| Age | Commit message (Collapse) | Author |
|---|
|
Link: https://lore.kernel.org/all/6822ab02.050a0220.f2294.00cb.GAE@google.com/T/
Reported-by: syzbot+2c3ef91c9523c3d1a25c@syzkaller.appspotmail.com
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If the final line in in the message to be printed is blang, don't print
it.
This happens with indented printbufs - after a newline we emit spaces up
to the indent level.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Pretty printer for struct bio, to be used for async object debugging.
This is pretty minimal, we'll add more to it as we discover what we
need.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_print_string_as_lines() is a low level helper that allows messages
longer than 1k to be printed without truncation.
But we should always be printing with the helpers that take a filesystem
object, if we're in fsck they direct output to the userspace process
controlling fsck instead of the dmesg log.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Don't print a newline on empty string; this was causing us to also print
an extra newline when we got to the end of th string.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
dm-flakey is busted, and this is simpler anyways - this lets us test the
checksum error retry ptahs
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The eytzinger code was previously relying on the following wrap-around
properties and their "eytzinger0" equivalents:
eytzinger1_prev(0, size) == eytzinger1_last(size)
eytzinger1_next(0, size) == eytzinger1_first(size)
However, these properties are no longer relied upon and no longer
necessary, so remove the corresponding asserts and forbid the use of
eytzinger1_prev(0, size) and eytzinger1_next(0, size).
This allows to further simplify the code in eytzinger1_next() and
eytzinger1_prev(): where the left shifting happens, eytzinger1_next() is
trying to move i to the lowest child on the left, which is equivalent to
doubling i until the next doubling would cause it to be greater than
size. This is implemented by shifting i to the left so that the most
significant bits align and then shifting i to the right by one if the
result is greater than size.
Likewise, eytzinger1_prev() is trying to move to the lowest child on the
right; the same applies here.
The 1-offset in (size - 1) in eytzinger1_next() isn't needed at all, but
the equivalent offset in eytzinger1_prev() is surprisingly needed to
preserve the 'eytzinger1_prev(0, size) == eytzinger1_last(size)'
property. However, since we no longer support that property, we can get
rid of these offsets as well. This saves one addition in each function
and makes the code less confusing.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Function eytzinger0_find() isn't currently covered, so add a self test.
We can rely on eytzinger0_find_le() here because it is being
tested independently.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add an eytzinger0_find_ge() self test similar to eytzinger0_find_gt().
Note that this test requires eytzinger0_find_ge() to return the first
matching element in the array in case of duplicates. To prevent
bisection errors, we only add this test after strenghening the original
implementation (see the previous commit).
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add an eytzinger0_find_gt() self test similar to eytzinger0_find_le().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Rename eytzinger0_find_test_val() to eytzinger0_find_test_le() and add a
new eytzinger0_find_test_val() wrapper that calls it.
We have already established that the array is sorted in eytzinger order,
so we can use the eytzinger iterator functions and check the boundary
conditions to verify the result of eytzinger0_find_le().
Only scan the entire array if we get an incorrect result. When we need
to scan, use eytzinger0_for_each_prev() so that we'll stop at the
highest matching element in the array in case there are duplicates;
going through the array linearly wouldn't give us that.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add an eytzinger0_for_each_prev() macro for iterating through an
eytzinger array in reverse.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
In eytzinger0_find_test(), remember the smallest element seen so far
instead of comparing adjacent array elements.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
In eytzinger[01]_test(), make sure that eytzinger[01]_for_each()
iterates over all array elements.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fix an obvious typo in cmp_u16().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
pr_info() format strings need to be newline terminated.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The iterator variable of eytzinger0_for_each() loops has been changed to
be locally scoped at some point, so remove variables defined outside the
loop that are now unused. In addition and for clarity, use a different
variable inside those loops where an outside variable would be shadowed.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bare 64 bit divides not allowed, whoops
arm-linux-gnueabi-ld: drivers/char/random.o: in function `__get_random_u64_below':
drivers/char/random.c:602:(.text+0xc70): undefined reference to `__aeabi_uldivmod'
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
steal the (clever) algorithm from get_random_u32_below()
this fixes a bug where we were passing roundup_pow_of_two() a 64 bit
number - we're squaring device latencies now:
[ +1.681698] ------------[ cut here ]------------
[ +0.000010] UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13
[ +0.000011] shift exponent 64 is too large for 64-bit type 'long unsigned int'
[ +0.000011] CPU: 1 UID: 0 PID: 196 Comm: kworker/u32:13 Not tainted 6.14.0-rc6-dave+ #10
[ +0.000012] Hardware name: ASUS System Product Name/PRIME B460I-PLUS, BIOS 1301 07/13/2021
[ +0.000005] Workqueue: events_unbound __bch2_read_endio [bcachefs]
[ +0.000354] Call Trace:
[ +0.000005] <TASK>
[ +0.000007] dump_stack_lvl+0x5d/0x80
[ +0.000018] ubsan_epilogue+0x5/0x30
[ +0.000008] __ubsan_handle_shift_out_of_bounds.cold+0x61/0xe6
[ +0.000011] bch2_rand_range.cold+0x17/0x20 [bcachefs]
[ +0.000231] bch2_bkey_pick_read_device+0x547/0x920 [bcachefs]
[ +0.000229] __bch2_read_extent+0x1e4/0x18e0 [bcachefs]
[ +0.000241] ? bch2_btree_iter_peek_slot+0x3df/0x800 [bcachefs]
[ +0.000180] ? bch2_read_retry_nodecode+0x270/0x330 [bcachefs]
[ +0.000230] bch2_read_retry_nodecode+0x270/0x330 [bcachefs]
[ +0.000230] bch2_rbio_retry+0x1fa/0x600 [bcachefs]
[ +0.000224] ? bch2_printbuf_make_room+0x71/0xb0 [bcachefs]
[ +0.000243] ? bch2_read_csum_err+0x4a4/0x610 [bcachefs]
[ +0.000278] bch2_read_csum_err+0x4a4/0x610 [bcachefs]
[ +0.000227] ? __bch2_read_endio+0x58b/0x870 [bcachefs]
[ +0.000220] __bch2_read_endio+0x58b/0x870 [bcachefs]
[ +0.000268] ? try_to_wake_up+0x31c/0x7f0
[ +0.000011] ? process_one_work+0x176/0x330
[ +0.000008] process_one_work+0x176/0x330
[ +0.000008] worker_thread+0x252/0x390
[ +0.000008] ? __pfx_worker_thread+0x10/0x10
[ +0.000006] kthread+0xec/0x230
[ +0.000011] ? __pfx_kthread+0x10/0x10
[ +0.000009] ret_from_fork+0x31/0x50
[ +0.000009] ? __pfx_kthread+0x10/0x10
[ +0.000008] ret_from_fork_asm+0x1a/0x30
[ +0.000012] </TASK>
[ +0.000046] ---[ end trace ]---
Reported-by: Roland Vet <vet.roland@protonmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds mount options for specifying recovery passes to run, or
exclude; the immediate need for this is that backpointers fsck is having
trouble completing, so we need a way to skip it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
need this so cmd_option in userspace can handle it
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Bcachefs often uses this function to divide by nanosecond times - which
can easily cause problems when cast to u32. For example, `cat
/sys/fs/bcachefs/*/internal/rebalance_status` would return invalid data
in the `duration waited` field because dividing by the number of
nanoseconds in a minute requires the divisor parameter to be u64.
Signed-off-by: Reed Riley <reed@riley.engineer>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
cat /sys/fs/bcachefs/*/internal/rebalance_status
waiting
io wait duration: 13.5 GiB
io wait remaining: 627 MiB
duration waited: 1392 m
duration waited was increasing at a rate of about 14 times the expected
rate.
div_u64 takes a u32 divisor, but u->nsecs (from time_units[]) can be
bigger than u32.
Signed-off-by: Feiko Nanninga <feiko.nanninga@fnanninga.de>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fixes: 7423330e30ab ("bcachefs: prt_printf() now respects \r\n\t")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- In the series "treewide: Refactor heap related implementation",
Kuan-Wei Chiu has significantly reworked the min_heap library code
and has taught bcachefs to use the new more generic implementation.
- Yury Norov's series "Cleanup cpumask.h inclusion in core headers"
reworks the cpumask and nodemask headers to make things generally
more rational.
- Kuan-Wei Chiu has sent along some maintenance work against our
sorting library code in the series "lib/sort: Optimizations and
cleanups".
- More library maintainance work from Christophe Jaillet in the series
"Remove usage of the deprecated ida_simple_xx() API".
- Ryusuke Konishi continues with the nilfs2 fixes and clanups in the
series "nilfs2: eliminate the call to inode_attach_wb()".
- Kuan-Ying Lee has some fixes to the gdb scripts in the series "Fix
GDB command error".
- Plus the usual shower of singleton patches all over the place. Please
see the relevant changelogs for details.
* tag 'mm-nonmm-stable-2024-07-21-15-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (98 commits)
ia64: scrub ia64 from poison.h
watchdog/perf: properly initialize the turbo mode timestamp and rearm counter
tsacct: replace strncpy() with strscpy()
lib/bch.c: use swap() to improve code
test_bpf: convert comma to semicolon
init/modpost: conditionally check section mismatch to __meminit*
init: remove unused __MEMINIT* macros
nilfs2: Constify struct kobj_type
nilfs2: avoid undefined behavior in nilfs_cnt32_ge macro
math: rational: add missing MODULE_DESCRIPTION() macro
lib/zlib: add missing MODULE_DESCRIPTION() macro
fs: ufs: add MODULE_DESCRIPTION()
lib/rbtree.c: fix the example typo
ocfs2: add bounds checking to ocfs2_check_dir_entry()
fs: add kernel-doc comments to ocfs2_prepare_orphan_dir()
coredump: simplify zap_process()
selftests/fpu: add missing MODULE_DESCRIPTION() macro
compiler.h: simplify data_race() macro
build-id: require program headers to be right after ELF header
resource: add missing MODULE_DESCRIPTION()
...
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Replace 'utiility' with 'utility'.
Link: https://lkml.kernel.org/r/20240524152958.919343-4-visitorckw@gmail.com
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Brian Foster <bfoster@redhat.com>
Cc: Ching-Chun (Jim) Huang <jserv@ccns.ncku.edu.tw>
Cc: Coly Li <colyli@suse.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Sakai <msakai@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Pull out eytzinger.c and kill eytzinger_cmp_fn. We now provide
eytzinger0_sort and eytzinger0_sort_r, which use the standard cmp_func_t
and cmp_r_func_t callbacks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Currently, struct time_stats has the optional ability to quantize the
information that it collects. This is /probably/ useful for callers who
want to see quantized information, but it more than doubles the size of
the structure from 224 bytes to 464. For users who don't care about
that (e.g. upcoming xfs patches) and want to avoid wasting 240 bytes per
counter, split the two into separate pieces.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The only caller of this code (time_stats) always knows the weights and
whether or not any information has been collected. Pass this
information into the mean and variance code so that it doesn't have to
store that information. This reduces the structure size from 24 to 16
bytes, which shrinks each time_stats counter to 192 bytes from 208.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
prep work for lifting out of fs/bcachefs/
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Missed a call in the previous fix.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes spurious outliers in the frequency stats.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fixes: e6a2566f7a00 ("bcachefs: Better journal tracepoints")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Reported-by: smatch
|
|
Also print out the data_opts, so that we can see what specifically is
being done to an extent.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The pointer dev_name can be modified by strseq(),
then causes the memleak:
unreferenced object 0xffff9d08a2916c80 (size 32):
comm "mount.bcachefs", pid 9090, jiffies 4295856224 (age 17.564s)
hex dump (first 32 bytes):
2f 64 65 76 2f 6d 61 70 70 65 72 2f 74 65 73 74 /dev/mapper/test
2d 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -0..............
backtrace:
[<00000000c5d3be7d>] __kmem_cache_alloc_node+0x1f3/0x2c0
[<0000000052215d26>] __kmalloc_node_track_caller+0x51/0x150
[<0000000069fea956>] kstrdup+0x32/0x60
[<000000000877fcf1>] bch2_split_devs+0x3f/0x150 [bcachefs]
[<000000007ee93204>] bch2_mount+0xcb/0x640 [bcachefs]
[<000000002dd1e04b>] legacy_get_tree+0x30/0x60
[<000000006afc31d3>] vfs_get_tree+0x28/0xf0
[<000000007b0c538e>] path_mount+0x475/0xb60
[<0000000092de5882>] __x64_sys_mount+0x105/0x140
[<0000000054fc05d8>] do_syscall_64+0x42/0xf0
[<00000000df584910>] entry_SYSCALL_64_after_hwframe+0x6e/0x76
Fix it by copy pointer dev_name at beginning and free the copied
pointer at end.
Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We now include backtraces for every thread involved in the cycle.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Bit of cleanup & modernization: also moving this code to util.c, it'll
be used by userspace as well.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
ctime_r() outputs a newline, which we don't want.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This introduces a new helper for connecting time_stats to state changes,
i.e. when taking journal reservations is blocked for some reason.
We use this to track separately the different reasons the journal might
be blocked - i.e. space in the journal full, or the journal pin fifo
full.
Also do some cleanup and improvements on the time stats code.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Improved, better named version of pr_time().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
