| Age | Commit message (Collapse) | Author |
|---|
|
Its reported that amd-pmf driver when built with config which does not
have ACPI_PLATFORM_PROFILE set/enabled throws a undefined references to
symbols used.
ld: vmlinux.o: in function `amd_pmf_init_sps':
drivers/platform/x86/amd/pmf/sps.c:132: undefined reference to `platform_profile_register'
ld: vmlinux.o: in function `amd_pmf_deinit_sps':
drivers/platform/x86/amd/pmf/sps.c:142: undefined reference to `platform_profile_remove'
Fix it by adding a "select" to the Kconfig.
Fixes: da5ce22df5fe ("platform/x86/amd/pmf: Add support for PMF core layer")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20220819083858.3987590-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Some of the older platforms with _HID "AMDI0100" PMF driver can be force
loaded by interested users but only for experimental purposes.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-11-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The transition to auto-mode happens when the PMF driver receives
AMT (Auto Mode transition) event. transition logic will reside in the
PMF driver but the events would come from other supported drivers[1].
The thermal parameters would vary between when a performance "on-lap" mode
is detected and versus when not. The CQL event would get triggered from
other drivers, so that PMF driver would adjust the system thermal config
based on the ACPI inputs.
OEMs can control whether or not to enable AMT or CQL via other supported
drivers[1] but the actual transition logic resides in the AMD PMF driver.
When an AMT event is received the automatic mode transition RAPL algorithm
will run. When a CQL event is received an performance "on-lap" mode will
be enabled and thermal parameters will be adjusted accordingly.
[1]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/commit/?h=review-hans&id=755b249250df1b612d982f3b702c831b26ecdf73
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-10-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This feature has 3 modes quiet, balanced, performance
The objective of this feature is to track the moving average of system
power over the time period specified and switch to the subsequent mode.
In order to do this, PMF driver will get the moving average of APU power
from PMFW and power threshold, time constants, system config parameters
from OEM inputs.
System power as read by PMF driver from PMFW is the filtered value over
the sampling window. Every sampling window, moving average of system power
is computed. At the end of the monitoring window, the moving average is
compared against the threshold for mode switch for decision making.
With AMD managing the system config limits, any mode switch within
auto-mode will result in limits of fPPT/sPPT/STAPM or STT being scaled
down.
When "auto mode" is enabled, the static slider control remains out of
the PMF driver, so the platform_profile registration would not
happen in PMF driver.
The transition to auto-mode only happens when the APMF fn5 is enabled
in BIOS, platform_profile set to "balanced" and a AMT
(Auto Mode transition) is received.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-9-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
PMF driver polls for metrics information from PMFW to understand the system
behavior, power consumption etc.
This metrics table information will be used the PMF features to tweak the
thermal heuristics. The poll duration can also be changed by the user
by changing the poll duration time.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-8-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
PMF has a generic interface defined via PMF ACPI fn9 for influencing fan
policy during mode switch.
PMF ACPI fn9 will normally be invoked when AMDPMF needs to change the fan
table index for the EC. When AMDPMF is loaded this function will be invoked
to change fan speed. OEM can also choose to report the actual fan table
index and fan RPM to PMF through OEM structure.
This information will be communicated by PMF driver to customer BIOS.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-7-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
PMF driver can send periodic heartbeat signals to OEM BIOS. When BIOS does
not receive the signal after a period of time, it can infer that AMDPMF
has hung or failed to load.
In this situation, BIOS can fallback to legacy operations. OEM can modify
the time interval of the signal or completely disable signals through
ACPI Method.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-6-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add debugfs support to the PMF driver so that using this interface the
live counters from the PMFW can be queried to see if the power parameters
are getting set properly when a certain power mode change happens.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-5-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
SPS (a.k.a. Static Power Slider) gives a feel of Windows performance
power slider for the Linux users, where the user selects a certain
mode (like "balanced", "low-power" or "performance") and the thermals
associated with each selected mode gets applied from the silicon
side via the mailboxes defined through PMFW.
PMF driver hooks to platform_profile by reading the PMF ACPI fn9 to
see if the support is being advertised by ACPI interface.
If supported, the PMF driver reacts to platform_profile selection choices
made by the user and adjust the system thermal behavior.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-4-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
PMF driver implements the ACPI methods as defined by AMD for PMF Support.
The ACPI layer acts as a glue that helps in providing the infrastructure
for OEMs customization.
OEMs can refer to PMF support documentation to decide on the list of
functions to be supported on their specific platform model.
AMD mandates that PMF ACPI fn0 and fn1 to be implemented which
provides the set of functions, params and the notifications that
would be sent to PMF driver so that PMF driver can adapt and
react.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-3-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
PMF core layer is meant to abstract the common functionalities
across PMF features. This layer also does the plumbing work
like setting up the mailbox channel for the communication
between the PMF driver and the PMFW (Power Management Firmware)
running on the SMU.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-2-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
PMC driver can be supported on a new upcoming platform.
Add this information to the support list.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220630050324.3780654-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
New version of PMC controller will have a separate ACPI id, add that
to the support list.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220630050324.3780654-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Currently, AMD supported platform drivers are grouped under generic "x86"
folder structure. Move the current drivers (amd-pmc and amd_hsmp) to a
separate directory. This would also mean the newer driver submissions to
pdx86 subsystem in the future will also land in AMD specific directory.
Reviewed-by: Naveen Krishna Chatradhi <NaveenKrishna.Chatradhi@amd.com>
Tested-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220608193212.2827257-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
