summaryrefslogtreecommitdiff
path: root/include/net/mac80211.h
AgeCommit message (Collapse)Author
12 dayswifi: mac80211: don't require cipher and keylen in gtk rekeyMiri Korenblit
ieee80211_add_gtk_rekey receives a keyconf as an argument, and the cipher and keylen are taken from there to the new allocated key. But in rekey, both the cipher and the keylen should be the same as of the old key, so let ieee80211_add_gtk_rekey find those, so drivers won't have to fill it in. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250721214922.3c5c023bfae9.Ie6594ae2b4b6d5b3d536e642b349046ebfce7a5d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 dayswifi: mac80211: remove ieee80211_remove_keyMiri Korenblit
It is no longer used, remove it. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250721091956.e964ceacd85c.Idecab8ef161fa58e000b3969bc936399284b79f0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-18wifi: mac80211: support initialising an S1G short beaconing BSSLachlan Hodges
Introduce the ability to parse the short beacon data and long beacon period. The long beacon period represents the number of beacon intervals between each long beacon transmission. Additionally, as a BSS cannot change its configuration such that short beaconing is dynamically disabled/enabled without tearing down the interface - we ensure we have an existing short beacon before performing the update. Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com> Link: https://patch.msgid.link/20250717074205.312577-3-lachlan.hodges@morsemicro.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-09wifi: mac80211: don't complete management TX on SAE commitJohannes Berg
When SAE commit is sent and received in response, there's no ordering for the SAE confirm messages. As such, don't call drivers to stop listening on the channel when the confirm message is still expected. This fixes an issue if the local confirm is transmitted later than the AP's confirm, for iwlwifi (and possibly mt76) the AP's confirm would then get lost since the device isn't on the channel at the time the AP transmit the confirm. For iwlwifi at least, this also improves the overall timing of the authentication handshake (by about 15ms according to the report), likely since the session protection won't be aborted and rescheduled. Note that even before this, mgd_complete_tx() wasn't always called for each call to mgd_prepare_tx() (e.g. in the case of WEP key shared authentication), and the current drivers that have the complete callback don't seem to mind. Document this as well though. Reported-by: Jan Hendrik Farr <kernel@jfarr.cc> Closes: https://lore.kernel.org/all/aB30Ea2kRG24LINR@archlinux/ Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250609213232.12691580e140.I3f1d3127acabcd58348a110ab11044213cf147d3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-09wifi: mac80211: remove DISALLOW_PUNCTURING_5GHZ codeJohannes Berg
Since iwlwifi was the only driver using this and no longer does, we can remove all this code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250609213231.4dff5fb8890f.Ie531f912b252a0042c18c0734db50c3afe1adfb5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-09wifi: mac80211: avoid weird state in error pathMiri Korenblit
If we get to the error path of ieee80211_prep_connection, for example because of a FW issue, then ieee80211_vif_set_links is called with 0. But the call to drv_change_vif_links from ieee80211_vif_update_links will probably fail as well, for the same reason. In this case, the valid_links and active_links bitmaps will be reverted to the value of the failing connection. Then, in the next connection, due to the logic of ieee80211_set_vif_links_bitmaps, valid_links will be set to the ID of the new connection assoc link, but the active_links will remain with the ID of the old connection's assoc link. If those IDs are different, we get into a weird state of valid_links and active_links being different. One of the consequences of this state is to call drv_change_vif_links with new_links as 0, since the & operation between the bitmaps will be 0. Since a removal of a link should always succeed, ignore the return value of drv_change_vif_links if it was called to only remove links, which is the case for the ieee80211_prep_connection's error path. That way, the bitmaps will not be reverted to have the value from the failing connection and will have 0, so the next connection will have a good state. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250609213231.ba2011fb435f.Id87ff6dab5e1cf757b54094ac2d714c656165059@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-24wifi: mac80211: handle station association response with S1GLachlan Hodges
Add support for updating the stations S1G capabilities when an S1G association occurs. Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com> Link: https://patch.msgid.link/20250617080610.756048-3-lachlan.hodges@morsemicro.com [remove unused S1G_CAP3_MAX_MPDU_LEN_3895/_7791] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-24wifi: cfg80211/mac80211: Add support to get radio indexRoopni Devanathan
Currently, per-radio attributes are set on per-phy basis, i.e., all the radios present in a wiphy will take attributes values sent from user. But each radio in a wiphy can get different values from userspace based on its requirement. To extend support to set per-radio attributes, add support to get radio index from userspace. Add an NL attribute - NL80211_ATTR_WIPHY_RADIO_INDEX, to get user specified radio index for which attributes should be changed. Pass this to individual drivers, so that the drivers can use this radio index to change per-radio attributes when necessary. Currently, per-radio attributes identified are: NL80211_ATTR_WIPHY_TX_POWER_LEVEL NL80211_ATTR_WIPHY_ANTENNA_TX NL80211_ATTR_WIPHY_ANTENNA_RX NL80211_ATTR_WIPHY_RETRY_SHORT NL80211_ATTR_WIPHY_RETRY_LONG NL80211_ATTR_WIPHY_FRAG_THRESHOLD NL80211_ATTR_WIPHY_RTS_THRESHOLD NL80211_ATTR_WIPHY_COVERAGE_CLASS NL80211_ATTR_TXQ_LIMIT NL80211_ATTR_TXQ_MEMORY_LIMIT NL80211_ATTR_TXQ_QUANTUM By default, the radio index is set to -1. This means the attribute should be treated as a global configuration. If the user has not specified any index, then the radio index passed to individual drivers would be -1. This would indicate that the attribute applies to all radios in that wiphy. Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250615082312.619639-2-quic_rdevanat@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-24wifi: mac80211: add link_sta_statistics ops to fill link station statisticsSarika Sharma
Currently, link station statistics for MLO are filled by mac80211. But there are some statistics that kept by mac80211 might not be accurate, so let the driver pre-fill the link statistics. The driver can fill the values (indicating which field is filled, by setting the filled bitmapin in link_station structure). Statistics that driver don't fill are filled by mac80211. Hence, add link_sta_statistics callback to fill link station statistics for MLO in sta_set_link_sinfo() by drivers. Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com> Link: https://patch.msgid.link/20250528054420.3050133-11-quic_sarishar@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-24wifi: mac80211: add support towards MLO handling of station statisticsSarika Sharma
Currently, in supporting API's to fill sinfo structure from sta structure, is mapped to fill the fields from sta->deflink. However, for multi-link (ML) station, sinfo structure should be filled from corresponding link_id. Therefore, add link_id as an additional argument in supporting API's for filling sinfo structure correctly. Link_id is set to -1 for non-ML station and corresponding link_id for ML stations. In supporting API's for filling sinfo structure, check for link_id, if link_id < 0, fill the sinfo structure from sta->deflink, otherwise fill from sta->link[link_id]. Current, changes are done at the deflink level i.e, pass -1 as link_id. Actual link_id will be added in subsequent patches to support station statistics for MLO. Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com> Link: https://patch.msgid.link/20250528054420.3050133-2-quic_sarishar@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-05-09wifi: mac80211: Update MCS15 support in link_confMohan Kumar G
As per IEEE 802.11be-2024 - 9.4.2.321, EHT operation element contains MCS15 Disable subfield as the sixth bit, which is set when MCS15 support is not enabled. Get MCS15 support from EHT operation params and add it in link_conf so that driver can use this value to know if EHT-MCS 15 reception is enabled. Co-developed-by: Dhanavandhana Kannan <quic_dhanavan1@quicinc.com> Signed-off-by: Dhanavandhana Kannan <quic_dhanavan1@quicinc.com> Signed-off-by: Mohan Kumar G <quic_mkumarg@quicinc.com> Link: https://patch.msgid.link/20250505152836.3266829-1-quic_mkumarg@quicinc.com [remove pointless !! for bool assignment] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-23wifi: mac80211: restructure tx profile retrieval for MLO MBSSIDRameshkumar Sundaram
For MBSSID, each vif (struct ieee80211_vif) stores another vif pointer for the transmitting profile of MBSSID set. This won't suffice for MLO as there may be multiple links, each of which can be part of different MBSSID sets. Hence the information needs to be stored per-link. Additionally, the transmitted profile itself may be part of an MLD hence storing vif will not suffice either. Fix MLO by storing an instance of struct ieee80211_bss_conf for each link. Modify following operations to reflect the above structure updates: - channel switch completion - BSS color change completion - Removing nontransmitted links in ieee80211_stop_mbssid() - drivers retrieving the transmitted link for beacon templates. Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com> Co-developed-by: Muna Sinada <muna.sinada@oss.qualcomm.com> Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com> Co-developed-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com> Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com> Link: https://patch.msgid.link/20250408184501.3715887-3-aloka.dixit@oss.qualcomm.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-23wifi: mac80211: update ML STA with EML capabilitiesRamasamy Kaliappan
When an AP and Non-AP MLD operates in EMLSR mode, EML capabilities advertised during Association contains information such as EMLSR transition delay, padding delay and transition timeout values. Save the EML capabilities information that is received during station addition and capabilities update in ieee80211_sta so that drivers can use it for triggering EMLSR operation. Signed-off-by: Ramasamy Kaliappan <quic_rkaliapp@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Link: https://patch.msgid.link/20250327051320.3253783-3-quic_ramess@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-23Revert "mac80211: Dynamically set CoDel parameters per station"Toke Høiland-Jørgensen
This reverts commit 484a54c2e597dbc4ace79c1687022282905afba0. The CoDel parameter change essentially disables CoDel on slow stations, with some questionable assumptions, as Dave pointed out in [0]. Quoting from there: But here are my pithy comments as to why this part of mac80211 is so wrong... static void sta_update_codel_params(struct sta_info *sta, u32 thr) { - if (thr && thr < STA_SLOW_THRESHOLD * sta->local->num_sta) { 1) sta->local->num_sta is the number of associated, rather than active, stations. "Active" stations in the last 50ms or so, might have been a better thing to use, but as most people have far more than that associated, we end up with really lousy codel parameters, all the time. Mistake numero uno! 2) The STA_SLOW_THRESHOLD was completely arbitrary in 2016. - sta->cparams.target = MS2TIME(50); This, by itself, was probably not too bad. 30ms might have been better, at the time, when we were battling powersave etc, but 20ms was enough, really, to cover most scenarios, even where we had low rate 2Ghz multicast to cope with. Even then, codel has a hard time finding any sane drop rate at all, with a target this high. - sta->cparams.interval = MS2TIME(300); But this was horrible, a total mistake, that is leading to codel being completely ineffective in almost any scenario on clients or APS. 100ms, even 80ms, here, would be vastly better than this insanity. I'm seeing 5+seconds of delay accumulated in a bunch of otherwise happily fq-ing APs.... 100ms of observed jitter during a flow is enough. Certainly (in 2016) there were interactions with powersave that I did not understand, and still don't, but if you are transmitting in the first place, powersave shouldn't be a problemmmm..... - sta->cparams.ecn = false; At the time we were pretty nervous about ecn, I'm kind of sanguine about it now, and reliably indicating ecn seems better than turning it off for any reason. [...] In production, on p2p wireless, I've had 8ms and 80ms for target and interval for years now, and it works great. I think Dave's arguments above are basically sound on the face of it, and various experimentation with tighter CoDel parameters in the OpenWrt community have show promising results[1]. So I don't think there's any reason to keep this parameter fiddling; hence this revert. [0] https://lore.kernel.org/linux-wireless/CAA93jw6NJ2cmLmMauz0xAgC2MGbBq6n0ZiZzAdkK0u4b+O2yXg@mail.gmail.com/ [1] https://forum.openwrt.org/t/reducing-multiplexing-latencies-still-further-in-wifi/133605/130 Suggested-By: Dave Taht <dave.taht@gmail.com> In-memory-of: Dave Taht <dave.taht@gmail.com> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://patch.msgid.link/20250403183930.197716-1-toke@toke.dk Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-26wifi: mac80211: add ieee80211_iter_chan_contexts_mtxMiri Korenblit
Add a chanctx iterator that can be called from a wiphy-locked context. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250212082137.d85eef3024de.Icda0616416c5fd4b2cbf892bdab2476f26e644ec@changeid [fix kernel-doc] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: mac80211: set ieee80211_prep_tx_info::link_id upon Auth RxEmmanuel Grumbach
This will be used by the low level driver. Note that link_id will be 0 in case of a non-MLO authentication. Also fix a call-site of mgd_prepare_tx() where the link_id was not populated. Update the documentation to reflect the current state ieee80211_prep_tx_info::link_id is also available in mgd_complete_tx(). Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250205110958.6a590f189ce5.I1fc5c0da26b143f5b07191eb592f01f7083d55ae@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: mac80211: add strict mode disabling workaroundsJohannes Berg
Add a strict mode where we disable certain workarounds and have additional checks such as, for now, that VHT capabilities from association response match those from beacon/probe response. We can extend the checks in the future. Make it an opt-in setting by the driver so it can be set there in some driver-specific way, for example. Also allow setting this one hw flag through the hwflags debugfs, by writing a new strict=0 or strict=1 value. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250205110958.5cecb0469479.I4a69617dc60ba0d6308416ffbc3102cfd08ba068@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-11wifi: mac80211: Add support for EPCS configurationIlan Peer
Add support for configuring EPCS state: - When EPCS is enabled, send an EPCS enable request action frame to the AP. When the AP replies with EPCS enable response, enable EPCS by applying the QoS parameters provided by the AP. Do so for all the valid MLD links. Once EPCS is enabled, support processing of unsolicited EPCS enable response frames. - When EPCS is disabled, send an EPCS teardown request to the AP and apply the QoS parameters as obtained from the last received beacons. Do so for all the valid links. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250205110958.7a90afd7e140.I3f602d65f5c1fd849d6c70b12307dda33aa91ccb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: mac80211: set key link ID to the deflink oneBenjamin Berg
When in non-MLO mode, the key ID was set to -1 even for keys that are not pairwise. Change the link ID to be the link ID of the deflink in this case so that drivers do not need to special cases for this. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250102161730.0c066f084677.I4a5c288465e75119edb6a0df90dddf6f30d14a02@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: mac80211: clarify key idx documententaionMiri Korenblit
ieee80211_key_conf::keyidx s in range 0-7, ano not 0-3. Make this clear in the documentation. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250101070249.4e414710fba7.Ib739c40dd5aa6ed148c3151220eb38d8a9e238de@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: mac80211: add some support for RX OMI power savingJohannes Berg
In order to save power, it can be desirable to change the RX operating mode using OMI to reduce the bandwidth. As the handshake must be done in the HTC+ field, it cannot be done by mac80211 directly, so expose functions to the driver to request and finalize the necessary updates. Note that RX OMI really only changes what the peer (AP) will transmit to us, but in order to use it to actually save some power (by reducing the listen bandwidth) we also update rate scaling and then the channel context's mindef accordingly. The updates are split into two in order to sequence them correctly, when reducing bandwidth first reduce the rate scaling and thus TX, then send OMI, then reduce the listen bandwidth (chandef); when increasing bandwidth this is the other way around. This also requires tracking in different variables which part is applicable already. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250101070249.2c1a1934bd73.I4e90fd503504e37f9eac5bdae62e3f07e7071275@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: mac80211: change disassoc sequence a bitMiri Korenblit
Currently, the sequence goes like this (among others): 1. flush all stations (including the AP ones) -> this will tell the drivers to remove the stations 2. notify the driver the vif is not associated. Which means that in between 1 and 2, the state is that the vif is associated, but there is no AP station, which makes no sense, and may be problematic for some drivers (for example iwlwifi) Change the sequence to: 1. flush the TDLS stations 2. move the AP station to IEEE80211_STA_NONE 3. notify the driver about the vif being unassociated 4. flush the AP station In order to not break other drivers, add a vif flag to indicate whether the driver wants to new sequence or not. If the flag is not set, then things will be done in the old sequence. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20241224192322.996ad1be6cb3.I7815d33415aa1d65c0120b54be7a15a45388f807@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-12-19Merge tag 'wireless-next-2024-12-19' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.14 Multi-Link Operation implementation continues, both in stack and in drivers. Otherwise it has been relatively quiet. Major changes: cfg80211/mac80211 - define wiphy guard - get TX power per link - EHT 320 MHz channel support for mesh ath11k - QCA6698AQ support ath9k - RX inactivity detection rtl8xxxu - add more USB device IDs rtw88 - add more USB device IDs - enable USB RX aggregation and USB 3 to improve performance rtw89 - PowerSave flow for Multi-Link Operation * tag 'wireless-next-2024-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (121 commits) wifi: wlcore: sysfs: constify 'struct bin_attribute' wifi: brcmfmac: clarify unmodifiable headroom log message wifi: brcmfmac: add missing header include for brcmf_dbg wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy() wifi: qtnfmac: fix spelling error in core.h wifi: rtw89: phy: add dummy C2H event handler for report of TAS power wifi: rtw89: 8851b: rfk: remove unnecessary assignment of return value of _dpk_dgain_read() wifi: rtw89: 8852c: rfk: refine target channel calculation in _rx_dck_channel_calc() wifi: rtlwifi: pci: wait for firmware loading before releasing memory wifi: rtlwifi: fix memory leaks and invalid access at probe error path wifi: rtlwifi: destroy workqueue at rtl_deinit_core wifi: rtlwifi: remove unused check_buddy_priv wifi: rtw89: 8922a: update format of RFK pre-notify H2C command v2 wifi: rtw89: regd: update regulatory map to R68-R51 wifi: rtw89: 8852c: disable ER SU when 4x HE-LTF and 0.8 GI capability differ wifi: rtw89: disable firmware training HE GI and LTF wifi: rtw89: ps: update data for firmware and settings for hardware before/after PS wifi: rtw89: ps: refactor channel info to firmware before entering PS wifi: rtw89: ps: refactor PS flow to support MLO wifi: mwifiex: decrease timeout waiting for host sleep from 10s to 5s ... ==================== Link: https://patch.msgid.link/20241219185709.774EDC4CECE@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-04wifi: mac80211: get tx power per linkRameshkumar Sundaram
ML interfaces can have multiple affiliated links to it and hence there is a need to report tx power of specified link rather deflink. Add changes to report tx power of requested link from mac80211, also pass link id as an argument in get_tx_power op so that supported drivers can use it to report link's tx power. Co-developed-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Link: https://patch.msgid.link/20241125083217.216095-3-quic_ramess@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-12-03wifi: mac80211: fix vif addr when switching from monitor to stationFelix Fietkau
Since adding support for opting out of virtual monitor support, a zero vif addr was used to indicate passive vs active monitor to the driver. This would break the vif->addr when changing the netdev mac address before switching the interface from monitor to sta mode. Fix the regression by adding a separate flag to indicate whether vif->addr is valid. Reported-by: syzbot+9ea265d998de25ac6a46@syzkaller.appspotmail.com Fixes: 9d40f7e32774 ("wifi: mac80211: add flag to opt out of virtual monitor support") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://patch.msgid.link/20241115115850.37449-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-12-03wifi: mac80211: fix a queue stall in certain cases of CSAEmmanuel Grumbach
If we got an unprotected action frame with CSA and then we heard the beacon with the CSA IE, we'll block the queues with the CSA reason twice. Since this reason is refcounted, we won't wake up the queues since we wake them up only once and the ref count will never reach 0. This led to blocked queues that prevented any activity (even disconnection wouldn't reset the queue state and the only way to recover would be to reload the kernel module. Fix this by not refcounting the CSA reason. It becomes now pointless to maintain the csa_blocked_queues state. Remove it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Fixes: 414e090bc41d ("wifi: mac80211: restrict public action ECSA frame handling") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219447 Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241119173108.5ea90828c2cc.I4f89e58572fb71ae48e47a81e74595cac410fbac@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-11-07wifi: mac80211: fix description of ieee80211_set_active_links() for new sequenceZong-Zhe Yang
The sequence of calls has changed, but the description is inconsistent. So, fix the description. Fixes: 188a1bf89432 ("wifi: mac80211: re-order assigning channel in activate links") Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Link: https://patch.msgid.link/20241101082143.11138-1-kevin_yang@realtek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-23wifi: mac80211: add flag to opt out of virtual monitor supportFelix Fietkau
This is useful for multi-radio devices that are capable of monitoring on multiple channels simultanenously. When this flag is set, each monitor interface is passed to the driver individually and can have a configured channel. The vif mac address for non-active monitor interfaces is cleared, in order to allow the driver to tell them apart from active ones. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://patch.msgid.link/3c55505ee0cf0a5f141fbcb30d1e8be8d9f40373.1728462320.git-series.nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-23wifi: mac80211: remove status->ampdu_delimiter_crcFelix Fietkau
This was never used by any driver, so remove it to free up some space. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://patch.msgid.link/e6fee6eed49b105261830db1c74f13841fb9616c.1728462320.git-series.nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-23wifi: mac80211: expose ieee80211_chan_width_to_rx_bw() to driversJohannes Berg
Drivers might need to also do this calculation, no point in them duplicating the code. Since it's so simple, just make it an inline. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241007144851.af003cb4a088.I8b5d29504b726caae24af6013c65b3daebe842a2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-23wifi: mac80211: call rate_control_rate_update() for link STAJohannes Berg
In order to update the right link information, call the update rate_control_rate_update() with the right link_sta, and then pass that through to the driver's sta_rc_update() method. The software rate control still doesn't support it, but that'll be skipped by not having a rate control ref. Since it now operates on a link sta, rename the driver method. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241007144851.5851b6b5fd41.Ibdf50d96afa4b761dd9b9dfd54a1147e77a75329@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-23wifi: mac80211: make bss_param_ch_cnt available for the low level driverEmmanuel Grumbach
Drivers may need to track this. Make it available for them, and maintain the value when beacons are received. When link X receives a beacon, iterate the RNR elements and update all the links with their respective data. Track the link id that updated the data so that each link can know whether the update came from its own beacon or from another link. In case, the update came from the link's own beacon, always update the updater link id. The purpose is to let the low level driver know if a link is losing its beacons. If link X is losing its beacons, it can still track the bss_param_ch_cnt and know where the update came from. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241007144851.e2d8d1a722ad.I04b883daba2cd48e5730659eb62ca1614c899cbb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-23wifi: mac80211: rename IEEE80211_CHANCTX_CHANGE_MIN_WIDTHMiri Korenblit
The name is misleading, this actually indicates that ieee80211_chanctx_conf::min_def was updated. Rename it to IEEE80211_CHANCTX_CHANGE_MIN_DEF. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241007144851.726b5f12ae0c.I3bd9e594c9d2735183ec049a4c7224bd0a9599c9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-23wifi: mac80211: Add support to indicate that a new interface is to be addedIlan Peer
Add support to indicate to the driver that an interface is about to be added so that the driver could prepare its resources early if it needs so. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241007144851.e0e8563e1c30.Ifccc96a46a347eb15752caefc9f4eff31f75ed47@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-02move asm/unaligned.h to linux/unaligned.hAl Viro
asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
2024-09-06wifi: mac80211: handle ieee80211_radar_detected() for MLOAditya Kumar Singh
Currently DFS works under assumption there could be only one channel context in the hardware. Hence, drivers just calls the function ieee80211_radar_detected() passing the hardware structure. However, with MLO, this obviously will not work since number of channel contexts will be more than one and hence drivers would need to pass the channel information as well on which the radar is detected. Also, when radar is detected in one of the links, other link's CAC should not be cancelled. Hence, in order to support DFS with MLO, do the following changes - * Add channel context conf pointer as an argument to the function ieee80211_radar_detected(). During MLO, drivers would have to pass on which channel context conf radar is detected. Otherwise, drivers could just pass NULL. * ieee80211_radar_detected() will iterate over all channel contexts present and * if channel context conf is passed, only mark that as radar detected * if NULL is passed, then mark all channel contexts as radar detected * Then as usual, schedule the radar detected work. * In the worker, go over all the contexts again and for all such context which is marked with radar detected, cancel the ongoing CAC by calling ieee80211_dfs_cac_cancel() and then notify cfg80211 via cfg80211_radar_event(). * To cancel the CAC, pass the channel context as well where radar is detected to ieee80211_dfs_cac_cancel(). This ensures that CAC is canceled only on the links using the provided context, leaving other links unaffected. This would also help in scenarios where there is split phy 5 GHz radio, which is capable of DFS channels in both lower and upper band. In this case, simultaneous radars can be detected. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20240906064426.2101315-9-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: mac80211: export ieee80211_purge_tx_queue() for driversPing-Ke Shih
Drivers need to purge TX SKB when stopping. Using skb_queue_purge() can't report TX status to mac80211, causing ieee80211_free_ack_frame() warns "Have pending ack frames!". Export ieee80211_purge_tx_queue() for drivers to not have to reimplement it. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240822014255.10211-1-pkshih@realtek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: mac80211: Add non-atomic station iteratorRory Little
Drivers may at times want to iterate their stations with a function which requires some non-atomic operations. ieee80211_iterate_stations_mtx() introduces an API to iterate stations while holding that wiphy's mutex. This allows the iterating function to do non-atomic operations safely. Signed-off-by: Rory Little <rory@candelatech.com> Link: https://patch.msgid.link/20240806004024.2014080-2-rory@candelatech.com [unify internal list iteration functions] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: mac80211: don't use rate mask for offchannel TX eitherPing-Ke Shih
Like the commit ab9177d83c04 ("wifi: mac80211: don't use rate mask for scanning"), ignore incorrect settings to avoid no supported rate warning reported by syzbot. The syzbot did bisect and found cause is commit 9df66d5b9f45 ("cfg80211: fix default HE tx bitrate mask in 2G band"), which however corrects bitmask of HE MCS and recognizes correctly settings of empty legacy rate plus HE MCS rate instead of returning -EINVAL. As suggestions [1], follow the change of SCAN TX to consider this case of offchannel TX as well. [1] https://lore.kernel.org/linux-wireless/6ab2dc9c3afe753ca6fdcdd1421e7a1f47e87b84.camel@sipsolutions.net/T/#m2ac2a6d2be06a37c9c47a3d8a44b4f647ed4f024 Reported-by: syzbot+8dd98a9e98ee28dc484a@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-wireless/000000000000fdef8706191a3f7b@google.com/ Fixes: 9df66d5b9f45 ("cfg80211: fix default HE tx bitrate mask in 2G band") Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240729074816.20323-1-pkshih@realtek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: mac80211: refactor block ack management codeDmitry Antipov
Introduce 'ieee80211_mgmt_ba()' to avoid code duplication between 'ieee80211_send_addba_resp()', 'ieee80211_send_addba_request()', and 'ieee80211_send_delba()', ensure that all related addresses are '__aligned(2)', and prefer convenient 'ether_addr_copy()' over generic 'memcpy()'. No functional changes expected. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Link: https://patch.msgid.link/20240725090925.6022-1-dmantipov@yandex.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-07-11Merge tag 'wireless-next-2024-07-11' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.11 Most likely the last "new features" pull request for v6.11 with changes both in stack and in drivers. The big thing is the multiple radios for wiphy feature which makes it possible to better advertise radio capabilities to user space. mt76 enabled MLO and iwlwifi re-enabled MLO, ath12k and rtw89 Wi-Fi 6 devices got WoWLAN support. Major changes: cfg80211/mac80211 * remove DEAUTH_NEED_MGD_TX_PREP flag * multiple radios per wiphy support mac80211_hwsim * multi-radio wiphy support ath12k * DebugFS support for datapath statistics * WCN7850: support for WoW (Wake on WLAN) * WCN7850: device-tree bindings ath11k * QCA6390: device-tree bindings iwlwifi * mvm: re-enable Multi-Link Operation (MLO) * aggregation (A-MSDU) optimisations rtw89 * preparation for RTL8852BE-VT support * WoWLAN support for WiFi 6 chips * 36-bit PCI DMA support mt76 * mt7925 Multi-Link Operation (MLO) support * tag 'wireless-next-2024-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (204 commits) wifi: mac80211: fix AP chandef capturing in CSA wifi: iwlwifi: correctly reference TSO page information wifi: mt76: mt792x: fix scheduler interference in drv own process wifi: mt76: mt7925: enabling MLO when the firmware supports it wifi: mt76: mt7925: remove the unused mt7925_mcu_set_chan_info wifi: mt76: mt7925: update mt7925_mac_link_bss_add for MLO wifi: mt76: mt7925: update mt7925_mcu_bss_basic_tlv for MLO wifi: mt76: mt7925: update mt7925_mcu_set_timing for MLO wifi: mt76: mt7925: update mt7925_mcu_sta_phy_tlv for MLO wifi: mt76: mt7925: update mt7925_mcu_sta_rate_ctrl_tlv for MLO wifi: mt76: mt7925: add mt7925_mcu_sta_eht_mld_tlv for MLO wifi: mt76: mt7925: update mt7925_mcu_sta_update for MLO wifi: mt76: mt7925: update mt7925_mcu_add_bss_info for MLO wifi: mt76: mt7925: update mt7925_mcu_bss_mld_tlv for MLO wifi: mt76: mt7925: update mt7925_mcu_sta_mld_tlv for MLO wifi: mt76: mt7925: add mt7925_[assign,unassign]_vif_chanctx wifi: mt76: add def_wcid to struct mt76_wcid wifi: mt76: mt7925: report link information in rx status wifi: mt76: mt7925: update rate index according to link id wifi: mt76: mt7925: add link handling in the mt7925_ipv6_addr_change ... ==================== Link: https://patch.msgid.link/20240711102353.0C849C116B1@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-09wifi: mac80211: add radio index to ieee80211_chanctx_confFelix Fietkau
Will be used to explicitly assign a channel context to a wiphy radio. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://patch.msgid.link/59f76f57d935f155099276be22badfa671d5bfd9.1720514221.git-series.nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-07-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/phy/aquantia/aquantia.h 219343755eae ("net: phy: aquantia: add missing include guards") 61578f679378 ("net: phy: aquantia: add support for PHY LEDs") drivers/net/ethernet/wangxun/libwx/wx_hw.c bd07a9817846 ("net: txgbe: remove separate irq request for MSI and INTx") b501d261a5b3 ("net: txgbe: add FDIR ATR support") https://lore.kernel.org/all/20240703112936.483c1975@canb.auug.org.au/ include/linux/mlx5/mlx5_ifc.h 048a403648fc ("net/mlx5: IFC updates for changing max EQs") 99be56171fa9 ("net/mlx5e: SHAMPO, Re-enable HW-GRO") https://lore.kernel.org/all/20240701133951.6926b2e3@canb.auug.org.au/ Adjacent changes: drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c 4130c67cd123 ("wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference") 3f3126515fbe ("wifi: iwlwifi: mvm: add mvm-specific guard") include/net/mac80211.h 816c6bec09ed ("wifi: mac80211: fix BSS_CHANGED_UNSOL_BCAST_PROBE_RESP") 5a009b42e041 ("wifi: mac80211: track changes in AP's TPE") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-28wifi: mac80211: fix BSS_CHANGED_UNSOL_BCAST_PROBE_RESPJohannes Berg
Fix the definition of BSS_CHANGED_UNSOL_BCAST_PROBE_RESP so that not all higher bits get set, 1<<31 is a signed variable, so when we do u64 changed = BSS_CHANGED_UNSOL_BCAST_PROBE_RESP; we get sign expansion, so the value is 0xffff'ffff'8000'0000 and that's clearly not desired. Use BIT_ULL() to make it unsigned as well as the right type for the change flags. Fixes: 178e9d6adc43 ("wifi: mac80211: fix unsolicited broadcast probe config") Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240627104257.06174d291db2.Iba0d642916eb78a61f8ab2cc5ca9280783d9c1db@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-28wifi: mac80211: remove DEAUTH_NEED_MGD_TX_PREPJohannes Berg
This flag is annoying because it puts a lot of logic into mac80211 that could just as well be in the driver (only iwlmvm uses it) and the implementation is also broken for MLO. Remove the flag in favour of calling drv_mgd_prepare_tx() without any conditions even for the deauth-while-assoc case. The drivers that implement it can take the appropriate actions, which for the only user of DEAUTH_NEED_MGD_TX_PREP (iwlmvm) is a bit more tricky than the implementation in mac80211 is anyway, and all others have no need and can just exit if info->was_assoc is set. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240627132527.94924bcc9c9e.I328a219e45f2e2724cd52e75bb9feee3bf21a463@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: mac80211: inform the low level if drv_stop() is a suspendEmmanuel Grumbach
This will allow the low level driver to take different actions for different flows. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240618192529.739036208b6e.Ie18a2fe8e02bf2717549d39420b350cfdaf3d317@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-23wifi: mac80211: Add EHT UL MU-MIMO flag in ieee80211_bss_confPradeep Kumar Chitrapu
Add flag for Full Bandwidth UL MU-MIMO for EHT. This is utilized to pass EHT MU-MIMO configurations from user space to driver in AP mode. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Link: https://msgid.link/20240515181327.12855-2-quic_pradeepc@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-23wifi: mac80211: track changes in AP's TPEJohannes Berg
If the TPE (transmit power envelope) is changed, detect and report that to the driver. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506214536.103dda923f45.I990877e409ab8eade9ed7c172272e0cae57256cf@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-23wifi: mac80211: pass parsed TPE data to driversJohannes Berg
Instead of passing the full TPE elements, in all their glory and mixed up data formats for HE backward compatibility, parse them fully into the right values, and pass that to the drivers. Also introduce proper validation already in mac80211, so that drivers don't need to do it, and parse the EHT portions. The code now passes the values in the right order according to the channel used by an interface, which could also be a subset of the data advertised by the AP, if we couldn't connect with the full bandwidth (for whatever reason.) Also add kunit tests for the more complicated bits of it. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240506214536.2aa839969b60.I265b28209e0b29772b2f125f7f83de44a4da877b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-03wifi: mac80211: handle color change per linkAditya Kumar Singh
In order to support color change with MLO, handle the link ID now passed from cfg80211, adjust the code to do everything per link and call the notifications to cfg80211 correctly. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240422053412.2024075-4-quic_adisi@quicinc.com Link: https://msgid.link/20240422053412.2024075-5-quic_adisi@quicinc.com Link: https://msgid.link/20240422053412.2024075-6-quic_adisi@quicinc.com Link: https://msgid.link/20240422053412.2024075-7-quic_adisi@quicinc.com [squash, move API call updates to this patch] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 04:04:51 +0000