| Age | Commit message (Collapse) | Author |
|---|
|
Now that all of the mmsys routing tables have been fixed,
migrate all of them to use the MMSYS_ROUTE() macro: this
will make sure that future additions to any of the tables
for the currently supported SoCs are compile-time sanity
checked, greatly reducing room for (way too common) mistakes.
Link: https://lore.kernel.org/r/20250212100012.33001-8-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The mmsys driver reads the routing table and writes to the
hardware `val & mask`, but multiple entries in the mmsys
routing table for the MT8365 SoC are setting a 0x0 mask:
this effectively writes .. nothing .. to the hardware.
That would never work, and if the display controller was
actually working with the mmsys doing no routing at all,
that was only because the bootloader was correctly setting
the display controller routing registers before booting the
kernel, and the mmsys was never reset.
Make this table to actually set the routing by adding the
correct register masks to it.
While at it, also change MOUT val definitions to BIT(x), as
the MOUT registers are effectively checking for each bit to
enable output to the corresponding HW.
Please note that, for this SoC, only the MOUT registers are
checking bits (as those can enable multiple outputs), while
the others are purely reading a number to select an input.
Fixes: bc3fc5c05100 ("soc: mediatek: mmsys: add MT8365 support")
Link: https://lore.kernel.org/r/20250212100012.33001-7-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Right now only the DSI path connections are described in the mt8365
mmsys driver. The external path will be DPI/HDMI. This commit adds
the connections for DPI/HDMI.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://lore.kernel.org/r/20220530201436.902505-5-fparent@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
The mmsys routing table of mt8195 vdosys0 has 2 DITHER components,
so mmsys need to add DDP_COMPONENT_DITHER1 and change all usages of
DITHER enum form DDP_COMPONENT_DITHER to DDP_COMPONENT_DITHER0.
But its header need to keep DDP_COMPONENT_DITHER enum
until drm/mediatek also changed it.
Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220419094143.9561-7-jason-jh.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add DSI mmsys connections for the MT8365 SoC.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/20210519161847.3747352-3-fparent@baylibre.com
[mb: take the mask field into account]
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
