1 static
# bridge fdb del 00:11:22:33:44:55 dev dummy1 master vlan 1
RTNETLINK answers: Invalid argument
# bridge fdb get 00:11:22:33:44:55 br br1 vlan 1
00:11:22:33:44:55 dev dummy1 vlan 1 master br1 static
This is in contrast to MDB entries that can be deleted after the VLAN
was deleted:
# bridge vlan add vid 10 dev dummy1
# bridge mdb add dev br1 port dummy1 grp 239.1.1.1 permanent vid 10
# bridge vlan del vid 10 dev dummy1
# bridge mdb get dev br1 grp 239.1.1.1 vid 10
dev br1 port dummy1 grp 239.1.1.1 permanent vid 10
# bridge mdb del dev br1 port dummy1 grp 239.1.1.1 permanent vid 10
# bridge mdb get dev br1 grp 239.1.1.1 vid 10
Error: bridge: MDB entry not found.
Align the two interfaces and allow user space to delete FDB entries that
were added with a VLAN that no longer exists:
# ip link add name dummy1 up type dummy
# ip link add name br1 up type bridge vlan_filtering 1
# ip link set dev dummy1 master br1
# bridge fdb add 00:11:22:33:44:55 dev dummy1 master static vlan 1
# bridge vlan del vid 1 dev dummy1
# bridge fdb get 00:11:22:33:44:55 br br1 vlan 1
00:11:22:33:44:55 dev dummy1 vlan 1 master br1 static
# bridge fdb del 00:11:22:33:44:55 dev dummy1 master vlan 1
# bridge fdb get 00:11:22:33:44:55 br br1 vlan 1
Error: Fdb entry not found.
Add a selftest to make sure this behavior does not regress:
# ./rtnetlink.sh -t kci_test_fdb_del
PASS: bridge fdb del
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Andy Roulin <aroulin@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241105133954.350479-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 55d42a0c3f9c ("selftests: net: add a test for closing
a netlink socket ith dump in progress") added a new test
but did not add it to gitignore.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241108004731.2979878-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix one issue in the qcom lmh thermal driver, a DT handling
issue in the thermal core and two issues in the userspace thermal
library:
- Allow tripless thermal zones defined in a DT to be registered in
accordance with the thermal DT bindings (Icenowy Zheng)
- Annotate LMH IRQs with lockdep classes to prevent lockdep from
reporting a possible recursive locking issue that cannot really
occur (Dmitry Baryshkov)
- Improve the thermal library "make clean" to remove a leftover
symbolic link created during compilation and fix the sampling
handler invocation in that library to pass the correct pointer to
it (Emil Dahl Juhl, zhang jiao)"
* tag 'thermal-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/of: support thermal zones w/o trips subnode
tools/lib/thermal: Remove the thermal.h soft link when doing make clean
tools/lib/thermal: Fix sampling handler context ptr
thermal/drivers/qcom/lmh: Remove false lockdep backtrace
|
|
On 2 x Intel Sapphire Rapids machines with 224 logical CPUs, a poorly
behaving BPF scheduler can live-lock the system by making multiple CPUs bang
on the same DSQ to the point where soft-lockup detection triggers before
SCX's own watchdog can take action. It also seems possible that the machine
can be live-locked enough to prevent scx_ops_helper, which is an RT task,
from running in a timely manner.
Implement scx_softlockup() which is called when three quarters of
soft-lockup threshold has passed. The function immediately enables the ops
breather and triggers an ops error to initiate ejection of the BPF
scheduler.
The previous and this patch combined enable the kernel to reliably recover
the system from live-lock conditions that can be triggered by a poorly
behaving BPF scheduler on Intel dual socket systems.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
|
|
In 08a7d2525511 ("tools arch x86: Sync the msr-index.h copy with the
kernel sources"), VMX_BASIC_MEM_TYPE_WB was removed. Use X86_MEMTYPE_WB
instead.
Fixes: 08a7d2525511 ("tools arch x86: Sync the msr-index.h copy with the
kernel sources")
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Message-ID: <20241106034031.503291-1-jsperbeck@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM x86 and selftests fixes for 6.12:
- Increase the timeout for the memslot performance selftest to avoid false
failures on arm64 and nested x86 platforms.
- Fix a goof in the guest_memfd selftest where a for-loop initialized a
bit mask to zero instead of BIT(0).
- Disable strict aliasing when building KVM selftests to prevent the
compiler from treating things like "u64 *" to "uint64_t *" cases as
undefined behavior, which can lead to nasty, hard to debug failures.
- Force -march=x86-64-v2 for KVM x86 selftests if and only if the uarch
is supported by the compiler.
- When emulating a guest TLB flush for a nested guest, flush vpid01, not
vpid02, if L2 is active but VPID is disabled in vmcs12, i.e. if L2 and
L1 are sharing VPID '0' (from L1's perspective).
- Fix a bug in the SNP initialization flow where KVM would return '0' to
userspace instead of -errno on failure.
|
|
The test should be skipped if initial conditions aren't fulfilled in the
start instead of failing and outputting non-compliant TAP logs. This kind
of failure pollutes the results. The initial conditions are:
- The test should only execute if /tmp file can be allocated.
- The test should only execute if huge pages are free.
Before:
TAP version 13
1..4
Bail out! Error opening file
: Read-only file system (30)
# Planned tests != run tests (4 != 0)
# Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0
After:
TAP version 13
1..0 # SKIP Unable to allocate file: Read-only file system
Link: https://lkml.kernel.org/r/20241101141557.3159432-1-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Fixes: 3a103b5315b7 ("selftest: mm: Test if hugepage does not get leaked during __bio_release_pages()")
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 6e182dc9f268 ("selftests/mm: Use generic pkey register
manipulation") makes use of PKEY_UNRESTRICTED in
pkey_sighandler_tests. The macro has been proposed for addition to
uapi headers [1], but the patch hasn't landed yet.
Define PKEY_UNRESTRICTED in pkey-helpers.h for the time being to fix
the build.
[1] https://lore.kernel.org/all/20241028090715.509527-2-yury.khrustalev@arm.com/
Fixes: 6e182dc9f268 ("selftests/mm: Use generic pkey register manipulation")
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Link: https://lore.kernel.org/r/20241107131640.650703-1-kevin.brodsky@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Close a socket with dump in progress. We need a dump which generates
enough info not to fit into a single skb. Policy dump fits the bill.
Use the trick discovered by syzbot for keeping a ref on the socket
longer than just close, with mqueue.
TAP version 13
1..3
# Starting 3 tests from 1 test cases.
# RUN global.test_sanity ...
# OK global.test_sanity
ok 1 global.test_sanity
# RUN global.close_in_progress ...
# OK global.close_in_progress
ok 2 global.close_in_progress
# RUN global.close_with_ref ...
# OK global.close_with_ref
ok 3 global.close_with_ref
# PASSED: 3 / 3 tests passed.
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
Note that this test is not expected to fail but rather crash
the kernel if we get the cleanup wrong.
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241106015235.2458807-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc7).
Conflicts:
drivers/net/ethernet/freescale/enetc/enetc_pf.c
e15c5506dd39 ("net: enetc: allocate vf_state during PF probes")
3774409fd4c6 ("net: enetc: build enetc_pf_common.c as a separate module")
https://lore.kernel.org/20241105114100.118bd35e@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/ti/am65-cpsw-nuss.c
de794169cf17 ("net: ethernet: ti: am65-cpsw: Fix multi queue Rx on J7")
4a7b2ba94a59 ("net: ethernet: ti: am65-cpsw: Use tstats instead of open coded version")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently in fp-stress we test signal delivery to the test threads by
sending SIGUSR2 which simply counts how many signals are delivered. The
test programs now also all have a SIGUSR1 handler which for the threads
doing userspace testing additionally modifies the floating point register
state in the signal handler, verifying that when we return the saved
register state is restored from the signal context as expected. Switch over
to triggering that to validate that we are restoring as expected.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-6-c4b9622e36ee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The other stress test programs provide a SIGUSR1 handler which modifies the
live register state in order to validate that signal context is being
restored during signal return. While we can't usefully do this when testing
kernel mode FP usage provide a handler for SIGUSR1 which just counts the
number of signals like we do for SIGUSR2, allowing fp-stress to treat all
the test programs uniformly.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-5-c4b9622e36ee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently we don't use the irritator signal in our floating point stress
tests so when we added ZA and ZT stress tests we didn't actually bother
implementing any actual action in the handlers, we just counted the signal
deliveries. In preparation for using the irritators let's implement them,
just trivially SMSTOP and SMSTART to reset all bits in the register to 0.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-4-c4b9622e36ee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The irritator handlers for the fp-stress test programs all use ADR to load
an address into x0 which is then not referenced. Remove these ADRs as they
just cause confusion.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-2-c4b9622e36ee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The comments in the handlers for the irritator signal in the test threads
for fp-stress suggest that the irritator will corrupt the register state
observed by the main thread but this is not the case, instead the FPSIMD
and SVE irritators (which are the only ones that are implemented) modify
the current register state which is expected to be overwritten on return
from the handler by the saved register state. Update the comment to reflect
what the handler is actually doing.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-1-c4b9622e36ee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
While fp-stress is waiting for children to start it doesn't send any
signals to them so there is no need for it to have as short an epoll()
timeout as it does when the children are all running. We do still want to
have some timeout so that we can log diagnostics about missing children but
this can be relatively large. On emulated platforms the overhead of running
the supervisor process is quite high, especially during the process of
execing the test binaries.
Implement a longer epoll() timeout during the setup phase, using a 5s
timeout while waiting for children and switching to the signal raise
interval when all the children are started and we start sending signals.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241030-arm64-fp-stress-interval-v2-2-bd3cef48c22c@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently we only deliver signals to the processes being tested about once
a second, meaning that the signal code paths are subject to relatively
little stress. Increase this frequency substantially to 25ms intervals,
along with some minor refactoring to make this more readily tuneable and
maintain the 1s logging interval. This interval was chosen based on some
experimentation with emulated platforms to avoid causing so much extra load
that the test starts to run into the 45s limit for selftests or generally
completely disconnect the timeout numbers from the
We could increase this if we moved the signal generation out of the main
supervisor thread, though we should also consider that he percentage of
time that we spend interacting with the floating point state is also a
consideration.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241030-arm64-fp-stress-interval-v2-1-bd3cef48c22c@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Support setting the word delay using the -w/--word-delay command line
parameter. Note that spidev exposes word delay only as an u8, allowing
for a maximum of 255us of delay to be inserted.
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Link: https://patch.msgid.link/20241107-spidev-test-word-delay-v1-1-d4bba5569e39@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A recent refactor transformed the check for process completion
in a true statement, due to a typo.
As a result, the relevant test-case is unable to catch the
regression it was supposed to detect.
Restore the correct condition.
Fixes: 691bb4e49c98 ("selftests: net: avoid just another constant wait")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/0e6f213811f8e93a235307e683af8225cc6277ae.1730828007.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add more tests for test_txmsg_push_pop in test_sockmap for better coverage
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-6-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add push/pop checking for msg_verify_data in test_sockmap, except for
pop/push with cork tests, in these tests the logic will be different.
1. With corking, pop/push might not be invoked in each sendmsg, it makes
the layout of the received data difficult
2. It makes it hard to calculate the total_bytes in the recvmsg
Temporarily skip the data integrity test for these cases now, added a TODO
Fixes: ee9b352ce465 ("selftests/bpf: Fix msg_verify_data in test_sockmap")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-5-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
total_bytes in msg_loop_rx should also take push into account, otherwise
total_bytes will be a smaller value, which makes the msg_loop_rx end early.
Besides, total_bytes has already taken pop into account, so we don't need
to subtract some bytes from iov_buf in sendmsg_test. The additional
subtraction may make total_bytes a negative number, and msg_loop_rx will
just end without checking anything.
Fixes: 18d4e900a450 ("bpf: Selftests, improve test_sockmap total bytes counter")
Fixes: d69672147faa ("selftests, bpf: Add one test for sockmap with strparser")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-4-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
In the SENDPAGE test, "opt->iov_length * cnt" size of data will be sent
cnt times by sendfile.
1. In push/pop tests, they will be invoked cnt times, for the simplicity of
msg_verify_data, change chunk_sz to iov_length
2. Change iov_length in test_send_large from 1024 to 8192. We have pop test
where txmsg_start_pop is 4096. 4096 > 1024, an error will be returned.
Fixes: 328aa08a081b ("bpf: Selftests, break down test_sockmap into subtests")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-3-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add txmsg_pass to test_txmsg_pull/push/pop. If txmsg_pass is missing,
tx_prog will be NULL, and no program will be attached to the sockmap.
As a result, pull/push/pop are never invoked.
Fixes: 328aa08a081b ("bpf: Selftests, break down test_sockmap into subtests")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-2-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracefs fixes from Steven Rostedt:
"Fix tracefs mount options.
Commit 78ff64081949 ("vfs: Convert tracefs to use the new mount API")
broke the gid setting when set by fstab or other mount utility. It is
ignored when it is set. Fix the code so that it recognises the option
again and will honor the settings on mount at boot up.
Update the internal documentation and create a selftest to make sure
it doesn't break again in the future"
* tag 'tracefs-v6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/selftests: Add tracefs mount options test
tracing: Document tracefs gid mount option
tracing: Fix tracefs mount options
|
|
Stable tag for bpf-next's uprobe work.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
Corrected minor typo in tools/virtio/vringh_test.c:
- Fixed "retreives" to "retrieves"
Signed-off-by: Shivam Chaudhary <cvam0000@gmail.com>
Message-Id: <20241008145204.478749-1-cvam0000@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Updated to a more recent socat release and saw this:
socat E xioopen_ipdgram_listen(): unknown address family 0
socat W address is opened in read-write mode but only supports read-only
First error is avoided via pf=ipv4 option, second one via -u
(unidirectional) mode.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20241104142821.2608-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
