| Age | Commit message (Collapse) | Author |
|---|
|
Pull block updates from Jens Axboe:
- ublk updates:
- Add support for updating the size of a ublk instance
- Zero-copy improvements
- Auto-registering of buffers for zero-copy
- Series simplifying and improving GET_DATA and request lookup
- Series adding quiesce support
- Lots of selftests additions
- Various cleanups
- NVMe updates via Christoph:
- add per-node DMA pools and use them for PRP/SGL allocations
(Caleb Sander Mateos, Keith Busch)
- nvme-fcloop refcounting fixes (Daniel Wagner)
- support delayed removal of the multipath node and optionally
support the multipath node for private namespaces (Nilay Shroff)
- support shared CQs in the PCI endpoint target code (Wilfred
Mallawa)
- support admin-queue only authentication (Hannes Reinecke)
- use the crc32c library instead of the crypto API (Eric Biggers)
- misc cleanups (Christoph Hellwig, Marcelo Moreira, Hannes
Reinecke, Leon Romanovsky, Gustavo A. R. Silva)
- MD updates via Yu:
- Fix that normal IO can be starved by sync IO, found by mkfs on
newly created large raid5, with some clean up patches for bdev
inflight counters
- Clean up brd, getting rid of atomic kmaps and bvec poking
- Add loop driver specifically for zoned IO testing
- Eliminate blk-rq-qos calls with a static key, if not enabled
- Improve hctx locking for when a plug has IO for multiple queues
pending
- Remove block layer bouncing support, which in turn means we can
remove the per-node bounce stat as well
- Improve blk-throttle support
- Improve delay support for blk-throttle
- Improve brd discard support
- Unify IO scheduler switching. This should also fix a bunch of lockdep
warnings we've been seeing, after enabling lockdep support for queue
freezing/unfreezeing
- Add support for block write streams via FDP (flexible data placement)
on NVMe
- Add a bunch of block helpers, facilitating the removal of a bunch of
duplicated boilerplate code
- Remove obsolete BLK_MQ pci and virtio Kconfig options
- Add atomic/untorn write support to blktrace
- Various little cleanups and fixes
* tag 'for-6.16/block-20250523' of git://git.kernel.dk/linux: (186 commits)
selftests: ublk: add test for UBLK_F_QUIESCE
ublk: add feature UBLK_F_QUIESCE
selftests: ublk: add test case for UBLK_U_CMD_UPDATE_SIZE
traceevent/block: Add REQ_ATOMIC flag to block trace events
ublk: run auto buf unregisgering in same io_ring_ctx with registering
io_uring: add helper io_uring_cmd_ctx_handle()
ublk: remove io argument from ublk_auto_buf_reg_fallback()
ublk: handle ublk_set_auto_buf_reg() failure correctly in ublk_fetch()
selftests: ublk: add test for covering UBLK_AUTO_BUF_REG_FALLBACK
selftests: ublk: support UBLK_F_AUTO_BUF_REG
ublk: support UBLK_AUTO_BUF_REG_FALLBACK
ublk: register buffer to local io_uring with provided buf index via UBLK_F_AUTO_BUF_REG
ublk: prepare for supporting to register request buffer automatically
ublk: convert to refcount_t
selftests: ublk: make IO & device removal test more stressful
nvme: rename nvme_mpath_shutdown_disk to nvme_mpath_remove_disk
nvme: introduce multipath_always_on module param
nvme-multipath: introduce delayed removal of the multipath head node
nvme-pci: derive and better document max segments limits
nvme-pci: use struct_size for allocation struct nvme_dev
...
|
|
Commit 4dbd2b2ebe4c ("nvme-multipath: Add visibility for round-robin
io-policy") introduced the creation of the multipath sysfs group under
the NVMe head gendisk device node. However, it also inadvertently added
the same sysfs group under each namespace path device which head node
refers to and that is incorrect.
The multipath sysfs group should only be exposed through the namespace
head gendisk node. This is sufficient, as the head device already
provides symbolic links to the individual namespace paths it manages.
This patch fixes the issue by preventing the creation of the multipath
sysfs group under namespace path devices, ensuring it only appears under
the head disk node.
Fixes: 4dbd2b2ebe4c ("nvme-multipath: Add visibility for round-robin io-policy")
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Currently, the multipath head node of an NVMe disk is removed
immediately as soon as all paths of the disk are removed. However,
this can cause issues in scenarios where:
- The disk hot-removal followed by re-addition.
- Transient PCIe link failures that trigger re-enumeration,
temporarily removing and then restoring the disk.
In these cases, removing the head node prematurely may lead to a head
disk node name change upon re-addition, requiring applications to
reopen their handles if they were performing I/O during the failure.
To address this, introduce a delayed removal mechanism of head disk
node. During transient failure, instead of immediate removal of head
disk node, the system waits for a configurable timeout, allowing the
disk to recover.
During transient disk failure, if application sends any IO then we
queue it instead of failing such IO immediately. If the disk comes back
online within the timeout, the queued IOs are resubmitted to the disk
ensuring seamless operation. In case disk couldn't recover from the
failure then queued IOs are failed to its completion and application
receives the error.
So this way, if disk comes back online within the configured period,
the head node remains unchanged, ensuring uninterrupted workloads
without requiring applications to reopen device handles.
A new sysfs attribute, named "delayed_removal_secs" is added under head
disk blkdev for user who wish to configure time for the delayed removal
of head disk node. The default value of this attribute is set to zero
second ensuring no behavior change unless explicitly configured.
Link: https://lore.kernel.org/linux-nvme/Y9oGTKCFlOscbPc2@infradead.org/
Link: https://lore.kernel.org/linux-nvme/Y+1aKcQgbskA2tra@kbusch-mbp.dhcp.thefacebook.com/
Suggested-by: Keith Busch <kbusch@kernel.org>
Suggested-by: Christoph Hellwig <hch@infradead.org>
[nilay: reworked based on the original idea/POC from Christoph and Keith]
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This patch helps add nvme native multipath visibility for queue-depth
io-policy. It adds a new attribute file named "queue_depth" under
namespace device path node which would print the number of active/
in-flight I/O requests currently queued for the given path.
For instance, if we have a shared namespace accessible from two different
controllers/paths then accessing head block node of the shared namespace
would show the following output:
$ ls -l /sys/block/nvme1n1/multipath/
nvme1c1n1 -> ../../../../../pci052e:78/052e:78:00.0/nvme/nvme1/nvme1c1n1
nvme1c3n1 -> ../../../../../pci058e:78/058e:78:00.0/nvme/nvme3/nvme1c3n1
In the above example, nvme1n1 is head gendisk node created for a shared
namespace and the namespace is accessible from nvme1c1n1 and nvme1c3n1
paths. For queue-depth io-policy we can then refer the "queue_depth"
attribute file created under each namespace path:
$ cat /sys/block/nvme1n1/multipath/nvme1c1n1/queue_depth
518
$cat /sys/block/nvme1n1/multipath/nvme1c3n1/queue_depth
504
>From the above output, we can infer that I/O workload targeted at nvme1n1
uses two paths nvme1c1n1 and nvme1c3n1 and the current queue depth of each
path is 518 and 504 respectively. Reading "queue_depth" file when
configured io-policy is anything but queue-depth would show no output.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This patch helps add nvme native multipath visibility for numa io-policy.
It adds a new attribute file named "numa_nodes" under namespace gendisk
device path node which prints the list of numa nodes preferred by the
given namespace path. The numa nodes value is comma delimited list of
nodes or A-B range of nodes.
For instance, if we have a shared namespace accessible from two different
controllers/paths then accessing head node of the shared namespace would
show the following output:
$ ls -l /sys/block/nvme1n1/multipath/
nvme1c1n1 -> ../../../../../pci052e:78/052e:78:00.0/nvme/nvme1/nvme1c1n1
nvme1c3n1 -> ../../../../../pci058e:78/058e:78:00.0/nvme/nvme3/nvme1c3n1
In the above example, nvme1n1 is head gendisk node created for a shared
namespace and this namespace is accessible from nvme1c1n1 and nvme1c3n1
paths. For numa io-policy we can then refer the "numa_nodes" attribute
file created under each namespace path:
$ cat /sys/block/nvme1n1/multipath/nvme1c1n1/numa_nodes
0-1
$ cat /sys/block/nvme1n1/multipath/nvme1c3n1/numa_nodes
2-3
>From the above output, we infer that I/O workload targeted at nvme1n1
and running on numa nodes 0 and 1 would prefer using path nvme1c1n1.
Similarly, I/O workload running on numa nodes 2 and 3 would prefer
using path nvme1c3n1. Reading "numa_nodes" file when configured
io-policy is anything but numa would show no output.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This patch helps add nvme native multipath visibility for round-robin
io-policy. It creates a "multipath" sysfs directory under head gendisk
device node directory and then from "multipath" directory it adds a link
to each namespace path device the head node refers.
For instance, if we have a shared namespace accessible from two different
controllers/paths then we create a soft link to each path device from head
disk node as shown below:
$ ls -l /sys/block/nvme1n1/multipath/
nvme1c1n1 -> ../../../../../pci052e:78/052e:78:00.0/nvme/nvme1/nvme1c1n1
nvme1c3n1 -> ../../../../../pci058e:78/058e:78:00.0/nvme/nvme3/nvme1c3n1
In the above example, nvme1n1 is head gendisk node created for a shared
namespace and the namespace is accessible from nvme1c1n1 and nvme1c3n1
paths.
For round-robin I/O policy, we could easily infer from the above output
that I/O workload targeted to nvme1n1 would toggle across paths nvme1c1n1
and nvme1c3n1.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Add a fabrics option 'concat' to request secure channel concatenation as
specified the NVME Base Specification v2.1, section 8.3.4.3: Secure Channel
Concatenation.
When secure channel concatenation is enabled a 'generated PSK' is inserted
into the keyring such that it's available after reset.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
To suppress the compiler "warning: symbol 'nvme_tls_attrs_group' was not
declared. Should it be static?"
Fixes: 1e48b34c9bc79a ("nvme: split off TLS sysfs attributes into a separate group")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Commit 1e48b34c9bc7 ("nvme: split off TLS sysfs attributes into a
separate group") introduced the struct attribute array nvme_tls_attrs.
However, the array was not null terminated and caused BUG KASAN global-
out-of-bounds. To avoid the BUG, null terminate the array.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/linux-nvme/jhllwfxcedrcxcnbajwl4x2l2ujcqowqcd4ps574zrafrqhjna@f4icvecutekm/
Fixes: 1e48b34c9bc7 ("nvme: split off TLS sysfs attributes into a separate group")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Add a 'tls_keyring' attribute to display the contents of the
--keyring option from the connect string. Adding this attribute
allows us to recreate the original connect string from sysfs
settings.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
There is a difference between the negotiated TLS key (which is
always present for a TLS encrypted connection) and the configured
TLS key (which is specified with the --tls_key command line option).
To differentate between these two add a new sysfs attribute
'tls_configured_key' to hold the specified on the command line.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Split off TLS sysfs attributes into a separate group to improve
readability and to keep all TLS related handling in one section.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Print a newline for easier userspace handling.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
There is a difference between TLS configured (ie the user has
provisioned/requested a key) and TLS enabled (ie the connection
is encrypted with TLS). This becomes important for secure concatenation,
where the initial authentication is run on an unencrypted connection
(ie with TLS configured, but not enabled), and then the queue is reset to
run over TLS (ie TLS configured _and_ enabled).
So to differentiate between those two states store the generated
key in opts->tls_key (as we're using the same TLS key for all queues),
the key serial of the resulting TLS handshake in ctrl->tls_pskid
(to signal that TLS on the admin queue is enabled), and a simple
flag for the queues to indicated that TLS has been enabled.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Use disk directly instead of getting it from bdev->bd_disk.
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Pull NVMe fixes from Keith:
"nvme updates for Linux 6.9
- Make an informative message less ominous (Keith)
- Enhanced trace decoding (Guixin)
- TCP updates (Hannes, Li)
- Fabrics connect deadlock fix (Chunguang)
- Platform API migration update (Uwe)
- A new device quirk (Jiawei)"
* tag 'nvme-6.9-2024-03-21' of git://git.infradead.org/nvme:
nvmet-rdma: remove NVMET_RDMA_REQ_INVALIDATE_RKEY flag
nvme: remove redundant BUILD_BUG_ON check
nvme/tcp: Add wq_unbound modparam for nvme_tcp_wq
nvme-tcp: Export the nvme_tcp_wq to sysfs
drivers/nvme: Add quirks for device 126f:2262
nvme: parse format command's lbafu when tracing
nvme: add tracing of reservation commands
nvme: parse zns command's zsa and zrasf to string
nvme: use nvme_disk_is_ns_head helper
nvme: fix reconnection fail due to reserved tag allocation
nvmet: add tracing of zns commands
nvmet: add tracing of authentication commands
nvme-apple: Convert to platform remove callback returning void
nvmet-tcp: do not continue for invalid icreq
nvme: change shutdown timeout setting message
|
|
Use nvme_disk_is_ns_head helper instead of check fops directly,
and also drop CONFIG_NVME_MULTIPATH check.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Pull block updates from Jens Axboe:
- MD pull requests via Song:
- Cleanup redundant checks (Yu Kuai)
- Remove deprecated headers (Marc Zyngier, Song Liu)
- Concurrency fixes (Li Lingfeng)
- Memory leak fix (Li Nan)
- Refactor raid1 read_balance (Yu Kuai, Paul Luse)
- Clean up and fix for md_ioctl (Li Nan)
- Other small fixes (Gui-Dong Han, Heming Zhao)
- MD atomic limits (Christoph)
- NVMe pull request via Keith:
- RDMA target enhancements (Max)
- Fabrics fixes (Max, Guixin, Hannes)
- Atomic queue_limits usage (Christoph)
- Const use for class_register (Ricardo)
- Identification error handling fixes (Shin'ichiro, Keith)
- Improvement and cleanup for cached request handling (Christoph)
- Moving towards atomic queue limits. Core changes and driver bits so
far (Christoph)
- Fix UAF issues in aoeblk (Chun-Yi)
- Zoned fix and cleanups (Damien)
- s390 dasd cleanups and fixes (Jan, Miroslav)
- Block issue timestamp caching (me)
- noio scope guarding for zoned IO (Johannes)
- block/nvme PI improvements (Kanchan)
- Ability to terminate long running discard loop (Keith)
- bdev revalidation fix (Li)
- Get rid of old nr_queues hack for kdump kernels (Ming)
- Support for async deletion of ublk (Ming)
- Improve IRQ bio recycling (Pavel)
- Factor in CPU capacity for remote vs local completion (Qais)
- Add shared_tags configfs entry for null_blk (Shin'ichiro
- Fix for a regression in page refcounts introduced by the folio
unification (Tony)
- Misc fixes and cleanups (Arnd, Colin, John, Kunwu, Li, Navid,
Ricardo, Roman, Tang, Uwe)
* tag 'for-6.9/block-20240310' of git://git.kernel.dk/linux: (221 commits)
block: partitions: only define function mac_fix_string for CONFIG_PPC_PMAC
block/swim: Convert to platform remove callback returning void
cdrom: gdrom: Convert to platform remove callback returning void
block: remove disk_stack_limits
md: remove mddev->queue
md: don't initialize queue limits
md/raid10: use the atomic queue limit update APIs
md/raid5: use the atomic queue limit update APIs
md/raid1: use the atomic queue limit update APIs
md/raid0: use the atomic queue limit update APIs
md: add queue limit helpers
md: add a mddev_is_dm helper
md: add a mddev_add_trace_msg helper
md: add a mddev_trace_remap helper
bcache: move calculation of stripe_size and io_opt into bcache_device_init
virtio_blk: Do not use disk_set_max_open/active_zones()
aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts
block: move capacity validation to blkpg_do_ioctl()
block: prevent division by zero in blk_rq_stat_sum()
drbd: atomically update queue limits in drbd_reconsider_queue_parameters
...
|
|
When nvme_identify_ns() fails, it frees the pointer to the struct
nvme_id_ns before it returns. However, ns_update_nuse() calls kfree()
for the pointer even when nvme_identify_ns() fails. This results in
KASAN double-free, which was observed with blktests nvme/045 with
proposed patches [1] on the kernel v6.8-rc7. Fix the double-free by
skipping kfree() when nvme_identify_ns() fails.
Link: https://lore.kernel.org/linux-block/20240304161303.19681-1-dwagner@suse.de/ [1]
Fixes: a1a825ab6a60 ("nvme: add csi, ms and nuse to sysfs")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The namespace does not have attributes, but the head does. Move the new
logging attribute to that structure instead of dereferencing the wrong
type.
And while we're here, fix the reverse-tree coding style.
Fixes: 9f079dda14339e ("nvme: allow passthru cmd error logging")
Reported-by: Tasmiya Nalatwad <tasmiya@linux.vnet.ibm.com>
Tested-by: Tasmiya Nalatwad <tasmiya@linux.vnet.ibm.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Commit d7ac8dca938c ("nvme: quiet user passthrough command errors")
disabled error logging for user passthrough commands. This commit
adds the ability to opt-in to passthrough admin error logging. IO
commands initiated as passthrough will always be logged.
The logging output for passthrough commands (Admin and IO) has been
changed to include CDWXX fields.
nvme0n1: Read(0x2), LBA Out of Range (sct 0x0 / sc 0x80) DNR cdw10=0x0 cdw11=0x1
cdw12=0x70000 cdw13=0x0 cdw14=0x0 cdw15=0x0
Add a helper function nvme_log_err_passthru() which allows us to log
error for passthru commands by decoding cdw10-cdw15 values of nvme
command.
Add a new sysfs attr passthru_err_log_enabled that allows user to conditionally
enable passthrough command logging for either passthrough Admin commands sent to
the controller or passthrough IO commands sent to a namespace.
By default, passthrough error logging is disabled.
To enable passthrough admin error logging:
echo 1 > /sys/class/nvme/nvme0/passthru_err_log_enabled
To disable passthrough admin error logging:
echo 0 > /sys/class/nvme/nvme0/passthru_err_log_enabled
To enable passthrough io error logging:
echo 1 > /sys/class/nvme/nvme0/nvme0n1/passthru_err_log_enabled
To disable passthrough io error logging:
echo 0 > /sys/class/nvme/nvme0/nvme0n1/passthru_err_log_enabled
Signed-off-by: Alan Adamson <alan.adamson@oracle.com>
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The ctrl->state value is updated in another thread using WRITE_ONCE, so
ensure all the readers use the appropriate accessor.
Reviewed-by: Sagi Grimberg <sagi@grmberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
We currently rely on gendisk's file operations (fops) to distinguish
between a namespace head (ns_head) and a regular namespace. To enhance
code readability, introduce a helper function.
Additionally, we must ensure that the device is not an ns_head before
calling nvme_get_ns_from_dev(). To enforce this, add a WARN_ON check
within the nvme_get_ns_from_dev().
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Liu Song <liusong@linux.alibaba.com>
[include fix: https://lore.kernel.org/oe-kbuild-all/202401031943.0N72Tkji-lkp@intel.com/]
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
libnvme is using the sysfs for enumarating the nvme resources. Though
there are few missing attritbutes in the sysfs. For these libnvme issues
commands during discovering.
As the kernel already knows all these attributes and we would like to
avoid libnvme to issue commands all the time, expose these missing
attributes.
The nuse value is updated on request because the nuse is a volatile
value. Since any user can read the sysfs attribute, a very simple rate
limit is added (update once every 5 seconds). A more sophisticated
update strategy can be added later if there is actually a need for it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Drop the 'id' part of the attribute group name because we want to expose
non 'id' related attributes via the ns attribute group.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Having a single Kconfig symbol NVME_AUTH conflates the selection
of the authentication functions from nvme/common and nvme/host,
causing kbuild robot to complain when building the nvme target
only. So introduce a Kconfig symbol NVME_HOST_AUTH for the nvme
host bits and use NVME_AUTH for the common functions only.
And move the CRYPTO selection into nvme/common to make it
easier to read.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310120733.TlPOVeJm-lkp@intel.com/
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Add a fabrics option 'tls' and start the TLS handshake upcall
with the default PSK. When TLS is started the PSK key serial
number is displayed in the sysfs attribute 'tls_key'
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Report the legacy fallback behavior for uuid attributes just once
instead of logging repeated warnings for the same condition every time
the attribute is read. The old behavior is too spamy on the kernel logs.
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reported-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
We had a late fix that modified nvme_sysfs_delete() after the staging
branch for the next merge window relocated the function to a new file.
Port commit 2eb94dd56a4a4 ("nvme: do not let the user delete a ctrl
before a complete") to the latest to avoid a potentially confusing merge
conflict.
Cc: Maurizio Lombardi <mlombard@redhat.com>
Cc: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The core.c file became long and hard to maintain. Create a dedicated
file to centralize the sysfs functionality. This is a common practice to
separate sysfs/configfs related logic from the main driver logic .c file.
For example, in the nvmet module the configfs interface has its own
dedicated file.
This patch does not include any functional changes.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
[merged dhchap memleak fixes, include nvme-auth.h]
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
