| Age | Commit message (Collapse) | Author |
|---|
|
So far we've been deriving the buffer tree index using the sector size.
But each extent buffer covers multiple sectors. This makes the buffer
tree rather sparse.
For example the typical and quite common configuration uses sector size
of 4KiB and node size of 16KiB. In this case it means the buffer tree is
using up to the maximum of 25% of it's slots. Or in other words at least
75% of the tree slots are wasted as never used.
We can score significant memory savings on the required tree nodes by
indexing the tree using the node size instead. As a result far less
slots are wasted and the tree can now use up to all 100% of it's slots
this way.
Note: This works even with unaligned tree blocks as we can still get
unique index by doing eb->start >> nodesize_shift.
Getting some stats from running fio write test, there is a bit of
variance. The values presented in the table below are medians from 5
test runs. The numbers are:
- # of allocated ebs in the tree
- # of leaf tree nodes
- highest index in the tree (radix tree width)):
ebs / leaves / Index | bare for-next | with fix
---------------------+--------------------+-------------------
post mount | 16 / 11 / 10e5c | 16 / 10 / 4240
post test | 5810 / 891 / 11cfc | 4420 / 252 / 473a
post rm | 574 / 300 / 10ef0 | 540 / 163 / 46e9
In this case (10GiB filesystem) the height of the tree is still 3 levels
but the 4x width reduction is clearly visible as expected. But since the
tree is more dense we can see the 54-72% reduction of leaf nodes. That's
very close to ideal with this test. It means the tree is getting really
dense with this kind of workload.
Also, the fio results show no performance change.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The file system type is not a very useful holder as it doesn't allow us
to go back to the actual file system instance. Pass the super_block
instead which is useful when passed back to the file system driver.
This matches what is done for all other block device based file systems,
and allows us to remove btrfs_fs_info::bdev_holder completely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
It's not used anymore after commit 091344508249 ("btrfs: qgroup: use
qgroup_iterator in qgroup_convert_meta()"), so remove it.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When debugging/detecting outlier commit stalls, having an indicator that
we are currently in a long commit critical section can be very useful.
Extend the commit_stats sysfs file to also include the current commit
critical section duration.
Since this requires storing the last commit start time, use that rather
than a separate stack variable for storing the finished commit durations
as well.
This also requires slightly moving up the timing of the stats updating
to *inside* the critical section to avoid the transaction T+1 setting
the critical_section_start_time to 0 before transaction T can update its
stats, which would trigger the new ASSERT. This is an improvement in and
of itself, as it makes the stats more accurately represent the true
critical section time. It may be yet better to pull the stats up to where
start_transaction gets unblocked, rather than the next commit, but this
seems like a good enough place as well.
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We need to add a dedicated block_rsv for tree-log, because the block_rsv
serves for a tree node allocation in btrfs_alloc_tree_block(). Currently,
tree-log tree uses fs_info->empty_block_rsv, which is shared across trees
and points to the normal metadata space_info. Instead, we add a dedicated
block_rsv and that block_rsv can use the dedicated sub-space_info.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In order to fully utilize xarray tagging to improve writeback we need to
convert the buffer_radix to a proper xarray. This conversion is
relatively straightforward as the radix code uses the xarray underneath.
Using xarray directly allows for quite a lot less code.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The Btrfs documentation states that if the commit value is greater than
300 a warning should be issued. The warning was accidentally lost in the
new mount API update.
Fixes: 6941823cc878 ("btrfs: remove old mount API code")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Kyoji Ogasawara <sawara04.o@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since I have triggered the ASSERT() on the delayed iput too many times,
now is the time to add some extra debug warnings for delayed iput.
All delayed iputs should be queued after all ordered extents finish
their IO and all involved workqueues are flushed.
Thus after the btrfs_run_delayed_iputs() inside close_ctree(), there
should be no more delayed puts added.
So introduce a new BTRFS_FS_STATE_NO_DELAYED_IPUT, set after the above
mentioned timing. And all btrfs_add_delayed_iput() will check that flag
and give a WARN_ON_ONCE().
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The zstd and zlib compression types support setting compression levels.
Enhance the defrag interface to specify the levels as well. For zstd the
negative (realtime) levels are also accepted.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently we only support two block sizes, 4K and PAGE_SIZE.
This means on the most common architecture x86_64, we have no way to
test subpage block size. And that's exactly I have an aarch64 machine
dedicated for subpage tests.
But this is still a hurdle for a lot of btrfs developers, and to improve
the test coverage mostly on x86_64, here we enable debug builds to
accept 2K block size.
This involves:
- Introduce a dedicated minimal block size macro
BTRFS_MIN_BLOCKSIZE, which depends on if CONFIG_BTRFS_DEBUG is set.
If so it's 2K, otherwise it's 4K as usual.
- Allow 4K, PAGE_SIZE and BTRFS_MIN_BLOCKSIZE as block size
- Update subpage block size checks to be based on BTRFS_MIN_BLOCKSIZE
- Export the new supported blocksize through sysfs interfaces
As most of the subpage support is already pretty mature, there is no
extra work needed to support the extra 2K block size.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
For the future large folio support, our filemap can have folios with
different sizes, thus we can no longer rely on a fixed blocks_per_page
value.
To prepare for that future, here we do:
- Remove btrfs_fs_info::sectors_per_page
- Introduce a helper, btrfs_blocks_per_folio()
Which uses the folio size to calculate the number of blocks for each
folio.
- Migrate the existing btrfs_fs_info::sectors_per_page to use that
helper
There are some exceptions:
* Metadata nodesize < page size support
In the future, even if we support large folios, we will only
allocate a folio that matches our nodesize.
Thus we won't have a folio covering multiple metadata unless
nodesize < page size.
* Existing subpage bitmap dump
We use a single unsigned long to store the bitmap.
That means until we change the bitmap dumping code, our upper limit
for folio size will only be 256K (4K block size, 64 bit unsigned
long).
* btrfs_is_subpage() check
This will be migrated into a future patch.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Allow using the fast modes (negative compression levels) of zstd as a
mount option.
As per the results, the compression ratio is (expectedly) lower:
for level in {-15..-1} 1 2 3; \
do printf "level %3d\n" $level; \
mount -o compress=zstd:$level /dev/sdb /mnt/test/; \
grep sdb /proc/mounts; \
cp -r /usr/bin /mnt/test/; sync; compsize /mnt/test/bin; \
cp -r /usr/share/doc /mnt/test/; sync; compsize /mnt/test/doc; \
cp enwik9 /mnt/test/; sync; compsize /mnt/test/enwik9; \
cp linux-6.13.tar /mnt/test/; sync; compsize /mnt/test/linux-6.13.tar; \
rm -r /mnt/test/{bin,doc,enwik9,linux-6.13.tar}; \
umount /mnt/test/; \
done |& tee results | \
awk '/^level/{print}/^TOTAL/{print$3"\t"$2" |"}' | paste - - - - -
266M bin | 45M doc | 953M wiki | 1.4G source
=============================+===============+===============+===============+
level -15 180M 67% | 30M 68% | 694M 72% | 598M 40% |
level -14 180M 67% | 30M 67% | 683M 71% | 581M 39% |
level -13 177M 66% | 29M 66% | 671M 70% | 566M 38% |
level -12 174M 65% | 29M 65% | 658M 69% | 548M 37% |
level -11 174M 65% | 28M 64% | 645M 67% | 530M 35% |
level -10 171M 64% | 28M 62% | 631M 66% | 512M 34% |
level -9 165M 62% | 27M 61% | 615M 64% | 493M 33% |
level -8 161M 60% | 27M 59% | 598M 62% | 475M 32% |
level -7 155M 58% | 26M 58% | 582M 61% | 457M 30% |
level -6 151M 56% | 25M 56% | 565M 59% | 437M 29% |
level -5 145M 54% | 24M 55% | 545M 57% | 417M 28% |
level -4 139M 52% | 23M 52% | 520M 54% | 391M 26% |
level -3 135M 50% | 22M 50% | 495M 51% | 369M 24% |
level -2 127M 47% | 22M 48% | 470M 49% | 349M 23% |
level -1 120M 45% | 21M 47% | 452M 47% | 332M 22% |
level 1 110M 41% | 17M 39% | 362M 38% | 290M 19% |
level 2 106M 40% | 17M 38% | 349M 36% | 288M 19% |
level 3 104M 39% | 16M 37% | 340M 35% | 276M 18% |
The samples represent some data sets that can be commonly found and show
approximate compressibility. The fast levels trade off speed for ratio
and are best suitable for highly compressible data.
As can be seen above, comparing the results to the current default zstd
level 3, the negative levels are roughly 2x worse at -15 and the
ratio increases almost linearly with each level.
Signed-off-by: Daniel Vacek <neelx@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Track number of read blocks in the whole filesystem. The counter is
initialized when devices are opened. The counter is increased at
btrfs_submit_dev_bio() if the stats tracking is enabled (depends on the
read policy). Stats tracking is disabled by default and is enabled
through fs_devices::collect_fs_stats when required.
The code is not under the EXPERIMENTAL define, as stats can be expanded
to include write counts and other performance counters, with the user
interface independent of its internal use.
This is an in-memory-only feature, not related to the dev error stats.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The header clearly states that it does not want to be included directly,
only via linux/spinlock_types.h. Drop this as we can simply use the
spinlock.h which is already included.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At btrfs_is_empty_uuid() we have our custom code to check if an uuid is
empty, however there a kernel uuid library that has a function named
uuid_is_null() which does the same and probably more efficient.
So change btrfs_is_empty_uuid() to use uuid_is_null(), which is almost
a directly replacement, it just wraps the necessary casting since our
uuid types are u8 arrays while the uuid kernel library uses the uuid_t
type, which is just a typedef of an u8 array of 16 elements as well.
Also since the function is now to trivial, make it a static inline
function in fs.h.
Suggested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently btrfs_alloc_write_mask() is defined in ctree.h but it's not
related at all to the btree data structure, so move it into fs.h.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently BTRFS_BYTES_TO_BLKS() is defined in ctree.h but it's not related
at all to the btree data structure, so move it into fs.h.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The folio ordered helper macros are defined at ctree.h but this is not
the best place since ctree.{h,c} is all about the btree data structure
implementation and not a generic module. So move these macros into the
fs.h header.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
It's a generic helper not specific to ioctls and used in several places,
so move it out from ioctl.c and into fs.c. While at it change its return
type from int to bool and declare the loop variable in the loop itself.
This also slightly reduces the module's size.
Before this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1781492 161037 16920 1959449 1de619 fs/btrfs/btrfs.ko
After this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1781340 161037 16920 1959297 1de581 fs/btrfs/btrfs.ko
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The ctree module is about the implementation of the btree data structure
and not a place holder for generic filesystem things like the csum
algorithm details. Move the functions related to the csum algorithm
details away from ctree.c and into fs.c, which is a far better place for
them. Also fix missing punctuation in comments and change one multiline
comment to a single line comment since everything fits in under 80
characters.
For some reason this also slightly reduces the module's size.
Before this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1782126 161045 16920 1960091 1de89b fs/btrfs/btrfs.ko
After this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1782094 161045 16920 1960059 1de87b fs/btrfs/btrfs.ko
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The names for the members of struct btrfs_fs_info related to the extent
map shrinker are a bit too long, so rename them to be shorter by replacing
the "extent_map_" prefix with the "em_" prefix.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that the extent map shrinker can only be run by a single task (as a
work queue item) there is no need to keep the progress of the shrinker
protected by a spinlock and passing the progress to trace events as
parameters. So remove the lock and simplify the arguments for the trace
events.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently the extent map shrinker is run synchronously for kswapd tasks
that end up calling the fs shrinker (fs/super.c:super_cache_scan()).
This has some disadvantages and for some heavy workloads with memory
pressure it can cause some delays and stalls that make a machine
unresponsive for some periods. This happens because:
1) We can have several kswapd tasks on machines with multiple NUMA zones,
and running the extent map shrinker concurrently can cause high
contention on some spin locks, namely the spin locks that protect
the radix tree that tracks roots, the per root xarray that tracks
open inodes and the list of delayed iputs. This not only delays the
shrinker but also causes high CPU consumption and makes the task
running the shrinker monopolize a core, resulting in the symptoms
of an unresponsive system. This was noted in previous commits such as
commit ae1e766f623f ("btrfs: only run the extent map shrinker from
kswapd tasks");
2) The extent map shrinker's iteration over inodes can often be slow, even
after changing the data structure that tracks open inodes for a root
from a red black tree (up to kernel 6.10) to an xarray (kernel 6.10+).
The transition to the xarray while it made things a bit faster, it's
still somewhat slow - for example in a test scenario with 10000 inodes
that have no extent maps loaded, the extent map shrinker took between
5ms to 8ms, using a release, non-debug kernel. Iterating over the
extent maps of an inode can also be slow if have an inode with many
thousands of extent maps, since we use a red black tree to track and
search extent maps. So having the extent map shrinker run synchronously
adds extra delay for other things a kswapd task does.
So make the extent map shrinker run asynchronously as a job for the
system unbounded workqueue, just like what we do for data and metadata
space reclaim jobs.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This macro is no longer used after the "btrfs: Cleaned up folio->page
conversion" series patch [1] was applied, so remove it.
[1]: https://patchwork.kernel.org/project/linux-btrfs/cover/20240828182908.3735344-1-lizetao1@huawei.com/
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently CONFIG_BTRFS_EXPERIMENTAL is not only for the extra debugging
output, but also for experimental features.
This is not ideal to distinguish planned but not yet stable features
from those purely designed for debugging.
This patch splits the following features into CONFIG_BTRFS_EXPERIMENTAL:
- Extent map shrinker
This seems to be the first one to exit experimental.
- Extent tree v2
This seems to be the last one to graduate from experimental.
- Raid stripe tree
- Csum offload mode
- Send protocol v3
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Running fstests btrfs/011 with MKFS_OPTIONS="-O rst" to force the usage of
the RAID stripe-tree, we get the following splat from lockdep:
BTRFS info (device sdd): dev_replace from /dev/sdd (devid 1) to /dev/sdb started
============================================
WARNING: possible recursive locking detected
6.11.0-rc3-btrfs-for-next #599 Not tainted
--------------------------------------------
btrfs/2326 is trying to acquire lock:
ffff88810f215c98 (&fs_info->dev_replace.rwsem){++++}-{3:3}, at: btrfs_map_block+0x39f/0x2250
but task is already holding lock:
ffff88810f215c98 (&fs_info->dev_replace.rwsem){++++}-{3:3}, at: btrfs_map_block+0x39f/0x2250
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&fs_info->dev_replace.rwsem);
lock(&fs_info->dev_replace.rwsem);
*** DEADLOCK ***
May be due to missing lock nesting notation
1 lock held by btrfs/2326:
#0: ffff88810f215c98 (&fs_info->dev_replace.rwsem){++++}-{3:3}, at: btrfs_map_block+0x39f/0x2250
stack backtrace:
CPU: 1 UID: 0 PID: 2326 Comm: btrfs Not tainted 6.11.0-rc3-btrfs-for-next #599
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x80
__lock_acquire+0x2798/0x69d0
? __pfx___lock_acquire+0x10/0x10
? __pfx___lock_acquire+0x10/0x10
lock_acquire+0x19d/0x4a0
? btrfs_map_block+0x39f/0x2250
? __pfx_lock_acquire+0x10/0x10
? find_held_lock+0x2d/0x110
? lock_is_held_type+0x8f/0x100
down_read+0x8e/0x440
? btrfs_map_block+0x39f/0x2250
? __pfx_down_read+0x10/0x10
? do_raw_read_unlock+0x44/0x70
? _raw_read_unlock+0x23/0x40
btrfs_map_block+0x39f/0x2250
? btrfs_dev_replace_by_ioctl+0xd69/0x1d00
? btrfs_bio_counter_inc_blocked+0xd9/0x2e0
? __kasan_slab_alloc+0x6e/0x70
? __pfx_btrfs_map_block+0x10/0x10
? __pfx_btrfs_bio_counter_inc_blocked+0x10/0x10
? kmem_cache_alloc_noprof+0x1f2/0x300
? mempool_alloc_noprof+0xed/0x2b0
btrfs_submit_chunk+0x28d/0x17e0
? __pfx_btrfs_submit_chunk+0x10/0x10
? bvec_alloc+0xd7/0x1b0
? bio_add_folio+0x171/0x270
? __pfx_bio_add_folio+0x10/0x10
? __kasan_check_read+0x20/0x20
btrfs_submit_bio+0x37/0x80
read_extent_buffer_pages+0x3df/0x6c0
btrfs_read_extent_buffer+0x13e/0x5f0
read_tree_block+0x81/0xe0
read_block_for_search+0x4bd/0x7a0
? __pfx_read_block_for_search+0x10/0x10
btrfs_search_slot+0x78d/0x2720
? __pfx_btrfs_search_slot+0x10/0x10
? lock_is_held_type+0x8f/0x100
? kasan_save_track+0x14/0x30
? __kasan_slab_alloc+0x6e/0x70
? kmem_cache_alloc_noprof+0x1f2/0x300
btrfs_get_raid_extent_offset+0x181/0x820
? __pfx_lock_acquire+0x10/0x10
? __pfx_btrfs_get_raid_extent_offset+0x10/0x10
? down_read+0x194/0x440
? __pfx_down_read+0x10/0x10
? do_raw_read_unlock+0x44/0x70
? _raw_read_unlock+0x23/0x40
btrfs_map_block+0x5b5/0x2250
? __pfx_btrfs_map_block+0x10/0x10
scrub_submit_initial_read+0x8fe/0x11b0
? __pfx_scrub_submit_initial_read+0x10/0x10
submit_initial_group_read+0x161/0x3a0
? lock_release+0x20e/0x710
? __pfx_submit_initial_group_read+0x10/0x10
? __pfx_lock_release+0x10/0x10
scrub_simple_mirror.isra.0+0x3eb/0x580
scrub_stripe+0xe4d/0x1440
? lock_release+0x20e/0x710
? __pfx_scrub_stripe+0x10/0x10
? __pfx_lock_release+0x10/0x10
? do_raw_read_unlock+0x44/0x70
? _raw_read_unlock+0x23/0x40
scrub_chunk+0x257/0x4a0
scrub_enumerate_chunks+0x64c/0xf70
? __mutex_unlock_slowpath+0x147/0x5f0
? __pfx_scrub_enumerate_chunks+0x10/0x10
? bit_wait_timeout+0xb0/0x170
? __up_read+0x189/0x700
? scrub_workers_get+0x231/0x300
? up_write+0x490/0x4f0
btrfs_scrub_dev+0x52e/0xcd0
? create_pending_snapshots+0x230/0x250
? __pfx_btrfs_scrub_dev+0x10/0x10
btrfs_dev_replace_by_ioctl+0xd69/0x1d00
? lock_acquire+0x19d/0x4a0
? __pfx_btrfs_dev_replace_by_ioctl+0x10/0x10
? lock_release+0x20e/0x710
? btrfs_ioctl+0xa09/0x74f0
? __pfx_lock_release+0x10/0x10
? do_raw_spin_lock+0x11e/0x240
? __pfx_do_raw_spin_lock+0x10/0x10
btrfs_ioctl+0xa14/0x74f0
? lock_acquire+0x19d/0x4a0
? find_held_lock+0x2d/0x110
? __pfx_btrfs_ioctl+0x10/0x10
? lock_release+0x20e/0x710
? do_sigaction+0x3f0/0x860
? __pfx_do_vfs_ioctl+0x10/0x10
? do_raw_spin_lock+0x11e/0x240
? lockdep_hardirqs_on_prepare+0x270/0x3e0
? _raw_spin_unlock_irq+0x28/0x50
? do_sigaction+0x3f0/0x860
? __pfx_do_sigaction+0x10/0x10
? __x64_sys_rt_sigaction+0x18e/0x1e0
? __pfx___x64_sys_rt_sigaction+0x10/0x10
? __x64_sys_close+0x7c/0xd0
__x64_sys_ioctl+0x137/0x190
do_syscall_64+0x71/0x140
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f0bd1114f9b
Code: Unable to access opcode bytes at 0x7f0bd1114f71.
RSP: 002b:00007ffc8a8c3130 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f0bd1114f9b
RDX: 00007ffc8a8c35e0 RSI: 00000000ca289435 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000007
R10: 0000000000000008 R11: 0000000000000246 R12: 00007ffc8a8c6c85
R13: 00000000398e72a0 R14: 0000000000004361 R15: 0000000000000004
</TASK>
This happens because on RAID stripe-tree filesystems we recurse back into
btrfs_map_block() on scrub to perform the logical to device physical
mapping.
But as the device replace task is already holding the dev_replace::rwsem
we deadlock.
So don't take the dev_replace::rwsem in case our task is the task performing
the device replace.
Suggested-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The member btrfs_fs_info::subpage_info stores the cached bitmap start
position inside the merged bitmap.
However in reality there is only one thing depending on the sectorsize,
bitmap_nr_bits, which records the number of sectors that fit inside a
page.
The sequence of sub-bitmaps have fixed order, thus it's just a quick
multiplication to calculate the start position of each sub-bitmaps.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"A fix for build breakage on 32bit platforms"
* tag 'for-6.11-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: change BTRFS_MOUNT_* flags to 64bit type
|
|
Currently the BTRFS_MOUNT_* flags are already beyond 32 bits, this is
going to cause compilation errors for some 32 bit systems, as their
unsigned long is only 32 bits long, thus flag
BTRFS_MOUNT_IGNORESUPERFLAGS overflows and can lead to errors.
Fix the problem by:
- Migrate all existing BTRFS_MOUNT_* flags to unsigned long long
- Migrate all mount option related variables to unsigned long long
* btrfs_fs_info::mount_opt
* btrfs_fs_context::mount_opt
* mount_opt parameter of btrfs_check_options()
* old_opts parameter of btrfs_remount_begin()
* old_opts parameter of btrfs_remount_cleanup()
* mount_opt parameter of btrfs_check_mountopts_zoned()
* mount_opt and opt parameters of check_ro_option()
Fixes: 32e6216512b4 ("btrfs: introduce new "rescue=ignoresuperflags" mount option")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"The highlights are new logic behind background block group reclaim,
automatic removal of qgroup after removing a subvolume and new
'rescue=' mount options.
The rest is optimizations, cleanups and refactoring.
User visible features:
- dynamic block group reclaim:
- tunable framework to avoid situations where eager data
allocations prevent creating new metadata chunks due to lack of
unallocated space
- reuse sysfs knob bg_reclaim_threshold (otherwise used only in
zoned mode) for a fixed value threshold
- new on/off sysfs knob "dynamic_reclaim" calculating the value
based on heuristics, aiming to keep spare working space for
relocating chunks but not to needlessly relocate partially
utilized block groups or reclaim newly allocated ones
- stats are exported in sysfs per block group type, files
"reclaim_*"
- this may increase IO load at unexpected times but the corner
case of no allocatable block groups is known to be worse
- automatically remove qgroup of deleted subvolumes:
- adjust qgroup removal conditions, make sure all related
subvolume data are already removed, or return EBUSY, also take
into account setting of sysfs drop_subtree_threshold
- also works in squota mode
- mount option updates: new modes of 'rescue=' that allow to mount
images (read-only) that could have been partially converted by user
space tools
- ignoremetacsums - invalid metadata checksums are ignored
- ignoresuperflags - super block flags that track conversion in
progress (like UUID or checksums)
Core:
- size of struct btrfs_inode is now below 1024 (on a release config),
improved memory packing and other secondary effects
- switch tracking of open inodes from rb-tree to xarray, minor
performance improvement
- reduce number of empty transaction commits when there are no dirty
data/metadata
- memory allocation optimizations (reduced numbers, reordering out of
critical sections)
- extent map structure optimizations and refactoring, more sanity
checks
- more subpage in zoned mode preparations or fixes
- general snapshot code cleanups, improvements and documentation
- tree-checker updates: more file extent ram_bytes fixes, continued
- raid-stripe-tree update (not backward compatible):
- remove extent encoding field from the structure, can be inferred
from other information
- requires btrfs-progs 6.9.1 or newer
- cleanups and refactoring
- error message updates
- error handling improvements
- return type and parameter cleanups and improvements"
* tag 'for-6.11-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (152 commits)
btrfs: fix extent map use-after-free when adding pages to compressed bio
btrfs: fix bitmap leak when loading free space cache on duplicate entry
btrfs: remove the BUG_ON() inside extent_range_clear_dirty_for_io()
btrfs: move extent_range_clear_dirty_for_io() into inode.c
btrfs: enhance compression error messages
btrfs: fix data race when accessing the last_trans field of a root
btrfs: rename the extra_gfp parameter of btrfs_alloc_page_array()
btrfs: remove the extra_gfp parameter from btrfs_alloc_folio_array()
btrfs: introduce new "rescue=ignoresuperflags" mount option
btrfs: introduce new "rescue=ignoremetacsums" mount option
btrfs: output the unrecognized super block flags as hex
btrfs: remove unused Opt enums
btrfs: tree-checker: add extra ram_bytes and disk_num_bytes check
btrfs: fix the ram_bytes assignment for truncated ordered extents
btrfs: make validate_extent_map() catch ram_bytes mismatch
btrfs: ignore incorrect btrfs_file_extent_item::ram_bytes
btrfs: cleanup the bytenr usage inside btrfs_extent_item_to_extent_map()
btrfs: fix typo in error message in btrfs_validate_super()
btrfs: move the direct IO code into its own file
btrfs: pass a btrfs_inode to btrfs_set_prop()
...
|
|
We store the progress (root and inode numbers) of the extent map shrinker
in fs_info without any synchronization but we can have multiple tasks
calling into the shrinker during memory allocations when there's enough
memory pressure for example.
This can result in a task A reading fs_info->extent_map_shrinker_last_ino
after another task B updates it, and task A reading
fs_info->extent_map_shrinker_last_root before task B updates it, making
task A see an odd state that isn't necessarily harmful but may make it
skip certain inode ranges or do more work than necessary by going over
the same inodes again. These unprotected accesses would also trigger
warnings from tools like KCSAN.
So add a lock to protect access to these progress fields.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This new mount option allows the kernel to skip the super flags check,
it's mostly to allow the kernel to do a rescue mount of an interrupted
checksum conversion.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Introduce "rescue=ignoremetacsums" to ignore metadata csums, all the
other metadata sanity checks are still kept as is.
This new mount option is mostly to allow the kernel to mount an
interrupted checksum conversion (at the metadata csum overwrite stage).
And since the main part of metadata sanity checks is inside
tree-checker, we shouldn't lose much safety, and the new mount option is
rescue mount option it requires full read-only mount.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can add const to many parameters, this is for clarity and minor
addition to safety. There are some minor effects, in the assembly
code and .ko measured on release config. This patch does not cover all
possible conversions.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have several headers that are including themselves, triggering clangd
warnings.
Such includes are caused by commit 602035d7fecf ("btrfs: add forward
declarations and headers, part 2").
Just remove such unnecessary include.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Remove duplicate included header file linux/blkdev.h .
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Extent maps are used either to represent existing file extent items, or to
represent new extents that are going to be written and the respective file
extent items are created when the ordered extent completes.
We currently don't have any limit for how many extent maps we can have,
neither per inode nor globally. Most of the time this not too noticeable
because extent maps are removed in the following situations:
1) When evicting an inode;
2) When releasing folios (pages) through the btrfs_release_folio() address
space operation callback.
However we won't release extent maps in the folio range if the folio is
either dirty or under writeback or if the inode's i_size is less than
or equals to 16M (see try_release_extent_mapping(). This 16M i_size
constraint was added back in 2008 with commit 70dec8079d78 ("Btrfs:
extent_io and extent_state optimizations"), but there's no explanation
about why we have it or why the 16M value.
This means that for buffered IO we can reach an OOM situation due to too
many extent maps if either of the following happens:
1) There's a set of tasks constantly doing IO on many files with a size
not larger than 16M, specially if they keep the files open for very
long periods, therefore preventing inode eviction.
This requires a really high number of such files, and having many non
mergeable extent maps (due to random 4K writes for example) and a
machine with very little memory;
2) There's a set tasks constantly doing random write IO (therefore
creating many non mergeable extent maps) on files and keeping them
open for long periods of time, so inode eviction doesn't happen and
there's always a lot of dirty pages or pages under writeback,
preventing btrfs_release_folio() from releasing the respective extent
maps.
This second case was actually reported in the thread pointed by the Link
tag below, and it requires a very large file under heavy IO and a machine
with very little amount of RAM, which is probably hard to happen in
practice in a real world use case.
However when using direct IO this is not so hard to happen, because the
page cache is not used, and therefore btrfs_release_folio() is never
called. Which means extent maps are dropped only when evicting the inode,
and that means that if we have tasks that keep a file descriptor open and
keep doing IO on a very large file (or files), we can exhaust memory due
to an unbounded amount of extent maps. This is especially easy to happen
if we have a huge file with millions of small extents and their extent
maps are not mergeable (non contiguous offsets and disk locations).
This was reported in that thread with the following fio test:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdj
MNT=/mnt/sdj
MOUNT_OPTIONS="-o ssd"
MKFS_OPTIONS=""
cat <<EOF > /tmp/fio-job.ini
[global]
name=fio-rand-write
filename=$MNT/fio-rand-write
rw=randwrite
bs=4K
direct=1
numjobs=16
fallocate=none
time_based
runtime=90000
[file1]
size=300G
ioengine=libaio
iodepth=16
EOF
umount $MNT &> /dev/null
mkfs.btrfs -f $MKFS_OPTIONS $DEV
mount $MOUNT_OPTIONS $DEV $MNT
fio /tmp/fio-job.ini
umount $MNT
Monitoring the btrfs_extent_map slab while running the test with:
$ watch -d -n 1 'cat /sys/kernel/slab/btrfs_extent_map/objects \
/sys/kernel/slab/btrfs_extent_map/total_objects'
Shows the number of active and total extent maps skyrocketing to tens of
millions, and on systems with a short amount of memory it's easy and quick
to get into an OOM situation, as reported in that thread.
So to avoid this issue add a shrinker that will remove extents maps, as
long as they are not pinned, and takes proper care with any concurrent
fsync to avoid missing extents (setting the full sync flag while in the
middle of a fast fsync). This shrinker is triggered through the callbacks
nr_cached_objects and free_cached_objects of struct super_operations.
The shrinker will iterate over all roots and over all inodes of each
root, and keeps track of the last scanned root and inode, so that the
next time it runs, it starts from that root and from the next inode.
This is similar to what xfs does for its inode reclaim (implements those
callbacks, and cycles through inodes by starting from where it ended
last time).
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add a per cpu counter that tracks the total number of extent maps that are
in extent trees of inodes that belong to fs trees. This is going to be
used in an upcoming change that adds a shrinker for extent maps. Only
extent maps for fs trees are considered, because for special trees such as
the data relocation tree we don't want to evict their extent maps which
are critical for the relocation to work, and since those are limited, it's
not a concern to have them in memory during the relocation of a block
group. Another case are extent maps for free space cache inodes, which
must always remain in memory, but those are limited (there's only one per
free space cache inode, which means one per block group).
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The validation of vol args name in several ioctls is not done properly.
a terminating NUL is written to the end of the buffer unconditionally,
assuming that this would be the last place in case the buffer is used
completely. This does not communicate back the actual error (either an
invalid or too long path).
Factor out all such cases and use a helper to do the verification,
simply look for NUL in the buffer. There's no expected practical change,
the size of buffer is 4088, this is enough for most paths or names.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Do a cleanup in the rest of the headers:
- add forward declarations for types referenced by pointers
- add includes when types need them
This fixes potential compilation problems if the headers are reordered
or the missing includes are not provided indirectly.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add a convenience helper to get a fs_info from a VFS inode pointer
instead of open coding the chain or using btrfs_sb() that in some cases
does one more pointer hop. This is implemented as a macro (still with
type checking) so we don't need full definitions of struct btrfs_inode,
btrfs_root or btrfs_fs_info.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add convenience helpers to get a fs_info from a page or folio pointer
instead of open coding the chain or using btrfs_sb() that in some cases
does one more pointer hop. This is implemented as a macro (still with
type checking) so we don't need full definitions of struct page, folio,
btrfs_root and btrfs_fs_info. The latter can't be static inlines as this
would create loop between ctree.h <-> fs.h, or the headers would have to
be restructured.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add convenience helpers to get a struct btrfs_inode from a page or folio
pointer instead of open coding the chain or intermediate BTRFS_I. This
is implemented as a macro (still with type checking) so we don't need
full definitions of struct page or address_space.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add some comments to struct btrfs_fs_info to explicitly document which
members are protected by the spinlock unused_bgs_lock. It is currently
used to protect two linked lists, the reclaim_bgs and unused_bgs lists.
So add an explicit comment on top of each list to mention its protected
by unused_bgs_lock, as well as comment on top of unused_bgs_lock to
mention the lists it protects.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
With help of neovim, LSP and clangd we can identify header files that
are not actually needed to be included in the .c files. This is focused
only on removal (with minor fixups), further cleanups are possible but
will require doing the header files properly with forward declarations,
minimized includes and include-what-you-use care.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we've switched to the new mount API, remove the old stuff.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
With the old mount API we'd pre-populate the mount options with the
space cache settings of the file system, and then the user toggled them
on or off with the mount options. When we switch to the new mount API
the mount options will be set before we get into opening the file
system, so we need a flag to indicate that the user explicitly asked for
-o nospace_cache so we can make the appropriate changes after the fact.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently we abuse the extent_map structure for two purposes:
1) To actually represent extents for inodes;
2) To represent chunk mappings.
This is odd and has several disadvantages:
1) To create a chunk map, we need to do two memory allocations: one for
an extent_map structure and another one for a map_lookup structure, so
more potential for an allocation failure and more complicated code to
manage and link two structures;
2) For a chunk map we actually only use 3 fields (24 bytes) of the
respective extent map structure: the 'start' field to have the logical
start address of the chunk, the 'len' field to have the chunk's size,
and the 'orig_block_len' field to contain the chunk's stripe size.
Besides wasting a memory, it's also odd and not intuitive at all to
have the stripe size in a field named 'orig_block_len'.
We are also using 'block_len' of the extent_map structure to contain
the chunk size, so we have 2 fields for the same value, 'len' and
'block_len', which is pointless;
3) When an extent map is associated to a chunk mapping, we set the bit
EXTENT_FLAG_FS_MAPPING on its flags and then make its member named
'map_lookup' point to the associated map_lookup structure. This means
that for an extent map associated to an inode extent, we are not using
this 'map_lookup' pointer, so wasting 8 bytes (on a 64 bits platform);
4) Extent maps associated to a chunk mapping are never merged or split so
it's pointless to use the existing extent map infrastructure.
So add a dedicated data structure named 'btrfs_chunk_map' to represent
chunk mappings, this is basically the existing map_lookup structure with
some extra fields:
1) 'start' to contain the chunk logical address;
2) 'chunk_len' to contain the chunk's length;
3) 'stripe_size' for the stripe size;
4) 'rb_node' for insertion into a rb tree;
5) 'refs' for reference counting.
This way we do a single memory allocation for chunk mappings and we don't
waste memory for them with unused/unnecessary fields from an extent_map.
We also save 8 bytes from the extent_map structure by removing the
'map_lookup' pointer, so the size of struct extent_map is reduced from
144 bytes down to 136 bytes, and we can now have 30 extents map per 4K
page instead of 28.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently the last_trans_committed field of struct btrfs_fs_info is
modified and read without any locking or other protection. For example
early in the fsync path, skip_inode_logging() is called which reads
fs_info->last_trans_committed, but at the same time we can have a
transaction commit completing and updating that field.
In the case of an fsync this is harmless and any data race should be
rare and at most cause an unnecessary logging of an inode.
To avoid data race warnings from tools like KCSAN and other issues such
as load and store tearing (amongst others, see [1]), create helpers to
access the last_trans_committed field of struct btrfs_fs_info using
READ_ONCE() and WRITE_ONCE(), and use these helpers everywhere.
[1] https://lwn.net/Articles/793253/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently the generation field of struct btrfs_fs_info is always modified
while holding fs_info->trans_lock locked. Most readers will access this
field without taking that lock but while holding a transaction handle,
which is safe to do due to the transaction life cycle.
However there are other readers that are neither holding the lock nor
holding a transaction handle open:
1) When reading an inode from disk, at btrfs_read_locked_inode();
2) When reading the generation to expose it to sysfs, at
btrfs_generation_show();
3) Early in the fsync path, at skip_inode_logging();
4) When creating a hole at btrfs_cont_expand(), during write paths,
truncate and reflinking;
5) In the fs_info ioctl (btrfs_ioctl_fs_info());
6) While mounting the filesystem, in the open_ctree() path. In these
cases it's safe to directly read fs_info->generation as no one
can concurrently start a transaction and update fs_info->generation.
In case of the fsync path, races here should be harmless, and in the worst
case they may cause a fsync to log an inode when it's not really needed,
so nothing bad from a functional perspective. In the other cases it's not
so clear if functional problems may arise, though in case 1 rare things
like a load/store tearing [1] may cause the BTRFS_INODE_NEEDS_FULL_SYNC
flag not being set on an inode and therefore result in incorrect logging
later on in case a fsync call is made.
To avoid data race warnings from tools like KCSAN and other issues such
as load and store tearing (amongst others, see [1]), create helpers to
access the generation field of struct btrfs_fs_info using READ_ONCE() and
WRITE_ONCE(), and use these helpers where needed.
[1] https://lwn.net/Articles/793253/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
