summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/Kconfig
AgeCommit message (Collapse)Author
2025-07-09serial: sh-sci: Add support for RZ/T2H SCIThierry Bultel
Define a new RSCI port type, and the RSCI 32 bits registers set. The RZ/T2H SCI has a a fifo, and a quite different set of registers from the original SH SCI ones. DMA is not supported yet. Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20250630202323.279809-6-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-14serial: tegra-utc: Add driver for Tegra UART Trace Controller (UTC)Kartik Rajput
The Tegra264 SoC supports the UART Trace Controller (UTC), which allows multiple firmware clients (up to 16) to share a single physical UART. Each client is provided with its own interrupt and has access to a 128-character wide FIFO for both transmit (TX) and receive (RX) operations. Add tegra-utc driver to support Tegra UART Trace Controller (UTC) client. Signed-off-by: Kartik Rajput <kkartik@nvidia.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250213125612.4705-3-kkartik@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-14Revert "tty/serial: Add kgdb_nmi driver"Douglas Anderson
This reverts commit 0c57dfcc6c1d037243c2f8fbf62eab3633326ec0. The functionality was supoosed to be used by a later patch in the series that never landed [1]. Drop it. NOTE: part of functionality was already reverted by commit 39d0be87438a ("serial: kgdb_nmi: Remove unused knock code"). Also note that this revert is not a clean revert given code changes that have happened in the meantime. It's obvious that nobody is using this code since the two exposed functions (kgdb_register_nmi_console() and kgdb_unregister_nmi_console()) are both no-ops if "arch_kgdb_ops.enable_nmi" is not defined. No architectures define it. [1] https://lore.kernel.org/lkml/1348522080-32629-9-git-send-email-anton.vorontsov@linaro.org/ Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: URL [1] Link: https://lore.kernel.org/r/20250129082535.1.Ia095eac1ae357f87d23e7af2206741f5d40788f1@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-10tty: serial: atmel: make it selectable for ARCH_LAN969XRobert Marko
LAN969x uses the Atmel serial, so make it selectable for ARCH_LAN969X. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20250108131045.40642-3-robert.marko@sartura.hr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-28tty: serial: handle HAS_IOPORT dependenciesNiklas Schnelle
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at compile time. We thus need to add HAS_IOPORT as dependency for those drivers using them unconditionally. Some 8250 serial drivers support MMIO only use, so fence only the parts requiring I/O ports and print an error message if a device can't be supported with the current configuration. Co-developed-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-06-04serial: sc16is7xx: re-add Kconfig SPI or I2C dependencyHugo Villeneuve
Commit d49216438139 ("serial: sc16is7xx: split into core and I2C/SPI parts (core)") removed Kconfig SPI_MASTER or I2C dependency for SERIAL_SC16IS7XX (core). This removal was done because I inadvertently misinterpreted some review comments. Because of that, the driver question now pops up if both I2C and SPI_MASTER are disabled. Re-add Kconfig SPI_MASTER or I2C dependency to fix the problem. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Fixes: d49216438139 ("serial: sc16is7xx: split into core and I2C/SPI parts (core)") Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20240603152601.3689319-3-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-04serial: sc16is7xx: rename Kconfig CONFIG_SERIAL_SC16IS7XX_COREHugo Villeneuve
Commit d49216438139 ("serial: sc16is7xx: split into core and I2C/SPI parts (core)") renamed SERIAL_SC16IS7XX_CORE by SERIAL_SC16IS7XX. This means that some configs should have been updated when I submitted the original patch, but unfortunately they were not. Geert mentioned for example: arch/mips/configs/cu1??0-neo_defconfig Rename SERIAL_SC16IS7XX to SERIAL_SC16IS7XX_CORE so that existing configs will still work correctly. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Fixes: d49216438139 ("serial: sc16is7xx: split into core and I2C/SPI parts (core)") Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20240603152601.3689319-2-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-11serial: sc16is7xx: split into core and I2C/SPI parts (core)Hugo Villeneuve
Split the common code from sc16is7xx driver and move the I2C and SPI bus parts into interface-specific source files. sc16is7xx becomes the core functions which can support multiple bus interfaces like I2C and SPI. No functional changes intended. Also simplify and improve Kconfig entries. - Capitalize SPI keyword for consistency - Display list of supported ICs each on a separate line (and aligned) to facilitate locating a specific IC model - Add Manufacturer name at start of description string - Add UART keyword to description string Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20240409154253.3043822-4-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09serial: max3100: Update Kconfig entryAndy Shevchenko
The driver actually supports more than one chip. Update Kconfig entry to list the supported chips. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240402195306.269276-17-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-20Merge tag 'riscv-for-linus-6.8-mw4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - Support for tuning for systems with fast misaligned accesses. - Support for SBI-based suspend. - Support for the new SBI debug console extension. - The T-Head CMOs now use PA-based flushes. - Support for enabling the V extension in kernel code. - Optimized IP checksum routines. - Various ftrace improvements. - Support for archrandom, which depends on the Zkr extension. - The build is no longer broken under NET=n, KUNIT=y for ports that don't define their own ipv6 checksum. * tag 'riscv-for-linus-6.8-mw4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (56 commits) lib: checksum: Fix build with CONFIG_NET=n riscv: lib: Check if output in asm goto supported riscv: Fix build error on rv32 + XIP riscv: optimize ELF relocation function in riscv RISC-V: Implement archrandom when Zkr is available riscv: Optimize hweight API with Zbb extension riscv: add dependency among Image(.gz), loader(.bin), and vmlinuz.efi samples: ftrace: Add RISC-V support for SAMPLE_FTRACE_DIRECT[_MULTI] riscv: ftrace: Add DYNAMIC_FTRACE_WITH_DIRECT_CALLS support riscv: ftrace: Make function graph use ftrace directly riscv: select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY lib/Kconfig.debug: Update AS_HAS_NON_CONST_LEB128 comment and name riscv: Restrict DWARF5 when building with LLVM to known working versions riscv: Hoist linker relaxation disabling logic into Kconfig kunit: Add tests for csum_ipv6_magic and ip_fast_csum riscv: Add checksum library riscv: Add checksum header riscv: Add static key for misaligned accesses asm-generic: Improve csum_fold RISC-V: selftests: cbo: Ensure asm operands match constraints ...
2024-01-10tty/serial: Add RISC-V SBI debug console based earlyconAnup Patel
We extend the existing RISC-V SBI earlycon support to use the new RISC-V SBI debug console extension. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20231124070905.1043092-4-apatel@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-25serial: uartlite: Use dynamic allocation for major number when uart ports > 4Manikanta Guntupalli
Device number 204 has a range of minors on major number. uart_register_driver is failing due to lack of minor numbers when more number of uart ports used. So, to avoid minor number limitation on 204 major number use dynamic major allocation when more than 4 uart ports used otherwise use static major allocation. https://docs.kernel.org/arch/arm/sa1100/serial_uart.html Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com> Link: https://lore.kernel.org/r/20231116134003.3762725-3-manikanta.guntupalli@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-16drivers/tty/serial: add ESP32S3 ACM gadget driverMax Filippov
Add driver for the ACM gadget controller of the Espressif ESP32S3 SoC. Hardware specification is available at the following URL: https://www.espressif.com/sites/default/files/documentation/esp32-s3_technical_reference_manual_en.pdf (Chapter 33 USB Serial/JTAG Controller) Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Link: https://lore.kernel.org/r/20231010085926.1021667-6-jcmvbkbc@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-16drivers/tty/serial: add driver for the ESP32 UARTMax Filippov
Add driver for the UART controllers of the Espressif ESP32 and ESP32S3 SoCs. Hardware specification is available at the following URLs: https://www.espressif.com/sites/default/files/documentation/esp32_technical_reference_manual_en.pdf (Chapter 13 UART Controller) https://www.espressif.com/sites/default/files/documentation/esp32-s3_technical_reference_manual_en.pdf (Chapter 26 UART Controller) Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Link: https://lore.kernel.org/r/20231010085926.1021667-4-jcmvbkbc@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-03Merge tag 'tty-6.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of tty/serial driver updates for 6.5-rc1. Included in here are: - tty_audit code cleanups from Jiri - more 8250 cleanups from Ilpo - samsung_tty driver bugfixes - 8250 lock port updates - usual fsl_lpuart driver updates and fixes - other small serial driver fixes and updates, full details in the shortlog All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (58 commits) tty_audit: make data of tty_audit_log() const tty_audit: make tty pointers in exposed functions const tty_audit: make icanon a bool tty_audit: invert the condition in tty_audit_log() tty_audit: use kzalloc() in tty_audit_buf_alloc() tty_audit: use TASK_COMM_LEN for task comm Revert "8250: add support for ASIX devices with a FIFO bug" serial: atmel: don't enable IRQs prematurely tty: serial: Add Nuvoton ma35d1 serial driver support tty: serial: fsl_lpuart: add earlycon for imx8ulp platform tty: serial: imx: fix rs485 rx after tx selftests: tty: add selftest for tty timestamp updates tty: tty_io: update timestamps on all device nodes tty: fix hang on tty device with no_room set serial: core: fix -EPROBE_DEFER handling in init serial: 8250_omap: Use force_suspend and resume for system suspend tty: serial: samsung_tty: Use abs() to simplify some code tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() when iterating clk tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() in case of error serial: 8250: Apply FSL workarounds also without SERIAL_8250_CONSOLE ...
2023-06-27Merge tag 'docs-arm-move' of git://git.lwn.net/linuxLinus Torvalds
Pull arm documentation move from Jonathan Corbet: "Move the Arm architecture documentation under Documentation/arch/. This brings some order to the documentation directory, declutters the top-level directory, and makes the documentation organization more closely match that of the source" * tag 'docs-arm-move' of git://git.lwn.net/linux: dt-bindings: Update Documentation/arm references docs: update some straggling Documentation/arm references crypto: update some Arm documentation references mips: update a reference to a moved Arm Document arm64: Update Documentation/arm references arm: update in-source documentation references arm: docs: Move Arm documentation to Documentation/arch/
2023-06-19tty: serial: Add Nuvoton ma35d1 serial driver supportJacky Huang
This adds UART and console driver for Nuvoton ma35d1 Soc. It supports full-duplex communication, FIFO control, and hardware flow control. Command line set "console=ttyNVT0,115200", NVT means Nuvoton MA35 UART port. The UART driver probe will create path named "/dev/ttyNVTx". Signed-off-by: Jacky Huang <ychuang3@nuvoton.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230619032330.233796-2-ychuang570808@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-16docs: update some straggling Documentation/arm referencesJonathan Corbet
The Arm documentation has moved to Documentation/arch/arm; update the last remaining references to match. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Samuel Holland <samuel@sholland.org> Cc: Thierry Reding <thierry.reding@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # for pwm Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2023-05-30serial: cpm_uart: Fix a COMPILE_TEST dependencyHerve Codina
In a COMPILE_TEST configuration, the cpm_uart driver uses symbols from the cpm_uart_cpm2.c file. This file is compiled only when CONFIG_CPM2 is set. Without this dependency, the linker fails with some missing symbols for COMPILE_TEST configuration that needs SERIAL_CPM without enabling CPM2. This lead to: depends on CPM2 || CPM1 || (PPC32 && CPM2 && COMPILE_TEST) This dependency does not make sense anymore and can be simplified removing all the COMPILE_TEST part. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305160221.9XgweObz-lkp@intel.com/ Fixes: e3e7b13bffae ("serial: allow COMPILE_TEST for some drivers") Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20230523085902.75837-3-herve.codina@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-20serial: make SiFive serial drivers depend on ARCH_ symbolsConor Dooley
As part of converting RISC-V SOC_FOO symbols to ARCH_FOO to match the use of such symbols on other architectures, convert the SiFive serial driver Kconfig entries from the SOC_ symbols to ARCH_ instead. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230406-carnival-aspirate-fcf69a30078c@spud Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-29tty: serial: remove obsolete config SERIAL_SAMSUNG_UARTS_4Lukas Bulwahn
Commit 1ea35b355722 ("ARM: s3c: remove s3c24xx specific hacks"), allows simplifying the whole config logic for SERIAL_SAMSUNG_UARTS, and did this config simplification. However, it misses that SERIAL_SAMSUNG_UARTS_4's effect was just to control SERIAL_SAMSUNG_UARTS, and with the commit's change, the config SERIAL_SAMSUNG_UARTS_4 has no remaining effect and can be deleted. Remove this obsolete config SERIAL_SAMSUNG_UARTS_4. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230317071538.29366-1-lukas.bulwahn@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09Revert "tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config ↵Tom Rix
dependency" This reverts commit 5779a072c248db7a40cfd0f5ea958097fd1d9a30. This results in a link error of ld: drivers/tty/serial/earlycon.o: in function `parse_options': drivers/tty/serial/earlycon.c:99: undefined reference to `uart_parse_earlycon' When the config is in this state CONFIG_SERIAL_CORE=m CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_EARLYCON=y CONFIG_SERIAL_FSL_LPUART=m CONFIG_SERIAL_FSL_LPUART_CONSOLE=y Fixes: 5779a072c248 ("tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config dependency") Cc: stable <stable@kernel.org> Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230226173846.236691-1-trix@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-24Merge tag 'tty-6.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is the big set of serial and tty driver updates for 6.3-rc1. Once again, Jiri and Ilpo have done a number of core vt and tty/serial layer cleanups that were much needed and appreciated. Other than that, it's just a bunch of little tty/serial driver updates: - qcom-geni-serial driver updates - liteuart driver updates - hvcs driver cleanups - n_gsm updates and additions for new features - more 8250 device support added - fpga/dfl update and additions - imx serial driver updates - fsl_lpuart updates - other tiny fixes and updates for serial drivers All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (143 commits) tty: n_gsm: add keep alive support serial: imx: remove a redundant check dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h tty: n_gsm: add TIOCMIWAIT support tty: n_gsm: add RING/CD control support tty: n_gsm: mark unusable ioctl structure fields accordingly serial: imx: get rid of registers shadowing serial: imx: refine local variables in rxint() serial: imx: stop using USR2 in FIFO reading loop serial: imx: remove redundant USR2 read from FIFO reading loop serial: imx: do not break from FIFO reading loop prematurely serial: imx: do not sysrq broken chars serial: imx: work-around for hardware RX flood serial: imx: factor-out common code to imx_uart_soft_reset() serial: 8250_pci1xxxx: Add power management functions to quad-uart driver serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver serial: 8250_pci1xxxx: Add driver for quad-uart support serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c tty: pcn_uart: fix memory leak with using debugfs_lookup() ...
2023-01-19serial: liteuart: drop obsolete dependency on COMPILE_TESTJean Delvare
Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), it is possible to test-build any driver which depends on OF on any architecture by explicitly selecting OF. Therefore depending on COMPILE_TEST as an alternative is no longer needed. It is actually better to always build such drivers with OF enabled, so that the test builds are closer to how each driver will actually be built on its intended target. Building them without OF may not test much as the compiler will optimize out potentially large parts of the code. In the worst case, this could even pop false positive warnings. Dropping COMPILE_TEST here improves the quality of our testing and avoids wasting time on non-existent issues. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Karol Gugala <kgugala@antmicro.com> Cc: Mateusz Holenko <mholenko@antmicro.com> Cc: Gabriel Somlo <gsomlo@gmail.com> Cc: Joel Stanley <joel@jms.id.au> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Gabriel Somlo <gsomlo@gmail.com> Link: https://lore.kernel.org/r/20221125142756.3e51a28d@endymion.delvare Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19serial: Rename earlycon semihost driverBin Meng
Now that earlycon semihost driver works on RISC-V too, let's use a much more generic name for the driver. Signed-off-by: Bin Meng <bmeng@tinylab.org> Tested-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Link: https://lore.kernel.org/r/20221209150437.795918-4-bmeng@tinylab.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-19riscv: Implement semihost.h for earlycon semihost driverBin Meng
Per RISC-V semihosting spec [1], implement semihost.h for the existing Arm semihosting earlycon driver to work on RISC-V. Link: https://github.com/riscv/riscv-semihosting-spec/blob/main/riscv-semihosting-spec.adoc [1] Signed-off-by: Bin Meng <bmeng@tinylab.org> Tested-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Link: https://lore.kernel.org/r/20221209150437.795918-3-bmeng@tinylab.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-16ARM: s3c: remove s3c24xx specific hacksArnd Bergmann
A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or similar symbols that are no longer available with the platform gone, though the drivers themselves are still used on newer platforms, so remove these hacks. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-02serial: sifive: select by default if SOC_CANAANConor Dooley
With the aim of dropping direct selects of drivers from Kconfig.socs, default the SiFive serial drivers to enabled if SOC_CANAAN. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20221005171348.167476-4-conor@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-02serial: sifive: select by default if SOC_SIFIVEConor Dooley
With the aim of dropping direct selects of drivers from Kconfig.socs, default the SiFive serial drivers to the value of SOC_SIFIVE. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20221005171348.167476-3-conor@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-14Merge tag 'parisc-for-6.1-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: "Fixes: - When we added basic vDSO support in kernel 5.18 we introduced a bug which prevented a mmap() of graphic card memory. This is because we used the DMB (data memory break trap bit) page flag as special-bit, but missed to clear that bit when loading the TLB. - Graphics card memory size was not correctly aligned - Spelling fixes (from Colin Ian King) Enhancements: - PDC console (which uses firmware calls) now rewritten as early console - Reduced size of alternative tables" * tag 'parisc-for-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix spelling mistake "mis-match" -> "mismatch" in eisa driver parisc: Fix userspace graphics card breakage due to pgtable special bit parisc: fbdev/stifb: Align graphics memory size to 4MB parisc: Convert PDC console to an early console parisc: Reduce kernel size by packing alternative tables
2022-10-11parisc: Convert PDC console to an early consoleHelge Deller
Rewrite the PDC console to become an early console. Beside the fact that now boot information is visible until another (text- or graphics) console takes over, this benefits as well machines with a yet-unsupported STI console and kgdb. Signed-off-by: Helge Deller <deller@gmx.de>
2022-10-07Merge tag 'tty-6.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of TTY and Serial driver updates for 6.1-rc1. Lots of cleanups in here, no real new functionality this time around, with the diffstat being that we removed more lines than we added! Included in here are: - termios unification cleanups from Al Viro, it's nice to finally get this work done - tty serial transmit cleanups in various drivers in preparation for more cleanup and unification in future releases (that work was not ready for this release) - n_gsm fixes and updates - ktermios cleanups and code reductions - dt bindings json conversions and updates for new devices - some serial driver updates for new devices - lots of other tiny cleanups and janitorial stuff. Full details in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits) serial: cpm_uart: Don't request IRQ too early for console port tty: serial: do unlock on a common path in altera_jtaguart_console_putc() tty: serial: unify TX space reads under altera_jtaguart_tx_space() tty: serial: use FIELD_GET() in lqasc_tx_ready() tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar() tty: serial: allow pxa.c to be COMPILE_TESTed serial: stm32: Fix unused-variable warning tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL serial: 8250: Fix restoring termios speed after suspend serial: Deassert Transmit Enable on probe in driver-specific way serial: 8250_dma: Convert to use uart_xmit_advance() serial: 8250_omap: Convert to use uart_xmit_advance() MAINTAINERS: Solve warning regarding inexistent atmel-usart binding serial: stm32: Deassert Transmit Enable on ->rs485_config() serial: ar933x: Deassert Transmit Enable on ->rs485_config() tty: serial: atmel: Use FIELD_PREP/FIELD_GET tty: serial: atmel: Make the driver aware of the existence of GCLK tty: serial: atmel: Only divide Clock Divisor if the IP is USART tty: serial: atmel: Separate mode clearing between UART and USART dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock ...
2022-09-30tty: serial: allow pxa.c to be COMPILE_TESTedJiri Slaby
There is no issue compiling pxa.c even in the SERIAL_8250=y case. So to cover it in the usual configurations, add "|| COMPILE_TEST" there. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220927110528.12815-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMELSergiu Moga
Now that the driver makes use of `__clk_is_enabled()` in order to know whether a `clk_disable_unprepare()` is needed or not on the GCLK, a new dependency has been introduced: COMMON_CLK. If this `CONFIG_COMMON_CLK` is not enabled, whatever config may have this driver enabled without COMMON_CLK then an undefined reference to `__clk_is_enabled()` will be issued by the linker. Thus, make sure that, unless `CONFIG_COMMON_CLK` is enabled, this driver is not compiled. Fixes: 5e3ce1f26129 ("tty: serial: atmel: Make the driver aware of the existence of GCLK") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20220926143244.485578-1-sergiu.moga@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config dependencyJindong Yue
Remove the limitation of SERIAL_FSL_LPUART=y, as we may need enable this console while SERIAL_FSL_LPUART=m. Signed-off-by: Jindong Yue <jindong.yue@nxp.com> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20220802101613.30879-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-15arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCAWilliam Zhang
With Broadcom Broadband arch ARCH_BCMBCA supported in the kernel, this patch series migrate the ARCH_BCM4908 symbol to ARCH_BCMBCA. Hence replace ARCH_BCM4908 with ARCH_BCMBCA in subsystem Kconfig files. Signed-off-by: William Zhang <william.zhang@broadcom.com> Acked-by: Guenter Roeck <linux@roeck-us.net> (for watchdog) Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci) Acked-by: Wolfram Sang <wsa@kernel.org> (for i2c) Acked-by: Philipp Zabel <p.zabel@pengutronix.de> (for reset) Link: https://lore.kernel.org/r/20220803175455.47638-7-william.zhang@broadcom.com Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-08-08Merge tag 'tty-6.0-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.0-rc1. It was delayed from last week as I wanted to make sure the last commit here got some good testing in linux-next and elsewhere as it seemed to show up only late in testing for some reason. Nothing major here, just lots of cleanups from Jiri and Ilpo to make the tty core cleaner (Jiri) and the rs485 code simpler to use (Ilpo). Also included in here is the obligatory n_gsm updates from Daniel Starke and lots of tiny driver updates and minor fixes and tweaks for other smaller serial drivers. All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits) tty: serial: qcom-geni-serial: Fix %lu -> %u in print statements tty: amiserial: Fix comment typo tty: serial: document uart_get_console() tty: serial: serial_core, reformat kernel-doc for functions Documentation: serial: link uart_ops properly Documentation: serial: move GPIO kernel-doc to the functions Documentation: serial: dedup kernel-doc for uart functions Documentation: serial: move uart_ops documentation to the struct dt-bindings: serial: snps-dw-apb-uart: Document Rockchip RV1126 serial: mvebu-uart: uart2 error bits clearing tty: serial: fsl_lpuart: correct the count of break characters serial: stm32: make info structs static to avoid sparse warnings serial: fsl_lpuart: zero out parity bit in CS7 mode tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate. serial: 8250_bcm2835aux: Add missing clk_disable_unprepare() tty: vt: initialize unicode screen buffer serial: remove VR41XX serial driver serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags serial: 8250_dwlib: remove redundant sanity check for RS485 flags dt_bindings: rs485: Correct delay values ...
2022-07-16serial: remove VR41XX serial driverThomas Bogendoerfer
Commit d3164e2f3b0a ("MIPS: Remove VR41xx support") removed support for MIPS VR41xx platform, so remove exclusive drivers for this platform, too. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Link: https://lore.kernel.org/r/20220715140322.135825-1-tsbogend@alpha.franken.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-11tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCAWilliam Zhang
Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make SERIAL_BCM63XX depending on ARCH_BCMBCA. Signed-off-by: William Zhang <william.zhang@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-06-10serial: max310x: implement I2C supportCosmin Tanislav
I2C implementation on this chip has a few key differences compared to SPI, as described in previous patches. * extended register space access needs no extra logic * slave address is used to select which UART to communicate with To accommodate these differences, add an I2C interface config, set the RevID register address and implement an empty method for setting the GlobalCommand register, since no special handling is needed for the extended register space. To handle the port-specific slave address, create an I2C dummy device for each port, except the base one (UART0), which is expected to be the one specified in firmware, and create a regmap for each I2C device. Add minimum and maximum slave addresses to each devtype for sanity checking. Also, use a separate regmap config with no write_flag_mask, since I2C has a R/W bit in its slave address, and set the max register to the address of the RevID register, since the extended register space needs no extra logic. Finally, add the I2C driver. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Link: https://lore.kernel.org/r/20220605144659.4169853-5-demonsingur@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-03Merge tag 'tty-5.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty and serial driver updates from Greg KH: "Here is the big set of tty and serial driver updates for 5.19-rc1. Lots of tiny cleanups in here, the major stuff is: - termbit cleanups and unification by Ilpo. A much needed change that goes a long way to making things simpler for all of the different arches - tty documentation cleanups and movements to their own place in the documentation tree - old tty driver cleanups and fixes from Jiri to bring some existing drivers into the modern world - RS485 cleanups and unifications to make it easier for individual drivers to support this mode instead of having to duplicate logic in each driver - Lots of 8250 driver updates and additions - new device id additions - n_gsm continued fixes and cleanups - other minor serial driver updates and cleanups All of these have been in linux-next for weeks with no reported issues" * tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (166 commits) tty: Rework receive flow control char logic pcmcia: synclink_cs: Don't allow CS5-6 serial: stm32-usart: Correct CSIZE, bits, and parity serial: st-asc: Sanitize CSIZE and correct PARENB for CS7 serial: sifive: Sanitize CSIZE and c_iflag serial: sh-sci: Don't allow CS5-6 serial: txx9: Don't allow CS5-6 serial: rda-uart: Don't allow CS5-6 serial: digicolor-usart: Don't allow CS5-6 serial: uartlite: Fix BRKINT clearing serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE serial: core: Do stop_rx in suspend path for console if console_suspend is disabled tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate. dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485 Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL" serial: msm_serial: disable interrupts in __msm_console_write() serial: meson: acquire port->lock in startup() serial: 8250_dw: Use dev_err_probe() serial: 8250_dw: Use devm_add_action_or_reset() ...
2022-04-22serial: stm32: add earlycon supportValentin Caron
Add early console support in stm32 uart driver. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Link: https://lore.kernel.org/r/20220419085330.1178925-4-valentin.caron@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-22serial: allow COMPILE_TEST for some driversJiri Slaby
Some more serial drivers can be compile-tested under certain circumstances (when building a specific architecture). So allow for that. This reduces the need of zillion mach/subarch-specific configs. And since the 0day bot has only allmodconfig's for some archs, this increases build coverage there too. Note that cpm needs a minor update in the header, so that it drags in at least some defines (CPM2 ones). Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220421101708.5640-8-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-22serial: pic32: make SERIAL_PIC32_CONSOLE depend on SERIAL_PIC32=yJiri Slaby
pic32_uart contains this: #ifdef CONFIG_SERIAL_PIC32_CONSOLE ... console_initcall(pic32_console_init); ... core_initcall(pic32_late_console_init); ... #endif ... arch_initcall(pic32_uart_init); When the driver is built as module, all three above become module_init(). So if SERIAL_PIC32_CONSOLE is set while SERIAL_PIC32=m, it results in the following build error: In file included from include/linux/device/driver.h:21, from include/linux/device.h:32, from include/linux/platform_device.h:13, from drivers/tty/serial/pic32_uart.c:12: include/linux/module.h:131:49: error: redefinition of '__inittest' So make sure SERIAL_PIC32_CONSOLE can be set only when SERIAL_PIC32=y -- similar as for other drivers. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220421101708.5640-7-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-04Merge branch 'remove-h8300' of git://git.infradead.org/users/hch/misc into ↵Arnd Bergmann
asm-generic * 'remove-h8300' of git://git.infradead.org/users/hch/misc: remove the h8300 architecture This is clearly the least actively maintained architecture we have at the moment, and probably the least useful. It is now the only one that does not support MMUs at all, and most of the boards only support 4MB of RAM, out of which the defconfig kernel needs more than half just for .text/.data. Guenter Roeck did the original patch to remove the architecture in 2013 after it had already been obsolete for a while, and Yoshinori Sato brought it back in a much more modern form in 2015. Looking at the git history since the reinstantiation, it's clear that almost all commits in the tree are build fixes or cross-architecture cleanups: $ git log --no-merges --format=%an v4.5.. arch/h8300/ | sort | uniq -c | sort -rn | head -n 12 25 Masahiro Yamada 18 Christoph Hellwig 14 Mike Rapoport 9 Arnd Bergmann 8 Mark Rutland 7 Peter Zijlstra 6 Kees Cook 6 Ingo Molnar 6 Al Viro 5 Randy Dunlap 4 Yury Norov Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-18tty: serial: samsung: Add ARTPEC-8 supportVincent Whitchurch
Add support for the UART block on the ARTPEC-8 SoC. This is closely related to the variants used on the Exynos chips. The register layout is identical to Exynos850 et al but the fifo size is different (64 bytes in each direction for all instances). Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/20220311094515.3223023-3-vincent.whitchurch@axis.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-18tty: serial: bcm63xx: use more precise Kconfig symbolRafał Miłecki
Patches lowering SERIAL_BCM63XX dependencies led to a discussion and documentation change regarding "depends" usage. Adjust Kconfig entry to match current guidelines. Make this symbol available for relevant architectures only. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Ref: f35a07f92616 ("tty: serial: bcm63xx: lower driver dependencies") Ref: 18084e435ff6 ("Documentation/kbuild: Document platform dependency practises") Link: https://lore.kernel.org/r/20220311093233.10012-1-zajec5@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-18serial: SERIAL_SUNPLUS should depend on ARCH_SUNPLUSGeert Uytterhoeven
Sunplus serial ports are only present on Sunplus SoCs. Hence add a dependency on ARCH_SUNPLUS, to prevent asking the user about this driver when configuring a kernel without Sunplus SoC support. Fixes: 9e8d5470325f25be ("serial: sunplus-uart: Add Sunplus SoC UART Driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/59f46272ab5b16853acac4d585c3333cfd394223.1647352195.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-01Revert "tty: serial: meson: *"Greg Kroah-Hartman
This reverts the following commits: 31979060cc07 tty: serial: meson: Fix the compile link error reported by kernel test robot 5427c352a993 tty: serial: meson: Added S4 SOC compatibility 19b2ba0baffc tty: serial: meson: The system stuck when you run the stty command on the console to change the baud rate e5fc2b99840d tty: serial: meson: Make some bit of the REG5 register writable 44023b8e1f14 tty: serial: meson: Describes the calculation of the UART baud rate clock using a clock frame 6436dd8f9b25 tty: serial: meson: Use devm_ioremap_resource to get register mapped memory 841f913e770f tty: serial: meson: Move request the register region to probe They seem to cause lots of problems with existing hardware platforms, and caused build issues, so revert the whole series all at once. Link: https://lore.kernel.org/r/849a95fd-ae81-9a3b-0c06-dd7826af9eb2@baylibre.com Link: https://lore.kernel.org/all/20220225073922.3947-1-yu.tu@amlogic.com/ Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reported-by: Jerome Brunet <jbrunet@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Yu Tu <yu.tu@amlogic.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-28tty: serial: meson: Fix the compile link error reported by kernel test robotYu Tu
Describes the calculation of the UART baud rate clock using a clock frame. Forgot to add in Kconfig kernel test Robot compilation error due to COMMON_CLK dependency. Fixes: 44023b8e1f14 ("tty: serial: meson: Describes the calculation of the UART baud rate clock using a clock frame") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Yu Tu <yu.tu@amlogic.com> Link: https://lore.kernel.org/r/20220228064910.11636-1-yu.tu@amlogic.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 08:24:36 +0000