| Age | Commit message (Collapse) | Author |
|---|
|
As a step towards making NFSD's maximum rsize and wsize variable at
run-time, replace the fixed-size rq_vec[] array in struct svc_rqst
with a chunk of dynamically-allocated memory.
On a system with 8-byte pointers and 4KB pages, pahole reports that
the rq_pages[] array is 2080 bytes. This patch replaces that with
a single 8-byte pointer field.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Performance regression reported with NFS/RDMA using Omnipath,
bisected to commit e084ee673c77 ("svcrdma: Add Write chunk WRs to
the RPC's Send WR chain").
Tracing on the server reports:
nfsd-7771 [060] 1758.891809: svcrdma_sq_post_err:
cq.id=205 cid=226 sc_sq_avail=13643/851 status=-12
sq_post_err reports ENOMEM, and the rdma->sc_sq_avail (13643) is
larger than rdma->sc_sq_depth (851). The number of available Send
Queue entries is always supposed to be smaller than the Send Queue
depth. That seems like a Send Queue accounting bug in svcrdma.
As it's getting to be late in the 6.9-rc cycle, revert this commit.
It can be revisited in a subsequent kernel release.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218743
Fixes: e084ee673c77 ("svcrdma: Add Write chunk WRs to the RPC's Send WR chain")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Chain RDMA Writes that convey Write chunks onto the local Send
chain. This means all WRs for an RPC Reply are now posted with a
single ib_post_send() call, and there is a single Send completion
when all of these are done. That reduces both the per-transport
doorbell rate and completion rate.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Refactor to eventually enable svcrdma to post the Write WRs for each
RPC response using the same ib_post_send() as the Send WR (ie, as a
single WR chain).
svc_rdma_result_payload (originally svc_rdma_read_payload) was added
so that the upper layer XDR encoder could identify a range of bytes
to be possibly conveyed by RDMA (if a Write chunk was provided by
the client).
The purpose of commit f6ad77590a5d ("svcrdma: Post RDMA Writes while
XDR encoding replies") was to post as much of the result payload
outside of svc_rdma_sendto() as possible because svc_rdma_sendto()
used to be called with the xpt_mutex held.
However, since commit ca4faf543a33 ("SUNRPC: Move xpt_mutex into
socket xpo_sendto methods"), the xpt_mutex is no longer held when
calling svc_rdma_sendto(). Thus, that benefit is no longer an issue.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Reduce the doorbell and Send completion rates when sending RPC/RDMA
replies that have Reply chunks. NFS READDIR procedures typically
return their result in a Reply chunk, for example.
Instead of calling ib_post_send() to post the Write WRs for the
Reply chunk, and then calling it again to post the Send WR that
conveys the transport header, chain the Write WRs to the Send WR
and call ib_post_send() only once.
Thanks to the Send Queue completion ordering rules, when the Send
WR completes, that guarantees that Write WRs posted before it have
also completed successfully. Thus all Write WRs for the Reply chunk
can remain unsignaled. Instead of handling a Write completion and
then a Send completion, only the Send completion is seen, and it
handles clean up for both the Writes and the Send.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Since the RPC transaction's svc_rdma_send_ctxt will stay around for
the duration of the RDMA Write operation, the write_info structure
for the Reply chunk can reside in the request's svc_rdma_send_ctxt
instead of being allocated separately.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Having an nfsd thread waiting for an RDMA Read completion is
problematic if the Read responder (ie, the client) stops responding.
We need to go back to handling RDMA Reads by getting the svc scheduler
to call svc_rdma_recvfrom() a second time to finish building an RPC
message after a Read completion.
This is the final patch, and makes several changes that have to
happen concurrently:
1. svc_rdma_process_read_list no longer waits for a completion, but
simply builds and posts the Read WRs.
2. svc_rdma_read_done() now queues a completed Read on
sc_read_complete_q for later processing rather than calling
complete().
3. The completed RPC message is no longer built in the
svc_rdma_process_read_list() path. Finishing the message is now
done in svc_rdma_recvfrom() when it notices work on the
sc_read_complete_q. The "finish building this RPC message" code
is removed from the svc_rdma_process_read_list() path.
This arrangement avoids the need for an nfsd thread to wait for an
RDMA Read non-interruptibly without a timeout. It's basically the
same code structure that Tom Tucker used for Read chunks along with
some clean-up and modernization.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Having an nfsd thread waiting for an RDMA Read completion is
problematic if the Read responder (the client) stops responding. We
need to go back to handling RDMA Reads by allowing the nfsd thread
to return to the svc scheduler, then waking a second thread finish
the RPC message once the Read completion fires.
To start with, restore the rc_pages field so that RDMA Read pages
can be managed across calls to svc_rdma_recvfrom().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The atomic_inc_return() in svc_rdma_send_cid_init() is expensive.
Some svc_rdma_chunk_ctxt's now reside in long-lived container
structures. They don't need a fresh completion ID for every I/O
operation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now that the chunk_ctxt for Reads is no longer dynamically allocated
it can be initialized once for the life of the object that contains
it (struct svc_rdma_recv_ctxt).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The remaining fields of struct svc_rdma_read_info are no longer
referenced.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Since the RDMA Read I/O state is now contained in the recv_ctxt,
svc_rdma_read_special() can use that recv_ctxt to derive the
read_info rather than the other way around. This removes another
usage of the ri_readctxt field, enabling its removal in a
subsequent patch.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Since the RDMA Read I/O state is now contained in the recv_ctxt,
svc_rdma_read_call_chunk() can use that recv_ctxt to derive the
read_info rather than the other way around. This removes another
usage of the ri_readctxt field, enabling its removal in a
subsequent patch.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Since the RDMA Read I/O state is now contained in the recv_ctxt,
svc_rdma_read_multiple_chunks() can use that recv_ctxt to derive the
read_info rather than the other way around. This removes another
usage of the ri_readctxt field, enabling its removal in a
subsequent patch.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Since the RDMA Read I/O state is now contained in the recv_ctxt,
svc_rdma_copy_inline_range() can use that recv_ctxt to derive the
read_info rather than the other way around. This removes another
usage of the ri_readctxt field, enabling its removal in a
subsequent patch.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Since the RDMA Read I/O state is now contained in the recv_ctxt,
svc_rdma_build_read_data_item() can use that recv_ctxt to derive
that information rather than the other way around. This removes
another usage of the ri_readctxt field, enabling its removal in a
subsequent patch.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Since the RDMA Read I/O state is now contained in the recv_ctxt,
svc_rdma_build_read_chunk_range() can use that recv_ctxt to derive
that information rather than the other way around. This removes
another usage of the ri_readctxt field, enabling its removal in a
subsequent patch.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Since the RDMA Read I/O state is now contained in the recv_ctxt,
svc_rdma_build_read_chunk() can use that recv_ctxt to derive that
information rather than the other way around. This removes another
usage of the ri_readctxt field, enabling its removal in a
subsequent patch.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Since the RDMA Read I/O state is now contained in the recv_ctxt,
svc_rdma_build_read_segment() can use the recv_ctxt to derive that
information rather than the other way around. This removes one usage
of the ri_readctxt field, enabling its removal in a subsequent
patch.
At the same time, the use of ri_rqst can similarly be replaced with
a passed-in function parameter.
Start with build_read_segment() because it is a common utility
function at the bottom of the Read chunk path.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Further clean up: move the starting byte offset field into
svc_rdma_recv_ctxt.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Further clean up: move the page index field into svc_rdma_recv_ctxt.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Since the request's svc_rdma_recv_ctxt will stay around for the
duration of the RDMA Read operation, the contents of struct
svc_rdma_read_info can reside in the request's svc_rdma_recv_ctxt
rather than being allocated separately. This will eventually save a
call to kmalloc() in a hot path.
Start this clean-up by moving the Read chunk's svc_rdma_chunk_ctxt.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Prepare for nestling these into the send and recv ctxts so they
no longer have to be allocated dynamically.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
In every instance, the pointer address in that field is now
available by other means.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Enable the eventual removal of the svc_rdma_chunk_ctxt::cc_rdma
field.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Enable the eventual removal of the svc_rdma_chunk_ctxt::cc_rdma
field.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Enable the eventual removal of the svc_rdma_chunk_ctxt::cc_rdma
field.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Enable the eventual removal of the svc_rdma_chunk_ctxt::cc_rdma
field.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Enable the removal of the svc_rdma_chunk_ctxt::cc_rdma field in a
subsequent patch.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
SG_CHUNK_SIZE is 128, making struct svc_rdma_rw_ctxt + the first
SGL array more than 4200 bytes in length, pushing the memory
allocation well into order 1.
Even so, the RDMA rw core doesn't seem to use more than max_send_sge
entries in that array (typically 32 or less), so that is all wasted
space.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Update the DMA error flow tracepoints to report the completion ID of
the failing context. This ties the wait/failure to a particular
operation or request, which is more useful than knowing only the
failing transport.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Update the Send Queue's error flow tracepoints to report the
completion ID of the waiting or failing context. This ties the
wait/failure to a particular operation or request, which is a little
more useful than knowing only the transport that is about to close.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
De-duplicate some code, making it easier to add new tracepoints that
report only a completion ID.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
DMA unmapping can take quite some time, so it should not be handled
in a single-threaded completion handler. Defer releasing write_info
structs to the recently-added workqueue.
With this patch, DMA unmapping can be handled in parallel, and it
does not cause head-of-queue blocking of Write completions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This event brackets the svcrdma_post_* trace points. If this trace
event is enabled but does not appear as expected, that indicates a
chunk_ctxt leak.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Try to catch incorrect calling contexts mechanically rather than by
code review.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The physical device's favored NUMA node ID is available when
allocating a rw_ctxt. Use that value instead of relying on the
assumption that the memory allocation happens to be running on a
node close to the device.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Prevent svc_rdma_build_writes() from walking off the end of a Write
chunk's segment array. Caught with KASAN.
The test that this fix replaces is invalid, and might have been left
over from an earlier prototype of the PCL work.
Fixes: 7a1cbfa18059 ("svcrdma: Use parsed chunk lists to construct RDMA Writes")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
There are currently three separate purposes being served by single
tracepoints. Split them up, as was done with wc_send.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Relieve contention on sc_rw_ctxt_lock by converting rdma->sc_rw_ctxts
to an llist.
The goal is to reduce the average overhead of Send completions,
because a transport's completion handlers are single-threaded on
one CPU core. This change reduces CPU utilization of each Send
completion by 2-3% on my server.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-By: Tom Talpey <tom@talpey.com>
|
|
Because wake_up() takes an IRQ-safe lock, it can be expensive,
especially to call inside of a single-threaded completion handler.
What's more, the Send wait queue almost never has waiters, so
most of the time, this is an expensive no-op.
As always, the goal is to reduce the average overhead of each
completion, because a transport's completion handlers are single-
threaded on one CPU core. This change reduces CPU utilization of
the Send completion thread by 2-3% on my server.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-By: Tom Talpey <tom@talpey.com>
|
|
Fix some spelling mistakes in comments:
succes ==> success
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
These fields are no longer used.
The size of struct svc_rdma_recv_ctxt is now less than 300 bytes on
x86_64, down from 2440 bytes.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently the generic RPC server layer calls svc_rdma_recvfrom()
twice to retrieve an RPC message that uses Read chunks. I'm not
exactly sure why this design was chosen originally.
Instead, let's wait for the Read chunk completion inline in the
first call to svc_rdma_recvfrom().
The goal is to eliminate some page allocator churn.
rdma_read_complete() replaces pages in the second svc_rqst by
calling put_page() repeatedly while the upper layer waits for the
request to be constructed, which adds unnecessary NFS WRITE round-
trip latency.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
|
|
Refactor a bit of commonly used logic so that every site that wants
a close deferred to an nfsd thread does all the right things
(set_bit(XPT_CLOSE) then enqueue).
Also, once XPT_CLOSE is set on a transport, it is never cleared. If
XPT_CLOSE is already set, then the close is already being handled
and the enqueue can be skipped.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now that we have an efficient mechanism to update these two stats,
let's start maintaining them again.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Avoid the overhead of a memory bus lock cycle for counting a value
that is hardly every used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
An efficient way to handle multiple Read chunks is to post them all
together and then take a single completion. This is also how the
code is already structured: when the Read completion fires, all
portions of the incoming RPC message are available to be assembled.
The difficult problem is setting up the Read sink buffers so that
the server pulls the client's data into place, making subsequent
pull-up unnecessary. There are several cases:
* No Read chunks. No-op.
* One data item Read chunk. This is the fast case, where the inline
part of the RPC-over-RDMA message becomes the head and tail, and
the data item chunk is placed in buf->pages.
* A Position-zero Read chunk. Treated like TCP: the Read chunk is
pulled into contiguous pages.
+ A Position-zero Read chunk with data item chunks. Treated like
TCP: all of the Read chunks are pulled into contiguous pages.
+ Multiple data item chunks. Treated like TCP: the inline part is
copied and the data item chunks are pulled into contiguous pages.
The "*" cases are already supported. This patch adds support for the
"+" cases.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
