summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/pinctrl-at91-pio4.c
AgeCommit message (Collapse)Author
2025-05-30Merge tag 'pinctrl-v6.16-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "An especially linear and sparse improvement and new drivers release. Nothing exciting. The biggest change in Bartosz changes to make gpiochip set/get calls return error codes (something we should have fixed ages ago but is now finally getting fixed.) Core changes: - Add the devres devm_pinctrl_register_mappings() call that can register some pin control machine mappings and have them go away with the associated device New drivers: - Support for the Mediatek MT6893 and MT8196 SoCs - Support for the Renesas RZ/V2N SoC - Support for the NXP Freescale i.MX943 SoC Improvements: - Per-SoC suspend/resume callbacks in the Samsung drivers - Set all pins as input (High-Z) at probe in the MCP23S08 driver - Switch most GPIO chips to use the setters/getters with a return value - EGPIO support in the Qualcomm QCM2290 driver - Fix up the number of available GPIO lines in Qualcomm QCS8300 and QCS615" * tag 'pinctrl-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits) pinctrl: freescale: Add support for imx943 pinctrl pinctrl: core: add devm_pinctrl_register_mappings() pinctrl: remove extern specifier for functions in machine.h pinctrl: mediatek: eint: Fix invalid pointer dereference for v1 platforms pinctrl: freescale: Enable driver if platform is enabled. pinctrl: freescale: Depend imx-scu driver on OF pinctrl: armada-37xx: propagate error from armada_37xx_pmx_set_by_name() pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get_direction() pinctrl: armada-37xx: propagate error from armada_37xx_pmx_gpio_set_direction() pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get() pinctrl: armada-37xx: propagate error from armada_37xx_gpio_direction_output() pinctrl: armada-37xx: set GPIO output value before setting direction pinctrl: armada-37xx: use correct OUTPUT_VAL register for GPIOs > 31 pinctrl: meson: Drop unused aml_pctl_find_group_by_name() pinctrl: at91: Fix possible out-of-boundary access pinctrl: add stubs for OF-specific pinconf functions pinctrl: qcom: correct the ngpios entry for QCS8300 pinctrl: qcom: correct the ngpios entry for QCS615 dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs8300 dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs615 ...
2025-05-16pinctrl: Switch to irq_domain_create_*()Jiri Slaby (SUSE)
irq_domain_add_*() interfaces are going away as being obsolete now. Switch to the preferred irq_domain_create_*() ones. Those differ in the node parameter: They take more generic struct fwnode_handle instead of struct device_node. Therefore, of_fwnode_handle() is added around the original parameter. Note some of the users can likely use dev->fwnode directly instead of indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not guaranteed to be set for all, so this has to be investigated on case to case basis (by people who can actually test with the HW). [ tglx: Fix up subject prefix ] Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/all/20250319092951.37667-31-jirislaby@kernel.org
2025-04-15pinctrl: at91-pio4: use new GPIO line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Link: https://lore.kernel.org/20250408-gpiochip-set-rv-pinctrl-part1-v1-1-c9d521d7c8c7@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-11pinctrl: at91: Add error handling for pinctrl_utils_add_map_mux()Wentao Liang
In atmel_pctl_dt_subnode_to_map(), the return value of pinctrl_utils_add_map_mux() needs to be checked, for the function will fail to associate group when the group map is full. Add error handling for pinctrl_utils_add_map_mux() to return immediately and propagate the error code to caller function when the function fails. Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Link: https://lore.kernel.org/20250318030717.781-1-vulab@iscas.ac.cn Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-06-26pinctrl: at91: Use scope based of_node_put() cleanupsPeng Fan
Use scope based of_node_put() cleanup to simplify code. Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/20240504-pinctrl-cleanup-v2-11-26c5f2dc1181@nxp.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-12-21pinctrl: at91-pio4: use dedicated lock class for IRQAlexis Lothoré
Trying to suspend to RAM on SAMA5D27 EVK leads to the following lockdep warning: ============================================ WARNING: possible recursive locking detected 6.7.0-rc5-wt+ #532 Not tainted -------------------------------------------- sh/92 is trying to acquire lock: c3cf306c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 but task is already holding lock: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by sh/92: #0: c3aa0258 (sb_writers#6){.+.+}-{0:0}, at: ksys_write+0xd8/0x178 #1: c4c2df44 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x138/0x284 #2: c32684a0 (kn->active){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x148/0x284 #3: c232b6d4 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend+0x13c/0x4e8 #4: c387b088 (&dev->mutex){....}-{3:3}, at: __device_suspend+0x1e8/0x91c #5: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 stack backtrace: CPU: 0 PID: 92 Comm: sh Not tainted 6.7.0-rc5-wt+ #532 Hardware name: Atmel SAMA5 unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x48 dump_stack_lvl from __lock_acquire+0x19ec/0x3a0c __lock_acquire from lock_acquire.part.0+0x124/0x2d0 lock_acquire.part.0 from _raw_spin_lock_irqsave+0x5c/0x78 _raw_spin_lock_irqsave from __irq_get_desc_lock+0xe8/0x100 __irq_get_desc_lock from irq_set_irq_wake+0xa8/0x204 irq_set_irq_wake from atmel_gpio_irq_set_wake+0x58/0xb4 atmel_gpio_irq_set_wake from irq_set_irq_wake+0x100/0x204 irq_set_irq_wake from gpio_keys_suspend+0xec/0x2b8 gpio_keys_suspend from dpm_run_callback+0xe4/0x248 dpm_run_callback from __device_suspend+0x234/0x91c __device_suspend from dpm_suspend+0x224/0x43c dpm_suspend from dpm_suspend_start+0x9c/0xa8 dpm_suspend_start from suspend_devices_and_enter+0x1e0/0xa84 suspend_devices_and_enter from pm_suspend+0x460/0x4e8 pm_suspend from state_store+0x78/0xe4 state_store from kernfs_fop_write_iter+0x1a0/0x284 kernfs_fop_write_iter from vfs_write+0x38c/0x6f4 vfs_write from ksys_write+0xd8/0x178 ksys_write from ret_fast_syscall+0x0/0x1c Exception stack(0xc52b3fa8 to 0xc52b3ff0) 3fa0: 00000004 005a0ae8 00000001 005a0ae8 00000004 00000001 3fc0: 00000004 005a0ae8 00000001 00000004 00000004 b6c616c0 00000020 0059d190 3fe0: 00000004 b6c61678 aec5a041 aebf1a26 This warning is raised because pinctrl-at91-pio4 uses chained IRQ. Whenever a wake up source configures an IRQ through irq_set_irq_wake, it will lock the corresponding IRQ desc, and then call irq_set_irq_wake on "parent" IRQ which will do the same on its own IRQ desc, but since those two locks share the same class, lockdep reports this as an issue. Fix lockdep false positive by setting a different class for parent and children IRQ Fixes: 776180848b57 ("pinctrl: introduce driver for Atmel PIO4 controller") Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Link: https://lore.kernel.org/r/20231215-lockdep_warning-v1-1-8137b2510ed5@bootlin.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-08-10pinctrl: at91-pio4: drop useless check in atmel_conf_pin_config_dbg_show()Sergey Shtylyov
In atmel_conf_pin_config_dbg_show(), checking atmel_pioctrl->pins[pin_id] against being NULL doesn't make any sense as it gets derefenced first and the driver's probe() method immediately returns -ENOMEM when devm_kzalloc() returns NULL for any atmel_pioctrl->pins[] element anyway, thus failing to register the device... Found by Linux Verification Center (linuxtesting.org) with the Svace static analysis tool. Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/4ab2f59f-45c1-76a2-94da-3331e8ec4e35@omp.ru Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-06-16pinctrl: at91-pio4: check return value of devm_kasprintf()Claudiu Beznea
devm_kasprintf() returns a pointer to dynamically allocated memory. Pointer could be NULL in case allocation fails. Check pointer validity. Identified with coccinelle (kmerr.cocci script). Fixes: 776180848b57 ("pinctrl: introduce driver for Atmel PIO4 controller") Depends-on: 1c4e5c470a56 ("pinctrl: at91: use devm_kasprintf() to avoid potential leaks") Depends-on: 5a8f9cf269e8 ("pinctrl: at91-pio4: use proper format specifier for unsigned int") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230615105333.585304-4-claudiu.beznea@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-05-24pinctrl: at91-pio4: Enable Push-Pull configurationRyan Wanner
Enable push-pull configuration. Remove integer value argument from open-drain configuration as it is discarded when pinconf function is called from gpiolib. Add push-pull do debug and get functions. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/d898c31277f6bce6f7d830edf4332ff605498c7b.1684313910.git.Ryan.Wanner@microchip.com [Fix two coding style issues] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-05-02Merge tag 'pinctrl-v6.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Mostly drivers! Nothing special: some new Qualcomm chips as usual, and the new NXP S32 and nVidia BlueField-3. Core changes: - Make a lot of pin controllers with GPIO and irqchips immutable, i.e. not living structs, but const structs. This is driving a changed initiated by the irqchip maintainers. New drivers: - New driver for the NXP S32 SoC pin controller - As part of a thorough cleanup and restructuring of the Ralink/Mediatek drivers, the Ralink MIPS pin control drivers were folded into the Mediatek directory and the family is renamed "mtmips". The Ralink chips live on as Mediatek MIPS family where new variants can be added. As part of this work also the device tree bindings were reworked. - New subdriver for the Qualcomm SM7150 SoC. - New subdriver for the Qualcomm IPQ9574 SoC. - New driver for the nVidia BlueField-3 SoC. - Support for the Qualcomm PMM8654AU mixed signal circuit GPIO. - Support for the Qualcomm PMI632 mixed signal circuit GPIO. Improvements: - Add some missing pins and generic cleanups on the Renesas r8a779g0 and r8a779g0 pin controllers. Generic Renesas extension for power source selection on several SoCs. - Misc cleanups for the Atmel AT91 and AT91-PIO4 pin controllers - Make the GPIO mode work on the Qualcomm SM8550-lpass-lpi driver. - Several device tree binding cleanups as the binding YAML syntax is solidifying" * tag 'pinctrl-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (153 commits) pinctrl-bcm2835.c: fix race condition when setting gpio dir dt-bindings: pinctrl: qcom,sm8150: Drop duplicate function value "atest_usb2" dt-bindings: pinctrl: qcom: Add few missing functions pinctrl: qcom: spmi-gpio: Add PMI632 support dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632 pinctrl: wpcm450: select MFD_SYSCON pinctrl: qcom ssbi-gpio: Convert to immutable irq_chip pinctrl: qcom ssbi-mpp: Convert to immutable irq_chip pinctrl: qcom spmi-mpp: Convert to immutable irq_chip pinctrl: plgpio: Convert to immutable irq_chip pinctrl: pistachio: Convert to immutable irq_chip pinctrl: pic32: Convert to immutable irq_chip pinctrl: sx150x: Convert to immutable irq_chip pinctrl: stmfx: Convert to immutable irq_chip pinctrl: st: Convert to immutable irq_chip pinctrl: mcp23s08: Convert to immutable irq_chip pinctrl: equilibrium: Convert to immutable irq_chip pinctrl: npcm7xx: Convert to immutable irq_chip pinctrl: armada-37xx: Convert to immutable irq_chip pinctrl: nsp: Convert to immutable irq_chip ...
2023-03-07pinctrl: at91-pio4: use proper format specifier for unsigned intClaudiu Beznea
Use %u instead of %d as line is unsigned int. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230302110116.342486-5-claudiu.beznea@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-03-07pinctrl: at91-pio4: use dev_err_probe()Claudiu Beznea
Use dev_err_probe() to simplify the code. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230302110116.342486-4-claudiu.beznea@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-03-07pinctrl: at91-pio4: use device_get_match_data()Claudiu Beznea
Use device_get_match_data() to simplify the code. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230302110116.342486-3-claudiu.beznea@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-03-07pinctrl: at91-pio4: use devm_clk_get_enabled()Claudiu Beznea
Use devm_clk_get_enabled() to simplify the code. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230302110116.342486-2-claudiu.beznea@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-03-06pinctrl: at91-pio4: fix domain name assignmentJohan Hovold
Since commit d59f6617eef0 ("genirq: Allow fwnode to carry name information only") an IRQ domain is always given a name during allocation (e.g. used for the debugfs entry). Drop the no longer valid name assignment, which would lead to an attempt to free a string constant when removing the domain on late probe failures (e.g. probe deferral). Fixes: d59f6617eef0 ("genirq: Allow fwnode to carry name information only") Cc: stable@vger.kernel.org # 4.13 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> # on SAMA7G5 Link: https://lore.kernel.org/r/20230224130828.27985-1-johan+linaro@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-02-06pinctrl: at91: use devm_kasprintf() to avoid potential leaksClaudiu Beznea
Use devm_kasprintf() instead of kasprintf() to avoid any potential leaks. At the moment drivers have no remove functionality thus there is no need for fixes tag. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230203132714.1931596-1-claudiu.beznea@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-10-26Merge tag 'intel-pinctrl-v6.1-2' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel intel-pinctrl for v6.1-2 * Add missing and remove unused headers in the pin control and GPIO drivers * Revise the pin control and GPIO headers
2022-10-24pinctrl: at91: Add missing header(s)Andy Shevchenko
Do not imply that some of the generic headers may be always included. Instead, include explicitly what we are direct user of. While at it, sort headers alphabetically. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2022-10-17pinctrl: at91-pio4: Add persist state case in configRyan Wanner
Adding persist state case to atmel_conf_pin_config_group_set() function. After adding configuration support for userspace gpiod api, there was an extra flag PIN_CONFIG_PERSIST_STATE that was not passed in before. Based on other drivers like TI drivers, added a switch case and return ENOTSUPP in that case. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221007151647.98222-3-Ryan.Wanner@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-10-17pinctrl: at91-pio4: Add configuration to userspaceRyan Wanner
Adding support for line bias flags that have been implented in gpio API. There are functions in the gpiod library that can control line bias from userspace this adds that functionality to this driver. Adding .pin_config_set allows the driver's pin configuration to be accessed from userspace. The general idea for this as been taken from stm32, intel, and rockchip drivers that have userspace access for bias flags. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com> # on sama5d27 som1 ek Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221007151647.98222-2-Ryan.Wanner@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-07-18pinctrl: at91-pio4: remove #ifdef CONFIG_PM_SLEEPClaudiu Beznea
Remove #ifdef CONFIG_PM_SLEEP and use pm_sleep_ptr() macro instead. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220704101253.808519-1-claudiu.beznea@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-01-24pinctrl: at91-pio4: Use platform_get_irq() to get the interruptLad Prabhakar
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). While at it, replace the dev_err() with dev_dbg() as platform_get_irq() prints an error message upon error. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Tested-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20220104140913.29699-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-12-16pinctrl: Get rid of duplicate of_node assignment in the driversAndy Shevchenko
GPIO library does copy the of_node from the parent device of the GPIO chip, there is no need to repeat this in the individual drivers. Remove these assignment all at once. For the details one may look into the of_gpio_dev_init() implementation. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20211214125855.33207-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-04-13pinctrl: at91-pio4: Fix slew rate disablementTudor Ambarus
The slew rate was enabled by default for each configuration of the pin. In case the pin had more than one configuration, even if we set the slew rate as disabled in the device tree, the next pin configuration would set again the slew rate enabled by default, overwriting the slew rate disablement. Instead of enabling the slew rate by default for each pin configuration, enable the slew rate by default just once per pin, regardless of the number of configurations. This way the slew rate disablement will also work for cases where pins have multiple configurations. Fixes: c709135e576b ("pinctrl: at91-pio4: add support for slew-rate") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Link: https://lore.kernel.org/r/20210409082522.625168-1-tudor.ambarus@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-02-12pinctrl: at91-pio4: fix "Prefer 'unsigned int' to bare use of 'unsigned'"Claudiu Beznea
Fix "Prefer 'unsigned int' to bare use of 'unsigned'" checkpatch.pl warning. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Link: https://lore.kernel.org/r/1611747945-29960-4-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-02-12pinctrl: at91-pio4: add support for slew-rateClaudiu Beznea
SAMA7G5 supports slew rate configuration. Adapt the driver for this. For output switching frequencies lower than 50MHz the slew rate needs to be enabled. Since most of the pins on SAMA7G5 fall into this category enabled the slew rate by default. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Link: https://lore.kernel.org/r/1611747945-29960-3-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-24pinctrl: at91-pio4: add support for fewer lines on last PIO bankEugen Hristev
Some products, like sama7g5, do not have a full last bank of PIO lines. In this case for example, sama7g5 only has 8 lines for the PE bank. PA0-31, PB0-31, PC0-31, PD0-31, PE0-7, in total 136 lines. To cope with this situation, added a data attribute that is product dependent, to specify the number of lines of the last bank. In case this number is different from the macro ATMEL_PIO_NPINS_PER_BANK, adjust the total number of lines accordingly. This will avoid advertising 160 lines instead of the actual 136, as this product supports, and to avoid reading/writing to invalid register addresses. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Link: https://lore.kernel.org/r/20201113132429.420940-1-eugen.hristev@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-11pinctrl: pinctrl-at91-pio4: Set irq handler and data in one goMartin Kaiser
Replace the two separate calls for setting the irq handler and data with a single irq_set_chained_handler_and_data() call. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20201108180144.28594-1-martin@kaiser.cx Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-29pinctrl: at91-pio4: add support for sama7g5 SoCEugen Hristev
Add support for sama7g5 pinctrl block, which has 5 PIO banks. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Link: https://lore.kernel.org/r/20200917131257.273882-2-eugen.hristev@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: pinctrl-at91-pio4: PM related attribute descriptionsLee Jones
Fixes the following W=1 kernel build warning(s): drivers/pinctrl/pinctrl-at91-pio4.c:132: warning: Function parameter or member 'pm_wakeup_sources' not described in 'atmel_pioctrl' drivers/pinctrl/pinctrl-at91-pio4.c:132: warning: Function parameter or member 'pm_suspend_backup' not described in 'atmel_pioctrl' Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200713144930.1034632-16-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-25pinctrl: Fix return value about devm_platform_ioremap_resource()Tiezhu Yang
When call function devm_platform_ioremap_resource(), we should use IS_ERR() to check the return value and return PTR_ERR() if failed. Fixes: 4b024225c4a8 ("pinctrl: use devm_platform_ioremap_resource() to simplify code") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Link: https://lore.kernel.org/r/1590234326-2194-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-05pinctrl: use devm_platform_ioremap_resource() to simplify codeYueHaibing
devm_platform_ioremap_resource() internally have platform_get_resource() and devm_ioremap_resource() in it. So instead of calling them separately use devm_platform_ioremap_resource() directly. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20191104142654.39256-1-yuehaibing@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-03pinctrl: at91-pio4: implement .get_multiple and .set_multipleAlexandre Belloni
Implement .get_multiple and .set_multiple to allow reading or setting multiple pins simultaneously. Pins in the same bank will all be switched at the same time, improving synchronization and performances. Keep the driver future proof by allowing its use on 64bits platforms if they ever appear with this IP and we end up with a mismatch between ATMEL_PIO_NPINS_PER_BANK and BITS_PER_LONG. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Link: https://lore.kernel.org/r/20190918113657.25998-1-alexandre.belloni@bootlin.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282Thomas Gleixner
Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-05pinctrl: pinctrl-at91-pio4: simplify getting .driver_dataWolfram Sang
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-14pinctrl: at91-pio4: Get rid of legacy callLinus Walleij
By just moving the atmel_gpio_to_irq() and calling the internal function we can get rid of the driver calling back out into the deprecated external consumer API. Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-13pinctrl: at91-pio4: fix has_config check in atmel_pctl_dt_subnode_to_map()Dan Carpenter
Smatch complains about this condition: if (has_config && num_pins >= 1) The "has_config" variable is either uninitialized or true. The "num_pins" variable is unsigned and we verified that it is non-zero on the lines before so we know "num_pines >= 1" is true. Really, we could just check "num_configs" directly and remove the "has_config" variable. Fixes: 776180848b57 ("pinctrl: introduce driver for Atmel PIO4 controller") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-16pinctrl: at91-pio4: Remove redundant return value checkWei Yongjun
Remove unneeded error handling on the result of a call to platform_get_resource() when the value is passed to devm_ioremap_resource(). Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-16pinctrl: at91-pio4: add support for drive strengthLudovic Desroches
Add support for the drive strength configuration. Usually, this value is expressed in mA. Since the numeric value depends on VDDIOP voltage, a value we can't retrieve at runtime, the controller uses low, medium and high to define the drive strength. The PIO controller accepts two values for the low drive configuration: 0 and 1. Most of the time, we don't care about the drive strength. So we keep the default value which is 0. The drive strength is advertised through the sysfs only when it has been explicitly set in the device tree i.e. if its value is different from 0. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-24pinctrl: at91-pio4: add missing of_node_putJulia Lawall
The device node iterators perform an of_node_get on each iteration, so a jump out of the loop requires an of_node_put. The semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression root,e; local idexpression child; iterator name for_each_child_of_node; @@ for_each_child_of_node(root, child) { ... when != of_node_put(child) when != e = child + of_node_put(child); ? break; ... } ... when != child // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-08pinctrl: at91-pio4: account for const type of of_device_id.dataJulia Lawall
This driver creates a const structure that it stores in the data field of an of_device_id array. Adding const to the declaration of the location that receives the const value from the data field ensures that the compiler will continue to check that the value is not modified. Furthermore, the const-discarding cast on the extraction from the data field is no longer needed. Done using Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-14pinctrl: Convert to using %pOF instead of full_nameRob Herring
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Lee Jones <lee@kernel.org> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Barry Song <baohua@kernel.org> Cc: linux-gpio@vger.kernel.org Cc: linux-rpi-kernel@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: kernel@stlinux.com Cc: linux-samsung-soc@vger.kernel.org Cc: linux-renesas-soc@vger.kernel.org Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Eric Anholt <eric@anholt.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-07pinctrl: at91-pio4: handle suspend to ramAlexandre Belloni
When suspending to RAM, the power to the core is cut and the register values are lost. Save and restore more registers than just IMR. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-13pinctrl: at91-pio4: make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/Kconfig:config PINCTRL_AT91PIO4 drivers/pinctrl/Kconfig: bool "AT91 PIO4 pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-08pinctrl: at91-pio4: fix non-exported functionsBen Dooks
The atmel_pctl_find_group_by_pin() and the atmel_pinctrl_remove() functions are not exported, so fix the warnings about these being exported without definitions by making them static. drivers/pinctrl/pinctrl-at91-pio4.c:424:20: warning: symbol 'atmel_pctl_find_group_by_pin' was not declared. Should it be static? drivers/pinctrl/pinctrl-at91-pio4.c:1077:5: warning: symbol 'atmel_pinctrl_remove' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-19Merge tag 'pinctrl-v4.7-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This kernel cycle was quite calm when it comes to pin control and there is really just one major change, and that is the introduction of devm_pinctrl_register() managed resources. Apart from that linear development, details below. Core changes: - Add the devm_pinctrl_register() API and switch all applicable drivers to use it, saving lots of lines of code all over the place. New drivers: - driver for the Broadcom NS2 SoC - subdriver for the PXA25x SoCs - subdriver for the AMLogic Meson GXBB SoC Driver improvements: - the Intel Baytrail driver now properly supports pin control - Nomadik, Rockchip, Broadcom BCM2835 support the .get_direction() callback in the GPIO portions - continued development and stabilization of several SH-PFC SoC subdrivers: r8a7795, r8a7790, r8a7794 etc" * tag 'pinctrl-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (85 commits) Revert "pinctrl: tegra: avoid parked_reg and parked_bank" pinctrl: meson: Fix eth_tx_en bit index pinctrl: tegra: avoid parked_reg and parked_bank pinctrl: tegra: Correctly check the supported configuration pinctrl: amlogic: Add support for Amlogic Meson GXBB SoC pinctrl: rockchip: fix pull setting error for rk3399 pinctrl: stm32: Implement .pin_config_dbg_show() pinctrl: nomadik: hide nmk_gpio_get_mode when unused pinctrl: ns2: rename pinctrl_utils_dt_free_map pinctrl: at91: Merge clk_prepare and clk_enable into clk_prepare_enable pinctrl: at91: Make at91_gpio_template const pinctrl: baytrail: fix some error handling in debugfs pinctrl: ns2: add pinmux driver support for Broadcom NS2 SoC pinctrl: sirf/atlas7: trivial fix of spelling mistake on flagged pinctrl: sh-pfc: Kill unused variable in sh_pfc_remove() pinctrl: nomadik: implement .get_direction() pinctrl: nomadik: use BIT() with offsets consequently pinctrl: exynos5440: Use off-stack memory for pinctrl_gpio_range pinctrl: zynq: Use devm_pinctrl_register() for pinctrl registration pinctrl: u300: Use devm_pinctrl_register() for pinctrl registration ...
2016-04-29pinctrl: at91-pio4: fix pull-up/down logicLudovic Desroches
The default configuration of a pin is often with a value in the pull-up/down field at chip reset. So, even if the internal logic of the controller prevents writing a configuration with pull-up and pull-down at the same time, we must ensure explicitly this condition before writing the register. This was leading to a pull-down condition not taken into account for instance. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Fixes: 776180848b57 ("pinctrl: introduce driver for Atmel PIO4 controller") Cc: stable@vger.kernel.org #v4.4 and later Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-21pinctrl: at91-pio4: Use devm_pinctrl_register() for pinctrl registrationLaxman Dewangan
Use devm_pinctrl_register() for pin control registration and clean error path. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-01pinctrl: Rename pinctrl_utils_dt_free_map to pinctrl_utils_free_mapIrina Tirdea
Rename pinctrl_utils_dt_free_map to pinctrl_utils_free_map, since it does not depend on device tree despite the current name. This will enforce a consistent naming in pinctr-utils.c and will make it clear it can be called from outside device tree (e.g. from ACPI handling code). Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 23:08:39 +0000