| Age | Commit message (Collapse) | Author |
|---|
|
Add a per-cpu monitor as part of the sched model:
* opid: operations with preemption and irq disabled
Monitor to ensure wakeup and need_resched occur with irq and
preemption disabled or in irq handlers.
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250728135022.255578-10-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Acked-by: Nam Cao <namcao@linutronix.de>
Tested-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add 2 per-task monitors as part of the sched model:
* nrp: need-resched preempts
Monitor to ensure preemption requires need resched.
* sssw: set state sleep and wakeup
Monitor to ensure sched_set_state to sleepable leads to sleeping and
sleeping tasks require wakeup.
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/20250728135022.255578-9-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Acked-by: Nam Cao <namcao@linutronix.de>
Tested-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The tss monitor currently guarantees task switches can happen only while
scheduling, whereas the sncid monitor enforces scheduling occurs with
interrupt disabled.
Replace the monitors with a more comprehensive specification which
implies both but also ensures that:
* each scheduler call disable interrupts to switch
* each task switch happens with interrupts disabled
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Nam Cao <namcao@linutronix.de>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/20250728135022.255578-8-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add the following tracepoint:
* sched_set_need_resched(tsk, cpu, tif)
Called when a task is set the need resched [lazy] flag
Remove the unused ip parameter from sched_entry and sched_exit and alter
sched_entry to have a value of preempt consistent with the one used in
sched_switch.
Also adapt all monitors using sched_{entry,exit} to avoid breaking build.
These tracepoints are useful to describe the Linux task model and are
adapted from the patches by Daniel Bristot de Oliveira
(https://bristot.me/linux-task-model/).
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Nam Cao <namcao@linutronix.de>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250728135022.255578-7-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
DA monitor can be accessed from multiple cores simultaneously, this is
likely, for instance when dealing with per-task monitors reacting on
events that do not always occur on the CPU where the task is running.
This can cause race conditions where two events change the next state
and we see inconsistent values. E.g.:
[62] event_srs: 27: sleepable x sched_wakeup -> running (final)
[63] event_srs: 27: sleepable x sched_set_state_sleepable -> sleepable
[63] error_srs: 27: event sched_switch_suspend not expected in the state running
In this case the monitor fails because the event on CPU 62 wins against
the one on CPU 63, although the correct state should have been
sleepable, since the task get suspended.
Detect if the current state was modified by using try_cmpxchg while
storing the next value. If it was, try again reading the current state.
After a maximum number of failed retries, react by calling a special
tracepoint, print on the console and reset the monitor.
Remove the functions da_monitor_curr_state() and da_monitor_set_state()
as they only hide the underlying implementation in this case.
Monitors where this type of condition can occur must be able to account
for racing events in any possible order, as we cannot know the winner.
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/20250728135022.255578-6-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
RV monitors relying on the preemptirqs tracepoints are set as dependent
on PREEMPT_TRACER and IRQSOFF_TRACER. In fact, those configurations do
enable the tracepoints but are not the minimal configurations enabling
them, which are TRACE_PREEMPT_TOGGLE and TRACE_IRQFLAGS (not selectable
manually).
Set TRACE_PREEMPT_TOGGLE and TRACE_IRQFLAGS as dependencies for
monitors.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250728135022.255578-5-gmonaco@redhat.com
Fixes: fbe6c09b7eb4 ("rv: Add scpd, snep and sncid per-cpu monitors")
Acked-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Using DA monitors tracepoints with KASAN enabled triggers the following
warning:
BUG: KASAN: global-out-of-bounds in do_trace_event_raw_event_event_da_monitor+0xd6/0x1a0
Read of size 32 at addr ffffffffaada8980 by task ...
Call Trace:
<TASK>
[...]
do_trace_event_raw_event_event_da_monitor+0xd6/0x1a0
? __pfx_do_trace_event_raw_event_event_da_monitor+0x10/0x10
? trace_event_sncid+0x83/0x200
trace_event_sncid+0x163/0x200
[...]
The buggy address belongs to the variable:
automaton_snep+0x4e0/0x5e0
This is caused by the tracepoints reading 32 bytes __array instead of
__string from the automata definition. Such strings are literals and
reading 32 bytes ends up in out of bound memory accesses (e.g. the next
automaton's data in this case).
The error is harmless as, while printing the string, we stop at the null
terminator, but it should still be fixed.
Use the __string facilities while defining the tracepoints to avoid
reading out of bound memory.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250728135022.255578-4-gmonaco@redhat.com
Fixes: 792575348ff7 ("rv/include: Add deterministic automata monitor definition via C macros")
Reviewed-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
RV event tracepoints print a line with the format:
"event_xyz: S0 x event -> S1 "
"event_xyz: S1 x event -> S0 (final)"
While printing an event leading to a non-final state, the line
has a trailing white space (visible above before the closing ").
Adapt the format string not to print the trailing whitespace if we are
not printing "(final)".
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250728135022.255578-3-gmonaco@redhat.com
Reviewed-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Argument 'p' of reactors_show() and monitor_reactor_show() is not a pointer
to struct rv_reactor, it is actually a pointer to the list_head inside
struct rv_reactor. Therefore it's wrong to cast 'p' to struct rv_reactor *.
This wrong type cast has been there since the beginning. But it still
worked because the list_head was the first field in struct rv_reactor_def.
This is no longer true since commit 3d3c376118b5 ("rv: Merge struct
rv_reactor_def into struct rv_reactor") moved the list_head, and this wrong
type cast became a functional problem.
Properly use container_of() instead.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/b4febbd6844311209e4c8768b65d508b81bd8c9b.1753625621.git.namcao@linutronix.de
Fixes: 3d3c376118b5 ("rv: Merge struct rv_reactor_def into struct rv_reactor")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Argument 'p' of monitors_show() is not a pointer to struct rv_monitor, it
is actually a pointer to the list_head inside struct rv_monitor. Therefore
it is wrong to cast 'p' to struct rv_monitor *.
This wrong type cast has been there since the beginning. But it still
worked because the list_head was the first field in struct rv_monitor_def.
This is no longer true since commit 24cbfe18d55a ("rv: Merge struct
rv_monitor_def into struct rv_monitor") moved the list_head, and this wrong
type cast became a functional problem.
Properly use container_of() instead.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/35e49e97696007919ceacf73796487a2e15a3d02.1753625621.git.namcao@linutronix.de
Fixes: 24cbfe18d55a ("rv: Merge struct rv_monitor_def into struct rv_monitor")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The field 'reacting' in struct rv_monitor is set but never used. Delete it.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/a6c16f845d2f1a09c4d0934ab83f3cb14478a71d.1753378331.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
rv_reactor has a reference counter to ensure it is not removed while
monitors are still using it.
However, this is futile, as __exit functions are not expected to fail and
will proceed normally despite rv_unregister_reactor() returning an error.
At the moment, reactors do not support being built as modules, therefore
they are never removed and the reference counters are not necessary.
If we support building RV reactors as modules in the future, kernel
module's centralized facilities such as try_module_get(), module_put() or
MODULE_SOFTDEP should be used instead of this custom implementation.
Remove this reference counter.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/bb946398436a5e17fb0f5b842ef3313c02291852.1753378331.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Each struct rv_reactor has a unique struct rv_reactor_def associated with
it. struct rv_reactor is statically allocated, while struct rv_reactor_def
is dynamically allocated.
This makes the code more complicated than it should be:
- Lookup is required to get the associated rv_reactor_def from rv_reactor
- Dynamic memory allocation is required for rv_reactor_def. This is
harder to get right compared to static memory. For instance, there is
an existing mistake: rv_unregister_reactor() does not free the memory
allocated by rv_register_reactor(). This is fortunately not a real
memory leak problem as rv_unregister_reactor() is never called.
Simplify and merge rv_reactor_def into rv_reactor.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/71cb91c86cd40df5b8c492b788787f2a73c3eaa3.1753378331.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Each struct rv_monitor has a unique struct rv_monitor_def associated with
it. struct rv_monitor is statically allocated, while struct rv_monitor_def
is dynamically allocated.
This makes the code more complicated than it should be:
- Lookup is required to get the associated rv_monitor_def from rv_monitor
- Dynamic memory allocation is required for rv_monitor_def. This is
harder to get right compared to static memory. For instance, there is
an existing mistake: rv_unregister_monitor() does not free the memory
allocated by rv_register_monitor(). This is fortunately not a real
memory leak problem, as rv_unregister_monitor() is never called.
Simplify and merge rv_monitor_def into rv_monitor.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/194449c00f87945c207aab4c96920c75796a4f53.1753378331.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
rv_monitor_def::task_monitor is not used. Delete it.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/502d94f2696435690a2b1fdbe80a9e56c96fcabf.1753378331.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Monitors generated with dot2k have their registration function (the one
called during monitor initialisation) return always 0, even if the
registration failed on RV side.
This can hide potential errors.
Return the value returned by the RV register function.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250723161240.194860-6-gmonaco@redhat.com
Reviewed-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The current behaviour of rvgen when running with the -a option is to
append the necessary lines at the end of the configuration for Kconfig,
Makefile and tracepoints.
This is not always the desired behaviour in case of nested monitors:
while tracepoints are not affected by nesting and the Makefile's only
requirement is that the parent monitor is built before its children, in
the Kconfig it is better to have children defined right after their
parent, otherwise the result has wrong indentation:
[*] foo_parent monitor
[*] foo_child1 monitor
[*] foo_child2 monitor
[*] bar_parent monitor
[*] bar_child1 monitor
[*] bar_child2 monitor
[*] foo_child3 monitor
[*] foo_child4 monitor
Adapt rvgen to look for a different marker for nested monitors in the
Kconfig file and append the line right after the last sibling, instead
of the last monitor.
Also add the marker when creating a new parent monitor.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250723161240.194860-5-gmonaco@redhat.com
Reviewed-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The dot2c.py script generates all states in a single line. This breaks the
100 column limit when the state machines are non-trivial.
Change dot2c.py to generate the states in separate lines in case the
generated line is going to be too long.
Also adapt existing monitors with line length over the limit.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250723161240.194860-4-gmonaco@redhat.com
Suggested-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Now that there are 2 monitors for real-time applications, users may want to
enable both of them simultaneously. Make the number of per-task monitor
configurable. Default it to 2 for now.
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/93e83313fc4ba7f6e66f4abe80ca5f5494d658d0.1752088709.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add a monitor for checking that real-time tasks do not go to sleep in a
manner that may cause undesirable latency.
Also change
RV depends on TRACING
to
RV select TRACING
to avoid the following recursive dependency:
error: recursive dependency detected!
symbol TRACING is selected by PREEMPTIRQ_TRACEPOINTS
symbol PREEMPTIRQ_TRACEPOINTS depends on TRACE_IRQFLAGS
symbol TRACE_IRQFLAGS is selected by RV_MON_SLEEP
symbol RV_MON_SLEEP depends on RV
symbol RV depends on TRACING
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/75bc5bcc741d153aa279c95faf778dff35c5c8ad.1752088709.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Userspace real-time applications may have design flaws that they raise
page faults in real-time threads, and thus have unexpected latencies.
Add an linear temporal logic monitor to detect this scenario.
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/78fea8a2de6d058241d3c6502c1a92910772b0ed.1752088709.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add the container "rtapp" which is the monitor collection for detecting
problems with real-time applications. The monitors will be added in the
follow-up commits.
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/fb18b87631d386271de00959d8d4826f23fcd1cd.1752088709.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
While attempting to implement DA monitors for some complex specifications,
deterministic automaton is found to be inappropriate as the specification
language. The automaton is complicated, hard to understand, and
error-prone.
For these cases, linear temporal logic is more suitable as the
specification language.
Add support for linear temporal logic runtime verification monitor.
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/d366c1fed60ed4e8f6451f3c15a99755f2740b5f.1752088709.git.namcao@linutronix.de
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
CONFIG_DA_MON_EVENTS is not specific to deterministic automaton. It could
be used for other monitor types. Therefore rename it to
CONFIG_RV_MON_EVENTS.
This prepares for the introduction of linear temporal logic monitor.
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/507210517123d887c1d208aa2fd45ec69765d3f0.1752088709.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Each RV monitor has one static buffer to send to the reactors. If multiple
errors are detected simultaneously, the one buffer could be overwritten.
Instead, leave it to the reactors to handle buffering.
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Without "#undef TRACE_INCLUDE_FILE", there could be a build error due to
TRACE_INCLUDE_FILE being redefined. Therefore add it.
Also fix a typo while at it.
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/f805e074581e927bb176c742c981fa7675b6ebe5.1752088709.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When rv_is_container_monitor() is called on the last monitor in
rv_monitors_list, KASAN yells:
BUG: KASAN: global-out-of-bounds in rv_is_container_monitor+0x101/0x110
Read of size 8 at addr ffffffff97c7c798 by task setup/221
The buggy address belongs to the variable:
rv_monitors_list+0x18/0x40
This is due to list_next_entry() is called on the last entry in the list.
It wraps around to the first list_head, and the first list_head is not
embedded in struct rv_monitor_def.
Fix it by checking if the monitor is last in the list.
Cc: stable@vger.kernel.org
Cc: Gabriele Monaco <gmonaco@redhat.com>
Fixes: cb85c660fcd4 ("rv: Add option for nested monitors and include sched")
Link: https://lore.kernel.org/e85b5eeb7228bfc23b8d7d4ab5411472c54ae91b.1744355018.git.namcao@linutronix.de
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
RV doesn't support nested monitors having children monitors themselves
and exits with the EINVAL code. However, it returns without unlocking
the rv_interface_lock.
Unlock the lock before returning from the initialisation function.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/20250402071351.19864-2-gmonaco@redhat.com
Fixes: cb85c660fcd4 ("rv: Add option for nested monitors and include sched")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Closes: https://lore.kernel.org/r/202503310200.UBXGitB4-lkp@intel.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add 3 per-cpu monitors as part of the sched model:
* scpd: schedule called with preemption disabled
Monitor to ensure schedule is called with preemption disabled
* snep: schedule does not enable preempt
Monitor to ensure schedule does not enable preempt
* sncid: schedule not called with interrupt disabled
Monitor to ensure schedule is not called with interrupt disabled
To: Ingo Molnar <mingo@redhat.com>
To: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Link: https://lore.kernel.org/20250305140406.350227-6-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add a per-task monitor as part of the sched model:
* snroc: set non runnable on its own context
Monitor to ensure set_state happens only in the respective task's context
To: Ingo Molnar <mingo@redhat.com>
To: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Link: https://lore.kernel.org/20250305140406.350227-5-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add 2 per-cpu monitors as part of the sched model:
* sco: scheduling context operations
Monitor to ensure sched_set_state happens only in thread context
* tss: task switch while scheduling
Monitor to ensure sched_switch happens only in scheduling context
To: Ingo Molnar <mingo@redhat.com>
To: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Link: https://lore.kernel.org/20250305140406.350227-4-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Monitors describing complex systems, such as the scheduler, can easily
grow to the point where they are just hard to understand because of the
many possible state transitions.
Often it is possible to break such descriptions into smaller monitors,
sharing some or all events. Enabling those smaller monitors concurrently
is, in fact, testing the system as if we had one single larger monitor.
Splitting models into multiple specification is not only easier to
understand, but gives some more clues when we see errors.
Add the possibility to create container monitors, whose only purpose is
to host other nested monitors. Enabling a container monitor enables all
nested ones, but it's still possible to enable nested monitors
independently.
Add the sched monitor as first container, for now empty.
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/20250305140406.350227-3-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Some monitor files like the main header and the Kconfig are missing the
license identifier.
Add it to those and make sure the automatic generation script includes
the line in newly created monitors.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/20250218123121.253551-3-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
dot2k suggests a list of changes to the kernel tree while adding a
monitor: edit tracepoints header, Makefile, Kconfig and moving the
monitor folder. Those changes can be easily run automatically.
Add a flag to dot2k to alter the kernel source.
The kernel source directory can be either assumed from the PWD, or from
the running kernel, if installed.
This feature works best if the kernel tree is a git repository, so that
its easier to make sure there are no unintended changes.
The main RV files (e.g. Makefile) have now a comment placeholder that
can be useful for manual editing (e.g. to know where to add new
monitors) and it is used by the script to append the required lines.
We also slightly adapt the file handling functions in dot2k: __open_file
is now called __read_file and also closes the file before returning the
content; __create_file is now a more general __write_file, we no longer
return on FileExistsError (not thrown while opening), a new
__create_file simply calls __write_file specifying the monitor folder in
the path.
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20241227144752.362911-8-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
While creating a new monitor in RV, besides generating code from dot2k,
there are a few manual steps which can be tedious and error prone, like
adding the tracepoints, makefile lines and kconfig.
This patch restructures the existing monitors to keep some files in the
monitor's folder itself, which can be automatically generated by future
versions of dot2k.
Monitors have now their own Kconfig and tracepoint snippets. For
simplicity, the main tracepoint definition, is moved to the RV
directory, it defines only the tracepoint classes and includes the
monitor-specific tracepoints, which reside in the monitor directory.
Tracepoints and Kconfig no longer need to be copied and adapted from
existing ones but only need to be included in the main files.
The Makefile remains untouched since there's little advantage in having
a separated Makefile for each monitor with a single line and including
it in the main RV Makefile.
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20241227144752.362911-6-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Fix a typo in comments.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20240911114349.20449-1-algonell@gmail.com
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
no_llseek had been defined to NULL two years ago, in commit 868941b14441
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The patch updates the function documentation comment for
rv_en(dis)able_monitor to adhere to the kernel-doc specification.
Link: https://lore.kernel.org/linux-trace-kernel/20240520054239.61784-1-yang.lee@linux.alibaba.com
Fixes: 102227b970a15 ("rv: Add Runtime Verification (RV) interface")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing tools updates from Steven Rostedt:
- Add auto-analysis only option to rtla/timerlat
Add an --aa-only option to the tooling to perform only the auto
analysis and not to parse and format the data.
- Other minor fixes and clean ups
* tag 'trace-tools-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rtla/timerlat: Fix "Previous IRQ" auto analysis' line
rtla/timerlat: Add auto-analysis only option
rv: Remove redundant assignment to variable retval
rv: Fix addition on an uninitialized variable 'run'
rtla: Add .gitignore file
|
|
Variable retval is being assigned a value that is never read, it is
being re-assigned a new value in both paths of a following if statement.
Remove the assignment.
Cleans up clang-scan warning:
kernel/trace/rv/rv.c:293:2: warning: Value stored to 'retval' is never read [deadcode.DeadStores]
retval = count;
Link: https://lkml.kernel.org/r/20230418150018.3123753-1-colin.i.king@gmail.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Since commit 8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: linux-trace-devel@vger.kernel.org
Cc: linux-trace-kernel@vger.kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
The pointer ptr is being initialized with a value that is never read,
it is being updated later on a call to strim. Remove the extraneous
initialization.
Link: https://lkml.kernel.org/r/20230116161612.77192-1-colin.i.king@gmail.com
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
It makes sense to move the important monitor structure into rodata to
prevent accidental structure modification.
Link: https://lkml.kernel.org/r/20221122173648.4732-1-acarmina@redhat.com
Signed-off-by: Alessandro Carminati <acarmina@redhat.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add missing __init/__exit annotations to module init/exit funcs.
Link: https://lkml.kernel.org/r/20220922103208.162869-1-xiujianfeng@huawei.com
Fixes: 24bce201d798 ("tools/rv: Add dot2k")
Fixes: 8812d21219b9 ("rv/monitor: Add the wip monitor skeleton created by dot2k")
Fixes: ccc319dcb450 ("rv/monitor: Add the wwnr monitor")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The sparse tool complains as follows:
kernel/trace/rv/monitors/wwnr/wwnr.c:18:19:
warning: symbol 'rv_wwnr' was not declared. Should it be static?
The `rv_wwnr` symbol is not dereferenced by other extern files,
so add static qualifier for it.
So does wip module.
Link: https://lkml.kernel.org/r/20220824034357.2014202-2-zengheng4@huawei.com
Cc: <mingo@redhat.com>
Fixes: ccc319dcb450 ("rv/monitor: Add the wwnr monitor")
Fixes: 8812d21219b9 ("rv/monitor: Add the wip monitor skeleton created by dot2k")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add missing __init/__exit annotations to module init/exit funcs.
Link: https://lkml.kernel.org/r/20220906141210.132607-1-xiujianfeng@huawei.com
Fixes: 135b881ea885 ("rv/reactor: Add the printk reactor")
Fixes: e88043c0ac16 ("rv/reactor: Add the panic reactor")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Monitor's automata definition is only used locally, so make
them static for all existing monitors.
Link: https://lore.kernel.org/all/202208210332.gtHXje45-lkp@intel.com
Link: https://lore.kernel.org/all/202208210358.6HH3OrVs-lkp@intel.com
Link: https://lkml.kernel.org/r/a50e27c3738d6ef809f4201857229fed64799234.1661266564.git.bristot@kernel.org
Fixes: ccc319dcb450 ("rv/monitor: Add the wwnr monitor")
Fixes: 8812d21219b9 ("rv/monitor: Add the wip monitor skeleton created by dot2k")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Unlock the "rv_interface_lock" mutex before returning.
Link: https://lkml.kernel.org/r/YuvYzNfGMgV+PIhd@kili
Fixes: 04acadcb4453 ("rv: Add runtime reactors interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Sample reactor that panics the system when an exception is found. This
is useful both to capture a vmcore, or to fail-safe a critical system.
Link: https://lkml.kernel.org/r/729aae3aba95f35738b8f8180e626d747d1d9da2.1659052063.git.bristot@kernel.org
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
A reactor that printks the reaction message.
Link: https://lkml.kernel.org/r/b65f18a7fd6dc6659a3008fd7b7392de3465d47b.1659052063.git.bristot@kernel.org
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
