| Age | Commit message (Collapse) | Author |
|---|
|
The check is performed in prepare-step, that is dpcm_fe_dai_prepare()
but that is very late - code operates on invalid configuration from
dpcm_fe_dai_open() till it gets there. Relocate the check to the
open-step to avoid any invalid scenarios.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250530141231.2943351-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Issue:
When multiple audio streams share a common BE DAI, the BE DAI
widget can be powered up before its hardware parameters are configured.
This incorrect sequence leads to intermittent pcm_write errors.
For example, the below Tegra use-case throws an error:
aplay(2 streams) -> AMX(mux) -> ADX(demux) -> arecord(2 streams),
here, 'AMX TX' and 'ADX RX' are common BE DAIs.
For above usecase when failure happens below sequence is observed:
aplay(1) FE open()
- BE DAI callbacks added to the list
- BE DAI state = SND_SOC_DPCM_STATE_OPEN
aplay(2) FE open()
- BE DAI callbacks are not added to the list as the state is
already SND_SOC_DPCM_STATE_OPEN during aplay(1) FE open().
aplay(2) FE hw_params()
- BE DAI hw_params() callback ignored
aplay(2) FE prepare()
- Widget is powered ON without BE DAI hw_params() call
aplay(1) FE hw_params()
- BE DAI hw_params() is now called
Fix:
Add BE DAIs in the list if its state is either SND_SOC_DPCM_STATE_OPEN
or SND_SOC_DPCM_STATE_HW_PARAMS as well.
It ensures the widget is powered ON after BE DAI hw_params() callback.
Fixes: 0c25db3f7621 ("ASoC: soc-pcm: Don't reconnect an already active BE")
Signed-off-by: Sheetal <sheetal@nvidia.com>
Link: https://patch.msgid.link/20250404105953.2784819-1-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have similar but different function names
snd_soc_dpcm_fe_can_xxx()
snd_soc_dpcm_be_can_xxx()
snd_soc_dpcm_can_be_xxx()
~~~~~~
Let's unified these to can_xx
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87plip7ie4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Adds snd_soc_dai_mute_is_ctrled_at_trigger() to judge
dai->driver->ops->mute_unmute_on_trigger flags
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/871pva6hs2.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We already have dpcm_state_string(). Let's reuse it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87y0xi52vx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
format() and subformat() should be handled in the same time, no need to
have each functions. Let's merge these
soc_pcm_hw_update_format()
soc_pcm_hw_update_subformat()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Cezary Rojewski <cezary.rojewski@intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/87v7soz664.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dpcm_fe_dai_do_trigger() has big duplicate code. Let's makes code
more simple.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87h64zyjyd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
DPCM is already difficult to read, but now dpcm_dai_trigger_fe_be() even
difficult to read.
static int dpcm_dai_trigger_fe_be(.., fe_first)
{
^ if (fe_first) {
(A) ...
|(x) goto end;
v }
^
(B) ...
v
end:
return ...
}
It want to switch function call order by using "fe_first" for fe->be
order part (A), or be->fe order part (B). But the code is using "goto"
in last of (A) (=x).
Just use "if..else" for (A) (B) is easy to read and understand what it
want to do.
static int dpcm_dai_trigger_fe_be(.., fe_first)
{
^ if (fe_first) {
(A) ...
v }
^ else {
(B) ...
v }
return ...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ikpfyjyo.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dpcm_process_paths() will call dpcm_add_paths() (A) or
dpcm_prune_paths() (B)
dpcm_process_paths(..., new)
{
if (new)
(A) return dpcm_add_paths(...);
else
(B) return dpcm_prune_paths(...);
}
but the user who need to call dpcm_prune_paths() (B) is only
soc_dpcm_fe_runtime_update(), all other user want to call is
dpcm_add_paths() (A). We don't need to have confusing
dpcm_process_paths(). Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87jz9vyjyu.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We can get struct snd_soc_pcm_runtime from struct snd_pcm_substream,
no need to have both as function parameter. Let's shrink it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87mseryk5l.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
No one uses dpcm_dapm_stream_event() return value, and it always
return 0. Let's makes it void.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87seojyk6m.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
All dpcm from for_each_dpcm_be(fe, ...) loop has same fe
(that is the reason to connected to this list). We don't need to
check (dpcm->fe == fe) in this loop.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87wmdvyk87.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Many functions uses below style for error return
dev_err(dev, "message");
return -Exxxx;
We can merge these into snd_soc_ret() which can use same error
format. Let's cleaup code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87cyfx2qlo.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Each soc-xxx.c is using own snd_xxx_ret(), but we want to share it.
Let's add common snd_soc_ret() for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87frkt2qlx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
commit 1f5664351410 ("ASoC: lower "no backend DAIs enabled for ... Port"
log severity") ignores -EINVAL error message on common soc_pcm_ret().
It is used from many functions, ignoring -EINVAL is over-kill.
The reason why -EINVAL was ignored was it really should only be used
upon invalid parameters coming from userspace and in that case we don't
want to log an error since we do not want to give userspace a way to do
a denial-of-service attack on the syslog / diskspace.
So don't use soc_pcm_ret() on .prepare callback is better idea.
Link: https://lore.kernel.org/r/87v7vptzap.wl-kuninori.morimoto.gx@renesas.com
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87bjxg8jju.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_soc_dai has rate/channels/sample_bits parameter, but it is only valid
if symmetry is being enforced by symmetric_xxx flag on driver.
It is very difficult to know about it from current naming, and easy to
misunderstand it. add symmetric_ prefix for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87zfmd8bnf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
some functions had parameter like below
xxx(..., rtd, ..., id);
This "id" is rtd->id. We don't need to have "id" on each functions
because we can get it from "rtd". Let's cleanup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87plnqb84p.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current rtd has "num". It sounds/looks like size of rtd or something,
but it will be mainly used at snd_pcm_new() as "device index".
This naming is confusable. Let's rename it to "id"
Some drivers are using rtd->num, so let's keep it so far, and remove
it if all user was switched.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87zfmub85z.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
DPCM and non-DPCM validation check are very similar. The big difference
is that DPCM doesn't check Codec validation. This is historical reason.
It should be checked, but it breaks existing driver/behavior.
Anyway, if we uses dummy DAI as Codec when DPCM case, there is no
difference between DPCM and non-DPCM. Let's merge these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/8734kq9vgq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dpcm_xxx flags are no longer needed. Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/875xpm9vh3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_soc_set_runtime_hwparams() is now doing very simple things.
We can makes it simply inline function, without having EXPORT_SYMBOL_GPL()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87cyk0eso0.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
No driver is calling snd_soc_dpcm_can_be_xxx() functions. We don't need
to have EXPORT_SYMBOL_GPL() for them. Let's makes it static function.
One note is that snd_soc_dpcm_fe_can_update() is not used in upstream.
Use #if-endif and keep it for future support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87h6b6df7e.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch moves snd_soc_dpcm_can_be_xxx() functions to top of soc-pcm.c
This is prepare for cleanup.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ikvmdf7j.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
availability limition
I have been wondering why DPCM needs special flag (= dpcm_playback/capture)
to use it. Below is the history why it was added to ASoC.
(A) In beginning, there was no dpcm_xxx flag on ASoC.
It checks channels_min for DPCM, same as current non-DPCM.
Let's name it as "validation check" here.
if (rtd->dai_link->dynamic || rtd->dai_link->no_pcm) {
if (cpu_dai->driver->playback.channels_min)
playback = 1;
if (cpu_dai->driver->capture.channels_min)
capture = 1;
(B) commit 1e9de42f4324 ("ASoC: dpcm: Explicitly set BE DAI link supported
stream directions") force to use dpcm_xxx flag on DPCM. According to
this commit log, this is because "Some BE dummy DAI doesn't set
channels_min for playback/capture". But we don't know which DAI is it,
and not know why it can't/don't have channels_min. Let's name it as
"no_chan_DAI" here. According to the code and git-log, it is used as
DCPM-BE and is CPU DAI. I think the correct solution was set
channels_min on "no_chan_DAI" side, not update ASoC framework side. But
everything is under smoke today.
if (rtd->dai_link->dynamic || rtd->dai_link->no_pcm) {
playback = rtd->dai_link->dpcm_playback;
capture = rtd->dai_link->dpcm_capture;
(C) commit 9b5db059366a ("ASoC: soc-pcm: dpcm: Only allow playback/capture
if supported") checks channels_min (= validation check) again. Because
DPCM availability was handled by dpcm_xxx flag at that time, but some
Sound Card set it even though it wasn't available. Clearly there's
a contradiction here. I think correct solution was update Sound Card
side instead of ASoC framework. Sound Card side will be updated to
handle this issue later (commit 25612477d20b ("ASoC: soc-dai: set
dai_link dpcm_ flags with a helper"))
if (rtd->dai_link->dynamic || rtd->dai_link->no_pcm) {
...
playback = rtd->dai_link->dpcm_playback &&
snd_soc_dai_stream_valid(cpu_dai, ...);
capture = rtd->dai_link->dpcm_capture &&
snd_soc_dai_stream_valid(cpu_dai, ...);
This (C) patch should have broken "no_chan_DAI" which doesn't have
channels_min, but there was no such report during this 4 years.
Possibilities case are as follows
- No one is using "no_chan_DAI"
- "no_chan_DAI" is no longer exist : was removed ?
- "no_chan_DAI" is no longer exist : has channels_min ?
Because of these history, this dpcm_xxx is unneeded flag today. But because
we have been used it for 10 years since (B), it may have been used
differently. For example some DAI available both playback/capture, but it
set dpcm_playback flag only, in this case dpcm_xxx flag is used as
availability limitation. We can use playback_only flag instead in this
case, but it is very difficult to find such DAI today.
Let's add grace time to remove dpcm_playback/capture flag.
This patch don't use dpcm_xxx flag anymore, and indicates warning to use
xxx_only flag if both playback/capture were available but using only
one of dpcm_xxx flag, and not using xxx_only flag.
Link: https://lore.kernel.org/r/87edaym2cg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/87seuyaahn.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
soc-pcm.c has snd_soc_dpcm_stream_lock_irqsave_nested() /
snd_soc_dpcm_stream_unlock_irqrestore() helper function,
but it is almost nothing help. It just makes a code complex.
Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87msl6aa2c.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
soc-pcm.c has snd_soc_dpcm_stream_{lock/unlock}_irq() helper function,
but it is almost nothing help. It just makes a code complex.
Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/875xsnll85.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Bespoke trigger support was added when Linux v3.5 by this patch.
commit 07bf84aaf736781a283b1bd36eaa911453b14574
("ASoC: dpcm: Add bespoke trigger()")
test-component driver is using it, but this is because it indicates used
function for debug/trace purpose. Except test-component driver, bespoke
trigger has never been used over 10 years in upstream.
We can re-support it if needed in the future, but let's remove it for now,
because it just noise in upstream.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87v80ewmdi.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We already have snd_pcm_direction_name(). Let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87h6c7k50t.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Returned 'struct snd_soc_pcm_stream' by snd_soc_dai_get_pcm_stream() is
not modified by the users, so it can be changed as pointer to const.
This is a necessary step towards making the 'dai->driver' a pointer to
const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240617-n-asoc-const-auto-selectable-formats-v1-5-8004f346ee38@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
During startup snd_soc_dai_startup() is launched in ascending order and
the exact same thing is done during shutdown procedure. Reverse the
order in the latter so that it is symmetric to the former.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20240426095733.3946951-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When checking whether the power-down delay should be ignored for a specific
PCM runtime, there's no need to keep going through all DAI link components
after any of them is found to be configured to use the power-down delay.
While there, fix a small typo in one of the comment blocks.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://msgid.link/r/90ae761a5b99640ece48363a7099ac2cf402bd37.1712684592.git.dsimic@manjaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.8
This is a relatively quiet release, there's a lot of driver specific
changes and the usual high level of activity in the SOF core but the
one big core change was Mormioto-san's work to support more N:M
CPU:CODEC mapping cases. Highlights include:
- Enhanced support for N:M CPU:CODEC mappings in the core and in
audio-graph-card2.
- Support for falling back to older SOF IPC versions where firmware for
new versions is not available.
- Support for notification of control changes generated by SOF firmware
with IPC4.
- Device tree support for describing parts of the card which can be
active over suspend (for very low power playback or wake word use
cases).
- ACPI parsing support for the ES83xx driver, reducing the number of
quirks neede for x86 systems.
- Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
SM8250, SM8550, SM8650 and X1E80100.
- Removal of Freescale MPC8610 support, the SoC is no longer supported
by Linux.
|
|
Pull CS35L41 codec extension series.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Some components like platforms don't have DAIs. If the active count of
these components is ignored pinctrl may be wrongly selected between
default and sleep state. So need to increment or decrement the active
count for components without DAIs to avoid it.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://msgid.link/r/20231204111532.3165-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Subformat options are ignored when setting up hardware parameters and
assigning PCM stream capabilities. Account for them to allow for
granular format selection.
As there is only one user currently (format S32_LE), subformat is
represented by a simple u32 and stores flags only for that one user
alone. Such approach allows for alloc/free-less code until there are
more users on the horizon.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20231117120610.1755254-4-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Current ASoC CPU:Codec = N:M connection is using connection mapping idea,
but it is used for N < M case only. We want to use it for any case.
By this patch, not only N:M connection, but all existing connection
(1:1, 1:N, N:N) will use same connection mapping. Then, because it will
use default mapping, no conversion patch is needed to exising drivers.
More over, CPU:Codec = N:M (N > M) also supported in the same time.
ch_maps array will has CPU/Codec index by this patch.
Image
CPU0 <---> Codec0
CPU1 <-+-> Codec1
CPU2 <-/
ch_map
ch_map[0].cpu = 0 ch_map[0].codec = 0
ch_map[1].cpu = 1 ch_map[1].codec = 1
ch_map[2].cpu = 2 ch_map[2].codec = 1
Link: https://lore.kernel.org/r/87fs6wuszr.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/878r7yqeo4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/87ttpq4f2c.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A recent change to address pops and clicks with codecs like WSA883X
touched the same code paths as a fix for clearing DAI parameters and
resulted in a bad merge.
Specifically, commit f0220575e65a ("ASoC: soc-dai: add flag to mute and
unmute stream during trigger") made mute at stream close conditional,
while commit 3efcb471f871 ("ASoC: soc-pcm.c: Make sure DAI parameters
cleared if the DAI becomes inactive") moved that same mute call back to
soc_pcm_hw_clean().
Fix up the bad merge by dropping the second mute call from
soc_pcm_clean() and making sure that the call in soc_pcm_hw_clean() is
conditional as intended.
Fixes: bdb7e1922052 ("ASoC: Merge up workaround for CODECs that play noise on stopped stream")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231123091815.21933-1-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This was sent too late to actually make it for v6.6 but was sent against
v6.6 so merge it up here.
|
|
In some setups like Speaker amps which are very sensitive, ex: keeping them
unmute without actual data stream for very short duration results in a
static charge and results in pop and clicks. To minimize this, provide a way
to mute and unmute such codecs during trigger callbacks.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231027105747.32450-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The commit 1da681e52853 ("ASoC: soc-pcm.c: Clear DAIs parameters after
stream_active is updated") tries to make sure DAI parameters can be
cleared properly through moving the cleanup to the place where stream
active status is updated. However, it will cause the cleanup only
happening in soc_pcm_close().
Suppose a case: aplay -Dhw:0 44100.wav 48000.wav. The case calls
soc_pcm_open()->soc_pcm_hw_params()->soc_pcm_hw_free()->
soc_pcm_hw_params()->soc_pcm_hw_free()->soc_pcm_close() in order. The
parameters would be remained in the system even if the playback of
44100.wav is finished.
The case requires us clearing parameters in phase of soc_pcm_hw_free().
However, moving the DAI parameters cleanup back to soc_pcm_hw_free()
has the risk that DAIs parameters never be cleared if there're more
than one stream, see commit 1da681e52853 ("ASoC: soc-pcm.c: Clear DAIs
parameters after stream_active is updated") for more details.
To meet all these requirements, in addition to do DAI parameters
cleanup in soc_pcm_hw_free(), also check it in soc_pcm_close() to make
sure DAI parameters cleared if the DAI becomes inactive.
Fixes: 1da681e52853 ("ASoC: soc-pcm.c: Clear DAIs parameters after stream_active is updated")
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://lore.kernel.org/r/20230920153621.711373-2-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o7i8p8tu.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit ac950278b087 ("ASoC: add N cpus to M codecs dai link support")
added an additional local params in __soc_pcm_hw_params, for the CPU
side of the DAI. The snd_pcm_hw_params struct is pretty large (604
bytes) and keeping two local copies of it can make the stack frame
really large.
It is worth noting the variables are in separate code blocks so for
some optimisation levels in the compiler these will get automatically
combined keeping the stack frame reasonable. But better to manually
combine them to cover all cases.
Add a single local variable for __soc_pcm_hw_params and use in both
loops to shrink the stack frame.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230908085920.2906359-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Back-merge the 6.5-devel branch for the clean patch application for
6.6 and resolving merge conflicts.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Now all ASoC users have been replaced to use the new PCM copy ops,
let's drop the obsoleted copy_user ops and its helper function.
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230815190136.8987-25-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
For following the ALSA PCM core change, a new PCM copy ops is added
toe ASoC component framework: snd_soc_component_driver receives the
copy ops, and snd_soc_pcm_component_copy() helper is provided.
This also fixes a long-standing potential bug where the ASoC driver
covers only copy_user PCM callback and misses the copy from kernel
pointers (such as OSS PCM layer), too.
As of this patch, the old copy_user is still kept, but it'll be
dropped later after all drivers are converted.
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230815190136.8987-19-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
If SNDRV_PCM_IOCTL_PREPARE is called when the mixer settings linking
frontend and backend have not been setup yet this results in
e.g. the following errors getting logged:
[ 43.244549] Baytrail Audio Port: ASoC: no backend DAIs enabled for Baytrail Audio Port
[ 43.244744] Baytrail Audio Port: ASoC: error at dpcm_fe_dai_prepare on Baytrail Audio Port: -22
pipewire triggers this leading to 96 lines getting logged
after the user has logged into a GNOME session.
Change the actual "no backend DAIs enabled for ... Port" error to
dev_err_once() to avoid it getting repeated 48 times. While at it
also improve the error by hinting the user how to fix this.
To not make developing new UCM profiles harder, also log the error
at dev_dbg() level all the time (vs once). So that e.g. dyndbg can
be used to (re)enable the messages.
Also changes _soc_pcm_ret() to not log for -EINVAL errors, to fix
the other error getting logged 48 times. Userspace passing wrong
parameters should not lead to dmesg messages.
Link: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/3407
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230805171435.31696-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
So we can apply the tlv320aic3xxx DT conversion.
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
This patch-set adds new "trigger" starting/stopping method.
|
|
All drivers switch to use generic trigger ordering method.
Let's remove old method.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87legufnyy.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current ASoC is assuming that trigger starting order is
Link -> Component -> DAI as default, and its reverse order for stopping.
But some Driver / Card want to reorder it for some reasons.
We have such flags, but is unbalance like below.
struct snd_soc_component_driver :: start_dma_last
struct snd_soc_dai_link :: stop_dma_first
We want to have more flexible, and more generic method.
This patch adds new snd_soc_trigger_order for start/stop at
component / DAI-link.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r0qmfnzx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
