| Age | Commit message (Collapse) | Author |
|---|
|
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
This will cause this selftest to fail spuriously. The swp enslavement to
the 802.1ad bridge is not allowed, because RIFs are not allowed to be
created for 802.1ad bridges, but the address indicates one needs to be
created.
Fix by disabling automatic IPv6 address generation for the HW-offloaded
bridge in this selftest, thus exempting it from mlxsw router attention.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-06-21
We've added 7 non-merge commits during the last 14 day(s) which contain
a total of 7 files changed, 181 insertions(+), 15 deletions(-).
The main changes are:
1) Fix a verifier id tracking issue with scalars upon spill,
from Maxim Mikityanskiy.
2) Fix NULL dereference if an exception is generated while a BPF
subprogram is running, from Krister Johansen.
3) Fix a BTF verification failure when compiling kernel with LLVM_IAS=0,
from Florent Revest.
4) Fix expected_attach_type enforcement for kprobe_multi link,
from Jiri Olsa.
5) Fix a bpf_jit_dump issue for x86_64 to pick the correct JITed image,
from Yonghong Song.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Force kprobe multi expected_attach_type for kprobe_multi link
bpf/btf: Accept function names that contain dots
selftests/bpf: add a test for subprogram extables
bpf: ensure main program has an extable
bpf: Fix a bpf_jit_dump issue for x86_64 with sysctl bpf_jit_enable.
selftests/bpf: Add test cases to assert proper ID tracking on spill
bpf: Fix verifier id tracking of scalars on spill
====================
Link: https://lore.kernel.org/r/20230621101116.16122-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The arm64 documentation has moved under Documentation/arch/. Fix up a
dangling reference to match.
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
If we get an unexpected signal during a signal test log a bit more data to
aid diagnostics.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230620-arm64-selftest-log-wrong-signal-v1-1-3fe29bdaaf38@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Fixes an issue where an incorrect filename was added in the DWARF line table of
an ELF object file when calling 'perf inject --jit' due to not checking the
filename of a debug entry against the repeated name marker (/xff/0).
The marker is mentioned in the tools/perf/util/jitdump.h header, which describes
the jitdump binary format, and indicitates that the filename in a debug entry
is the same as the previous enrty.
In the function emit_lineno_info(), in the file tools/perf/util/genelf-debug.c,
the debug entry filename gets compared to the previous entry filename. If they
are not the same, a new filename is added to the DWARF line table. However,
since there is no check against '\xff\0', in some cases '\xff\0' is inserted
as the filename into the DWARF line table.
This can be seen with `objdump --dwarf=line` on the ELF file after `perf inject --jit`.
It also makes no source code information show up in 'perf annotate'.
Signed-off-by: Elisabeth Panholzer <elisabeth@leaningtech.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20230602123815.255001-1-paniii94@gmail.com
[ Fixed a trailing white space, removed a subject prefix ]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
In the perf annotate view for LoongArch, there is no arrowed line
pointing to the target from the branch instruction. This issue is
caused by incorrect instruction association and parsing.
$ perf record alloc-6276705c94ad1398 # rust benchmark
$ perf report
0.28 │ ori $a1, $zero, 0x63
│ move $a2, $zero
10.55 │ addi.d $a3, $a2, 1(0x1)
│ sltu $a4, $a3, $s7
9.53 │ masknez $a4, $s7, $a4
│ sub.d $a3, $a3, $a4
12.12 │ st.d $a1, $fp, 24(0x18)
│ st.d $a3, $fp, 16(0x10)
16.29 │ slli.d $a2, $a2, 0x2
│ ldx.w $a2, $s8, $a2
12.77 │ st.w $a2, $sp, 724(0x2d4)
│ st.w $s0, $sp, 720(0x2d0)
7.03 │ addi.d $a2, $sp, 720(0x2d0)
│ addi.d $a1, $a1, -1(0xfff)
12.03 │ move $a2, $a3
│ → bne $a1, $s3, -52(0x3ffcc) # 82ce8 <test::bench::Bencher::iter+0x3f4>
2.50 │ addi.d $a0, $a0, 1(0x1)
This patch fixes instruction association issues, such as associating
branch instructions with jump_ops instead of call_ops, and corrects
false instruction matches. It also implements branch instruction parsing
specifically for LoongArch. With this patch, we will be able to see the
arrowed line.
0.79 │3ec: ori $a1, $zero, 0x63
│ move $a2, $zero
10.32 │3f4:┌─→addi.d $a3, $a2, 1(0x1)
│ │ sltu $a4, $a3, $s7
10.44 │ │ masknez $a4, $s7, $a4
│ │ sub.d $a3, $a3, $a4
14.17 │ │ st.d $a1, $fp, 24(0x18)
│ │ st.d $a3, $fp, 16(0x10)
13.15 │ │ slli.d $a2, $a2, 0x2
│ │ ldx.w $a2, $s8, $a2
11.00 │ │ st.w $a2, $sp, 724(0x2d4)
│ │ st.w $s0, $sp, 720(0x2d0)
8.00 │ │ addi.d $a2, $sp, 720(0x2d0)
│ │ addi.d $a1, $a1, -1(0xfff)
11.99 │ │ move $a2, $a3
│ └──bne $a1, $s3, 3f4
3.17 │ addi.d $a0, $a0, 1(0x1)
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: loongarch@lists.linux.dev
Cc: loongson-kernel@lists.loongnix.cn
Cc: Huacai Chen <chenhuacai@loongson.cn>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: WANG Xuerui <kernel@xen0n.name>
Link: https://lore.kernel.org/r/20230620132025.105563-1-wangrui@loongson.cn
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"19 hotfixes. 8 of these are cc:stable.
This includes a wholesale reversion of the post-6.4 series 'make slab
shrink lockless'. After input from Dave Chinner it has been decided
that we should go a different way [1]"
Link: https://lkml.kernel.org/r/ZH6K0McWBeCjaf16@dread.disaster.area [1]
* tag 'mm-hotfixes-stable-2023-06-20-12-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
selftests/mm: fix cross compilation with LLVM
mailmap: add entries for Ben Dooks
nilfs2: prevent general protection fault in nilfs_clear_dirty_page()
Revert "mm: vmscan: make global slab shrink lockless"
Revert "mm: vmscan: make memcg slab shrink lockless"
Revert "mm: vmscan: add shrinker_srcu_generation"
Revert "mm: shrinkers: make count and scan in shrinker debugfs lockless"
Revert "mm: vmscan: hold write lock to reparent shrinker nr_deferred"
Revert "mm: vmscan: remove shrinker_rwsem from synchronize_shrinkers()"
Revert "mm: shrinkers: convert shrinker_rwsem to mutex"
nilfs2: fix buffer corruption due to concurrent device reads
scripts/gdb: fix SB_* constants parsing
scripts: fix the gfp flags header path in gfp-translate
udmabuf: revert 'Add support for mapping hugepages (v4)'
mm/khugepaged: fix iteration in collapse_file
memfd: check for non-NULL file_seals in memfd_create() syscall
mm/vmalloc: do not output a spurious warning when huge vmalloc() fails
mm/mprotect: fix do_mprotect_pkey() limit check
writeback: fix dereferencing NULL mapping->host on writeback_page_template
|
|
Remove the "struct mutex lock" variable from annotation that is
allocated per symbol. This removes in the region of 40 bytes per
symbol allocation. Use a sharded mutex where the number of shards is
set to the number of CPUs. Assuming good hashing of the annotation
(done based on the pointer), this means in order to contend there
needs to be more threads than CPUs, which is not currently true in any
perf command. Were contention an issue it is straightforward to
increase the number of shards in the mutex.
On my Debian/glibc based machine, this reduces the size of struct
annotation from 136 bytes to 96 bytes, or nearly 30%.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andres Freund <andres@anarazel.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Yuan Can <yuancan@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/r/20230615040715.2064350-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Per object mutexes may come with significant memory cost while a
global mutex can suffer from unnecessary contention. A sharded mutex
is a compromise where objects are hashed and then a particular mutex
for the hash of the object used. Contention can be controlled by the
number of shards.
v2. Use hashmap.h's hash_bits in case of contention from alignment of
objects.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andres Freund <andres@anarazel.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Yuan Can <yuancan@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/r/20230615040715.2064350-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
What we need to calculate is the size of the object, not the size of the
pointer.
Fixed: 51cfe7a3e87e ("perf python: Avoid 2 leak sanitizer issues")
Signed-off-by: Li Dong <lidong@vivo.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: opensource.kernel@vivo.com
Link: https://lore.kernel.org/r/20230619082036.410-1-lidong@vivo.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The malloc() function may return NULL when it fails,
which may cause null pointer deference in add_cmdname(),
add Null check for return value of malloc().
Found by our static analysis tool.
Signed-off-by: Chenyuan Mi <cymi20@fudan.edu.cn>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20230614150118.115208-1-cymi20@fudan.edu.cn
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
./tools/perf/util/parse-events.c:1466:2-3: Unneeded semicolon
Signed-off-by: Mingtong Bao <baomingtong001@208suo.com>
Link: https://lore.kernel.org/r/2c733a91717eae93119ba2226420fd8f@208suo.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
evsel__compute_group_pmu_name()
The newline is missing for pr_debug message in
evsel__compute_group_pmu_name(), fix it.
Before:
# perf --debug verbose=2 record -e cpu-clock true
<SNIP>
No PMU found for 'cycles:u'No PMU found for 'instructions:u'------------------------------------------------------------
perf_event_attr:
type 1
size 136
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|PERIOD
read_format ID|LOST
disabled 1
inherit 1
mmap 1
comm 1
freq 1
enable_on_exec 1
task 1
sample_id_all 1
exclude_guest 1
mmap2 1
comm_exec 1
ksymbol 1
bpf_event 1
------------------------------------------------------------
<SNIP>
After:
# perf --debug verbose=2 record -e cpu-clock true
<SNIP>
No PMU found for 'cycles:u'
No PMU found for 'instructions:u'
------------------------------------------------------------
perf_event_attr:
type 1
size 136
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|PERIOD
read_format ID|LOST
disabled 1
inherit 1
mmap 1
comm 1
freq 1
enable_on_exec 1
task 1
sample_id_all 1
exclude_guest 1
mmap2 1
comm_exec 1
ksymbol 1
bpf_event 1
------------------------------------------------------------
<SNIP>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: mark.rutland@arm.com
Cc: irogers@google.com
Cc: peterz@infradead.org
Cc: adrian.hunter@intel.com
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Cc: alexander.shishkin@linux.intel.com
Cc: kan.liang@linux.intel.com
Cc: mingo@redhat.com
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20230616024515.80814-1-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The newline is missing for error messages in add_default_attributes()
Before:
# perf stat --topdown
Topdown requested but the topdown metric groups aren't present.
(See perf list the metric groups have names like TopdownL1)#
After:
# perf stat --topdown
Topdown requested but the topdown metric groups aren't present.
(See perf list the metric groups have names like TopdownL1)
#
In addition, perf_stat_init_aggr_mode() and perf_stat_init_aggr_mode_file()
have the same problem, fixed by the way.
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20230614021505.59856-1-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add a test case for the funcgraph-retval and funcgraph-retval-hex
trace options.
Link: https://lkml.kernel.org/r/9fedbd25e63f012cade5dad13be21225fec2fb5d.1680954589.git.pengdonglin@sangfor.com.cn
Signed-off-by: Donglin Peng <pengdonglin@sangfor.com.cn>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix MAINTAINERS file to point to proper mailing list for rtla and rv
The mailing list pointed to linux-trace-devel instead of
linux-trace-kernel. The former is for the tracing libraries and the
latter is for anything in the Linux kernel tree. The wrong mailing
list was used because linux-trace-kernel did not exist when rtla and
rv were created.
- User events:
- Fix matching of dynamic events to their user events
When user writes to dynamic_events file, a lookup of the
registered dynamic events is made, but there were some cases that
a match could be incorrectly made.
- Add auto cleanup of user events
Have the user events automatically get removed when the last
reference (file descriptor) is closed. This was asked for to
prevent leaks of user events hanging around needing admins to
clean them up.
- Add persistent logic (but not let user space use it yet)
In some cases, having a persistent user event (one that does not
get cleaned up automatically) is useful. But there's still debates
about how to expose this to user space. The infrastructure is
added, but the API is not.
- Update the selftests
Update the user event selftests to reflect the above changes"
* tag 'trace-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/user_events: Document auto-cleanup and remove dyn_event refs
selftests/user_events: Adapt dyn_test to non-persist events
selftests/user_events: Ensure auto cleanup works as expected
tracing/user_events: Add auto cleanup and future persist flag
tracing/user_events: Track refcount consistently via put/get
tracing/user_events: Store register flags on events
tracing/user_events: Remove user_ns walk for groups
selftests/user_events: Add perf self-test for empty arguments events
selftests/user_events: Clear the events after perf self-test
selftests/user_events: Add ftrace self-test for empty arguments events
tracing/user_events: Fix the incorrect trace record for empty arguments events
tracing: Modify print_fields() for fields output order
tracing/user_events: Handle matching arguments that is null from dyn_events
tracing/user_events: Prevent same name but different args event
tracing/rv/rtla: Update MAINTAINERS file to point to proper mailing list
|
|
Enables advertisement of the maximum offset supported by the phase control
functionality of PHCs. The callback is used to return an error if an offset
not supported by the PHC is used in ADJ_OFFSET. The ioctls
PTP_CLOCK_GETCAPS and PTP_CLOCK_GETCAPS2 now advertise the maximum offset a
PHC's phase control functionality is capable of supporting. Introduce new
sysfs node, max_phase_adjustment.
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Maciek Machnikowski <maciek@machnikowski.net>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Invoke clock_adjtime syscall with tx.modes set with ADJ_OFFSET when testptp
is invoked with a phase adjustment offset value. Support seconds and
nanoseconds for the offset value.
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Maciek Machnikowski <maciek@machnikowski.net>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use existing NSEC_PER_SEC declaration in place of hardcoded magic numbers.
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Maciek Machnikowski <maciek@machnikowski.net>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove all defines which aren't needed after correctly including the
kernel header files.
Link: https://lkml.kernel.org/r/20230612095347.996335-2-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stefan Roesch <shr@devkernel.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It is wrong to include unprocessed user header files directly. They are
processed to "<source_tree>/usr/include" by running "make headers" and
they are included in selftests by kselftest makefiles automatically with
help of KHDR_INCLUDES variable. These headers should always bulilt first
before building kselftests.
Link: https://lkml.kernel.org/r/20230612095347.996335-1-usama.anjum@collabora.com
Fixes: 07115fcc15b4 ("selftests/mm: add new selftests for KSM")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stefan Roesch <shr@devkernel.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Building and running the subsuite 'damon' of kselftest, shows the
following issues:
selftests: damon: debugfs_attrs.sh
/sys/kernel/debug/damon not found
By creating a config file enabling DAMON fragments in the
selftests/damon/ directory the tests pass.
Link: https://lkml.kernel.org/r/20230412092854.3306197-1-anders.roxell@linaro.org
Fixes: b348eb7abd09 ("mm/damon: add user space selftests")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As per a discussion with Muhammad Usama Anjum [1], the following is how
one is supposed to build selftests:
make headers && make -C tools/testing/selftests/mm
Change the selftest build system's lib.mk to fail out with a helpful
message if that prerequisite "make headers" has not been done yet.
[1] https://lore.kernel.org/all/bf910fa5-0c96-3707-cce4-5bcc656b6274@collabora.com/
[jhubbard@nvidia.com: abort the make process the first time headers aren't detected]
Link: https://lkml.kernel.org/r/14573e7e-f2ad-ff34-dfbd-3efdebee51ed@nvidia.com
[anders.roxell@linaro.org: fix out-of-tree builds]
Link: https://lkml.kernel.org/r/20230613074931.666966-1-anders.roxell@linaro.org
Link: https://lkml.kernel.org/r/20230606071637.267103-12-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are only three uffd*() routines that are used outside of the uffd
selftests. Leave these in vm_util.c, where they are available to any mm
selftest program:
uffd_register()
uffd_unregister()
uffd_register_with_ioctls().
A few other uffd*() routines, however, are only used by the uffd-focused
tests found in uffd-stress.c and uffd-unit-tests.c. Move those routines
into uffd-common.c.
Link: https://lkml.kernel.org/r/20230606071637.267103-10-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
MADV_PAGEOUT, MADV_POPULATE_READ, MADV_COLLAPSE are conditionally
defined as necessary. However, that was being done in .c files, and a
new build failure came up that would have been automatically avoided had
these been in a common header file.
So consolidate and move them all to vm_util.h, which fixes the build
failure.
An alternative approach from Muhammad Usama Anjum was: rely on "make
headers" being required, and include asm-generic/mman-common.h. This
works in the sense that it builds, but it still generates warnings about
duplicate MADV_* symbols, and the goal here is to get a fully clean (no
warnings) build here.
Link: https://lkml.kernel.org/r/20230606071637.267103-9-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This fixes a real bug, too, because xstate_size() was assuming that
the stack variable xstate_size was initialized to zero. That's not
guaranteed nor even especially likely.
Link: https://lkml.kernel.org/r/20230606071637.267103-8-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The uffd tests generate two compile time warnings from clang's
-Wformat-security setting. These trigger at the call sites for
uffd_test_start() and uffd_test_skip().
1) Fix the uffd_test_start() issue by removing the intermediate
test_name variable (thanks to David Hildenbrand for showing how to do
this).
2) Fix the uffd_test_skip() issue by observing that there is no need for
a macro and a variable args approach, because all callers of
uffd_test_skip() pass in a simple char* string, without any format
specifiers. So just change uffd_test_skip() into a regular C function.
Link: https://lkml.kernel.org/r/20230606071637.267103-7-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
These new build products were left out of .gitignore, so add them now.
Link: https://lkml.kernel.org/r/20230606071637.267103-6-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We cannot depend upon git to reliably retain the executable bit on shell
scripts, or so I was told several years ago while working on this same
run_vmtests.sh script. And sure enough, things such as test_hmm.sh are
lately failing to run, due to lacking execute permissions.
Fix this by explicitly adding "bash" to each of the shell script
invocations. Leave fixing the overall approach to another day.
Link: https://lkml.kernel.org/r/20230606071637.267103-5-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
mlock2-tests.c
The stop variable is a char*, and the code was assigning a char value to
it. This was generating a warning when compiling with clang.
However, as both David and Peter pointed out, stop is not even used
after the problematic assignment to a char type. So just delete that
line entirely.
Link: https://lkml.kernel.org/r/20230606071637.267103-4-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Dummy variables are required in order to make these two (similar)
routines work, so in both cases, declare the variables as volatile in
order to avoid the clang compiler warning.
Furthermore, in order to ensure that each test actually does what is
intended, add an asm volatile invocation (thanks to David Hildenbrand
for the suggestion), with a clarifying comment so that it survives
future maintenance.
Link: https://lkml.kernel.org/r/20230606071637.267103-3-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "A minor flurry of selftest/mm fixes", v3.
A series that fixes up build errors and warnings for at least the 64-bit
builds on x86 with clang.
The series also includes an optional "improvement" of moving some uffd
code into uffd-common.[ch], which is proving to be somewhat controversial,
and so if that doesn't get resolved, then patches 9 and 10 may just get
dropped. They are not required in order to get a clean build, now that
"make headers" is happening.
[1]: https://lore.kernel.org/all/20230602013358.900637-1-jhubbard@nvidia.com/
This patch (of 11):
uffd_minor_feature() was unused. Remove it in order to fix the associated
clang build warning.
Link: https://lkml.kernel.org/r/20230606071637.267103-1-jhubbard@nvidia.com
Link: https://lkml.kernel.org/r/20230606071637.267103-2-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Considering that only bench_ringbufs.c supports consumer, just set the
default value of consumer_cnt as 0. After that, update the validity
check of consumer_cnt, remove unused consumer_thread code snippets and
set consumer_cnt as 1 in run_bench_ringbufs.sh accordingly.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20230613080921.1623219-5-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When using option -a without --prod-affinity or --cons-affinity, if the
number of producers and consumers is greater than the number of online
CPUs, the benchmark will fail to run as shown below:
$ getconf _NPROCESSORS_ONLN
8
$ ./bench bpf-loop -a -p9
Setting up benchmark 'bpf-loop'...
setting affinity to CPU #8 failed: -22
Fix it by returning the remainder of next_cpu divided by the number of
online CPUs in next_cpu().
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20230613080921.1623219-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The return value of pthread API is the error code when the called
API fails, so output the return value instead of errno.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20230613080921.1623219-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
For count-local benchmark, use producer_cnt instead of consumer_cnt when
allocating local counter array.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20230613080921.1623219-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently the MM selftests attempt to work out the target architecture by
using CROSS_COMPILE or otherwise querying the host machine, storing the
target architecture in a variable called MACHINE rather than the usual
ARCH though as far as I can tell (including for x86_64) the value is the
same as we would use for architecture.
When cross compiling with LLVM we don't need a CROSS_COMPILE as LLVM can
support many target architectures in a single build so this logic does not
work, CROSS_COMPILE is not set and we end up selecting tests for the host
rather than target architecture. Fix this by using the more standard ARCH
to describe the architecture, taking it from the environment if specified.
Link: https://lkml.kernel.org/r/20230614-kselftest-mm-llvm-v1-1-180523f277d3@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This allows to do more centralized decisions later on, and generally
makes it very explicit which maps are privileged and which are not
(e.g., LRU_HASH and LRU_PERCPU_HASH, which are privileged HASH variants,
as opposed to unprivileged HASH and HASH_PERCPU; now this is explicit
and easy to verify).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230613223533.3689589-4-andrii@kernel.org
|
|
Assertions reports are split into two parts, the exact file and location
of the condition and then the stack trace printed from
btrfs_assertfail(). This means all the stack traces report the same line
and this is what's typically reported by various tools, making it harder
to distinguish the reports.
[403.2467] assertion failed: refcount_read(&block_group->refs) == 1, in fs/btrfs/block-group.c:4259
[403.2479] ------------[ cut here ]------------
[403.2484] kernel BUG at fs/btrfs/messages.c:259!
[403.2488] invalid opcode: 0000 [#1] PREEMPT SMP KASAN
[403.2493] CPU: 2 PID: 23202 Comm: umount Not tainted 6.2.0-rc4-default+ #67
[403.2499] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552-rebuilt.opensuse.org 04/01/2014
[403.2509] RIP: 0010:btrfs_assertfail+0x19/0x1b [btrfs]
...
[403.2595] Call Trace:
[403.2598] <TASK>
[403.2601] btrfs_free_block_groups.cold+0x52/0xae [btrfs]
[403.2608] close_ctree+0x6c2/0x761 [btrfs]
[403.2613] ? __wait_for_common+0x2b8/0x360
[403.2618] ? btrfs_cleanup_one_transaction.cold+0x7a/0x7a [btrfs]
[403.2626] ? mark_held_locks+0x6b/0x90
[403.2630] ? lockdep_hardirqs_on_prepare+0x13d/0x200
[403.2636] ? __call_rcu_common.constprop.0+0x1ea/0x3d0
[403.2642] ? trace_hardirqs_on+0x2d/0x110
[403.2646] ? __call_rcu_common.constprop.0+0x1ea/0x3d0
[403.2652] generic_shutdown_super+0xb0/0x1c0
[403.2657] kill_anon_super+0x1e/0x40
[403.2662] btrfs_kill_super+0x25/0x30 [btrfs]
[403.2668] deactivate_locked_super+0x4c/0xc0
By making btrfs_assertfail a macro we'll get the same line number for
the BUG output:
[63.5736] assertion failed: 0, in fs/btrfs/super.c:1572
[63.5758] ------------[ cut here ]------------
[63.5782] kernel BUG at fs/btrfs/super.c:1572!
[63.5807] invalid opcode: 0000 [#2] PREEMPT SMP KASAN
[63.5831] CPU: 0 PID: 859 Comm: mount Tainted: G D 6.3.0-rc7-default+ #2062
[63.5868] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.org 04/01/2014
[63.5905] RIP: 0010:btrfs_mount+0x24/0x30 [btrfs]
[63.5964] RSP: 0018:ffff88800e69fcd8 EFLAGS: 00010246
[63.5982] RAX: 000000000000002d RBX: ffff888008fc1400 RCX: 0000000000000000
[63.6004] RDX: 0000000000000000 RSI: ffffffffb90fd868 RDI: ffffffffbcc3ff20
[63.6026] RBP: ffffffffc081b200 R08: 0000000000000001 R09: ffff88800e69fa27
[63.6046] R10: ffffed1001cd3f44 R11: 0000000000000001 R12: ffff888005a3c370
[63.6062] R13: ffffffffc058e830 R14: 0000000000000000 R15: 00000000ffffffff
[63.6081] FS: 00007f7b3561f800(0000) GS:ffff88806c600000(0000) knlGS:0000000000000000
[63.6105] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[63.6120] CR2: 00007fff83726e10 CR3: 0000000002a9e000 CR4: 00000000000006b0
[63.6137] Call Trace:
[63.6143] <TASK>
[63.6148] legacy_get_tree+0x80/0xd0
[63.6158] vfs_get_tree+0x43/0x120
[63.6166] do_new_mount+0x1f3/0x3d0
[63.6176] ? do_add_mount+0x140/0x140
[63.6187] ? cap_capable+0xa4/0xe0
[63.6197] path_mount+0x223/0xc10
This comes at a cost of bloating the final btrfs.ko module due all the
inlining, as long as assertions are compiled in. This is a must for
debugging builds but this is often enabled on release builds too.
Release build:
text data bss dec hex filename
1251676 20317 16088 1288081 13a791 pre/btrfs.ko
1260612 29473 16088 1306173 13ee3d post/btrfs.ko
DELTA: +8936
CC: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add a utility 'lsdexcr' to print the current DEXCR status. Useful for
quickly checking the status such as when debugging test failures or
verifying the new default DEXCR does what you want (for userspace at
least). Example output:
# ./lsdexcr
uDEXCR: 04000000 (NPHIE)
HDEXCR: 00000000
Effective: 04000000 (NPHIE)
SBHE (0): clear (Speculative branch hint enable)
IBRTPD (3): clear (Indirect branch recurrent target ...)
SRAPD (4): clear (Subroutine return address ...)
NPHIE * (5): set (Non-privileged hash instruction enable)
PHIE (6): clear (Privileged hash instruction enable)
DEXCR[NPHIE] enabled: hashst/hashchk working
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230616034846.311705-12-bgray@linux.ibm.com
|
|
Test the kernel DEXCR[NPHIE] interface and hashchk exception handling.
Introduces with it a DEXCR utils library for common DEXCR operations.
Volatile is used to prevent the compiler optimising away the signal
tests.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230616034846.311705-11-bgray@linux.ibm.com
|
|
Adds _MSG assertion variants to provide more context behind why a
failure occurred. Also include unistd.h for _exit() and stdio.h for
fprintf(), and move ARRAY_SIZE macro to utils.h.
The _MSG variants and ARRAY_SIZE will be used by the following
DEXCR selftests.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230616034846.311705-10-bgray@linux.ibm.com
|
|
Test that target gets created by register_sysctl_mount_point and that no
additional target can be created "on top" of a permanently empty sysctl
table.
Create a mount point target (mnt) in the sysctl test driver; try to
create another on top of that (mnt_error). Output an error if
"mnt_error" is present when we run the sysctl selftests.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Tests were being skipped because the target was not present. Add a flag
that controls whether to skip a test based on the presence of the target.
Actually skip tests in the test_case function with a "return" instead of
a "continue".
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Add a test that checks that the unregistered directory is removed from
/proc/sys/debug
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
The functions get_test_{count,enabled,target} use awk to get the N'th
field in the ALL_TESTS variable. A variable with leading zeros (e.g.
0009) is misinterpreted as an entire line instead of the N'th field.
Remove the leading zeros so this does not happen. We can now use the
helper in tests 6, 7 and 8.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
In some architectures we can't encode the PMU number in
perf_event_attr.type and thus can't just ask for the same event in
multiple CPUs (and thus PMUs), that is what we want in hybrid systems
but we can't when that encoding isn't understood by the kernel, such as
in ARM64's big.LITTLE.
If that is the case, fallback to the previous behaviour till we find a
better solution to have consistent output accross architectures with
hybrid CPU configurations.
Co-developed-with: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/linux-perf-users/ZIzYgImv61OGK1wA@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Will be used when checking if we can encode the PMU number in
perf_event_attr.type, part of the logic to use in hybrid systems
(multiple types of CPUs, such as Intel's (Alder Lake, etc) or ARM's
big.LITTLE).
Co-developed-with: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/linux-perf-users/ZIzYgImv61OGK1wA@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
obsolescent "fgrep"
There exists the following warning when executing 'perf test record+probe_libc_inet_pton.sh':
fgrep: warning: fgrep is obsolescent; using grep -F
This is tested on Fedora 38, the version of grep is 3.8, the latest
version of grep claims the fgrep is obsolete, use "grep -F" instead of
"fgrep" to silence the warning.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: loongson-kernel@lists.loongnix.cn
Link: https://lore.kernel.org/r/1686880567-30017-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Scanning only core PMUs is not sufficient on platforms like AMD since
perf mem on AMD uses IBS OP PMU, which is independent of core PMU.
Scan all PMUs instead of just core PMUs. There should be negligible
performance overhead because of scanning all PMUs, so we should be okay.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20230615051700.1833-4-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
