| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Standardize on the __ASSEMBLER__ macro that is provided by GCC and
Clang compilers and replace __ASSEMBLY__ with __ASSEMBLER__ in both
uapi and non-uapi headers
- Explicitly include <linux/export.h> in architecture and driver files
which contain an EXPORT_SYMBOL() and remove the include from the
files which do not contain the EXPORT_SYMBOL()
- Use the full title of "z/Architecture Principles of Operation" manual
and the name of a section where facility bits are listed
- Use -D__DISABLE_EXPORTS for files in arch/s390/boot to avoid
unnecessary slowing down of the build and confusing external kABI
tools that process symtypes data
- Print additional unrecoverable machine check information to make the
root cause analysis easier
- Move cmpxchg_user_key() handling to uaccess library code, since the
generated code is large anyway and there is no benefit if it is
inlined
- Fix a problem when cmpxchg_user_key() is executing a code with a
non-default key: if a system is IPL-ed with "LOAD NORMAL", and the
previous system used storage keys where the fetch-protection bit was
set for some pages, and the cmpxchg_user_key() is located within such
page, a protection exception happens
- Either the external call or emergency signal order is used to send an
IPI to a remote CPU. Use the external order only, since it is at
least as good and sometimes even better, than the emergency signal
- In case of an early crash the early program check handler prints more
or less random value of the last breaking event address, since it is
not initialized properly. Copy the last breaking event address from
the lowcore to pt_regs to address this
- During STP synchronization check udelay() can not be used, since the
first CPU modifies tod_clock_base and get_tod_clock_monotonic() might
return a non-monotonic time. Instead, busy-loop on other CPUs, while
the the first CPU actually handles the synchronization operation
- When debugging the early kernel boot using QEMU with the -S flag and
GDB attached, skip the decompressor and start directly in kernel
- Rename PAI Crypto event 4210 according to z16 and z17 "z/Architecture
Principles of Operation" manual
- Remove the in-kernel time steering support in favour of the new s390
PTP driver, which allows the kernel clock steered more precisely
- Remove a possible false-positive warning in pte_free_defer(), which
could be triggered in a valid case KVM guest process is initializing
* tag 's390-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (29 commits)
s390/mm: Remove possible false-positive warning in pte_free_defer()
s390/stp: Default to enabled
s390/stp: Remove leap second support
s390/time: Remove in-kernel time steering
s390/sclp: Use monotonic clock in sclp_sync_wait()
s390/smp: Use monotonic clock in smp_emergency_stop()
s390/time: Use monotonic clock in get_cycles()
s390/pai_crypto: Rename PAI Crypto event 4210
scripts/gdb/symbols: make lx-symbols skip the s390 decompressor
s390/boot: Introduce jump_to_kernel() function
s390/stp: Remove udelay from stp_sync_clock()
s390/early: Copy last breaking event address to pt_regs
s390/smp: Remove conditional emergency signal order code usage
s390/uaccess: Merge cmpxchg_user_key() inline assemblies
s390/uaccess: Prevent kprobes on cmpxchg_user_key() functions
s390/uaccess: Initialize code pages executed with non-default access key
s390/skey: Provide infrastructure for executing with non-default access key
s390/uaccess: Make cmpxchg_user_key() library code
s390/page: Add memory clobber to page_set_storage_key()
s390/page: Cleanup page_set_storage_key() inline assemblies
...
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc8).
Conflicts:
drivers/net/ethernet/microsoft/mana/gdma_main.c
9669ddda18fb ("net: mana: Fix warnings for missing export.h header inclusion")
755391121038 ("net: mana: Allocate MSI-X vectors dynamically")
https://lore.kernel.org/20250711130752.23023d98@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/ti/icssg/icssg_prueth.h
6e86fb73de0f ("net: ti: icssg-prueth: Fix buffer allocation for ICSSG")
ffe8a4909176 ("net: ti: icssg-prueth: Read firmware-names from device tree")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The s390x ISM device data sheet clearly states that only one
request-response sequence is allowable per ISM function at any point in
time. Unfortunately as of today the s390/ism driver in Linux does not
honor that requirement. This patch aims to rectify that.
This problem was discovered based on Aliaksei's bug report which states
that for certain workloads the ISM functions end up entering error state
(with PEC 2 as seen from the logs) after a while and as a consequence
connections handled by the respective function break, and for future
connection requests the ISM device is not considered -- given it is in a
dysfunctional state. During further debugging PEC 3A was observed as
well.
A kernel message like
[ 1211.244319] zpci: 061a:00:00.0: Event 0x2 reports an error for PCI function 0x61a
is a reliable indicator of the stated function entering error state
with PEC 2. Let me also point out that a kernel message like
[ 1211.244325] zpci: 061a:00:00.0: The ism driver bound to the device does not support error recovery
is a reliable indicator that the ISM function won't be auto-recovered
because the ISM driver currently lacks support for it.
On a technical level, without this synchronization, commands (inputs to
the FW) may be partially or fully overwritten (corrupted) by another CPU
trying to issue commands on the same function. There is hard evidence that
this can lead to DMB token values being used as DMB IOVAs, leading to
PEC 2 PCI events indicating invalid DMA. But this is only one of the
failure modes imaginable. In theory even completely losing one command
and executing another one twice and then trying to interpret the outputs
as if the command we intended to execute was actually executed and not
the other one is also possible. Frankly, I don't feel confident about
providing an exhaustive list of possible consequences.
Fixes: 684b89bc39ce ("s390/ism: add device driver for internal shared memory")
Reported-by: Aliaksei Makarau <Aliaksei.Makarau@ibm.com>
Tested-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Tested-by: Aliaksei Makarau <Aliaksei.Makarau@ibm.com>
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250722161817.1298473-1-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Update qeth driver to allow writing an existing value to the "hw_trap"
sysfs attribute. Attempting such a write earlier resulted in -EINVAL.
In other words, make the sysfs attribute idempotent.
After:
$ cat hw_trap
disarm
$ echo disarm > hw_trap
$
Suggested-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Aswin Karuvally <aswin@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250718141711.1141049-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The netiucv driver creates TCP/IP interfaces over IUCV between Linux
guests on z/VM and other z/VM entities.
Rationale for removal:
- NETIUCV connections are only supported for compatibility with
earlier versions and not to be used for new network setups,
since at least Linux kernel 4.0.
- No known active users, use cases, or product dependencies
- The driver is no longer relevant for z/VM networking;
preferred methods include:
* Device pass-through (e.g., OSA, RoCE)
* z/VM Virtual Switch (VSWITCH)
The IUCV mechanism itself remains supported and is actively used
via AF_IUCV, hvc_iucv, and smsg_iucv.
Signed-off-by: Nagamani PV <nagamani@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250715074210.3999296-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Explicitly include <linux/export.h> in files which contain an
EXPORT_SYMBOL().
See commit a934a57a42f6 ("scripts/misc-check: check missing #include
<linux/export.h> when W=1") for more details.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
|
|
Convert all strcpy() usages to strscpy() where the conversion means
just replacing strcpy() with strscpy(). strcpy() is deprecated since
it performs no bounds checking on the destination buffer.
Reviewed-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
GCC 14.2.0 reports that passing a non-string literal as the
format argument of dev_set_name() is potentially insecure.
drivers/s390/net/ism_drv.c: In function 'ism_probe':
drivers/s390/net/ism_drv.c:615:2: warning: format not a string literal and no format arguments [-Wformat-security]
615 | dev_set_name(&ism->dev, dev_name(&pdev->dev));
| ^~~~~~~~~~~~
It seems to me that as pdev is a PCIE device then the dev_name
call above should always return the device's BDF, e.g. 00:12.0.
That this should not contain format escape sequences. And thus
the current usage is safe.
But, it seems better to be safe than sorry. And, as a bonus, compiler
output becomes less verbose by addressing this issue.
Compile tested only.
No functional change intended.
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250417-ism-str-fmt-v1-1-9818b029874d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Add sorting of mcount locations at build time
- Rework uaccess functions with C exception handling to shorten inline
assembly size and enable full inlining. This yields near-optimal code
for small constant copies with a ~40kb kernel size increase
- Add support for a configurable STRICT_MM_TYPECHECKS which allows to
generate better code, but also allows to have type checking for debug
builds
- Optimize get_lowcore() for common callers with alternatives that
nearly revert to the pre-relocated lowcore code, while also slightly
reducing syscall entry and exit time
- Convert MACHINE_HAS_* checks for single facility tests into cpu_has_*
style macros that call test_facility(), and for features with
additional conditions, add a new ALT_TYPE_FEATURE alternative to
provide a static branch via alternative patching. Also, move machine
feature detection to the decompressor for early patching and add
debugging functionality to easily show which alternatives are patched
- Add exception table support to early boot / startup code to get rid
of the open coded exception handling
- Use asm_inline for all inline assemblies with EX_TABLE or ALTERNATIVE
to ensure correct inlining and unrolling decisions
- Remove 2k page table leftovers now that s390 has been switched to
always allocate 4k page tables
- Split kfence pool into 4k mappings in arch_kfence_init_pool() and
remove the architecture-specific kfence_split_mapping()
- Use READ_ONCE_NOCHECK() in regs_get_kernel_stack_nth() to silence
spurious KASAN warnings from opportunistic ftrace argument tracing
- Force __atomic_add_const() variants on s390 to always return void,
ensuring compile errors for improper usage
- Remove s390's ioremap_wt() and pgprot_writethrough() due to
mismatched semantics and lack of known users, relying on asm-generic
fallbacks
- Signal eventfd in vfio-ap to notify userspace when the guest AP
configuration changes, including during mdev removal
- Convert mdev_types from an array to a pointer in vfio-ccw and vfio-ap
drivers to avoid fake flex array confusion
- Cleanup trap code
- Remove references to the outdated linux390@de.ibm.com address
- Other various small fixes and improvements all over the code
* tag 's390-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (78 commits)
s390: Use inline qualifier for all EX_TABLE and ALTERNATIVE inline assemblies
s390/kfence: Split kfence pool into 4k mappings in arch_kfence_init_pool()
s390/ptrace: Avoid KASAN false positives in regs_get_kernel_stack_nth()
s390/boot: Ignore vmlinux.map
s390/sysctl: Remove "vm/allocate_pgste" sysctl
s390: Remove 2k vs 4k page table leftovers
s390/tlb: Use mm_has_pgste() instead of mm_alloc_pgste()
s390/lowcore: Use lghi instead llilh to clear register
s390/syscall: Merge __do_syscall() and do_syscall()
s390/spinlock: Implement SPINLOCK_LOCKVAL with inline assembly
s390/smp: Implement raw_smp_processor_id() with inline assembly
s390/current: Implement current with inline assembly
s390/lowcore: Use inline qualifier for get_lowcore() inline assembly
s390: Move s390 sysctls into their own file under arch/s390
s390/syscall: Simplify syscall_get_arguments()
s390/vfio-ap: Notify userspace that guest's AP config changed when mdev removed
s390: Remove ioremap_wt() and pgprot_writethrough()
s390/mm: Add configurable STRICT_MM_TYPECHECKS
s390/mm: Convert pgste_val() into function
s390/mm: Convert pgprot_val() into function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Enable Configuration RRS SV, which makes device readiness visible,
early instead of during child bus scanning (Bjorn Helgaas)
- Log debug messages about reset methods being used (Bjorn Helgaas)
- Avoid reset when it has been disabled via sysfs (Nishanth
Aravamudan)
- Add common pci-ep-bus.yaml schema for exporting several peripherals
of a single PCI function via devicetree (Andrea della Porta)
- Create DT nodes for PCI host bridges to enable loading device tree
overlays to create platform devices for PCI devices that have
several features that require multiple drivers (Herve Codina)
Resource management:
- Enlarge devres table[] to accommodate bridge windows, ROM, IOV
BARs, etc., and validate BAR index in devres interfaces (Philipp
Stanner)
- Fix typo that repeatedly distributed resources to a bridge instead
of iterating over subordinate bridges, which resulted in too little
space to assign some BARs (Kai-Heng Feng)
- Relax bridge window tail sizing for optional resources, e.g., IOV
BARs, to avoid failures when removing and re-adding devices (Ilpo
Järvinen)
- Allow drivers to enable devices even if we haven't assigned
optional IOV resources to them (Ilpo Järvinen)
- Rework handling of optional resources (IOV BARs, ROMs) to reduce
failures if we can't allocate them (Ilpo Järvinen)
- Fix a NULL dereference in the SR-IOV VF creation error path (Shay
Drory)
- Fix s390 mmio_read/write syscalls, which didn't cause page faults
in some cases, which broke vfio-pci lazy mapping on first access
(Niklas Schnelle)
- Add pdev->non_mappable_bars to replace CONFIG_VFIO_PCI_MMAP, which
was disabled only for s390 (Niklas Schnelle)
- Support mmap of PCI resources on s390 except for ISM devices
(Niklas Schnelle)
ASPM:
- Delay pcie_link_state deallocation to avoid dangling pointers that
cause invalid references during hot-unplug (Daniel Stodden)
Power management:
- Allow PCI bridges to go to D3Hot when suspending on all non-x86
systems (Manivannan Sadhasivam)
Power control:
- Create pwrctrl devices in pci_scan_device() to make it more
symmetric with pci_pwrctrl_unregister() and make pwrctrl devices
for PCI bridges possible (Manivannan Sadhasivam)
- Unregister pwrctrl devices in pci_destroy_dev() so DOE, ASPM, etc.
can still access devices after pci_stop_dev() (Manivannan
Sadhasivam)
- If there's a pwrctrl device for a PCI device, skip scanning it
because the pwrctrl core will rescan the bus after the device is
powered on (Manivannan Sadhasivam)
- Add a pwrctrl driver for PCI slots based on voltage regulators
described via devicetree (Manivannan Sadhasivam)
Bandwidth control:
- Add set_pcie_speed.sh to TEST_PROGS to fix issue when executing the
set_pcie_cooling_state.sh test case (Yi Lai)
- Avoid a NULL pointer dereference when we run out of bus numbers to
assign for a bridge secondary bus (Lukas Wunner)
Hotplug:
- Drop superfluous pci_hotplug_slot_list, try_module_get() calls, and
NULL pointer checks (Lukas Wunner)
- Drop shpchp module init/exit logging, replace shpchp dbg() with
ctrl_dbg(), and remove unused dbg(), err(), info(), warn() wrappers
(Ilpo Järvinen)
- Drop 'shpchp_debug' module parameter in favor of standard dynamic
debugging (Ilpo Järvinen)
- Drop unused cpcihp .get_power(), .set_power() function pointers
(Guilherme Giacomo Simoes)
- Disable hotplug interrupts in portdrv only when pciehp is not
enabled to avoid issuing two hotplug commands too close together
(Feng Tang)
- Skip pciehp 'device replaced' check if the device has been removed
to address a deadlock when resuming after a device was removed
during system sleep (Lukas Wunner)
- Don't enable pciehp hotplug interupt when resuming in poll mode
(Ilpo Järvinen)
Virtualization:
- Fix bugs in 'pci=config_acs=' kernel command line parameter (Tushar
Dave)
DOE:
- Expose supported DOE features via sysfs (Alistair Francis)
- Allow DOE support to be enabled even if CXL isn't enabled (Alistair
Francis)
Endpoint framework:
- Convert PCI device data so pci-epf-test works correctly on
big-endian endpoint systems (Niklas Cassel)
- Add BAR_RESIZABLE type to endpoint framework and add DWC core
support for EPF drivers to set BAR_RESIZABLE type and size (Niklas
Cassel)
- Fix pci-epf-test double free that causes an oops if the host
reboots and PERST# deassertion restarts endpoint BAR allocation
(Christian Bruel)
- Fix endpoint BAR testing so tests can skip disabled BARs instead of
reporting them as failures (Niklas Cassel)
- Widen endpoint test BAR size variable to accommodate BARs larger
than INT_MAX (Niklas Cassel)
- Remove unused tools 'pci' build target left over after moving tests
to tools/testing/selftests/pci_endpoint (Jianfeng Liu)
Altera PCIe controller driver:
- Add DT binding and driver support for Agilex family (P-Tile,
F-Tile, R-Tile) (Matthew Gerlach and D M, Sharath Kumar)
AMD MDB PCIe controller driver:
- Add DT binding and driver for AMD MDB (Multimedia DMA Bridge)
(Thippeswamy Havalige)
Broadcom STB PCIe controller driver:
- Add BCM2712 MSI-X DT binding and interrupt controller drivers and
add softdep on irq_bcm2712_mip driver to ensure that it is loaded
first (Stanimir Varbanov)
- Expand inbound window map to 64GB so it can accommodate BCM2712
(Stanimir Varbanov)
- Add BCM2712 support and DT updates (Stanimir Varbanov)
- Apply link speed restriction before bringing link up, not after
(Jim Quinlan)
- Update Max Link Speed in Link Capabilities via the internal
writable register, not the read-only config register (Jim Quinlan)
- Handle regulator_bulk_get() error to avoid panic when we call
regulator_bulk_free() later (Jim Quinlan)
- Disable regulators only when removing the bus immediately below a
Root Port because we don't support regulators deeper in the
hierarchy (Jim Quinlan)
- Make const read-only arrays static (Colin Ian King)
Cadence PCIe endpoint driver:
- Correct MSG TLP generation so endpoints can generate INTx messages
(Hans Zhang)
Freescale i.MX6 PCIe controller driver:
- Identify the second controller on i.MX8MQ based on devicetree
'linux,pci-domain' instead of DBI 'reg' address (Richard Zhu)
- Remove imx_pcie_cpu_addr_fixup() since dwc core can now derive the
ATU input address (using parent_bus_offset) from devicetree (Frank
Li)
Freescale Layerscape PCIe controller driver:
- Drop deprecated 'num-ib-windows' and 'num-ob-windows' and
unnecessary 'status' from example (Krzysztof Kozlowski)
- Correct the syscon_regmap_lookup_by_phandle_args("fsl,pcie-scfg")
arg_count to fix probe failure on LS1043A (Ioana Ciornei)
HiSilicon STB PCIe controller driver:
- Call phy_exit() to clean up if histb_pcie_probe() fails (Christophe
JAILLET)
Intel Gateway PCIe controller driver:
- Remove intel_pcie_cpu_addr() since dwc core can now derive the ATU
input address (using parent_bus_offset) from devicetree (Frank Li)
Intel VMD host bridge driver:
- Convert vmd_dev.cfg_lock from spinlock_t to raw_spinlock_t so
pci_ops.read() will never sleep, even on PREEMPT_RT where
spinlock_t becomes a sleepable lock, to avoid calling a sleeping
function from invalid context (Ryo Takakura)
MediaTek PCIe Gen3 controller driver:
- Remove leftover mac_reset assert for Airoha EN7581 SoC (Lorenzo
Bianconi)
- Add EN7581 PBUS controller 'mediatek,pbus-csr' DT property and
program host bridge memory aperture to this syscon node (Lorenzo
Bianconi)
Qualcomm PCIe controller driver:
- Add qcom,pcie-ipq5332 binding (Varadarajan Narayanan)
- Add qcom i.MX8QM and i.MX8QXP/DXP optional DMA interrupt (Alexander
Stein)
- Add optional dma-coherent DT property for Qualcomm SA8775P (Dmitry
Baryshkov)
- Make DT iommu property required for SA8775P and prohibited for
SDX55 (Dmitry Baryshkov)
- Add DT IOMMU and DMA-related properties for Qualcomm SM8450 (Dmitry
Baryshkov)
- Add endpoint DT properties for SAR2130P and enable endpoint mode in
driver (Dmitry Baryshkov)
- Describe endpoint BAR0 and BAR2 as 64-bit only and BAR1 and BAR3 as
RESERVED (Manivannan Sadhasivam)
Rockchip DesignWare PCIe controller driver:
- Describe rk3568 and rk3588 BARs as Resizable, not Fixed (Niklas
Cassel)
Synopsys DesignWare PCIe controller driver:
- Add debugfs-based Silicon Debug, Error Injection, Statistical
Counter support for DWC (Shradha Todi)
- Add debugfs property to expose LTSSM status of DWC PCIe link (Hans
Zhang)
- Add Rockchip support for DWC debugfs features (Niklas Cassel)
- Add dw_pcie_parent_bus_offset() to look up the parent bus address
of a specified 'reg' property and return the offset from the CPU
physical address (Frank Li)
- Use dw_pcie_parent_bus_offset() to derive CPU -> ATU addr offset
via 'reg[config]' for host controllers and 'reg[addr_space]' for
endpoint controllers (Frank Li)
- Apply struct dw_pcie.parent_bus_offset in ATU users to remove use
of .cpu_addr_fixup() when programming ATU (Frank Li)
TI J721E PCIe driver:
- Correct the 'link down' interrupt bit for J784S4 (Siddharth
Vadapalli)
TI Keystone PCIe controller driver:
- Describe AM65x BARs 2 and 5 as Resizable (not Fixed) and reduce
alignment requirement from 1MB to 64KB (Niklas Cassel)
Xilinx Versal CPM PCIe controller driver:
- Free IRQ domain in probe error path to avoid leaking it
(Thippeswamy Havalige)
- Add DT .compatible "xlnx,versal-cpm5nc-host" and driver support for
Versal Net CPM5NC Root Port controller (Thippeswamy Havalige)
- Add driver support for CPM5_HOST1 (Thippeswamy Havalige)
Miscellaneous:
- Convert fsl,mpc83xx-pcie binding to YAML (J. Neuschäfer)
- Use for_each_available_child_of_node_scoped() to simplify apple,
kirin, mediatek, mt7621, tegra drivers (Zhang Zekun)"
* tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (197 commits)
PCI: layerscape: Fix arg_count to syscon_regmap_lookup_by_phandle_args()
PCI: j721e: Fix the value of .linkdown_irq_regfield for J784S4
misc: pci_endpoint_test: Add support for PCITEST_IRQ_TYPE_AUTO
PCI: endpoint: pci-epf-test: Expose supported IRQ types in CAPS register
PCI: dw-rockchip: Endpoint mode cannot raise INTx interrupts
PCI: endpoint: Add intx_capable to epc_features struct
dt-bindings: PCI: Add common schema for devices accessible through PCI BARs
PCI: intel-gw: Remove intel_pcie_cpu_addr()
PCI: imx6: Remove imx_pcie_cpu_addr_fixup()
PCI: dwc: Use parent_bus_offset to remove need for .cpu_addr_fixup()
PCI: dwc: ep: Ensure proper iteration over outbound map windows
PCI: dwc: ep: Use devicetree 'reg[addr_space]' to derive CPU -> ATU addr offset
PCI: dwc: ep: Consolidate devicetree handling in dw_pcie_ep_get_resources()
PCI: dwc: ep: Call epc_create() early in dw_pcie_ep_init()
PCI: dwc: Use devicetree 'reg[config]' to derive CPU -> ATU addr offset
PCI: dwc: Add dw_pcie_parent_bus_offset() checking and debug
PCI: dwc: Add dw_pcie_parent_bus_offset()
PCI/bwctrl: Fix NULL pointer dereference on bus number exhaustion
PCI: xilinx-cpm: Add cpm_csr register mapping for CPM5_HOST1 variant
PCI: brcmstb: Make const read-only arrays static
...
|
|
So far s390 does not allow mmap() of PCI resources to user-space via the
usual mechanisms, though it does use it for RDMA. For the PCI sysfs
resource files and /proc/bus/pci it defines neither HAVE_PCI_MMAP nor
ARCH_GENERIC_PCI_MMAP_RESOURCE. For vfio-pci s390 previously relied on
disabled VFIO_PCI_MMAP and now relies on setting pdev->non_mappable_bars
for all devices.
This is partly because access to mapped PCI resources from user-space
requires special PCI load/store memory-I/O (MIO) instructions, or the
special MMIO syscalls when these are not available. Still, such access is
possible and useful not just for RDMA, in fact not being able to mmap() PCI
resources has previously caused extra work when testing devices.
One thing that doesn't work with PCI resources mapped to user-space though
is the s390 specific virtual ISM device. Not only because the BAR size of
256 TiB prevents mapping the whole BAR but also because access requires use
of the legacy PCI instructions which are not accessible to user-space on
systems with the newer MIO PCI instructions.
Now with the pdev->non_mappable_bars flag ISM can be excluded from mapping
its resources while making this functionality available for all other PCI
devices. To this end introduce a minimal implementation of PCI_QUIRKS and
use that to set pdev->non_mappable_bars for ISM devices only. Then also set
ARCH_GENERIC_PCI_MMAP_RESOURCE to take advantage of the generic
implementation of pci_mmap_resource_range() enabling only the newer sysfs
mmap() interface. This follows the recommendation in
Documentation/PCI/sysfs-pci.rst.
Link: https://lore.kernel.org/r/20250226-vfio_pci_mmap-v7-3-c5c0f1d26efd@linux.ibm.com
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Move machine type detection to the decompressor and use static branches
to implement and use machine_is_[lpar|vm|kvm]() instead of a runtime check
via MACHINE_IS_[LPAR|VM|KVM].
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.14-rc4).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to device_release() in /drivers/base/core.c,
a device without a release function is a broken device
and must be fixed.
The current code directly frees the device after calling device_add()
without waiting for other kernel parts to release their references.
Thus, a reference could still be held to a struct device,
e.g., by sysfs, leading to potential use-after-free
issues if a proper release function is not set.
Fixes: 8c81ba20349d ("net/smc: De-tangle ism and smc device initialization")
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250214120137.563409-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.14-rc3).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Like other drivers qeth is calling local_bh_enable() after napi_schedule()
to kick-start softirqs [0].
Since netif_napi_add_tx() and napi_enable() now take the netdev_lock()
mutex [1], move them out from under the BH protection. Same solution as in
commit a60558644e20 ("wifi: mt76: move napi_enable() from under BH")
Fixes: 1b23cdbd2bbc ("net: protect netdev->napi_list with netdev_lock()")
Link: https://lore.kernel.org/netdev/20240612181900.4d9d18d0@kernel.org/ [0]
Link: https://lore.kernel.org/netdev/20250115035319.559603-1-kuba@kernel.org/ [1]
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250212163659.2287292-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The original Open Systems Adapter (OSA) was introduced by IBM in the
mid-90s. These were then superseded by OSA-Express in 1999 which used
Queued Direct IO to greatly improve throughput. The newer cards
retained the older, slower non-QDIO (OSE) modes for compatibility with
older systems. In Linux, the lcs driver was responsible for cards
operating in the older OSE mode and the qeth driver was introduced to
allow the OSA-Express cards to operate in the newer QDIO (OSD) mode.
For an S390 machine from 1998 or later, there is no reason to use the
OSE mode and lcs driver as all OSA cards since 1999 provide the faster
OSD mode. As a result, it's been years since we have heard of a
customer configuration involving the lcs driver.
This patch removes the lcs driver. The technology it supports has been
obsolete for past 25+ years and is irrelevant for current use cases.
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Aswin Karuvally <aswin@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250204103135.1619097-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the netiucv code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
In prevision to add new UAPI for hwtstamp we will be limited to the struct
ethtool_ts_info that is currently passed in fixed binary format through the
ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code
already started operating on an extensible kernel variant of that
structure, similar in concept to struct kernel_hwtstamp_config vs struct
hwtstamp_config.
Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here
we introduce the kernel-only structure in include/linux/ethtool.h.
The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO.
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With ARCH=s390, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/s390/net/lcs.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://patch.msgid.link/20240625-md-s390-drivers-s390-net-v2-1-5a8a2b2f2ae3@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- Switch read and write software bits for PUDs
- Add missing hardware bits for PUDs and PMDs
- Generate unwind information for C modules to fix GDB unwind error for
vDSO functions
- Create .build-id links for unstripped vDSO files to enable vDSO
debugging with symbols
- Use standard stack frame layout for vDSO generated stack frames to
manually walk stack frames without DWARF information
- Rework perf_callchain_user() and arch_stack_walk_user() functions to
reduce code duplication
- Skip first stack frame when walking user stack
- Add basic checks to identify invalid instruction pointers when
walking stack frames
- Introduce and use struct stack_frame_vdso_wrapper within vDSO user
wrapper code to automatically generate an asm-offset define. Also use
STACK_FRAME_USER_OVERHEAD instead of STACK_FRAME_OVERHEAD to document
that the code works with user space stack
- Clear the backchain of the extra stack frame added by the vDSO user
wrapper code. This allows the user stack walker to detect and skip
the non-standard stack frame. Without this an incorrect instruction
pointer would be added to stack traces.
- Rewrite psw_idle() function in C to ease maintenance and further
enhancements
- Remove get_vtimer() function and use get_cpu_timer() instead
- Mark psw variable in __load_psw_mask() as __unitialized to avoid
superfluous clearing of PSW
- Remove obsolete and superfluous comment about removed TIF_FPU flag
- Replace memzero_explicit() and kfree() with kfree_sensitive() to fix
warnings reported by Coccinelle
- Wipe sensitive data and all copies of protected- or secure-keys from
stack when an IOCTL fails
- Both do_airq_interrupt() and do_io_interrupt() functions set
CIF_NOHZ_DELAY flag. Move it in do_io_irq() to simplify the code
- Provide iucv_alloc_device() and iucv_release_device() helpers, which
can be used to deduplicate more or less identical IUCV device
allocation and release code in four different drivers
- Make use of iucv_alloc_device() and iucv_release_device() helpers to
get rid of quite some code and also remove a cast to an incompatible
function (clang W=1)
- There is no user of iucv_root outside of the core IUCV code left.
Therefore remove the EXPORT_SYMBOL
- __apply_alternatives() contains a runtime check which verifies that
the size of the to be patched code area is even. Convert this to a
compile time check
- Increase size of buffers for sending z/VM CP DIAGNOSE X'008' commands
from 128 to 240
- Do not accept z/VM CP DIAGNOSE X'008' commands longer than maximally
allowed
- Use correct defines IPL_BP_NVME_LEN and IPL_BP0_NVME_LEN instead of
IPL_BP_FCP_LEN and IPL_BP0_FCP_LEN ones to initialize NVMe reIPL
block on 'scp_data' sysfs attribute update
- Initialize the correct fields of the NVMe dump block, which were
confused with FCP fields
- Refactor macros for 'scp_data' (re-)IPL sysfs attribute to reduce
code duplication
- Introduce 'scp_data' sysfs attribute for dump IPL to allow tools such
as dumpconf passing additional kernel command line parameters to a
stand-alone dumper
- Rework the CPACF query functions to use the correct RRE or RRF
instruction formats and set instruction register fields correctly
- Instead of calling BUG() at runtime force a link error during compile
when a unsupported opcode is used with __cpacf_query() or
__cpacf_check_opcode() functions
- Fix a crash in ap_parse_bitmap_str() function on /sys/bus/ap/apmask
or /sys/bus/ap/aqmask sysfs file update with a relative mask value
- Fix "bindings complete" udev event which should be sent once all AP
devices have been bound to device drivers and again when unbind/bind
actions take place and all AP devices are bound again
- Facility list alt_stfle_fac_list is nowhere used in the decompressor,
therefore remove it there
- Remove custom kprobes insn slot allocator in favour of the standard
module_alloc() one, since kernel image and module areas are located
within 4GB
- Use kvcalloc() instead of kvmalloc_array() in zcrypt driver to avoid
calling memset() with a large byte count and get rid of the sparse
warning as result
* tag 's390-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (39 commits)
s390/zcrypt: Use kvcalloc() instead of kvmalloc_array()
s390/kprobes: Remove custom insn slot allocator
s390/boot: Remove alt_stfle_fac_list from decompressor
s390/ap: Fix bind complete udev event sent after each AP bus scan
s390/ap: Fix crash in AP internal function modify_bitmap()
s390/cpacf: Make use of invalid opcode produce a link error
s390/cpacf: Split and rework cpacf query functions
s390/ipl: Introduce sysfs attribute 'scp_data' for dump ipl
s390/ipl: Introduce macros for (re)ipl sysfs attribute 'scp_data'
s390/ipl: Fix incorrect initialization of nvme dump block
s390/ipl: Fix incorrect initialization of len fields in nvme reipl block
s390/ipl: Do not accept z/VM CP diag X'008' cmds longer than max length
s390/ipl: Fix size of vmcmd buffers for sending z/VM CP diag X'008' cmds
s390/alternatives: Convert runtime sanity check into compile time check
s390/iucv: Unexport iucv_root
tty: hvc-iucv: Make use of iucv_alloc_device()
s390/smsgiucv_app: Make use of iucv_alloc_device()
s390/netiucv: Make use of iucv_alloc_device()
s390/vmlogrdr: Make use of iucv_alloc_device()
s390/iucv: Provide iucv_alloc_device() / iucv_release_device()
...
|
|
Make use of iucv_alloc_device() to get rid of quite some code. In addition
this also removes a cast to an incompatible function (clang W=1):
drivers/s390/net/smsgiucv_app.c:176:26: error: cast from 'void (*)(const void *)' to 'void (*)(struct device *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
176 | smsg_app_dev->release = (void (*)(struct device *)) kfree;
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/r/20240417-s390-drivers-fix-cast-function-type-v1-2-fd048c9903b0@kernel.org
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://lore.kernel.org/r/20240506194454.1160315-5-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Make use of iucv_alloc_device() to get rid of quite some code. In addition
this also removes a cast to an incompatible function (clang W=1):
drivers/s390/net/netiucv.c:1716:18: error: cast from 'void (*)(const void *)' to 'void (*)(struct device *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
1716 | dev->release = (void (*)(struct device *))kfree;
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/r/20240417-s390-drivers-fix-cast-function-type-v1-3-fd048c9903b0@kernel.org
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://lore.kernel.org/r/20240506194454.1160315-4-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Simon reported that ndo_change_mtu() methods were never
updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted
in commit 501a90c94510 ("inet: protect against too small
mtu values.")
We read dev->mtu without holding RTNL in many places,
with READ_ONCE() annotations.
It is time to take care of ndo_change_mtu() methods
to use corresponding WRITE_ONCE()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Simon Horman <horms@kernel.org>
Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
include/linux/filter.h
kernel/bpf/core.c
66e13b615a0c ("bpf: verifier: prevent userspace memory access")
d503a04f8bc0 ("bpf: Add support for certain atomics in bpf_arena to x86 JIT")
https://lore.kernel.org/all/20240429114939.210328b0@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Symptom:
When the hsuid attribute is set for the first time on an IQD Layer3
device while the corresponding network interface is already UP,
the kernel will try to execute a napi function pointer that is NULL.
Example:
---------------------------------------------------------------------------
[ 2057.572696] illegal operation: 0001 ilc:1 [#1] SMP
[ 2057.572702] Modules linked in: af_iucv qeth_l3 zfcp scsi_transport_fc sunrpc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6
nft_reject nft_ct nf_tables_set nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink ghash_s390 prng xts aes_s390 des_s390 de
s_generic sha3_512_s390 sha3_256_s390 sha512_s390 vfio_ccw vfio_mdev mdev vfio_iommu_type1 eadm_sch vfio ext4 mbcache jbd2 qeth_l2 bridge stp llc dasd_eckd_mod qeth dasd_mod
qdio ccwgroup pkey zcrypt
[ 2057.572739] CPU: 6 PID: 60182 Comm: stress_client Kdump: loaded Not tainted 4.18.0-541.el8.s390x #1
[ 2057.572742] Hardware name: IBM 3931 A01 704 (LPAR)
[ 2057.572744] Krnl PSW : 0704f00180000000 0000000000000002 (0x2)
[ 2057.572748] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:3 PM:0 RI:0 EA:3
[ 2057.572751] Krnl GPRS: 0000000000000004 0000000000000000 00000000a3b008d8 0000000000000000
[ 2057.572754] 00000000a3b008d8 cb923a29c779abc5 0000000000000000 00000000814cfd80
[ 2057.572756] 000000000000012c 0000000000000000 00000000a3b008d8 00000000a3b008d8
[ 2057.572758] 00000000bab6d500 00000000814cfd80 0000000091317e46 00000000814cfc68
[ 2057.572762] Krnl Code:#0000000000000000: 0000 illegal
>0000000000000002: 0000 illegal
0000000000000004: 0000 illegal
0000000000000006: 0000 illegal
0000000000000008: 0000 illegal
000000000000000a: 0000 illegal
000000000000000c: 0000 illegal
000000000000000e: 0000 illegal
[ 2057.572800] Call Trace:
[ 2057.572801] ([<00000000ec639700>] 0xec639700)
[ 2057.572803] [<00000000913183e2>] net_rx_action+0x2ba/0x398
[ 2057.572809] [<0000000091515f76>] __do_softirq+0x11e/0x3a0
[ 2057.572813] [<0000000090ce160c>] do_softirq_own_stack+0x3c/0x58
[ 2057.572817] ([<0000000090d2cbd6>] do_softirq.part.1+0x56/0x60)
[ 2057.572822] [<0000000090d2cc60>] __local_bh_enable_ip+0x80/0x98
[ 2057.572825] [<0000000091314706>] __dev_queue_xmit+0x2be/0xd70
[ 2057.572827] [<000003ff803dd6d6>] afiucv_hs_send+0x24e/0x300 [af_iucv]
[ 2057.572830] [<000003ff803dd88a>] iucv_send_ctrl+0x102/0x138 [af_iucv]
[ 2057.572833] [<000003ff803de72a>] iucv_sock_connect+0x37a/0x468 [af_iucv]
[ 2057.572835] [<00000000912e7e90>] __sys_connect+0xa0/0xd8
[ 2057.572839] [<00000000912e9580>] sys_socketcall+0x228/0x348
[ 2057.572841] [<0000000091514e1a>] system_call+0x2a6/0x2c8
[ 2057.572843] Last Breaking-Event-Address:
[ 2057.572844] [<0000000091317e44>] __napi_poll+0x4c/0x1d8
[ 2057.572846]
[ 2057.572847] Kernel panic - not syncing: Fatal exception in interrupt
-------------------------------------------------------------------------------------------
Analysis:
There is one napi structure per out_q: card->qdio.out_qs[i].napi
The napi.poll functions are set during qeth_open().
Since
commit 1cfef80d4c2b ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)")
qeth_set_offline()/qeth_set_online() no longer call dev_close()/
dev_open(). So if qeth_free_qdio_queues() cleared
card->qdio.out_qs[i].napi.poll while the network interface was UP and the
card was offline, they are not set again.
Reproduction:
chzdev -e $devno layer2=0
ip link set dev $network_interface up
echo 0 > /sys/bus/ccwgroup/devices/0.0.$devno/online
echo foo > /sys/bus/ccwgroup/devices/0.0.$devno/hsuid
echo 1 > /sys/bus/ccwgroup/devices/0.0.$devno/online
-> Crash (can be enforced e.g. by af_iucv connect(), ip link down/up, ...)
Note that a Completion Queue (CQ) is only enabled or disabled, when hsuid
is set for the first time or when it is removed.
Workarounds:
- Set hsuid before setting the device online for the first time
or
- Use chzdev -d $devno; chzdev $devno hsuid=xxx; chzdev -e $devno;
to set hsuid on an existing device. (this will remove and recreate the
network interface)
Fix:
There is no need to free the output queues when a completion queue is
added or removed.
card->qdio.state now indicates whether the inbound buffer pool and the
outbound queues are allocated.
card->qdio.c_q indicates whether a CQ is allocated.
Fixes: 1cfef80d4c2b ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240430091004.2265683-1-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
I added dst_rt6_info() in commit
e8dfd42c17fa ("ipv6: introduce dst_rt6_info() helper")
This patch does a similar change for IPv4.
Instead of (struct rtable *)dst casts, we can use :
#define dst_rtable(_ptr) \
container_of_const(_ptr, struct rtable, dst)
Patch is smaller than IPv6 one, because IPv4 has skb_rtable() helper.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/20240429133009.1227754-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The struct 'ism_client' is specialized for s390 platform firmware ISM.
So replace it with 'void' to make SMCD DMB registration helper generic
for both Emulated-ISM and existing ISM.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Instead of (struct rt6_info *)dst casts, we can use :
#define dst_rt6_info(_ptr) \
container_of_const(_ptr, struct rt6_info, dst)
Some places needed missing const qualifiers :
ip6_confirm_neigh(), ipv6_anycast_destination(),
ipv6_unicast_destination(), has_gateway()
v2: added missing parts (David Ahern)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since [1], dma_alloc_coherent() does not accept requests for GFP_COMP
anymore, even on archs that may be able to fulfill this. Functionality that
relied on the receive buffer being a compound page broke at that point:
The SMC-D protocol, that utilizes the ism device driver, passes receive
buffers to the splice processor in a struct splice_pipe_desc with a
single entry list of struct pages. As the buffer is no longer a compound
page, the splice processor now rejects requests to handle more than a
page worth of data.
Replace dma_alloc_coherent() and allocate a buffer with folio_alloc and
create a DMA map for it with dma_map_page(). Since only receive buffers
on ISM devices use DMA, qualify the mapping as FROM_DEVICE.
Since ISM devices are available on arch s390, only, and on that arch all
DMA is coherent, there is no need to introduce and export some kind of
dma_sync_to_cpu() method to be called by the SMC-D protocol layer.
Analogously, replace dma_free_coherent by a two step dma_unmap_page,
then folio_put to free the receive buffer.
[1] https://lore.kernel.org/all/20221113163535.884299-1-hch@lst.de/
Fixes: c08004eede4b ("s390/ism: don't pass bogus GFP_ flags to dma_alloc_coherent")
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The IO subsystem expects a driver to retry a ccw_device_start, when the
subsequent interrupt response block (irb) contains a deferred
condition code 1.
Symptoms before this commit:
On the read channel we always trigger the next read anyhow, so no
different behaviour here.
On the write channel we may experience timeout errors, because the
expected reply will never be received without the retry.
Other callers of qeth_send_control_data() may wrongly assume that the ccw
was successful, which may cause problems later.
Note that since
commit 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
and
commit 5ef1dc40ffa6 ("s390/cio: fix invalid -EBUSY on ccw_device_start")
deferred CC1s are much more likely to occur. See the commit message of the
latter for more background information.
Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Co-developed-by: Thorsten Winkler <twinkler@linux.ibm.com>
Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Link: https://lore.kernel.org/r/20240321115337.3564694-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Heiko Carstens:
- Various virtual vs physical address usage fixes
- Add new bitwise types and helper functions and use them in s390
specific drivers and code to make it easier to find virtual vs
physical address usage bugs.
Right now virtual and physical addresses are identical for s390,
except for module, vmalloc, and similar areas. This will be changed,
hopefully with the next merge window, so that e.g. the kernel image
and modules will be located close to each other, allowing for direct
branches and also for some other simplifications.
As a prerequisite this requires to fix all misuses of virtual and
physical addresses. As it turned out people are so used to the
concept that virtual and physical addresses are the same, that new
bugs got added to code which was already fixed. In order to avoid
that even more code gets merged which adds such bugs add and use new
bitwise types, so that sparse can be used to find such usage bugs.
Most likely the new types can go away again after some time
- Provide a simple ARCH_HAS_DEBUG_VIRTUAL implementation
- Fix kprobe branch handling: if an out-of-line single stepped relative
branch instruction has a target address within a certain address area
in the entry code, the program check handler may incorrectly execute
cleanup code as if KVM code was executed, leading to crashes
- Fix reference counting of zcrypt card objects
- Various other small fixes and cleanups
* tag 's390-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (41 commits)
s390/entry: compare gmap asce to determine guest/host fault
s390/entry: remove OUTSIDE macro
s390/entry: add CIF_SIE flag and remove sie64a() address check
s390/cio: use while (i--) pattern to clean up
s390/raw3270: make class3270 constant
s390/raw3270: improve raw3270_init() readability
s390/tape: make tape_class constant
s390/vmlogrdr: make vmlogrdr_class constant
s390/vmur: make vmur_class constant
s390/zcrypt: make zcrypt_class constant
s390/mm: provide simple ARCH_HAS_DEBUG_VIRTUAL support
s390/vfio_ccw_cp: use new address translation helpers
s390/iucv: use new address translation helpers
s390/ctcm: use new address translation helpers
s390/lcs: use new address translation helpers
s390/qeth: use new address translation helpers
s390/zfcp: use new address translation helpers
s390/tape: fix virtual vs physical address confusion
s390/3270: use new address translation helpers
s390/3215: use new address translation helpers
...
|
|
Use virt_to_dma32() and friends to properly convert virtual to physical and
physical to virtual addresses so that "make C=1" does not generate any
warnings anymore.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Use virt_to_dma32() and friends to properly convert virtual to physical and
physical to virtual addresses so that "make C=1" does not generate any
warnings anymore.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Use virt_to_dma64() and friends to properly convert virtual to physical and
physical to virtual addresses so that "make C=1" does not generate any
warnings anymore.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Use virt_to_dma32() and friends to properly convert virtual to physical and
physical to virtual addresses so that "make C=1" does not generate any
warnings anymore.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Found with git grep 'MODULE_AUTHOR(".*([^)]*@'
Fixed with
sed -i '/MODULE_AUTHOR(".*([^)]*@/{s/ (/ </g;s/)"/>"/;s/)and/> and/}' \
$(git grep -l 'MODULE_AUTHOR(".*([^)]*@')
Also:
in drivers/media/usb/siano/smsusb.c normalise ", INC" to ", Inc";
this is what every other MODULE_AUTHOR for this company says,
and it's what the header says
in drivers/sbus/char/openprom.c normalise a double-spaced separator;
this is clearly copied from the copyright header,
where the names are aligned on consecutive lines thusly:
* Linux/SPARC PROM Configuration Driver
* Copyright (C) 1996 Thomas K. Dyas (tdyas@noc.rutgers.edu)
* Copyright (C) 1996 Eddie C. Dost (ecd@skynet.be)
but the authorship branding is single-line
Link: https://lkml.kernel.org/r/mk3geln4azm5binjjlfsgjepow4o73domjv6ajybws3tz22vb3@tarta.nabijaczleweli.xyz
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Symptom:
In case of a bad cable connection (e.g. dirty optics) a fast sequence of
network DOWN-UP-DOWN-UP could happen. UP triggers recovery of the qeth
interface. In case of a second DOWN while recovery is still ongoing, it
can happen that the IP@ of a Layer3 qeth interface is lost and will not
be recovered by the second UP.
Problem:
When registration of IP addresses with Layer 3 qeth devices fails, (e.g.
because of bad address format) the respective IP address is deleted from
its hash-table in the driver. If registration fails because of a ENETDOWN
condition, the address should stay in the hashtable, so a subsequent
recovery can restore it.
3caa4af834df ("qeth: keep ip-address after LAN_OFFLINE failure")
fixes this for registration failures during normal operation, but not
during recovery.
Solution:
Keep L3-IP address in case of ENETDOWN in qeth_l3_recover_ip(). For
consistency with qeth_l3_add_ip() we also keep it in case of EADDRINUSE,
i.e. for some reason the card already/still has this address registered.
Fixes: 4a71df50047f ("qeth: new qeth device driver")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://lore.kernel.org/r/20240206085849.2902775-1-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The System EID (SEID) is an internal EID that is used by the SMCv2
software stack that has a predefined and constant value representing
the s390 physical machine that the OS is executing on. So it should
be managed by SMC stack instead of ISM driver and be consistent for
all ISMv2 device (including virtual ISM devices) on s390 architecture.
Suggested-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-and-tested-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to virtual ISM support feature defined by SMCv2.1, GIDs of
virtual ISM device are UUIDs defined by RFC4122, which are 128-bits
long. So some adaptation work is required. And note that the GIDs of
existing platform firmware ISM devices still remain 64-bits long.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit a72178cfe855 ("net/smc: Fix dependency of SMC on ISM")
you can build the ism code without selecting the SMC network protocol.
That leaves some ism functions be reported as unused. Move these
functions under the conditional compile with CONFIG_SMC.
Also codify the suggestion to also configure the SMC protocol in ism's
Kconfig - but with an "imply" rather than a "select" as SMC depends on
other config options and allow for a deliberate decision not to build
SMC. Also, mention that in ISM's help.
Fixes: a72178cfe855 ("net/smc: Fix dependency of SMC on ISM")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/netdev/afd142a2-1fa0-46b9-8b2d-7652d41d3ab8@infradead.org/
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace 'weed' with 'we' in the comment.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect new_entry->dbf_name to be NUL-terminated based on its use with
strcmp():
| if (strcmp(entry->dbf_name, name) == 0) {
Moreover, NUL-padding is not required as new_entry is kzalloc'd just
before this assignment:
| new_entry = kzalloc(sizeof(struct qeth_dbf_entry), GFP_KERNEL);
... rendering any future NUL-byte assignments (like the ones strncpy()
does) redundant.
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com>
Tested-by: Thorsten Winkler <twinkler@linux.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231023-strncpy-drivers-s390-net-qeth_core_main-c-v1-1-e7ce65454446@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect chid to be NUL-terminated based on its use with format
strings:
CTCM_DBF_TEXT_(SETUP, CTC_DBF_INFO, "%s(%s) %s", CTCM_FUNTAIL,
chid, ok ? "OK" : "failed");
Moreover, NUL-padding is not required as it is _only_ used in this one
instance with a format string.
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
We can also drop the +1 from chid's declaration as we no longer need to
be cautious about leaving a spot for a NUL-byte. Let's use the more
idiomatic strscpy usage of (dest, src, sizeof(dest)) as this more
closely ties the destination buffer to the length.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com>
Tested-by: Thorsten Winkler <twinkler@linux.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231023-strncpy-drivers-s390-net-ctcm_main-c-v1-1-265db6e78165@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the SMC protocol is built into the kernel proper while ISM is
configured to be built as module, linking the kernel fails due to
unresolved dependencies out of net/smc/smc_ism.o to
ism_get_smcd_ops, ism_register_client, and ism_unregister_client
as reported via the linux-next test automation (see link).
This however is a bug introduced a while ago.
Correct the dependency list in ISM's and SMC's Kconfig to reflect the
dependencies that are actually inverted. With this you cannot build a
kernel with CONFIG_SMC=y and CONFIG_ISM=m. Either ISM needs to be 'y',
too - or a 'n'. That way, SMC can still be configured on non-s390
architectures that do not have (nor need) an ISM driver.
Fixes: 89e7d2ba61b7 ("net/ism: Add new API for client registration")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/linux-next/d53b5b50-d894-4df8-8969-fd39e63440ae@infradead.org/
Co-developed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20231006125847.1517840-1-gbayer@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/dsa/port.c
9945c1fb03a3 ("net: dsa: fix older DSA drivers using phylink")
a88dd7538461 ("net: dsa: remove legacy_pre_march2020 detection")
https://lore.kernel.org/all/20230731102254.2c9868ca@canb.auug.org.au/
net/xdp/xsk.c
3c5b4d69c358 ("net: annotate data-races around sk->sk_mark")
b7f72a30e9ac ("xsk: introduce wrappers and helpers for supporting multi-buffer in Tx path")
https://lore.kernel.org/all/20230731102631.39988412@canb.auug.org.au/
drivers/net/ethernet/broadcom/bnxt/bnxt.c
37b61cda9c16 ("bnxt: don't handle XDP in netpoll")
2b56b3d99241 ("eth: bnxt: handle invalid Tx completions more gracefully")
https://lore.kernel.org/all/20230801101708.1dc7faac@canb.auug.org.au/
Adjacent changes:
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c
62da08331f1a ("net/mlx5e: Set proper IPsec source port in L4 selector")
fbd517549c32 ("net/mlx5e: Add function to get IPsec offload namespace")
drivers/net/ethernet/sfc/selftest.c
55c1528f9b97 ("sfc: fix field-spanning memcpy in selftest")
ae9d445cd41f ("sfc: Miscellaneous comment removals")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
