| Age | Commit message (Collapse) | Author |
|---|
|
This patch continues the migration and removal process for cgroup
sock_create tests to selftests.
The test being migrated verifies the ability of cgroup BPF to block the
creation of specific types of sockets using a verdict. Specifically, the
test denies socket creation when the socket is of type AF_INET{6},
SOCK_DGRAM, and IPPROTO_ICMP{V6}. If the requested socket type matches
these attributes, the cgroup BPF verdict blocks the socket creation.
As with the previous commit, this test currently lacks coverage in
selftests, so this patch migrates the functionality into the sock_create
tests under selftests. This migration ensures that the socket creation
blocking behavior with cgroup bpf program is properly tested within the
selftest framework.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20241011044847.51584-3-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch migrates the old test for cgroup BPF that sets
sk_bound_dev_if, mark, and priority when AF_INET{6} sockets are created.
The most closely related tests under selftests are 'test_sock' and
'sockopt'. However, these existing tests serve different purposes.
'test_sock' focuses mainly on verifying the socket binding process,
while 'sockopt' concentrates on testing the behavior of getsockopt and
setsockopt operations for various socket options.
Neither of these existing tests directly covers the ability of cgroup
BPF to set socket attributes such as sk_bound_dev_if, mark, and priority
during socket creation. To address this gap, this patch introduces a
migration of the old cgroup socket attribute test, now included as the
'sock_create' test in selftests/bpf. This ensures that the ability to
configure these attributes during socket creation is properly tested.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20241011044847.51584-2-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Removed unnecessary `fd = -1` assignments after closing file descriptors.
because it will be assigned by the function bpf_prog_load().This improves
code readability and removes redundant operations.
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241010055737.4292-1-zhujun2@cmss.chinamobile.com
|
|
The documentation says CONFIG_FUNCTION_ERROR_INJECTION is supported only
on x86. This was presumably true at the time of writing, but it's now
supported on many other architectures too. Drop this statement, since
it's not correct anymore and it fits better in other documentation
anyway.
Signed-off-by: Martin Kelly <martin.kelly@crowdstrike.com>
Link: https://lore.kernel.org/r/20241010193301.995909-1-martin.kelly@crowdstrike.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The `index` argument to bpf_loop() is threaded as an u64.
This lead in a subtle verifier denial where clang cloned the argument
in another register[1].
[1] https://github.com/systemd/systemd/pull/34650#issuecomment-2401092895
Signed-off-by: Matteo Croce <teknoraver@meta.com>
Link: https://lore.kernel.org/r/20241010035652.17830-1-technoboy85@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
sym_is_subprog() is incorrectly rejecting relocations against *weak*
global subprogs. Fix that by realizing that STB_WEAK is also a global
function.
While it seems like verifier doesn't support taking an address of
non-static subprog right now, it's still best to fix support for it on
libbpf side, otherwise users will get a very confusing error during BPF
skeleton generation or static linking due to misinterpreted relocation:
libbpf: prog 'handle_tp': bad map relo against 'foo' in section '.text'
Error: failed to open BPF object file: Relocation failed
It's clearly not a map relocation, but is treated and reported as such
without this fix.
Fixes: 53eddb5e04ac ("libbpf: Support subprog address relocation")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241009011554.880168-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
test_progs uses glibc specific functions backtrace() and
backtrace_symbols_fd() to print backtrace in case of SIGSEGV.
Recent commit (see fixes) updated test_progs.c to define stub versions
of the same functions with attriubte "weak" in order to allow linking
test_progs against musl libc. Unfortunately this broke the backtrace
handling for glibc builds.
As it turns out, glibc defines backtrace() and backtrace_symbols_fd()
as weak:
$ llvm-readelf --symbols /lib64/libc.so.6 \
| grep -P '( backtrace_symbols_fd| backtrace)$'
4910: 0000000000126b40 161 FUNC WEAK DEFAULT 16 backtrace
6843: 0000000000126f90 852 FUNC WEAK DEFAULT 16 backtrace_symbols_fd
So does test_progs:
$ llvm-readelf --symbols test_progs \
| grep -P '( backtrace_symbols_fd| backtrace)$'
2891: 00000000006ad190 15 FUNC WEAK DEFAULT 13 backtrace
11215: 00000000006ad1a0 41 FUNC WEAK DEFAULT 13 backtrace_symbols_fd
In such situation dynamic linker is not obliged to favour glibc
implementation over the one defined in test_progs.
Compiling with the following simple modification to test_progs.c
demonstrates the issue:
$ git diff
...
\--- a/tools/testing/selftests/bpf/test_progs.c
\+++ b/tools/testing/selftests/bpf/test_progs.c
\@@ -1817,6 +1817,7 @@ int main(int argc, char **argv)
if (err)
return err;
+ *(int *)0xdeadbeef = 42;
err = cd_flavor_subdir(argv[0]);
if (err)
return err;
$ ./test_progs
[0]: Caught signal #11!
Stack trace:
<backtrace not supported>
Segmentation fault (core dumped)
Resolve this by hiding stub definitions behind __GLIBC__ macro check
instead of using "weak" attribute.
Fixes: c9a83e76b5a9 ("selftests/bpf: Fix compile if backtrace support missing in libc")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Tony Ambardar <tony.ambardar@gmail.com>
Reviewed-by: Tony Ambardar <tony.ambardar@gmail.com>
Acked-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/bpf/20241003210307.3847907-1-eddyz87@gmail.com
|
|
Previously when multiple BPF object files referencing the same extern
function (usually kfunc) are statically linked using `bpftool gen
object`, libbpf tries to get the nonexistent size of BTF_KIND_FUNC_PROTO
and fails. This test ensures it is fixed.
Signed-off-by: Eric Long <i@hack3r.moe>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241002-libbpf-dup-extern-funcs-v4-2-560eb460ff90@hack3r.moe
|
|
FUNCs do not have sizes, thus currently btf__resolve_size will fail
with -EINVAL. Add conditions so that we only update size when the BTF
object is not function or function prototype.
Signed-off-by: Eric Long <i@hack3r.moe>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241002-libbpf-dup-extern-funcs-v4-1-560eb460ff90@hack3r.moe
|
|
The prog_tests programs do not include the per-arch tools include
path, e.g. tools/arch/riscv/include. Some architectures depend those
files to build properly.
Include tools/arch/$(SUBARCH)/include in the selftests bpf build.
Fixes: 6d74d178fe6e ("tools: Add riscv barrier implementation")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240927131355.350918-2-bjorn@kernel.org
|
|
libbpf does not include the per-arch tools include path, e.g.
tools/arch/riscv/include. Some architectures depend those files to
build properly.
Include tools/arch/$(SUBARCH)/include in the libbpf build.
Fixes: 6d74d178fe6e ("tools: Add riscv barrier implementation")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240927131355.350918-1-bjorn@kernel.org
|
|
Production BPF programs are increasing in number of instructions and states
to the point, where optimising verification process for them is necessary
to avoid running into instruction limit. Authors of those BPF programs
need to analyze verifier output, for example, collecting the most
frequent source code lines to understand which part of the program has
the biggest verification cost.
This patch introduces `--top-src-lines` flag in veristat.
`--top-src-lines=N` makes veristat output N the most popular sorce code
lines, parsed from verification log.
An example of output:
```
sudo ./veristat --top-src-lines=2 bpf_flow.bpf.o
Processing 'bpf_flow.bpf.o'...
Top source lines (_dissect):
4: (bpf_helpers.h:161) asm volatile("r1 = %[ctx]\n\t"
4: (bpf_flow.c:155) if (iph && iph->ihl == 5 &&
...
```
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240930231522.58650-1-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Generate __attribute__((bpf_fastcall)) for kfuncs marked with
"bpf_fastcall" decl tag. E.g. for the following BTF:
$ bpftool btf dump file vmlinux
...
[A] FUNC 'bpf_rdonly_cast' type_id=...
...
[B] DECL_TAG 'bpf_kfunc' type_id=A component_idx=-1
[C] DECL_TAG 'bpf_fastcall' type_id=A component_idx=-1
Generate the following vmlinux.h:
#ifndef __VMLINUX_H__
#define __VMLINUX_H__
...
#ifndef __bpf_fastcall
#if __has_attribute(bpf_fastcall)
#define __bpf_fastcall __attribute__((bpf_fastcall))
#else
#define __bpf_fastcall
#endif
#endif
...
__bpf_fastcall extern void *bpf_rdonly_cast(...) ...;
The "bpf_fastcall" / "bpf_kfunc" tags pair would generated by pahole
when constructing vmlinux BTF.
While at it, sort printed kfuncs by name for better vmlinux.h
stability.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240916091712.2929279-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Since [1] kernel supports __bpf_fastcall attribute for helper function
bpf_get_smp_processor_id(). Update uapi definition for this helper in
order to have this attribute in the generated bpf_helper_defs.h
[1] commit 91b7fbf3936f ("bpf, x86, riscv, arm: no_caller_saved_registers for bpf_get_smp_processor_id()")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240916091712.2929279-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Update Makefile build rules to compile BPF programs with target endianness
rather than host byte-order. With recent changes, this allows building the
full selftests/bpf suite hosted on x86_64 and targeting s390x or mips64eb
for example.
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/880ccc6342cfc4d3c48b44f581e87adfbce2876e.1726475448.git.tony.ambardar@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Track target endianness in 'struct bpf_gen' and process in-memory data in
native byte-order, but on finalization convert the embedded loader BPF
insns to target endianness.
The light skeleton also includes a target-accessed data blob which is
heterogeneous and thus difficult to convert to target byte-order on
finalization. Add support functions to convert data to target endianness
as it is added to the blob.
Also add additional debug logging for data blob structure details and
skeleton loading.
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/569562e1d5bf1cce80a1f1a3882461ee2da1ffd5.1726475448.git.tony.ambardar@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Allow static linking object files of either endianness, checking that input
files have consistent byte-order, and setting output endianness from input.
Linking requires in-memory processing of programs, relocations, sections,
etc. in native endianness, and output conversion to target byte-order. This
is enabled by built-in ELF translation and recent BTF/BTF.ext endianness
functions. Further add local functions for swapping byte-order of sections
containing BPF insns.
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/b47ca686d02664843fc99b96262fe3259650bc43.1726475448.git.tony.ambardar@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Allow bpf_object__open() to access files of either endianness, and convert
included BPF programs to native byte-order in-memory for introspection.
Loading BPF objects of non-native byte-order is still disallowed however.
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/26353c1a1887a54400e1acd6c138fa90c99cdd40.1726475448.git.tony.ambardar@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Support for handling BTF data of either endianness was added in [1], but
did not include BTF.ext data for lack of use cases. Later, support for
static linking [2] provided a use case, but this feature and later ones
were restricted to native-endian usage.
Add support for BTF.ext handling in either endianness. Convert BTF.ext data
to native endianness when read into memory for further processing, and
support raw data access that restores the original byte-order for output.
Add internal header functions for byte-swapping func, line, and core info
records.
Add new API functions btf_ext__endianness() and btf_ext__set_endianness()
for query and setting byte-order, as already exist for BTF data.
[1] 3289959b97ca ("libbpf: Support BTF loading and raw data output in both endianness")
[2] 8fd27bf69b86 ("libbpf: Add BPF static linker BTF and BTF.ext support")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/133407ab20e0dd5c07cab2a6fa7879dee1ffa4bc.1726475448.git.tony.ambardar@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Object linking output data uses the default ELF_T_BYTE type for '.symtab'
section data, which disables any libelf-based translation. Explicitly set
the ELF_T_SYM type for output to restore libelf's byte-order conversion,
noting that input '.symtab' data is already correctly translated.
Fixes: faf6ed321cf6 ("libbpf: Add BPF static linker APIs")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/87868bfeccf3f51aec61260073f8778e9077050a.1726475448.git.tony.ambardar@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Mention struct btf_ext_info_sec rather than non-existent btf_sec_func_info
in BTF.ext struct documentation.
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/cde65e01a5f2945c578485fab265ef711e2daeb6.1726475448.git.tony.ambardar@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Fix missing newlines and extraneous terminal spaces in messages.
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/086884b7cbf87e524d584f9bf87f7a580e378b2b.1726475448.git.tony.ambardar@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When building selftests, the following was seen:
uprobe_multi.c: In function ‘trigger_uprobe’:
uprobe_multi.c:108:40: error: ‘MADV_PAGEOUT’ undeclared (first use in this function)
108 | madvise(addr, page_sz, MADV_PAGEOUT);
| ^~~~~~~~~~~~
uprobe_multi.c:108:40: note: each undeclared identifier is reported only once for each function it appears in
make: *** [Makefile:850: bpf-next/tools/testing/selftests/bpf/uprobe_multi] Error 1
...even with updated UAPI headers. It seems the above value is
defined in UAPI <linux/mman.h> but including that file triggers
other redefinition errors. Simplest solution is to add a
guarded definition, as was done for MADV_POPULATE_READ.
Fixes: 3c217a182018 ("selftests/bpf: add build ID tests")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240926144948.172090-1-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Remove unneeded semicolon in zip_archive_open().
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240926023823.3632993-1-nichen@iscas.ac.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This variable is never referenced in the code, just remove it.
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240925100005.3989-1-zhujun2@cmss.chinamobile.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
danobi/vmtest is going to migrate from using 9p to using virtio_fs to
mount the local rootfs: https://github.com/danobi/vmtest/pull/88
BPF CI uses danobi/vmtest to run bpf selftests and will need to support
VIRTIO_FS.
This change enables new kconfigs to be able to support the upcoming
danobi/vmtest.
Tested by building a new kernel with those config and confirming it
would successfully run with 9p (currently what is used by vmtest), and
with virtio_fs (using a local build of vmtest).
$ vmtest -k arch/x86/boot/bzImage "findmnt /"
=> bzImage
===> Booting
===> Setting up VM
===> Running command
TARGET SOURCE FSTYPE OPTIONS
/ /dev/root 9p rw,relatime,cache=5,access=client,msize=512000,trans=virtio
$ /home/chantra/local/danobi-vmtest/target/debug/vmtest -k arch/x86/boot/bzImage "findmnt /"
=> bzImage
===> Initializing host environment
===> Booting
===> Setting up VM
===> Running command
TARGET SOURCE FSTYPE OPTIONS
/ rootfs virtiofs rw,relatime
Changes in v2:
* Sorted configs alphabetically
Signed-off-by: Manu Bretelle <chantr4@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/bpf/20240925002210.501266-1-chantr4@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Referenced commit broke the logic of resetting expected_attach_type to
zero for allowed program types if kernel doesn't yet support such field.
We do need to overwrite and preserve expected_attach_type for
multi-uprobe though, but that can be done explicitly in
libbpf_prepare_prog_load().
Fixes: 5902da6d8a52 ("libbpf: Add uprobe multi link support to bpf_program__attach_usdt")
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Tao Chen <chen.dylane@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240925153012.212866-1-chen.dylane@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Reduce log level of BTF loading error to INFO if BTF is not required.
Andrii says:
Nowadays the expectation is that the BPF program will have a valid
.BTF section, so even though .BTF is "optional", I think it's fine
to emit a warning for that case (any reasonably recent Clang will
produce valid BTF).
Ihor's patch is fixing the situation with an outdated host kernel
that doesn't understand BTF. libbpf will try to "upload" the
program's BTF, but if that fails and the BPF object doesn't use
any features that require having BTF uploaded, then it's just an
information message to the user, but otherwise can be ignored.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Ihor Solodrai <ihor.solodrai@pm.me>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
There is no va_end after va_copy, just add it.
Signed-off-by: Zhang Jiao <zhangjiao2@cmss.chinamobile.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240924045534.8672-1-zhangjiao2@cmss.chinamobile.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Let's bail out from consumer test after we hit first fail,
so we don't pollute the log with many instances with possibly
the same error.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
With newly merged code the uprobe behaviour is slightly different
and affects uprobe consumer test.
We no longer need to check if the uprobe object is still preserved
after removing last uretprobe, because it stays as long as there's
pending/installed uretprobe instance.
This allows to run uretprobe consumers registered 'after' uprobe was
hit even if previous uretprobe got unregistered before being hit.
The uprobe object will be now removed after the last uprobe ref is
released and in such case it's held by ri->uprobe (return instance)
which is released after the uretprobe is hit.
Reported-by: Ihor Solodrai <ihor.solodrai@pm.me>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Ihor Solodrai <ihor.solodrai@pm.me>
Closes: https://lore.kernel.org/bpf/w6U8Z9fdhjnkSp2UaFaV1fGqJXvfLEtDKEUyGDkwmoruDJ_AgF_c0FFhrkeKW18OqiP-05s9yDKiT6X-Ns-avN_ABf0dcUkXqbSJN1TQSXo=@pm.me/
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Auto-dependencies generated for %.test.o files refer to skels using
filenames as opposed to full paths. This requires make to be able to
link this name to an actual path, because not all generated skels are
put in the working directory.
In the original patch [1], this was mitigated by this target:
$(notdir %.skel.h): $(TRUNNER_OUTPUT)/%.skel.h
@true
This turned out to be insufficient.
First, %.lskel.h and %.subskel.h were missed, because a typical
selftests/bpf build could find these files in the working directory.
This error was detected by an out-of-tree build [2].
Second, even with missing rules added, this target causes unnecessary
rebuilds in the out-of-tree case, as X.skel.h is searched for in the
working directory, and not in the $(OUTPUT).
Using vpath directive [3] is a better solution. Instead of introducing
a separate target (X.skel.h in addition to $(TRUNNER_OUTPUT)/X.skel.h),
make is instructed to search for skels in the output, which allows make
to correctly detect that skel has already been generated.
[1]: https://lore.kernel.org/bpf/VJihUTnvtwEgv_mOnpfy7EgD9D2MPNoHO-MlANeLIzLJPGhDeyOuGKIYyKgk0O6KPjfM-MuhtvPwZcngN8WFqbTnTRyCSMc2aMZ1ODm1T_g=@pm.me/
[2]: https://lore.kernel.org/bpf/CIjrhJwoIqMc2IhuppVqh4ZtJGbx8kC8rc9PHhAIU6RccnWT4I04F_EIr4GxQwxZe89McuGJlCnUk9UbkdvWtSJjAsd7mHmnTy9F8K2TLZM=@pm.me/
[3]: https://www.gnu.org/software/make/manual/html_node/Selective-Search.html
Reported-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Ihor Solodrai <ihor.solodrai@pm.me>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/bpf/20240916195919.1872371-2-ihor.solodrai@pm.me
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
test_skb_cgroup_id.sh was deleted in
https://git.kernel.org/bpf/bpf-next/c/f957c230e173
It has to be removed from TEST_PROGS variable in
tools/testing/selftests/bpf/Makefile, otherwise install target fails.
Signed-off-by: Ihor Solodrai <ihor.solodrai@pm.me>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/bpf/20240916195919.1872371-1-ihor.solodrai@pm.me
Link: https://lore.kernel.org/bpf/Q3BN2kW9Kgy6LkrDOwnyY4Pv7_YF8fInLCd2_QA3LimKYM3wD64kRdnwp7blwG2dI_s7UGnfUae-4_dOmuTrxpYCi32G_KTzB3PfmxIerH8=@pm.me/
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from ieee802154, bluetooth and netfilter.
Current release - regressions:
- eth: mlx5: fix wrong reserved field in hca_cap_2 in mlx5_ifc
- eth: am65-cpsw: fix forever loop in cleanup code
Current release - new code bugs:
- eth: mlx5: HWS, fixed double-free in error flow of creating SQ
Previous releases - regressions:
- core: avoid potential underflow in qdisc_pkt_len_init() with UFO
- core: test for not too small csum_start in virtio_net_hdr_to_skb()
- vrf: revert "vrf: remove unnecessary RCU-bh critical section"
- bluetooth:
- fix uaf in l2cap_connect
- fix possible crash on mgmt_index_removed
- dsa: improve shutdown sequence
- eth: mlx5e: SHAMPO, fix overflow of hd_per_wq
- eth: ip_gre: fix drops of small packets in ipgre_xmit
Previous releases - always broken:
- core: fix gso_features_check to check for both
dev->gso_{ipv4_,}max_size
- core: fix tcp fraglist segmentation after pull from frag_list
- netfilter: nf_tables: prevent nf_skb_duplicated corruption
- sctp: set sk_state back to CLOSED if autobind fails in
sctp_listen_start
- mac802154: fix potential RCU dereference issue in
mac802154_scan_worker
- eth: fec: restart PPS after link state change"
* tag 'net-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (48 commits)
sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start
dt-bindings: net: xlnx,axi-ethernet: Add missing reg minItems
doc: net: napi: Update documentation for napi_schedule_irqoff
net/ncsi: Disable the ncsi work before freeing the associated structure
net: phy: qt2025: Fix warning: unused import DeviceId
gso: fix udp gso fraglist segmentation after pull from frag_list
bridge: mcast: Fail MDB get request on empty entry
vrf: revert "vrf: Remove unnecessary RCU-bh critical section"
net: ethernet: ti: am65-cpsw: Fix forever loop in cleanup code
net: phy: realtek: Check the index value in led_hw_control_get
ppp: do not assume bh is held in ppp_channel_bridge_input()
selftests: rds: move include.sh to TEST_FILES
net: test for not too small csum_start in virtio_net_hdr_to_skb()
net: gso: fix tcp fraglist segmentation after pull from frag_list
ipv4: ip_gre: Fix drops of small packets in ipgre_xmit
net: stmmac: dwmac4: extend timeout for VLAN Tag register busy bit check
net: add more sanity checks to qdisc_pkt_len_init()
net: avoid potential underflow in qdisc_pkt_len_init() with UFO
net: ethernet: ti: cpsw_ale: Fix warning on some platforms
net: microchip: Make FDMA config symbol invisible
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix incorrect documentation in uapi/linux/netfilter/nf_tables.h
regarding flowtable hooks, from Phil Sutter.
2) Fix nft_audit.sh selftests with newer nft binaries, due to different
(valid) audit output, also from Phil.
3) Disable BH when duplicating packets via nf_dup infrastructure,
otherwise race on nf_skb_duplicated for locally generated traffic.
From Eric.
4) Missing return in callback of selftest C program, from zhang jiao.
netfilter pull request 24-10-02
* tag 'nf-24-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: Add missing return value
netfilter: nf_tables: prevent nf_skb_duplicated corruption
selftests: netfilter: Fix nft_audit.sh for newer nft binaries
netfilter: uapi: NFTA_FLOWTABLE_HOOK is NLA_NESTED
====================
Link: https://patch.msgid.link/20241002202421.1281311-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The include.sh file is generated for inclusion and should not be executable.
Otherwise, it will be added to kselftest-list.txt. Additionally, add the
executable bit for test.py at the same time to ensure proper functionality.
Fixes: 3ade6ce1255e ("selftests: rds: add testing infrastructure")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20240927041349.81216-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull generic unaligned.h cleanups from Al Viro:
"Get rid of architecture-specific <asm/unaligned.h> includes, replacing
them with a single generic <linux/unaligned.h> header file.
It's the second largest (after asm/io.h) class of asm/* includes, and
all but two architectures actually end up using exact same file.
Massage the remaining two (arc and parisc) to do the same and just
move the thing to from asm-generic/unaligned.h to linux/unaligned.h"
[ This is one of those things that we're better off doing outside the
merge window, and would only cause extra conflict noise if it was in
linux-next for the next release due to all the trivial #include line
updates. Rip off the band-aid. - Linus ]
* tag 'pull-work.unaligned' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
move asm/unaligned.h to linux/unaligned.h
arc: get rid of private asm/unaligned.h
parisc: get rid of private asm/unaligned.h
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- When sched_ext is in bypass mode (e.g. while disabling the BPF
scheduler), it was using one DSQ to implement global FIFO scheduling
as all it has to do is guaranteeing reasonable forward progress.
On multi-socket machines, this can lead to live-lock conditions under
certain workloads. Fixed by splitting the queue used for FIFO
scheduling per NUMA node. This required several preparation patches.
- Hotplug tests on powerpc could reliably trigger deadlock while
enabling a BPF scheduler.
This was caused by cpu_hotplug_lock nesting inside scx_fork_rwsem and
then CPU hotplug path trying to fork a new thread while holding
cpu_hotplug_lock.
Fixed by restructuring locking in enable and disable paths so that
the two locks are not coupled. This required several preparation
patches which also fixed a couple other issues in the enable path.
- A build fix for !CONFIG_SMP
- Userspace tooling sync and updates
* tag 'sched_ext-for-6.12-rc1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Remove redundant p->nr_cpus_allowed checker
sched_ext: Decouple locks in scx_ops_enable()
sched_ext: Decouple locks in scx_ops_disable_workfn()
sched_ext: Add scx_cgroup_enabled to gate cgroup operations and fix scx_tg_online()
sched_ext: Enable scx_ops_init_task() separately
sched_ext: Fix SCX_TASK_INIT -> SCX_TASK_READY transitions in scx_ops_enable()
sched_ext: Initialize in bypass mode
sched_ext: Remove SCX_OPS_PREPPING
sched_ext: Relocate check_hotplug_seq() call in scx_ops_enable()
sched_ext: Use shorter slice while bypassing
sched_ext: Split the global DSQ per NUMA node
sched_ext: Relocate find_user_dsq()
sched_ext: Allow only user DSQs for scx_bpf_consume(), scx_bpf_dsq_nr_queued() and bpf_iter_scx_dsq_new()
scx_flatcg: Use a user DSQ for fallback instead of SCX_DSQ_GLOBAL
tools/sched_ext: Receive misc updates from SCX repo
sched_ext: Add __COMPAT helpers for features added during v6.12 devel cycle
sched_ext: Build fix for !CONFIG_SMP
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"One urgent fix to vDSO as automated testing is failing due to this
bug"
* tag 'linux_kselftest-next-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: vDSO: align stack for O2-optimized memcpy
|
|
Pull x86 kvm updates from Paolo Bonzini:
"x86:
- KVM currently invalidates the entirety of the page tables, not just
those for the memslot being touched, when a memslot is moved or
deleted.
This does not traditionally have particularly noticeable overhead,
but Intel's TDX will require the guest to re-accept private pages
if they are dropped from the secure EPT, which is a non starter.
Actually, the only reason why this is not already being done is a
bug which was never fully investigated and caused VM instability
with assigned GeForce GPUs, so allow userspace to opt into the new
behavior.
- Advertise AVX10.1 to userspace (effectively prep work for the
"real" AVX10 functionality that is on the horizon)
- Rework common MSR handling code to suppress errors on userspace
accesses to unsupported-but-advertised MSRs
This will allow removing (almost?) all of KVM's exemptions for
userspace access to MSRs that shouldn't exist based on the vCPU
model (the actual cleanup is non-trivial future work)
- Rework KVM's handling of x2APIC ICR, again, because AMD (x2AVIC)
splits the 64-bit value into the legacy ICR and ICR2 storage,
whereas Intel (APICv) stores the entire 64-bit value at the ICR
offset
- Fix a bug where KVM would fail to exit to userspace if one was
triggered by a fastpath exit handler
- Add fastpath handling of HLT VM-Exit to expedite re-entering the
guest when there's already a pending wake event at the time of the
exit
- Fix a WARN caused by RSM entering a nested guest from SMM with
invalid guest state, by forcing the vCPU out of guest mode prior to
signalling SHUTDOWN (the SHUTDOWN hits the VM altogether, not the
nested guest)
- Overhaul the "unprotect and retry" logic to more precisely identify
cases where retrying is actually helpful, and to harden all retry
paths against putting the guest into an infinite retry loop
- Add support for yielding, e.g. to honor NEED_RESCHED, when zapping
rmaps in the shadow MMU
- Refactor pieces of the shadow MMU related to aging SPTEs in
prepartion for adding multi generation LRU support in KVM
- Don't stuff the RSB after VM-Exit when RETPOLINE=y and AutoIBRS is
enabled, i.e. when the CPU has already flushed the RSB
- Trace the per-CPU host save area as a VMCB pointer to improve
readability and cleanup the retrieval of the SEV-ES host save area
- Remove unnecessary accounting of temporary nested VMCB related
allocations
- Set FINAL/PAGE in the page fault error code for EPT violations if
and only if the GVA is valid. If the GVA is NOT valid, there is no
guest-side page table walk and so stuffing paging related metadata
is nonsensical
- Fix a bug where KVM would incorrectly synthesize a nested VM-Exit
instead of emulating posted interrupt delivery to L2
- Add a lockdep assertion to detect unsafe accesses of vmcs12
structures
- Harden eVMCS loading against an impossible NULL pointer deref
(really truly should be impossible)
- Minor SGX fix and a cleanup
- Misc cleanups
Generic:
- Register KVM's cpuhp and syscore callbacks when enabling
virtualization in hardware, as the sole purpose of said callbacks
is to disable and re-enable virtualization as needed
- Enable virtualization when KVM is loaded, not right before the
first VM is created
Together with the previous change, this simplifies a lot the logic
of the callbacks, because their very existence implies
virtualization is enabled
- Fix a bug that results in KVM prematurely exiting to userspace for
coalesced MMIO/PIO in many cases, clean up the related code, and
add a testcase
- Fix a bug in kvm_clear_guest() where it would trigger a buffer
overflow _if_ the gpa+len crosses a page boundary, which thankfully
is guaranteed to not happen in the current code base. Add WARNs in
more helpers that read/write guest memory to detect similar bugs
Selftests:
- Fix a goof that caused some Hyper-V tests to be skipped when run on
bare metal, i.e. NOT in a VM
- Add a regression test for KVM's handling of SHUTDOWN for an SEV-ES
guest
- Explicitly include one-off assets in .gitignore. Past Sean was
completely wrong about not being able to detect missing .gitignore
entries
- Verify userspace single-stepping works when KVM happens to handle a
VM-Exit in its fastpath
- Misc cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits)
Documentation: KVM: fix warning in "make htmldocs"
s390: Enable KVM_S390_UCONTROL config in debug_defconfig
selftests: kvm: s390: Add VM run test case
KVM: SVM: let alternatives handle the cases when RSB filling is required
KVM: VMX: Set PFERR_GUEST_{FINAL,PAGE}_MASK if and only if the GVA is valid
KVM: x86/mmu: Use KVM_PAGES_PER_HPAGE() instead of an open coded equivalent
KVM: x86/mmu: Add KVM_RMAP_MANY to replace open coded '1' and '1ul' literals
KVM: x86/mmu: Fold mmu_spte_age() into kvm_rmap_age_gfn_range()
KVM: x86/mmu: Morph kvm_handle_gfn_range() into an aging specific helper
KVM: x86/mmu: Honor NEED_RESCHED when zapping rmaps and blocking is allowed
KVM: x86/mmu: Add a helper to walk and zap rmaps for a memslot
KVM: x86/mmu: Plumb a @can_yield parameter into __walk_slot_rmaps()
KVM: x86/mmu: Move walk_slot_rmaps() up near for_each_slot_rmap_range()
KVM: x86/mmu: WARN on MMIO cache hit when emulating write-protected gfn
KVM: x86/mmu: Detect if unprotect will do anything based on invalid_list
KVM: x86/mmu: Subsume kvm_mmu_unprotect_page() into the and_retry() version
KVM: x86: Rename reexecute_instruction()=>kvm_unprotect_and_retry_on_failure()
KVM: x86: Update retry protection fields when forcing retry on emulation failure
KVM: x86: Apply retry protection to "unprotect on failure" path
KVM: x86: Check EMULTYPE_WRITE_PF_TO_SP before unprotecting gfn
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Clean up and improve vdso code: use SYM_* macros for function and
data annotations, add CFI annotations to fix GDB unwinding, optimize
the chacha20 implementation
- Add vfio-ap driver feature advertisement for use by libvirt and
mdevctl
* tag 's390-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vfio-ap: Driver feature advertisement
s390/vdso: Use one large alternative instead of an alternative branch
s390/vdso: Use SYM_DATA_START_LOCAL()/SYM_DATA_END() for data objects
tools: Add additional SYM_*() stubs to linkage.h
s390/vdso: Use macros for annotation of asm functions
s390/vdso: Add CFI annotations to __arch_chacha20_blocks_nostack()
s390/vdso: Fix comment within __arch_chacha20_blocks_nostack()
s390/vdso: Get rid of permutation constants
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull compute express link (cxl) updates from Dave Jiang:
"Major changes address HDM decoder initialization from DVSEC ranges,
refactoring the code related to cxl mailboxes to be independent of the
memory devices, and adding support for shared upstream link
access_coordinate calculation, as well as a change to remove locking
from memory notifier callback.
In addition, a number of misc cleanups and refactoring of the code are
also included.
Address HDM decoder initialization from DVSEC ranges:
- Only register non-zero DVSEC ranges
- Remove duplicate implementation of waiting for memory_info_valid
- Simplify the checking of mem_enabled in cxl_hdm_decode_init()
Refactor the code related to cxl mailboxes to be independent of the memory devices:
- Move cxl headers in include/linux/ to include/cxl
- Move all mailbox related data to 'struct cxl_mailbox'
- Refactor mailbox APIs with 'struct cxl_mailbox' as input instead of
memory device state
Add support for shared upstream link access_coordinate calculation for
configurations that have multiple targets under a switch or a root
port where the aggregated bandwidth can be greater than the upstream
link of the switch/RP upstream link:
- Preserve the CDAT access_coordinate from an endpoint
- Add the support for shared upstream link access_coordinate calculation
- Add documentation to explain how the calculations are done
Remove locking from memory notifier callback.
Misc cleanups:
- Convert devm_cxl_add_root() to return using ERR_CAST()
- cxl_test use dev_is_platform() instead of open coding
- Remove duplicate include of header core.h in core/cdat.c
- use scoped resource management to drop put_device() for cxl_port
- Use scoped_guard to drop device_lock() for cxl_port
- Refactor __devm_cxl_add_port() to drop gotos
- Rename cxl_setup_parent_dport to cxl_dport_init_aer and
cxl_dport_map_regs() to cxl_dport_map_ras()
- Refactor cxl_dport_init_aer() to be more concise
- Remove duplicate host_bridge->native_aer checking in
cxl_dport_init_ras_reporting()
- Fix comment for cxl_query_cmd()"
* tag 'cxl-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (21 commits)
cxl: Add documentation to explain the shared link bandwidth calculation
cxl: Calculate region bandwidth of targets with shared upstream link
cxl: Preserve the CDAT access_coordinate for an endpoint
cxl: Fix comment regarding cxl_query_cmd() return data
cxl: Convert cxl_internal_send_cmd() to use 'struct cxl_mailbox' as input
cxl: Move mailbox related bits to the same context
cxl: move cxl headers to new include/cxl/ directory
cxl/region: Remove lock from memory notifier callback
cxl/pci: simplify the check of mem_enabled in cxl_hdm_decode_init()
cxl/pci: Check Mem_info_valid bit for each applicable DVSEC
cxl/pci: Remove duplicated implementation of waiting for memory_info_valid
cxl/pci: Fix to record only non-zero ranges
cxl/pci: Remove duplicate host_bridge->native_aer checking
cxl/pci: cxl_dport_map_rch_aer() cleanup
cxl/pci: Rename cxl_setup_parent_dport() and cxl_dport_map_regs()
cxl/port: Refactor __devm_cxl_add_port() to drop goto pattern
cxl/port: Use scoped_guard()/guard() to drop device_lock() for cxl_port
cxl/port: Use __free() to drop put_device() for cxl_port
cxl: Remove duplicate included header file core.h
tools/testing/cxl: Use dev_is_platform()
...
|
|
When switching on -O2, gcc generates SSE2 instructions that assume a
16-byte aligned stack, which the standalone test's start point wasn't
aligning. Fix this with the usual alignment sequence.
Fixes: ecb8bd70d51 ("selftests: vDSO: build tests with O2 optimization")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202409241558.98e13f6f-oliver.sang@intel.com
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"19 hotfixes. 13 are cc:stable.
There's a focus on fixes for the memfd_pin_folios() work which was
added into 6.11. Apart from that, the usual shower of singleton fixes"
* tag 'mm-hotfixes-stable-2024-09-27-09-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
ocfs2: fix uninit-value in ocfs2_get_block()
zram: don't free statically defined names
memory tiers: use default_dram_perf_ref_source in log message
Revert "list: test: fix tests for list_cut_position()"
kselftests: mm: fix wrong __NR_userfaultfd value
compiler.h: specify correct attribute for .rodata..c_jump_table
mm/damon/Kconfig: update DAMON doc URL
mm: kfence: fix elapsed time for allocated/freed track
ocfs2: fix deadlock in ocfs2_get_system_file_inode
ocfs2: reserve space for inline xattr before attaching reflink tree
mm: migrate: annotate data-race in migrate_folio_unmap()
mm/hugetlb: simplify refs in memfd_alloc_folio
mm/gup: fix memfd_pin_folios alloc race panic
mm/gup: fix memfd_pin_folios hugetlb page allocation
mm/hugetlb: fix memfd_pin_folios resv_huge_pages leak
mm/hugetlb: fix memfd_pin_folios free_huge_pages leak
mm/filemap: fix filemap_get_folios_contig THP panic
mm: make SPLIT_PTE_PTLOCKS depend on SMP
tools: fix shared radix-tree build
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Fix objtool about do_syscall() and Clang
- Enable generic CPU vulnerabilites support
- Enable ACPI BGRT handling
- Rework CPU feature probe from CPUCFG/IOCSR
- Add ARCH_HAS_SET_MEMORY support
- Add ARCH_HAS_SET_DIRECT_MAP support
- Improve hardware page table walker
- Simplify _percpu_read() and _percpu_write()
- Add advanced extended IRQ model documentions
- Some bug fixes and other small changes
* tag 'loongarch-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
Docs/LoongArch: Add advanced extended IRQ model description
LoongArch: Remove posix_types.h include from sigcontext.h
LoongArch: Fix memleak in pci_acpi_scan_root()
LoongArch: Simplify _percpu_read() and _percpu_write()
LoongArch: Improve hardware page table walker
LoongArch: Add ARCH_HAS_SET_DIRECT_MAP support
LoongArch: Add ARCH_HAS_SET_MEMORY support
LoongArch: Rework CPU feature probe from CPUCFG/IOCSR
LoongArch: Enable ACPI BGRT handling
LoongArch: Enable generic CPU vulnerabilites support
LoongArch: Remove STACK_FRAME_NON_STANDARD(do_syscall)
LoongArch: Set AS_HAS_THIN_ADD_SUB as y if AS_IS_LLVM
LoongArch: Enable objtool for Clang
objtool: Handle frame pointer related instructions
|
|
There is no return value in count_entries, just add it.
Fixes: eff3c558bb7e ("netfilter: ctnetlink: support filtering by zone")
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
As a side-effect of nftables' commit dbff26bfba833 ("cache: consolidate
reset command"), audit logs changed when more objects were reset than
fit into a single netlink message.
Since the objects' distribution in netlink messages is not relevant,
implement a summarizing function which combines repeated audit logs into
a single one with summed up 'entries=' value.
Fixes: 203bb9d39866 ("selftests: netfilter: Extend nft_audit.sh")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
scx_flatcg was using SCX_DSQ_GLOBAL for fallback handling. However, it is
assuming that SCX_DSQ_GLOBAL isn't automatically consumed, which was true a
while ago but is no longer the case. Also, there are further changes planned
for SCX_DSQ_GLOBAL which will disallow explicit consumption from it. Switch
to a user DSQ for fallback.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>
|
|
grep -rnIF "#define __NR_userfaultfd"
tools/include/uapi/asm-generic/unistd.h:681:#define __NR_userfaultfd 282
arch/x86/include/generated/uapi/asm/unistd_32.h:374:#define
__NR_userfaultfd 374
arch/x86/include/generated/uapi/asm/unistd_64.h:327:#define
__NR_userfaultfd 323
arch/x86/include/generated/uapi/asm/unistd_x32.h:282:#define
__NR_userfaultfd (__X32_SYSCALL_BIT + 323)
arch/arm/include/generated/uapi/asm/unistd-eabi.h:347:#define
__NR_userfaultfd (__NR_SYSCALL_BASE + 388)
arch/arm/include/generated/uapi/asm/unistd-oabi.h:359:#define
__NR_userfaultfd (__NR_SYSCALL_BASE + 388)
include/uapi/asm-generic/unistd.h:681:#define __NR_userfaultfd 282
The number is dependent on the architecture. The above data shows that:
x86 374
x86_64 323
The value of __NR_userfaultfd was changed to 282 when asm-generic/unistd.h
was included. It makes the test to fail every time as the correct number
of this syscall on x86_64 is 323. Fix the header to asm/unistd.h.
Link: https://lkml.kernel.org/r/20240923053836.3270393-1-usama.anjum@collabora.com
Fixes: a5c6bc590094 ("selftests/mm: remove local __NR_* definitions")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
