| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracepoint cleanup from Steven Rostedt:
"Remove or hide unused tracepoints
Tracepoints take up memory (around 5K per tracepoint) even when they
are unused. Changes are being made to detect when a tracepoint is
defined but unused and a warning is shown at build. But those changes
are not yet ready for inclusion.
- Fix some of the unused tracepoints that it detected
Some tracepoints were removed and others were hidden by config
settings to match the config settings of where they are
instantiated. Some tracepoints were moved into architecture
specific code as only one architecture used them.
- Call the ftrace_test_filter tracepoint in an unreachable if
statement
The ftrace_test_filter tracepoint which is defined when ftrace
selftests are configured and is used to test the filter logic, but
the tracepoint is not actually called. It is put into an if
statement to not have it get compiled out, but also not warn for
not being used"
* tag 'trace-unused-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: sched: Hide numa events under CONFIG_NUMA_BALANCING
powerpc/thp: tracing: Hide hugepage events under CONFIG_PPC_BOOK3S_64
tracing: Call trace_ftrace_test_filter() for the event
tracing: arm: arm64: Hide trace events ipi_raise, ipi_entry and ipi_exit
binder: Remove unused binder lock events
PM: tracing: Hide power_domain_target event under ARCH_OMAP2PLUS
PM: tracing: Hide device_pm_callback events under PM_SLEEP
PM: tracing: Hide psci_domain_idle events under ARM_PSCI_CPUIDLE
PM: cpufreq: powernv/tracing: Move powernv_throttle trace event
alarmtimer: Hide alarmtimer_suspend event when RTC_CLASS is not configured
tracing, AER: Hide PCIe AER event when PCIEAER is not configured
|
|
Add the following tracepoint:
* sched_set_need_resched(tsk, cpu, tif)
Called when a task is set the need resched [lazy] flag
Remove the unused ip parameter from sched_entry and sched_exit and alter
sched_entry to have a value of preempt consistent with the one used in
sched_switch.
Also adapt all monitors using sched_{entry,exit} to avoid breaking build.
These tracepoints are useful to describe the Linux task model and are
adapted from the patches by Daniel Bristot de Oliveira
(https://bristot.me/linux-task-model/).
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Nam Cao <namcao@linutronix.de>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250728135022.255578-7-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The events sched_move_numa, sched_stick_numa and sched_swap_numa are only
called when CONFIG_NUMA_BALANCING is configured. As each event can take up
to 5K of memory in text and meta data regardless if they are used or not,
they should not be defined when unused.
Move the #ifdef CONFIG_NUMA_BALANCING to hide these events as well.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/20250612100552.39672cf9@batman.local.home
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "Add folio_mk_pte()" from Matthew Wilcox simplifies the act of
creating a pte which addresses the first page in a folio and reduces
the amount of plumbing which architecture must implement to provide
this.
- "Misc folio patches for 6.16" from Matthew Wilcox is a shower of
largely unrelated folio infrastructure changes which clean things up
and better prepare us for future work.
- "memory,x86,acpi: hotplug memory alignment advisement" from Gregory
Price adds early-init code to prevent x86 from leaving physical
memory unused when physical address regions are not aligned to memory
block size.
- "mm/compaction: allow more aggressive proactive compaction" from
Michal Clapinski provides some tuning of the (sadly, hard-coded (more
sadly, not auto-tuned)) thresholds for our invokation of proactive
compaction. In a simple test case, the reduction of a guest VM's
memory consumption was dramatic.
- "Minor cleanups and improvements to swap freeing code" from Kemeng
Shi provides some code cleaups and a small efficiency improvement to
this part of our swap handling code.
- "ptrace: introduce PTRACE_SET_SYSCALL_INFO API" from Dmitry Levin
adds the ability for a ptracer to modify syscalls arguments. At this
time we can alter only "system call information that are used by
strace system call tampering, namely, syscall number, syscall
arguments, and syscall return value.
This series should have been incorporated into mm.git's "non-MM"
branch, but I goofed.
- "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard regions" from
Andrei Vagin extends the info returned by the PAGEMAP_SCAN ioctl
against /proc/pid/pagemap. This permits CRIU to more efficiently get
at the info about guard regions.
- "Fix parameter passed to page_mapcount_is_type()" from Gavin Shan
implements that fix. No runtime effect is expected because
validate_page_before_insert() happens to fix up this error.
- "kernel/events/uprobes: uprobe_write_opcode() rewrite" from David
Hildenbrand basically brings uprobe text poking into the current
decade. Remove a bunch of hand-rolled implementation in favor of
using more current facilities.
- "mm/ptdump: Drop assumption that pxd_val() is u64" from Anshuman
Khandual provides enhancements and generalizations to the pte dumping
code. This might be needed when 128-bit Page Table Descriptors are
enabled for ARM.
- "Always call constructor for kernel page tables" from Kevin Brodsky
ensures that the ctor/dtor is always called for kernel pgtables, as
it already is for user pgtables.
This permits the addition of more functionality such as "insert hooks
to protect page tables". This change does result in various
architectures performing unnecesary work, but this is fixed up where
it is anticipated to occur.
- "Rust support for mm_struct, vm_area_struct, and mmap" from Alice
Ryhl adds plumbing to permit Rust access to core MM structures.
- "fix incorrectly disallowed anonymous VMA merges" from Lorenzo
Stoakes takes advantage of some VMA merging opportunities which we've
been missing for 15 years.
- "mm/madvise: batch tlb flushes for MADV_DONTNEED and MADV_FREE" from
SeongJae Park optimizes process_madvise()'s TLB flushing.
Instead of flushing each address range in the provided iovec, we
batch the flushing across all the iovec entries. The syscall's cost
was approximately halved with a microbenchmark which was designed to
load this particular operation.
- "Track node vacancy to reduce worst case allocation counts" from
Sidhartha Kumar makes the maple tree smarter about its node
preallocation.
stress-ng mmap performance increased by single-digit percentages and
the amount of unnecessarily preallocated memory was dramaticelly
reduced.
- "mm/gup: Minor fix, cleanup and improvements" from Baoquan He removes
a few unnecessary things which Baoquan noted when reading the code.
- ""Enhance sysfs handling for memory hotplug in weighted interleave"
from Rakie Kim "enhances the weighted interleave policy in the memory
management subsystem by improving sysfs handling, fixing memory
leaks, and introducing dynamic sysfs updates for memory hotplug
support". Fixes things on error paths which we are unlikely to hit.
- "mm/damon: auto-tune DAMOS for NUMA setups including tiered memory"
from SeongJae Park introduces new DAMOS quota goal metrics which
eliminate the manual tuning which is required when utilizing DAMON
for memory tiering.
- "mm/vmalloc.c: code cleanup and improvements" from Baoquan He
provides cleanups and small efficiency improvements which Baoquan
found via code inspection.
- "vmscan: enforce mems_effective during demotion" from Gregory Price
changes reclaim to respect cpuset.mems_effective during demotion when
possible. because presently, reclaim explicitly ignores
cpuset.mems_effective when demoting, which may cause the cpuset
settings to violated.
This is useful for isolating workloads on a multi-tenant system from
certain classes of memory more consistently.
- "Clean up split_huge_pmd_locked() and remove unnecessary folio
pointers" from Gavin Guo provides minor cleanups and efficiency gains
in in the huge page splitting and migrating code.
- "Use kmem_cache for memcg alloc" from Huan Yang creates a slab cache
for `struct mem_cgroup', yielding improved memory utilization.
- "add max arg to swappiness in memory.reclaim and lru_gen" from
Zhongkun He adds a new "max" argument to the "swappiness=" argument
for memory.reclaim MGLRU's lru_gen.
This directs proactive reclaim to reclaim from only anon folios
rather than file-backed folios.
- "kexec: introduce Kexec HandOver (KHO)" from Mike Rapoport is the
first step on the path to permitting the kernel to maintain existing
VMs while replacing the host kernel via file-based kexec. At this
time only memblock's reserve_mem is preserved.
- "mm: Introduce for_each_valid_pfn()" from David Woodhouse provides
and uses a smarter way of looping over a pfn range. By skipping
ranges of invalid pfns.
- "sched/numa: Skip VMA scanning on memory pinned to one NUMA node via
cpuset.mems" from Libo Chen removes a lot of pointless VMA scanning
when a task is pinned a single NUMA mode.
Dramatic performance benefits were seen in some real world cases.
- "JFS: Implement migrate_folio for jfs_metapage_aops" from Shivank
Garg addresses a warning which occurs during memory compaction when
using JFS.
- "move all VMA allocation, freeing and duplication logic to mm" from
Lorenzo Stoakes moves some VMA code from kernel/fork.c into the more
appropriate mm/vma.c.
- "mm, swap: clean up swap cache mapping helper" from Kairui Song
provides code consolidation and cleanups related to the folio_index()
function.
- "mm/gup: Cleanup memfd_pin_folios()" from Vishal Moola does that.
- "memcg: Fix test_memcg_min/low test failures" from Waiman Long
addresses some bogus failures which are being reported by the
test_memcontrol selftest.
- "eliminate mmap() retry merge, add .mmap_prepare hook" from Lorenzo
Stoakes commences the deprecation of file_operations.mmap() in favor
of the new file_operations.mmap_prepare().
The latter is more restrictive and prevents drivers from messing with
things in ways which, amongst other problems, may defeat VMA merging.
- "memcg: decouple memcg and objcg stocks"" from Shakeel Butt decouples
the per-cpu memcg charge cache from the objcg's one.
This is a step along the way to making memcg and objcg charging
NMI-safe, which is a BPF requirement.
- "mm/damon: minor fixups and improvements for code, tests, and
documents" from SeongJae Park is yet another batch of miscellaneous
DAMON changes. Fix and improve minor problems in code, tests and
documents.
- "memcg: make memcg stats irq safe" from Shakeel Butt converts memcg
stats to be irq safe. Another step along the way to making memcg
charging and stats updates NMI-safe, a BPF requirement.
- "Let unmap_hugepage_range() and several related functions take folio
instead of page" from Fan Ni provides folio conversions in the
hugetlb code.
* tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (285 commits)
mm: pcp: increase pcp->free_count threshold to trigger free_high
mm/hugetlb: convert use of struct page to folio in __unmap_hugepage_range()
mm/hugetlb: refactor __unmap_hugepage_range() to take folio instead of page
mm/hugetlb: refactor unmap_hugepage_range() to take folio instead of page
mm/hugetlb: pass folio instead of page to unmap_ref_private()
memcg: objcg stock trylock without irq disabling
memcg: no stock lock for cpu hot-unplug
memcg: make __mod_memcg_lruvec_state re-entrant safe against irqs
memcg: make count_memcg_events re-entrant safe against irqs
memcg: make mod_memcg_state re-entrant safe against irqs
memcg: move preempt disable to callers of memcg_rstat_updated
memcg: memcg_rstat_updated re-entrant safe against irqs
mm: khugepaged: decouple SHMEM and file folios' collapse
selftests/eventfd: correct test name and improve messages
alloc_tag: check mem_profiling_support in alloc_tag_init
Docs/damon: update titles and brief introductions to explain DAMOS
selftests/damon/_damon_sysfs: read tried regions directories in order
mm/damon/tests/core-kunit: add a test for damos_set_filters_default_reject()
mm/damon/paddr: remove unused variable, folio_list, in damon_pa_stat()
mm/damon/sysfs-schemes: fix wrong comment on damons_sysfs_quota_goal_metric_strs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Have module addresses get updated in the persistent ring buffer
The addresses of the modules from the previous boot are saved in the
persistent ring buffer. If the same modules are loaded and an address
is in the old buffer points to an address that was both saved in the
persistent ring buffer and is loaded in memory, shift the address to
point to the address that is loaded in memory in the trace event.
- Print function names for irqs off and preempt off callsites
When ignoring the print fmt of a trace event and just printing the
fields directly, have the fields for preempt off and irqs off events
still show the function name (via kallsyms) instead of just showing
the raw address.
- Clean ups of the histogram code
The histogram functions saved over 800 bytes on the stack to process
events as they come in. Instead, create per-cpu buffers that can hold
this information and have a separate location for each context level
(thread, softirq, IRQ and NMI).
Also add some more comments to the code.
- Add "common_comm" field for histograms
Add "common_comm" that uses the current->comm as a field in an event
histogram and acts like any of the other fields of the event.
- Show "subops" in the enabled_functions file
When the function graph infrastructure is used, a subsystem has a
"subops" that it attaches its callback function to. Instead of the
enabled_functions just showing a function calling the function that
calls the subops functions, also show the subops functions that will
get called for that function too.
- Add "copy_trace_marker" option to instances
There are cases where an instance is created for tooling to write
into, but the old tooling has the top level instance hardcoded into
the application. New tools want to consume the data from an instance
and not the top level buffer. By adding a copy_trace_marker option,
whenever the top instance trace_marker is written into, a copy of it
is also written into the instance with this option set. This allows
new tools to read what old tools are writing into the top buffer.
If this option is cleared by the top instance, then what is written
into the trace_marker is not written into the top instance. This is a
way to redirect the trace_marker writes into another instance.
- Have tracepoints created by DECLARE_TRACE() use trace_<name>_tp()
If a tracepoint is created by DECLARE_TRACE() instead of
TRACE_EVENT(), then it will not be exposed via tracefs. Currently
there's no way to differentiate in the kernel the tracepoint
functions between those that are exposed via tracefs or not. A
calling convention has been made manually to append a "_tp" prefix
for events created by DECLARE_TRACE(). Instead of doing this
manually, force it so that all DECLARE_TRACE() events have this
notation.
- Use __string() for task->comm in some sched events
Instead of hardcoding the comm to be TASK_COMM_LEN in some of the
scheduler events use __string() which makes it dynamic. Note, if
these events are parsed by user space it they may break, and the
event may have to be converted back to the hardcoded size.
- Have function graph "depth" be unsigned to the user
Internally to the kernel, the "depth" field of the function graph
event is signed due to -1 being used for end of boundary. What
actually gets recorded in the event itself is zero or positive.
Reflect this to user space by showing "depth" as unsigned int and be
consistent across all events.
- Allow an arbitrary long CPU string to osnoise_cpus_write()
The filtering of which CPUs to write to can exceed 256 bytes. If a
machine has 256 CPUs, and the filter is to filter every other CPU,
the write would take a string larger than 256 bytes. Instead of using
a fixed size buffer on the stack that is 256 bytes, allocate it to
handle what is passed in.
- Stop having ftrace check the per-cpu data "disabled" flag
The "disabled" flag in the data structure passed to most ftrace
functions is checked to know if tracing has been disabled or not.
This flag was added back in 2008 before the ring buffer had its own
way to disable tracing. The "disable" flag is now not always set when
needed, and the ring buffer flag should be used in all locations
where the disabled is needed. Since the "disable" flag is redundant
and incorrect, stop using it. Fix up some locations that use the
"disable" flag to use the ring buffer info.
- Use a new tracer_tracing_disable/enable() instead of data->disable
flag
There's a few cases that set the data->disable flag to stop tracing,
but this flag is not consistently used. It is also an on/off switch
where if a function set it and calls another function that sets it,
the called function may incorrectly enable it.
Use a new trace_tracing_disable() and tracer_tracing_enable() that
uses a counter and can be nested. These use the ring buffer flags
which are always checked making the disabling more consistent.
- Save the trace clock in the persistent ring buffer
Save what clock was used for tracing in the persistent ring buffer
and set it back to that clock after a reboot.
- Remove unused reference to a per CPU data pointer in mmiotrace
functions
- Remove unused buffer_page field from trace_array_cpu structure
- Remove more strncpy() instances
- Other minor clean ups and fixes
* tag 'trace-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (36 commits)
tracing: Fix compilation warning on arm32
tracing: Record trace_clock and recover when reboot
tracing/sched: Use __string() instead of fixed lengths for task->comm
tracepoint: Have tracepoints created with DECLARE_TRACE() have _tp suffix
tracing: Cleanup upper_empty() in pid_list
tracing: Allow the top level trace_marker to write into another instances
tracing: Add a helper function to handle the dereference arg in verifier
tracing: Remove unnecessary "goto out" that simply returns ret is trigger code
tracing: Fix error handling in event_trigger_parse()
tracing: Rename event_trigger_alloc() to trigger_data_alloc()
tracing: Replace deprecated strncpy() with strscpy() for stack_trace_filter_buf
tracing: Remove unused buffer_page field from trace_array_cpu structure
tracing: Use atomic_inc_return() for updating "disabled" counter in irqsoff tracer
tracing: Convert the per CPU "disabled" counter to local from atomic
tracing: branch: Use trace_tracing_is_on_cpu() instead of "disabled" field
ring-buffer: Add ring_buffer_record_is_on_cpu()
tracing: Do not use per CPU array_buffer.data->disabled for cpumask
ftrace: Do not disabled function graph based on "disabled" field
tracing: kdb: Use tracer_tracing_on/off() instead of setting per CPU disabled
tracing: Use tracer_tracing_disable() instead of "disabled" field for ftrace_dump_one()
...
|
|
The sched_switch and sched_waking events hardcoded the length of the comm
it recorded because these events were created before the dynamic strings
were implemented. Unfortunately, several other events copied this method.
As the size of the comm may change in the future, make the string dynamic.
The dynamic string requires a 4 byte meta data to hold the size and offset
of the string. The amount stored in the ring buffer will then be the
strlen(comm) + 5 (for the \n), and aligned to 4 bytes if there's no other
strings. This means that a task comm can have up to 10 characters before it
requires another 4 bytes in the ring buffer. Most tasks are usually less
than that, so this should not be a problem, and it also allows the name to
be extended over the TASK_COMM_LEN [1]
Note, sched_switch and the sched_waking trace events still hardcode the
length, as there is tooling that still requires that. An effort to update
the tooling will be made to allow this to change in the future.
[1] https://lore.kernel.org/all/20250507110444.963779-1-bhupesh@igalia.com/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Bhupesh <bhupesh@igalia.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/20250507133458.51bafd95@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Most tracepoints in the kernel are created with TRACE_EVENT(). The
TRACE_EVENT() macro (and DECLARE_EVENT_CLASS() and DEFINE_EVENT() where in
reality, TRACE_EVENT() is just a helper macro that calls those other two
macros), will create not only a tracepoint (the function trace_<event>()
used in the kernel), it also exposes the tracepoint to user space along
with defining what fields will be saved by that tracepoint.
There are a few places that tracepoints are created in the kernel that are
not exposed to userspace via tracefs. They can only be accessed from code
within the kernel. These tracepoints are created with DEFINE_TRACE()
Most of these tracepoints end with "_tp". This is useful as when the
developer sees that, they know that the tracepoint is for in-kernel only
(meaning it can only be accessed inside the kernel, either directly by the
kernel or indirectly via modules and BPF programs) and is not exposed to
user space.
Instead of making this only a process to add "_tp", enforce it by making
the DECLARE_TRACE() append the "_tp" suffix to the tracepoint. This
requires adding DECLARE_TRACE_EVENT() macros for the TRACE_EVENT() macro
to use that keeps the original name.
Link: https://lore.kernel.org/all/20250418083351.20a60e64@gandalf.local.home/
Cc: netdev <netdev@vger.kernel.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Juri Lelli <juri.lelli@gmail.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/20250510163730.092fad5b@gandalf.local.home
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
cpuset memory pinning
Unlike sched_skip_vma_numa tracepoint which tracks skipped VMAs, this
tracks the task subjected to cpuset.mems pinning and prints out its
allowed memory node mask.
Link: https://lkml.kernel.org/r/20250424024523.2298272-3-libo.chen@oracle.com
Signed-off-by: Libo Chen <libo.chen@oracle.com>
Cc: "Chen, Tim C" <tim.c.chen@intel.com>
Cc: Chen Yu <yu.c.chen@intel.com>
Cc: Chris Hyser <chris.hyser@oracle.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mel Gorman <mgorman <mgorman@suse.de>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Srikanth Aithal <sraithal@amd.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It is useful to be able to access current->mm at task exit to, say,
record a bunch of VMA information right before the task exits (e.g., for
stack symbolization reasons when dealing with short-lived processes that
exit in the middle of profiling session). Currently,
trace_sched_process_exit() is triggered after exit_mm() which resets
current->mm to NULL making this tracepoint unsuitable for inspecting
and recording task's mm_struct-related data when tracing process
lifetimes.
There is a particularly suitable place, though, right after
taskstats_exit() is called, but before we do exit_mm() and other
exit_*() resource teardowns. taskstats performs a similar kind of
accounting that some applications do with BPF, and so co-locating them
seems like a good fit. So that's where trace_sched_process_exit() is
moved with this patch.
Also, existing trace_sched_process_exit() tracepoint is notoriously
missing `group_dead` flag that is certainly useful in practice and some
of our production applications have to work around this. So plumb
`group_dead` through while at it, to have a richer and more complete
tracepoint.
Note that we can't use sched_process_template anymore, and so we use
TRACE_EVENT()-based tracepoint definition. But all the field names and
order, as well as assign and output logic remain intact. We just add one
extra field at the end in backwards-compatible way.
Document the dependency to sched_process_template anyway.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250402180925.90914-1-andrii@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull latency tracing updates from Steven Rostedt:
- Add some trace events to osnoise and timerlat sample generation
This adds more information to the osnoise and timerlat tracers as
well as allows BPF programs to be attached to these locations to
extract even more data.
- Fix to DECLARE_TRACE_CONDITION() macro
It wasn't used but now will be and it happened to be broken causing
the build to fail.
- Add scheduler specification monitors to runtime verifier (RV)
This is a continuation of Daniel Bristot's work.
RV allows monitors to run and react concurrently. Running the
cumulative model is equivalent to running single components using the
same reactors, with the advantage that it's easier to point out which
specification failed in case of error.
This update introduces nested monitors to RV, in short, the sysfs
monitor folder will contain a monitor named sched, which is nothing
but an empty container for other monitors. Controlling the sched
monitor (enable, disable, set reactors) controls all nested monitors.
The following scheduling monitors are added:
- sco: scheduling context operations
Monitor to ensure sched_set_state happens only in thread context
- tss: task switch while scheduling
Monitor to ensure sched_switch happens only in scheduling context
- snroc: set non runnable on its own context
Monitor to ensure set_state happens only in the respective task's context
- scpd: schedule called with preemption disabled
Monitor to ensure schedule is called with preemption disabled
- snep: schedule does not enable preempt
Monitor to ensure schedule does not enable preempt
- sncid: schedule not called with interrupt disabled
Monitor to ensure schedule is not called with interrupt disabled
* tag 'trace-latency-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tools/rv: Allow rv list to filter for container
Documentation/rv: Add docs for the sched monitors
verification/dot2k: Add support for nested monitors
tools/rv: Add support for nested monitors
rv: Add scpd, snep and sncid per-cpu monitors
rv: Add snroc per-task monitor
rv: Add sco and tss per-cpu monitors
rv: Add option for nested monitors and include sched
sched: Add sched tracepoints for RV task model
rv: Add license identifiers to monitor files
tracing: Fix DECLARE_TRACE_CONDITION
trace/osnoise: Add trace events for samples
|
|
Add the following tracepoints:
* sched_entry(bool preempt, ip)
Called while entering __schedule
* sched_exit(bool is_switch, ip)
Called while exiting __schedule
* sched_set_state(task, curr_state, state)
Called when a task changes its state (to and from running)
These tracepoints are useful to describe the Linux task model and are
adapted from the patches by Daniel Bristot de Oliveira
(https://bristot.me/linux-task-model/).
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/20250305140406.350227-2-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
All the big Linux distros enable CONFIG_SCHED_DEBUG, because
the various features it provides help not just with kernel
development, but with system administration and user-space
software development as well.
Reflect this reality and enable this functionality
unconditionally.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250317104257.3496611-4-mingo@kernel.org
|
|
Switch the order of prev_comm and next_comm in sched_switch's code to
align with its printing order.
Cc: <mhiramat@kernel.org>
Signed-off-by: Tio Zhang <tiozhang@didiglobal.com>
Link: https://lore.kernel.org/20240703033353.GA2833@didi-ThinkCentre-M930t-N000
Reviewed-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Add cpufreq pressure feedback for the scheduler
- Rework misfit load-balancing wrt affinity restrictions
- Clean up and simplify the code around ::overutilized and
::overload access.
- Simplify sched_balance_newidle()
- Bump SCHEDSTAT_VERSION to 16 due to a cleanup of CPU_MAX_IDLE_TYPES
handling that changed the output.
- Rework & clean up <asm/vtime.h> interactions wrt arch_vtime_task_switch()
- Reorganize, clean up and unify most of the higher level
scheduler balancing function names around the sched_balance_*()
prefix
- Simplify the balancing flag code (sched_balance_running)
- Miscellaneous cleanups & fixes
* tag 'sched-core-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
sched/pelt: Remove shift of thermal clock
sched/cpufreq: Rename arch_update_thermal_pressure() => arch_update_hw_pressure()
thermal/cpufreq: Remove arch_update_thermal_pressure()
sched/cpufreq: Take cpufreq feedback into account
cpufreq: Add a cpufreq pressure feedback for the scheduler
sched/fair: Fix update of rd->sg_overutilized
sched/vtime: Do not include <asm/vtime.h> header
s390/irq,nmi: Include <asm/vtime.h> header directly
s390/vtime: Remove unused __ARCH_HAS_VTIME_TASK_SWITCH leftover
sched/vtime: Get rid of generic vtime_task_switch() implementation
sched/vtime: Remove confusing arch_vtime_task_switch() declaration
sched/balancing: Simplify the sg_status bitmask and use separate ->overloaded and ->overutilized flags
sched/fair: Rename set_rd_overutilized_status() to set_rd_overutilized()
sched/fair: Rename SG_OVERLOAD to SG_OVERLOADED
sched/fair: Rename {set|get}_rd_overload() to {set|get}_rd_overloaded()
sched/fair: Rename root_domain::overload to ::overloaded
sched/fair: Use helper functions to access root_domain::overload
sched/fair: Check root_domain::overload value before update
sched/fair: Combine EAS check with root_domain::overutilized access
sched/fair: Simplify the continue_balancing logic in sched_balance_newidle()
...
|
|
arch_update_hw_pressure()
Now that cpufreq provides a pressure value to the scheduler, rename
arch_update_thermal_pressure into HW pressure to reflect that it returns
a pressure applied by HW (i.e. with a high frequency change) and not
always related to thermal mitigation but also generated by max current
limitation as an example. Such high frequency signal needs filtering to be
smoothed and provide an value that reflects the average available capacity
into the scheduler time scale.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Qais Yousef <qyousef@layalina.io>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20240326091616.3696851-5-vincent.guittot@linaro.org
|
|
Add "sched_prepare_exec" tracepoint, which is run right after the point
of no return but before the current task assumes its new exec identity.
Unlike the tracepoint "sched_process_exec", the "sched_prepare_exec"
tracepoint runs before flushing the old exec, i.e. while the task still
has the original state (such as original MM), but when the new exec
either succeeds or crashes (but never returns to the original exec).
Being able to trace this event can be helpful in a number of use cases:
* allowing tracing eBPF programs access to the original MM on exec,
before current->mm is replaced;
* counting exec in the original task (via perf event);
* profiling flush time ("sched_prepare_exec" to "sched_process_exec").
Example of tracing output:
$ cat /sys/kernel/debug/tracing/trace_pipe
<...>-379 [003] ..... 179.626921: sched_prepare_exec: interp=/usr/bin/sshd filename=/usr/bin/sshd pid=379 comm=sshd
<...>-381 [002] ..... 180.048580: sched_prepare_exec: interp=/bin/bash filename=/bin/bash pid=381 comm=sshd
<...>-385 [001] ..... 180.068277: sched_prepare_exec: interp=/usr/bin/tty filename=/usr/bin/tty pid=385 comm=bash
<...>-389 [006] ..... 192.020147: sched_prepare_exec: interp=/usr/bin/dmesg filename=/usr/bin/dmesg pid=389 comm=bash
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240411102158.1272267-1-elver@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Tracing the runtime delta makes sense, observer can sum over time.
Tracing the absolute vruntime makes less sense, inconsistent:
absolute-vs-delta, but also vruntime delta can be computed from
runtime delta.
Removing the vruntime thing also makes the two tracepoint sites
identical, allowing to unify the code in a later patch.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
VMAs are skipped if there is no recent fault activity but this represents
a chicken-and-egg problem as there may be no fault activity if the PTEs
are never updated to trap NUMA hints. There is an indirect reliance on
scanning to be forced early in the lifetime of a task but this may fail
to detect changes in phase behaviour. Force inactive VMAs to be scanned
when all other eligible VMAs have been updated within the same scan
sequence.
Test results in general look good with some changes in performance, both
negative and positive, depending on whether the additional scanning and
faulting was beneficial or not to the workload. The autonuma benchmark
workload NUMA01_THREADLOCAL was picked for closer examination. The workload
creates two processes with numerous threads and thread-local storage that
is zero-filled in a loop. It exercises the corner case where unrelated
threads may skip VMAs that are thread-local to another thread and still
has some VMAs that inactive while the workload executes.
The VMA skipping activity frequency with and without the patch:
6.6.0-rc2-sched-numabtrace-v1
=============================
649 reason=scan_delay
9,094 reason=unsuitable
48,915 reason=shared_ro
143,919 reason=inaccessible
193,050 reason=pid_inactive
6.6.0-rc2-sched-numabselective-v1
=============================
146 reason=seq_completed
622 reason=ignore_pid_inactive
624 reason=scan_delay
6,570 reason=unsuitable
16,101 reason=shared_ro
27,608 reason=inaccessible
41,939 reason=pid_inactive
Note that with the patch applied, the PID activity is ignored
(ignore_pid_inactive) to ensure a VMA with some activity is completely
scanned. In addition, a small number of VMAs are scanned when no other
eligible VMA is available during a single scan window (seq_completed).
The number of times a VMA is skipped due to no PID activity from the
scanning task (pid_inactive) drops dramatically. It is expected that
this will increase the number of PTEs updated for NUMA hinting faults
as well as hinting faults but these represent PTEs that would otherwise
have been missed. The tradeoff is scan+fault overhead versus improving
locality due to migration.
On a 2-socket Cascade Lake test machine, the time to complete the
workload is as follows;
6.6.0-rc2 6.6.0-rc2
sched-numabtrace-v1 sched-numabselective-v1
Min elsp-NUMA01_THREADLOCAL 174.22 ( 0.00%) 117.64 ( 32.48%)
Amean elsp-NUMA01_THREADLOCAL 175.68 ( 0.00%) 123.34 * 29.79%*
Stddev elsp-NUMA01_THREADLOCAL 1.20 ( 0.00%) 4.06 (-238.20%)
CoeffVar elsp-NUMA01_THREADLOCAL 0.68 ( 0.00%) 3.29 (-381.70%)
Max elsp-NUMA01_THREADLOCAL 177.18 ( 0.00%) 128.03 ( 27.74%)
The time to complete the workload is reduced by almost 30%:
6.6.0-rc2 6.6.0-rc2
sched-numabtrace-v1 sched-numabselective-v1 /
Duration User 91201.80 63506.64
Duration System 2015.53 1819.78
Duration Elapsed 1234.77 868.37
In this specific case, system CPU time was not increased but it's not
universally true.
From vmstat, the NUMA scanning and fault activity is as follows;
6.6.0-rc2 6.6.0-rc2
sched-numabtrace-v1 sched-numabselective-v1
Ops NUMA base-page range updates 64272.00 26374386.00
Ops NUMA PTE updates 36624.00 55538.00
Ops NUMA PMD updates 54.00 51404.00
Ops NUMA hint faults 15504.00 75786.00
Ops NUMA hint local faults % 14860.00 56763.00
Ops NUMA hint local percent 95.85 74.90
Ops NUMA pages migrated 1629.00 6469222.00
Both the number of PTE updates and hint faults is dramatically
increased. While this is superficially unfortunate, it represents
ranges that were simply skipped without the patch. As a result
of the scanning and hinting faults, many more pages were also
migrated but as the time to completion is reduced, the overhead
is offset by the gain.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Raghavendra K T <raghavendra.kt@amd.com>
Link: https://lore.kernel.org/r/20231010083143.19593-7-mgorman@techsingularity.net
|
|
NUMA Balancing skips VMAs when the current task has not trapped a NUMA
fault within the VMA. If the VMA is skipped then mm->numa_scan_offset
advances and a task that is trapping faults within the VMA may never
fully update PTEs within the VMA.
Force tasks to update PTEs for partially scanned PTEs. The VMA will
be tagged for NUMA hints by some task but this removes some of the
benefit of tracking PID activity within a VMA. A follow-on patch
will mitigate this problem.
The test cases and machines evaluated did not trigger the corner case so
the performance results are neutral with only small changes within the
noise from normal test-to-test variance. However, the next patch makes
the corner case easier to trigger.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Raghavendra K T <raghavendra.kt@amd.com>
Link: https://lore.kernel.org/r/20231010083143.19593-6-mgorman@techsingularity.net
|
|
NUMA balancing skips or scans VMAs for a variety of reasons. In preparation
for completing scans of VMAs regardless of PID access, trace the reasons
why a VMA was skipped. In a later patch, the tracing will be used to track
if a VMA was forcibly scanned.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20231010083143.19593-4-mgorman@techsingularity.net
|
|
It was useful to track feec() placement decision and debug the spare
capacity and optimization issues vs uclamp_max.
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230916232955.2099394-4-qyousef@layalina.io
|
|
Commit fa2c3254d7cf (sched/tracing: Don't re-read p->state when emitting
sched_switch event, 2022-01-20) added a new prev_state argument to the
sched_switch tracepoint, before the prev task_struct pointer.
This reordering of arguments broke BPF programs that use the raw
tracepoint (e.g. tp_btf programs). The type of the second argument has
changed and existing programs that assume a task_struct* argument
(e.g. for bpf_task_storage access) will now fail to verify.
If we instead append the new argument to the end, all existing programs
would continue to work and can conditionally extract the prev_state
argument on supported kernel versions.
Fixes: fa2c3254d7cf (sched/tracing: Don't re-read p->state when emitting sched_switch event, 2022-01-20)
Signed-off-by: Delyan Kratunov <delyank@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lkml.kernel.org/r/c8a6930dfdd58a4a5755fc01732675472979732b.camel@fb.com
|
|
As of commit
c6e7bd7afaeb ("sched/core: Optimize ttwu() spinning on p->on_cpu")
the following sequence becomes possible:
p->__state = TASK_INTERRUPTIBLE;
__schedule()
deactivate_task(p);
ttwu()
READ !p->on_rq
p->__state=TASK_WAKING
trace_sched_switch()
__trace_sched_switch_state()
task_state_index()
return 0;
TASK_WAKING isn't in TASK_REPORT, so the task appears as TASK_RUNNING in
the trace event.
Prevent this by pushing the value read from __schedule() down the trace
event.
Reported-by: Abhijeet Dharmapurikar <adharmap@quicinc.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20220120162520.570782-2-valentin.schneider@arm.com
|
|
'success' is left here for a long time and also it is meaningless
for the upper user. Just remove it.
[ There were some tools expecting this, and this may break them. But
hopefully they've been fixed in the mean time. Otherwise this may be
likely reverted - SDR ]
Link: https://lkml.kernel.org/r/20210422122226.9415-1-ed.tsai@mediatek.com
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ed Tsai <ed.tsai@mediatek.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Fix ~59 single-word typos in the tracing code comments, and fix
the grammar in a handful of places.
Link: https://lore.kernel.org/r/20210322224546.GA1981273@gmail.com
Link: https://lkml.kernel.org/r/20210323174935.GA4176821@gmail.com
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
The old _do_fork() helper has been removed in favor of kernel_clone().
Here correct some comments which still contain _do_fork()
Link: https://lore.kernel.org/r/20210111104807.18022-1-yanfei.xu@windriver.com
Cc: christian@brauner.io
Cc: linux-kernel@vger.kernel.org
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Yanfei Xu <yanfei.xu@windriver.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
While migrating some code from wq to kthread_worker, I found that I missed
the execute_start/end tracepoints. So add similar tracepoints for
kthread_work. And for completeness, queue_work tracepoint (although this
one differs slightly from the matching workqueue tracepoint).
Link: https://lkml.kernel.org/r/20201010180323.126634-1-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Phil Auld <pauld@redhat.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Thara Gopinath <thara.gopinath@linaro.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Vincent Donnefort <vincent.donnefort@arm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Ilias Stamatis <stamatis.iliass@gmail.com>
Cc: Liang Chen <cl@rock-chips.com>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: "J. Bruce Fields" <bfields@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
rq->cpu_capacity is a key element in several scheduler parts, such as EAS
task placement and load balancing. Tracking this value enables testing
and/or debugging by a toolkit.
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1598605249-72651-1-git-send-email-vincent.donnefort@arm.com
|
|
Change "It it" to "It is".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/25305c1d-4ee8-e091-d20f-e700ddad49fd@infradead.org
|
|
Add a bare tracepoint trace_sched_update_nr_running_tp which tracks
->nr_running CPU's rq. This is used to accurately trace this data and
provide a visualization of scheduler imbalances in, for example, the
form of a heat map. The tracepoint is accessed by loading an external
kernel module. An example module (forked from Qais' module and including
the pelt related tracepoints) can be found at:
https://github.com/auldp/tracepoints-helpers.git
A script to turn the trace-cmd report output into a heatmap plot can be
found at:
https://github.com/jirvoz/plot-nr-running
The tracepoints are added to add_nr_running() and sub_nr_running() which
are in kernel/sched/sched.h. In order to avoid CREATE_TRACE_POINTS in
the header a wrapper call is used and the trace/events/sched.h include
is moved before sched.h in kernel/sched/core.
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200629192303.GC120228@lorien.usersys.redhat.com
|
|
The util_est signals are key elements for EAS task placement and
frequency selection. Having tracepoints to track these signals enables
load-tracking and schedutil testing and/or debugging by a toolkit.
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/1590597554-370150-1-git-send-email-vincent.donnefort@arm.com
|
|
Extrapolating on the existing framework to track rt/dl utilization using
pelt signals, add a similar mechanism to track thermal pressure. The
difference here from rt/dl utilization tracking is that, instead of
tracking time spent by a CPU running a RT/DL task through util_avg, the
average thermal pressure is tracked through load_avg. This is because
thermal pressure signal is weighted time "delta" capacity unlike util_avg
which is binary. "delta capacity" here means delta between the actual
capacity of a CPU and the decreased capacity a CPU due to a thermal event.
In order to track average thermal pressure, a new sched_avg variable
avg_thermal is introduced. Function update_thermal_load_avg can be called
to do the periodic bookkeeping (accumulate, decay and average) of the
thermal pressure.
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200222005213.3873-2-thara.gopinath@linaro.org
|
|
sched:sched_stick_numa is meant to fire when a task is unable to migrate
to the preferred node but from the trace, it's possibile to tell the
difference between "no CPU found", "migration to idle CPU failed" and
"tasks could not be swapped". Extend the tracepoint accordingly.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
[ Minor edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Hillf Danton <hdanton@sina.com>
Link: https://lore.kernel.org/r/20200224095223.13361-4-mgorman@techsingularity.net
|
|
The new tracepoint allows us to track the changes in overutilized
status.
Overutilized status is associated with EAS. It indicates that the system
is in high performance state. EAS is disabled when the system is in this
state since there's not much energy savings while high performance tasks
are pushing the system to the limit and it's better to default to the
spreading behavior of the scheduler.
This tracepoint helps understanding and debugging the conditions under
which this happens.
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavankumar Kondeti <pkondeti@codeaurora.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Uwe Kleine-Konig <u.kleine-koenig@pengutronix.de>
Link: https://lkml.kernel.org/r/20190604111459.2862-6-qais.yousef@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The new tracepoint allows tracking PELT signals at sched_entity level.
Which is supported in CFS tasks and taskgroups only.
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavankumar Kondeti <pkondeti@codeaurora.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Uwe Kleine-Konig <u.kleine-koenig@pengutronix.de>
Link: https://lkml.kernel.org/r/20190604111459.2862-5-qais.yousef@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The new tracepoints allow tracking PELT signals at rq level for all
scheduling classes + irq.
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavankumar Kondeti <pkondeti@codeaurora.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Uwe Kleine-Konig <u.kleine-koenig@pengutronix.de>
Link: https://lkml.kernel.org/r/20190604111459.2862-4-qais.yousef@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
not set
The tracepoints trace_sched_stat_{iowait, blocked, wait, sleep} should
be not exposed to user if CONFIG_SCHEDSTATS is not set.
Link: http://lkml.kernel.org/r/1553602391-11926-3-git-send-email-laoar.shao@gmail.com
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
commit 3f5fe9fef5b2 ("sched/debug: Fix task state recording/printout")
tried to fix the problem introduced by a previous commit efb40f588b43
("sched/tracing: Fix trace_sched_switch task-state printing"). However
the prev_state output in sched_switch is still broken.
task_state_index() uses fls() which considers the LSB as 1. Left
shifting 1 by this value gives an incorrect mapping to the task state.
Fix this by decrementing the value returned by __get_task_state()
before shifting.
Link: http://lkml.kernel.org/r/1540882473-1103-1-git-send-email-pkondeti@codeaurora.org
Cc: stable@vger.kernel.org
Fixes: 3f5fe9fef5b2 ("sched/debug: Fix task state recording/printout")
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
include/trace/events/sched.h includes <linux/sched.h> (via
<linux/sched/numa_balancing.h>) and so knows about the TASK_* constants
used to interpret .prev_state. So instead of duplicating the magic
numbers make use of the defined macros to ease understanding the
mapping from state bits to letters which isn't completely intuitive for
an outsider.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel@pengutronix.de
Link: http://lkml.kernel.org/r/20180905093636.24068-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Since the following commit:
b91473ff6e97 ("sched,tracing: Update trace_sched_pi_setprio()")
the sched_pi_setprio trace point shows the "newprio" during a deboost:
|futex sched_pi_setprio: comm=futex_requeue_p pid"34 oldprio newprio=3D98
|futex sched_switch: prev_comm=futex_requeue_p prev_pid"34 prev_prio=120
This patch open codes __rt_effective_prio() in the tracepoint as the
'newprio' to get the old behaviour back / the correct priority:
|futex sched_pi_setprio: comm=futex_requeue_p pid"20 oldprio newprio=3D120
|futex sched_switch: prev_comm=futex_requeue_p prev_pid"20 prev_prio=120
Peter suggested to open code the new priority so people using tracehook
could get the deadline data out.
Reported-by: Mansky Christian <man@keba.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: b91473ff6e97 ("sched,tracing: Update trace_sched_pi_setprio()")
Link: http://lkml.kernel.org/r/20180524132647.gg6ziuogczdmjjzu@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The recent conversion of the task state recording to use task_state_index()
broke the sched_switch tracepoint task state output.
task_state_index() returns surprisingly an index (0-7) which is then
printed with __print_flags() applying bitmasks. Not really working and
resulting in weird states like 'prev_state=t' instead of 'prev_state=I'.
Use TASK_REPORT_MAX instead of TASK_STATE_MAX to report preemption. Build a
bitmask from the return value of task_state_index() and store it in
entry->prev_state, which makes __print_flags() work as expected.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: stable@vger.kernel.org
Fixes: efb40f588b43 ("sched/tracing: Fix trace_sched_switch task-state printing")
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1711221304180.1751@nanos
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Steve requested better names for the new task-state helper functions.
So introduce the concept of task-state index for the printing and
rename __get_task_state() to task_state_index() and
__task_state_to_char() to task_index_to_char().
Requested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170929115016.pzlqc7ss3ccystyg@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Currently TASK_PARKED is masqueraded as TASK_INTERRUPTIBLE, give it
its own print state because it will not in fact get woken by regular
wakeups and is a long-term state.
This requires moving TASK_PARKED into the TASK_REPORT mask, and since
that latter needs to be a contiguous bitmask, we need to shuffle the
bits around a bit.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Markus reported that kthreads that idle using TASK_IDLE instead of
TASK_INTERRUPTIBLE are reported in as TASK_UNINTERRUPTIBLE and things
like htop mark those red.
This is undesirable, so add an explicit state for TASK_IDLE.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Convert trace_sched_switch to use the common task-state helpers and
fix the "X" and "Z" order, possibly they ended up in the wrong order
because TASK_REPORT has them in the wrong order too.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Pass the PI donor task, instead of a numerical priority.
Numerical priorities are not sufficient to describe state ever since
SCHED_DEADLINE.
Annotate all sched tracepoints that are currently broken; fixing them
will bork userspace. *hate*.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: xlpang@redhat.com
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170323150216.353599881@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
<linux/sched/numa_balancing.h>
We are going to split <linux/sched/numa_balancing.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/numa_balancing.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
