| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.17, round #1
- Host driver for GICv5, the next generation interrupt controller for
arm64, including support for interrupt routing, MSIs, interrupt
translation and wired interrupts.
- Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on
GICv5 hardware, leveraging the legacy VGIC interface.
- Userspace control of the 'nASSGIcap' GICv3 feature, allowing
userspace to disable support for SGIs w/o an active state on hardware
that previously advertised it unconditionally.
- Map supporting endpoints with cacheable memory attributes on systems
with FEAT_S2FWB and DIC where KVM no longer needs to perform cache
maintenance on the address range.
- Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the guest
hypervisor to inject external aborts into an L2 VM and take traps of
masked external aborts to the hypervisor.
- Convert more system register sanitization to the config-driven
implementation.
- Fixes to the visibility of EL2 registers, namely making VGICv3 system
registers accessible through the VGIC device instead of the ONE_REG
vCPU ioctls.
- Various cleanups and minor fixes.
|
|
* kvm-arm64/vgic-v4-ctl:
: Userspace control of nASSGIcap, courtesy of Raghavendra Rao Ananta
:
: Allow userspace to decide if support for SGIs without an active state is
: advertised to the guest, allowing VMs from GICv3-only hardware to be
: migrated to to GICv4.1 capable machines.
Documentation: KVM: arm64: Describe VGICv3 registers writable pre-init
KVM: arm64: selftests: Add test for nASSGIcap attribute
KVM: arm64: vgic-v3: Allow userspace to write GICD_TYPER2.nASSGIcap
KVM: arm64: vgic-v3: Allow access to GICD_IIDR prior to initialization
KVM: arm64: vgic-v3: Consolidate MAINT_IRQ handling
KVM: arm64: Disambiguate support for vSGIs v. vLPIs
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
KVM unconditionally advertises GICD_TYPER2.nASSGIcap (which internally
implies vSGIs) on GICv4.1 systems. Allow userspace to change whether a
VM supports the feature. Only allow changes prior to VGIC initialization
as at that point vPEs need to be allocated for the VM.
For convenience, bundle support for vLPIs and vSGIs behind this feature,
allowing userspace to control vPE allocation for VMs in environments
that may be constrained on vPE IDs.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250724062805.2658919-5-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Add support for GICv3 compat mode (FEAT_GCIE_LEGACY) which allows a
GICv5 host to run GICv3-based VMs. This change enables the
VHE/nVHE/hVHE/protected modes, but does not support nested
virtualization.
A lazy-disable approach is taken for compat mode; it is enabled on the
vgic_v3_load path but not disabled on the vgic_v3_put path. A
non-GICv3 VM, i.e., one based on GICv5, is responsible for disabling
compat mode on the corresponding vgic_v5_load path. Currently, GICv5
is not supported, and hence compat mode is not disabled again once it
is enabled, and this function is intentionally omitted from the code.
Co-authored-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Link: https://lore.kernel.org/r/20250627100847.1022515-5-sascha.bischoff@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Don't bother WARNing if updating an IRTE route fails now that vendor code
provides much more precise WARNs. The generic WARN doesn't provide enough
information to actually debug the problem, and has obviously done nothing
to surface the myriad bugs in KVM x86's implementation.
Drop all of the associated return code plumbing that existed just so that
common KVM could WARN.
Link: https://lore.kernel.org/r/20250611224604.313496-34-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The virtual mapping and "GSI" routing of a particular vLPI is subject to
change in response to the guest / userspace. This can be pretty annoying
to deal with when KVM needs to track the physical state that's managed
for vLPI direct injection.
Make vgic_v4_unset_forwarding() resilient by using the host IRQ to
resolve the vgic IRQ. Since this uses the LPI xarray directly, finding
the ITS by doorbell address + grabbing it's its_lock is no longer
necessary. Note that matching the right ITS / ITE is already handled in
vgic_v4_set_forwarding(), and unless there's a bug in KVM's VGIC ITS
emulation the virtual mapping that should remain stable for the lifetime
of the vLPI mapping.
Tested-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250523194722.4066715-4-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Emulating the vGIC means emulating the dreaded Maintenance Interrupt.
This is a two-pronged problem:
- while running L2, getting an MI translates into an MI injected
in the L1 based on the state of the HW.
- while running L1, we must accurately reflect the state of the
MI line, based on the in-memory state.
The MI INTID is added to the distributor, as expected on any
virtualisation-capable implementation, and further patches
will allow its configuration.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250225172930.1850838-11-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
When entering a nested VM, we set up the hypervisor control interface
based on what the guest hypervisor has set. Especially, we investigate
each list register written by the guest hypervisor whether HW bit is
set. If so, we translate hw irq number from the guest's point of view
to the real hardware irq number if there is a mapping.
Co-developed-by: Jintack Lim <jintack@cs.columbia.edu>
Signed-off-by: Jintack Lim <jintack@cs.columbia.edu>
[Christoffer: Redesigned execution flow around vcpu load/put]
Co-developed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
[maz: Rewritten to support GICv3 instead of GICv2, NV2 support]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250225172930.1850838-9-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Wire the handling of all GICv3 EL2 registers, and provide emulation
for all the non memory-backed registers (ICC_SRE_EL2, ICH_VTR_EL2,
ICH_MISR_EL2, ICH_ELRSR_EL2, and ICH_EISR_EL2).
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250225172930.1850838-7-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
VGIC_MAX_PRIVATE is a pretty useless definition, and is better
replaced with VGIC_NR_PRIVATE_IRQS.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241117165757.247686-4-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/misc-6.10:
: .
: Misc fixes and updates targeting 6.10
:
: - Improve boot-time diagnostics when the sysreg tables
: are not correctly sorted
:
: - Allow FFA_MSG_SEND_DIRECT_REQ in the FFA proxy
:
: - Fix duplicate XNX field in the ID_AA64MMFR1_EL1
: writeable mask
:
: - Allocate PPIs and SGIs outside of the vcpu structure, allowing
: for smaller EL2 mapping and some flexibility in implementing
: more or less than 32 private IRQs.
:
: - Use bitmap_gather() instead of its open-coded equivalent
:
: - Make protected mode use hVHE if available
:
: - Purge stale mpidr_data if a vcpu is created after the MPIDR
: map has been created
: .
KVM: arm64: Destroy mpidr_data for 'late' vCPU creation
KVM: arm64: Use hVHE in pKVM by default on CPUs with VHE support
KVM: arm64: Fix hvhe/nvhe early alias parsing
KVM: arm64: Convert kvm_mpidr_index() to bitmap_gather()
KVM: arm64: vgic: Allocate private interrupts on demand
KVM: arm64: Remove duplicated AA64MMFR1_EL1 XNX
KVM: arm64: Remove FFA_MSG_SEND_DIRECT_REQ from the denylist
KVM: arm64: Improve out-of-order sysreg table diagnostics
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/pkvm-6.10: (25 commits)
: .
: At last, a bunch of pKVM patches, courtesy of Fuad Tabba.
: From the cover letter:
:
: "This series is a bit of a bombay-mix of patches we've been
: carrying. There's no one overarching theme, but they do improve
: the code by fixing existing bugs in pKVM, refactoring code to
: make it more readable and easier to re-use for pKVM, or adding
: functionality to the existing pKVM code upstream."
: .
KVM: arm64: Force injection of a data abort on NISV MMIO exit
KVM: arm64: Restrict supported capabilities for protected VMs
KVM: arm64: Refactor setting the return value in kvm_vm_ioctl_enable_cap()
KVM: arm64: Document the KVM/arm64-specific calls in hypercalls.rst
KVM: arm64: Rename firmware pseudo-register documentation file
KVM: arm64: Reformat/beautify PTP hypercall documentation
KVM: arm64: Clarify rationale for ZCR_EL1 value restored on guest exit
KVM: arm64: Introduce and use predicates that check for protected VMs
KVM: arm64: Add is_pkvm_initialized() helper
KVM: arm64: Simplify vgic-v3 hypercalls
KVM: arm64: Move setting the page as dirty out of the critical section
KVM: arm64: Change kvm_handle_mmio_return() return polarity
KVM: arm64: Fix comment for __pkvm_vcpu_init_traps()
KVM: arm64: Prevent kmemleak from accessing .hyp.data
KVM: arm64: Do not map the host fpsimd state to hyp in pKVM
KVM: arm64: Rename __tlb_switch_to_{guest,host}() in VHE
KVM: arm64: Support TLB invalidation in guest context
KVM: arm64: Avoid BBM when changing only s/w bits in Stage-2 PTE
KVM: arm64: Check for PTE validity when checking for executable/cacheable
KVM: arm64: Avoid BUG-ing from the host abort path
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Private interrupts are currently part of the CPU interface structure
that is part of each and every vcpu we create.
Currently, we have 32 of them per vcpu, resulting in a per-vcpu array
that is just shy of 4kB. On its own, that's no big deal, but it gets
in the way of other things:
- each vcpu gets mapped at EL2 on nVHE/hVHE configurations. This
requires memory that is physically contiguous. However, the EL2
code has no purpose looking at the interrupt structures and
could do without them being mapped.
- supporting features such as EPPIs, which extend the number of
private interrupts past the 32 limit would make the array
even larger, even for VMs that do not use the EPPI feature.
Address these issues by moving the private interrupt array outside
of the vcpu, and replace it with a simple pointer. We take this
opportunity to make it obvious what gets initialised when, as
that path was remarkably opaque, and tighten the locking.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240502154545.3012089-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Consolidate the GICv3 VMCR accessor hypercalls into the APR save/restore
hypercalls so that all of the EL2 GICv3 state is covered by a single pair
of hypercalls.
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-17-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The last genuine use case for the lpi_list_lock was the global LPI
translation cache, which has been removed in favor of a per-ITS xarray.
Remove a layer from the locking puzzle by getting rid of it.
vgic_add_lpi() still has a critical section that needs to protect
against the insertion of other LPIs; change it to take the LPI xarray's
xa_lock to retain this property.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-13-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The MSI injection fast path has been transitioned away from the global
translation cache. Rip it out.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-12-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Within the context of a single ITS, it is possible to use an xarray to
cache the device ID & event ID translation to a particular irq
descriptor. Take advantage of this to build a translation cache capable
of fitting all valid translations for a given ITS.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-9-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The last user has been transitioned to walking the LPI xarray directly.
Cut the wart off, and get rid of the now unneeded lpi_count while doing
so.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-7-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The vgic debug iterator is the final user of vgic_copy_lpi_list(), but
is a bit more complicated to transition to something else. Use a mark
in the LPI xarray to record the indices 'known' to the debug iterator.
Protect against the LPIs from being freed by associating an additional
reference with the xarray mark.
Rework iter_next() to let the xarray walk 'drive' the iteration after
visiting all of the SGIs, PPIs, and SPIs.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-6-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Free the vgic_irq structs in an RCU-safe manner to allow reads of the
LPI configuration data to happen in parallel with the release of LPIs.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240221054253.3848076-8-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Switch to using atomics for LPI accounting, allowing vgic_irq references
to be dropped in parallel.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240221054253.3848076-7-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
All readers of LPI configuration have been transitioned to use the LPI
xarray. Get rid of the linked-list altogether.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240221054253.3848076-6-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Using a linked-list for LPIs is less than ideal as it of course requires
iterative searches to find a particular entry. An xarray is a better
data structure for this use case, as it provides faster searches and can
still handle a potentially sparse range of INTID allocations.
Start by storing LPIs in an xarray, punting usage of the xarray to a
subsequent change. The observant among you will notice that we added yet
another lock to the chain of locking order rules; document the ordering
of the xa_lock. Don't worry, we'll get rid of the lpi_list_lock one
day...
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240221054253.3848076-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Passing a vcpu_id to kvm_vgic_inject_irq() is silly for two reasons:
- we often confuse vcpu_id and vcpu_idx
- we eventually have to convert it back to a vcpu
- we can't count
Instead, pass a vcpu pointer, which is unambiguous. A NULL vcpu
is also allowed for interrupts that are not private to a vcpu
(such as SPIs).
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230927090911.3355209-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Xiang reports that VMs occasionally fail to boot on GICv4.1 systems when
running a preemptible kernel, as it is possible that a vCPU is blocked
without requesting a doorbell interrupt.
The issue is that any preemption that occurs between vgic_v4_put() and
schedule() on the block path will mark the vPE as nonresident and *not*
request a doorbell irq. This occurs because when the vcpu thread is
resumed on its way to block, vcpu_load() will make the vPE resident
again. Once the vcpu actually blocks, we don't request a doorbell
anymore, and the vcpu won't be woken up on interrupt delivery.
Fix it by tracking that we're entering WFI, and key the doorbell
request on that flag. This allows us not to make the vPE resident
when going through a preempt/schedule cycle, meaning we don't lose
any state.
Cc: stable@vger.kernel.org
Fixes: 8e01d9a396e6 ("KVM: arm64: vgic-v4: Move the GICv4 residency flow to be driven by vcpu_load/put")
Reported-by: Xiang Chen <chenxiang66@hisilicon.com>
Suggested-by: Zenghui Yu <yuzenghui@huawei.com>
Tested-by: Xiang Chen <chenxiang66@hisilicon.com>
Co-developed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20230713070657.3873244-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Emulating EL2 also means emulating the EL2 timers. To do so, we expand
our timer framework to deal with at most 4 timers. At any given time,
two timers are using the HW timers, and the two others are purely
emulated.
The role of deciding which is which at any given time is left to a
mapping function which is called every time we need to make such a
decision.
Reviewed-by: Colton Lewis <coltonlewis@google.com>
Co-developed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230330174800.2677007-18-maz@kernel.org
|
|
KVM/riscv changes for 6.3
- Fix wrong usage of PGDIR_SIZE to check page sizes
- Fix privilege mode setting in kvm_riscv_vcpu_trap_redirect()
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
|
|
Currently, the unknown no-running-vcpu sites are reported when a
dirty page is tracked by mark_page_dirty_in_slot(). Until now, the
only known no-running-vcpu site is saving vgic/its tables through
KVM_DEV_ARM_{VGIC_GRP_CTRL, ITS_SAVE_TABLES} command on KVM device
"kvm-arm-vgic-its". Unfortunately, there are more unknown sites to
be handled and no-running-vcpu context will be allowed in these
sites: (1) KVM_DEV_ARM_{VGIC_GRP_CTRL, ITS_RESTORE_TABLES} command
on KVM device "kvm-arm-vgic-its" to restore vgic/its tables. The
vgic3 LPI pending status could be restored. (2) Save vgic3 pending
table through KVM_DEV_ARM_{VGIC_GRP_CTRL, VGIC_SAVE_PENDING_TABLES}
command on KVM device "kvm-arm-vgic-v3".
In order to handle those unknown cases, we need a unified helper
vgic_write_guest_lock(). struct vgic_dist::save_its_tables_in_progress
is also renamed to struct vgic_dist::save_tables_in_progress.
No functional change intended.
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230126235451.469087-3-gshan@redhat.com
|
|
For a number of historical reasons, the KVM/arm64 hotplug setup is pretty
complicated, and we have two extra CPUHP notifiers for vGIC and timers.
It looks pretty pointless, and gets in the way of further changes.
So let's just expose some helpers that can be called from the core
CPUHP callback, and get rid of everything else.
This gives us the opportunity to drop a useless notifier entry,
as well as tidy-up the timer enable/disable, which was a bit odd.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-17-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Enable ring-based dirty memory tracking on ARM64:
- Enable CONFIG_HAVE_KVM_DIRTY_RING_ACQ_REL.
- Enable CONFIG_NEED_KVM_DIRTY_RING_WITH_BITMAP.
- Set KVM_DIRTY_LOG_PAGE_OFFSET for the ring buffer's physical page
offset.
- Add ARM64 specific kvm_arch_allow_write_without_running_vcpu() to
keep the site of saving vgic/its tables out of the no-running-vcpu
radar.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110104914.31280-5-gshan@redhat.com
|
|
Align kvm_vgic_addr() with the rest of the code by moving the
userspace accesses into it. kvm_vgic_addr() is also made static.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
We carry a legacy interface to set the base addresses for GICv2.
As this is currently plumbed into the same handling code as
the modern interface, it limits the evolution we can make there.
Add a helper dedicated to this handling, with a view of maybe
removing this in the future.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Since adversising GICR_CTLR.{IC,CES} is directly observable from
a guest, we need to make it selectable from userspace.
For that, bump the default GICD_IIDR revision and let userspace
downgrade it to the previous default. For GICv2, the two distributor
revisions are strictly equivalent.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220405182327.205520-5-maz@kernel.org
|
|
Since GICv4.1, it has become legal for an implementation to advertise
GICR_{INVLPIR,INVALLR,SYNCR} while having an ITS, allowing for a more
efficient invalidation scheme (no guest command queue contention when
multiple CPUs are generating invalidations).
Provide the invalidation registers as a primitive to their ITS
counterpart. Note that we don't advertise them to the guest yet
(the architecture allows an implementation to do this).
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Oliver Upton <oupton@google.com>
Link: https://lore.kernel.org/r/20220405182327.205520-4-maz@kernel.org
|
|
When disabling LPIs, a guest needs to poll GICR_CTLR.RWP in order
to be sure that the write has taken effect. We so far reported it
as 0, as we didn't advertise that LPIs could be turned off the
first place.
Start tracking this state during which LPIs are being disabled,
and expose the 'in progress' state via the RWP bit.
We also take this opportunity to disallow enabling LPIs and programming
GICR_{PEND,PROP}BASER while LPI disabling is in progress, as allowed by
the architecture (UNPRED behaviour).
We don't advertise the feature to the guest yet (which is allowed by
the architecture).
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220405182327.205520-3-maz@kernel.org
|
|
arm_vgic.h does not require all the stuff that kernel.h provides.
Replace kernel.h inclusion with the list of what is really being used.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220104151940.55399-1-andriy.shevchenko@linux.intel.com
|
|
In order to deal with these systems that do not offer HW-based
deactivation of interrupts, let implement a SW-based approach:
- When the irq is queued into a LR, treat it as a pure virtual
interrupt and set the EOI flag in the LR.
- When the interrupt state is read back from the LR, force a
deactivation when the state is invalid (neither active nor
pending)
Interrupts requiring such treatment get the VGIC_SW_RESAMPLE flag.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
We already have the option to attach a callback to an interrupt
to retrieve its pending state. As we are planning to expand this
facility, move this callback into its own data structure.
This will limit the size of individual interrupts as the ops
structures can be shared across multiple interrupts.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The vGIC, as architected by ARM, allows a virtual interrupt to
trigger the deactivation of a physical interrupt. This allows
the following interrupt to be delivered without requiring an exit.
However, some implementations have choosen not to implement this,
meaning that we will need some unsavoury workarounds to deal with this.
On detecting such a case, taint the kernel and spit a nastygram.
We'll deal with this in later patches.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Commit 23bde34771f1 ("KVM: arm64: vgic-v3: Drop the
reporting of GICR_TYPER.Last for userspace") temporarily fixed
a bug identified when attempting to access the GICR_TYPER
register before the redistributor region setting, but dropped
the support of the LAST bit.
Emulating the GICR_TYPER.Last bit still makes sense for
architecture compliance though. This patch restores its support
(if the redistributor region was set) while keeping the code safe.
We introduce a new helper, vgic_mmio_vcpu_rdist_is_last() which
computes whether a redistributor is the highest one of a series
of redistributor contributor pages.
With this new implementation we do not need to have a uaccess
read accessor anymore.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210405163941.510258-9-eric.auger@redhat.com
|
|
In order to reduce the impact of the VPT parsing happening on the GIC,
we can split the vcpu reseidency in two phases:
- programming GICR_VPENDBASER: this still happens in vcpu_load()
- checking for the VPT parsing to be complete: this can happen
on vcpu entry (in kvm_vgic_flush_hwstate())
This allows the GIC and the CPU to work in parallel, rewmoving some
of the entry overhead.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Shenming Lu <lushenming@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201128141857.983-3-lushenming@huawei.com
|
|
If we move the used_lrs field to the version-specific cpu interface
structure, the following functions only operate on the struct
vgic_v3_cpu_if and not the full vcpu:
__vgic_v3_save_state
__vgic_v3_restore_state
__vgic_v3_activate_traps
__vgic_v3_deactivate_traps
__vgic_v3_save_aprs
__vgic_v3_restore_aprs
This is going to be very useful for nested virt, so move the used_lrs
field and change the prototypes and implementations of these functions to
take the cpu_if parameter directly.
No functional change.
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In order to let a guest buy in the new, active-less SGIs, we
need to be able to switch between the two modes.
Handle this by stopping all guest activity, transfer the state
from one mode to the other, and resume the guest. Nothing calls
this code so far, but a later patch will plug it into the MMIO
emulation.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-20-maz@kernel.org
|
|
In order to hide some of the differences between v4.0 and v4.1, move
the doorbell management out of the KVM code, and into the GICv4-specific
layer. This allows the calling code to ask for the doorbell when blocking,
and otherwise to leave the doorbell permanently disabled.
This matches the v4.1 code perfectly, and only results in a minor
refactoring of the v4.0 code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-14-maz@kernel.org
|
|
Fix various comments, including wrong function names, grammar mistakes
and specification references.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20191029071919.177-3-yuzenghui@huawei.com
|
|
The callsite of kvm_send_userspace_msi() is currently arch agnostic.
There seems no reason to keep an extra declaration of it in arm_vgic.h
(we already have one in include/linux/kvm_host.h).
Remove it.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20191029071919.177-2-yuzenghui@huawei.com
|
|
When the VHE code was reworked, a lot of the vgic stuff was moved around,
but the GICv4 residency code did stay untouched, meaning that we come
in and out of residency on each flush/sync, which is obviously suboptimal.
To address this, let's move things around a bit:
- Residency entry (flush) moves to vcpu_load
- Residency exit (sync) moves to vcpu_put
- On blocking (entry to WFI), we "put"
- On unblocking (exit from WFI), we "load"
Because these can nest (load/block/put/load/unblock/put, for example),
we now have per-VPE tracking of the residency state.
Additionally, vgic_v4_put gains a "need doorbell" parameter, which only
gets set to true when blocking because of a WFI. This allows a finer
control of the doorbell, which now also gets disabled as soon as
it gets signaled.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20191027144234.8395-2-maz@kernel.org
|
|
At the moment we use 2 IO devices per GICv3 redistributor: one
one for the RD_base frame and one for the SGI_base frame.
Instead we can use a single IO device per redistributor (the 2
frames are contiguous). This saves slots on the KVM_MMIO_BUS
which is currently limited to NR_IOBUS_DEVS (1000).
This change allows to instantiate up to 512 redistributors and may
speed the guest boot with a large number of VCPUs.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add the basic data structure that expresses an MSI to LPI
translation as well as the allocation/release hooks.
The size of the cache is arbitrarily defined as 16*nr_vcpus.
Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Since commit commit 328e56647944 ("KVM: arm/arm64: vgic: Defer
touching GICH_VMCR to vcpu_load/put"), we leave ICH_VMCR_EL2 (or
its GICv2 equivalent) loaded as long as we can, only syncing it
back when we're scheduled out.
There is a small snag with that though: kvm_vgic_vcpu_pending_irq(),
which is indirectly called from kvm_vcpu_check_block(), needs to
evaluate the guest's view of ICC_PMR_EL1. At the point were we
call kvm_vcpu_check_block(), the vcpu is still loaded, and whatever
changes to PMR is not visible in memory until we do a vcpu_put().
Things go really south if the guest does the following:
mov x0, #0 // or any small value masking interrupts
msr ICC_PMR_EL1, x0
[vcpu preempted, then rescheduled, VMCR sampled]
mov x0, #ff // allow all interrupts
msr ICC_PMR_EL1, x0
wfi // traps to EL2, so samping of VMCR
[interrupt arrives just after WFI]
Here, the hypervisor's view of PMR is zero, while the guest has enabled
its interrupts. kvm_vgic_vcpu_pending_irq() will then say that no
interrupts are pending (despite an interrupt being received) and we'll
block for no reason. If the guest doesn't have a periodic interrupt
firing once it has blocked, it will stay there forever.
To avoid this unfortuante situation, let's resync VMCR from
kvm_arch_vcpu_blocking(), ensuring that a following kvm_vcpu_check_block()
will observe the latest value of PMR.
This has been found by booting an arm64 Linux guest with the pseudo NMI
feature, and thus using interrupt priorities to mask interrupts instead
of the usual PSTATE masking.
Cc: stable@vger.kernel.org # 4.12
Fixes: 328e56647944 ("KVM: arm/arm64: vgic: Defer touching GICH_VMCR to vcpu_load/put")
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
