| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull mmap_prepare updates from Christian Brauner:
"Last cycle we introduce f_op->mmap_prepare() in c84bf6dd2b83 ("mm:
introduce new .mmap_prepare() file callback").
This is preferred to the existing f_op->mmap() hook as it does require
a VMA to be established yet, thus allowing the mmap logic to invoke
this hook far, far earlier, prior to inserting a VMA into the virtual
address space, or performing any other heavy handed operations.
This allows for much simpler unwinding on error, and for there to be a
single attempt at merging a VMA rather than having to possibly
reattempt a merge based on potentially altered VMA state.
Far more importantly, it prevents inappropriate manipulation of
incompletely initialised VMA state, which is something that has been
the cause of bugs and complexity in the past.
The intent is to gradually deprecate f_op->mmap, and in that vein this
series coverts the majority of file systems to using f_op->mmap_prepare.
Prerequisite steps are taken - firstly ensuring all checks for mmap
capabilities use the file_has_valid_mmap_hooks() helper rather than
directly checking for f_op->mmap (which is now not a valid check) and
secondly updating daxdev_mapping_supported() to not require a VMA
parameter to allow ext4 and xfs to be converted.
Commit bb666b7c2707 ("mm: add mmap_prepare() compatibility layer for
nested file systems") handles the nasty edge-case of nested file
systems like overlayfs, which introduces a compatibility shim to allow
f_op->mmap_prepare() to be invoked from an f_op->mmap() callback.
This allows for nested filesystems to continue to function correctly
with all file systems regardless of which callback is used. Once we
finally convert all file systems, this shim can be removed.
As a result, ecryptfs, fuse, and overlayfs remain unaltered so they
can nest all other file systems.
We additionally do not update resctl - as this requires an update to
remap_pfn_range() (or an alternative to it) which we defer to a later
series, equally we do not update cramfs which needs a mixed mapping
insertion with the same issue, nor do we update procfs, hugetlbfs,
syfs or kernfs all of which require VMAs for internal state and hooks.
We shall return to all of these later"
* tag 'vfs-6.17-rc1.mmap_prepare' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
doc: update porting, vfs documentation to describe mmap_prepare()
fs: replace mmap hook with .mmap_prepare for simple mappings
fs: convert most other generic_file_*mmap() users to .mmap_prepare()
fs: convert simple use of generic_file_*_mmap() to .mmap_prepare()
mm/filemap: introduce generic_file_*_mmap_prepare() helpers
fs/xfs: transition from deprecated .mmap hook to .mmap_prepare
fs/ext4: transition from deprecated .mmap hook to .mmap_prepare
fs/dax: make it possible to check dev dax support without a VMA
fs: consistently use can_mmap_file() helper
mm/nommu: use file_has_valid_mmap_hooks() helper
mm: rename call_mmap/mmap_prepare to vfs_mmap/mmap_prepare
|
|
Thanks to the meta buffer infrastructure, metadata-compressed inodes are
just read from the metabox inode instead of the blockdevice (or backing
file) inode.
The same is true for shared extended attributes.
When metadata compression is enabled, inode numbers are divided from
on-disk NIDs because of non-LTS 32-bit application compatibility.
Co-developed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Bo Liu (OpenAnolis) <liubo03@inspur.com>
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250722003229.2121752-1-hsiangkao@linux.alibaba.com
|
|
- Avoid calling erofs_map_dev() for unmapped extents;
- Assign `iomap->addr` for inline extents too (since they have physical
location).
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250716092254.3826715-1-hsiangkao@linux.alibaba.com
|
|
- need_kmap is always true except for a ztailpacking case; thus, just
open-code that one;
- The upcoming metadata compression will add a new boolean, so simplify
this first.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20250714090907.4095645-1-hsiangkao@linux.alibaba.com
|
|
Flush the D-cache before unlocking folios for compressed inodes, as
they are dirtied during decompression.
Avoid calling flush_dcache_folio() on every CPU write, since it's more
like playing whack-a-mole without real benefit.
It has no impact on x86 and arm64/risc-v: on x86, flush_dcache_folio()
is a no-op, and on arm64/risc-v, PG_dcache_clean (PG_arch_1) is clear
for new page cache folios. However, certain ARM boards are affected,
as reported.
Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Closes: https://lore.kernel.org/r/c1e51e16-6cc6-49d0-a63e-4e9ff6c4dd53@pengutronix.de
Closes: https://lore.kernel.org/r/38d43fae-1182-4155-9c5b-ffc7382d9917@siemens.com
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
Tested-by: Stefan Kerkmann <s.kerkmann@pengutronix.de>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250709034614.2780117-2-hsiangkao@linux.alibaba.com
|
|
Commit 771c994ea51f ("erofs: convert all uncompressed cases to iomap")
converts to use iomap interface, it removed trace_erofs_readpage()
tracepoint in the meantime, let's add it back.
Fixes: 771c994ea51f ("erofs: convert all uncompressed cases to iomap")
Signed-off-by: Chao Yu <chao@kernel.org>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250708111942.3120926-1-chao@kernel.org
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Commit 771c994ea51f ("erofs: convert all uncompressed cases to iomap")
converts to use iomap interface, it removed trace_erofs_readahead()
tracepoint in the meantime, let's add it back.
Fixes: 771c994ea51f ("erofs: convert all uncompressed cases to iomap")
Signed-off-by: Chao Yu <chao@kernel.org>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250707084832.2725677-1-chao@kernel.org
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Update nearly all generic_file_mmap() and generic_file_readonly_mmap()
callers to use generic_file_mmap_prepare() and
generic_file_readonly_mmap_prepare() respectively.
We update blkdev, 9p, afs, erofs, ext2, nfs, ntfs3, smb, ubifs and vboxsf
file systems this way.
Remaining users we cannot yet update are ecryptfs, fuse and cramfs. The
former two are nested file systems that must support any underlying file
ssytem, and cramfs inserts a mixed mapping which currently requires a VMA.
Once all file systems have been converted to mmap_prepare(), we can then
update nested file systems.
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/08db85970d89b17a995d2cffae96fb4cc462377f.1750099179.git.lorenzo.stoakes@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When attempting to use an archive file, such as APEX on android,
as a file-backed mount source, it fails because EROFS image within
the archive file does not start at offset 0. As a result, a loop
or a dm device is still needed to attach the image file at an
appropriate offset first. Similarly, if an EROFS image within a
block device does not start at offset 0, it cannot be mounted
directly either.
To address this issue, this patch adds a new mount option `fsoffset=x'
to accept a start offset for the primary device. The offset should be
aligned to the block size. EROFS will add this offset before performing
read requests.
Signed-off-by: Sheng Yong <shengyong1@xiaomi.com>
Signed-off-by: Wang Shuai <wangshuai12@xiaomi.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250517090544.2687651-1-shengyong1@xiaomi.com
[ Gao Xiang: minor update on documentation and the error message. ]
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
It adapts the on-disk changes from the previous commit. It also
supports EROFS_NULL_ADDR (all 1's) for EROFS_INODE_FLAT_PLAIN inodes
to indicate 0-filled inodes, as it's common for composefs use cases.
As a result, EROFS_INODE_CHUNK_BASED is no longer needed.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Acked-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20250310095459.2620647-5-hsiangkao@linux.alibaba.com
|
|
The current 32-bit block addressing limits EROFS to a 16TiB maximum
volume size with 4KiB blocks. However, several new use cases now
require larger capacity support:
- Massive datasets for model training in order to boost random
sampling performance for each epoch;
- Object storage clients using EROFS direct passthrough.
This extends core on-disk structures to support 48-bit block addressing,
such as inodes, device slots, and inode chunks.
Additionally:
- Expand superblock root NID to 8-byte `rootnid_8b` to enable full
out-of-place update incremental builds;
- Introduce `epoch` field in the superblock as well as add `mtime`
field to 32-byte compact inodes for basic timestamp support.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Acked-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20250310095459.2620647-4-hsiangkao@linux.alibaba.com
|
|
It's simple enough to be folded into erofs_map_blocks().
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Acked-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20250310095459.2620647-2-hsiangkao@linux.alibaba.com
|
|
Since EROFS_KMAP_ATOMIC is no longer valid, get rid of erofs_kmap_type too.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20250217093141.2659-1-liubo03@inspur.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Record `m_sb` and `m_dif` to replace `m_fscache`, `m_daxdev`, `m_fp`
and `m_dax_part_off` in order to simplify the codebase.
Note that `m_bdev` is still left since it can be assigned from
`sb->s_bdev` directly.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241212235401.2857246-1-hsiangkao@linux.alibaba.com
|
|
Instead of just listing each one directly in `struct erofs_sb_info`
except that we still use `sb->s_bdev` for the primary block device.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241216125310.930933-2-hsiangkao@linux.alibaba.com
|
|
Currently, only filesystems backed by block devices support direct I/O.
Also remove the unnecessary strict checks that can be supported with iomap.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241115074625.2520728-1-hsiangkao@linux.alibaba.com
|
|
After commit 927e5010ff5b ("erofs: use kmap_local_page() only for
erofs_bread()"), `buf->kmap_type` actually has no use at all.
Let's get rid of `buf->kmap_type` now.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241114095813.839866-1-hsiangkao@linux.alibaba.com
|
|
syzbot reported a null-ptr-deref in fuse_read_args_fill:
fuse_read_folio+0xb0/0x100 fs/fuse/file.c:905
filemap_read_folio+0xc6/0x2a0 mm/filemap.c:2367
do_read_cache_folio+0x263/0x5c0 mm/filemap.c:3825
read_mapping_folio include/linux/pagemap.h:1011 [inline]
erofs_bread+0x34d/0x7e0 fs/erofs/data.c:41
erofs_read_superblock fs/erofs/super.c:281 [inline]
erofs_fc_fill_super+0x2b9/0x2500 fs/erofs/super.c:625
Unlike most filesystems, some network filesystems and FUSE need
unavoidable valid `file` pointers for their read I/Os [1].
Anyway, those use cases need to be supported too.
[1] https://docs.kernel.org/filesystems/vfs.html
Reported-by: syzbot+0b1279812c46e48bb0c1@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/6727bbdf.050a0220.3c8d68.0a7e.GAE@google.com
Fixes: fb176750266a ("erofs: add file-backed mount support")
Tested-by: syzbot+0b1279812c46e48bb0c1@syzkaller.appspotmail.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241114234905.1873723-1-hsiangkao@linux.alibaba.com
|
|
Many userspace programs (including erofs-utils itself) use SEEK_DATA /
SEEK_HOLE to parse hole extents in addition to FIEMAP.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241011065128.2097377-1-hsiangkao@linux.alibaba.com
|
|
Get rid of redundant variables (nblocks, offset) and a dead branch
(!tailendpacking).
Signed-off-by: Hongzhen Luo <hongzhen@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20240905030339.1474396-1-hongzhen@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Since EROFS only needs to handle read requests in simple contexts,
Just directly use vfs_iocb_iter_read() for data I/Os.
Reviewed-by: Sandeep Dhavale <dhavale@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240905093031.2745929-1-hsiangkao@linux.alibaba.com
|
|
It actually has been around for years: For containers and other sandbox
use cases, there will be thousands (and even more) of authenticated
(sub)images running on the same host, unlike OS images.
Of course, all scenarios can use the same EROFS on-disk format, but
bdev-backed mounts just work well for OS images since golden data is
dumped into real block devices. However, it's somewhat hard for
container runtimes to manage and isolate so many unnecessary virtual
block devices safely and efficiently [1]: they just look like a burden
to orchestrators and file-backed mounts are preferred indeed. There
were already enough attempts such as Incremental FS, the original
ComposeFS and PuzzleFS acting in the same way for immutable fses. As
for current EROFS users, ComposeFS, containerd and Android APEXs will
be directly benefited from it.
On the other hand, previous experimental feature "erofs over fscache"
was once also intended to provide a similar solution (inspired by
Incremental FS discussion [2]), but the following facts show file-backed
mounts will be a better approach:
- Fscache infrastructure has recently been moved into new Netfslib
which is an unexpected dependency to EROFS really, although it
originally claims "it could be used for caching other things such as
ISO9660 filesystems too." [3]
- It takes an unexpectedly long time to upstream Fscache/Cachefiles
enhancements. For example, the failover feature took more than
one year, and the deamonless feature is still far behind now;
- Ongoing HSM "fanotify pre-content hooks" [4] together with this will
perfectly supersede "erofs over fscache" in a simpler way since
developers (mainly containerd folks) could leverage their existing
caching mechanism entirely in userspace instead of strictly following
the predefined in-kernel caching tree hierarchy.
After "fanotify pre-content hooks" lands upstream to provide the same
functionality, "erofs over fscache" will be removed then (as an EROFS
internal improvement and EROFS will not have to bother with on-demand
fetching and/or caching improvements anymore.)
[1] https://github.com/containers/storage/pull/2039
[2] https://lore.kernel.org/r/CAOQ4uxjbVxnubaPjVaGYiSwoGDTdpWbB=w_AeM6YM=zVixsUfQ@mail.gmail.com
[3] https://docs.kernel.org/filesystems/caching/fscache.html
[4] https://lore.kernel.org/r/cover.1723670362.git.josef@toxicpanda.com
Closes: https://github.com/containers/composefs/issues/144
Reviewed-by: Sandeep Dhavale <dhavale@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240830032840.3783206-1-hsiangkao@linux.alibaba.com
|
|
If the requested page is part of the previous multi-page folio, there
is no need to call read_mapping_folio() again.
Also, get rid of the remaining one of page->index [1] in our codebase.
[1] https://lore.kernel.org/r/Zp8fgUSIBGQ1TN0D@casper.infradead.org
Cc: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240723073024.875290-1-hsiangkao@linux.alibaba.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull more erofs updates from Gao Xiang:
"The main ones are metadata API conversion to byte offsets by Al Viro.
Another patch gets rid of unnecessary memory allocation out of DEFLATE
decompressor. The remaining one is a trivial cleanup.
- Convert metadata APIs to byte offsets
- Avoid allocating DEFLATE streams unnecessarily
- Some erofs_show_options() cleanup"
* tag 'erofs-for-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: avoid allocating DEFLATE streams before mounting
z_erofs_pcluster_begin(): don't bother with rounding position down
erofs: don't round offset down for erofs_read_metabuf()
erofs: don't align offset for erofs_read_metabuf() (simple cases)
erofs: mechanically convert erofs_read_metabuf() to offsets
erofs: clean up erofs_show_options()
|
|
Most of the callers of erofs_read_metabuf() have the following form:
block = erofs_blknr(sb, offset);
off = erofs_blkoff(sb, offset);
p = erofs_read_metabuf(...., erofs_pos(sb, block), ...);
if (IS_ERR(p))
return PTR_ERR(p);
q = p + off;
// no further uses of p, block or off.
The value passed to erofs_read_metabuf() is offset rounded down to block
size, i.e. offset - off. Passing offset as-is would increase the return
value by off in case of success and keep the return value unchanged in
in case of error. In other words, the same could be achieved by
q = erofs_read_metabuf(...., offset, ...);
if (IS_ERR(q))
return PTR_ERR(q);
This commit convert these simple cases.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20240425195915.GD1031757@ZenIV
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
just lift the call of erofs_pos() into the callers; it will
collapse in most of them, but that's better done caller-by-caller.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20240425195846.GC1031757@ZenIV
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Just the low-hanging fruit...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20240411145346.2516848-2-viro@zeniv.linux.org.uk
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
... seeing that ->i_mapping is the only thing we want from the inode.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Callers are happier that way, especially since we no longer need to
play with splitting offset into block number and offset within block,
passing the former to erofs_bread(), then adding the latter...
erofs_bread() always reads entire pages, anyway.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull block handle updates from Christian Brauner:
"Last cycle we changed opening of block devices, and opening a block
device would return a bdev_handle. This allowed us to implement
support for restricting and forbidding writes to mounted block
devices. It was accompanied by converting and adding helpers to
operate on bdev_handles instead of plain block devices.
That was already a good step forward but ultimately it isn't necessary
to have special purpose helpers for opening block devices internally
that return a bdev_handle.
Fundamentally, opening a block device internally should just be
equivalent to opening files. So now all internal opens of block
devices return files just as a userspace open would. Instead of
introducing a separate indirection into bdev_open_by_*() via struct
bdev_handle bdev_file_open_by_*() is made to just return a struct
file. Opening and closing a block device just becomes equivalent to
opening and closing a file.
This all works well because internally we already have a pseudo fs for
block devices and so opening block devices is simple. There's a few
places where we needed to be careful such as during boot when the
kernel is supposed to mount the rootfs directly without init doing it.
Here we need to take care to ensure that we flush out any asynchronous
file close. That's what we already do for opening, unpacking, and
closing the initramfs. So nothing new here.
The equivalence of opening and closing block devices to regular files
is a win in and of itself. But it also has various other advantages.
We can remove struct bdev_handle completely. Various low-level helpers
are now private to the block layer. Other helpers were simply
removable completely.
A follow-up series that is already reviewed build on this and makes it
possible to remove bdev->bd_inode and allows various clean ups of the
buffer head code as well. All places where we stashed a bdev_handle
now just stash a file and use simple accessors to get to the actual
block device which was already the case for bdev_handle"
* tag 'vfs-6.9.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (35 commits)
block: remove bdev_handle completely
block: don't rely on BLK_OPEN_RESTRICT_WRITES when yielding write access
bdev: remove bdev pointer from struct bdev_handle
bdev: make struct bdev_handle private to the block layer
bdev: make bdev_{release, open_by_dev}() private to block layer
bdev: remove bdev_open_by_path()
reiserfs: port block device access to file
ocfs2: port block device access to file
nfs: port block device access to files
jfs: port block device access to file
f2fs: port block device access to files
ext4: port block device access to file
erofs: port device access to file
btrfs: port device access to file
bcachefs: port block device access to file
target: port block device access to file
s390: port block device access to file
nvme: port block device access to file
block2mtd: port device access to files
bcache: port block device access to files
...
|
|
There are mainly two reasons that thp_get_unmapped_area() should be
used for EROFS as other filesystems:
- It's needed to enable PMD mappings as a FSDAX filesystem, see
commit 74d2fad1334d ("thp, dax: add thp_get_unmapped_area for pmd
mappings");
- It's useful together with large folios and
CONFIG_READ_ONLY_THP_FOR_FS which enable THPs for mmapped files
(e.g. shared libraries) even without FSDAX. See commit 1854bc6e2420
("mm/readahead: Align file mappings for non-DAX").
Fixes: 06252e9ce05b ("erofs: dax support for non-tailpacking regular file")
Fixes: ce529cc25b18 ("erofs: enable large folios for iomap mode")
Fixes: e6687b89225e ("erofs: enable large folios for fscache mode")
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240306053138.2240206-1-hsiangkao@linux.alibaba.com
|
|
Link: https://lore.kernel.org/r/20240123-vfs-bdev-file-v2-20-adbd023e19cc@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Avoid NULL dereference of dif->bdev_handle, as dif->bdev_handle is NULL
in fscache mode.
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:erofs_map_dev+0xbd/0x1c0
Call Trace:
<TASK>
erofs_fscache_data_read_slice+0xa7/0x340
erofs_fscache_data_read+0x11/0x30
erofs_fscache_readahead+0xd9/0x100
read_pages+0x47/0x1f0
page_cache_ra_order+0x1e5/0x270
filemap_get_pages+0xf2/0x5f0
filemap_read+0xb8/0x2e0
vfs_read+0x18d/0x2b0
ksys_read+0x53/0xd0
do_syscall_64+0x42/0xf0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Reported-by: Yiqun Leng <yqleng@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7245
Fixes: 49845720080d ("erofs: Convert to use bdev_open_by_path()")
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20231114070704.23398-1-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"Nothing exciting lands for this cycle, since we're still busying in
developing support for sub-page blocks and large-folios of compressed
data for new scenarios on Android.
In this cycle, MicroLZMA format is marked as stable, and there are
minor cleanups around documentation and codebase. In addition, it also
fixes incorrect lockref usage in erofs_insert_workgroup().
Summary:
- Fix inode metadata space layout documentation
- Avoid warning for MicroLZMA format anymore
- Fix erofs_insert_workgroup() lockref usage
- Some cleanups"
* tag 'erofs-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix erofs_insert_workgroup() lockref usage
erofs: tidy up redundant includes
erofs: get rid of ROOT_NID()
erofs: simplify compression configuration parser
erofs: don't warn MicroLZMA format anymore
erofs: fix inode metadata space layout description in documentation
|
|
- Remove unused includes like <linux/parser.h> and <linux/prefetch.h>;
- Move common includes into "internal.h".
Signed-off-by: Ferry Meng <mengferry@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20231026021627.23284-2-mengferry@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Convert erofs to use bdev_open_by_path() and pass the handle around.
CC: Gao Xiang <xiang@kernel.org>
CC: Chao Yu <chao@kernel.org>
CC: linux-erofs@lists.ozlabs.org
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-21-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Remove the unnecessary encoding of page order into an enum and pass the
page order directly. That lets us get rid of pe_order().
The switch constructs have to be changed to if/else constructs to prevent
GCC from warning on builds with 3-level page tables where PMD_ORDER and
PUD_ORDER have the same value.
If you are looking at this commit because your driver stopped compiling,
look at the previous commit as well and audit your driver to be sure it
doesn't depend on mmap_lock being held in its ->huge_fault method.
[willy@infradead.org: use "order %u" to match the (non dev_t) style]
Link: https://lkml.kernel.org/r/ZOUYekbtTv+n8hYf@casper.infradead.org
Link: https://lkml.kernel.org/r/20230818202335.2739663-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Replace pointers to generic_file_splice_read() with calls to
filemap_splice_read().
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: David Hildenbrand <david@redhat.com>
cc: John Hubbard <jhubbard@nvidia.com>
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20230522135018.2742245-29-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
So that erofs_read_metadata() can read metadata from other inodes
(e.g. packed inode) as well.
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Acked-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230407141710.113882-2-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
In order to support mounting multi-blobs container image as a single
block device, add flattened block device feature for EROFS.
In this mode, all meta/data contents will be mapped into one block
space. User could compose a block device(by nbd/ublk/virtio-blk/
vhost-user-blk) from multiple sources and mount the block device by
EROFS directly. It can reduce the number of block devices used, and
it's also benefits in both VM file passthrough and distributed storage
scenarios.
You can test this using the method mentioned by:
https://github.com/dragonflyoss/image-service/pull/1139
1. Compose a (nbd)block device from multi-blobs.
2. Mount EROFS on mntdir/.
3. Compare the md5sum between source dir and mntdir/.
Later, we could also use it to refer original tar blobs.
Signed-off-by: Jia Zhu <zhujia.zj@bytedance.com>
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Acked-by: Chao Yu <chao@kernel.org>
Tested-by: Jiang Liu <gerry@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230302071751.48425-1-zhujia.zj@bytedance.com
[ Gao Xiang: refine commit message and use erofs_pos(). ]
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
As the first step of converting hardcoded blocksize to that specified in
on-disk superblock, convert all call sites of hardcoded blocksize to
sb->s_blocksize except for:
1) use sbi->blkszbits instead of sb->s_blocksize in
erofs_superblock_csum_verify() since sb->s_blocksize has not been
updated with the on-disk blocksize yet when the function is called.
2) use inode->i_blkbits instead of sb->s_blocksize in erofs_bread(),
since the inode operated on may be an anonymous inode in fscache mode.
Currently the anonymous inode is allocated from an anonymous mount
maintained in erofs, while in the near future we may allocate anonymous
inodes from a generic API directly and thus have no access to the
anonymous inode's i_sb. Thus we keep the block size in i_blkbits for
anonymous inodes in fscache mode.
Be noted that this patch only gets rid of the hardcoded blocksize, in
preparation for actually setting the on-disk block size in the following
patch. The hard limit of constraining the block size to PAGE_SIZE still
exists until the next patch.
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230313135309.75269-2-jefflexu@linux.alibaba.com
[ Gao Xiang: fold a patch to fix incorrect truncated offsets. ]
Link: https://lore.kernel.org/r/20230413035734.15457-1-zhujia.zj@bytedance.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
linux/fs.h has a wrapper for this operation.
Signed-off-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230306075527.1338-1-zbestahu@gmail.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
|
|
For erofs_map_blocks() and erofs_map_blocks_flatmode(), the flags
argument is always EROFS_GET_BLOCKS_RAW. Thus remove the unused flags
parameter for these two functions.
Besides EROFS_GET_BLOCKS_RAW is originally introduced for reading
compressed (raw) data for compressed files. However it's never used
actually and let's remove it now.
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230209024825.17335-2-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Actually we could pass in inodes directly to clean up all callers.
Also rename iloc() as erofs_iloc().
Link: https://lore.kernel.org/r/20230114150823.432069-1-xiang@kernel.org
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Replace direct modifications to vma->vm_flags with calls to modifier
functions to be able to track flag changes and to keep vma locking
correctness.
[akpm@linux-foundation.org: fix drivers/misc/open-dice.c, per Hyeonggon Yoo]
Link: https://lkml.kernel.org/r/20230126193752.297968-5-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@google.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Oskolkov <posk@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Convert all mapped erofs_bread() users to use kmap_local_page()
instead of kmap() or kmap_atomic().
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-and-tested-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20221018105313.4940-1-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Enable large folios for iomap mode. Then the readahead routine will
pass down large folios containing multiple pages.
Let's enable this for non-compressed format for now, until the
compression part supports large folios later.
When large folios supported, the iomap routine will allocate iomap_page
for each large folio and thus we need iomap_release_folio() and
iomap_invalidate_folio() to free iomap_page when these folios get
reclaimed or invalidated.
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20221130060455.44532-1-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Fold in erofs_prepare_dio() in order to simplify the code.
Reviewed-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220720082229.12172-1-hsiangkao@linux.alibaba.com
|
|
Pull page cache updates from Matthew Wilcox:
- Appoint myself page cache maintainer
- Fix how scsicam uses the page cache
- Use the memalloc_nofs_save() API to replace AOP_FLAG_NOFS
- Remove the AOP flags entirely
- Remove pagecache_write_begin() and pagecache_write_end()
- Documentation updates
- Convert several address_space operations to use folios:
- is_dirty_writeback
- readpage becomes read_folio
- releasepage becomes release_folio
- freepage becomes free_folio
- Change filler_t to require a struct file pointer be the first
argument like ->read_folio
* tag 'folio-5.19' of git://git.infradead.org/users/willy/pagecache: (107 commits)
nilfs2: Fix some kernel-doc comments
Appoint myself page cache maintainer
fs: Remove aops->freepage
secretmem: Convert to free_folio
nfs: Convert to free_folio
orangefs: Convert to free_folio
fs: Add free_folio address space operation
fs: Convert drop_buffers() to use a folio
fs: Change try_to_free_buffers() to take a folio
jbd2: Convert release_buffer_page() to use a folio
jbd2: Convert jbd2_journal_try_to_free_buffers to take a folio
reiserfs: Convert release_buffer_page() to use a folio
fs: Remove last vestiges of releasepage
ubifs: Convert to release_folio
reiserfs: Convert to release_folio
orangefs: Convert to release_folio
ocfs2: Convert to release_folio
nilfs2: Remove comment about releasepage
nfs: Convert to release_folio
jfs: Convert to release_folio
...
|
