| Age | Commit message (Collapse) | Author |
|---|
|
Make a number of updates to the netfs tracepoints:
(1) Remove a duplicate trace from netfs_unbuffered_write_iter_locked().
(2) Move the trace in netfs_wake_rreq_flag() to after the flag is cleared
so that the change appears in the trace.
(3) Differentiate the use of netfs_rreq_trace_wait/woke_queue symbols.
(4) Don't do so many trace emissions in the wait functions as some of them
are redundant.
(5) In netfs_collect_read_results(), differentiate a subreq that's being
abandoned vs one that has been consumed in a regular way.
(6) Add a tracepoint to indicate the call to ->ki_complete().
(7) Don't double-increment the subreq_counter when retrying a write.
(8) Move the netfs_sreq_trace_io_progress tracepoint within cifs code to
just MID_RESPONSE_RECEIVED and add different tracepoints for other MID
states and note check failure.
Signed-off-by: David Howells <dhowells@redhat.com>
Co-developed-by: Paulo Alcantara <pc@manguebit.org>
Signed-off-by: Paulo Alcantara <pc@manguebit.org>
Link: https://lore.kernel.org/20250701163852.2171681-14-dhowells@redhat.com
cc: Steve French <sfrench@samba.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
netfs_wait_for_request() and netfs_wait_for_pause() can loop forever if
netfs_collect_in_app() returns 2, indicating that it wants to repeat
because the ALL_QUEUED flag isn't yet set and there are no subreqs left
that haven't been collected.
The problem is that, unless collection is offloaded (OFFLOAD_COLLECTION),
we have to return to the application thread to continue and eventually set
ALL_QUEUED after pausing to deal with a retry - but we never get there.
Fix this by inserting checks for the IN_PROGRESS and PAUSE flags as
appropriate before cycling round - and add cond_resched() for good measure.
Fixes: 2b1424cd131c ("netfs: Fix wait/wake to be consistent about the waitqueue used")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250701163852.2171681-5-dhowells@redhat.com
Tested-by: Steve French <sfrench@samba.org>
Reviewed-by: Paulo Alcantara <pc@manguebit.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Provide helpers to clear and test the NETFS_RREQ_IN_PROGRESS and to insert
the appropriate barrierage.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250701163852.2171681-4-dhowells@redhat.com
Tested-by: Steve French <sfrench@samba.org>
Reviewed-by: Paulo Alcantara <pc@manguebit.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
If a netfs request finishes during the pause loop, it will have the ref
that belongs to the IN_PROGRESS flag removed at that point - however, if it
then goes to the final wait loop, that will *also* put the ref because it
sees that the IN_PROGRESS flag is clear and incorrectly assumes that this
happened when it called the collector.
In fact, since IN_PROGRESS is clear, we shouldn't call the collector again
since it's done all the cleanup, such as calling ->ki_complete().
Fix this by making netfs_collect_in_app() just return, indicating that
we're done if IN_PROGRESS is removed.
Fixes: 2b1424cd131c ("netfs: Fix wait/wake to be consistent about the waitqueue used")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250701163852.2171681-3-dhowells@redhat.com
Tested-by: Steve French <sfrench@samba.org>
Reviewed-by: Paulo Alcantara <pc@manguebit.org>
cc: Steve French <sfrench@samba.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When doing a DIO read, if the subrequests we issue fail and cause the
request PAUSE flag to be set to put a pause on subrequest generation, we
may complete collection of the subrequests (possibly discarding them) prior
to the ALL_QUEUED flags being set.
In such a case, netfs_read_collection() doesn't see ALL_QUEUED being set
after netfs_collect_read_results() returns and will just return to the app
(the collector can be seen unpausing the generator in the trace log).
The subrequest generator can then set ALL_QUEUED and the app thread reaches
netfs_wait_for_request(). This causes netfs_collect_in_app() to be called
to see if we're done yet, but there's missing case here.
netfs_collect_in_app() will see that a thread is active and set inactive to
false, but won't see any subrequests in the read stream, and so won't set
need_collect to true. The function will then just return 0, indicating
that the caller should just sleep until further activity (which won't be
forthcoming) occurs.
Fix this by making netfs_collect_in_app() check to see if an active thread
is complete - i.e. that ALL_QUEUED is set and the subrequests list is empty
- and to skip the sleep return path. The collector will then be called
which will clear the request IN_PROGRESS flag, allowing the app to
progress.
Fixes: 2b1424cd131c ("netfs: Fix wait/wake to be consistent about the waitqueue used")
Reported-by: Steve French <sfrench@samba.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250701163852.2171681-2-dhowells@redhat.com
Tested-by: Steve French <sfrench@samba.org>
Reviewed-by: Paulo Alcantara <pc@manguebit.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
On cifs, "DIO reads" (specified by O_DIRECT) need to be differentiated from
"unbuffered reads" (specified by cache=none in the mount parameters). The
difference is flagged in the protocol and the server may behave
differently: Windows Server will, for example, mandate that DIO reads are
block aligned.
Fix this by adding a NETFS_UNBUFFERED_READ to differentiate this from
NETFS_DIO_READ, parallelling the write differentiation that already exists.
cifs will then do the right thing.
Fixes: 016dc8516aec ("netfs: Implement unbuffered/DIO read support")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/3444961.1747987072@warthog.procyon.org.uk
Reviewed-by: "Paulo Alcantara (Red Hat)" <pc@manguebit.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
cc: Steve French <sfrench@samba.org>
cc: netfs@lists.linux.dev
cc: v9fs@lists.linux.dev
cc: linux-afs@lists.infradead.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: linux-nfs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Fix further inconsistencies in the use of waitqueues
(clear_and_wake_up_bit() vs private waitqueue).
Move some of this stuff from the read and write sides into common code so
that it can be done in fewer places.
To make this work, async I/O needs to set NETFS_RREQ_OFFLOAD_COLLECTION to
indicate that a workqueue will do the collecting and places that call the
wait function need to deal with it returning the amount transferred.
Fixes: e2d46f2ec332 ("netfs: Change the read result collector to only use one work item")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250519090707.2848510-5-dhowells@redhat.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Steve French <stfrench@microsoft.com>
cc: Ihor Solodrai <ihor.solodrai@pm.me>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: v9fs@lists.linux.dev
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add two netfslib functions to build up or clean up a buffer in a
folio_queue. The first, netfs_alloc_folioq_buffer() will add folios to a
buffer, extending up at least to the given size. If it can, it will add
multipage folios. The folios are optionally have the mapping set and will
have the index set according to the distance from the front of the folio
queue.
The second function will free up a folio queue and put any folios in the
queue that have the first mark set.
The netfs_folio tracepoint is also altered to cope with folios that have a
NULL mapping, and the folios being added/put will have trace lines emitted
and will be accounted in the stats.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-19-dhowells@redhat.com
cc: Jeff Layton <jlayton@kernel.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: netfs@lists.linux.dev
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
A rolling buffer is a series of folios held in a list of folio_queues. New
folios and folio_queue structs may be inserted at the head simultaneously
with spent ones being removed from the tail without the need for locking.
The rolling buffer includes an iov_iter and it has to be careful managing
this as the list of folio_queues is extended such that an oops doesn't
incurred because the iterator was pointing to the end of a folio_queue
segment that got appended to and then removed.
We need to use the mechanism twice, once for read and once for write, and,
in future patches, we will use a second rolling buffer to handle bounce
buffering for content encryption.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-6-dhowells@redhat.com
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a tracepoint to log the lifespan of folio_queue structs. For tracing
illustrative purposes, folio_queues are tagged with the debug ID of
whatever they're related to (typically a netfs_io_request) and a debug ID
of their own.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-5-dhowells@redhat.com
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Provide and use folio_queue allocation and free functions to combine the
allocation, initialisation and stat (un)accounting steps that are repeated
in several places.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-4-dhowells@redhat.com
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Use folioq_count instead of folioq_nr_slots to fix a KMSAN uninit-value
error in netfs_clear_buffer
Signed-off-by: Chang Yu <marcus.yu.56@gmail.com>
Link: https://lore.kernel.org/r/ZvuXWC2bYpvQsWgS@gmail.com
Fixes: cd0277ed0c18 ("netfs: Use new folio_queue data type and iterator instead of xarray iter")
Acked-by: David Howells <dhowells@redhat.com>
Reported-by: syzbot+921873345a95f4dae7e9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=921873345a95f4dae7e9
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In netfslib, a buffered writeback operation has a 'write queue' of folios
that are being written, held in a linear sequence of folio_queue structs.
The 'issuer' adds new folio_queues on the leading edge of the queue and
populates each one progressively; the 'collector' pops them off the
trailing edge and discards them and the folios they point to as they are
consumed.
The queue is required to always retain at least one folio_queue structure.
This allows the queue to be accessed without locking and with just a bit of
barriering.
When a new subrequest is prepared, its ->io_iter iterator is pointed at the
current end of the write queue and then the iterator is extended as more
data is added to the queue until the subrequest is committed.
Now, the problem is that the folio_queue at the leading edge of the write
queue when a subrequest is prepared might have been entirely consumed - but
not yet removed from the queue as it is the only remaining one and is
preventing the queue from collapsing.
So, what happens is that subreq->io_iter is pointed at the spent
folio_queue, then a new folio_queue is added, and, at that point, the
collector is at entirely at liberty to immediately delete the spent
folio_queue.
This leaves the subreq->io_iter pointing at a freed object. If the system
is lucky, iterate_folioq() sees ->io_iter, sees the as-yet uncorrupted
freed object and advances to the next folio_queue in the queue.
In the case seen, however, the freed object gets recycled and put back onto
the queue at the tail and filled to the end. This confuses
iterate_folioq() and it tries to step ->next, which may be NULL - resulting
in an oops.
Fix this by the following means:
(1) When preparing a write subrequest, make sure there's a folio_queue
struct with space in it at the leading edge of the queue. A function
to make space is split out of the function to append a folio so that
it can be called for this purpose.
(2) If the request struct iterator is pointing to a completely spent
folio_queue when we make space, then advance the iterator to the newly
allocated folio_queue. The subrequest's iterator will then be set
from this.
The oops could be triggered using the generic/346 xfstest with a filesystem
on9P over TCP with cache=loose. The oops looked something like:
BUG: kernel NULL pointer dereference, address: 0000000000000008
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
...
RIP: 0010:_copy_from_iter+0x2db/0x530
...
Call Trace:
<TASK>
...
p9pdu_vwritef+0x3d8/0x5d0
p9_client_prepare_req+0xa8/0x140
p9_client_rpc+0x81/0x280
p9_client_write+0xcf/0x1c0
v9fs_issue_write+0x87/0xc0
netfs_advance_write+0xa0/0xb0
netfs_write_folio.isra.0+0x42d/0x500
netfs_writepages+0x15a/0x1f0
do_writepages+0xd1/0x220
filemap_fdatawrite_wbc+0x5c/0x80
v9fs_mmap_vm_close+0x7d/0xb0
remove_vma+0x35/0x70
vms_complete_munmap_vmas+0x11a/0x170
do_vmi_align_munmap+0x17d/0x1c0
do_vmi_munmap+0x13e/0x150
__vm_munmap+0x92/0xd0
__x64_sys_munmap+0x17/0x20
do_syscall_64+0x80/0xe0
entry_SYSCALL_64_after_hwframe+0x71/0x79
This also fixed a similar-looking issue with cifs and generic/074.
Fixes: cd0277ed0c18 ("netfs: Use new folio_queue data type and iterator instead of xarray iter")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202409180928.f20b5a08-oliver.sang@intel.com
Closes: https://lore.kernel.org/oe-lkp/202409131438.3f225fbf-oliver.sang@intel.com
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: kernel test robot <oliver.sang@intel.com>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: v9fs@lists.linux.dev
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Provide a function to reset the iterator on a subrequest.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240814203850.2240469-17-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Make the netfs write-side routines use the new folio_queue struct to hold a
rolling buffer of folios, with the issuer adding folios at the tail and the
collector removing them from the head as they're processed instead of using
an xarray.
This will allow a subsequent patch to simplify the write collector.
The primary mark (as tested by folioq_is_marked()) is used to note if the
corresponding folio needs putting.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240814203850.2240469-16-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When netfslib writes to a folio that it doesn't have data for, but that
data exists on the server, it will make a 'streaming write' whereby it
stores data in a folio that is marked dirty, but not uptodate. When it
does this, it attaches a record to folio->private to track the dirty
region.
When truncate() or fallocate() wants to invalidate part of such a folio, it
will call into ->invalidate_folio(), specifying the part of the folio that
is to be invalidated. netfs_invalidate_folio(), on behalf of the
filesystem, must then determine how to trim the streaming write record. In
a couple of cases, however, it does this incorrectly (the reduce-length and
move-start cases are switched over and don't, in any case, calculate the
value correctly).
Fix this by making the logic tree more obvious and fixing the cases.
Fixes: 9ebff83e6481 ("netfs: Prep to use folio->private for write grouping and streaming write")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20240823200819.532106-5-dhowells@redhat.com
cc: Matthew Wilcox (Oracle) <willy@infradead.org>
cc: Pankaj Raghav <p.raghav@samsung.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: netfs@lists.linux.dev
cc: linux-mm@kvack.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Fix netfs_release_folio() to say no (ie. return false) if the folio is
dirty (analogous with iomap's behaviour). Without this, it will say yes to
the release of a dirty page by split_huge_page_to_list_to_order(), which
will result in the loss of untruncated data in the folio.
Without this, the generic/075 and generic/112 xfstests (both fsx-based
tests) fail with minimum folio size patches applied[1].
Fixes: c1ec4d7c2e13 ("netfs: Provide invalidate_folio and release_folio calls")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20240815090849.972355-1-kernel@pankajraghav.com/ [1]
Link: https://lore.kernel.org/r/20240823200819.532106-4-dhowells@redhat.com
cc: Matthew Wilcox (Oracle) <willy@infradead.org>
cc: Pankaj Raghav <p.raghav@samsung.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: netfs@lists.linux.dev
cc: linux-mm@kvack.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
folio->private and marking dirty"
This partially reverts commit 2ff1e97587f4d398686f52c07afde3faf3da4e5c.
In addition to reverting the removal of PG_private_2 wrangling from the
buffered read code[1][2], the removal of the waits for PG_private_2 from
netfs_release_folio() and netfs_invalidate_folio() need reverting too.
It also adds a wait into ceph_evict_inode() to wait for netfs read and
copy-to-cache ops to complete.
Fixes: 2ff1e97587f4 ("netfs: Replace PG_fscache by setting folio->private and marking dirty")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/3575457.1722355300@warthog.procyon.org.uk [1]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=8e5ced7804cb9184c4a23f8054551240562a8eda [2]
Link: https://lore.kernel.org/r/20240814203850.2240469-2-dhowells@redhat.com
cc: Max Kellermann <max.kellermann@ionos.com>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Xiubo Li <xiubli@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Matthew Wilcox <willy@infradead.org>
cc: ceph-devel@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Revert commit 163eae0fb0d4c610c59a8de38040f8e12f89fd43 to get back the
original operation of the debugging macros.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20240608151352.22860-2-ukleinek@kernel.org
Link: https://lore.kernel.org/r/1410685.1721333252@warthog.procyon.org.uk
cc: Uwe Kleine-König <ukleinek@kernel.org>
cc: Christian Brauner <brauner@kernel.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"cachefiles:
- Export an existing and add a new cachefile helper to be used in
filesystems to fix reference count bugs
- Use the newly added fscache_ty_get_volume() helper to get a
reference count on an fscache_volume to handle volumes that are
about to be removed cleanly
- After withdrawing a fscache_cache via FSCACHE_CACHE_IS_WITHDRAWN
wait for all ongoing cookie lookups to complete and for the object
count to reach zero
- Propagate errors from vfs_getxattr() to avoid an infinite loop in
cachefiles_check_volume_xattr() because it keeps seeing ESTALE
- Don't send new requests when an object is dropped by raising
CACHEFILES_ONDEMAND_OJBSTATE_DROPPING
- Cancel all requests for an object that is about to be dropped
- Wait for the ondemand_boject_worker to finish before dropping a
cachefiles object to prevent use-after-free
- Use cyclic allocation for message ids to better handle id recycling
- Add missing lock protection when iterating through the xarray when
polling
netfs:
- Use standard logging helpers for debug logging
VFS:
- Fix potential use-after-free in file locks during
trace_posix_lock_inode(). The tracepoint could fire while another
task raced it and freed the lock that was requested to be traced
- Only increment the nr_dentry_negative counter for dentries that are
present on the superblock LRU. Currently, DCACHE_LRU_LIST list is
used to detect this case. However, the flag is also raised in
combination with DCACHE_SHRINK_LIST to indicate that dentry->d_lru
is used. So checking only DCACHE_LRU_LIST will lead to wrong
nr_dentry_negative count. Fix the check to not count dentries that
are on a shrink related list
Misc:
- hfsplus: fix an uninitialized value issue in copy_name
- minix: fix minixfs_rename with HIGHMEM. It still uses kunmap() even
though we switched it to kmap_local_page() a while ago"
* tag 'vfs-6.10-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
minixfs: Fix minixfs_rename with HIGHMEM
hfsplus: fix uninit-value in copy_name
vfs: don't mod negative dentry count when on shrinker list
filelock: fix potential use-after-free in posix_lock_inode
cachefiles: add missing lock protection when polling
cachefiles: cyclic allocation of msg_id to avoid reuse
cachefiles: wait for ondemand_object_worker to finish when dropping object
cachefiles: cancel all requests for the object that is being dropped
cachefiles: stop sending new request when dropping object
cachefiles: propagate errors from vfs_getxattr() to avoid infinite loop
cachefiles: fix slab-use-after-free in cachefiles_withdraw_cookie()
cachefiles: fix slab-use-after-free in fscache_withdraw_volume()
netfs, fscache: export fscache_put_volume() and add fscache_try_get_volume()
netfs: Switch debug logging to pr_debug()
|
|
Delete some xarray-based buffer wangling functions that are intended for
use with bounce buffering, but aren't used because bounce-buffering got
deferred to a later patch series. Now, however, the intention is to use
something other than an xarray to do this.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240620173137.610345-9-dhowells@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Instead of inventing a custom way to conditionally enable debugging,
just make use of pr_debug(), which also has dynamic debugging facilities
and is more likely known to someone who hunts a problem in the netfs
code. Also drop the module parameter netfs_debug which didn't have any
effect without further source changes. (The variable netfs_debug was
only used in #ifdef blocks for cpp vars that don't exist; Note that
CONFIG_NETFS_DEBUG isn't settable via kconfig, a variable with that name
never existed in the mainline and is probably just taken over (and
renamed) from similar custom debug logging implementations.)
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Link: https://lore.kernel.org/r/20240608151352.22860-2-ukleinek@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When dirty data is being written to the cache, setting/waiting on/clearing
the fscache flag is always done in tandem with setting/waiting on/clearing
the writeback flag. The netfslib buffered write routines wait on and set
both flags and the write request cleanup clears both flags, so the fscache
flag is almost superfluous.
The reason it isn't superfluous is because the fscache flag is also used to
indicate that data just read from the server is being written to the cache.
The flag is used to prevent a race involving overlapping direct-I/O writes
to the cache.
Change this to indicate that a page is in need of being copied to the cache
by placing a magic value in folio->private and marking the folios dirty.
Then when the writeback code sees a folio marked in this way, it only
writes it to the cache and not to the server.
If a folio that has this magic value set is modified, the value is just
replaced and the folio will then be uplodaded too.
With this, PG_fscache is no longer required by the netfslib core, 9p and
afs.
Ceph and nfs, however, still need to use the old PG_fscache-based tracking.
To deal with this, a flag, NETFS_ICTX_USE_PGPRIV2, now has to be set on the
flags in the netfs_inode struct for those filesystems. This reenables the
use of PG_fscache in that inode. 9p and afs use the netfslib write helpers
so get switched over; cifs, for the moment, does page-by-page manual access
to the cache, so doesn't use PG_fscache and is unaffected.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Matthew Wilcox (Oracle) <willy@infradead.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Xiubo Li <xiubli@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
cc: Shyam Prasad N <sprasad@microsoft.com>
cc: Tom Talpey <tom@talpey.com>
cc: Bharath SM <bharathsm@microsoft.com>
cc: Trond Myklebust <trond.myklebust@hammerspace.com>
cc: Anna Schumaker <anna@kernel.org>
cc: netfs@lists.linux.dev
cc: v9fs@lists.linux.dev
cc: linux-afs@lists.infradead.org
cc: ceph-devel@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: linux-nfs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Filesystems should use folio->index and folio->mapping, instead of
folio_index(folio), folio_mapping() and folio_file_mapping() since
they know that it's in the pagecache.
Change this automagically with:
perl -p -i -e 's/folio_mapping[(]([^)]*)[)]/\1->mapping/g' fs/netfs/*.c
perl -p -i -e 's/folio_file_mapping[(]([^)]*)[)]/\1->mapping/g' fs/netfs/*.c
perl -p -i -e 's/folio_index[(]([^)]*)[)]/\1->index/g' fs/netfs/*.c
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-cifs@vger.kernel.org
cc: linux-erofs@lists.ozlabs.org
cc: linux-fsdevel@vger.kernel.org
|
|
Track the file position above which the server is not expected to have any
data (the "zero point") and preemptively assume that we can satisfy
requests by filling them with zeroes locally rather than attempting to
download them if they're over that line - even if we've written data back
to the server. Assume that any data that was written back above that
position is held in the local cache. Note that we have to split requests
that straddle the line.
Make use of this to optimise away some reads from the server. We need to
set the zero point in the following circumstances:
(1) When we see an extant remote inode and have no cache for it, we set
the zero_point to i_size.
(2) On local inode creation, we set zero_point to 0.
(3) On local truncation down, we reduce zero_point to the new i_size if
the new i_size is lower.
(4) On local truncation up, we don't change zero_point.
(5) On local modification, we don't change zero_point.
(6) On remote invalidation, we set zero_point to the new i_size.
(7) If stored data is discarded from the pagecache or culled from fscache,
we must set zero_point above that if the data also got written to the
server.
(8) If dirty data is written back to the server, but not fscache, we must
set zero_point above that.
(9) If a direct I/O write is made, set zero_point above that.
Assuming the above, any read from the server at or above the zero_point
position will return all zeroes.
The zero_point value can be stored in the cache, provided the above rules
are applied to it by any code that culls part of the local cache.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Prepare to use folio->private to hold information write grouping and
streaming write. These are implemented in the same commit as they both
make use of folio->private and will be both checked at the same time in
several places.
"Write grouping" involves ordering the writeback of groups of writes, such
as is needed for ceph snaps. A group is represented by a
filesystem-supplied object which must contain a netfs_group struct. This
contains just a refcount and a pointer to a destructor.
"Streaming write" is the storage of data in folios that are marked dirty,
but not uptodate, to avoid unnecessary reads of data. This is represented
by a netfs_folio struct. This contains the offset and length of the
modified region plus the otherwise displaced write grouping pointer.
The way folio->private is multiplexed is:
(1) If private is NULL then neither is in operation on a dirty folio.
(2) If private is set, with bit 0 clear, then this points to a group.
(3) If private is set, with bit 0 set, then this points to a netfs_folio
struct (with bit 0 AND'ed out).
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Provide tools to create a buffer in an xarray, with a function to add new
folios with a mark. This will be used to create bounce buffer and can be
used more easily to create a list of folios the span of which would require
more than a page's worth of bio_vec structs.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Provide default invalidate_folio and release_folio calls. These will need
to interact with invalidation correctly at some point. They will be needed
if netfslib is to make use of folio->private for its own purposes.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Move the resource pinning-for-writeback from fscache code to netfslib code.
This is used to keep a cache backing object pinned whilst we have dirty
pages on the netfs inode in the pagecache such that VM writeback will be
able to reach it.
Whilst we're at it, switch the parameters of netfs_unpin_writeback() to
match ->write_inode() so that it can be used for that directly.
Note that this mechanism could be more generically useful than that for
network filesystems. Quite often they have to keep around other resources
(e.g. authentication tokens or network connections) until the writeback is
complete.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
