summaryrefslogtreecommitdiff
path: root/net/wireless
AgeCommit message (Collapse)Author
8 daysMerge tag 'wireless-next-2025-07-24' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== Another wireless update: - rtw89: - STA+P2P concurrency - support for USB devices RTL8851BU/RTL8852BU - ath9k: OF support - ath12k: - more EHT/Wi-Fi 7 features - encapsulation/decapsulation offload - iwlwifi: some FIPS interoperability - brcm80211: support SDIO 43751 device - rt2x00: better DT/OF support - cfg80211/mac80211: - improved S1G support - beacon monitor for MLO * tag 'wireless-next-2025-07-24' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (199 commits) ssb: use new GPIO line value setter callbacks for the second GPIO chip wifi: Fix typos wifi: brcmsmac: Use str_true_false() helper wifi: brcmfmac: fix EXTSAE WPA3 connection failure due to AUTH TX failure wifi: brcm80211: Remove yet more unused functions wifi: brcm80211: Remove more unused functions wifi: brcm80211: Remove unused functions wifi: iwlwifi: Revert "wifi: iwlwifi: remove support of several iwl_ppag_table_cmd versions" wifi: iwlwifi: check validity of the FW API range wifi: iwlwifi: don't export symbols that we shouldn't wifi: iwlwifi: mld: use spec link id and not FW link id wifi: iwlwifi: mld: decode EOF bit for AMPDUs wifi: iwlwifi: Remove support for rx OMI bandwidth reduction wifi: iwlwifi: stop supporting iwl_omi_send_status_notif ver 1 wifi: iwlwifi: remove SC2F firmware support wifi: iwlwifi: mvm: Remove NAN support wifi: iwlwifi: mld: avoid outdated reorder buffer head_sn wifi: iwlwifi: mvm: avoid outdated reorder buffer head_sn wifi: iwlwifi: disable certain features for fips_enabled wifi: iwlwifi: mld: support channel survey collection for ACS scans ... ==================== Link: https://patch.msgid.link/20250724100349.21564-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
11 dayswifi: nl80211: Set num_sub_specs before looping through sub_specsKees Cook
The processing of the struct cfg80211_sar_specs::sub_specs flexible array requires its counter, num_sub_specs, to be assigned before the loop in nl80211_set_sar_specs(). Leave the final assignment after the loop in place in case fewer ended up in the array. Fixes: aa4ec06c455d ("wifi: cfg80211: use __counted_by where appropriate") Signed-off-by: Kees Cook <kees@kernel.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://patch.msgid.link/20250721183125.work.183-kees@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 dayswifi: cfg80211/mac80211: report link ID for unexpected framesMichael-CY Lee
The upper layer may require the link ID to properly handle unexpected frames. For instance, if hostapd, operating as an AP MLD, receives a data frame from a non-associated STA, it must send deauthentication to the link on which the STA is operating. Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com> Reviewed-by: Money Wang <money.wang@mediatek.com> Link: https://patch.msgid.link/20250721065159.1740992-1-michael-cy.lee@mediatek.com [edit commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 dayswifi: cfg80211: reject HTC bit for management framesJohannes Berg
Management frames sent by userspace should never have the order/HTC bit set, reject that. It could also cause some confusion with the length of the buffer and the header so the validation might end up wrong. Link: https://patch.msgid.link/20250718202307.97a0455f0f35.I1805355c7e331352df16611839bc8198c855a33f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-18net: s/dev_get_flags/netif_get_flags/Stanislav Fomichev
Commit cc34acd577f1 ("docs: net: document new locking reality") introduced netif_ vs dev_ function semantics: the former expects locked netdev, the latter takes care of the locking. We don't strictly follow this semantics on either side, but there are more dev_xxx handlers now that don't fit. Rename them to netif_xxx where appropriate. Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250717172333.1288349-6-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-18wifi: cfg80211: Add missing lock in cfg80211_check_and_end_cac()Alexander Wetzel
Callers of wdev_chandef() must hold the wiphy mutex. But the worker cfg80211_propagate_cac_done_wk() never takes the lock. Which triggers the warning below with the mesh_peer_connected_dfs test from hostapd and not (yet) released mac80211 code changes: WARNING: CPU: 0 PID: 495 at net/wireless/chan.c:1552 wdev_chandef+0x60/0x165 Modules linked in: CPU: 0 UID: 0 PID: 495 Comm: kworker/u4:2 Not tainted 6.14.0-rc5-wt-g03960e6f9d47 #33 13c287eeabfe1efea01c0bcc863723ab082e17cf Workqueue: cfg80211 cfg80211_propagate_cac_done_wk Stack: 00000000 00000001 ffffff00 6093267c 00000000 6002ec30 6d577c50 60037608 00000000 67e8d108 6063717b 00000000 Call Trace: [<6002ec30>] ? _printk+0x0/0x98 [<6003c2b3>] show_stack+0x10e/0x11a [<6002ec30>] ? _printk+0x0/0x98 [<60037608>] dump_stack_lvl+0x71/0xb8 [<6063717b>] ? wdev_chandef+0x60/0x165 [<6003766d>] dump_stack+0x1e/0x20 [<6005d1b7>] __warn+0x101/0x20f [<6005d3a8>] warn_slowpath_fmt+0xe3/0x15d [<600b0c5c>] ? mark_lock.part.0+0x0/0x4ec [<60751191>] ? __this_cpu_preempt_check+0x0/0x16 [<600b11a2>] ? mark_held_locks+0x5a/0x6e [<6005d2c5>] ? warn_slowpath_fmt+0x0/0x15d [<60052e53>] ? unblock_signals+0x3a/0xe7 [<60052f2d>] ? um_set_signals+0x2d/0x43 [<60751191>] ? __this_cpu_preempt_check+0x0/0x16 [<607508b2>] ? lock_is_held_type+0x207/0x21f [<6063717b>] wdev_chandef+0x60/0x165 [<605f89b4>] regulatory_propagate_dfs_state+0x247/0x43f [<60052f00>] ? um_set_signals+0x0/0x43 [<605e6bfd>] cfg80211_propagate_cac_done_wk+0x3a/0x4a [<6007e460>] process_scheduled_works+0x3bc/0x60e [<6007d0ec>] ? move_linked_works+0x4d/0x81 [<6007d120>] ? assign_work+0x0/0xaa [<6007f81f>] worker_thread+0x220/0x2dc [<600786ef>] ? set_pf_worker+0x0/0x57 [<60087c96>] ? to_kthread+0x0/0x43 [<6008ab3c>] kthread+0x2d3/0x2e2 [<6007f5ff>] ? worker_thread+0x0/0x2dc [<6006c05b>] ? calculate_sigpending+0x0/0x56 [<6003b37d>] new_thread_handler+0x4a/0x64 irq event stamp: 614611 hardirqs last enabled at (614621): [<00000000600bc96b>] __up_console_sem+0x82/0xaf hardirqs last disabled at (614630): [<00000000600bc92c>] __up_console_sem+0x43/0xaf softirqs last enabled at (614268): [<00000000606c55c6>] __ieee80211_wake_queue+0x933/0x985 softirqs last disabled at (614266): [<00000000606c52d6>] __ieee80211_wake_queue+0x643/0x985 Fixes: 26ec17a1dc5e ("cfg80211: Fix radar event during another phy CAC") Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de> Link: https://patch.msgid.link/20250717162547.94582-1-Alexander@wetzel-home.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-18wifi: cfg80211: support configuring an S1G short beaconing BSSLachlan Hodges
S1G short beacons are an optional frame type used in an S1G BSS that contain a limited set of elements. While they are optional, they are a fundamental part of S1G that enables significant power saving. Expose 2 additional netlink attributes, NL80211_ATTR_S1G_LONG_BEACON_PERIOD which denotes the number of beacon intervals between each long beacon and NL80211_ATTR_S1G_SHORT_BEACON which is a nested attribute containing the short beacon tail and head. We split them as the long beacon period cannot be updated, and is only used when initialisng the interface, whereas the short beacon data can be used to both initialise and update the templates. This follows how things such as the beacon interval and DTIM period currently operate. During the initialisation path, we ensure we have the long beacon period if the short beacon data is being passed down, whereas the update path will simply update the template if its sent down. The short beacon data is validated using the same routines for regular beacons as they support correctly parsing the short beacon format while ensuring the frame is well-formed. Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com> Link: https://patch.msgid.link/20250717074205.312577-2-lachlan.hodges@morsemicro.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-18wifi: cfg80211/mac80211: remove wrong scan request n_channelsJohannes Berg
This (partially) reverts commits - 838c7b8f1f27 ("wifi: nl80211: Avoid address calculations via out of bounds array indexing") - f1d3334d604c ("wifi: cfg80211: sme: init n_channels before channels[] access") - 82bbe02b2500 ("wifi: mac80211: Set n_channels after allocating struct cfg80211_scan_request") These commits all set the structure to be in an inconsistent state, setting n_channels to some value before them actually being filled in. That's fine for what the code does now, but with the removal of __counted_by() in 444020f4bf06 ("wifi: cfg80211: remove scan request n_channels counted_by") it's no longer needed and it does leave a bit of a landmine there since breaking out of some code to send the scan or something would leave it wrong. Remove the now superfluous n_channels settings. Link: https://patch.msgid.link/20250718103237.59510b2384c5.Ied5ba9c5c49efc008f4491c8ca7a45858a83f064@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-15wifi: cfg80211: fix double free for link_sinfo in nl80211_station_dump()Sarika Sharma
Currently, the link_sinfo structure is being freed twice in nl80211_dump_station(), once after the send_station() call and again in the error handling path. This results in a double free of both link_sinfo and link_sinfo->pertid, which might lead to undefined behavior or kernel crashes. Hence, fix by ensuring cfg80211_sinfo_release_content() is only invoked once during execution of nl80211_station_dump(). Fixes: 49e47223ecc4 ("wifi: cfg80211: allocate memory for link_station info structure") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/81f30515-a83d-4b05-a9d1-e349969df9e9@sabinyo.mountain/ Reported-by: syzbot+4ba6272678aa468132c8@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/68655325.a70a0220.5d25f.0316.GAE@google.com Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com> Link: https://patch.msgid.link/20250714084405.178066-1-quic_sarishar@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-15wifi: cfg80211: fix off channel operation allowed check for MLOAditya Kumar Singh
In cfg80211_off_channel_oper_allowed(), the current logic disallows off-channel operations if any link operates on a radar channel, assuming such channels cannot be vacated. This assumption holds for non-MLO interfaces but not for MLO. With MLO and multi-radio devices, different links may operate on separate radios. This allows one link to scan off-channel while another remains on a radar channel. For example, in a 5 GHz split-phy setup, the lower band can scan while the upper band stays on a radar channel. Off-channel operations can be allowed if the radio/link onto which the input channel falls is different from the radio/link which has an active radar channel. Therefore, fix cfg80211_off_channel_oper_allowed() by returning false only if the requested channel maps to the same radio as an active radar channel. Allow off-channel operations when the requested channel is on a different radio, as in MLO with multi-radio setups. Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Signed-off-by: Amith A <quic_amitajit@quicinc.com> Link: https://patch.msgid.link/20250714040742.538550-1-quic_amitajit@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-15wifi: cfg80211: parse attribute to update unsolicited probe response templateYuvarani V
At present, the updated unsolicited broadcast probe response template is not processed during userspace commands such as channel switch or color change. This leads to an issue where older incorrect unsolicited probe response is still used during these events. Add support to parse the netlink attribute and store it so that mac80211/drivers can use it to set the BSS_CHANGED_UNSOL_BCAST_PROBE_RESP flag in order to send the updated unsolicited broadcast probe response templates during these events. Signed-off-by: Yuvarani V <quic_yuvarani@quicinc.com> Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250710-update_unsol_bcast_probe_resp-v2-1-31aca39d3b30@oss.qualcomm.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.16-rc6-2). No conflicts. Adjacent changes: drivers/net/wireless/mediatek/mt76/mt7925/mcu.c c701574c5412 ("wifi: mt76: mt7925: fix invalid array index in ssid assignment during hw scan") b3a431fe2e39 ("wifi: mt76: mt7925: fix off by one in mt7925_mcu_hw_scan()") drivers/net/wireless/mediatek/mt76/mt7996/mac.c 62da647a2b20 ("wifi: mt76: mt7996: Add MLO support to mt7996_tx_check_aggr()") dc66a129adf1 ("wifi: mt76: add a wrapper for wcid access with validation") drivers/net/wireless/mediatek/mt76/mt7996/main.c 3dd6f67c669c ("wifi: mt76: Move RCU section in mt7996_mcu_add_rate_ctrl()") 8989d8e90f5f ("wifi: mt76: mt7996: Do not set wcid.sta to 1 in mt7996_mac_sta_event()") net/mac80211/cfg.c 58fcb1b4287c ("wifi: mac80211: reject VHT opmode for unsupported channel widths") 037dc18ac3fb ("wifi: mac80211: add support for storing station S1G capabilities") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-09wifi: cfg80211/mac80211: implement dot11ExtendedRegInfoSupportSomashekhar Puttagangaiah
Implement dot11ExtendedRegInfoSupport to advertise non-AP station regulatory power capability as part of regulatory connectivity element in (Re)Association request frames so that AP can achieve maximum client connectivity. Control field which was interpreted using value of 3-bits B5 to B3, now uses value of 4-bits B6 to B3 to interpret the type of AP. Hence update IEEE80211_HE_6GHZ_OPER_CTRL_REG_INFO to parse 4-bits control field. If older AP still updates only 3-bits value of control field, station can still interpret the value as per section E.2.7 of IEEE 802.11 REVme D7.0 and support the appropriate AP type. Also update IEEE80211_6GHZ_CTRL_REG_INDOOR_SP_AP as the value of standard power AP is changed to 8 instead of 4 so that AP can support both LPI AP and SP AP to maximize the connectivity with stations. For backward compatibility, keeping value 4 as old AP by limiting it to SP AP only. Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250609213232.90cdef116aad.I85da390fbee59355e3855691933e6a5e55c47ac4@changeid [fix kernel-doc] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-09wifi: cfg80211: add a flag for the first part of a scanBenjamin Berg
When there are no non-6 GHz channels, then the 6 GHz scan is the first part of a split scan. Add a boolean denoting whether the scan is the first part of a scan as it might be useful to drivers for internal bookkeeping. This flag is also set if the scan is not split. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250609213231.07e5a8a452ec.Ibf18f513e507422078fb31b28947e582a20df87a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-09wifi: cfg80211: only verify part of Extended MLD CapabilitiesBenjamin Berg
We verify that the Extended MLD Capabilities are matching between links. However, some bits are reserved and in particular the Recommended Max Links subfield may not necessarily match. So only verify the known subfields that can reliably be expected to be the same. More information can be found in Table 9-417o, in IEEE P802.11be/D7.0. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250609213231.a2fad48dd3e6.Iae1740cd2ac833bc4a64fd2af718e1485158fd42@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-09wifi: nl80211: make nl80211_check_scan_flags() type safeJohannes Berg
The cast from void * here coupled with the boolean argument on what to cast to is confusing and really not needed, just split the code and make a type-safe interface. It seems to even reduce the code size slightly, at least on x86-64. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250609213231.bdb3c96570b0.Ia153e6ce06dc9a636ff5bcc1d52468a1afd06e13@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-09wifi: cfg80211: hide scan internalsJohannes Berg
Hide the internal scan fields from mac80211 and drivers, the 'notified' variable is for internal tracking, and the 'info' is output that's passed to cfg80211_scan_done() and stored only for delayed userspace notification. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250609213231.6a62e41858e2.I004f66e9c087cc6e6ae4a24951cf470961ee9466@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-08wifi: cfg80211: move away from using a fake platform deviceGreg Kroah-Hartman
Downloading regulatory "firmware" needs a device to hang off of, and so a platform device seemed like the simplest way to do this. Now that we have a faux device interface, use that instead as this "regulatory device" is not anything resembling a platform device at all. Cc: Johannes Berg <johannes@sipsolutions.net> Cc: <linux-wireless@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patch.msgid.link/2025070116-growing-skeptic-494c@gregkh Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-07wifi: prevent A-MSDU attacks in mesh networksMathy Vanhoef
This patch is a mitigation to prevent the A-MSDU spoofing vulnerability for mesh networks. The initial update to the IEEE 802.11 standard, in response to the FragAttacks, missed this case (CVE-2025-27558). It can be considered a variant of CVE-2020-24588 but for mesh networks. This patch tries to detect if a standard MSDU was turned into an A-MSDU by an adversary. This is done by parsing a received A-MSDU as a standard MSDU, calculating the length of the Mesh Control header, and seeing if the 6 bytes after this header equal the start of an rfc1042 header. If equal, this is a strong indication of an ongoing attack attempt. This defense was tested with mac80211_hwsim against a mesh network that uses an empty Mesh Address Extension field, i.e., when four addresses are used, and when using a 12-byte Mesh Address Extension field, i.e., when six addresses are used. Functionality of normal MSDUs and A-MSDUs was also tested, and confirmed working, when using both an empty and 12-byte Mesh Address Extension field. It was also tested with mac80211_hwsim that A-MSDU attacks in non-mesh networks keep being detected and prevented. Note that the vulnerability being patched, and the defense being implemented, was also discussed in the following paper and in the following IEEE 802.11 presentation: https://papers.mathyvanhoef.com/wisec2025.pdf https://mentor.ieee.org/802.11/dcn/25/11-25-0949-00-000m-a-msdu-mesh-spoof-protection.docx Cc: stable@vger.kernel.org Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be> Link: https://patch.msgid.link/20250616004635.224344-1-Mathy.Vanhoef@kuleuven.be Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-30wifi: cfg80211: fix S1G beacon head validation in nl80211Lachlan Hodges
S1G beacons contain fixed length optional fields that precede the variable length elements, ensure we take this into account when validating the beacon. This particular case was missed in 1e1f706fc2ce ("wifi: cfg80211/mac80211: correctly parse S1G beacon optional elements"). Fixes: 1d47f1198d58 ("nl80211: correctly validate S1G beacon head") Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com> Link: https://patch.msgid.link/20250626115118.68660-1-lachlan.hodges@morsemicro.com [shorten/reword subject] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-24wifi: cfg80211: support configuration of S1G station capabilitiesLachlan Hodges
Currently there is no support for initialising a peers S1G capabilities, this patch adds support for configuring an S1G station. Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com> Link: https://patch.msgid.link/20250617080610.756048-2-lachlan.hodges@morsemicro.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-24wifi: cfg80211: Report per-radio RTS threshold to userspaceRoopni Devanathan
In case of multi-radio wiphys, with per-radio RTS threshold brought into use, RTS threshold for each radio in a wiphy can be recorded in wiphy parameter - wiphy_radio_cfg, as an array. Add a new attribute - NL80211_WIPHY_RADIO_ATTR_RTS_THRESHOLD in nested parameter - NL80211_ATTR_WIPHY_RADIOS. When a request for getting RTS threshold for a particular radio is received, parse the radio id and get the required data. Add this data to the newly added nested attribute NL80211_WIPHY_RADIO_ATTR_RTS_THRESHOLD. Add support to report this data to userspace. Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250615082312.619639-4-quic_rdevanat@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-24wifi: cfg80211: Add Support to Set RTS Threshold for each RadioRoopni Devanathan
Currently, setting RTS threshold is based on per-phy basis, i.e., all the radios present in a wiphy will take RTS threshold value to be the one sent from userspace. But each radio in a multi-radio wiphy can have different RTS threshold requirements. To extend support to set RTS threshold for each radio, get the radio for which RTS threshold needs to be changed from the user. Use the attribute in NL - NL80211_ATTR_WIPHY_RADIO_INDEX, to identify the radio of interest. Create a new structure - wiphy_radio_cfg and add rts_threshold in it as a u32 value to store RTS threshold of each radio in a wiphy and allocate memory for it during wiphy register based on the wiphy.n_radio updated by drivers. Pass radio id received from the user to mac80211 drivers along with its corresponding RTS threshold. Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250615082312.619639-3-quic_rdevanat@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-24wifi: cfg80211/mac80211: Add support to get radio indexRoopni Devanathan
Currently, per-radio attributes are set on per-phy basis, i.e., all the radios present in a wiphy will take attributes values sent from user. But each radio in a wiphy can get different values from userspace based on its requirement. To extend support to set per-radio attributes, add support to get radio index from userspace. Add an NL attribute - NL80211_ATTR_WIPHY_RADIO_INDEX, to get user specified radio index for which attributes should be changed. Pass this to individual drivers, so that the drivers can use this radio index to change per-radio attributes when necessary. Currently, per-radio attributes identified are: NL80211_ATTR_WIPHY_TX_POWER_LEVEL NL80211_ATTR_WIPHY_ANTENNA_TX NL80211_ATTR_WIPHY_ANTENNA_RX NL80211_ATTR_WIPHY_RETRY_SHORT NL80211_ATTR_WIPHY_RETRY_LONG NL80211_ATTR_WIPHY_FRAG_THRESHOLD NL80211_ATTR_WIPHY_RTS_THRESHOLD NL80211_ATTR_WIPHY_COVERAGE_CLASS NL80211_ATTR_TXQ_LIMIT NL80211_ATTR_TXQ_MEMORY_LIMIT NL80211_ATTR_TXQ_QUANTUM By default, the radio index is set to -1. This means the attribute should be treated as a global configuration. If the user has not specified any index, then the radio index passed to individual drivers would be -1. This would indicate that the attribute applies to all radios in that wiphy. Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250615082312.619639-2-quic_rdevanat@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-24wifi: mac80211: extend support to fill link level sinfo structureSarika Sharma
Currently, sinfo structure is supported to fill information at deflink( or one of the links) level for station. This has problems when applied to fetch multi-link(ML) station information. Hence, if valid_links are present, support filling link_station structure for each link. This will be helpful to check the link related statistics during MLO. Additionally, TXQ stats for pertid are applicable at station level not at link level. Therefore check link_id is less then 0, before filling TXQ stats in pertid stats. Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com> Link: https://patch.msgid.link/20250528054420.3050133-9-quic_sarishar@quicinc.com [fix some indentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-24wifi: cfg80211: clear sinfo->filled for MLO station statisticsSarika Sharma
Currently, sinfo->filled is for set in sta_set_sinfo() after filling the corresponding fields in station_info structure for station statistics. For non-ML stations, the fields are correctly filled from sta->deflink and corresponding sinfo->filled bit are set, but for MLO any one of link's data is filled and corresponding sinfo->filled bit is set. For MLO before embed NL message, fields of sinfo structure like bytes, packets, signal are updated with accumulated, best, least of all links data. But some of fields like rssi, pertid don't make much sense at MLO level. Hence, to prevent misinterpretation, clear sinfo->filled for fields which don't make much sense at MLO level. This will prevent filling misleading values in NL message. Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com> Link: https://patch.msgid.link/20250528054420.3050133-8-quic_sarishar@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-24wifi: cfg80211: allocate memory for link_station info structureSarika Sharma
Currently, station_info structure is passed to fill station statistics from mac80211/drivers. After NL message send to user space for requested station statistics, memory for station statistics is freed in cfg80211. Therefore, memory allocation/free for link station statistics should also happen in cfg80211 only. Hence, allocate the memory for link_station structure for all possible links and free in cfg80211_sinfo_release_content(). Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com> Link: https://patch.msgid.link/20250528054420.3050133-6-quic_sarishar@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-24wifi: cfg80211: add statistics for providing overview for MLO stationSarika Sharma
Currently statistics are handled at link level for multi-link operation(MLO). There is no provision to check accumulated statistics for a multi-link(ML) station. Other statistics, such as signal, rates, are also managed at the link level only. Statistics such as packets, bytes, signal, rates, etc are useful to provide overall overview for the ML stations. Statistics such as packets, bytes are accumulated statistics at MLO level. However, MLO statistics for rates and signal can not be accumulated since it won't make much sense. Hence, handle other statistics such as signal, rates, etc bit differently at MLO level. The signal could be the best of all links- e.g. if Link 1 has a signal strength of -70 dBm and Link 2 has -65 dBm, the signal for MLO will be -65 dBm. The rate could be determined based on the most recently updated link- e.g. if link 1 has a rate of 300 Mbps and link 2 has a rate of 450 Mbps, the MLO rate can be calculated based on the inactivity of each link. If the inactive time for link 1 is 20 seconds and for link 2 is 10 seconds, the MLO rate will be the most recently updated rate, which is link 2's rate of 450 Mbps. The inactive time, dtim_period and beacon_interval can be taken as the least value of field from link level. Similarly, other MLO level applicable fields are handled and the fields which don't make much sense at MLO level, a subsequent change will handle to embed NL message. Hence, add accumulated and other statistics for MLO station if valid links are present to represent comprehensive overview for the ML stations. Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com> Link: https://patch.msgid.link/20250528054420.3050133-5-quic_sarishar@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-24wifi: cfg80211: extend to embed link level statistics in NL messageSarika Sharma
Currently, statistics is supported at deflink( or one of the links) level for station. This has problems when applied to multi-link(ML) connections. Hence, add changes to support link level statistics to embed NL message with link related information if valid links are present. This will be helpful to check the link related statistics during MLO. The statistics will be embedded into NL message as below: For non-ML: cmd-> NL80211_ATTR_IFINDEX NL80211_ATTR_MAC NL80211_ATTR_GENERATION ....etc NL80211_ATTR_STA_INFO | nested NL80211_STA_INFO_CONNECTED_TIME, NL80211_STA_INFO_STA_FLAGS, NL80211_STA_INFO_RX_BYTES, NL80211_STA_INFO_TX_BYTES, .........etc For MLO: cmd -> NL80211_ATTR_IFINDEX NL80211_ATTR_MAC NL80211_ATTR_GENERATION .......etc NL80211_ATTR_STA_INFO | nested NL80211_STA_INFO_CONNECTED_TIME, NL80211_STA_INFO_STA_FLAGS, ........etc NL80211_ATTR_MLO_LINK_ID, NL80211_ATTR_MLD_ADDR, NL80211_ATTR_MLO_LINKS | nested link_id-1 | nested NL80211_ATTR_MLO_LINK_ID, NL80211_ATTR_MAC, NL80211_ATTR_STA_INFO | nested NL80211_STA_INFO_RX_BYTES, NL80211_STA_INFO_TX_BYTES, NL80211_STA_INFO_CONNECTED_TIME, ..........etc. link_id-2 | nested NL80211_ATTR_MLO_LINK_ID, NL80211_ATTR_MAC, NL80211_ATTR_STA_INFO | nested NL80211_STA_INFO_RX_BYTES, NL80211_STA_INFO_TX_BYTES, NL80211_STA_INFO_CONNECTED_TIME, .........etc Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com> Link: https://patch.msgid.link/20250528054420.3050133-4-quic_sarishar@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-20wifi: cfg80211: Add support for link reconfiguration negotiation offload to ↵Kavita Kavita
driver In the case of SME-in-driver, the driver can internally choose to update the links based on the AP MLD recommendation and do link reconfiguration negotiation with AP MLD. (e.g., After the driver processing the BSS Transition Management request frame received from the AP MLD with Neighbor Report containing Multi-Link element with recommended links information chooses to do link reconfiguration negotiation with AP MLD). To support this, extend cfg80211_mlo_reconf_add_done() and NL80211_CMD_ASSOC_MLO_RECONF to indicate added links information for driver-initiated link reconfiguration requests. For removed links, the driver indicates links information using the NL80211_CMD_LINKS_REMOVED event for driver-initiated cases, the same as supplicant initiated cases. For the driver-initiated case, cfg80211 will receive link reconfiguration result asynchronously from driver so holding BSSes of the accepted add links is needed in the event path. Also, no need of unhold call for the rejected add link BSSes since there was no hold call happened previously. Once the supplicant receives the NL80211_CMD_ASSOC_MLO_RECONF event, it needs to process the information about newly added links and install per-link group keys (e.g., GTK/IGTK/BIGTK etc.). In case of the SME-in-driver, using a vendor interface etc. to notify the supplicant to initiate a link reconfiguration request and then supplicant sending command to the cfg80211 can lead to race conditions. The correct design to avoid this is that the driver indicates the cfg80211 directly with the results of the link reconfiguration negotiation. Signed-off-by: Kavita Kavita <quic_kkavita@quicinc.com> Link: https://patch.msgid.link/20250604105757.2542-3-quic_kkavita@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-20wifi: cfg80211: Add utility API to get radio index from channelVasanthakumar Thiagarajan
Add utility API cfg80211_get_radio_idx_by_chan() to retrieve the radio index corresponding to a given channel in a multi-radio wiphy. This utility function can be used when we want to check the radio-specific data for a channel in a multi-radio wiphy. For example, it can help determine the radio index required to handle a scan request. This index can then be used to decide whether the scan can proceed without interfering with ongoing DFS operations on another radio. Signed-off-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Link: https://patch.msgid.link/20250527-mlo-dfs-acs-v2-1-92c2f37c81d9@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-12Merge tag 'net-6.16-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth and wireless. Current release - regressions: - af_unix: allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD Current release - new code bugs: - eth: airoha: correct enable mask for RX queues 16-31 - veth: prevent NULL pointer dereference in veth_xdp_rcv when peer disappears under traffic - ipv6: move fib6_config_validate() to ip6_route_add(), prevent invalid routes Previous releases - regressions: - phy: phy_caps: don't skip better duplex match on non-exact match - dsa: b53: fix untagged traffic sent via cpu tagged with VID 0 - Revert "wifi: mwifiex: Fix HT40 bandwidth issue.", it caused transient packet loss, exact reason not fully understood, yet Previous releases - always broken: - net: clear the dst when BPF is changing skb protocol (IPv4 <> IPv6) - sched: sfq: fix a potential crash on gso_skb handling - Bluetooth: intel: improve rx buffer posting to avoid causing issues in the firmware - eth: intel: i40e: make reset handling robust against multiple requests - eth: mlx5: ensure FW pages are always allocated on the local NUMA node, even when device is configure to 'serve' another node - wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850, prevent kernel crashes - wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request() for 3 sec if fw_stats_done is not set" * tag 'net-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits) selftests: drv-net: rss_ctx: Add test for ntuple rules targeting default RSS context net: ethtool: Don't check if RSS context exists in case of context 0 af_unix: Allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD. ipv6: Move fib6_config_validate() to ip6_route_add(). net: drv: netdevsim: don't napi_complete() from netpoll net/mlx5: HWS, Add error checking to hws_bwc_rule_complex_hash_node_get() veth: prevent NULL pointer dereference in veth_xdp_rcv net_sched: remove qdisc_tree_flush_backlog() net_sched: ets: fix a race in ets_qdisc_change() net_sched: tbf: fix a race in tbf_change() net_sched: red: fix a race in __red_change() net_sched: prio: fix a race in prio_tune() net_sched: sch_sfq: reject invalid perturb period net: phy: phy_caps: Don't skip better duplex macth on non-exact match MAINTAINERS: Update Kuniyuki Iwashima's email address. selftests: net: add test case for NAT46 looping back dst net: clear the dst when changing skb protocol net/mlx5e: Fix number of lanes to UNKNOWN when using data_rate_oper net/mlx5e: Fix leak of Geneve TLV option object net/mlx5: HWS, make sure the uplink is the last destination ...
2025-06-11wifi: cfg80211: use kfree_sensitive() for connkeys cleanupZilin Guan
The nl80211_parse_connkeys() function currently uses kfree() to release the 'result' structure in error handling paths. However, if an error occurs due to result->def being less than 0, the 'result' structure may contain sensitive information. To prevent potential leakage of sensitive data, replace kfree() with kfree_sensitive() when freeing 'result'. This change aligns with the approach used in its caller, nl80211_join_ibss(), enhancing the overall security of the wireless subsystem. Signed-off-by: Zilin Guan <zilin@seu.edu.cn> Link: https://patch.msgid.link/20250523110156.4017111-1-zilin@seu.edu.cn Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-08treewide, timers: Rename from_timer() to timer_container_of()Ingo Molnar
Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
2025-06-05wifi: cfg80211/mac80211: correctly parse S1G beacon optional elementsLachlan Hodges
S1G beacons are not traditional beacons but a type of extension frame. Extension frames contain the frame control and duration fields, followed by zero or more optional fields before the frame body. These optional fields are distinct from the variable length elements. The presence of optional fields is indicated in the frame control field. To correctly locate the elements offset, the frame control must be parsed to identify which optional fields are present. Currently, mac80211 parses S1G beacons based on fixed assumptions about the frame layout, without inspecting the frame control field. This can result in incorrect offsets to the "variable" portion of the frame. Properly parse S1G beacon frames by using the field lengths defined in IEEE 802.11-2024, section 9.3.4.3, ensuring that the elements offset is calculated accurately. Fixes: 9eaffe5078ca ("cfg80211: convert S1G beacon to scan results") Fixes: cd418ba63f0c ("mac80211: convert S1G beacon to scan results") Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com> Link: https://patch.msgid.link/20250603053538.468562-1-lachlan.hodges@morsemicro.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-05-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.15-rc6). No conflicts. Adjacent changes: net/core/dev.c: 08e9f2d584c4 ("net: Lock netdevices during dev_shutdown") a82dc19db136 ("net: avoid potential race between netdev_get_by_index_lock() and netns switch") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-06wifi: cfg80211: fix out-of-bounds access during multi-link element ↵Veerendranath Jakkam
defragmentation Currently during the multi-link element defragmentation process, the multi-link element length added to the total IEs length when calculating the length of remaining IEs after the multi-link element in cfg80211_defrag_mle(). This could lead to out-of-bounds access if the multi-link element or its corresponding fragment elements are the last elements in the IEs buffer. To address this issue, correctly calculate the remaining IEs length by deducting the multi-link element end offset from total IEs end offset. Cc: stable@vger.kernel.org Fixes: 2481b5da9c6b ("wifi: cfg80211: handle BSS data contained in ML probe responses") Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://patch.msgid.link/20250424-fix_mle_defragmentation_oob_access-v1-1-84412a1743fa@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-23wifi: nl80211: add link id of transmitted profile for MLO MBSSIDRameshkumar Sundaram
During non-transmitted (nontx) profile configuration, interface index of the transmitted (tx) profile is used to retrieve the wireless device (wdev) associated with it. With MLO, this 'wdev' may be part of an MLD with more than one link, hence only interface index is not sufficient anymore to retrieve the correct tx profile. Add a new attribute to configure link id of tx profile. Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com> Co-developed-by: Muna Sinada <muna.sinada@oss.qualcomm.com> Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com> Co-developed-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com> Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com> Link: https://patch.msgid.link/20250408184501.3715887-2-aloka.dixit@oss.qualcomm.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-23wifi: cfg80211: Add support to get EMLSR capabilities of non-AP MLDRamasamy Kaliappan
The Enhanced multi-link single-radio (EMLSR) operation allows a non-AP MLD with multiple receive chains to listen on one or more EMLSR links when the corresponding non-AP STA(s) affiliated with the non-AP MLD is (are) in the awake state. [IEEE 802.11be-2024, (35.3.17 Enhanced multi-link single-radio (EMLSR) operation)] An MLD which intends to enable EMLSR operations will set the EML Capabilities Present subfield to 1 and shall set the EMLSR Support subfield in the Common Info field of the Basic Multi-Link element to 1 in all Management frames that include the Basic Multi-Link element except Authentication frames. EML capabilities contains information such as EML Transition timeout, Padding delay and Transition delay. These fields needs to updated to drivers to trigger EMLSR operation and to transmit and receive initial control frame and data frames. Add support to receive EML Capabilities subfield that non-AP MLD advertises during (re)association request and send it to underlying drivers during ADD/SET station. Signed-off-by: Ramasamy Kaliappan <quic_rkaliapp@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Link: https://patch.msgid.link/20250327051320.3253783-2-quic_ramess@quicinc.com [accept EMLSR capabilities only for unassoc AP STA] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-05treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-03-18wifi: nl80211: re-enable multi-link reconfigurationJohannes Berg
With the recent fixes, we can re-enable multi-link reconfiguration. Also add a CMD() entry to allow userspace discovery for it. Link: https://patch.msgid.link/20250318135009.a95c43837a0f.Ic6ed3d184e5be8ba47c6affa7271daaf824fd823@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-18wifi: cfg80211: init wiphy_work before allocating rfkill failsEdward Adam Davis
syzbort reported a uninitialize wiphy_work_lock in cfg80211_dev_free. [1] After rfkill allocation fails, the wiphy release process will be performed, which will cause cfg80211_dev_free to access the uninitialized wiphy_work related data. Move the initialization of wiphy_work to before rfkill initialization to avoid this issue. [1] INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. CPU: 0 UID: 0 PID: 5935 Comm: syz-executor550 Not tainted 6.14.0-rc6-syzkaller-00103-g4003c9e78778 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 assign_lock_key kernel/locking/lockdep.c:983 [inline] register_lock_class+0xc39/0x1240 kernel/locking/lockdep.c:1297 __lock_acquire+0x135/0x3c40 kernel/locking/lockdep.c:5103 lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5851 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x3a/0x60 kernel/locking/spinlock.c:162 cfg80211_dev_free+0x30/0x3d0 net/wireless/core.c:1196 device_release+0xa1/0x240 drivers/base/core.c:2568 kobject_cleanup lib/kobject.c:689 [inline] kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x1e4/0x5a0 lib/kobject.c:737 put_device+0x1f/0x30 drivers/base/core.c:3774 wiphy_free net/wireless/core.c:1224 [inline] wiphy_new_nm+0x1c1f/0x2160 net/wireless/core.c:562 ieee80211_alloc_hw_nm+0x1b7a/0x2260 net/mac80211/main.c:835 mac80211_hwsim_new_radio+0x1d6/0x54e0 drivers/net/wireless/virtual/mac80211_hwsim.c:5185 hwsim_new_radio_nl+0xb42/0x12b0 drivers/net/wireless/virtual/mac80211_hwsim.c:6242 genl_family_rcv_msg_doit+0x202/0x2f0 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x565/0x800 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2533 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x53c/0x7f0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0x8b8/0xd70 net/netlink/af_netlink.c:1882 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg net/socket.c:733 [inline] ____sys_sendmsg+0xaaf/0xc90 net/socket.c:2573 ___sys_sendmsg+0x135/0x1e0 net/socket.c:2627 __sys_sendmsg+0x16e/0x220 net/socket.c:2659 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 Fixes: 72d520476a2f ("wifi: cfg80211: cancel wiphy_work before freeing wiphy") Reported-by: syzbot+aaf0488c83d1d5f4f029@syzkaller.appspotmail.com Close: https://syzkaller.appspot.com/bug?extid=aaf0488c83d1d5f4f029 Tested-by: syzbot+aaf0488c83d1d5f4f029@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis <eadavis@qq.com> Link: https://patch.msgid.link/tencent_258DD9121DDDB9DD9A1939CFAA0D8625B107@qq.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-18wifi: nl80211: store chandef on the correct link when starting CACAditya Kumar Singh
Link ID to store chandef is still being used as 0 even in case of MLO which is incorrect. This leads to issue during CAC completion where link 0 as well gets stopped. Fixes: 0b7798232eee ("wifi: cfg80211/mac80211: use proper link ID for DFS") Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250314-fix_starting_cac_during_mlo-v1-1-3b51617d7ea5@oss.qualcomm.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-18Merge net-next/main to resolve conflictsJohannes Berg
There are a few conflicts between the work that went into wireless and that's here now, resolve them. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Cross-merge networking fixes after downstream PR (net-6.14-rc6). Conflicts: tools/testing/selftests/drivers/net/ping.py 75cc19c8ff89 ("selftests: drv-net: add xdp cases for ping.py") de94e8697405 ("selftests: drv-net: store addresses in dict indexed by ipver") https://lore.kernel.org/netdev/20250311115758.17a1d414@canb.auug.org.au/ net/core/devmem.c a70f891e0fa0 ("net: devmem: do not WARN conditionally after netdev_rx_queue_restart()") 1d22d3060b9b ("net: drop rtnl_lock for queue_mgmt operations") https://lore.kernel.org/netdev/20250313114929.43744df1@canb.auug.org.au/ Adjacent changes: tools/testing/selftests/net/Makefile 6f50175ccad4 ("selftests: Add IPv6 link-local address generation tests for GRE devices.") 2e5584e0f913 ("selftests/net: expand cmsg_ipv6.sh with ipv4") drivers/net/ethernet/broadcom/bnxt/bnxt.c 661958552eda ("eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logic") fe96d717d38e ("bnxt_en: Extend queue stop/start for TX rings") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-12wifi: cfg80211: expose cfg80211_chandef_get_width()Johannes Berg
This can be just a trivial inline, to simplify some code. Expose it, and also use it in util.c where it wasn't previously available. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250311122534.c5c3b4af9a74.Ib25cf60f634dc359961182113214e5cdc3504e9c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: cfg80211: Update the link address when a link is addedIlan Peer
When links are added, update the wireless device link addresses based on the information provided by the driver. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308225541.d694a9125aba.I79b010ea9aab47893e4f22c266362fde30b7f9ac@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: mac80211: allow 320 MHz FTM measurementsAvraham Stern
Add 320 MHz to the list of allowed bandwidths for FTM measurements. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308225541.91f4cbe66817.I9205c585fca6a54a2c5a9e4db98c7781bd1fc4e1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: cfg80211: allow IR in 20 MHz configurationsAnjaneyulu
Some regulatory bodies doesn't allow IR (initiate radioation) on a specific subband, but allows it for channels with a bandwidth of 20 MHz. Add a channel flag that indicates that, and consider it in cfg80211_reg_check_beaconing. While on it, fix the kernel doc of enum nl80211_reg_rule_flags and change it to use BIT(). Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com> Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308225541.d3ab352a73ff.I8a8f79e1c9eb74936929463960ee2a324712fe51@changeid [fix typo] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: cfg80211: allow setting extended MLD capa/opsJohannes Berg
Some extended MLD capabilities and operations bits (currently the "BTM MLD Recommendataion For Multiple APs Support" bit) may depend on userspace capabilities. Allow userspace to pass the values for this field that it supports to the association and link reconfiguration operations. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Link: https://patch.msgid.link/20250308225541.bd52078b5f65.I4dd8f53b0030db7ea87a2e0920989e7e2c7b5345@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 05:48:47 +0000