summaryrefslogtreecommitdiff
path: root/drivers/scsi/pm8001/pm80xx_hwi.c
AgeCommit message (Collapse)Author
2025-06-23scsi: pm80xx: Add controller SCSI host fatal error ueventsSalomon Dushimirimana
Add pm80xx_fatal_error_uevent_emit() which is called when the pm80xx driver encouters a fatal error. The uevent has the following additional custom key/value pair sets: - DRIVER: driver name, pm80xx in this case - HBA_NUM: the scsi host id of the device - EVENT_TYPE: to indicate a fatal error - REPORTED_BY: either driver or firmware The uevent is anchored to the kernel object that represents the SCSI controller, which includes other useful core variables, such as, ACTION, DEVPATH, SUBSYSTEM, and more. The fatal_error_uevent_emit() function is called when the controller fatal error state changes. Since this doesn't happen often for a specific SCSI host, there is no worries of a uevent storm. Signed-off-by: Salomon Dushimirimana <salomondush@google.com> Link: https://lore.kernel.org/r/20250616190018.2136260-1-salomondush@google.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-19scsi: pm80xx: Free allocated tags after failureFrancisco Gutierrez
This change frees resources after an error is detected. Signed-off-by: Francisco Gutierrez <frankramirez@google.com> Link: https://lore.kernel.org/r/20250617210443.989058-1-frankramirez@google.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: pm80xx: Improve debugging for aborted commandsVishakha Channapattan
Improves the debugging capabilities of the driver by adding more context to debug messages: 1. Introduce a new function to show pending commands. 2. Include the tag number in NCQ EH path debug messages. 3. Add logging for ata_tag along with pm80xx tag to map I/Os aborted with ATA logs. Signed-off-by: Vishakha Channapattan <vishakhavc@google.com> Signed-off-by: Salomon Dushimirimana <salomondush@google.com> Link: https://lore.kernel.org/r/20241126225546.975441-1-salomondush@google.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: pm80xx: Use dynamic tag numbers for PHY start and stopJolly Shah
Other commands were not aware if tag 0x01 was in use or not which meant multiple commands could share the same tag number. Prevent tag 0x01 from being used by multiple commands at the same time. Signed-off-by: Jolly Shah <jollys@google.com> Signed-off-by: Terrence Adams <tadamsjr@google.com> Link: https://lore.kernel.org/r/20241125213343.3272478-1-tadamsjr@google.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-11-06scsi: pm8001: Use module param to set pcs event log severitySalomon Dushimirimana
The pm8001 driver sets pcs event log threshold very high which causes most of the FW log messages to not be captured. Add a module parameter to configure pcs event log severity with 3 (medium severity) as the default. Co-developed-by: Bhavesh Jashnani <bjashnani@google.com> Signed-off-by: Bhavesh Jashnani <bjashnani@google.com> Signed-off-by: Salomon Dushimirimana <salomondush@google.com> Link: https://lore.kernel.org/r/20241016220944.370539-1-salomondush@google.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-09-12scsi: pm8001: Remove trailing space after \n newlineColin Ian King
There is a extraneous space after a newline in a pm8001_dbg message. Remove it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20240902141537.308914-1-colin.i.king@gmail.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-07-04scsi: pm8001: Update log level when reading config tableTerrence Adams
Reading the main config table occurs as a part of initialization in pm80xx_chip_init(). Because of this it makes more sense to have it be a part of the INIT logging. Signed-off-by: Terrence Adams <tadamsjr@google.com> Link: https://lore.kernel.org/r/20240627155924.2361370-3-tadamsjr@google.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-21scsi: pm8001: Remove PM8001_USE_MSIXDamien Le Moal
The pm8001 driver does not compile if PM8001_USE_MSIX is not defined in pm8001_sas.h because various fields and functions conditionally defined are used unconditionally without a "#ifdef PM8001_USE_MSIX" protection. This macro is rather useless anyway and not convenient as diabling MSI-X use requires recompiling the driver. Remove this macro and replace it with the bool module parameter "use_msix" which defaults to true. The use of MSI-X interrupts for an adapter is gated by this module parameter for adapters that actually support MSI-X. The "use_msix" boolean field is added to struct pm8001_hba_info and all code defined depending on PM8001_USE_MSIX is modified to rely on pm8001_hba_info->use_msix instead. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20230911232745.325149-9-dlemoal@kernel.org Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-21scsi: pm8001: Remove pm80xx_chip_intx_interrupt_enable/disable()Damien Le Moal
Remove the functions pm80xx_chip_intx_interrupt_enable() and pm80xx_chip_intx_interrupt_disable() and open code them respectively in pm80xx_chip_interrupt_enable() and pm80xx_chip_interrupt_disable(). Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20230911232745.325149-8-dlemoal@kernel.org Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-13scsi: pm80xx: Avoid leaking tags when processing ↵Michal Grzedzicki
OPC_INB_SET_CONTROLLER_CONFIG command Tags allocated for OPC_INB_SET_CONTROLLER_CONFIG command need to be freed when we receive the response. Signed-off-by: Michal Grzedzicki <mge@meta.com> Link: https://lore.kernel.org/r/20230911170340.699533-2-mge@meta.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-13scsi: pm80xx: Use phy-specific SAS address when sending PHY_START commandMichal Grzedzicki
Some cards have more than one SAS address. Using an incorrect address causes communication issues with some devices like expanders. Closes: https://lore.kernel.org/linux-kernel/A57AEA84-5CA0-403E-8053-106033C73C70@fb.com/ Signed-off-by: Michal Grzedzicki <mge@meta.com> Link: https://lore.kernel.org/r/20230913155611.3183612-1-mge@meta.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-08-24Merge patch series "libsas: Some tidy-up"Martin K. Petersen
John Garry <john.g.garry@oracle.com> says: This series tidies-up libsas a bit, including: - delete structure(s) with only one member - delete structure members which are only ever set - delete structure members which are never set and code which relies on that member being set This conflicts with the following series: https://lore.kernel.org/linux-scsi/20230809132249.37948-1-yuehaibing@huawei.com/ Any conflict should be trivial to resolve. Based on mkp-scsi staging at a18e81d17a7e ("scsi: ufs: ufs-pci: Add support for QEMU") Link: https://lore.kernel.org/r/20230815115156.343535-1-john.g.garry@oracle.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-08-21scsi: libsas: Delete sas_ssp_task.task_prioJohn Garry
Since libsas was introduced in commit 2908d778ab3e ("[SCSI] aic94xx: new driver"), sas_ssp_task.task_prio is never set, so delete it and any references which depend on it being set (all of them). Signed-off-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20230815115156.343535-8-john.g.garry@oracle.com Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-08-21scsi: libsas: Delete sas_ssp_task.enable_first_burstJohn Garry
Since libsas was introduced in commit 2908d778ab3e ("[SCSI] aic94xx: new driver"), sas_ssp_task.enable_first_burst is never set, so delete it and any references. Signed-off-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20230815115156.343535-7-john.g.garry@oracle.com Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-08-21scsi: pm80xx: Set RETFIS when requested by libsasIgor Pylypiv
By default PM80xx HBAs return FIS only when a drive reports an error. The RETFIS bit forces the controller to populate FIS even when a drive reports no error. Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Link: https://lore.kernel.org/r/20230819213040.1101044-3-ipylypiv@google.com Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-08scsi: pm80xx: Update PHY state after hard resetChangyuan Lyu
Update phy_attached, phy_state, and port_state to correct values after a hard rest. Without this patch, after a successful hard reset, phy_attached is still 0, as a result, any following hard reset will cause a PHY START to be issued first. Signed-off-by: Changyuan Lyu <changyuanl@google.com> Signed-off-by: Pranav Prasad <pranavpp@google.com> Link: https://lore.kernel.org/r/20230418190101.696345-7-pranavpp@google.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-08scsi: pm80xx: Log port state during HW eventAkshat Jain
Log port state during PHY_DOWN event to understand reasoning for PHY_DOWNs. Signed-off-by: Akshat Jain <akshatzen@google.com> Signed-off-by: Pranav Prasad <pranavpp@google.com> Link: https://lore.kernel.org/r/20230418190101.696345-6-pranavpp@google.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-08scsi: pm80xx: Log phy_id and port_id in the device registration requestAkshat Jain
Print phy_id and port_id sent as part of device registration request. Signed-off-by: Akshat Jain <akshatzen@google.com> Signed-off-by: Pranav Prasad <pranavpp@google.com> Link: https://lore.kernel.org/r/20230418190101.696345-5-pranavpp@google.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-08scsi: pm80xx: Print port_id in HW eventsAkshat Jain
Log port_id and phy_id along with the PHY_UP event. Signed-off-by: Akshat Jain <akshatzen@google.com> Signed-off-by: Pranav Prasad <pranavpp@google.com> Link: https://lore.kernel.org/r/20230418190101.696345-4-pranavpp@google.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-08scsi: pm80xx: Enable init loggingAkshat Jain
Enable init logging to debug drive discovery issues. Signed-off-by: Akshat Jain <akshatzen@google.com> Signed-off-by: Pranav Prasad <pranavpp@google.com> Link: https://lore.kernel.org/r/20230418190101.696345-3-pranavpp@google.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-08scsi: pm80xx: Log some HW events by defaultAkshat Jain
Log the following hw_event logs under EVENT log severity to help debug disk issues: HW_EVENT_LINK_ERR_INVALID_DWORD HW_EVENT_LINK_ERR_DISPARITY_ERROR HW_EVENT_LINK_ERR_CODE_VIOLATION HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH HW_EVENT_LINK_ERR_PHY_RESET_FAILED HW_EVENT_INBOUND_CRC_ERROR HW_EVENT_PHY_ERROR HW_EVENT_SAS_PHY_UP HW_EVENT_SATA_PHY_UP HW_EVENT_SATA_SPINUP_HOLD HW_EVENT_PHY_DOWN HW_EVENT_PORT_INVALID HW_EVENT_MALFUNCTION HW_EVENT_PORT_RESET_TIMER_TMO HW_EVENT_PORT_RECOVERY_TIMER_TMO HW_EVENT_HARD_RESET_RECEIVED HW_EVENT_ID_FRAME_TIMEOUT HW_EVENT_PORT_RECOVER Signed-off-by: Akshat Jain <akshatzen@google.com> Signed-off-by: Pranav Prasad <pranavpp@google.com> Link: https://lore.kernel.org/r/20230418190101.696345-2-pranavpp@google.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-10-22scsi: pm80xx: Remove unused reset_in_progress flag logicIgor Pylypiv
The reset_in_progress flag was never set. Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Link: https://lore.kernel.org/r/20221007230751.309363-1-ipylypiv@google.com Reviewed-by: Andrew Konecki <awkonecki@google.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-10-22scsi: pm8001: Use sas_task_find_rq() for taggingJohn Garry
The request associated with a SCSI command coming from the block layer has a unique tag, so use that when possible for getting a CCB. Unfortunately we don't support reserved commands in the SCSI midlayer yet, so in the interim continue to manage those tags internally (along with tags for private commands). Signed-off-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1666091763-11023-6-git-send-email-john.garry@huawei.com Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-10-18scsi: pm8001: Use sas_ata_device_link_abort() to handle NCQ errorsJohn Garry
In commit c6b9ef5779c3 ("[SCSI] pm80xx: NCQ error handling changes") the driver had support added to handle NCQ errors but much of what is done in this handling is duplicated from the libata EH. In that named commit we handle in 2x main steps: a. Issue read log ext10 to examine and clear the errors b. Issue SATA_ABORT all command Indeed, in libata EH, we do similar to above: a. ata_do_eh() -> ata_eh_autopsy() -> ata_eh_link_autopsy() -> ata_eh_analyze_ncq_error() -> ata_eh_read_log_10h() b. ata_do_eh() -> ata_eh_recover() which will issue a device soft reset or hard reset Since there is so much duplication, use sas_ata_device_link_abort() which will abort all pending IOs and kick of ATA EH which will do the steps, above. However we will not follow the advisory to send the SATA_ABORT all command after the autopsy in read log ext10. Indeed, in libsas EH, we already send a per-task SATA_ABORT command, and this is prior to the ATA EH kicking in and issuing the read log ext10 in the recovery process. I judge that this is ok as the SATA_ABORT command does not actually send any protocol on the link to abort I/O on the other side, so would not change any state on the disk (for the read log ext10 command). Signed-off-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1665998435-199946-7-git-send-email-john.garry@huawei.com Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Niklas Cassel <niklas.cassel@wdc.com> # pm80xx Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-10-18scsi: pm8001: Modify task abort handling for SATA taskJohn Garry
When we try to abort a SATA task, the CCB of the task which we are trying to avoid may still complete. In this case, we should not touch the task associated with that CCB as we can race with libsas freeing the last later in sas_eh_handle_sas_errors() -> sas_eh_finish_cmd() for when TASK_IS_ABORTED is returned from sas_scsi_find_task() Signed-off-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1665998435-199946-6-git-send-email-john.garry@huawei.com Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Niklas Cassel <niklas.cassel@wdc.com> # pm80xx Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-04Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, qla2xx, target, lpfc, smartpqi, mpi3mr). The main driver change that might cause issues on down the road is the conversion of some of our oldest surviving drivers to the DMA API (should only affect m68k). The only major core change is the rework of async resume; the rest are either completely trivial or for updating deprecated APIs" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (195 commits) scsi: target: Remove XDWRITEREAD emulated support scsi: megaraid: Remove the static variable initialisation scsi: ch: Do not initialise statics to 0 scsi: ufs: core: Fix spelling mistake "Cannnot" -> "Cannot" scsi: target: iscsi: Do not require target authentication scsi: target: iscsi: Allow AuthMethod=None scsi: target: iscsi: Support base64 in CHAP scsi: target: iscsi: Add support for extended CDB AHS scsi: ufs: dt-bindings: Add SC8280XP binding scsi: target: iscsi: Fix clang -Wformat warnings scsi: ufs: core: Read device property for ref clock scsi: libsas: Resume SAS host for phy reset or enable via sysfs scsi: hisi_sas: Modify v3 HW SATA completion error processing scsi: hisi_sas: Relocate DMA unmap of SMP task scsi: hisi_sas: Remove unnecessary variable to hold DMA map elements scsi: hisi_sas: Call hisi_sas_slave_configure() from slave_configure_v3_hw() scsi: mpi3mr: Delete a stray tab scsi: mpi3mr: Unlock on error path scsi: mpi3mr: Reduce VD queue depth on detecting throttling scsi: mpi3mr: Resource Based Metering ...
2022-07-13scsi: pm80xx: Set stopped phy's linkrate to DisabledChangyuan Lyu
Negotiated link rate needs to be updated to 'Disabled' when phy is stopped. Link: https://lore.kernel.org/r/20220708205026.969161-1-changyuanl@google.com Reviewed-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Changyuan Lyu <changyuanl@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: pm8001: Expose hardware queues for pm80xxJohn Garry
In commit 05c6c029a44d ("scsi: pm80xx: Increase number of supported queues"), support for 80xx chip was improved by enabling multiple HW queues. In this, like other SCSI MQ HBA drivers at the time, the HW queues were not exposed to upper layer, and instead the driver managed the queues internally. However, this management duplicates blk-mq code. In addition, the HW queue management is sub-optimal for a system where the number of CPUs exceeds the HW queues - this is because queues are selected in a round-robin fashion, when it would be better to make adjacent CPUs submit on the same queue. And finally, the affinity of the completion queue interrupts is not set to mirror the cpu<->HQ queue mapping, which is suboptimal. As such, for when MSIX is supported, expose HW queues to upper layer. We always use queue index #0 for "internal" commands, i.e. anything which does not come from the block layer, so omit this from the affinity spreading. Link: https://lore.kernel.org/r/1654879602-33497-5-git-send-email-john.garry@huawei.com Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: pm8001: Set up tags before using themJohn Garry
The current code is buggy in that the tags are set up after they are needed in pm80xx_chip_init() -> pm80xx_set_sas_protocol_timer_config(). The tag depth is earlier read in pm80xx_chip_init() -> read_main_config_table(). Add a post init callback to do the pm80xx work which needs to be done after reading the tags. I don't see a better way to do this. Link: https://lore.kernel.org/r/1654879602-33497-3-git-send-email-john.garry@huawei.com Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-11scsi: pm80xx: Enable upper inbound, outbound queuesAjish Koshy
Executing driver on servers with more than 32 CPUs were faced with command timeouts. This is because we were not geting completions for commands submitted on IQ32 - IQ63. Set E64Q bit to enable upper inbound and outbound queues 32 to 63 in the MPI main configuration table. Added 500ms delay after successful MPI initialization as mentioned in controller datasheet. Link: https://lore.kernel.org/r/20220411064603.668448-3-Ajish.Koshy@microchip.com Fixes: 05c6c029a44d ("scsi: pm80xx: Increase number of supported queues") Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-11scsi: pm80xx: Mask and unmask upper interrupt vectors 32-63Ajish Koshy
When upper inbound and outbound queues 32-63 are enabled, we see upper vectors 32-63 in interrupt service routine. We need corresponding registers to handle masking and unmasking of these upper interrupts. To achieve this, we use registers MSGU_ODMR_U(0x34) to mask and MSGU_ODMR_CLR_U(0x3C) to unmask the interrupts. In these registers bit 0-31 represents interrupt vectors 32-63. Link: https://lore.kernel.org/r/20220411064603.668448-2-Ajish.Koshy@microchip.com Fixes: 05c6c029a44d ("scsi: pm80xx: Increase number of supported queues") Reviewed-by: John Garry <john.garry@huawei.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-27scsi: pm80xx: Handle non-fatal errorsAjish Koshy
Firmware expects host driver to clear scratchpad rsvd 0 register after non-fatal error is found. This is done when firmware raises fatal error interrupt and indicates non-fatal error. At this point firmware updates scratchpad rsvd 0 register with non-fatal error value. Here host has to clear the register after reading it during non-fatal errors. Rename: - MSGU_HOST_SCRATCH_PAD_6 to MSGU_SCRATCH_PAD_RSVD_0 - MSGU_HOST_SCRATCH_PAD_7 to MSGU_SCRATCH_PAD_RSVD_1 Link: https://lore.kernel.org/r/20220222092618.108198-1-Ajish.Koshy@microchip.com Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Improve pm80XX_send_abort_all()Damien Le Moal
Both pm8001_send_abort_all() and pm80xx_send_abort_all() are called only for a non null device with the NCQ_READ_LOG_FLAG set, so remove the device check on entry of these functions. Furthermore, setting the NCQ_ABORT_ALL_FLAG device id flag and clearing the NCQ_READ_LOG_FLAG is always done before calling these functions. Move these operations inside the functions. Link: https://lore.kernel.org/r/20220220031810.738362-31-damien.lemoal@opensource.wdc.com Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Simplify pm8001_ccb_task_free()Damien Le Moal
The task argument of the pm8001_ccb_task_free() function can be inferred from the ccb argument ccb_task field. So there is no need to have this argument. Likewise, the ccb_index argument is always equal to the ccb tag field and is not needed either. Remove both arguments and update all call sites. The pm8001_ccb_task_free_done() helper is also modified to match this change. Link: https://lore.kernel.org/r/20220220031810.738362-30-damien.lemoal@opensource.wdc.com Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Simplify pm8001_mpi_build_cmd() interfaceDamien Le Moal
There is no need to pass a pointer to a struct inbound_queue_table to pm8001_mpi_build_cmd(). Passing the start index in the inbound queue table of the adapter is enough. This change allows avoiding the declaration of a struct inbound_queue_table pointer (circularQ variables) in many functions, simplifying the code. While at it, blank lines are added i(e.g. after local variable declarations) to make the code more readable. Link: https://lore.kernel.org/r/20220220031810.738362-28-damien.lemoal@opensource.wdc.com Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Introduce ccb alloc/free helpersDamien Le Moal
Introduce the pm8001_ccb_alloc() and pm8001_ccb_free() helpers to replace the typical code patterns: res = pm8001_tag_alloc(pm8001_ha, &ccb_tag); if (res) ... ccb = &pm8001_ha->ccb_info[ccb_tag]; ccb->device = pm8001_ha_dev; ccb->ccb_tag = ccb_tag; ccb->task = task; ccb->n_elem = 0; and ccb->task = NULL; ccb->ccb_tag = PM8001_INVALID_TAG; pm8001_tag_free(pm8001_ha, tag); With the simpler function calls: ccb = pm8001_ccb_alloc(pm8001_ha, pm8001_ha_dev, task); if (!ccb) ... and pm8001_ccb_free(pm8001_ha, ccb); The pm8001_ccb_alloc() helper ensures that all fields of the ccb info structure for the newly allocated tag are all initialized, except the buf_prd field. The pm8001_ccb_free() helper clears the initialized fields and the ccb tag to ensure that iteration over the adapter ccb_info array detects ccbs that are in use. All call site of the pm8001_tag_alloc() function that use a ccb info associated with an allocated tag are converted to use the new helpers. Link: https://lore.kernel.org/r/20220220031810.738362-27-damien.lemoal@opensource.wdc.com Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix tag leaks on errorDamien Le Moal
In pm8001_chip_set_dev_state_req(), pm8001_chip_fw_flash_update_req(), pm80xx_chip_phy_ctl_req() and pm8001_chip_reg_dev_req() add missing calls to pm8001_tag_free() to free the allocated tag when pm8001_mpi_build_cmd() fails. Similarly, in pm8001_exec_internal_task_abort(), if the chip ->task_abort method fails, the tag allocated for the abort request task must be freed. Add the missing call to pm8001_tag_free(). Link: https://lore.kernel.org/r/20220220031810.738362-22-damien.lemoal@opensource.wdc.com Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix tag values handlingDamien Le Moal
The function pm8001_tag_alloc() determines free tags using the function find_first_zero_bit() which can return 0 when the first bit of the bitmap being inspected is 0. As such, tag 0 is a valid tag value that should not be dismissed as invalid. Fix the functions pm8001_work_fn(), mpi_sata_completion(), pm8001_mpi_task_abort_resp() and pm8001_open_reject_retry() to not dismiss 0 tags as invalid. The value 0xffffffff is used for invalid tags for unused ccb information structures. Add the macro definition PM8001_INVALID_TAG to define this value. Link: https://lore.kernel.org/r/20220220031810.738362-20-damien.lemoal@opensource.wdc.com Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix pm8001_tag_alloc() failures handlingDamien Le Moal
In mpi_set_phy_profile_req() and in pm8001_set_phy_profile_single(), if pm8001_tag_alloc() fails to allocate a new tag, a warning message is issued but the uninitialized tag variable is still used to build a command. Avoid this by returning early in case of tag allocation failure. Also make sure to always return the error code returned by pm8001_tag_alloc() when this function fails instead of an arbitrary value. Link: https://lore.kernel.org/r/20220220031810.738362-18-damien.lemoal@opensource.wdc.com Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix abort all task initializationDamien Le Moal
In pm80xx_send_abort_all(), the n_elem field of the ccb used is not initialized to 0. This missing initialization sometimes lead to the task completion path seeing the ccb with a non-zero n_elem resulting in the execution of invalid dma_unmap_sg() calls in pm8001_ccb_task_free(), causing a crash such as: [ 197.676341] RIP: 0010:iommu_dma_unmap_sg+0x6d/0x280 [ 197.700204] RSP: 0018:ffff889bbcf89c88 EFLAGS: 00010012 [ 197.705485] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff83d0bda0 [ 197.712687] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffff88810dffc0d0 [ 197.719887] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff8881c790098b [ 197.727089] R10: ffffed1038f20131 R11: 0000000000000001 R12: 0000000000000000 [ 197.734296] R13: ffff88810dffc0d0 R14: 0000000000000010 R15: 0000000000000000 [ 197.741493] FS: 0000000000000000(0000) GS:ffff889bbcf80000(0000) knlGS:0000000000000000 [ 197.749659] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 197.755459] CR2: 00007f16c1b42734 CR3: 0000000004814000 CR4: 0000000000350ee0 [ 197.762656] Call Trace: [ 197.765127] <IRQ> [ 197.767162] pm8001_ccb_task_free+0x5f1/0x820 [pm80xx] [ 197.772364] ? do_raw_spin_unlock+0x54/0x220 [ 197.776680] pm8001_mpi_task_abort_resp+0x2ce/0x4f0 [pm80xx] [ 197.782406] process_oq+0xe85/0x7890 [pm80xx] [ 197.786817] ? lock_acquire+0x194/0x490 [ 197.790697] ? handle_irq_event+0x10e/0x1b0 [ 197.794920] ? mpi_sata_completion+0x2d70/0x2d70 [pm80xx] [ 197.800378] ? __wake_up_bit+0x100/0x100 [ 197.804340] ? lock_is_held_type+0x98/0x110 [ 197.808565] pm80xx_chip_isr+0x94/0x130 [pm80xx] [ 197.813243] tasklet_action_common.constprop.0+0x24b/0x2f0 [ 197.818785] __do_softirq+0x1b5/0x82d [ 197.822485] ? do_raw_spin_unlock+0x54/0x220 [ 197.826799] __irq_exit_rcu+0x17e/0x1e0 [ 197.830678] irq_exit_rcu+0xa/0x20 [ 197.834114] common_interrupt+0x78/0x90 [ 197.840051] </IRQ> [ 197.844236] <TASK> [ 197.848397] asm_common_interrupt+0x1e/0x40 Avoid this issue by always initializing the ccb n_elem field to 0 in pm8001_send_abort_all(), pm8001_send_read_log() and pm80xx_send_abort_all(). Link: https://lore.kernel.org/r/20220220031810.738362-17-damien.lemoal@opensource.wdc.com Fixes: c6b9ef5779c3 ("[SCSI] pm80xx: NCQ error handling changes") Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix NCQ NON DATA command completion handlingDamien Le Moal
NCQ NON DATA is an NCQ command with the DMA_NONE DMA direction and so a register-device-to-host-FIS response is expected for it. However, for an IO_SUCCESS case, mpi_sata_completion() expects a set-device-bits-FIS for any ata task with an use_ncq field true, which includes NCQ NON DATA commands. Fix this to correctly treat NCQ NON DATA commands as non-data by also testing for the DMA_NONE DMA direction. Link: https://lore.kernel.org/r/20220220031810.738362-16-damien.lemoal@opensource.wdc.com Fixes: dbf9bfe61571 ("[SCSI] pm8001: add SAS/SATA HBA driver") Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix NCQ NON DATA command task initializationDamien Le Moal
In the pm8001_chip_sata_req() and pm80xx_chip_sata_req() functions, all tasks with a DMA direction of DMA_NONE (no data transfer) are initialized using the ATAP value 0x04. However, NCQ NON DATA commands, while being DMA_NONE commands are NCQ commands and need to be initialized using the value 0x07 for ATAP, similarly to other NCQ commands. Make sure that NCQ NON DATA command tasks are initialized similarly to other NCQ commands by also testing the task "use_ncq" field in addition to the DMA direction. While at it, reorganize the code into a chain of if - else if - else to avoid useless affectations and debug messages. Link: https://lore.kernel.org/r/20220220031810.738362-15-damien.lemoal@opensource.wdc.com Fixes: dbf9bfe61571 ("[SCSI] pm8001: add SAS/SATA HBA driver") Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix use of struct set_phy_profile_req fieldsDamien Le Moal
In mpi_set_phy_profile_req() and pm8001_set_phy_profile_single(), use cpu_to_le32() to initialize the ppc_phyid field of struct set_phy_profile_req. Furthermore, fix the definition of the reserved field of this structure to be an array of __le32, to match the use of cpu_to_le32() when assigning values. These changes remove several sparse type warnings. Link: https://lore.kernel.org/r/20220220031810.738362-13-damien.lemoal@opensource.wdc.com Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix le32 values handling in pm80xx_chip_sata_req()Damien Le Moal
Make sure that the __le32 fields of struct sata_cmd are manipulated after applying the correct endian conversion. That is, use cpu_to_le32() for assigning values and le32_to_cpu() for consulting a field value. In particular, make sure that the calculations for the 4G boundary check are done using CPU endianness and *not* little endian values. With these fixes, many sparse warnings are removed. While at it, fix some code identation and add blank lines after variable declarations and in some other places to make this code more readable. Link: https://lore.kernel.org/r/20220220031810.738362-12-damien.lemoal@opensource.wdc.com Fixes: 0ecdf00ba6e5 ("[SCSI] pm80xx: 4G boundary fix.") Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix le32 values handling in pm80xx_chip_ssp_io_req()Damien Le Moal
Make sure that the __le32 fields of struct ssp_ini_io_start_req are manipulated after applying the correct endian conversion. That is, use cpu_to_le32() for assigning values and le32_to_cpu() for consulting a field value. In particular, make sure that the calculations for the 4G boundary check are done using CPU endianness and *not* little endian values. With these fixes, many sparse warnings are removed. While at it, add blank lines after variable declarations and in some other places to make this code more readable. Link: https://lore.kernel.org/r/20220220031810.738362-11-damien.lemoal@opensource.wdc.com Fixes: 0ecdf00ba6e5 ("[SCSI] pm80xx: 4G boundary fix.") Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix payload initialization in pm80xx_encrypt_update()Damien Le Moal
All fields of the kek_mgmt_req structure have the type __le32. So make sure to use cpu_to_le32() to initialize them. This suppresses the sparse warning: warning: incorrect type in assignment (different base types) expected restricted __le32 [addressable] [assigned] [usertype] new_curidx_ksop got int Link: https://lore.kernel.org/r/20220220031810.738362-10-damien.lemoal@opensource.wdc.com Fixes: f5860992db55 ("[SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant changes in common files") Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix le32 values handling in pm80xx_set_sas_protocol_timer_config()Damien Le Moal
All fields of the SASProtocolTimerConfig structure have the __le32 type. As such, use cpu_to_le32() to initialize them. This change suppresses many sparse warnings: warning: incorrect type in assignment (different base types) expected restricted __le32 [addressable] [usertype] pageCode got int Note that the check to limit the value of the STP_IDLE_TMO field is removed as this field is initialized using the fixed (and small) value defined by the STP_IDLE_TIME macro. The pm8001_dbg() calls printing the values of the SASProtocolTimerConfig structure fileds are changed to use le32_to_cpu() to present the values in human readable form. Link: https://lore.kernel.org/r/20220220031810.738362-9-damien.lemoal@opensource.wdc.com Fixes: a6cb3d012b98 ("[SCSI] pm80xx: thermal, sas controller config and error handling update") Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix payload initialization in pm80xx_set_thermal_config()Damien Le Moal
The fields of the set_ctrl_cfg_req structure have the __le32 type, so use cpu_to_le32() to assign them. This removes the sparse warnings: warning: incorrect type in assignment (different base types) expected restricted __le32 got unsigned int Link: https://lore.kernel.org/r/20220220031810.738362-8-damien.lemoal@opensource.wdc.com Fixes: 842784e0d15b ("pm80xx: Update For Thermal Page Code") Fixes: f5860992db55 ("[SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant changes in common files") Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix pm80xx_pci_mem_copy() interfaceDamien Le Moal
The declaration of the local variable destination1 in pm80xx_pci_mem_copy() as a pointer to a u32 results in the sparse warning: warning: incorrect type in assignment (different base types) expected unsigned int [usertype] got restricted __le32 [usertype] Furthermore, the destination" argument of pm80xx_pci_mem_copy() is wrongly declared with the const attribute. Fix both problems by changing the type of the "destination" argument to "__le32 *" and use this argument directly inside the pm80xx_pci_mem_copy() function, thus removing the need for the destination1 local variable. Link: https://lore.kernel.org/r/20220220031810.738362-6-damien.lemoal@opensource.wdc.com Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix command initialization in pm80XX_send_read_log()Damien Le Moal
Since the sata_cmd struct is zeroed out before its fields are initialized, there is no need for using "|=" to initialize the ncqtag_atap_dir_m field. Using a standard assignment removes the sparse warning: warning: invalid assignment: |= Also, since the ncqtag_atap_dir_m field has type __le32, use cpu_to_le32() to generate the assigned value. Link: https://lore.kernel.org/r/20220220031810.738362-5-damien.lemoal@opensource.wdc.com Fixes: c6b9ef5779c3 ("[SCSI] pm80xx: NCQ error handling changes") Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 07:21:57 +0000