| Age | Commit message (Collapse) | Author |
|---|
|
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20250617032103.1725040-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add Tegra264 AHUB support with following changes:
- Update Tegra264 IP instances: DMIC(2), DSPK(1), AMX(6), ADX(6), I2S(8).
- Update register offsets for Tegra264.
- Add soc_data for Tegra264 chip-specific variations.
- Increase channels_max to 32 for Tegra264 DAIs.
Signed-off-by: Sheetal <sheetal@nvidia.com>
Link: https://patch.msgid.link/20250512051747.1026770-11-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In tegra_ahub_probe(), check the result of function
of_device_get_match_data(), return an error code in case it fails.
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Link: https://patch.msgid.link/20250513123744.3041724-1-ruc_gongyuanjun@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together
with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-84-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.12
This is a very large set of changes, almost all in drivers rather than
the core. Even with the addition of several quite large drivers the
overall diffstat is negative thanks to the removal of some old Intel
board support which has been obsoleted by the AVS driver, helped a bit
by some factoring out into helpers (especially around the Soundwire
machine drivers for x86).
Highlights include:
- More simplifications and cleanups throughout the subsystem from
Morimoto-san.
- Extensive cleanups and refactoring of the Soundwire drivers to make
better use of helpers.
- Removal of Intel machine support obsoleted by the AVS driver.
- Lots of DT schema conversions.
- Machine support for many AMD and Intel x86 platforms.
- Support for AMD ACP 7.1, Mediatek MT6367 and MT8365, Realtek RTL1320
SoundWire and rev C, and Texas Instruments TAS2563
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all drivers below sound/soc to use .remove(), with the eventual
goal to drop struct platform_driver::remove_new(). As .remove() and
.remove_new() have the same prototypes, conversion is done by just
changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20240909151230.909818-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When Tegra audio drivers are built as part of the kernel image,
TIMEOUT_ERR is observed from cbb-fabric. Following is seen on
Jetson AGX Orin during boot:
[ 8.012482] **************************************
[ 8.017423] CPU:0, Error:cbb-fabric, Errmon:2
[ 8.021922] Error Code : TIMEOUT_ERR
[ 8.025966] Overflow : Multiple TIMEOUT_ERR
[ 8.030644]
[ 8.032175] Error Code : TIMEOUT_ERR
[ 8.036217] MASTER_ID : CCPLEX
[ 8.039722] Address : 0x290a0a8
[ 8.043318] Cache : 0x1 -- Bufferable
[ 8.047630] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access
[ 8.054628] Access_Type : Write
[ 8.106130] WARNING: CPU: 0 PID: 124 at drivers/soc/tegra/cbb/tegra234-cbb.c:604 tegra234_cbb_isr+0x134/0x178
[ 8.240602] Call trace:
[ 8.243126] tegra234_cbb_isr+0x134/0x178
[ 8.247261] __handle_irq_event_percpu+0x60/0x238
[ 8.252132] handle_irq_event+0x54/0xb8
These errors happen when MVC device, which is a child of AHUB
device, tries to access its device registers. This happens as
part of call tegra210_mvc_reset_vol_settings() in MVC device
probe().
The root cause of this problem is, the child MVC device gets
probed before the AHUB clock gets enabled. The AHUB clock is
enabled in runtime PM resume of parent AHUB device and due to
the wrong sequence of pm_runtime_enable() in AHUB driver,
runtime PM resume doesn't happen for AHUB device when MVC makes
register access.
Fix this by calling pm_runtime_enable() for parent AHUB device
before of_platform_populate() in AHUB driver. This ensures that
clock becomes available when MVC makes register access.
Fixes: 16e1bcc2caf4 ("ASoC: tegra: Add Tegra210 based AHUB driver")
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Signed-off-by: Ritu Chaudhary <rituc@nvidia.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://patch.msgid.link/20240823144342.4123814-3-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove stale comments in AHUB driver which is related to DAPM
widgets and routes. This is misleading otherwise.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/Message-Id: <1687433656-7892-7-git-send-email-spujar@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-152-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add AHUB routes for OPE module. The OPE module can be plugged into audio
path as per the need. The routing controls can be used to setup the audio
path with OPE similar to the already existing routes. The support is added
on Tegra210 and later Tegra SoCs where OPE module is present.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1654238172-16293-4-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add AHUB routes for ASRC module. The ASRC module can be plugged into audio
path as per the need. The routing controls can be used to setup the audio
path with ASRC similar to the already existing routes. The routes are added
to Tegra186 and later Tegra SoCs where ASRC module is present.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1648735412-32220-4-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The register offsets of switches connecting various AHUB internal
modules have changed from previous chip. Address this variation by
making use of Tegra234 based compatible.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1643373476-8538-2-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The kcontrol put callback is expected to return 1 when there is change
in HW or when the update is acknowledged by driver. This would ensure
that change notifications are sent to subscribed applications. Update
the AHUB driver accordingly.
Fixes: 16e1bcc2caf4 ("ASoC: tegra: Add Tegra210 based AHUB driver")
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Suggested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/1637219231-406-12-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add routing support for following modules of AHUB:
* SFC (Sampling Frequency Converter)
* MVC (Master Volume Control)
* AMX (Audio Multiplexer)
* ADX (Audio Demultiplexer)
* Mixer
These modules can be plugged into audio path as per the need using
routing controls similar to the already existing routes to I/O modules
such as I2S, DMIC and DSPK.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1631551342-25469-6-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix trivial compile warnings wrt unused functions by adding
__maybe_unused prefix:
sound/soc/tegra/tegra210_ahub.c:567:12: warning: 'tegra_ahub_runtime_suspend' defined but not used [-Wunused-function]
sound/soc/tegra/tegra210_ahub.c:579:12: warning: 'tegra_ahub_runtime_resume' defined but not used [-Wunused-function]
Fixes: 16e1bcc2caf4 ("ASoC: tegra: Add Tegra210 based AHUB driver")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200803141850.23713-4-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Audio Hub (AHUB) comprises a collection of hardware accelerators for
audio pre/post-processing and a programmable full crossbar (XBAR) for
routing audio data across these accelerators in time and in parallel.
AHUB supports multiple interfaces to I2S, DSPK, DMIC etc., XBAR is a
switch used to configure or modify audio routing between HW accelerators
present inside AHUB.
This patch registers AHUB component with ASoC framework. The component
driver exposes DAPM widgets, routes and kcontrols for the device. The DAI
driver exposes AHUB interfaces, which can be used to connect different
components in the ASoC layer. Currently the driver takes care of XBAR
programming to allow audio data flow through various clients of the AHUB.
Makefile and Kconfig support is added to allow to build the driver. The
AHUB component can be enabled in the DT via below compatible bindings.
- "nvidia,tegra210-ahub" for Tegra210
- "nvidia,tegra186-ahub" for Tegra186 and Tegra194
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1595134890-16470-6-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
