| Age | Commit message (Collapse) | Author |
|---|
|
Make the afs_cb_call tracepoint display some security parameters to make
debugging easier.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250411095303.2316168-12-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simplify afs_cell record handling to avoid very occasional races that cause
module removal to hang (it waits for all cell records to be removed).
There are two things that particularly contribute to the difficulty:
firstly, the code tries to pass a ref on the cell to the cell's maintenance
work item (which gets awkward if the work item is already queued); and,
secondly, there's an overall cell manager that tries to use just one timer
for the entire cell collection (to avoid having loads of timers). However,
both of these are probably unnecessarily restrictive.
To simplify this, the following changes are made:
(1) The cell record collection manager is removed. Each cell record
manages itself individually.
(2) Each afs_cell is given a second work item (cell->destroyer) that is
queued when its refcount reaches zero. This is not done in the
context of the putting thread as it might be in an inconvenient place
to sleep.
(3) Each afs_cell is given its own timer. The timer is used to expire the
cell record after a period of unuse if not otherwise pinned and can
also be used for other maintenance tasks if necessary (of which there
are currently none as DNS refresh is triggered by filesystem
operations).
(4) The afs_cell manager work item (cell->manager) is no longer given a
ref on the cell when queued; rather, the manager must be deleted.
This does away with the need to deal with the consequences of losing a
race to queue cell->manager. Clean up of extra queuing is deferred to
the destroyer.
(5) The cell destroyer work item makes sure the cell timer is removed and
that the normal cell work is cancelled before farming the actual
destruction off to RCU.
(6) When a network namespace is destroyed or the kafs module is unloaded,
it's now a simple matter of marking the namespace as dead then just
waking up all the cell work items. They will then remove and destroy
themselves once all remaining activity counts and/or a ref counts are
dropped. This makes sure that all server records are dropped first.
(7) The cell record state set is reduced to just four states: SETTING_UP,
ACTIVE, REMOVING and DEAD. The record persists in the active state
even when it's not being used until the time comes to remove it rather
than downgrading it to an inactive state from whence it can be
restored.
This means that the cell still appears in /proc and /afs when not in
use until it switches to the REMOVING state - at which point it is
removed.
Note that the REMOVING state is included so that someone wanting to
resurrect the cell record is forced to wait whilst the cell is torn
down in that state. Once it's in the DEAD state, it has been removed
from net->cells tree and is no longer findable and can be replaced.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20250224234154.2014840-16-dhowells@redhat.com/ # v1
Link: https://lore.kernel.org/r/20250310094206.801057-12-dhowells@redhat.com/ # v4
|
|
The current way that afs_server refs are accounted and cleaned up sometimes
cause rmmod to hang when it is waiting for cell records to be removed. The
problem is that the cell cleanup might occasionally happen before the
server cleanup and then there's nothing that causes the cell to
garbage-collect the remaining servers as they become inactive.
Partially fix this by:
(1) Give each afs_server record its own management timer that rather than
relying on the cell manager's central timer to drive each individual
cell's maintenance work item to garbage collect servers.
This timer is set when afs_unuse_server() reduces a server's activity
count to zero and will schedule the server's destroyer work item upon
firing.
(2) Give each afs_server record its own destroyer work item that removes
the record from the cell's database, shuts down the timer, cancels any
pending work for itself, sends an RPC to the server to cancel
outstanding callbacks.
This change, in combination with the timer, obviates the need to try
and coordinate so closely between the cell record and a bunch of other
server records to try and tear everything down in a coordinated
fashion. With this, the cell record is pinned until the server RCU is
complete and namespace/module removal will wait until all the cell
records are removed.
(3) Now that incoming calls are mapped to servers (and thus cells) using
data attached to an rxrpc_peer, the UUID-to-server mapping tree is
moved from the namespace to the cell (cell->fs_servers). This means
there can no longer be duplicates therein - and that allows the
mapping tree to be simpler as there doesn't need to be a chain of
same-UUID servers that are in different cells.
(4) The lock protecting the UUID mapping tree is switched to an
rw_semaphore on the cell rather than a seqlock on the namespace as
it's now only used during mounting in contexts in which we're allowed
to sleep.
(5) When it comes time for a cell that is being removed to purge its set
of servers, it just needs to iterate over them and wake them up. Once
a server becomes inactive, its destroyer work item will observe the
state of the cell and immediately remove that record.
(6) When a server record is removed, it is marked AFS_SERVER_FL_EXPIRED to
prevent reattempts at removal. The record will be dispatched to RCU
for destruction once its refcount reaches 0.
(7) The AFS_SERVER_FL_UNCREATED/CREATING flags are used to synchronise
simultaneous creation attempts. If one attempt fails, it will abandon
the attempt and allow another to try again.
Note that the record can't just be abandoned when dead as it's bound
into a server list attached to a volume and only subject to
replacement if the server list obtained for the volume from the VLDB
changes.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20250224234154.2014840-15-dhowells@redhat.com/ # v1
Link: https://lore.kernel.org/r/20250310094206.801057-11-dhowells@redhat.com/ # v4
|
|
Make use of the per-peer application data that rxrpc now allows the
application to store on the rxrpc_peer struct to hold a back pointer to the
afs_server record that peer represents an endpoint for.
Then, when a call comes in to the AFS cache manager, this can be used to
map it to the correct server record rather than having to use a
UUID-to-server mapping table and having to do an additional lookup.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20250224234154.2014840-14-dhowells@redhat.com/ # v1
Link: https://lore.kernel.org/r/20250310094206.801057-10-dhowells@redhat.com/ # v4
|
|
Remove the redundant net parameter to afs_unuse_cell() as cell->net can be
used instead.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20250224234154.2014840-12-dhowells@redhat.com/ # v1
Link: https://lore.kernel.org/r/20250310094206.801057-8-dhowells@redhat.com/ # v4
|
|
Pass a note to be added to the afs_cell tracepoint to afs_lookup_cell() so
that different callers can be distinguished.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20250224234154.2014840-11-dhowells@redhat.com/ # v1
Link: https://lore.kernel.org/r/20250310094206.801057-7-dhowells@redhat.com/ # v4
|
|
Improve server refcount/active count tracing to distinguish between simply
getting/putting a ref and using/unusing the server record (which changes
the activity count as well as the refcount). This makes it a bit easier to
work out what's going on.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20250224234154.2014840-10-dhowells@redhat.com/ # v1
Link: https://lore.kernel.org/r/20250310094206.801057-6-dhowells@redhat.com/ # v4
|
|
Improve the tracing of afs_volume objects to include displaying a debug ID
so that different instances of volumes with the same "vid" can be
distinguished.
Also be consistent about displaying the volume's refcount (and not the
cell's).
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20250224234154.2014840-9-dhowells@redhat.com/ # v1
Link: https://lore.kernel.org/r/20250310094206.801057-5-dhowells@redhat.com/ # v4
|
|
Change the AFS dynamic root to do things differently:
(1) Rather than having the creation of cell records create inodes and
dentries for cell mountpoints, create them on demand during lookup.
This simplifies cell management and locking as we no longer have to
create these objects in advance *and* on speculative lookup by the
user for a cell that isn't precreated.
(2) Rather than using the libfs dentry-based readdir (the dentries now no
longer exist until accessed from (1)), have readdir generate the
contents by reading the list of cells. The @cell symlinks get pushed
in positions 2 and 3 if rootcell has been configured.
(3) Make the @cell symlink dentries persist for the life of the superblock
or until reclaimed, but make cell mountpoints disappear immediately if
unused.
It's not perfect as someone doing an "ls -l /afs" may create a whole
bunch of dentries which will be garbage collected immediately. But
any dentry that gets automounted will be pinned by the mount, so it
shouldn't be too bad.
(4) Allocate the inode numbers for the cell mountpoints from an IDR to
prevent duplicates appearing in the event it cycles round. The number
allocated from the IDR is doubled to provide two inode numbers - one
for the normal cell name (RO) and one for the dotted cell name (RW).
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20250224234154.2014840-8-dhowells@redhat.com/ # v1
Link: https://lore.kernel.org/r/20250310094206.801057-4-dhowells@redhat.com/ # v4
|
|
Give an afs_server object a ref on the afs_cell object it points to so that
the cell doesn't get deleted before the server record.
Whilst this is circular (cell -> vol -> server_list -> server -> cell), the
ref only pins the memory, not the lifetime as that's controlled by the
activity counter. When the volume's activity counter reaches 0, it
detaches from the cell and discards its server list; when a cell's activity
counter reaches 0, it discards its root volume. At that point, the
circularity is cut.
Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250218192250.296870-6-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull afs updates from Christian Brauner:
"Dynamic root improvements:
- Create an /afs/.<cell> mountpoint to match the /afs/<cell>
mountpoint when a cell is created
- Add some more checks on cell names proposed by the user to prevent
dodgy symlink bodies from being created. Also prevent rootcell from
being altered once set to simplify the locking
- Change the handling of /afs/@cell from being a dentry name
substitution at lookup time to making it a symlink to the current
cell name and also provide a /afs/.@cell symlink to point to the
dotted cell mountpoint
Fixes:
- Fix the abort code check in the fallback handling for the
YFS.RemoveFile2 RPC call
- Use call->op->server() for oridnary filesystem RPC calls that have
an operation descriptor instead of call->server()"
* tag 'vfs-6.14-rc1.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
afs: Fix the fallback handling for the YFS.RemoveFile2 RPC call
afs: Make /afs/@cell and /afs/.@cell symlinks
afs: Add rootcell checks
afs: Make /afs/.<cell> as well as /afs/<cell> mountpoints
|
|
Make /afs/@cell a symlink in the /afs dynamic root to match what other AFS
clients do rather than doing a substitution in the dentry name. This has
the bonus of being tab-expandable also.
Further, provide a /afs/.@cell symlink to point to the dotted cell share.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20250107183454.608451-4-dhowells@redhat.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a tracepoint for afs_read_receive() to allow potential missed wakeups
to be debugged.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-32-dhowells@redhat.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Initialise a new directory's content when it is created by mkdir locally
rather than downloading the content from the server as we can predict what
it's going to look like.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-29-dhowells@redhat.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
If we manage to begin an async call, but fail to transmit any data on it
due to a signal, we then abort it which causes a race between the
notification of call completion from rxrpc and our attempt to cancel the
notification. The notification will be necessary, however, for async
FetchData to terminate the netfs subrequest.
However, since we get a notification from rxrpc upon completion of a call
(aborted or otherwise), we can just leave it to that.
This leads to calls not getting cleaned up, but appearing in
/proc/net/rxrpc/calls as being aborted with code 6.
Fix this by making the "error_do_abort:" case of afs_make_call() abort the
call and then abandon it to the notification handler.
Fixes: 34fa47612bfe ("afs: Fix race in async call refcounting")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-25-dhowells@redhat.com
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Use netfslib to read symlinks, thereby allowing them to be cached by
fscache and cachefiles.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-23-dhowells@redhat.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-afs@lists.infradead.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In the AFS ecosystem, directories are just a special type of file that is
downloaded and parsed locally. Download is done by the same mechanism as
ordinary files and the data can be cached. There is one important semantic
restriction on directories over files: the client must download the entire
directory in one go because, for example, the server could fabricate the
contents of the blob on the fly with each download and give a different
image each time.
So that we can cache the directory download, switch AFS directory support
over to using the netfslib single-object API, thereby allowing directory
content to be stored in the local cache.
To make this work, the following changes are made:
(1) A directory's contents are now stored in a folio_queue chain attached
to the afs_vnode (inode) struct rather than its associated pagecache,
though multipage folios are still used to hold the data. The folio
queue is discarded when the directory inode is evicted.
This also helps with the phasing out of ITER_XARRAY.
(2) Various directory operations are made to use and unuse the cache
cookie.
(3) The content checking, content dumping and content iteration are now
performed with a standard iov_iter iterator over the contents of the
folio queue.
(4) Iteration and modification must be done with the vnode's validate_lock
held. In conjunction with (1), this means that the iteration can be
done without the need to lock pages or take extra refs on them, unlike
when accessing ->i_pages.
(5) Convert to using netfs_read_single() to read data.
(6) Provide a ->writepages() to call netfs_writeback_single() to save the
data to the cache according to the VM's scheduling whilst holding the
validate_lock read-locked as (4).
(7) Change local directory image editing functions:
(a) Provide a function to get a specific block by number from the
folio_queue as we can no longer use the i_pages xarray to locate
folios by index. This uses a cursor to remember the current
position as we need to iterate through the directory contents.
The block is kmapped before being returned.
(b) Make the function in (a) extend the directory by an extra folio if
we run out of space.
(c) Raise the check of the block free space counter, for those blocks
that have one, higher in the function to eliminate a call to get a
block.
(d) Remove the page unlocking and putting done during the editing
loops. This is no longer necessary as the folio_queue holds the
references and the pages are no longer in the pagecache.
(e) Mark the inode dirty and pin the cache usage till writeback at the
end of a successful edit.
(8) Don't set the large_folios flag on the inode as we do the allocation
ourselves rather than the VM doing it automatically.
(9) Mark the inode as being a single object that isn't uploaded to the
server.
(10) Enable caching on directories.
(11) Only set the upload key for writeback for regular files.
Notes:
(*) We keep the ->release_folio(), ->invalidate_folio() and
->migrate_folio() ops as we set the mapping pointer on the folio.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-22-dhowells@redhat.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-afs@lists.infradead.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add wrappers to set and clear the callback promise and to mark a directory
as invalidated, and add tracepoints to track these events:
(1) afs_cb_promise: Log when a callback promise is set on a vnode.
(2) afs_vnode_invalid: Log when the server's callback promise for a vnode
is no longer valid and we need to refetch the vnode metadata.
(3) afs_dir_invalid: Log when the contents of a directory are marked
invalid and requiring refetching from the server and the cache
invalidating.
and two tracepoints to record data version number management:
(4) afs_set_dv: Log when the DV is recorded on a vnode.
(5) afs_dv_mismatch: Log when the DV recorded on a vnode plus the expected
delta for the operation does not match the DV we got back from the
server.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-18-dhowells@redhat.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When rename moves an AFS subdirectory between parent directories, the
subdir also needs a bit of editing: the ".." entry needs updating to point
to the new parent (though I don't make use of the info) and the DV needs
incrementing by 1 to reflect the change of content. The server also sends
a callback break notification on the subdirectory if we have one, but we
can take care of recovering the promise next time we access the subdir.
This can be triggered by something like:
mount -t afs %example.com:xfstest.test20 /xfstest.test/
mkdir /xfstest.test/{aaa,bbb,aaa/ccc}
touch /xfstest.test/bbb/ccc/d
mv /xfstest.test/{aaa/ccc,bbb/ccc}
touch /xfstest.test/bbb/ccc/e
When the pathwalk for the second touch hits "ccc", kafs spots that the DV
is incorrect and downloads it again (so the fix is not critical).
Fix this, if the rename target is a directory and the old and new
parents are different, by:
(1) Incrementing the DV number of the target locally.
(2) Editing the ".." entry in the target to refer to its new parent's
vnode ID and uniquifier.
Link: https://lore.kernel.org/r/3340431.1729680010@warthog.procyon.org.uk
Fixes: 63a4681ff39c ("afs: Locally edit directory data for mkdir/create/unlink/...")
cc: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull file locking updates from Christian Brauner:
"A few years ago struct file_lock_context was added to allow for
separate lists to track different types of file locks instead of using
a singly-linked list for all of them.
Now leases no longer need to be tracked using struct file_lock.
However, a lot of the infrastructure is identical for leases and locks
so separating them isn't trivial.
This splits a group of fields used by both file locks and leases into
a new struct file_lock_core. The new core struct is embedded in struct
file_lock. Coccinelle was used to convert a lot of the callers to deal
with the move, with the remaining 25% or so converted by hand.
Afterwards several internal functions in fs/locks.c are made to work
with struct file_lock_core. Ultimately this allows to split struct
file_lock into struct file_lock and struct file_lease. The file lease
APIs are then converted to take struct file_lease"
* tag 'vfs-6.9.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (51 commits)
filelock: fix deadlock detection in POSIX locking
filelock: always define for_each_file_lock()
smb: remove redundant check
filelock: don't do security checks on nfsd setlease calls
filelock: split leases out of struct file_lock
filelock: remove temporary compatibility macros
smb/server: adapt to breakup of struct file_lock
smb/client: adapt to breakup of struct file_lock
ocfs2: adapt to breakup of struct file_lock
nfsd: adapt to breakup of struct file_lock
nfs: adapt to breakup of struct file_lock
lockd: adapt to breakup of struct file_lock
fuse: adapt to breakup of struct file_lock
gfs2: adapt to breakup of struct file_lock
dlm: adapt to breakup of struct file_lock
ceph: adapt to breakup of struct file_lock
afs: adapt to breakup of struct file_lock
9p: adapt to breakup of struct file_lock
filelock: convert seqfile handling to use file_lock_core
filelock: convert locks_translate_pid to take file_lock_core
...
|
|
Most of the existing APIs have remained the same, but subsystems that
access file_lock fields directly need to reach into struct
file_lock_core now.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20240131-flsplit-v3-35-c6129007ee8d@kernel.org
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When afs does a lookup, it tries to use FS.InlineBulkStatus to preemptively
look up a bunch of files in the parent directory and cache this locally, on
the basis that we might want to look at them too (for example if someone
does an ls on a directory, they may want want to then stat every file
listed).
FS.InlineBulkStatus can be considered a compound op with the normal abort
code applying to the compound as a whole. Each status fetch within the
compound is then given its own individual abort code - but assuming no
error that prevents the bulk fetch from returning the compound result will
be 0, even if all the constituent status fetches failed.
At the conclusion of afs_do_lookup(), we should use the abort code from the
appropriate status to determine the error to return, if any - but instead
it is assumed that we were successful if the op as a whole succeeded and we
return an incompletely initialised inode, resulting in ENOENT, no matter
the actual reason. In the particular instance reported, a vnode with no
permission granted to be accessed is being given a UAEACCES abort code
which should be reported as EACCES, but is instead being reported as
ENOENT.
Fix this by abandoning the inode (which will be cleaned up with the op) if
file[1] has an abort code indicated and turn that abort code into an error
instead.
Whilst we're at it, add a tracepoint so that the abort codes of the
individual subrequests of FS.InlineBulkStatus can be logged. At the moment
only the container abort code can be 0.
Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept")
Reported-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull netfs updates from Christian Brauner:
"This extends the netfs helper library that network filesystems can use
to replace their own implementations. Both afs and 9p are ported. cifs
is ready as well but the patches are way bigger and will be routed
separately once this is merged. That will remove lots of code as well.
The overal goal is to get high-level I/O and knowledge of the page
cache and ouf of the filesystem drivers. This includes knowledge about
the existence of pages and folios
The pull request converts afs and 9p. This removes about 800 lines of
code from afs and 300 from 9p. For 9p it is now possible to do writes
in larger than a page chunks. Additionally, multipage folio support
can be turned on for 9p. Separate patches exist for cifs removing
another 2000+ lines. I've included detailed information in the
individual pulls I took.
Summary:
- Add NFS-style (and Ceph-style) locking around DIO vs buffered I/O
calls to prevent these from happening at the same time.
- Support for direct and unbuffered I/O.
- Support for write-through caching in the page cache.
- O_*SYNC and RWF_*SYNC writes use write-through rather than writing
to the page cache and then flushing afterwards.
- Support for write-streaming.
- Support for write grouping.
- Skip reads for which the server could only return zeros or EOF.
- The fscache module is now part of the netfs library and the
corresponding maintainer entry is updated.
- Some helpers from the fscache subsystem are renamed to mark them as
belonging to the netfs library.
- Follow-up fixes for the netfs library.
- Follow-up fixes for the 9p conversion"
* tag 'vfs-6.8.netfs' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (50 commits)
netfs: Fix wrong #ifdef hiding wait
cachefiles: Fix signed/unsigned mixup
netfs: Fix the loop that unmarks folios after writing to the cache
netfs: Fix interaction between write-streaming and cachefiles culling
netfs: Count DIO writes
netfs: Mark netfs_unbuffered_write_iter_locked() static
netfs: Fix proc/fs/fscache symlink to point to "netfs" not "../netfs"
netfs: Rearrange netfs_io_subrequest to put request pointer first
9p: Use length of data written to the server in preference to error
9p: Do a couple of cleanups
9p: Fix initialisation of netfs_inode for 9p
cachefiles: Fix __cachefiles_prepare_write()
9p: Use netfslib read/write_iter
afs: Use the netfs write helpers
netfs: Export the netfs_sreq tracepoint
netfs: Optimise away reads above the point at which there can be no data
netfs: Implement a write-through caching option
netfs: Provide a launder_folio implementation
netfs: Provide a writepages implementation
netfs, cachefiles: Pass upper bound length to allow expansion
...
|
|
Add a tracepoint to log calls to afs_make_call(), including the destination
server address.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Fix the fileserver rotation so that it doesn't use RTT as the basis for
deciding which server and address to use as this doesn't necessarily give a
good indication of the best path. Instead, use the configurable preference
list in conjunction with whatever probes have succeeded at the time of
looking.
To this end, make the following changes:
(1) Keep an array of "server states" to track what addresses we've tried
on each server and move the waitqueue entries there that we'll need
for probing.
(2) Each afs_server_state struct is made to pin the corresponding server's
endpoint state rather than the afs_operation struct carrying a pin on
the server we're currently looking at.
(3) Drop the server list preference; we now always rescan the server list.
(4) afs_wait_for_probes() now uses the server state list to guide it in
what it waits for (and to provide the waitqueue entries) and returns
an indication of whether we'd got a response, run out of responsive
addresses or the endpoint state had been superseded and we need to
restart the iteration.
(5) Call afs_get_address_preferences*() occasionally to refresh the
preference values.
(6) When picking a server, scan the addresses of the servers for which we
have as-yet untested communications, looking for the highest priority
one and use that instead of trying all the addresses for a particular
server in ascending-RTT order.
(7) When a Busy or Offline state is seen across all available servers, do
a short sleep.
(8) If we detect that we accessed a future RO volume version whilst it is
undergoing replication, reissue the op against the older version until
at least half of the servers are replicated.
(9) Whilst RO replication is ongoing, increase the frequency of Volume
Location server checks for that volume to every ten minutes instead of
hourly.
Also add a tracepoint to track progress through the rotation algorithm.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Overhaul the third party-induced invalidation handling, making use of the
previously added volume-level event counters (cb_scrub and cb_ro_snapshot)
that are now being parsed out of the VolSync record returned by the
fileserver in many of its replies.
This allows better handling of RO (and Backup) volumes. Since these are
snapshot of a RW volume that are updated atomically simultantanously across
all servers that host them, they only require a single callback promise for
the entire volume. The currently upstream code assumes that RO volumes
operate in the same manner as RW volumes, and that each file has its own
individual callback - which means that it does a status fetch for *every*
file in a RO volume, whether or not the volume got "released" (volume
callback breaks can occur for other reasons too, such as the volumeserver
taking ownership of a volume from a fileserver).
To this end, make the following changes:
(1) Change the meaning of the volume's cb_v_break counter so that it is
now a hint that we need to issue a status fetch to work out the state
of a volume. cb_v_break is incremented by volume break callbacks and
by server initialisation callbacks.
(2) Add a second counter, cb_v_check, to the afs_volume struct such that
if this differs from cb_v_break, we need to do a check. When the
check is complete, cb_v_check is advanced to what cb_v_break was at
the start of the status fetch.
(3) Move the list of mmap'd vnodes to the volume and trigger removal of
PTEs that map to files on a volume break rather than on a server
break.
(4) When a server reinitialisation callback comes in, use the
server-to-volume reverse mapping added in a preceding patch to iterate
over all the volumes using that server and clear the volume callback
promises for that server and the general volume promise as a whole to
trigger reanalysis.
(5) Replace the AFS_VNODE_CB_PROMISED flag with an AFS_NO_CB_PROMISE
(TIME64_MIN) value in the cb_expires_at field, reducing the number of
checks we need to make.
(6) Change afs_check_validity() to quickly see if various event counters
have been incremented or if the vnode or volume callback promise is
due to expire/has expired without making any changes to the state.
That is now left to afs_validate() as this may get more complicated in
future as we may have to examine server records too.
(7) Overhaul afs_validate() so that it does a single status fetch if we
need to check the state of either the vnode or the volume - and do so
under appropriate locking. The function does the following steps:
(A) If the vnode/volume is no longer seen as valid, then we take the
vnode validation lock and, if the volume promise has expired, the
volume check lock also. The latter prevents redundant checks being
made to find out if a new version of the volume got released.
(B) If a previous RPC call found that the volsync changed unexpectedly
or that a RO volume was updated, then we unmap all PTEs pointing to
the file to stop mmap being used for access.
(C) If the vnode is still seen to be of uncertain validity, then we
perform an FS.FetchStatus RPC op to jointly update the volume status
and the vnode status. This assessment is done as part of parsing the
reply:
If the RO volume creation timestamp advances, cb_ro_snapshot is
incremented; if either the creation or update timestamps changes in
an unexpected way, the cb_scrub counter is incremented
If the Data Version returned doesn't match the copy we have
locally, then we ask for the pagecache to be zapped. This takes
care of handling RO update.
(D) If cb_scrub differs between volume and vnode, the vnode's
pagecache is zapped and the vnode's cb_scrub is updated unless the
file is marked as having been deleted.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
A number of fileserver RPC operations return a VolSync record as part of
their reply that gives some information about the state of the volume being
accessed, including:
(1) A volume Creation timestamp. For an RW volume, this is the time at
which the volume was created; if it changes, the RW volume was
presumably restored from a backup and all cached data should be
scrubbed as Data Version numbers could regress on the files in the
volume.
For an RO volume, this is the time it was last snapshotted from the RW
volume. It is expected to advance each time this happens; if it
regresses, cached data should be scrubbed.
(2) A volume Update timestamp (Auristor only). For an RW volume, this is
updated any time any change is made to a volume or its contents. If
it regresses, all cached data must be scrubbed.
For an RO volume, this is a copy of the RW volume's Update timestamp
at the point of snapshotting. It can be used as a version number when
checking to see if a callback on a RO volume was due to a snapshot.
If it regresses, all cached data must be scrubbed.
but this is currently not made use of by the in-kernel afs filesystem.
Make the afs filesystem use this by:
(1) Add an update time field to the afs_volsync struct and use a value of
TIME64_MIN in both that and the creation time to indicate that they
are unset.
(2) Add creation and update time fields to the afs_volume struct and use
this to track the two timestamps.
(3) Add a volsync_lock mutex to the afs_volume struct to control
modification access for when we detect a change in these values.
(3) Add a 'pre-op volsync' struct to the afs_operation struct to record
the state of the volume tracking before the op.
(4) Add a new counter, cb_scrub, to the afs_volume struct to count events
that require all data to be scrubbed. A copy is placed in the
afs_vnode struct (inode) and if they no longer match, a scrub takes
place.
(5) When the result of an operation is being parsed, parse the VolSync
data too, if it is provided. Note that the two timestamps are handled
separately, since they don't work in quite the same way.
- If the afs_volume tracking is unset, just set it and do nothing
else.
- If the result timestamps are the same as the ones in afs_volume, do
nothing.
- If the timestamps regress, increment cb_scrub if not already done
so.
- If the creation timestamp on a RW volume changes, increment cb_scrub
if not already done so.
- If the creation timestamp on a RO volume advances, update the server
list and see if the current server has been excluded, if so reissue
the op. Once over half of the replication sites have been updated,
increment cb_ro_snapshot to indicate updates may be required and
switch over to excluding unupdated replication sites.
- If the creation timestamp on a Backup volume advances, just
increment cb_ro_snapshot to trigger updates.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Apply server breaks to mmap'd files that are being used from that server
from the call processor work function rather than punting it off to a
workqueue. The work item, afs_server_init_callback(), then bumps each
individual inode off to its own work item introducing a potentially lengthy
delay. This reduces that delay at the cost of extending the amount of time
we delay replying to the CB.InitCallBack3 notification RPC from the server.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Keep a record of the current fileserver endpoint state, including the probe
state, and replace it when a new probe is started rather than just
squelching the old state and overwriting it. Clearance of the old state
can cause a race if there's another thread also currently trying to
communicate with that server.
It appears that this race might be the culprit for some occasions where
kafs complains about invalid data in the RPC reply because the rotation
algorithm fell all the way through without actually issuing an RPC call and
the error return got filled in from the probe state (which has a zero error
recorded). Whatever happens to be in the caller's reply buffer is then
taken as the response.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
When probing all the addresses for a volume location server, dispatch them
in order of descending priority to try and get back highest priority one
first.
Also add a tracepoint to show the transmission and completion of the
probes.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
When probing all the addresses for a fileserver, dispatch them in order of
descending priority to try and get back highest priority one first.
Also add a tracepoint to show the transmission and completion of the
probes.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Make afs use the netfs write helpers.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Fold the afs_addr_cursor struct into the afs_operation struct and the
afs_vl_cursor struct and fold its operations into their callers also.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Add a tracepoint to track the lifetime of the afs_addr_list struct.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
AFS currently uses folio->private to store the range of bytes within a
folio that have been modified - the idea being that if we have, say, a 2MiB
folio and someone writes a single byte, we only have to write back that
single page and not the whole 2MiB folio - thereby saving on network
bandwidth.
Remove this, at least for now, and accept the extra network load (which
doesn't matter in the common case of writing a whole file at a time from
beginning to end).
This makes folio->private available for netfslib to use.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Automatically generate trace tag enums from the symbol -> string mapping
tables rather than having the enums as well, thereby reducing duplicated
data.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
|
|
checkpatch objects to whitespace before ')', so remove most of it from the
afs trace header.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
|
|
Reference-putting functions should not access the object being put after
decrementing the refcount unless they reduce the refcount to zero.
Fix a couple of instances of this in afs by copying the information to be
logged by tracepoint to local variables before doing the decrement.
[Fixed a bit in afs_put_server() that I'd missed but Marc caught]
Fixes: 341f741f04be ("afs: Refcount the afs_call struct")
Fixes: 452181936931 ("afs: Trace afs_server usage")
Fixes: 977e5f8ed0ab ("afs: Split the usage count on struct afs_server")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/165911278430.3745403.16526310736054780645.stgit@warthog.procyon.org.uk/ # v1
|
|
Use refcount_t rather than atomic_t in afs to make use of the count
checking facilities provided.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/165911277768.3745403.423349776836296452.stgit@warthog.procyon.org.uk/ # v1
|
|
Convert the netfs helper library to use folios throughout, convert the 9p
and afs filesystems to use folios in their file I/O paths and convert the
ceph filesystem to use just enough folios to compile.
With these changes, afs passes -g quick xfstests.
Changes
=======
ver #5:
- Got rid of folio_end{io,_read,_write}() and inlined the stuff it does
instead (Willy decided he didn't want this after all).
ver #4:
- Fixed a bug in afs_redirty_page() whereby it didn't set the next page
index in the loop and returned too early.
- Simplified a check in v9fs_vfs_write_folio_locked()[1].
- Undid a change to afs_symlink_readpage()[1].
- Used offset_in_folio() in afs_write_end()[1].
- Changed from using page_endio() to folio_end{io,_read,_write}()[1].
ver #2:
- Add 9p foliation.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dominique Martinet <asmadeus@codewreck.org>
Tested-by: kafs-testing@auristor.com
cc: Matthew Wilcox (Oracle) <willy@infradead.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: v9fs-developer@lists.sourceforge.net
cc: linux-afs@lists.infradead.org
cc: ceph-devel@vger.kernel.org
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/YYKa3bfQZxK5/wDN@casper.infradead.org/ [1]
Link: https://lore.kernel.org/r/2408234.1628687271@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/162877311459.3085614.10601478228012245108.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/162981153551.1901565.3124454657133703341.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/163005745264.2472992.9852048135392188995.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163584187452.4023316.500389675405550116.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/163649328026.309189.1124218109373941936.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/163657852454.834781.9265101983152100556.stgit@warthog.procyon.org.uk/ # v5
|
|
Try to avoid taking the RCU read lock when checking the validity of a
vnode's callback state. The only thing it's needed for is to pin the
parent volume's server list whilst we search it to find the record of the
server we're currently using to see if it has been reinitialised (ie. it
sent us a CB.InitCallBackState* RPC).
Do this by the following means:
(1) Keep an additional per-cell counter (fs_s_break) that's incremented
each time any of the fileservers in the cell reinitialises.
Since the new counter can be accessed without RCU from the vnode, we
can check that first - and only if it differs, get the RCU read lock
and check the volume's server list.
(2) Replace afs_get_s_break_rcu() with afs_check_server_good() which now
indicates whether the callback promise is still expected to be present
on the server. This does the checks as described in (1).
(3) Restructure afs_check_validity() to take account of the change in (2).
We can also get rid of the valid variable and just use the need_clear
variable with the addition of the afs_cb_break_no_promise reason.
(4) afs_check_validity() probably shouldn't be altering vnode->cb_v_break
and vnode->cb_s_break when it doesn't have cb_lock exclusively locked.
Move the change to vnode->cb_v_break to __afs_break_callback().
Delegate the change to vnode->cb_s_break to afs_select_fileserver()
and set vnode->cb_fs_s_break there also.
(5) afs_validate() no longer needs to get the RCU read lock around its
call to afs_check_validity() - and can skip the call entirely if we
don't have a promise.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/163111669583.283156.1397603105683094563.stgit@warthog.procyon.org.uk/
|
|
To quote Alexey[1]:
I was adding custom tracepoint to the kernel, grabbed full F34 kernel
.config, disabled modules and booted whole shebang as VM kernel.
Then did
perf record -a -e ...
It crashed:
general protection fault, probably for non-canonical address 0x435f5346592e4243: 0000 [#1] SMP PTI
CPU: 1 PID: 842 Comm: cat Not tainted 5.12.6+ #26
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
RIP: 0010:t_show+0x22/0xd0
Then reproducer was narrowed to
# cat /sys/kernel/tracing/printk_formats
Original F34 kernel with modules didn't crash.
So I started to disable options and after disabling AFS everything
started working again.
The root cause is that AFS was placing char arrays content into a
section full of _pointers_ to strings with predictable consequences.
Non canonical address 435f5346592e4243 is "CB.YFS_" which came from
CM_NAME macro.
Steps to reproduce:
CONFIG_AFS=y
CONFIG_TRACING=y
# cat /sys/kernel/tracing/printk_formats
Fix this by the following means:
(1) Add enum->string translation tables in the event header with the AFS
and YFS cache/callback manager operations listed by RPC operation ID.
(2) Modify the afs_cb_call tracepoint to print the string from the
translation table rather than using the string at the afs_call name
pointer.
(3) Switch translation table depending on the service we're being accessed
as (AFS or YFS) in the tracepoint print clause. Will this cause
problems to userspace utilities?
Note that the symbolic representation of the YFS service ID isn't
available to this header, so I've put it in as a number. I'm not sure
if this is the best way to do this.
(4) Remove the name wrangling (CM_NAME) macro and put the names directly
into the afs_call_type structs in cmservice.c.
Fixes: 8e8d7f13b6d5a9 ("afs: Add some tracepoints")
Reported-by: Alexey Dobriyan (SK hynix) <adobriyan@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: Andrew Morton <akpm@linux-foundation.org>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/YLAXfvZ+rObEOdc%2F@localhost.localdomain/ [1]
Link: https://lore.kernel.org/r/643721.1623754699@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/162430903582.2896199.6098150063997983353.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/162609463957.3133237.15916579353149746363.stgit@warthog.procyon.org.uk/ # v1 (repost)
Link: https://lore.kernel.org/r/162610726860.3408253.445207609466288531.stgit@warthog.procyon.org.uk/ # v2
|
|
Use a single ITER_XARRAY iterator to describe the portion of a file to be
transmitted to the server rather than generating a series of small
ITER_BVEC iterators on the fly. This will make it easier to implement AIO
in afs.
In theory we could maybe use one giant ITER_BVEC, but that means
potentially allocating a huge array of bio_vec structs (max 256 per page)
when in fact the pagecache already has a structure listing all the relevant
pages (radix_tree/xarray) that can be walked over.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/153685395197.14766.16289516750731233933.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/158861251312.340223.17924900795425422532.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/159465828607.1377938.6903132788463419368.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/160588535018.3465195.14509994354240338307.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118152415.1232039.6452879415814850025.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161048194.2537118.13763612220937637316.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340411602.1303470.4661108879482218408.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539555629.286939.5241869986617154517.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653811456.2770958.7017388543246759245.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789095005.6155.6789055030327407928.stgit@warthog.procyon.org.uk/ # v6
|
|
Pass a pointer to the page being accessed into the dirty region helpers so
that the size of the page can be determined in case it's a transparent huge
page.
This also required the page to be passed into the afs_page_dirty trace
point - so there's no need to specifically pass in the index or private
data as these can be retrieved directly from the page struct.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/160588527183.3465195.16107942526481976308.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118144921.1232039.11377711180492625929.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161040747.2537118.11435394902674511430.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340404553.1303470.11414163641767769882.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539548385.286939.8864598314493255313.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653804285.2770958.3497360004849598038.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789087043.6155.16922142208140170528.stgit@warthog.procyon.org.uk/ # v6
|
|
The number of dirent records used by an AFS directory entry should be
calculated using the assumption that there is a 16-byte name field in the
first block, rather than a 20-byte name field (which is actually the case).
This miscalculation is historic and effectively standard, so we have to use
it.
The calculation we need to use is:
1 + (((strlen(name) + 1) + 15) >> 5)
where we are adding one to the strlen() result to account for the NUL
termination.
Fix this by the following means:
(1) Create an inline function to do the calculation for a given name
length.
(2) Use the function to calculate the number of records used for a dirent
in afs_dir_iterate_block().
Use this to move the over-end check out of the loop since it only
needs to be done once.
Further use this to only go through the loop for the 2nd+ records
composing an entry. The only test there now is for if the record is
allocated - and we already checked the first block at the top of the
outer loop.
(3) Add a max name length check in afs_dir_iterate_block().
(4) Make afs_edit_dir_add() and afs_edit_dir_remove() use the function
from (1) to calculate the number of blocks rather than doing it
incorrectly themselves.
Fixes: 63a4681ff39c ("afs: Locally edit directory data for mkdir/create/unlink/...")
Fixes: ^1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
|
|
Fix afs_invalidatepage() to adjust the dirty region recorded in
page->private when truncating a page. If the dirty region is entirely
removed, then the private data is cleared and the page dirty state is
cleared.
Without this, if the page is truncated and then expanded again by truncate,
zeros from the expanded, but no-longer dirty region may get written back to
the server if the page gets laundered due to a conflicting 3rd-party write.
It mustn't, however, shorten the dirty region of the page if that page is
still mmapped and has been marked dirty by afs_page_mkwrite(), so a flag is
stored in page->private to record this.
Fixes: 4343d00872e1 ("afs: Get rid of the afs_writeback record")
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
The afs filesystem uses page->private to store the dirty range within a
page such that in the event of a conflicting 3rd-party write to the server,
we write back just the bits that got changed locally.
However, there are a couple of problems with this:
(1) I need a bit to note if the page might be mapped so that partial
invalidation doesn't shrink the range.
(2) There aren't necessarily sufficient bits to store the entire range of
data altered (say it's a 32-bit system with 64KiB pages or transparent
huge pages are in use).
So wrap the accesses in inline functions so that future commits can change
how this works.
Also move them out of the tracing header into the in-directory header.
There's not really any need for them to be in the tracing header.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Don't give an assertion failure on unpurgeable afs_server records - which
kills the thread - but rather emit a trace line when we are purging a
record (which only happens during network namespace removal or rmmod) and
print a notice of the problem.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Add a tracepoint to log the cell refcount and active user count and pass in
a reason code through various functions that manipulate these counters.
Additionally, a helper function, afs_see_cell(), is provided to log
interesting places that deal with a cell without actually doing any
accounting directly.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Add a tracepoint to track the lifetime of the afs_volume struct.
Signed-off-by: David Howells <dhowells@redhat.com>
|
