| Age | Commit message (Collapse) | Author |
|---|
|
In commit 9b725a90a8f1 ("powerpc/64s: Disallow PROT_SAO in LPARs by
default") PROT_SAO was disabled in guests/LPARs by default. So skip
the test if we are running in a guest to avoid a spurious failure.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200901124653.523182-1-mpe@ellerman.id.au
|
|
Technically the bpf programs can sleep while attached to bpf_lsm_file_mprotect,
but such programs need to access user memory. So they're in might_fault()
category. Which means they cannot be called from file_mprotect lsm hook that
takes write lock on mm->mmap_lock.
Adjust the test accordingly.
Also add might_fault() to __bpf_prog_enter_sleepable() to catch such deadlocks early.
Fixes: 1e6c62a88215 ("bpf: Introduce sleepable BPF programs")
Fixes: e68a144547fc ("selftests/bpf: Add sleepable tests")
Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200831201651.82447-1-alexei.starovoitov@gmail.com
|
|
Add support for shared umems between hardware queues and devices to
the AF_XDP part of libbpf. This so that zero-copy can be achieved in
applications that want to send and receive packets between HW queues
on one device or between different devices/netdevs.
In order to create sockets that share a umem between hardware queues
and devices, a new function has been added called
xsk_socket__create_shared(). It takes the same arguments as
xsk_socket_create() plus references to a fill ring and a completion
ring. So for every socket that share a umem, you need to have one more
set of fill and completion rings. This in order to maintain the
single-producer single-consumer semantics of the rings.
You can create all the sockets via the new xsk_socket__create_shared()
call, or create the first one with xsk_socket__create() and the rest
with xsk_socket__create_shared(). Both methods work.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-14-git-send-email-magnus.karlsson@intel.com
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Do not delete clash entries on reply, let them expire instead,
from Florian Westphal.
2) Do not report EAGAIN to nfnetlink, otherwise this enters a busy loop.
Update nfnetlink_unicast() to translate EAGAIN to ENOBUFS.
3) Remove repeated words in code comments, from Randy Dunlap.
4) Several patches for the flowtable selftests, from Fabian Frederick.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While compiling libbpf, some GCC versions (at least 8.4.0) have difficulty
determining control flow and a emit warning for potentially uninitialized
usage of 'map', which results in a build error if using "-Werror":
In file included from libbpf.c:56:
libbpf.c: In function '__bpf_object__open':
libbpf_internal.h:59:2: warning: 'map' may be used uninitialized in this function [-Wmaybe-uninitialized]
libbpf_print(level, "libbpf: " fmt, ##__VA_ARGS__); \
^~~~~~~~~~~~
libbpf.c:5032:18: note: 'map' was declared here
struct bpf_map *map, *targ_map;
^~~
The warning/error is false based on code inspection, so silence it with a
NULL initialization.
Fixes: 646f02ffdd49 ("libbpf: Add BTF-defined map-in-map support")
Reference: 063e68813391 ("libbpf: Fix false uninitialized variable warning")
Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200831000304.1696435-1-Tony.Ambardar@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Revert our removal of PROT_SAO, at least one user expressed an
interest in using it on Power9. Instead don't allow it to be used in
guests unless enabled explicitly at compile time.
- A fix for a crash introduced by a recent change to FP handling.
- Revert a change to our idle code that left Power10 with no idle
support.
- One minor fix for the new scv system call path to set PPR.
- Fix a crash in our "generic" PMU if branch stack events were enabled.
- A fix for the IMC PMU, to correctly identify host kernel samples.
- The ADB_PMU powermac code was found to be incompatible with
VMAP_STACK, so make them incompatible in Kconfig until the code can
be fixed.
- A build fix in drivers/video/fbdev/controlfb.c, and a documentation
fix.
Thanks to Alexey Kardashevskiy, Athira Rajeev, Christophe Leroy,
Giuseppe Sacco, Madhavan Srinivasan, Milton Miller, Nicholas Piggin,
Pratik Rajesh Sampat, Randy Dunlap, Shawn Anastasio, Vaidyanathan
Srinivasan.
* tag 'powerpc-5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32s: Disable VMAP stack which CONFIG_ADB_PMU
Revert "powerpc/powernv/idle: Replace CPU feature check with PVR check"
powerpc/perf: Fix reading of MSR[HV/PR] bits in trace-imc
powerpc/perf: Fix crashes with generic_compat_pmu & BHRB
powerpc/64s: Fix crash in load_fp_state() due to fpexc_mode
powerpc/64s: scv entry should set PPR
Documentation/powerpc: fix malformed table in syscall64-abi
video: fbdev: controlfb: Fix build for COMPILE_TEST=y && PPC_PMAC=n
selftests/powerpc: Update PROT_SAO test to skip ISA 3.1
powerpc/64s: Disallow PROT_SAO in LPARs by default
Revert "powerpc/64s: Remove PROT_SAO support"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Let's try this again... Here are some USB fixes for 5.9-rc3.
This differs from the previous pull request for this release in that
the usb gadget patch now does not break some systems, and actually
does what it was intended to do. Many thanks to Marek Szyprowski for
quickly noticing and testing the patch from Andy Shevchenko to resolve
this issue.
Additionally, some more new USB quirks have been added to get some new
devices to work properly based on user reports.
Other than that, the patches are all here, and they contain:
- usb gadget driver fixes
- xhci driver fixes
- typec fixes
- new quirks and ids
- fixes for USB patches that went into 5.9-rc1.
All of these have been tested in linux-next with no reported issues"
* tag 'usb-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
usb: storage: Add unusual_uas entry for Sony PSZ drives
USB: Ignore UAS for JMicron JMS567 ATA/ATAPI Bridge
usb: host: ohci-exynos: Fix error handling in exynos_ohci_probe()
USB: gadget: u_f: Unbreak offset calculation in VLAs
USB: quirks: Ignore duplicate endpoint on Sound Devices MixPre-D
usb: typec: tcpm: Fix Fix source hard reset response for TDA 2.3.1.1 and TDA 2.3.1.2 failures
USB: PHY: JZ4770: Fix static checker warning.
USB: gadget: f_ncm: add bounds checks to ncm_unwrap_ntb()
USB: gadget: u_f: add overflow checks to VLA macros
xhci: Always restore EP_SOFT_CLEAR_TOGGLE even if ep reset failed
xhci: Do warm-reset when both CAS and XDEV_RESUME are set
usb: host: xhci: fix ep context print mismatch in debugfs
usb: uas: Add quirk for PNY Pro Elite
tools: usb: move to tools buildsystem
USB: Fix device driver race
USB: Also match device drivers using the ->match vfunc
usb: host: xhci-tegra: fix tegra_xusb_get_phy()
usb: host: xhci-tegra: otg usb2/usb3 port init
usb: hcd: Fix use after free in usb_hcd_pci_remove()
usb: typec: ucsi: Hold con->lock for the entire duration of ucsi_register_port()
...
|
|
Modify few tests to sanity test sleepable bpf functionality.
Running 'bench trig-fentry-sleep' vs 'bench trig-fentry' and 'perf report':
sleepable with SRCU:
3.86% bench [k] __srcu_read_unlock
3.22% bench [k] __srcu_read_lock
0.92% bench [k] bpf_prog_740d4210cdcd99a3_bench_trigger_fentry_sleep
0.50% bench [k] bpf_trampoline_10297
0.26% bench [k] __bpf_prog_exit_sleepable
0.21% bench [k] __bpf_prog_enter_sleepable
sleepable with RCU_TRACE:
0.79% bench [k] bpf_prog_740d4210cdcd99a3_bench_trigger_fentry_sleep
0.72% bench [k] bpf_trampoline_10381
0.31% bench [k] __bpf_prog_exit_sleepable
0.29% bench [k] __bpf_prog_enter_sleepable
non-sleepable with RCU:
0.88% bench [k] bpf_prog_740d4210cdcd99a3_bench_trigger_fentry
0.84% bench [k] bpf_trampoline_10297
0.13% bench [k] __bpf_prog_enter
0.12% bench [k] __bpf_prog_exit
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20200827220114.69225-6-alexei.starovoitov@gmail.com
|
|
Pass request to load program as sleepable via ".s" suffix in the section name.
If it happens in the future that all map types and helpers are allowed with
BPF_F_SLEEPABLE flag "fmod_ret/" and "lsm/" can be aliased to "fmod_ret.s/" and
"lsm.s/" to make all lsm and fmod_ret programs sleepable by default. The fentry
and fexit programs would always need to have sleepable vs non-sleepable
distinction, since not all fentry/fexit progs will be attached to sleepable
kernel functions.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: KP Singh <kpsingh@google.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200827220114.69225-5-alexei.starovoitov@gmail.com
|
|
Sleepable BPF programs can now use copy_from_user() to access user memory.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20200827220114.69225-4-alexei.starovoitov@gmail.com
|
|
Introduce sleepable BPF programs that can request such property for themselves
via BPF_F_SLEEPABLE flag at program load time. In such case they will be able
to use helpers like bpf_copy_from_user() that might sleep. At present only
fentry/fexit/fmod_ret and lsm programs can request to be sleepable and only
when they are attached to kernel functions that are known to allow sleeping.
The non-sleepable programs are relying on implicit rcu_read_lock() and
migrate_disable() to protect life time of programs, maps that they use and
per-cpu kernel structures used to pass info between bpf programs and the
kernel. The sleepable programs cannot be enclosed into rcu_read_lock().
migrate_disable() maps to preempt_disable() in non-RT kernels, so the progs
should not be enclosed in migrate_disable() as well. Therefore
rcu_read_lock_trace is used to protect the life time of sleepable progs.
There are many networking and tracing program types. In many cases the
'struct bpf_prog *' pointer itself is rcu protected within some other kernel
data structure and the kernel code is using rcu_dereference() to load that
program pointer and call BPF_PROG_RUN() on it. All these cases are not touched.
Instead sleepable bpf programs are allowed with bpf trampoline only. The
program pointers are hard-coded into generated assembly of bpf trampoline and
synchronize_rcu_tasks_trace() is used to protect the life time of the program.
The same trampoline can hold both sleepable and non-sleepable progs.
When rcu_read_lock_trace is held it means that some sleepable bpf program is
running from bpf trampoline. Those programs can use bpf arrays and preallocated
hash/lru maps. These map types are waiting on programs to complete via
synchronize_rcu_tasks_trace();
Updates to trampoline now has to do synchronize_rcu_tasks_trace() and
synchronize_rcu_tasks() to wait for sleepable progs to finish and for
trampoline assembly to finish.
This is the first step of introducing sleepable progs. Eventually dynamically
allocated hash maps can be allowed and networking program types can become
sleepable too.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20200827220114.69225-3-alexei.starovoitov@gmail.com
|
|
Avoid bad command arguments.
Based on tools/power/cpupower/bench/cpufreq-bench_plot.sh
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Fix some shellcheck SC2181 warnings:
"Check exit code directly with e.g. 'if mycmd;', not indirectly with
$?." as suggested by Stefano Brivio.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
'who' variable was not used in make_file()
Problem found using Shellcheck
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
exit script with comments when parameters are wrong during address
addition. No need for a message when trying to change MTU with lower
values: output is self-explanatory.
Use short testing sequence to avoid shellcheck warnings
(suggested by Stefano Brivio).
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
nft_flowtable.sh is made for bash not sh.
Also give values which not return "RTNETLINK answers: Invalid argument"
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch tests the inner map size can be different
for reuseport_sockarray but has to be the same for
arraymap. A new subtest "diff_size" is added for this.
The existing test is moved to a subtest "lookup_update".
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200828011819.1970825-1-kafai@fb.com
|
|
bpf_link_info.iter is used by link_query to return bpf_iter_link_info
to user space. Fields may be different, e.g., map_fd vs. map_id, so
we cannot reuse the exact structure. But make them similar, e.g.,
struct bpf_link_info {
/* common fields */
union {
struct { ... } raw_tracepoint;
struct { ... } tracing;
...
struct {
/* common fields for iter */
union {
struct {
__u32 map_id;
} map;
/* other structs for other targets */
};
};
};
};
so the structure is extensible the same way as bpf_iter_link_info.
Fixes: 6b0a249a301e ("bpf: Implement link_query for bpf iterators")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200828051922.758950-1-yhs@fb.com
|
|
The system for "Auto-detecting system features" located under
tools/build/ are (currently) used by perf, libbpf and bpftool. It can
contain stalled feature detection files, which are not cleaned up by
libbpf and bpftool on make clean (side-note: perf tool is correct).
Fix this by making the users invoke the make clean target.
Some details about the changes. The libbpf Makefile already had a
clean-config target (which seems to be copy-pasted from perf), but this
target was not "connected" (a make dependency) to clean target. Choose
not to rename target as someone might be using it. Did change the output
from "CLEAN config" to "CLEAN feature-detect", to make it more clear
what happens.
This is related to the complaint and troubleshooting in the following
link: https://lore.kernel.org/lkml/20200818122007.2d1cfe2d@carbon/
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/lkml/20200818122007.2d1cfe2d@carbon/
Link: https://lore.kernel.org/bpf/159851841661.1072907.13770213104521805592.stgit@firesoul
|
|
When stdout output from the selftests tool 'test_maps' gets redirected
into e.g file or pipe, then the output lines increase a lot (from 21
to 33949 lines). This is caused by the printf that happens before the
fork() call, and there are user-space buffered printf data that seems
to be duplicated into the forked process.
To fix this fflush() stdout before the fork loop in __run_parallel().
Fixes: 1a97cf1fe503 ("selftests/bpf: speedup test_maps")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/159842985651.1050885.2154399297503372406.stgit@firesoul
|
|
Fix compilation warnings due to __u64 defined differently as `unsigned long`
or `unsigned long long` on different architectures (e.g., ppc64le differs from
x86-64). Also cast one argument to size_t to fix printf warning of similar
nature.
Fixes: eacaaed784e2 ("libbpf: Implement enum value-based CO-RE relocations")
Fixes: 50e09460d9f8 ("libbpf: Skip well-known ELF sections when iterating ELF")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200827041109.3613090-1-andriin@fb.com
|
|
Added some test_verifier bounds check test cases for
xor operations.
$ ./test_verifier
...
#78/u bounds check for reg = 0, reg xor 1 OK
#78/p bounds check for reg = 0, reg xor 1 OK
#79/u bounds check for reg32 = 0, reg32 xor 1 OK
#79/p bounds check for reg32 = 0, reg32 xor 1 OK
#80/u bounds check for reg = 2, reg xor 3 OK
#80/p bounds check for reg = 2, reg xor 3 OK
#81/u bounds check for reg = any, reg xor 3 OK
#81/p bounds check for reg = any, reg xor 3 OK
#82/u bounds check for reg32 = any, reg32 xor 3 OK
#82/p bounds check for reg32 = any, reg32 xor 3 OK
#83/u bounds check for reg > 0, reg xor 3 OK
#83/p bounds check for reg > 0, reg xor 3 OK
#84/u bounds check for reg32 > 0, reg32 xor 3 OK
#84/p bounds check for reg32 > 0, reg32 xor 3 OK
...
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200825064609.2018077-1-yhs@fb.com
|
|
nexthops
Test that an IPv6 route can not use a nexthop group with mixed IPv4 and
IPv6 nexthops, but can use it after replacing the IPv4 nexthops with
IPv6 nexthops.
Output without previous patch:
# ./fib_nexthops.sh -t ipv6_fcnal_runtime
IPv6 functional runtime
-----------------------
TEST: Route add [ OK ]
TEST: Route delete [ OK ]
TEST: Ping with nexthop [ OK ]
TEST: Ping - multipath [ OK ]
TEST: Ping - blackhole [ OK ]
TEST: Ping - blackhole replaced with gateway [ OK ]
TEST: Ping - gateway replaced by blackhole [ OK ]
TEST: Ping - group with blackhole [ OK ]
TEST: Ping - group blackhole replaced with gateways [ OK ]
TEST: IPv6 route with device only nexthop [ OK ]
TEST: IPv6 multipath route with nexthop mix - dev only + gw [ OK ]
TEST: IPv6 route can not have a v4 gateway [ OK ]
TEST: Nexthop replace - v6 route, v4 nexthop [ OK ]
TEST: Nexthop replace of group entry - v6 route, v4 nexthop [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route using a group after removing v4 gateways [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route using a group after replacing v4 gateways [FAIL]
TEST: Nexthop with default route and rpfilter [ OK ]
TEST: Nexthop with multipath default route and rpfilter [ OK ]
Tests passed: 21
Tests failed: 1
Output with previous patch:
# ./fib_nexthops.sh -t ipv6_fcnal_runtime
IPv6 functional runtime
-----------------------
TEST: Route add [ OK ]
TEST: Route delete [ OK ]
TEST: Ping with nexthop [ OK ]
TEST: Ping - multipath [ OK ]
TEST: Ping - blackhole [ OK ]
TEST: Ping - blackhole replaced with gateway [ OK ]
TEST: Ping - gateway replaced by blackhole [ OK ]
TEST: Ping - group with blackhole [ OK ]
TEST: Ping - group blackhole replaced with gateways [ OK ]
TEST: IPv6 route with device only nexthop [ OK ]
TEST: IPv6 multipath route with nexthop mix - dev only + gw [ OK ]
TEST: IPv6 route can not have a v4 gateway [ OK ]
TEST: Nexthop replace - v6 route, v4 nexthop [ OK ]
TEST: Nexthop replace of group entry - v6 route, v4 nexthop [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route using a group after removing v4 gateways [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route using a group after replacing v4 gateways [ OK ]
TEST: Nexthop with default route and rpfilter [ OK ]
TEST: Nexthop with multipath default route and rpfilter [ OK ]
Tests passed: 22
Tests failed: 0
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test that an IPv6 route can not use a nexthop group with mixed IPv4 and
IPv6 nexthops, but can use it after deleting the IPv4 nexthops.
Output without previous patch:
# ./fib_nexthops.sh -t ipv6_fcnal_runtime
IPv6 functional runtime
-----------------------
TEST: Route add [ OK ]
TEST: Route delete [ OK ]
TEST: Ping with nexthop [ OK ]
TEST: Ping - multipath [ OK ]
TEST: Ping - blackhole [ OK ]
TEST: Ping - blackhole replaced with gateway [ OK ]
TEST: Ping - gateway replaced by blackhole [ OK ]
TEST: Ping - group with blackhole [ OK ]
TEST: Ping - group blackhole replaced with gateways [ OK ]
TEST: IPv6 route with device only nexthop [ OK ]
TEST: IPv6 multipath route with nexthop mix - dev only + gw [ OK ]
TEST: IPv6 route can not have a v4 gateway [ OK ]
TEST: Nexthop replace - v6 route, v4 nexthop [ OK ]
TEST: Nexthop replace of group entry - v6 route, v4 nexthop [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route using a group after deleting v4 gateways [FAIL]
TEST: Nexthop with default route and rpfilter [ OK ]
TEST: Nexthop with multipath default route and rpfilter [ OK ]
Tests passed: 18
Tests failed: 1
Output with previous patch:
bash-5.0# ./fib_nexthops.sh -t ipv6_fcnal_runtime
IPv6 functional runtime
-----------------------
TEST: Route add [ OK ]
TEST: Route delete [ OK ]
TEST: Ping with nexthop [ OK ]
TEST: Ping - multipath [ OK ]
TEST: Ping - blackhole [ OK ]
TEST: Ping - blackhole replaced with gateway [ OK ]
TEST: Ping - gateway replaced by blackhole [ OK ]
TEST: Ping - group with blackhole [ OK ]
TEST: Ping - group blackhole replaced with gateways [ OK ]
TEST: IPv6 route with device only nexthop [ OK ]
TEST: IPv6 multipath route with nexthop mix - dev only + gw [ OK ]
TEST: IPv6 route can not have a v4 gateway [ OK ]
TEST: Nexthop replace - v6 route, v4 nexthop [ OK ]
TEST: Nexthop replace of group entry - v6 route, v4 nexthop [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways [ OK ]
TEST: IPv6 route using a group after deleting v4 gateways [ OK ]
TEST: Nexthop with default route and rpfilter [ OK ]
TEST: Nexthop with multipath default route and rpfilter [ OK ]
Tests passed: 19
Tests failed: 0
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are code paths where EINVAL is returned directly without setting
errno. In that case, errno could be 0, which would mask the
failure. For example, if a careless programmer set log_level to 10000
out of laziness, they would have to spend a long time trying to figure
out why.
Fixes: 4f33ddb4e3e2 ("libbpf: Propagate EPERM to caller on program load")
Signed-off-by: Alex Gartrell <alexgartrell@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200826075549.1858580-1-alexgartrell@gmail.com
|
|
This adds further tests to ensure access permissions and restrictions
are applied properly for some map types such as sock-map.
It also adds another negative tests to assert static functions cannot be
replaced. In the 'unreliable' mode it still fails with error 'tracing progs
cannot use bpf_spin_lock yet' with the change in the verifier
Signed-off-by: Udip Pant <udippant@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200825232003.2877030-5-udippant@fb.com
|
|
This adds test to enforce same check for the return code for the extended prog
as it is enforced for the target program. It asserts failure for a
return code, which is permitted without the patch in this series, while
it is restricted after the application of this patch.
Signed-off-by: Udip Pant <udippant@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200825232003.2877030-4-udippant@fb.com
|
|
This adds a selftest that tests the behavior when a freplace target program
attempts to make a write access on a packet. The expectation is that the read or write
access is granted based on the program type of the linked program and
not itself (which is of type, for e.g., BPF_PROG_TYPE_EXT).
This test fails without the associated patch on the verifier.
Signed-off-by: Udip Pant <udippant@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200825232003.2877030-3-udippant@fb.com
|
|
There is a spelling mistake in a check error message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200826085907.43095-1-colin.king@canonical.com
|
|
Alexei reported compile breakage on newer systems with
following error:
In file included from /usr/include/fcntl.h:290:0,
4814 from ./test_progs.h:29,
4815 from
.../bpf-next/tools/testing/selftests/bpf/prog_tests/d_path.c:3:
4816In function ‘open’,
4817 inlined from ‘trigger_fstat_events’ at
.../bpf-next/tools/testing/selftests/bpf/prog_tests/d_path.c:50:10,
4818 inlined from ‘test_d_path’ at
.../bpf-next/tools/testing/selftests/bpf/prog_tests/d_path.c:119:6:
4819/usr/include/x86_64-linux-gnu/bits/fcntl2.h:50:4: error: call to
‘__open_missing_mode’ declared with attribute error: open with O_CREAT
or O_TMPFILE in second argument needs 3 arguments
4820 __open_missing_mode ();
4821 ^~~~~~~~~~~~~~~~~~~~~~
We're missing permission bits as 3rd argument
for open call with O_CREAT flag specified.
Fixes: e4d1af4b16f8 ("selftests/bpf: Add test for d_path helper")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200826101845.747617-1-jolsa@kernel.org
|
|
Adding test to for sets resolve_btfids. We're checking that
testing set gets properly resolved and sorted.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-15-jolsa@kernel.org
|
|
Adding test for d_path helper which is pretty much
copied from Wenbo Zhang's test for bpf_get_fd_path,
which never made it in.
The test is doing fstat/close on several fd types,
and verifies we got the d_path helper working on
kernel probes for vfs_getattr/filp_close functions.
Original-patch-by: Wenbo Zhang <ethercflow@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-14-jolsa@kernel.org
|
|
Adding verifier test for attaching tracing program and
calling d_path helper from within and testing that it's
allowed for dentry_open function and denied for 'd_path'
function with appropriate error.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-13-jolsa@kernel.org
|
|
Adding d_path helper function that returns full path for
given 'struct path' object, which needs to be the kernel
BTF 'path' object. The path is returned in buffer provided
'buf' of size 'sz' and is zero terminated.
bpf_d_path(&file->f_path, buf, size);
The helper calls directly d_path function, so there's only
limited set of function it can be called from. Adding just
very modest set for the start.
Updating also bpf.h tools uapi header and adding 'path' to
bpf_helpers_doc.py script.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-11-jolsa@kernel.org
|
|
Adding support to define sorted set of BTF ID values.
Following defines sorted set of BTF ID values:
BTF_SET_START(btf_allowlist_d_path)
BTF_ID(func, vfs_truncate)
BTF_ID(func, vfs_fallocate)
BTF_ID(func, dentry_open)
BTF_ID(func, vfs_getattr)
BTF_ID(func, filp_close)
BTF_SET_END(btf_allowlist_d_path)
It defines following 'struct btf_id_set' variable to access
values and count:
struct btf_id_set btf_allowlist_d_path;
Adding 'allowed' callback to struct bpf_func_proto, to allow
verifier the check on allowed callers.
Adding btf_id_set_contains function, which will be used by
allowed callbacks to verify the caller's BTF ID value is
within allowed set.
Also removing extra '\' in __BTF_ID_LIST macro.
Added BTF_SET_START_GLOBAL macro for global sets.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-10-jolsa@kernel.org
|
|
The set symbol does not have the unique number suffix,
so we need to give it a special parsing function.
This was omitted in the first batch, because there was
no set support yet, so it slipped in the testing.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-3-jolsa@kernel.org
|
|
To make sure we don't crash on malformed symbols.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-2-jolsa@kernel.org
|
|
inode_local_storage:
* Hook to the file_open and inode_unlink LSM hooks.
* Create and unlink a temporary file.
* Store some information in the inode's bpf_local_storage during
file_open.
* Verify that this information exists when the file is unlinked.
sk_local_storage:
* Hook to the socket_post_create and socket_bind LSM hooks.
* Open and bind a socket and set the sk_storage in the
socket_post_create hook using the start_server helper.
* Verify if the information is set in the socket_bind hook.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825182919.1118197-8-kpsingh@chromium.org
|
|
Adds support for both bpf_{sk, inode}_storage_{get, delete} to be used
in LSM programs. These helpers are not used for tracing programs
(currently) as their usage is tied to the life-cycle of the object and
should only be used where the owning object won't be freed (when the
owning object is passed as an argument to the LSM hook). Thus, they
are safer to use in LSM hooks than tracing. Usage of local storage in
tracing programs will probably follow a per function based whitelist
approach.
Since the UAPI helper signature for bpf_sk_storage expect a bpf_sock,
it, leads to a compilation warning for LSM programs, it's also updated
to accept a void * pointer instead.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200825182919.1118197-7-kpsingh@chromium.org
|
|
Similar to bpf_local_storage for sockets, add local storage for inodes.
The life-cycle of storage is managed with the life-cycle of the inode.
i.e. the storage is destroyed along with the owning inode.
The BPF LSM allocates an __rcu pointer to the bpf_local_storage in the
security blob which are now stackable and can co-exist with other LSMs.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200825182919.1118197-6-kpsingh@chromium.org
|
|
Refactor the functionality in bpf_sk_storage.c so that concept of
storage linked to kernel objects can be extended to other objects like
inode, task_struct etc.
Each new local storage will still be a separate map and provide its own
set of helpers. This allows for future object specific extensions and
still share a lot of the underlying implementation.
This includes the changes suggested by Martin in:
https://lore.kernel.org/bpf/20200725013047.4006241-1-kafai@fb.com/
adding new map operations to support bpf_local_storage maps:
* storages for different kernel objects to optionally have different
memory charging strategy (map_local_storage_charge,
map_local_storage_uncharge)
* Functionality to extract the storage pointer from a pointer to the
owning object (map_owner_storage_ptr)
Co-developed-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200825182919.1118197-4-kpsingh@chromium.org
|
|
A purely mechanical change to split the renaming from the actual
generalization.
Flags/consts:
SK_STORAGE_CREATE_FLAG_MASK BPF_LOCAL_STORAGE_CREATE_FLAG_MASK
BPF_SK_STORAGE_CACHE_SIZE BPF_LOCAL_STORAGE_CACHE_SIZE
MAX_VALUE_SIZE BPF_LOCAL_STORAGE_MAX_VALUE_SIZE
Structs:
bucket bpf_local_storage_map_bucket
bpf_sk_storage_map bpf_local_storage_map
bpf_sk_storage_data bpf_local_storage_data
bpf_sk_storage_elem bpf_local_storage_elem
bpf_sk_storage bpf_local_storage
The "sk" member in bpf_local_storage is also updated to "owner"
in preparation for changing the type to void * in a subsequent patch.
Functions:
selem_linked_to_sk selem_linked_to_storage
selem_alloc bpf_selem_alloc
__selem_unlink_sk bpf_selem_unlink_storage_nolock
__selem_link_sk bpf_selem_link_storage_nolock
selem_unlink_sk __bpf_selem_unlink_storage
sk_storage_update bpf_local_storage_update
__sk_storage_lookup bpf_local_storage_lookup
bpf_sk_storage_map_free bpf_local_storage_map_free
bpf_sk_storage_map_alloc bpf_local_storage_map_alloc
bpf_sk_storage_map_alloc_check bpf_local_storage_map_alloc_check
bpf_sk_storage_map_check_btf bpf_local_storage_map_check_btf
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200825182919.1118197-2-kpsingh@chromium.org
|
|
Currently test_sk_assign failed verifier with llvm11/llvm12.
During debugging, I found the default verifier output is
truncated like below
Verifier analysis:
Skipped 2200 bytes, use 'verb' option for the full verbose log.
[...]
off=23,r=34,imm=0) R5=inv0 R6=ctx(id=0,off=0,imm=0) R7=pkt(id=0,off=0,r=34,imm=0) R10=fp0
80: (0f) r7 += r2
last_idx 80 first_idx 21
regs=4 stack=0 before 78: (16) if w3 == 0x11 goto pc+1
when I am using "./test_progs -vv -t assign".
The reason is tc verbose mode is not enabled.
This patched enabled tc verbose mode and the output looks like below
Verifier analysis:
0: (bf) r6 = r1
1: (b4) w0 = 2
2: (61) r1 = *(u32 *)(r6 +80)
3: (61) r7 = *(u32 *)(r6 +76)
4: (bf) r2 = r7
5: (07) r2 += 14
6: (2d) if r2 > r1 goto pc+61
R0_w=inv2 R1_w=pkt_end(id=0,off=0,imm=0) R2_w=pkt(id=0,off=14,r=14,imm=0)
...
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200824222807.100200-1-yhs@fb.com
|
|
Commit 643e7233aa94 ("selftests/bpf: Test_progs option for getting number of
tests") introduced ability to getting number of tests, which is targeted
towards scripting. As demonstrate in the commit the number can be use as a
shell variable for further scripting.
The test_progs program support "flavor", which is detected by the binary
have a "-flavor" in the executable name. One example is test_progs-no_alu32,
which load bpf-progs compiled with disabled alu32, located in dir 'no_alu32/'.
The problem is that invoking a "flavor" binary prints to stdout e.g.:
"Switching to flavor 'no_alu32' subdirectory..."
Thus, intermixing with the number of tests, making it unusable for scripting.
Fix the issue by only printing "flavor" info when verbose -v option is used.
Fixes: 643e7233aa94 ("selftests/bpf: Test_progs option for getting number of tests")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/159827024012.923543.7104106594870150597.stgit@firesoul
|
|
Currently, the test takes about 626 seconds to complete because of an
inefficient use of the device's TCAM. Reduce the runtime to 202 seconds
by inserting all the flower filters with the same preference and mask,
but with a different key.
In particular, this reduces the deletion of the qdisc (which triggers
the deletion of all the filters) from 66 seconds to 0.2 seconds. This
prevents various netlink requests from user space applications (e.g.,
systemd-networkd) from timing-out because RTNL is not held for too long
anymore.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, mausezahn delay parameter in mirror_test() is specified with
'ms' units.
mausezahn versions before 0.6.5 interpret 'ms' as seconds and therefore
the tests that use mirror_test() take a very long time to complete.
Resolve this by specifying 'msec' units.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current combination of rate and burst size does not adhere to
Spectrum-{2,3} limitation which states that the minimum burst size
should be 40% of the rate.
Increase the burst size in order to honor above mentioned limitation and
avoid intermittent failures of this test case on Spectrum-{2,3}.
Remove the first sub-test case as the variation in number of received
packets is simply too large to reliably test it.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current combination of rate and burst size does not adhere to
Spectrum-{2,3} limitation which states that the minimum burst size
should be 40% of the rate.
Increase the burst size in order to honor above mentioned limitation and
avoid intermittent failures of this test case on Spectrum-{2,3}.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On Spectrum-{2,3} the required accuracy is +/-10%.
Align the test to this requirement so that it can reliably pass on these
platforms.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Address review by Yonghong, to bring the new tests in line with the
usual code style.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200824084523.13104-1-lmb@cloudflare.com
|
