| Age | Commit message (Collapse) | Author |
|---|
|
Use separate link type id for unicast and broadcast ISO connections.
These connection types are handled with separate HCI commands, socket
API is different, and hci_conn has union fields that are different in
the two cases, so they shall not be mixed up.
Currently in most places it is attempted to distinguish ucast by
bacmp(&c->dst, BDADDR_ANY) but it is wrong as dst is set for bcast sink
hci_conn in iso_conn_ready(). Additionally checking sync_handle might be
OK, but depends on details of bcast conn configuration flow.
To avoid complicating it, use separate link types.
Fixes: f764a6c2c1e4 ("Bluetooth: ISO: Add broadcast support")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Although commit 75ddcd5ad40e ("Bluetooth: btusb: Configure altsetting
for HCI_USER_CHANNEL") has enabled the HCI_USER_CHANNEL user to send out
SCO data through USB Bluetooth chips, it's observed that with the patch
HFP is flaky on most of the existing USB Bluetooth controllers: Intel
chips sometimes send out no packet for Transparent codec; MTK chips may
generate SCO data with a wrong handle for CVSD codec; RTK could split
the data with a wrong packet size for Transparent codec; ... etc.
To address the issue above one needs to reset the altsetting back to
zero when there is no active SCO connection, which is the same as the
BlueZ behavior, and another benefit is the bus doesn't need to reserve
bandwidth when no SCO connection.
This patch adds the infrastructure that allow the user space program to
talk to Bluetooth drivers directly:
- Define the new packet type HCI_DRV_PKT which is specifically used for
communication between the user space program and the Bluetooth drviers
- hci_send_frame intercepts the packets and invokes drivers' HCI Drv
callbacks (so far only defined for btusb)
- 2 kinds of events to user space: Command Status and Command Complete,
the former simply returns the status while the later may contain
additional response data.
Cc: chromeos-bluetooth-upstreaming@chromium.org
Fixes: b16b327edb4d ("Bluetooth: btusb: add sysfs attribute to control USB alt setting")
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This fixes the regression introduced by 50c1241e6a8a ("Bluetooth: l2cap:
Check encryption key size on incoming connection") introduced a check for
l2cap_check_enc_key_size which checks for hcon->enc_key_size which may
not be initialized if HCI_OP_READ_ENC_KEY_SIZE is still pending.
If the key encryption size is known, due previously reading it using
HCI_OP_READ_ENC_KEY_SIZE, then store it as part of link_key/smp_ltk
structures so the next time the encryption is changed their values are
used as conn->enc_key_size thus avoiding the racing against
HCI_OP_READ_ENC_KEY_SIZE.
Now that the enc_size is stored as part of key the information the code
then attempts to check that there is no downgrade of security if
HCI_OP_READ_ENC_KEY_SIZE returns a value smaller than what has been
previously stored.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220061
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220063
Fixes: 522e9ed157e3 ("Bluetooth: l2cap: Check encryption key size on incoming connection")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
BIG Create Sync requires the command to just generates a status so this
makes use of __hci_cmd_sync_status_sk to wait for
HCI_EVT_LE_BIG_SYNC_ESTABLISHED, also because of this chance it is not
longer necessary to use a custom method to serialize the process of
creating the BIG sync since the cmd_work_sync itself ensures only one
command would be pending which now awaits for
HCI_EVT_LE_BIG_SYNC_ESTABLISHED before proceeding to next connection.
Fixes: 42ecf1947135 ("Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pending")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Broadcast Receiver requires creating PA sync but the command just
generates a status so this makes use of __hci_cmd_sync_status_sk to wait
for HCI_EV_LE_PA_SYNC_ESTABLISHED, also because of this chance it is not
longer necessary to use a custom method to serialize the process of
creating the PA sync since the cmd_work_sync itself ensures only one
command would be pending which now awaits for
HCI_EV_LE_PA_SYNC_ESTABLISHED before proceeding to next connection.
Fixes: 4a5e0ba68676 ("Bluetooth: ISO: Do not emit LE PA Create Sync if previous is pending")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Support enabling TX timestamping for some skbs, and track them until
packet completion. Generate software SCM_TSTAMP_COMPLETION when getting
completion report from hardware.
Generate software SCM_TSTAMP_SND before sending to driver. Sending from
driver requires changes in the driver API, and drivers mostly are going
to send the skb immediately.
Make the default situation with no COMPLETION TX timestamping more
efficient by only counting packets in the queue when there is nothing to
track. When there is something to track, we need to make clones, since
the driver may modify sent skbs.
The tx_q queue length is bounded by the hdev flow control, which will
not send new packets before it has got completion reports for old ones.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This enables buffer flow control for SCO/eSCO
(see: Bluetooth Core 6.0 spec: 6.22. Synchronous Flow Control Enable),
recently this has caused the following problem and is actually a nice
addition for the likes of Socket TX complete:
< HCI Command: Read Buffer Size (0x04|0x0005) plen 0
> HCI Event: Command Complete (0x0e) plen 11
Read Buffer Size (0x04|0x0005) ncmd 1
Status: Success (0x00)
ACL MTU: 1021 ACL max packet: 5
SCO MTU: 240 SCO max packet: 8
...
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
> HCI Event: Hardware Error (0x10) plen 1
Code: 0x0a
To fix the code will now attempt to enable buffer flow control when
HCI_QUIRK_SYNC_FLOWCTL_SUPPORTED is set by the driver:
< HCI Command: Write Sync Fl.. (0x03|0x002f) plen 1
Flow control: Enabled (0x01)
> HCI Event: Command Complete (0x0e) plen 4
Write Sync Flow Control Enable (0x03|0x002f) ncmd 1
Status: Success (0x00)
On success then HCI_SCO_FLOWCTL would be set which indicates sco_cnt
shall be used for flow contro.
Fixes: 7fedd3bb6b77 ("Bluetooth: Prioritize SCO traffic")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Pauli Virtanen <pav@iki.fi>
|
|
Some fake controllers cannot be initialized because they return a smaller
report than expected for READ_VOICE_SETTING.
Signed-off-by: Pedro Nishiyama <nishiyama.pedro@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
mgmt_start_discovery_complete() and mgmt_stop_discovery_complete() last
uses were removed in 2022 by
commit ec2904c259c5 ("Bluetooth: Remove dead code from hci_request.c")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This reverts commit 4d94f05558271654670d18c26c912da0c1c15549 which has
problems (see [1]) and is no longer needed since 581dd2dc168f
("Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating")
has reworked the code where the original bug has been found.
[1] Link: https://lore.kernel.org/linux-bluetooth/877c55ci1r.wl-tiwai@suse.de/T/#t
Fixes: 4d94f0555827 ("Bluetooth: hci_core: Fix sleeping function called from invalid context")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The hdev->reset is never used now and the hdev->cmd_timeout actually
does reset. This patch changes the call path from
hdev->cmd_timeout -> vendor_cmd_timeout -> btusb_reset -> hdev->reset
, to
hdev->reset -> vendor_reset -> btusb_reset
Which makes it clear when we export the hdev->reset to a wider usage
e.g. allowing reset from sysfs.
This patch doesn't introduce any behavior change.
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
hci_bdaddr_list_del_with_flags() was added in 2020's
commit 8baaa4038edb ("Bluetooth: Add bdaddr_list_with_flags for classic
whitelist")
but has remained unused.
hci_remove_ext_adv_instance() was added in 2020's
commit eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS
connections")
but has remained unused.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This marks LL Privacy as stable by removing its experimental UUID and
move its functionality to Device Flag (HCI_CONN_FLAG_ADDRESS_RESOLUTION)
which can be set by MGMT Device Set Flags so userspace retain control of
the feature.
Link: https://github.com/bluez/bluez/issues/1028
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This reworks hci_cb_list to not use mutex hci_cb_list_lock to avoid bugs
like the bellow:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:585
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 5070, name: kworker/u9:2
preempt_count: 0, expected: 0
RCU nest depth: 1, expected: 0
4 locks held by kworker/u9:2/5070:
#0: ffff888015be3948 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3229 [inline]
#0: ffff888015be3948 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_scheduled_works+0x8e0/0x1770 kernel/workqueue.c:3335
#1: ffffc90003b6fd00 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3230 [inline]
#1: ffffc90003b6fd00 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_scheduled_works+0x91b/0x1770 kernel/workqueue.c:3335
#2: ffff8880665d0078 (&hdev->lock){+.+.}-{3:3}, at: hci_le_create_big_complete_evt+0xcf/0xae0 net/bluetooth/hci_event.c:6914
#3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:298 [inline]
#3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:750 [inline]
#3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: hci_le_create_big_complete_evt+0xdb/0xae0 net/bluetooth/hci_event.c:6915
CPU: 0 PID: 5070 Comm: kworker/u9:2 Not tainted 6.8.0-syzkaller-08073-g480e035fc4c7 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Workqueue: hci0 hci_rx_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
__might_resched+0x5d4/0x780 kernel/sched/core.c:10187
__mutex_lock_common kernel/locking/mutex.c:585 [inline]
__mutex_lock+0xc1/0xd70 kernel/locking/mutex.c:752
hci_connect_cfm include/net/bluetooth/hci_core.h:2004 [inline]
hci_le_create_big_complete_evt+0x3d9/0xae0 net/bluetooth/hci_event.c:6939
hci_event_func net/bluetooth/hci_event.c:7514 [inline]
hci_event_packet+0xa53/0x1540 net/bluetooth/hci_event.c:7569
hci_rx_work+0x3e8/0xca0 net/bluetooth/hci_core.c:4171
process_one_work kernel/workqueue.c:3254 [inline]
process_scheduled_works+0xa00/0x1770 kernel/workqueue.c:3335
worker_thread+0x86d/0xd70 kernel/workqueue.c:3416
kthread+0x2f0/0x390 kernel/kthread.c:388
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243
</TASK>
Reported-by: syzbot+2fb0835e0c9cefc34614@syzkaller.appspotmail.com
Tested-by: syzbot+2fb0835e0c9cefc34614@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2fb0835e0c9cefc34614
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Currently, hci_conn_hash_lookup_big only checks for BIS master connections,
by filtering out connections with the destination address set. This commit
updates this function to also consider BIS slave connections, since it is
also used for a Broadcast Receiver to set an available BIG handle before
issuing the LE BIG Create Sync command.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The Bluetooth Core spec does not allow a LE BIG Create sync command to be
sent to Controller if another one is pending (Vol 4, Part E, page 2586).
In order to avoid this issue, the HCI_CONN_CREATE_BIG_SYNC was added
to mark that the LE BIG Create Sync command has been sent for a hcon.
Once the BIG Sync Established event is received, the hcon flag is
erased and the next pending hcon is handled.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The Bluetooth Core spec does not allow a LE PA Create sync command to be
sent to Controller if another one is pending (Vol 4, Part E, page 2493).
In order to avoid this issue, the HCI_CONN_CREATE_PA_SYNC was added
to mark that the LE PA Create Sync command has been sent for a hcon.
Once the PA Sync Established event is received, the hcon flag is
erased and the next pending hcon is handled.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This adds quirks for broken extended create connection,
and write auth payload timeout.
Signed-off-by: Danil Pylaev <danstiv404@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
If HCI_CONN_MGMT_CONNECTED has been set then the event shall be
HCI_CONN_MGMT_DISCONNECTED.
Fixes: b644ba336997 ("Bluetooth: Update device_connected and device_found events to latest API")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This reverts commit 59b047bc98084f8af2c41483e4d68a5adf2fa7f7 which
breaks compatibility with commands like:
bluetoothd[46328]: @ MGMT Command: Load.. (0x0013) plen 74 {0x0001} [hci0]
Keys: 2
BR/EDR Address: C0:DC:DA:A5:E5:47 (Samsung Electronics Co.,Ltd)
Key type: Authenticated key from P-256 (0x03)
Central: 0x00
Encryption size: 16
Diversifier[2]: 0000
Randomizer[8]: 0000000000000000
Key[16]: 6ed96089bd9765be2f2c971b0b95f624
LE Address: D7:2A:DE:1E:73:A2 (Static)
Key type: Unauthenticated key from P-256 (0x02)
Central: 0x00
Encryption size: 16
Diversifier[2]: 0000
Randomizer[8]: 0000000000000000
Key[16]: 87dd2546ededda380ffcdc0a8faa4597
@ MGMT Event: Command Status (0x0002) plen 3 {0x0001} [hci0]
Load Long Term Keys (0x0013)
Status: Invalid Parameters (0x0d)
Cc: stable@vger.kernel.org
Link: https://github.com/bluez/bluez/issues/875
Fixes: 59b047bc9808 ("Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This inverts the LE State quirk so by default we assume the controllers
would report valid states rather than invalid which is how quirks
normally behave, also this would result in HCI command failing it the LE
States are really broken thus exposing the controllers that are really
broken in this respect.
Link: https://github.com/bluez/bluez/issues/584
Fixes: 220915857e29 ("Bluetooth: Adding driver and quirk defs for multi-role LE")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Remove unused and set but otherwise unused 'discovery_old_state'
and 'sco_last_tx' members of 'struct hci_dev'. The first one is
a leftover after commit 182ee45da083 ("Bluetooth: hci_sync: Rework
hci_suspend_notifier"); the second one is originated from ancient
2.4.19 and I was unable to find any actual use since that.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
After commit 78db544b5d27 ("Bluetooth: hci_core: Remove le_restart_scan
work"), 'scan_start' and 'scan_duration' of 'struct discovery_state'
are still initialized but actually unused. So remove the aforementioned
fields and adjust 'hci_discovery_filter_clear()' and 'le_scan_disable()'
accordingly. Compile tested only.
Fixes: 78db544b5d27 ("Bluetooth: hci_core: Remove le_restart_scan work")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When HCI raw sockets are opened, the Bluetooth kernel module doesn't
track CIS/BIS connections. User-space applications have to identify
ISO data by maintaining connection information and look up the mapping
for each ACL data packet received. Besides, btsnoop log captured in
kernel couldn't tell ISO data from ACL data in this case.
To avoid additional lookups, this patch introduces vendor-specific
packet classification for Intel BT controllers to distinguish
ISO data packets from ACL data packets.
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This removes the bogus check for max > hcon->le_conn_max_interval since
the later is just the initial maximum conn interval not the maximum the
stack could support which is really 3200=4000ms.
In order to pass GAP/CONN/CPUP/BV-05-C one shall probably enter values
of the following fields in IXIT that would cause hci_check_conn_params
to fail:
TSPX_conn_update_int_min
TSPX_conn_update_int_max
TSPX_conn_update_peripheral_latency
TSPX_conn_update_supervision_timeout
Link: https://github.com/bluez/bluez/issues/847
Fixes: e4b019515f95 ("Bluetooth: Enforce validation on max value of connection interval")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
If hdev->le_num_of_adv_sets is set to 1 it means that only handle 0x00
can be used, but since the MGMT interface instances start from 1
(instance 0 means all instances in case of MGMT_OP_REMOVE_ADVERTISING)
the code needs to map the instance to handle otherwise users will not be
able to advertise as instance 1 would attempt to use handle 0x01.
Fixes: 1d0fac2c38ed ("Bluetooth: Use controller sets when available")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Since BT_HS has been remove HCI_AMP controllers no longer has any use so
remove it along with the capability of creating AMP controllers.
Since we no longer need to differentiate between AMP and Primary
controllers, as only HCI_PRIMARY is left, this also remove
hdev->dev_type altogether.
Fixes: e7b02296fb40 ("Bluetooth: Remove BT_HS")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
l2cap_le_flowctl_init() can cause both div-by-zero and an integer
overflow since hdev->le_mtu may not fall in the valid range.
Move MTU from hci_dev to hci_conn to validate MTU and stop the connection
process earlier if MTU is invalid.
Also, add a missing validation in read_buffer_size() and make it return
an error value if the validation fails.
Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a
kzalloc failure and invalid MTU value.
divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: hci0 hci_rx_work
RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547
Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c
89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d
b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42
RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246
RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000
RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f
RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa
R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084
R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000
FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline]
l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline]
l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline]
l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809
l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506
hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline]
hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176
process_one_work kernel/workqueue.c:3254 [inline]
process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335
worker_thread+0x926/0xe70 kernel/workqueue.c:3416
kthread+0x2e3/0x380 kernel/kthread.c:388
ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
Fixes: 6ed58ec520ad ("Bluetooth: Use LE buffers for LE traffic")
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
In case of a Broadcast Source that has PA enabled but no active BIG,
a Broadcast Sink needs to establish PA sync and parse BASE from PA
reports.
This commit moves the allocation of a PA sync hcon from the BIGInfo
advertising report event to the PA sync established event. After the
first complete PA report, the hcon is notified to the ISO layer. A
child socket is allocated and enqueued in the parent's accept queue.
BIGInfo reports also need to be processed, to extract the encryption
field and inform userspace. After the first BIGInfo report is received,
the PA sync hcon is notified again to the ISO layer. Since a socket will
be found this time, the socket state will transition to BT_CONNECTED and
the userspace will be woken up using sk_state_change.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This adds proper definitions for scan interval and window and then make
use of them instead their values.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The code shall always check if HCI_QUIRK_BROKEN_READ_ENC_KEY_SIZE has
been set before attempting to use HCI_OP_READ_ENC_KEY_SIZE.
Fixes: c569242cd492 ("Bluetooth: hci_event: set the conn encrypted before conn establishes")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The extended advertising reports do report the PHYs so this store then
in hci_conn so it can be later used in hci_le_ext_create_conn_sync to
narrow the PHYs to be scanned since the controller will also perform a
scan having a smaller set of PHYs shall reduce the time it takes to
find and connect peers.
Fixes: 288c90224eec ("Bluetooth: Enable all supported LE PHY by default")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
In a few cases the stack may generate commands as responses to events
which would happen to overwrite the sent_cmd, so this attempts to store
the request in req_skb so even if sent_cmd is replaced with a new
command the pending request will remain in stored in req_skb.
Fixes: 6a98e3836fa2 ("Bluetooth: Add helper for serialized HCI command execution")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This adds support to reassemble PA data for a Broadcast Sink
listening socket. This is needed in case the BASE is received
fragmented in multiple PA reports.
PA data is first reassembled inside the hcon, before the BASE
is extracted and stored inside the socket. The length of the
le_per_adv_data hcon array has been raised to 1650, to accommodate
the maximum PA data length that can come fragmented, according to
spec.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This creates a hcon instance at bis listen, before the PA sync
procedure is started.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
If connection is still queued/pending in the cmd_sync queue it means no
command has been generated and it should be safe to just dequeue the
callback when it is being aborted.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This aligns the use socket sk_timeo as conn_timeout when initiating a
connection and then use it when scheduling the resulting HCI command,
that way the command is actually aborted synchronously thus not
blocking commands generated by hci_abort_conn_sync to inform the
controller the connection is to be aborted.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
With the last commit we moved to using the hci_sync queue for "Create
Connection" requests, removing the need for retrying the paging after
finished/failed "Create Connection" requests and after the end of
inquiries.
hci_conn_check_pending() was used to trigger this retry, we can remove it
now.
Note that we can also remove the special handling for COMMAND_DISALLOWED
errors in the completion handler of "Create Connection", because "Create
Connection" requests are now always serialized.
This is somewhat reverting commit 4c67bc74f016 ("[Bluetooth] Support
concurrent connect requests").
With this, the BT_CONNECT2 state of ACL hci_conn objects should now be
back to meaning only one thing: That we received a "Connection Request"
from another device (see hci_conn_request_evt), but the response to that
is going to be deferred.
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This reverts 19f8def031bfa50c579149b200bfeeb919727b27
"Bluetooth: Fix auth_complete_evt for legacy units" which seems to be
working around a bug on a broken controller rather then any limitation
imposed by the Bluetooth spec, in fact if there ws not possible to
re-auth the command shall fail not succeed.
Fixes: 19f8def031bf ("Bluetooth: Fix auth_complete_evt for legacy units")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This removes le_restart_scan work and instead just disables controller
duplicate filtering when discovery result_filtering is enabled and
HCI_QUIRK_STRICT_DUPLICATE_FILTER is set.
Link: https://github.com/bluez/bluez/issues/573
Link: https://github.com/bluez/bluez/issues/572
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
For ISO Broadcast, all BISes from a BIG have the same lifespan - they
cannot be created or terminated independently from each other.
This links together all BIS hcons that are part of the same BIG, so all
hcons are kept alive as long as the BIG is active.
If multiple BIS sockets are opened for a BIG handle, and only part of
them are closed at some point, the associated hcons will be marked as
open. If new sockets will later be opened for the same BIG, they will
be reassociated with the open BIS hcons.
All BIS hcons will be cleaned up and the BIG will be terminated when
the last BIS socket is closed from userspace.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
If two Bluetooth devices both support BR/EDR and BLE, and also
support Secure Connections, then they only need to pair once.
The LTK generated during the LE pairing process may be converted
into a BR/EDR link key for BR/EDR transport, and conversely, a
link key generated during the BR/EDR SSP pairing process can be
converted into an LTK for LE transport. Hence, the link type of
the link key and LTK is not fixed, they can be either an LE LINK
or an ACL LINK.
Currently, in the mgmt_new_irk/ltk/crsk/link_key functions, the
link type is fixed, which could lead to incorrect address types
being reported to the application layer. Therefore, it is necessary
to add link_type/addr_type to the smp_irk/ltk/crsk and link_key,
to ensure the generation of the correct address type.
SMP over BREDR:
Before Fix:
> ACL Data RX: Handle 11 flags 0x02 dlen 12
BR/EDR SMP: Identity Address Information (0x09) len 7
Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
Random address: 00:00:00:00:00:00 (Non-Resolvable)
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated key from P-256 (0x03)
After Fix:
> ACL Data RX: Handle 11 flags 0x02 dlen 12
BR/EDR SMP: Identity Address Information (0x09) len 7
Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
Random address: 00:00:00:00:00:00 (Non-Resolvable)
BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated key from P-256 (0x03)
SMP over LE:
Before Fix:
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
Random address: 5F:5C:07:37:47:D5 (Resolvable)
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated key from P-256 (0x03)
@ MGMT Event: New Link Key (0x0009) plen 26
BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated Combination key from P-256 (0x08)
After Fix:
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
Random address: 5E:03:1C:00:38:21 (Resolvable)
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated key from P-256 (0x03)
@ MGMT Event: New Link Key (0x0009) plen 26
Store hint: Yes (0x01)
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated Combination key from P-256 (0x08)
Cc: stable@vger.kernel.org
Signed-off-by: Xiao Yao <xiaoyao@rock-chips.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
hci_conn_hash_lookup_cis shall always match the requested CIG and CIS
ids even when they are unset as otherwise it result in not being able
to bind/connect different sockets to the same address as that would
result in having multiple sockets mapping to the same hci_conn which
doesn't really work and prevents BAP audio configuration such as
AC 6(i) when CIG and CIS are left unset.
Fixes: c14516faede3 ("Bluetooth: hci_conn: Fix not matching by CIS ID")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The handle of new hci_conn is always HCI_CONN_HANDLE_MAX + 1 if
the handle of the first hci_conn entry in hci_dev->conn_hash->list
is not HCI_CONN_HANDLE_MAX + 1. Use ida to manage the allocation of
hci_conn->handle to make it be unique.
Fixes: 9f78191cc9f1 ("Bluetooth: hci_conn: Always allocate unique handles")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This fixes the cleanup callback for slave bis and pa sync hcons.
Closing all bis hcons will trigger BIG Terminate Sync, while closing
all bises and the pa sync hcon will also trigger PA Terminate Sync.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This enables a broadcast sink to be informed if the PA
it has synced with is associated with an encrypted BIG,
by retrieving the socket QoS and checking the encryption
field.
After PA sync has been successfully established and the
first BIGInfo advertising report is received, a new hcon
is added and notified to the ISO layer. The ISO layer
sets the encryption field of the socket and hcon QoS
according to the encryption parameter of the BIGInfo
advertising report event.
After that, the userspace is woken up, and the QoS of the
new PA sync socket can be read, to inspect the encryption
field and follow up accordingly.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This fixes the following warnings:
net/bluetooth/hci_core.c: In function ‘hci_register_dev’:
net/bluetooth/hci_core.c:2620:54: warning: ‘%d’ directive output may
be truncated writing between 1 and 10 bytes into a region of size 5
[-Wformat-truncation=]
2620 | snprintf(hdev->name, sizeof(hdev->name), "hci%d", id);
| ^~
net/bluetooth/hci_core.c:2620:50: note: directive argument in the range
[0, 2147483647]
2620 | snprintf(hdev->name, sizeof(hdev->name), "hci%d", id);
| ^~~~~~~
net/bluetooth/hci_core.c:2620:9: note: ‘snprintf’ output between 5 and
14 bytes into a destination of size 8
2620 | snprintf(hdev->name, sizeof(hdev->name), "hci%d", id);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This introduces HCI_QUIRK_BROKEN_LE_CODED which is used to indicate
that LE Coded PHY shall not be used, it is then set for some Intel
models that claim to support it but when used causes many problems.
Cc: stable@vger.kernel.org # 6.4.y+
Link: https://github.com/bluez/bluez/issues/577
Link: https://github.com/bluez/bluez/issues/582
Link: https://lore.kernel.org/linux-bluetooth/CABBYNZKco-v7wkjHHexxQbgwwSz-S=GZ=dZKbRE1qxT1h4fFbQ@mail.gmail.com/T/#
Fixes: 288c90224eec ("Bluetooth: Enable all supported LE PHY by default")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
There a few instances still using HCI_MAX_AD_LENGTH instead of using
max_adv_len which takes care of detecting what is the actual maximum
length depending on if the controller supports EA or not.
Fixes: 112b5090c219 ("Bluetooth: MGMT: Fix always using HCI_MAX_AD_LENGTH")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This commit implements defer setup support for the Broadcast Sink
scenario: By setting defer setup on a broadcast socket before calling
listen, the user is able to trigger the PA sync and BIG sync procedures
separately.
This is useful if the user first wants to synchronize to the periodic
advertising transmitted by a Broadcast Source, and trigger the BIG sync
procedure later on.
If defer setup is set, once a PA sync established event arrives, a new
hcon is created and notified to the ISO layer. A child socket associated
with the PA sync connection will be added to the accept queue of the
listening socket.
Once the accept call returns the fd for the PA sync child socket, the
user should call read on that fd. This will trigger the BIG create sync
procedure, and the PA sync socket will become a listening socket itself.
When the BIG sync established event is notified to the ISO layer, the
bis connections will be added to the accept queue of the PA sync parent.
The user should call accept on the PA sync socket to get the final bis
connections.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
