| Age | Commit message (Collapse) | Author |
|---|
|
Consolidate the actual copying of a ucall struct from guest=>host into
the common get_ucall(). Return a host virtual address instead of a guest
virtual address even though the addr_gva2hva() part could be moved to
get_ucall() too. Conceptually, get_ucall() is invoked from the host and
should return a host virtual address (and returning NULL for "nothing to
see here" is far superior to returning 0).
Use pointer shenanigans instead of an unnecessary bounce buffer when the
caller of get_ucall() provides a valid pointer.
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Tested-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006003409.649993-3-seanjc@google.com
|
|
Make ucall() a common helper that populates struct ucall, and only calls
into arch code to make the actually call out to userspace.
Rename all arch-specific helpers to make it clear they're arch-specific,
and to avoid collisions with common helpers (one more on its way...)
Add WRITE_ONCE() to stores in ucall() code (as already done to aarch64
code in commit 9e2f6498efbb ("selftests: KVM: Handle compiler
optimizations in ucall")) to prevent clang optimizations breaking ucalls.
Cc: Colton Lewis <coltonlewis@google.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Tested-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006003409.649993-2-seanjc@google.com
|
|
Automatically disable single-step when the guest reaches the end of the
verified section instead of using an explicit ucall() to ask userspace to
disable single-step. An upcoming change to implement a pool-based scheme
for ucall() will add an atomic operation (bit test and set) in the guest
ucall code, and if the compiler generate "old school" atomics, e.g.
40e57c: c85f7c20 ldxr x0, [x1]
40e580: aa100011 orr x17, x0, x16
40e584: c80ffc31 stlxr w15, x17, [x1]
40e588: 35ffffaf cbnz w15, 40e57c <__aarch64_ldset8_sync+0x1c>
the guest will hang as the local exclusive monitor is reset by eret,
i.e. the stlxr will always fail due to the debug exception taken to EL2.
Link: https://lore.kernel.org/all/20221006003409.649993-8-seanjc@google.com
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221117002350.2178351-3-seanjc@google.com
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Disable single-step by setting debug.control to KVM_GUESTDBG_ENABLE,
not to SINGLE_STEP_DISABLE. The latter is an arbitrary test enum that
just happens to have the same value as KVM_GUESTDBG_ENABLE, and so
effectively disables single-step debug.
No functional change intended.
Cc: Reiji Watanabe <reijiw@google.com>
Fixes: b18e4d4aebdd ("KVM: arm64: selftests: Add a test case for KVM_GUESTDBG_SINGLESTEP")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221117002350.2178351-2-seanjc@google.com
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Replace the perf_test_ prefix on symbol names with memstress_ to match
the new file name.
"memstress" better describes the functionality proveded by this library,
which is to provide functionality for creating and running a VM that
stresses VM memory by reading and writing to guest memory on all vCPUs
in parallel.
"memstress" also contains the same number of chracters as "perf_test",
making it a drop-in replacement in symbols, e.g. function names, without
impacting line lengths. Also the lack of underscore between "mem" and
"stress" makes it clear "memstress" is a noun.
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221012165729.3505266-4-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Rename the local variables "pta" (which is short for perf_test_args) for
args. "pta" is not an obvious acronym and using "args" mirrors
"vcpu_args".
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221012165729.3505266-3-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Rename the perf_test_util.[ch] files to memstress.[ch]. Symbols are
renamed in the following commit to reduce the amount of churn here in
hopes of playiing nice with git's file rename detection.
The name "memstress" was chosen to better describe the functionality
proveded by this library, which is to create and run a VM that
reads/writes to guest memory on all vCPUs in parallel.
"memstress" also contains the same number of chracters as "perf_test",
making it a drop-in replacement in symbols, e.g. function names, without
impacting line lengths. Also the lack of underscore between "mem" and
"stress" makes it clear "memstress" is a noun.
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221012165729.3505266-2-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Create the ability to randomize page access order with the -a
argument. This includes the possibility that the same pages may be hit
multiple times during an iteration or not at all.
Population has random access as false to ensure all pages will be
touched by population and avoid page faults in late dirty memory that
would pollute the test results.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20221107182208.479157-5-coltonlewis@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Randomize which pages are written vs read using the random number
generator.
Change the variable wr_fract and associated function calls to
write_percent that now operates as a percentage from 0 to 100 where X
means each page has an X% chance of being written. Change the -f
argument to -w to reflect the new variable semantics. Keep the same
default of 100% writes.
Population always uses 100% writes to ensure all memory is actually
populated and not just mapped to the zero page. The prevents expensive
copy-on-write faults from occurring during the dirty memory iterations
below, which would pollute the performance results.
Each vCPU calculates its own random seed by adding its index to the
seed provided.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20221107182208.479157-4-coltonlewis@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Create a -r argument to specify a random seed. If no argument is
provided, the seed defaults to 1. The random seed is set with
perf_test_set_random_seed() and must be set before guest_code runs to
apply.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20221107182208.479157-3-coltonlewis@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Implement random number generator for guest code to randomize parts
of the test, making it less predictable and a more accurate reflection
of reality.
The random number generator chosen is the Park-Miller Linear
Congruential Generator, a fancy name for a basic and well-understood
random number generator entirely sufficient for this purpose.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20221107182208.479157-2-coltonlewis@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a command line option, -c, to pin vCPUs to physical CPUs (pCPUs),
i.e. to force vCPUs to run on specific pCPUs.
Requirement to implement this feature came in discussion on the patch
"Make page tables for eager page splitting NUMA aware"
https://lore.kernel.org/lkml/YuhPT2drgqL+osLl@google.com/
This feature is useful as it provides a way to analyze performance based
on the vCPUs and dirty log worker locations, like on the different NUMA
nodes or on the same NUMA nodes.
To keep things simple, implementation is intentionally very limited,
either all of the vCPUs will be pinned followed by an optional main
thread or nothing will be pinned.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Suggested-by: David Matlack <dmatlack@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221103191719.1559407-8-vipinsh@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Many KVM selftests take command line arguments which are supposed to be
positive (>0) or non-negative (>=0). Some tests do these validation and
some missed adding the check.
Add atoi_positive() and atoi_non_negative() to validate inputs in
selftests before proceeding to use those values.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221103191719.1559407-7-vipinsh@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Change test args memslot_modification_delay and nr_memslot_modifications
to delay and nr_iterations for simplicity.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221103191719.1559407-6-vipinsh@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Replace size_1gb defined in max_guest_memory_test.c with the SZ_1G,
SZ_2G and SZ_4G from linux/sizes.h header file.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221103191719.1559407-5-vipinsh@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
atoi() doesn't detect errors. There is no way to know that a 0 return
is correct conversion or due to an error.
Introduce atoi_paranoid() to detect errors and provide correct
conversion. Replace all atoi() calls with atoi_paranoid().
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Suggested-by: David Matlack <dmatlack@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221103191719.1559407-4-vipinsh@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
dirty_log_perf_test
There are 13 command line options and they are not in any order. Put
them in alphabetical order to make it easy to add new options.
No functional change intended.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221103191719.1559407-3-vipinsh@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
dirty_log_perf_test
Passing -e option (Run VCPUs while dirty logging is being disabled) in
dirty_log_perf_test also unintentionally enables -g (Do not enable
KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2). Add break between two switch case
logic.
Fixes: cfe12e64b065 ("KVM: selftests: Add an option to run vCPUs while disabling dirty logging")
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221103191719.1559407-2-vipinsh@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add some mix of tests into page_fault_test: memory regions with all the
pairwise combinations of read-only, userfaultfd, and dirty-logging. For
example, writing into a read-only region which has a hole handled with
userfaultfd.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221017195834.2295901-15-ricarkol@google.com
|
|
Add some readonly memslot tests into page_fault_test. Mark the data and/or
page-table memory regions as readonly, perform some accesses, and check
that the right fault is triggered when expected (e.g., a store with no
write-back should lead to an mmio exit).
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221017195834.2295901-14-ricarkol@google.com
|
|
Add some dirty logging tests into page_fault_test. Mark the data and/or
page-table memory regions for dirty logging, perform some accesses, and
check that the dirty log bits are set or clean when expected.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221017195834.2295901-13-ricarkol@google.com
|
|
Add some userfaultfd tests into page_fault_test. Punch holes into the
data and/or page-table memslots, perform some accesses, and check that
the faults are taken (or not taken) when expected.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221017195834.2295901-12-ricarkol@google.com
|
|
Add a new test for stage 2 faults when using different combinations of
guest accesses (e.g., write, S1PTW), backing source type (e.g., anon)
and types of faults (e.g., read on hugetlbfs with a hole). The next
commits will add different handling methods and more faults (e.g., uffd
and dirty logging). This first commit starts by adding two sanity checks
for all types of accesses: AF setting by the hw, and accessing memslots
with holes.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221017195834.2295901-11-ricarkol@google.com
|
|
allocations
Now that kvm_vm allows specifying different memslots for code, page tables,
and data, use the appropriate memslot when making allocations in
common/libraty code. Change them accordingly:
- code (allocated by lib/elf) use the CODE memslot
- stacks, exception tables, and other core data pages (like the TSS in x86)
use the DATA memslot
- page tables and the PGD use the PT memslot
- test data (anything allocated with vm_vaddr_alloc()) uses the TEST_DATA
memslot
No functional change intended. All allocators keep using memslot #0.
Cc: Sean Christopherson <seanjc@google.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221017195834.2295901-10-ricarkol@google.com
|
|
Refactor virt_arch_pgd_alloc() and vm_vaddr_alloc() in both RISC-V and
aarch64 to fix the alignment of parameters in a couple of calls. This will
make it easier to fix the alignment in a future commit that adds an extra
parameter (that happens to be very long).
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221017195834.2295901-9-ricarkol@google.com
|
|
The vm_create() helpers are hardcoded to place most page types (code,
page-tables, stacks, etc) in the same memslot #0, and always backed with
anonymous 4K. There are a couple of issues with that. First, tests
willing to differ a bit, like placing page-tables in a different backing
source type must replicate much of what's already done by the vm_create()
functions. Second, the hardcoded assumption of memslot #0 holding most
things is spread everywhere; this makes it very hard to change.
Fix the above issues by having selftests specify how they want memory to be
laid out. Start by changing ____vm_create() to not create memslot #0; a
test (to come) will specify all memslots used by the VM. Then, add the
vm->memslots[] array to specify the right memslot for different memory
allocators, e.g.,: lib/elf should use the vm->[MEM_REGION_CODE] memslot.
This will be used as a way to specify the page-tables memslots (to be
backed by huge pages for example).
There is no functional change intended. The current commit lays out memory
exactly as before. A future commit will change the allocators to get the
region they should be using, e.g.,: like the page table allocators using
the pt memslot.
Cc: Sean Christopherson <seanjc@google.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221017195834.2295901-8-ricarkol@google.com
|
|
Add the backing_src_type into struct userspace_mem_region. This struct
already stores a lot of info about memory regions, except the backing
source type. This info will be used by a future commit in order to
determine the method for punching a hole.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221017195834.2295901-7-ricarkol@google.com
|
|
Define macros for memory type indexes and construct DEFAULT_MAIR_EL1
with macros from asm/sysreg.h. The index macros can then be used when
constructing PTEs (instead of using raw numbers).
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221017195834.2295901-5-ricarkol@google.com
|
|
Deleting a memslot (when freeing a VM) is not closing the backing fd,
nor it's unmapping the alias mapping. Fix by adding the missing close
and munmap.
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221017195834.2295901-4-ricarkol@google.com
|
|
Add a library function to get the PTE (a host virtual address) of a
given GVA. This will be used in a future commit by a test to clear and
check the access flag of a particular page.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221017195834.2295901-3-ricarkol@google.com
|
|
Move the generic userfaultfd code out of demand_paging_test.c into a
common library, userfaultfd_util. This library consists of a setup and a
stop function. The setup function starts a thread for handling page
faults using the handler callback function. This setup returns a
uffd_desc object which is then used in the stop function (to wait and
destroy the threads).
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221017195834.2295901-2-ricarkol@google.com
|
|
Currently, the debug-exceptions test always uses only
{break,watch}point#0 and the highest numbered context-aware
breakpoint. Modify the test to use all {break,watch}points and
context-aware breakpoints supported on the system.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020054202.2119018-10-reijiw@google.com
|
|
Currently, the debug-exceptions test doesn't have a test case for
a linked watchpoint. Add a test case for the linked watchpoint to
the test. The new test case uses the highest numbered context-aware
breakpoint (for Context ID match), and the watchpoint#0, which is
linked to the context-aware breakpoint.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020054202.2119018-9-reijiw@google.com
|
|
Currently, the debug-exceptions test doesn't have a test case for
a linked breakpoint. Add a test case for the linked breakpoint to
the test. The new test case uses a pair of breakpoints. One is the
higiest numbered context-aware breakpoint (for Context ID match),
and the other one is the breakpoint#0 (for Address Match), which
is linked to the context-aware breakpoint.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020054202.2119018-8-reijiw@google.com
|
|
Change debug_version() to take the ID_AA64DFR0_EL1 value instead of
vcpu as an argument, and change its callsite to read ID_AA64DFR0_EL1
(and pass it to debug_version()).
Subsequent patches will reuse the register value in the callsite.
No functional change intended.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020054202.2119018-7-reijiw@google.com
|
|
Currently, debug-exceptions test unnecessarily tracks some test stages
using GUEST_SYNC(). The code for it needs to be updated as test cases
are added or removed. Stop doing the unnecessary stage tracking,
as they are not so useful and are a bit pain to maintain.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020054202.2119018-6-reijiw@google.com
|
|
Add helpers to enable breakpoint and watchpoint exceptions.
No functional change intended.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020054202.2119018-5-reijiw@google.com
|
|
Remove the hard-coded {break,watch}point #0 from the guest_code() in
debug-exceptions to allow {break,watch}point number to be specified.
Change reset_debug_state() to zeroing all dbg{b,w}{c,v}r_el0 registers
so that guest_code() can use the function to reset those registers
even when non-zero {break,watch}points are specified for guest_code().
Subsequent patches will add test cases for non-zero {break,watch}points.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020054202.2119018-4-reijiw@google.com
|
|
Introduce helpers in the debug-exceptions test to write to
dbg{b,w}{c,v}r registers. Those helpers will be useful for
test cases that will be added to the test in subsequent patches.
No functional change intended.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020054202.2119018-3-reijiw@google.com
|
|
Use FIELD_GET() macro to extract ID register fields for existing
aarch64 selftests code. No functional change intended.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020054202.2119018-2-reijiw@google.com
|
|
The memory area in each slot should be aligned to host page size.
Otherwise, the test will fail. For example, the following command
fails with the following messages with 64KB-page-size-host and
4KB-pae-size-guest. It's not user friendly to abort the test.
Lets do something to report the optimal memory slots, instead of
failing the test.
# ./memslot_perf_test -v -s 1000
Number of memory slots: 999
Testing map performance with 1 runs, 5 seconds each
Adding slots 1..999, each slot with 8 pages + 216 extra pages last
==== Test Assertion Failure ====
lib/kvm_util.c:824: vm_adjust_num_guest_pages(vm->mode, npages) == npages
pid=19872 tid=19872 errno=0 - Success
1 0x00000000004065b3: vm_userspace_mem_region_add at kvm_util.c:822
2 0x0000000000401d6b: prepare_vm at memslot_perf_test.c:273
3 (inlined by) test_execute at memslot_perf_test.c:756
4 (inlined by) test_loop at memslot_perf_test.c:994
5 (inlined by) main at memslot_perf_test.c:1073
6 0x0000ffff7ebb4383: ?? ??:0
7 0x00000000004021ff: _start at :?
Number of guest pages is not compatible with the host. Try npages=16
Report the optimal memory slots instead of failing the test when
the memory area in each slot isn't aligned to host page size. With
this applied, the optimal memory slots is reported.
# ./memslot_perf_test -v -s 1000
Number of memory slots: 999
Testing map performance with 1 runs, 5 seconds each
Memslot count too high for this test, decrease the cap (max is 514)
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020071209.559062-7-gshan@redhat.com
|
|
The addresses and sizes passed to vm_userspace_mem_region_add() and
madvise() should be aligned to host page size, which can be 64KB on
aarch64. So it's wrong by passing additional fixed 4KB memory area
to various tests.
Fix it by passing additional fixed 64KB memory area to various tests.
We also add checks to ensure that none of host/guest page size exceeds
64KB. MEM_TEST_MOVE_SIZE is fixed up to 192KB either.
With this, the following command works fine on 64KB-page-size-host and
4KB-page-size-guest.
# ./memslot_perf_test -v -s 512
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020071209.559062-6-gshan@redhat.com
|
|
The test case is obviously broken on aarch64 because non-4KB guest
page size is supported. The guest page size on aarch64 could be 4KB,
16KB or 64KB.
This supports variable guest page size, mostly for aarch64.
- The host determines the guest page size when virtual machine is
created. The value is also passed to guest through the synchronization
area.
- The number of guest pages are unknown until the virtual machine
is to be created. So all the related macros are dropped. Instead,
their values are dynamically calculated based on the guest page
size.
- The static checks on memory sizes and pages becomes dependent
on guest page size, which is unknown until the virtual machine
is about to be created. So all the static checks are converted
to dynamic checks, done in check_memory_sizes().
- As the address passed to madvise() should be aligned to host page,
the size of page chunk is automatically selected, other than one
page.
- MEM_TEST_MOVE_SIZE has fixed and non-working 64KB. It will be
consolidated in next patch. However, the comments about how
it's calculated has been correct.
- All other changes included in this patch are almost mechanical
replacing '4096' with 'guest_page_size'.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020071209.559062-5-gshan@redhat.com
|
|
prepare_vm() is called in every iteration and run. The allowed memory
slots (KVM_CAP_NR_MEMSLOTS) are probed for multiple times. It's not
free and unnecessary.
Move the probing logic for the allowed memory slots to parse_args()
for once, which is upper layer of prepare_vm().
No functional change intended.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020071209.559062-4-gshan@redhat.com
|
|
There are two loops in prepare_vm(), which have different conditions.
'slot' is treated as meory slot index in the first loop, but index of
the host virtual address array in the second loop. It makes it a bit
hard to understand the code.
Change the usage of 'slot' in the second loop, to treat it as the
memory slot index either.
No functional change intended.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020071209.559062-3-gshan@redhat.com
|
|
In prepare_vm(), 'data->nslots' is assigned with 'max_mem_slots - 1'
at the beginning, meaning they are interchangeable.
Use 'data->nslots' isntead of 'max_mem_slots - 1'. With this, it
becomes easier to move the logic of probing number of slots into
upper layer in subsequent patches.
No functional change intended.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020071209.559062-2-gshan@redhat.com
|
|
In the dirty ring case, we rely on vcpu exit due to full dirty ring
state. On ARM64 system, there are 4096 host pages when the host
page size is 64KB. In this case, the vcpu never exits due to the
full dirty ring state. The similar case is 4KB page size on host
and 64KB page size on guest. The vcpu corrupts same set of host
pages, but the dirty page information isn't collected in the main
thread. This leads to infinite loop as the following log shows.
# ./dirty_log_test -M dirty-ring -c 65536 -m 5
Setting log mode to: 'dirty-ring'
Test iterations: 32, interval: 10 (ms)
Testing guest mode: PA-bits:40, VA-bits:48, 4K pages
guest physical test memory offset: 0xffbffe0000
vcpu stops because vcpu is kicked out...
Notifying vcpu to continue
vcpu continues now.
Iteration 1 collected 576 pages
<No more output afterwards>
Fix the issue by automatically choosing the best dirty ring size,
to ensure vcpu exit due to full dirty ring state. The option '-c'
becomes a hint to the dirty ring count, instead of the value of it.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110104914.31280-8-gshan@redhat.com
|
|
There are two states, which need to be cleared before next mode
is executed. Otherwise, we will hit failure as the following messages
indicate.
- The variable 'dirty_ring_vcpu_ring_full' shared by main and vcpu
thread. It's indicating if the vcpu exit due to full ring buffer.
The value can be carried from previous mode (VM_MODE_P40V48_4K) to
current one (VM_MODE_P40V48_64K) when VM_MODE_P40V48_16K isn't
supported.
- The current ring buffer index needs to be reset before next mode
(VM_MODE_P40V48_64K) is executed. Otherwise, the stale value is
carried from previous mode (VM_MODE_P40V48_4K).
# ./dirty_log_test -M dirty-ring
Setting log mode to: 'dirty-ring'
Test iterations: 32, interval: 10 (ms)
Testing guest mode: PA-bits:40, VA-bits:48, 4K pages
guest physical test memory offset: 0xffbfffc000
:
Dirtied 995328 pages
Total bits checked: dirty (1012434), clear (7114123), track_next (966700)
Testing guest mode: PA-bits:40, VA-bits:48, 64K pages
guest physical test memory offset: 0xffbffc0000
vcpu stops because vcpu is kicked out...
vcpu continues now.
Notifying vcpu to continue
Iteration 1 collected 0 pages
vcpu stops because dirty ring is full...
vcpu continues now.
vcpu stops because dirty ring is full...
vcpu continues now.
vcpu stops because dirty ring is full...
==== Test Assertion Failure ====
dirty_log_test.c:369: cleared == count
pid=10541 tid=10541 errno=22 - Invalid argument
1 0x0000000000403087: dirty_ring_collect_dirty_pages at dirty_log_test.c:369
2 0x0000000000402a0b: log_mode_collect_dirty_pages at dirty_log_test.c:492
3 (inlined by) run_test at dirty_log_test.c:795
4 (inlined by) run_test at dirty_log_test.c:705
5 0x0000000000403a37: for_each_guest_mode at guest_modes.c:100
6 0x0000000000401ccf: main at dirty_log_test.c:938
7 0x0000ffff9ecd279b: ?? ??:0
8 0x0000ffff9ecd286b: ?? ??:0
9 0x0000000000401def: _start at ??:?
Reset dirty pages (0) mismatch with collected (35566)
Fix the issues by clearing 'dirty_ring_vcpu_ring_full' and the ring
buffer index before next new mode is to be executed.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110104914.31280-7-gshan@redhat.com
|
|
In vcpu_map_dirty_ring(), the guest's page size is used to figure out
the offset in the virtual area. It works fine when we have same page
sizes on host and guest. However, it fails when the page sizes on host
and guest are different on arm64, like below error messages indicates.
# ./dirty_log_test -M dirty-ring -m 7
Setting log mode to: 'dirty-ring'
Test iterations: 32, interval: 10 (ms)
Testing guest mode: PA-bits:40, VA-bits:48, 64K pages
guest physical test memory offset: 0xffbffc0000
vcpu stops because vcpu is kicked out...
Notifying vcpu to continue
vcpu continues now.
==== Test Assertion Failure ====
lib/kvm_util.c:1477: addr == MAP_FAILED
pid=9000 tid=9000 errno=0 - Success
1 0x0000000000405f5b: vcpu_map_dirty_ring at kvm_util.c:1477
2 0x0000000000402ebb: dirty_ring_collect_dirty_pages at dirty_log_test.c:349
3 0x00000000004029b3: log_mode_collect_dirty_pages at dirty_log_test.c:478
4 (inlined by) run_test at dirty_log_test.c:778
5 (inlined by) run_test at dirty_log_test.c:691
6 0x0000000000403a57: for_each_guest_mode at guest_modes.c:105
7 0x0000000000401ccf: main at dirty_log_test.c:921
8 0x0000ffffb06ec79b: ?? ??:0
9 0x0000ffffb06ec86b: ?? ??:0
10 0x0000000000401def: _start at ??:?
Dirty ring mapped private
Fix the issue by using host's page size to map the ring buffer.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110104914.31280-6-gshan@redhat.com
|
|
When using the flags in KVM_X86_SET_MSR_FILTER and
KVM_CAP_X86_USER_SPACE_MSR it is expected that an attempt to write to
any of the unused bits will fail. Add testing to walk over every bit
in each of the flag fields in MSR filtering and MSR exiting to verify
that unused bits return and error and used bits, i.e. valid bits,
succeed.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20220921151525.904162-6-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
