summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2022-09-02bpf: Support getting tunnel flagsShmulik Ladkani
Existing 'bpf_skb_get_tunnel_key' extracts various tunnel parameters (id, ttl, tos, local and remote) but does not expose ip_tunnel_info's tun_flags to the BPF program. It makes sense to expose tun_flags to the BPF program. Assume for example multiple GRE tunnels maintained on a single GRE interface in collect_md mode. The program expects origins to initiate over GRE, however different origins use different GRE characteristics (e.g. some prefer to use GRE checksum, some do not; some pass a GRE key, some do not, etc..). A BPF program getting tun_flags can therefore remember the relevant flags (e.g. TUNNEL_CSUM, TUNNEL_SEQ...) for each initiating remote. In the reply path, the program can use 'bpf_skb_set_tunnel_key' in order to correctly reply to the remote, using similar characteristics, based on the stored tunnel flags. Introduce BPF_F_TUNINFO_FLAGS flag for bpf_skb_get_tunnel_key. If specified, 'bpf_tunnel_key->tunnel_flags' is set with the tun_flags. Decided to use the existing unused 'tunnel_ext' as the storage for the 'tunnel_flags' in order to avoid changing bpf_tunnel_key's layout. Also, the following has been considered during the design: 1. Convert the "interesting" internal TUNNEL_xxx flags back to BPF_F_yyy and place into the new 'tunnel_flags' field. This has 2 drawbacks: - The BPF_F_yyy flags are from *set_tunnel_key* enumeration space, e.g. BPF_F_ZERO_CSUM_TX. It is awkward that it is "returned" into tunnel_flags from a *get_tunnel_key* call. - Not all "interesting" TUNNEL_xxx flags can be mapped to existing BPF_F_yyy flags, and it doesn't make sense to create new BPF_F_yyy flags just for purposes of the returned tunnel_flags. 2. Place key.tun_flags into 'tunnel_flags' but mask them, keeping only "interesting" flags. That's ok, but the drawback is that what's "interesting" for my usecase might be limiting for other usecases. Therefore I decided to expose what's in key.tun_flags *as is*, which seems most flexible. The BPF user can just choose to ignore bits he's not interested in. The TUNNEL_xxx are also UAPI, so no harm exposing them back in the get_tunnel_key call. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220831144010.174110-1-shmulik.ladkani@gmail.com
2022-09-01selftests: net: dsa: symlink the tc_actions.sh testVladimir Oltean
This has been validated on the Ocelot/Felix switch family (NXP LS1028A) and should be relevant to any switch driver that offloads the tc-flower and/or tc-matchall actions trap, drop, accept, mirred, for which DSA has operations. TEST: gact drop and ok (skip_hw) [ OK ] TEST: mirred egress flower redirect (skip_hw) [ OK ] TEST: mirred egress flower mirror (skip_hw) [ OK ] TEST: mirred egress matchall mirror (skip_hw) [ OK ] TEST: mirred_egress_to_ingress (skip_hw) [ OK ] TEST: gact drop and ok (skip_sw) [ OK ] TEST: mirred egress flower redirect (skip_sw) [ OK ] TEST: mirred egress flower mirror (skip_sw) [ OK ] TEST: mirred egress matchall mirror (skip_sw) [ OK ] TEST: trap (skip_sw) [ OK ] TEST: mirred_egress_to_ingress (skip_sw) [ OK ] Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220831170839.931184-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-01Merge tag 'kvm-s390-master-6.0-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD PCI interpretation compile fixes
2022-09-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
tools/testing/selftests/net/.gitignore sort the net-next version and use it Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-01selftests/bpf: Test concurrent updates on bpf_task_storage_busyHou Tao
Under full preemptible kernel, task local storage lookup operations on the same CPU may update per-cpu bpf_task_storage_busy concurrently. If the update of bpf_task_storage_busy is not preemption safe, the final value of bpf_task_storage_busy may become not-zero forever and bpf_task_storage_trylock() will always fail. So add a test case to ensure the update of bpf_task_storage_busy is preemption safe. Will skip the test case when CONFIG_PREEMPT is disabled, and it can only reproduce the problem probabilistically. By increasing TASK_STORAGE_MAP_NR_LOOP and running it under ARM64 VM with 4-cpus, it takes about four rounds to reproduce: > test_maps is modified to only run test_task_storage_map_stress_lookup() $ export TASK_STORAGE_MAP_NR_THREAD=256 $ export TASK_STORAGE_MAP_NR_LOOP=81920 $ export TASK_STORAGE_MAP_PIN_CPU=1 $ time ./test_maps test_task_storage_map_stress_lookup(135):FAIL:bad bpf_task_storage_busy got -2 real 0m24.743s user 0m6.772s sys 0m17.966s Signed-off-by: Hou Tao <houtao1@huawei.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/r/20220901061938.3789460-5-houtao@huaweicloud.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2022-09-01selftests/bpf: Move sys_pidfd_open() into task_local_storage_helpers.hHou Tao
sys_pidfd_open() is defined twice in both test_bprm_opts.c and test_local_storage.c, so move it to a common header file. And it will be used in map_tests as well. Signed-off-by: Hou Tao <houtao1@huawei.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/r/20220901061938.3789460-4-houtao@huaweicloud.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2022-09-01Merge tag 'net-6.0-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bluetooth, bpf and wireless. Current release - regressions: - bpf: - fix wrong last sg check in sk_msg_recvmsg() - fix kernel BUG in purge_effective_progs() - mac80211: - fix possible leak in ieee80211_tx_control_port() - potential NULL dereference in ieee80211_tx_control_port() Current release - new code bugs: - nfp: fix the access to management firmware hanging Previous releases - regressions: - ip: fix triggering of 'icmp redirect' - sched: tbf: don't call qdisc_put() while holding tree lock - bpf: fix corrupted packets for XDP_SHARED_UMEM - bluetooth: hci_sync: fix suspend performance regression - micrel: fix probe failure Previous releases - always broken: - tcp: make global challenge ack rate limitation per net-ns and default disabled - tg3: fix potential hang-up on system reboot - mac802154: fix reception for no-daddr packets Misc: - r8152: add PID for the lenovo onelink+ dock" * tag 'net-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (56 commits) net/smc: Remove redundant refcount increase Revert "sch_cake: Return __NET_XMIT_STOLEN when consuming enqueued skb" tcp: make global challenge ack rate limitation per net-ns and default disabled tcp: annotate data-race around challenge_timestamp net: dsa: hellcreek: Print warning only once ip: fix triggering of 'icmp redirect' sch_cake: Return __NET_XMIT_STOLEN when consuming enqueued skb selftests: net: sort .gitignore file Documentation: networking: correct possessive "its" kcm: fix strp_init() order and cleanup mlxbf_gige: compute MDIO period based on i1clk ethernet: rocker: fix sleep in atomic context bug in neigh_timer_handler net: lan966x: improve error handle in lan966x_fdma_rx_get_frame() nfp: fix the access to management firmware hanging net: phy: micrel: Make the GPIO to be non-exclusive net: virtio_net: fix notification coalescing comments net/sched: fix netdevice reference leaks in attach_default_qdiscs() net: sched: tbf: don't call qdisc_put() while holding tree lock net: Use u64_stats_fetch_begin_irq() for stats fetch. net: dsa: xrs700x: Use irqsave variant for u64 stats update ...
2022-09-01selftests/net: return back io_uring zc send testsPavel Begunkov
Enable io_uring zerocopy send tests back and fix them up to follow the new inteface. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/c8e5018c516093bdad0b6e19f2f9847dea17e4d2.1662027856.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-01selftests/net: temporarily disable io_uring zc testPavel Begunkov
We're going to change API, to avoid build problems with a couple of following commits, disable io_uring testing. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/12b7507223df04fbd12aa05fc0cb544b51d7ed79.1662027856.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-31net-next: Fix IP_UNICAST_IF option behavior for connected socketsRichard Gobert
The IP_UNICAST_IF socket option is used to set the outgoing interface for outbound packets. The IP_UNICAST_IF socket option was added as it was needed by the Wine project, since no other existing option (SO_BINDTODEVICE socket option, IP_PKTINFO socket option or the bind function) provided the needed characteristics needed by the IP_UNICAST_IF socket option. [1] The IP_UNICAST_IF socket option works well for unconnected sockets, that is, the interface specified by the IP_UNICAST_IF socket option is taken into consideration in the route lookup process when a packet is being sent. However, for connected sockets, the outbound interface is chosen when connecting the socket, and in the route lookup process which is done when a packet is being sent, the interface specified by the IP_UNICAST_IF socket option is being ignored. This inconsistent behavior was reported and discussed in an issue opened on systemd's GitHub project [2]. Also, a bug report was submitted in the kernel's bugzilla [3]. To understand the problem in more detail, we can look at what happens for UDP packets over IPv4 (The same analysis was done separately in the referenced systemd issue). When a UDP packet is sent the udp_sendmsg function gets called and the following happens: 1. The oif member of the struct ipcm_cookie ipc (which stores the output interface of the packet) is initialized by the ipcm_init_sk function to inet->sk.sk_bound_dev_if (the device set by the SO_BINDTODEVICE socket option). 2. If the IP_PKTINFO socket option was set, the oif member gets overridden by the call to the ip_cmsg_send function. 3. If no output interface was selected yet, the interface specified by the IP_UNICAST_IF socket option is used. 4. If the socket is connected and no destination address is specified in the send function, the struct ipcm_cookie ipc is not taken into consideration and the cached route, that was calculated in the connect function is being used. Thus, for a connected socket, the IP_UNICAST_IF sockopt isn't taken into consideration. This patch corrects the behavior of the IP_UNICAST_IF socket option for connect()ed sockets by taking into consideration the IP_UNICAST_IF sockopt when connecting the socket. In order to avoid reconnecting the socket, this option is still ignored when applied on an already connected socket until connect() is called again by the Richard Gobert. Change the __ip4_datagram_connect function, which is called during socket connection, to take into consideration the interface set by the IP_UNICAST_IF socket option, in a similar way to what is done in the udp_sendmsg function. [1] https://lore.kernel.org/netdev/1328685717.4736.4.camel@edumazet-laptop/T/ [2] https://github.com/systemd/systemd/issues/11935#issuecomment-618691018 [3] https://bugzilla.kernel.org/show_bug.cgi?id=210255 Signed-off-by: Richard Gobert <richardbgobert@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220829111554.GA1771@debian Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-31selftests/bpf: Add test cases for htab updateHou Tao
One test demonstrates the reentrancy of hash map update on the same bucket should fail, and another one shows concureently updates of the same hash map bucket should succeed and not fail due to the reentrancy checking for bucket lock. There is no trampoline support on s390x, so move htab_update to denylist. Signed-off-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20220831042629.130006-4-houtao@huaweicloud.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2022-08-31selftest/bpf: Ensure no module loading in bpf_setsockopt(TCP_CONGESTION)Martin KaFai Lau
This patch adds a test to ensure bpf_setsockopt(TCP_CONGESTION, "not_exist") will not trigger the kernel module autoload. Before the fix: [ 40.535829] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:274 [...] [ 40.552134] tcp_ca_find_autoload.constprop.0+0xcb/0x200 [ 40.552689] tcp_set_congestion_control+0x99/0x7b0 [ 40.553203] do_tcp_setsockopt+0x3ed/0x2240 [...] [ 40.556041] __bpf_setsockopt+0x124/0x640 Signed-off-by: Martin KaFai Lau <martin.lau@linux.dev> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220830231953.792412-1-martin.lau@linux.dev
2022-08-31selftests: net: sort .gitignore fileAxel Rasmussen
This is the result of `sort tools/testing/selftests/net/.gitignore`, but preserving the comment at the top. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Link: https://lore.kernel.org/r/20220829184748.1535580-1-axelrasmussen@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-31libbpf: Add GCC support for bpf_tail_call_staticJames Hilliard
The bpf_tail_call_static function is currently not defined unless using clang >= 8. To support bpf_tail_call_static on GCC we can check if __clang__ is not defined to enable bpf_tail_call_static. We need to use GCC assembly syntax when the compiler does not define __clang__ as LLVM inline assembly is not fully compatible with GCC. Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220829210546.755377-1-james.hilliard1@gmail.com
2022-08-31perf script: Skip dummy event attr checkJiri Olsa
Hongtao Yu reported problem when displaying uregs in perf script for system wide perf.data: # perf script -F uregs | head -10 Samples for 'dummy:HG' event do not have UREGS attribute set. Cannot print 'uregs' field. The problem is the extra dummy event added for system wide, which does not have proper sample_type setup. Skipping attr check completely for dummy event as suggested by Namhyung, because it does not have any samples anyway. Reported-by: Hongtao Yu <hoy@fb.com> Suggested-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220831124041.219925-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-31perf metric: Return early if no CPU PMU table existsIan Rogers
Previous behavior is to segfault if there is no CPU PMU table and a metric is sought. To reproduce compile with NO_JEVENTS=1 then request a metric, for example, "perf stat -M IPC true". Committer testing: Before: $ make -k NO_JEVENTS=1 BUILD_BPF_SKEL=1 O=/tmp/build/perf-urgent -C tools/perf install-bin $ perf stat -M IPC true Segmentation fault (core dumped) $ After: $ perf stat -M IPC true Usage: perf stat [<options>] [<command>] -M, --metrics <metric/metric group list> monitor specified metrics or metric groups (separated by ,) $ Fixes: 00facc760903be66 ("perf jevents: Switch build to use jevents.py") Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Caleb Biggers <caleb.biggers@intel.com> Cc: Florian Fischer <florian.fischer@muhq.space> Cc: Ian Rogers <rogers.email@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kshipra Bopardikar <kshipra.bopardikar@intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Miaoqian Lin <linmq006@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Perry Taylor <perry.taylor@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Link: https://lore.kernel.org/r/20220830164846.401143-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-31netfilter: remove nf_conntrack_helper sysctl and modparam togglesPablo Neira Ayuso
__nf_ct_try_assign_helper() remains in place but it now requires a template to configure the helper. A toggle to disable automatic helper assignment was added by: a9006892643a ("netfilter: nf_ct_helper: allow to disable automatic helper assignment") in 2012 to address the issues described in "Secure use of iptables and connection tracking helpers". Automatic conntrack helper assignment was disabled by: 3bb398d925ec ("netfilter: nf_ct_helper: disable automatic helper assignment") back in 2016. This patch removes the sysctl and modparam toggles, users now have to rely on explicit conntrack helper configuration via ruleset. Update tools/testing/selftests/netfilter/nft_conntrack_helper.sh to check that auto-assignment does not happen anymore. Acked-by: Aaron Conole <aconole@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-08-30bpftool: Add support for querying cgroup_iter linkHao Luo
Support dumping info of a cgroup_iter link. This includes showing the cgroup's id and the order for walking the cgroup hierarchy. Example output is as follows: > bpftool link show 1: iter prog 2 target_name bpf_map 2: iter prog 3 target_name bpf_prog 3: iter prog 12 target_name cgroup cgroup_id 72 order self_only > bpftool -p link show [{ "id": 1, "type": "iter", "prog_id": 2, "target_name": "bpf_map" },{ "id": 2, "type": "iter", "prog_id": 3, "target_name": "bpf_prog" },{ "id": 3, "type": "iter", "prog_id": 12, "target_name": "cgroup", "cgroup_id": 72, "order": "self_only" } ] Signed-off-by: Hao Luo <haoluo@google.com> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/r/20220829231828.1016835-1-haoluo@google.com Signed-off-by: Martin KaFai Lau <martin.lau@linux.dev>
2022-08-29selftests/bpf: Fix connect4_prog tcp/socket header type conflictJames Hilliard
There is a potential for us to hit a type conflict when including netinet/tcp.h and sys/socket.h, we can replace both of these includes with linux/tcp.h and bpf_tcp_helpers.h to avoid this conflict. Fixes errors like the below when compiling with gcc BPF backend: In file included from /usr/include/netinet/tcp.h:91, from progs/connect4_prog.c:11: /home/buildroot/opt/cross/lib/gcc/bpf/13.0.0/include/stdint.h:34:23: error: conflicting types for 'int8_t'; have 'char' 34 | typedef __INT8_TYPE__ int8_t; | ^~~~~~ In file included from /usr/include/x86_64-linux-gnu/sys/types.h:155, from /usr/include/x86_64-linux-gnu/bits/socket.h:29, from /usr/include/x86_64-linux-gnu/sys/socket.h:33, from progs/connect4_prog.c:10: /usr/include/x86_64-linux-gnu/bits/stdint-intn.h:24:18: note: previous declaration of 'int8_t' with type 'int8_t' {aka 'signed char'} 24 | typedef __int8_t int8_t; | ^~~~~~ /home/buildroot/opt/cross/lib/gcc/bpf/13.0.0/include/stdint.h:43:24: error: conflicting types for 'int64_t'; have 'long int' 43 | typedef __INT64_TYPE__ int64_t; | ^~~~~~~ /usr/include/x86_64-linux-gnu/bits/stdint-intn.h:27:19: note: previous declaration of 'int64_t' with type 'int64_t' {aka 'long long int'} 27 | typedef __int64_t int64_t; | ^~~~~~~ Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220829154710.3870139-1-james.hilliard1@gmail.com
2022-08-29selftests/bpf: Fix bind{4,6} tcp/socket header type conflictJames Hilliard
There is a potential for us to hit a type conflict when including netinet/tcp.h with sys/socket.h, we can remove these as they are not actually needed. Fixes errors like the below when compiling with gcc BPF backend: In file included from /usr/include/netinet/tcp.h:91, from progs/bind4_prog.c:10: /home/buildroot/opt/cross/lib/gcc/bpf/13.0.0/include/stdint.h:34:23: error: conflicting types for 'int8_t'; have 'char' 34 | typedef __INT8_TYPE__ int8_t; | ^~~~~~ In file included from /usr/include/x86_64-linux-gnu/sys/types.h:155, from /usr/include/x86_64-linux-gnu/bits/socket.h:29, from /usr/include/x86_64-linux-gnu/sys/socket.h:33, from progs/bind4_prog.c:9: /usr/include/x86_64-linux-gnu/bits/stdint-intn.h:24:18: note: previous declaration of 'int8_t' with type 'int8_t' {aka 'signed char'} 24 | typedef __int8_t int8_t; | ^~~~~~ /home/buildroot/opt/cross/lib/gcc/bpf/13.0.0/include/stdint.h:43:24: error: conflicting types for 'int64_t'; have 'long int' 43 | typedef __INT64_TYPE__ int64_t; | ^~~~~~~ /usr/include/x86_64-linux-gnu/bits/stdint-intn.h:27:19: note: previous declaration of 'int64_t' with type 'int64_t' {aka 'long long int'} 27 | typedef __int64_t int64_t; | ^~~~~~~ make: *** [Makefile:537: /home/buildroot/bpf-next/tools/testing/selftests/bpf/bpf_gcc/bind4_prog.o] Error 1 Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220826052925.980431-1-james.hilliard1@gmail.com
2022-08-28Merge tag 'x86-urgent-2022-08-28' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc x86 fixes from Ingo Molnar: - Fix PAT on Xen, which caused i915 driver failures - Fix compat INT 80 entry crash on Xen PV guests - Fix 'MMIO Stale Data' mitigation status reporting on older Intel CPUs - Fix RSB stuffing regressions - Fix ORC unwinding on ftrace trampolines - Add Intel Raptor Lake CPU model number - Fix (work around) a SEV-SNP bootloader bug providing bogus values in boot_params->cc_blob_address, by ignoring the value on !SEV-SNP bootups. - Fix SEV-SNP early boot failure - Fix the objtool list of noreturn functions and annotate snp_abort(), which bug confused objtool on gcc-12. - Fix the documentation for retbleed * tag 'x86-urgent-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation/ABI: Mention retbleed vulnerability info file for sysfs x86/sev: Mark snp_abort() noreturn x86/sev: Don't use cc_platform_has() for early SEV-SNP calls x86/boot: Don't propagate uninitialized boot_params->cc_blob_address x86/cpu: Add new Raptor Lake CPU model number x86/unwind/orc: Unwind ftrace trampolines with correct ORC entry x86/nospec: Fix i386 RSB stuffing x86/nospec: Unwreck the RSB stuffing x86/bugs: Add "unknown" reporting for MMIO Stale Data x86/entry: Fix entry_INT80_compat for Xen PV guests x86/PAT: Have pat_enabled() properly reflect state when running on Xen
2022-08-27perf stat: Capitalize topdown metrics' namesZhengjun Xing
Capitalize topdown metrics' names to follow the intel SDM. Before: # ./perf stat -a sleep 1 Performance counter stats for 'system wide': 228,094.05 msec cpu-clock # 225.026 CPUs utilized 842 context-switches # 3.691 /sec 224 cpu-migrations # 0.982 /sec 70 page-faults # 0.307 /sec 23,164,105 cycles # 0.000 GHz 29,403,446 instructions # 1.27 insn per cycle 5,268,185 branches # 23.097 K/sec 33,239 branch-misses # 0.63% of all branches 136,248,990 slots # 597.337 K/sec 32,976,450 topdown-retiring # 24.2% retiring 4,651,918 topdown-bad-spec # 3.4% bad speculation 26,148,695 topdown-fe-bound # 19.2% frontend bound 72,515,776 topdown-be-bound # 53.2% backend bound 6,008,540 topdown-heavy-ops # 4.4% heavy operations # 19.8% light operations 3,934,049 topdown-br-mispredict # 2.9% branch mispredict # 0.5% machine clears 16,655,439 topdown-fetch-lat # 12.2% fetch latency # 7.0% fetch bandwidth 41,635,972 topdown-mem-bound # 30.5% memory bound # 22.7% Core bound 1.013634593 seconds time elapsed After: # ./perf stat -a sleep 1 Performance counter stats for 'system wide': 228,081.94 msec cpu-clock # 225.003 CPUs utilized 824 context-switches # 3.613 /sec 224 cpu-migrations # 0.982 /sec 67 page-faults # 0.294 /sec 22,647,423 cycles # 0.000 GHz 28,870,551 instructions # 1.27 insn per cycle 5,167,099 branches # 22.655 K/sec 32,383 branch-misses # 0.63% of all branches 133,411,074 slots # 584.926 K/sec 32,352,607 topdown-retiring # 24.3% Retiring 4,456,977 topdown-bad-spec # 3.3% Bad Speculation 25,626,487 topdown-fe-bound # 19.2% Frontend Bound 70,955,316 topdown-be-bound # 53.2% Backend Bound 5,834,844 topdown-heavy-ops # 4.4% Heavy Operations # 19.9% Light Operations 3,738,781 topdown-br-mispredict # 2.8% Branch Mispredict # 0.5% Machine Clears 16,286,803 topdown-fetch-lat # 12.2% Fetch Latency # 7.0% Fetch Bandwidth 40,802,069 topdown-mem-bound # 30.6% Memory Bound # 22.6% Core Bound 1.013683125 seconds time elapsed Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220825015458.3252239-1-zhengjun.xing@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-27perf docs: Update the documentation for the save_type filterKan Liang
Update the documentation to reflect the kernel changes. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20220816125612.2042397-2-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-27perf sched: Fix memory leaks in __cmd_record detected with -fsanitize=addressIan Rogers
An array of strings is passed to cmd_record but not freed. As cmd_record modifies the array, add another array as a copy that can be mutated allowing the original array contents to all be freed. Detected with -fsanitize=address. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20220824145733.409005-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-27perf record: Fix manpage formatting of description of support to hybrid systemsAndi Kleen
The Intel hybrid description is written in a different style than the rest of the perf record man page. There were some new command line options added after it which resulted in very strange section ordering. Move the hybrid include last. Also the sub sections in the hybrid document don't fit the record manpage well (especially since it talks about all kinds of unrelated commands). I left this for now, but would be better to separate this properly in the different man pages. It would be better to use sub sections for the other sections, but these don't seem to be supported in AsciiDoc? Some of the examples are still misrendered in the manpage with an indented troff command, but I don't know how to fix that. In any case it's now better than before. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: zhengjun.xing@intel.com Link: https://lore.kernel.org/r/20220818100127.249401-1-ak@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-27perf test: Stat test for repeat with a weak groupIan Rogers
Breaking a weak group requires multiple passes of an evlist, with multiple runs this can introduce bugs ultimately leading to segfaults. Add a test to cover this. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20220822213352.75721-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-27perf stat: Clear evsel->reset_group for each stat runIan Rogers
If a weak group is broken then the reset_group flag remains set for the next run. Having reset_group set means the counter isn't created and ultimately a segfault. A simple reproduction of this is: # perf stat -r2 -e '{cycles,cycles,cycles,cycles,cycles,cycles,cycles,cycles,cycles,cycles}:W which will be added as a test in the next patch. Fixes: 4804e0111662d7d8 ("perf stat: Use affinity for opening events") Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20220822213352.75721-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-27tools kvm headers arm64: Update KVM header from the kernel sourcesArnaldo Carvalho de Melo
To pick the changes from: ae3b1da95413614f ("KVM: arm64: Fix compile error due to sign extension") That doesn't result in any changes in tooling (when built on x86), only addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h' diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/all/YwOMCCc4E79FuvDe@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-27perf python: Fix build when PYTHON_CONFIG is user suppliedJames Clark
The previous change to Python autodetection had a small mistake where the auto value was used to determine the Python binary, rather than the user supplied value. The Python binary is only used for one part of the build process, rather than the final linking, so it was producing correct builds in most scenarios, especially when the auto detected value matched what the user wanted, or the system only had a valid set of Pythons. Change it so that the Python binary path is derived from either the PYTHON_CONFIG value or PYTHON value, depending on what is specified by the user. This was the original intention. This error was spotted in a build failure an odd cross compilation environment after commit 4c41cb46a732fe82 ("perf python: Prefer python3") was merged. Fixes: 630af16eee495f58 ("perf tools: Use Python devtools for version autodetection rather than runtime") Signed-off-by: James Clark <james.clark@arm.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220728093946.1337642-1-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-26bpf: Fix a few typos in BPF helpers documentationQuentin Monnet
Address a few typos in the documentation for the BPF helper functions. They were reported by Jakub [0], who ran spell checkers on the generated man page [1]. [0] https://lore.kernel.org/linux-man/d22dcd47-023c-8f52-d369-7b5308e6c842@gmail.com/T/#mb02e7d4b7fb61d98fa914c77b581184e9a9537af [1] https://lore.kernel.org/linux-man/eb6a1e41-c48e-ac45-5154-ac57a2c76108@gmail.com/T/#m4a8d1b003616928013ffcd1450437309ab652f9f v3: Do not copy unrelated (and breaking) elements to tools/ header v2: Turn a ',' into a ';' Reported-by: Jakub Wilk <jwilk@jwilk.net> Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220825220806.107143-1-quentin@isovalent.com
2022-08-26selftests/bpf: Declare subprog_noise as static in tailcall_bpf2bpf4James Hilliard
Due to bpf_map_lookup_elem being declared static we need to also declare subprog_noise as static. Fixes the following error: progs/tailcall_bpf2bpf4.c:26:9: error: 'bpf_map_lookup_elem' is static but used in inline function 'subprog_noise' which is not static [-Werror] 26 | bpf_map_lookup_elem(&nop_table, &key); | ^~~~~~~~~~~~~~~~~~~ Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/bpf/20220826035141.737919-1-james.hilliard1@gmail.com
2022-08-26selftests/bpf: fix type conflict in test_tc_dtimeJames Hilliard
The sys/socket.h header isn't required to build test_tc_dtime and may cause a type conflict. Fixes the following error: In file included from /usr/include/x86_64-linux-gnu/sys/types.h:155, from /usr/include/x86_64-linux-gnu/bits/socket.h:29, from /usr/include/x86_64-linux-gnu/sys/socket.h:33, from progs/test_tc_dtime.c:18: /usr/include/x86_64-linux-gnu/bits/stdint-intn.h:24:18: error: conflicting types for 'int8_t'; have '__int8_t' {aka 'signed char'} 24 | typedef __int8_t int8_t; | ^~~~~~ In file included from progs/test_tc_dtime.c:5: /home/buildroot/opt/cross/lib/gcc/bpf/13.0.0/include/stdint.h:34:23: note: previous declaration of 'int8_t' with type 'int8_t' {aka 'char'} 34 | typedef __INT8_TYPE__ int8_t; | ^~~~~~ /usr/include/x86_64-linux-gnu/bits/stdint-intn.h:27:19: error: conflicting types for 'int64_t'; have '__int64_t' {aka 'long long int'} 27 | typedef __int64_t int64_t; | ^~~~~~~ /home/buildroot/opt/cross/lib/gcc/bpf/13.0.0/include/stdint.h:43:24: note: previous declaration of 'int64_t' with type 'int64_t' {aka 'long int'} 43 | typedef __INT64_TYPE__ int64_t; | ^~~~~~~ make: *** [Makefile:537: /home/buildroot/bpf-next/tools/testing/selftests/bpf/bpf_gcc/test_tc_dtime.o] Error 1 Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Link: https://lore.kernel.org/r/20220826050703.869571-1-james.hilliard1@gmail.com Signed-off-by: Martin KaFai Lau <kafai@fb.com>
2022-08-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel borkmann says: ==================== The following pull-request contains BPF updates for your *net* tree. We've added 11 non-merge commits during the last 14 day(s) which contain a total of 13 files changed, 61 insertions(+), 24 deletions(-). The main changes are: 1) Fix BPF verifier's precision tracking around BPF ring buffer, from Kumar Kartikeya Dwivedi. 2) Fix regression in tunnel key infra when passing FLOWI_FLAG_ANYSRC, from Eyal Birger. 3) Fix insufficient permissions for bpf_sys_bpf() helper, from YiFei Zhu. 4) Fix splat from hitting BUG when purging effective cgroup programs, from Pu Lehui. 5) Fix range tracking for array poke descriptors, from Daniel Borkmann. 6) Fix corrupted packets for XDP_SHARED_UMEM in aligned mode, from Magnus Karlsson. 7) Fix NULL pointer splat in BPF sockmap sk_msg_recvmsg(), from Liu Jian. 8) Add READ_ONCE() to bpf_jit_limit when reading from sysctl, from Kuniyuki Iwashima. 9) Add BPF selftest lru_bug check to s390x deny list, from Daniel Müller. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-25libbpf: add map_get_fd_by_id and map_delete_elem in light skeletonBenjamin Tissoires
This allows to have a better control over maps from the kernel when preloading eBPF programs. Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20220824134055.1328882-8-benjamin.tissoires@redhat.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-25bpf: Add CGROUP prefix to cgroup_iter_orderHao Luo
bpf_cgroup_iter_order is globally visible but the entries do not have CGROUP prefix. As requested by Andrii, put a CGROUP in the names in bpf_cgroup_iter_order. This patch fixes two previous commits: one introduced the API and the other uses the API in bpf selftest (that is, the selftest cgroup_hierarchical_stats). I tested this patch via the following command: test_progs -t cgroup,iter,btf_dump Fixes: d4ccaf58a847 ("bpf: Introduce cgroup iter") Fixes: 88886309d2e8 ("selftests/bpf: add a selftest for cgroup hierarchical stats collection") Suggested-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Hao Luo <haoluo@google.com> Link: https://lore.kernel.org/r/20220825223936.1865810-1-haoluo@google.com Signed-off-by: Martin KaFai Lau <kafai@fb.com>
2022-08-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/ethernet/mellanox/mlx5/core/en_fs.c 21234e3a84c7 ("net/mlx5e: Fix use after free in mlx5e_fs_init()") c7eafc5ed068 ("net/mlx5e: Convert ethtool_steering member of flow_steering struct to pointer") https://lore.kernel.org/all/20220825104410.67d4709c@canb.auug.org.au/ https://lore.kernel.org/all/20220823055533.334471-1-saeed@kernel.org/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-25Merge tag 'net-6.0-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from ipsec and netfilter (with one broken Fixes tag). Current release - new code bugs: - dsa: don't dereference NULL extack in dsa_slave_changeupper() - dpaa: fix <1G ethernet on LS1046ARDB - neigh: don't call kfree_skb() under spin_lock_irqsave() Previous releases - regressions: - r8152: fix the RX FIFO settings when suspending - dsa: microchip: keep compatibility with device tree blobs with no phy-mode - Revert "net: macsec: update SCI upon MAC address change." - Revert "xfrm: update SA curlft.use_time", comply with RFC 2367 Previous releases - always broken: - netfilter: conntrack: work around exceeded TCP receive window - ipsec: fix a null pointer dereference of dst->dev on a metadata dst in xfrm_lookup_with_ifid - moxa: get rid of asymmetry in DMA mapping/unmapping - dsa: microchip: make learning configurable and keep it off while standalone - ice: xsk: prohibit usage of non-balanced queue id - rxrpc: fix locking in rxrpc's sendmsg Misc: - another chunk of sysctl data race silencing" * tag 'net-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits) net: lantiq_xrx200: restore buffer if memory allocation failed net: lantiq_xrx200: fix lock under memory pressure net: lantiq_xrx200: confirm skb is allocated before using net: stmmac: work around sporadic tx issue on link-up ionic: VF initial random MAC address if no assigned mac ionic: fix up issues with handling EAGAIN on FW cmds ionic: clear broken state on generation change rxrpc: Fix locking in rxrpc's sendmsg net: ethernet: mtk_eth_soc: fix hw hash reporting for MTK_NETSYS_V2 MAINTAINERS: rectify file entry in BONDING DRIVER i40e: Fix incorrect address type for IPv6 flow rules ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter net: Fix a data-race around sysctl_somaxconn. net: Fix a data-race around netdev_unregister_timeout_secs. net: Fix a data-race around gro_normal_batch. net: Fix data-races around sysctl_devconf_inherit_init_net. net: Fix data-races around sysctl_fb_tunnels_only_for_init_net. net: Fix a data-race around netdev_budget_usecs. net: Fix data-races around sysctl_max_skb_frags. net: Fix a data-race around netdev_budget. ...
2022-08-25selftests/net: fix reinitialization of TEST_PROGS in net self tests.Adel Abouchaev
Assinging will drop all previous tests. Fixes: b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting") Signed-off-by: Adel Abouchaev <adel.abushaev@gmail.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20220824184351.3759862-1-adel.abushaev@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-25selftests/bpf: Add regression test for pruning fixKumar Kartikeya Dwivedi
Add a test to ensure we do mark_chain_precision for the argument type ARG_CONST_ALLOC_SIZE_OR_ZERO. For other argument types, this was already done, but propagation for missing for this case. Without the fix, this test case loads successfully. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20220823185500.467-1-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-25bpftool: Fix a wrong type cast in btf_dumper_intLam Thai
When `data` points to a boolean value, casting it to `int *` is problematic and could lead to a wrong value being passed to `jsonw_bool`. Change the cast to `bool *` instead. Fixes: b12d6ec09730 ("bpf: btf: add btf print functionality") Signed-off-by: Lam Thai <lamthai@arista.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20220824225859.9038-1-lamthai@arista.com
2022-08-25selftests/bpf: add a selftest for cgroup hierarchical stats collectionYosry Ahmed
Add a selftest that tests the whole workflow for collecting, aggregating (flushing), and displaying cgroup hierarchical stats. TL;DR: - Userspace program creates a cgroup hierarchy and induces memcg reclaim in parts of it. - Whenever reclaim happens, vmscan_start and vmscan_end update per-cgroup percpu readings, and tell rstat which (cgroup, cpu) pairs have updates. - When userspace tries to read the stats, vmscan_dump calls rstat to flush the stats, and outputs the stats in text format to userspace (similar to cgroupfs stats). - rstat calls vmscan_flush once for every (cgroup, cpu) pair that has updates, vmscan_flush aggregates cpu readings and propagates updates to parents. - Userspace program makes sure the stats are aggregated and read correctly. Detailed explanation: - The test loads tracing bpf programs, vmscan_start and vmscan_end, to measure the latency of cgroup reclaim. Per-cgroup readings are stored in percpu maps for efficiency. When a cgroup reading is updated on a cpu, cgroup_rstat_updated(cgroup, cpu) is called to add the cgroup to the rstat updated tree on that cpu. - A cgroup_iter program, vmscan_dump, is loaded and pinned to a file, for each cgroup. Reading this file invokes the program, which calls cgroup_rstat_flush(cgroup) to ask rstat to propagate the updates for all cpus and cgroups that have updates in this cgroup's subtree. Afterwards, the stats are exposed to the user. vmscan_dump returns 1 to terminate iteration early, so that we only expose stats for one cgroup per read. - An ftrace program, vmscan_flush, is also loaded and attached to bpf_rstat_flush. When rstat flushing is ongoing, vmscan_flush is invoked once for each (cgroup, cpu) pair that has updates. cgroups are popped from the rstat tree in a bottom-up fashion, so calls will always be made for cgroups that have updates before their parents. The program aggregates percpu readings to a total per-cgroup reading, and also propagates them to the parent cgroup. After rstat flushing is over, all cgroups will have correct updated hierarchical readings (including all cpus and all their descendants). - Finally, the test creates a cgroup hierarchy and induces memcg reclaim in parts of it, and makes sure that the stats collection, aggregation, and reading workflow works as expected. Signed-off-by: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Hao Luo <haoluo@google.com> Link: https://lore.kernel.org/r/20220824233117.1312810-6-haoluo@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-25selftests/bpf: extend cgroup helpersYosry Ahmed
This patch extends bpf selft cgroup_helpers [ID] n various ways: - Add enable_controllers() that allows tests to enable all or a subset of controllers for a specific cgroup. - Add join_cgroup_parent(). The cgroup workdir is based on the pid, therefore a spawned child cannot join the same cgroup hierarchy of the test through join_cgroup(). join_cgroup_parent() is used in child processes to join a cgroup under the parent's workdir. - Add write_cgroup_file() and write_cgroup_file_parent() (similar to join_cgroup_parent() above). - Add get_root_cgroup() for tests that need to do checks on root cgroup. - Distinguish relative and absolute cgroup paths in function arguments. Now relative paths are called relative_path, and absolute paths are called cgroup_path. Signed-off-by: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Hao Luo <haoluo@google.com> Link: https://lore.kernel.org/r/20220824233117.1312810-5-haoluo@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-25selftests/bpf: Test cgroup_iter.Hao Luo
Add a selftest for cgroup_iter. The selftest creates a mini cgroup tree of the following structure: ROOT (working cgroup) | PARENT / \ CHILD1 CHILD2 and tests the following scenarios: - invalid cgroup fd. - pre-order walk over descendants from PARENT. - post-order walk over descendants from PARENT. - walk of ancestors from PARENT. - process only a single object (i.e. PARENT). - early termination. Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Hao Luo <haoluo@google.com> Link: https://lore.kernel.org/r/20220824233117.1312810-3-haoluo@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-25bpf: Introduce cgroup iterHao Luo
Cgroup_iter is a type of bpf_iter. It walks over cgroups in four modes: - walking a cgroup's descendants in pre-order. - walking a cgroup's descendants in post-order. - walking a cgroup's ancestors. - process only the given cgroup. When attaching cgroup_iter, one can set a cgroup to the iter_link created from attaching. This cgroup is passed as a file descriptor or cgroup id and serves as the starting point of the walk. If no cgroup is specified, the starting point will be the root cgroup v2. For walking descendants, one can specify the order: either pre-order or post-order. For walking ancestors, the walk starts at the specified cgroup and ends at the root. One can also terminate the walk early by returning 1 from the iter program. Note that because walking cgroup hierarchy holds cgroup_mutex, the iter program is called with cgroup_mutex held. Currently only one session is supported, which means, depending on the volume of data bpf program intends to send to user space, the number of cgroups that can be walked is limited. For example, given the current buffer size is 8 * PAGE_SIZE, if the program sends 64B data for each cgroup, assuming PAGE_SIZE is 4kb, the total number of cgroups that can be walked is 512. This is a limitation of cgroup_iter. If the output data is larger than the kernel buffer size, after all data in the kernel buffer is consumed by user space, the subsequent read() syscall will signal EOPNOTSUPP. In order to work around, the user may have to update their program to reduce the volume of data sent to output. For example, skip some uninteresting cgroups. In future, we may extend bpf_iter flags to allow customizing buffer size. Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Hao Luo <haoluo@google.com> Link: https://lore.kernel.org/r/20220824233117.1312810-2-haoluo@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-25x86/sev: Mark snp_abort() noreturnBorislav Petkov
Mark both the function prototype and definition as noreturn in order to prevent the compiler from doing transformations which confuse objtool like so: vmlinux.o: warning: objtool: sme_enable+0x71: unreachable instruction This triggers with gcc-12. Add it and sev_es_terminate() to the objtool noreturn tracking array too. Sort it while at it. Suggested-by: Michael Matz <matz@suse.de> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220824152420.20547-1-bp@alien8.de
2022-08-24selftests/net: Add sk_bind_sendto_listen and sk_connect_zero_addrJoanne Koong
This patch adds 2 new tests: sk_bind_sendto_listen and sk_connect_zero_addr. The sk_bind_sendto_listen test exercises the path where a socket's rcv saddr changes after it has been added to the binding tables, and then a listen() on the socket is invoked. The listen() should succeed. The sk_bind_sendto_listen test is copied over from one of syzbot's tests: https://syzkaller.appspot.com/x/repro.c?x=1673a38df00000 The sk_connect_zero_addr test exercises the path where the socket was never previously added to the binding tables and it gets assigned a saddr upon a connect() to address 0. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-24selftests/net: Add test for timing a bind request to a port with a populated ↵Joanne Koong
bhash entry This test populates the bhash table for a given port with MAX_THREADS * MAX_CONNECTIONS sockets, and then times how long a bind request on the port takes. When populating the bhash table, we create the sockets and then bind the sockets to the same address and port (SO_REUSEADDR and SO_REUSEPORT are set). When timing how long a bind on the port takes, we bind on a different address without SO_REUSEPORT set. We do not set SO_REUSEPORT because we are interested in the case where the bind request does not go through the tb->fastreuseport path, which is fragile (eg tb->fastreuseport path does not work if binding with a different uid). To run the script: Usage: ./bind_bhash.sh [-6 | -4] [-p port] [-a address] 6: use ipv6 4: use ipv4 port: Port number address: ip address Without any arguments, ./bind_bhash.sh defaults to ipv6 using ip address "2001:0db8:0:f101::1" on port 443. On my local machine, I see: ipv4: before - 0.002317 seconds with bhash2 - 0.000020 seconds ipv6: before - 0.002431 seconds with bhash2 - 0.000021 seconds Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-24selftests/bpf: Fix wrong size passed to bpf_setsockopt()Yang Yingliang
sizeof(new_cc) is not real memory size that new_cc points to; introduce a new_cc_len to store the size and then pass it to bpf_setsockopt(). Fixes: 31123c0360e0 ("selftests/bpf: bpf_setsockopt tests") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220824013907.380448-1-yangyingliang@huawei.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-24selftests/bpf: Add cb_refs test to s390x deny listDaniel Müller
The cb_refs BPF selftest is failing execution on s390x machines. This is a newly added test that requires a feature not presently supported on this architecture. Denylist the test for this architecture. Fixes: 3cf7e7d8685c ("selftests/bpf: Add tests for reference state fixes for callbacks") Signed-off-by: Daniel Müller <deso@posteo.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220824163906.1186832-1-deso@posteo.net Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-24selftests/bpf: Add tests for reference state fixes for callbacksKumar Kartikeya Dwivedi
These are regression tests to ensure we don't end up in invalid runtime state for helpers that execute callbacks multiple times. It exercises the fixes to verifier callback handling for reference state in previous patches. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20220823013226.24988-1-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 01:14:22 +0000