summaryrefslogtreecommitdiff
path: root/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
AgeCommit message (Collapse)Author
2022-11-24phy: qcom-qmp-combo: fix runtime suspendJohan Hovold
Drop the confused runtime-suspend type check which effectively broke runtime PM if the DP child node happens to be parsed before the USB child node during probe (e.g. due to order of child nodes in the devicetree). Instead use the new driver data USB PHY pointer to access the USB configuration and resources. Fixes: 52e013d0bffa ("phy: qcom-qmp: Add support for DP in USB3+DP combo phy") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20221114081346.5116-6-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-24phy: qcom-qmp-combo: fix broken power onJohan Hovold
The PHY is powered on during phy-init by setting the SW_PWRDN bit in the COM_POWER_DOWN_CTRL register and then setting the same bit in the in the PCS_POWER_DOWN_CONTROL register that belongs to the USB part of the PHY. Currently, whether power on succeeds depends on probe order and having the USB part of the PHY be initialised first. In case the DP part of the PHY is instead initialised first, the intended power on of the USB block results in a corrupted DP_PHY register (e.g. DP_PHY_AUX_CFG8). Add a pointer to the USB part of the PHY to the driver data and use that to power on the PHY also if the DP part of the PHY is initialised first. Fixes: 52e013d0bffa ("phy: qcom-qmp: Add support for DP in USB3+DP combo phy") Cc: stable@vger.kernel.org # 5.10 Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20221114081346.5116-5-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-24phy: qcom-qmp-combo: fix sc8180x resetJohan Hovold
The SC8180X has two resets but the DP configuration erroneously described only one. In case the DP part of the PHY is initialised before the USB part (e.g. depending on probe order), then only the first reset would be asserted. Fixes: 1633802cd4ac ("phy: qcom: qmp: Add SC8180x USB/DP combo") Cc: stable@vger.kernel.org # 5.15 Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20221114081346.5116-4-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-24phy: qcom-qmp-combo: fix sdm845 resetJohan Hovold
The SDM845 has two resets but the DP configuration erroneously described only one. In case the DP part of the PHY is initialised before the USB part (e.g. depending on probe order), then only the first reset would be asserted. Add a dedicated configuration for SDM845 rather than reuse the incompatible SC7180 configuration. Fixes: d88497fb6bbd ("phy: qualcomm: phy-qcom-qmp: add support for combo USB3+DP phy on SDM845") Cc: stable@vger.kernel.org # 6.1 Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20221114081346.5116-3-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-24phy: qcom-qmp-combo: fix out-of-bounds clock accessJohan Hovold
The SM8250 only uses three clocks but the DP configuration erroneously described four clocks. In case the DP part of the PHY is initialised before the USB part, this would lead to uninitialised memory beyond the bulk-clocks array to be treated as a clock pointer as the clocks are requested based on the USB configuration. Fixes: aff188feb5e1 ("phy: qcom-qmp: add support for sm8250-usb3-dp phy") Cc: stable@vger.kernel.org # 5.13 Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20221114081346.5116-2-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-10-28Merge branch 'fixes' into nextVinod Koul
Merge the fixes to next as both carry qmp-phy patches
2022-10-28phy: qcom-qmp-combo: fix NULL-deref on runtime resumeJohan Hovold
Commit fc64623637da ("phy: qcom-qmp-combo,usb: add support for separate PCS_USB region") started treating the PCS_USB registers as potentially separate from the PCS registers but used the wrong base when no PCS_USB offset has been provided. Fix the PCS_USB base used at runtime resume to prevent dereferencing a NULL pointer on platforms that do not provide a PCS_USB offset (e.g. SC7180). Fixes: fc64623637da ("phy: qcom-qmp-combo,usb: add support for separate PCS_USB region") Cc: stable@vger.kernel.org # 5.20 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20221026162116.26462-1-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-10-28phy: qcom-qmp-combo: drop start and pwrdn-ctrl abstractionJohan Hovold
All USB PHYs need to start and stop the SerDes and PCS so drop the start-ctrl abstraction which is no longer needed since the QMP driver split. Similarly, drop the pwrdn-ctrl abstraction which also is not needed since the split. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20221012085002.24099-15-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-10-28phy: qcom-qmp-combo: increase status polling periodJohan Hovold
It typically takes between one and two milliseconds for the PHY to become ready after starting it. Increase the tight 3--10 us polling period to the more reasonable 51--200 us. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20221012085002.24099-9-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-10-28phy: qcom-qmp-combo: clean up status pollingJohan Hovold
Clean up the PHY status polling by dropping the configuration mask which is no longer needed since the QMP driver split. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20221012085002.24099-8-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-10-28phy: qcom-qmp-combo: drop power-down delay configJohan Hovold
The power-down delay was included in the first version of the QMP driver as an optional delay after powering on the PHY (using POWER_DOWN_CONTROL) and just before starting it. Later changes modified this sequence by powering on before initialising the PHY, but the optional delay stayed where it was (i.e. before starting the PHY). The vendor driver does not use a delay before starting the PHY and this is likely not needed on any platform unless there is a corresponding delay in the vendor kernel init sequence tables (i.e. in devicetree). Let's keep the delay for now, but drop the redundant delay period configuration while increasing the unnecessarily low timer slack somewhat. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20221012081241.18273-13-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-10-28phy: qcom-qmp-combo: drop sc8280xp power-down delayJohan Hovold
The SC8280XP combo PHY does not need a delay before starting the USB PHY (which is what the has_pwrdn_delay config option really controls) so drop the unnecessary delay. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20221012081241.18273-12-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-10-28phy: qcom-qmp-combo: drop unused in-layout configurationJohan Hovold
The QMP combo PHY driver does not use the "in-layout" configuration macro to configure registers that are typically accessed using "regs_layout" arrays (e.g. QPHY_START_CTRL) so drop this unused feature. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20221012081241.18273-4-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-10-28phy: qcom-qmp: drop superfluous commentsJohan Hovold
Drop some unnecessary or incorrect comments. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20221012081241.18273-3-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-10-28phy: qcom-qmp: drop regulator error messageJohan Hovold
Regulator core already logs an error message in case requesting a regulator fails so drop the mostly redundant error message from probe. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20221012081241.18273-2-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-10-17phy: qcom-qmp-combo: clean up power-down handlingJohan Hovold
Always define the POWER_DOWN_CONTROL register instead of falling back to the v2 (and v3) offset during power on and power off. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20221017065013.19647-8-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-10-17phy: qcom-qmp-combo: drop unused UFS resetJohan Hovold
Drop the unused UFS reset code which isn't used since the QMP driver split. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20221017065013.19647-3-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-10-17phy: qcom-qmp: fix obsolete lane commentsJohan Hovold
All QMP drivers but the MSM8996 and combo ones handle exactly one PHY and the corresponding memory resources are not per-lane, but per PHY. Update the obsolete comments. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20221017065013.19647-2-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-24phy: qcom-qmp-combo: Use dev_err_probe() to simplify codeYuan Can
In the probe path, dev_err() can be replaced with dev_err_probe() which will check if error code is -EPROBE_DEFER and prints the error name. It also sets the defer probe reason which can be checked later through debugfs. Signed-off-by: Yuan Can <yuancan@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20220924070300.25080-2-yuancan@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-24phy: qcom-qmp-combo: drop redundant DP config flagJohan Hovold
Drop the DP_COM control block flag from the configuration data, which is set for all combo PHYs and hence no longer needed since the QMP driver split. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20220920073826.20811-18-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-24phy: qcom-qmp-combo: consolidate lane configJohan Hovold
For legacy reasons, there are two configuration parameters that appear to describe the number of lanes a PHY has, even if "nlanes" was actually used for a different purpose. Replace them both with a new field simply named "lanes". Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20220920073826.20811-15-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-24phy: qcom-qmp: drop unused index fieldJohan Hovold
Only the MSM8996 PCIe QMP driver uses the index field so drop it from the other drivers. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20220920073826.20811-12-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-20phy: qcom-qmp-combo: fix sc8280xp PCS_USB offsetJohan Hovold
The PCS_USB register block lives at an offset of 0x300 from the PCS region on SC8280XP so add the missing offset to avoid corrupting unrelated registers on runtime suspend. Note that this region should probably be described separately in the binding. Fixes: a2e927b0e50d ("phy: qcom-qmp-combo: Add sc8280xp USB/DP combo phys") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220919095700.2228-1-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-20phy: qcom-qmp-combo: drop unused legacy DT workaroundJohan Hovold
Commit 5e17b95d9893 ("phy: qcom-qmp: Utilize fully-specified DT registers") added a workaround for legacy devicetrees which did not specify register regions for the second lane of some dual-lane PHYs. At the time, the only two dual-lane PHYs supported by mainline were "qcom,sdm845-qmp-usb3-phy" and "qcom,sdm845-qmp-ufs-phy", neither of which is a combo PHY. Drop the workaround for malformed devicetrees, which should no longer be needed since the QMP driver split. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220916102340.11520-10-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-20phy: qcom-qmp-combo: fix memleak on probe deferralJohan Hovold
Switch to using the device-managed of_iomap helper to avoid leaking memory on probe deferral and driver unbind. Note that this helper checks for already reserved regions and may fail if there are multiple devices claiming the same memory. Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220916102340.11520-5-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-20phy: qcom-qmp-combo: shorten function prefixesJohan Hovold
The driver function prefix has gotten unnecessarily long and hurts readability. Shorten "qcom_qmp_phy_" to "qmp_" (which likely stands for "Qualcomm Multi PHY" or similar anyway). Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220907110728.19092-13-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-20phy: qcom-qmp: silence noisy probeJohan Hovold
Drivers should in general not log anything during unless there are errors. Drop the pointless registration info message from the QMP drivers. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220907110728.19092-12-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-20phy: qcom-qmp-combo: drop unused definesJohan Hovold
Drop defines and enums that are unused since the QMP driver split. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220907110728.19092-3-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-20phy: qcom-qmp-combo: disable runtime PM on unbindJohan Hovold
Make sure to disable runtime PM also on driver unbind. Fixes: ac0d239936bd ("phy: qcom-qmp: Add support for runtime PM"). Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220907110728.19092-2-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-13phy: qcom-qmp: drop dual-lane commentsJohan Hovold
Drop the obsolete and misleading dual-lane comments which gave the impression that only combo PHYs have a second lane. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220906074550.4383-4-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-08-30phy: qcom-qmp-combo: drop pipe clock lane suffixJohan Hovold
The pipe clock is defined in the "lane" node so there's no need to keep adding a redundant lane-number suffix to the clock name. Update driver to support the new binding where the pipe clock name has been deprecated by instead requesting the clock by index. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220830112923.3725-28-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-08-30phy: qcom-qmp-combo: drop unused lane resetJohan Hovold
Drop the unused lane reset pointer which isn't used by any combo PHY. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220830112923.3725-27-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-08-30phy: qcom-qmp-combo: Add sc8280xp USB/DP combo physBjorn Andersson
The SC8280P has two copies of an USB/DP compbo PHY, add support for this to the Qualcomm QMP PHY driver. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220810042303.3583194-5-bjorn.andersson@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-08-30phy: qcom-qmp-combo: Parameterize swing and pre_emphasis tablesBjorn Andersson
The swing and pre-emphasis tables differ between different PHY versions, or perhaps between different platforms. In particular in order to introduce SC8280XP these tables needs to be replaced. Make it possible to specify these tables per PHY config. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220810042303.3583194-3-bjorn.andersson@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-08-30phy: qualcomm: phy-qcom-qmp: add support for combo USB3+DP phy on SDM845Dmitry Baryshkov
Define configuration to be used by combo USB3 + DisplayPort phy on SDM845 SoC family. It closely follows sc7180, however like the main USB3 phy it uses the qmp_v3_usb3phy_cfg config. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220810030926.2794179-1-bjorn.andersson@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-15phy: qcom-qmp-usb: statify qmp_phy_vreg_lVinod Koul
qmp_phy_vreg_l should be marked static, this resolves warning: drivers/phy/qualcomm/phy-qcom-qmp-combo.c:616:27: warning: symbol 'qmp_phy_vreg_l' was not declared. Should it be static? Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20220708052059.3049443-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp-usb: define QPHY_V2_PCS_PLL_LOCK_CHK_DLY_TIME registerDmitry Baryshkov
Other PHYs tables directly reference QPHY_PLL_LOCK_CHK_DLY_TIME register without using reglayout. Define corresponding register to be used by msm8996 PHY tables and use it directly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-29-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp-usb: replace FLL layout writes for msm8996Dmitry Baryshkov
Other PHYs tables directly reference FLL registers without using reglayout. Define corresponding registers to be used by msm8996 PHY tables and use them directly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-28-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp: rename QMP V2 PCS registersDmitry Baryshkov
Rename QMP V2 PCS registers to follow the usual pattern of QPHY_V2_PCS_*. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-7-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp-combo,usb: add support for separate PCS_USB regionDmitry Baryshkov
Different QMP USB PHYs might have different offset from PCS to PCS_USB register space, but the same PCS_USB register layout. Add separate PCS_USB region space and merge related PCS_USB definitions. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220705094320.1313312-4-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-07phy: qcom-qmp: add regulator_set_load to dp phyKuogee Hsieh
This patch add regulator_set_load() before enable regulator at DP phy driver. Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/1657038556-2231-3-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09phy: qcom-qmp-combo: use bulk reset_control APIDmitry Baryshkov
Switch qcom-qmp-combo driver to use reset_control_bulk_assert / _deassert functions rather than hardcoding the loops in the driver itself. Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220607213203.2819885-28-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09phy: qcom-qmp-combo: cleanup the driverDmitry Baryshkov
Remove the conditionals and options that are not used by any of combo USB+DP PHY devices. Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220607213203.2819885-20-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09phy: qcom-qmp-combo: drop support for PCIe,UFS PHY typesDmitry Baryshkov
Drop remaining support for unused PHY types (PCIe, UFS). Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220607213203.2819885-15-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09phy: qcom-qmp-combo: change symbol prefix to qcom_qmp_phy_comboDmitry Baryshkov
Change all symbol names to start with qcom_qmp_phy_combo_ rather than old qcom_qmp_phy_ Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220607213203.2819885-8-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09phy: qcom-qmp-combo: drop all non-combo compatibles supportDmitry Baryshkov
Drop support for all non-USB+DP compatibles from the new qmp-combo driver. Currently this will result in duplication (both in terms of code and in terms of config tables) with USB PHY support. This will be sorted out later, after fixing the combo PHY init/reinit issues. Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220607213203.2819885-7-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09phy: qcom-qmp: create copies of QMP PHY driverDmitry Baryshkov
In order to split and cleanup the single monstrous QMP PHY driver, create blind copies of the current file. They will be used for: - PCIe (and a separate msm8996 PCIe PHY driver) - UFS - USB - Combo DP + USB Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220607213203.2819885-2-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 09:46:52 +0000