summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek/mt76/mac80211.c
AgeCommit message (Collapse)Author
2025-06-24wifi: cfg80211/mac80211: Add support to get radio indexRoopni Devanathan
Currently, per-radio attributes are set on per-phy basis, i.e., all the radios present in a wiphy will take attributes values sent from user. But each radio in a wiphy can get different values from userspace based on its requirement. To extend support to set per-radio attributes, add support to get radio index from userspace. Add an NL attribute - NL80211_ATTR_WIPHY_RADIO_INDEX, to get user specified radio index for which attributes should be changed. Pass this to individual drivers, so that the drivers can use this radio index to change per-radio attributes when necessary. Currently, per-radio attributes identified are: NL80211_ATTR_WIPHY_TX_POWER_LEVEL NL80211_ATTR_WIPHY_ANTENNA_TX NL80211_ATTR_WIPHY_ANTENNA_RX NL80211_ATTR_WIPHY_RETRY_SHORT NL80211_ATTR_WIPHY_RETRY_LONG NL80211_ATTR_WIPHY_FRAG_THRESHOLD NL80211_ATTR_WIPHY_RTS_THRESHOLD NL80211_ATTR_WIPHY_COVERAGE_CLASS NL80211_ATTR_TXQ_LIMIT NL80211_ATTR_TXQ_MEMORY_LIMIT NL80211_ATTR_TXQ_QUANTUM By default, the radio index is set to -1. This means the attribute should be treated as a global configuration. If the user has not specified any index, then the radio index passed to individual drivers would be -1. This would indicate that the attribute applies to all radios in that wiphy. Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250615082312.619639-2-quic_rdevanat@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-05-22wifi: mt76: support power delta calculation for 5 TX pathsShayne Chen
One variant of MT7992 has 5 TX paths, so extend the power delta function to support it. Also, rename nss_delta to path_delta since the value is based on the number of TX paths rather tha the number of spatial streams. (path delta [0.5 dBm] = 10 * log(path number) [dBm] * 2) Co-developed-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250515032952.1653494-9-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-22wifi: mt76: fix available_antennas settingShayne Chen
Check if available_antennas_tx and available_antennas_rx are already set during the per-chip initialization phase; otherwise, they could be overwritten with incorrect values. Fixes: 69d54ce7491d ("wifi: mt76: mt7996: switch to single multi-radio wiphy") Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250515032952.1653494-8-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-03-19wifi: mt76: mt7996: Add mt7996_sta_state routineLorenzo Bianconi
Introduce mt7996_sta_state routine in order to initialize wcid structure in mt7996 codebase. This is a preliminary patch to enable MLO support in MT7996 driver. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250311-mt7996-mlo-v2-6-31df6972519b@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-03-19wifi: mt76: add mt76_get_power_bound helper functionRazvan Grigore
This will replace mt7915_get_power_bound function from b/mt7915/mcu.h, since we will need it also for mt7921 and mt7925 Signed-off-by: Razvan Grigore <razvan.grigore@vampirebyte.ro> Link: https://patch.msgid.link/20250211081247.5892-2-razvan.grigore@vampirebyte.ro Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: add multi-radio remain_on_channel functionsFelix Fietkau
This allows a driver using the generic channel context functions to temporarily switch to another channel for off-channel rx/tx. Link: https://patch.msgid.link/20250102163508.52945-12-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: add multi-radio support to a few core hw opsFelix Fietkau
Iterate over all phys if multi-radio is supported by the driver Link: https://patch.msgid.link/20250102163508.52945-9-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: remove dev->wcid_phy_maskFelix Fietkau
Explicitly check wcid->phy_idx instead. Reduces allocated data size. Link: https://patch.msgid.link/20250102163508.52945-8-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: add chanctx functions for multi-channel phy supportFelix Fietkau
This adds an implementation for the chanctx functions, which can be used by multi-channel capable drivers. Preparation for adding MLO support. Link: https://patch.msgid.link/20250102163508.52945-7-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: initialize more wcid fields mt76_wcid_initFelix Fietkau
Reduces code duplication and ensures that the phy index is always set. Link: https://patch.msgid.link/20250102163508.52945-6-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: add support for allocating a phy without hwFelix Fietkau
Preparation for supporting a single hw with multiple radios Link: https://patch.msgid.link/20250102163508.52945-2-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: add code for emulating hardware scanningFelix Fietkau
Preparation for supporting multiple radios on a single wiphy on devices where firmware does not support actual hardware scanning. This is also a prerequisite for full MLO support Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Co-developed-by: Michael-CY Lee <michael-cy.lee@mediatek.com> Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com> Co-developed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250102163508.52945-1-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: do not add wcid entries to sta poll list during MCU resetFelix Fietkau
Fixes linked list management issues during restart, where sta entries can be recreated and reinitialized while still in the poll list, triggering kernel warnings. Link: https://patch.msgid.link/20241230194202.95065-14-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: only enable tx worker after setting the channelFelix Fietkau
Avoids sending packets too early Fixes: 0b3be9d1d34e ("wifi: mt76: add separate tx scheduling queue for off-channel tx") Link: https://patch.msgid.link/20241230194202.95065-8-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: remove mt76_calculate_default_rate()Felix Fietkau
It is only used in mt76_connac2_mac_tx_rate_val, inline it there. Link: https://patch.msgid.link/20241230194202.95065-1-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-12-04wifi: mac80211: get tx power per linkRameshkumar Sundaram
ML interfaces can have multiple affiliated links to it and hence there is a need to report tx power of specified link rather deflink. Add changes to report tx power of requested link from mac80211, also pass link id as an argument in get_tx_power op so that supported drivers can use it to report link's tx power. Co-developed-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Link: https://patch.msgid.link/20241125083217.216095-3-quic_ramess@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-09-06wifi: mt76: change .sta_assoc callback to .sta_eventFelix Fietkau
Also report auth/disassoc events, in order to give the driver more control over handling the station state. Link: https://patch.msgid.link/20240827093011.18621-11-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: add separate tx scheduling queue for off-channel txFelix Fietkau
Ensure that packets are not sent out to the wrong channel Link: https://patch.msgid.link/20240827093011.18621-6-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: partially move channel change code to coreFelix Fietkau
This allows the core code to change the channel. Code deduplication and preparation for adding scanning code to the core. Link: https://patch.msgid.link/20240828063422.44813-1-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-06wifi: mt76: fix mt76_get_rateFelix Fietkau
Do not assume that the first phy has 2 GHz support. Check sband->band instead of accessing dev->phy.sband_2g. Link: https://patch.msgid.link/20240827093011.18621-4-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-09-05wifi: mt76: mt7915: fix oops on non-dbdc mt7986Bjørn Mork
mt7915_band_config() sets band_idx = 1 on the main phy for mt7986 with MT7975_ONE_ADIE or MT7976_ONE_ADIE. Commit 0335c034e726 ("wifi: mt76: fix race condition related to checking tx queue fill status") introduced a dereference of the phys array indirectly indexed by band_idx via wcid->phy_idx in mt76_wcid_cleanup(). This caused the following Oops on affected mt7986 devices: Unable to handle kernel read from unreadable memory at virtual address 0000000000000024 Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005 CM = 0, WnR = 0 user pgtable: 4k pages, 39-bit VAs, pgdp=0000000042545000 [0000000000000024] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 Internal error: Oops: 0000000096000005 [#1] SMP Modules linked in: ... mt7915e mt76_connac_lib mt76 mac80211 cfg80211 ... CPU: 2 PID: 1631 Comm: hostapd Not tainted 5.15.150 #0 Hardware name: ZyXEL EX5700 (Telenor) (DT) pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mt76_wcid_cleanup+0x84/0x22c [mt76] lr : mt76_wcid_cleanup+0x64/0x22c [mt76] sp : ffffffc00a803700 x29: ffffffc00a803700 x28: ffffff80008f7300 x27: ffffff80003f3c00 x26: ffffff80000a7880 x25: ffffffc008c26e00 x24: 0000000000000001 x23: ffffffc000a68114 x22: 0000000000000000 x21: ffffff8004172cc8 x20: ffffffc00a803748 x19: ffffff8004152020 x18: 0000000000000000 x17: 00000000000017c0 x16: ffffffc008ef5000 x15: 0000000000000be0 x14: ffffff8004172e28 x13: ffffff8004172e28 x12: 0000000000000000 x11: 0000000000000000 x10: ffffff8004172e30 x9 : ffffff8004172e28 x8 : 0000000000000000 x7 : ffffff8004156020 x6 : 0000000000000000 x5 : 0000000000000031 x4 : 0000000000000000 x3 : 0000000000000001 x2 : 0000000000000000 x1 : ffffff80008f7300 x0 : 0000000000000024 Call trace: mt76_wcid_cleanup+0x84/0x22c [mt76] __mt76_sta_remove+0x70/0xbc [mt76] mt76_sta_state+0x8c/0x1a4 [mt76] mt7915_eeprom_get_power_delta+0x11e4/0x23a0 [mt7915e] drv_sta_state+0x144/0x274 [mac80211] sta_info_move_state+0x1cc/0x2a4 [mac80211] sta_set_sinfo+0xaf8/0xc24 [mac80211] sta_info_destroy_addr_bss+0x4c/0x6c [mac80211] ieee80211_color_change_finish+0x1c08/0x1e70 [mac80211] cfg80211_check_station_change+0x1360/0x4710 [cfg80211] genl_family_rcv_msg_doit+0xb4/0x110 genl_rcv_msg+0xd0/0x1bc netlink_rcv_skb+0x58/0x120 genl_rcv+0x34/0x50 netlink_unicast+0x1f0/0x2ec netlink_sendmsg+0x198/0x3d0 ____sys_sendmsg+0x1b0/0x210 ___sys_sendmsg+0x80/0xf0 __sys_sendmsg+0x44/0xa0 __arm64_sys_sendmsg+0x20/0x30 invoke_syscall.constprop.0+0x4c/0xe0 do_el0_svc+0x40/0xd0 el0_svc+0x14/0x4c el0t_64_sync_handler+0x100/0x110 el0t_64_sync+0x15c/0x160 Code: d2800002 910092c0 52800023 f9800011 (885f7c01) ---[ end trace 7e42dd9a39ed2281 ]--- Fix by using mt76_dev_phy() which will map band_idx to the correct phy for all hardware combinations. Fixes: 0335c034e726 ("wifi: mt76: fix race condition related to checking tx queue fill status") Link: https://github.com/openwrt/openwrt/issues/14548 Signed-off-by: Bjørn Mork <bjorn@mork.no> Link: https://patch.msgid.link/20240713130010.516037-1-bjorn@mork.no Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-07-09wifi: mt76: mt7925: report link information in rx statusSean Wang
report link information in rx status Co-developed-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Link: https://patch.msgid.link/c7cdc17d94375a76802a5c4a825ea3e51cdb53af.1720248331.git.sean.wang@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: enable spectrum managementFelix Fietkau
It is supported by all drivers Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: set page_pool napi pointer for mmio devicesLorenzo Bianconi
In order to recycle skbs in the page_pool "hot" cache in napi_pp_put_page routine, set napi pointer for MMIO devices in mt76_create_page_pool(). Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-22wifi: mt76: move wed common utilities in wed.cLorenzo Bianconi
Introduce wed.c in order to collect mt76 wed common codebase used by mt7915 and mt7996 drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-21wifi: mac80211: check beacon countdown is complete on per link basisAditya Kumar Singh
Currently, function to check if beacon countdown is complete uses deflink to fetch the beacon and check the counter. However, with MLO, there is a need to check the counter for the beacon in a particular link. Add support to use link_id in order to fetch the beacon from a particular link data. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240216144621.514385-2-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: mac80211: add support to call csa_finish on a linkAditya Kumar Singh
Currently ieee80211_csa_finish() function finalizes CSA by scheduling a finalizing worker using the deflink. With MLO, there is a need to do it on a given link basis. Pass link ID of the link on which CSA needs to be finalized. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240130140918.1172387-6-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-07wifi: mt76: use chainmask for power delta calculationAllen Ye
The power gain value is related to total TX path, so change the calculation to use per-phy chainmask. Signed-off-by: Allen Ye <allen.ye@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: introduce wed pointer in mt76_queueLorenzo Bianconi
Introduce mtk_wed_device pointer in mt76_queue structure in order to configure WED chip. Get rid of dev parameter in Q_READ and Q_WRITE macros. Introduce wed parameter to the following routine signatures: - mt76_init_queue - mt76_init_tx_queue This is a preliminary patch to introduce WED support for mt7996 since mt7996 runs two separate WED chips. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: move mt76_net_setup_tc in common codeLorenzo Bianconi
This is a preliminary patch to introduce WED support for mt7996 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: add ability to explicitly forbid LED registration with DTRyder Lee
Add ability to explicitly forbid LED registration using DT led\status = "disabled". Tested-by: Alexey D. Filimonov <alexey@filimonic.net> Signed-off-by: Alexey D. Filimonov <alexey@filimonic.net> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-10-23page_pool: remove PP_FLAG_PAGE_FRAGYunsheng Lin
PP_FLAG_PAGE_FRAG is not really needed after pp_frag_count handling is unified and page_pool_alloc_frag() is supported in 32-bit arch with 64-bit DMA, so remove it. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> CC: Lorenzo Bianconi <lorenzo@kernel.org> CC: Alexander Duyck <alexander.duyck@gmail.com> CC: Liang Chen <liangchen.linux@gmail.com> CC: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://lore.kernel.org/r/20231020095952.11055-3-linyunsheng@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-09-30wifi: mt76: mt7921: fix the wrong rate pickup for the chanctx driverSean Wang
The variable band should be determined by the ieee80211_chanctx_conf when the driver is a kind of chanctx one e.g mt7921 and mt7922 driver so we added the extension to mt76_connac2_mac_tx_rate_val by distinguishing if it can support chanctx to fix the incorrect rate pickup. Fixes: 41ac53c899bd ("wifi: mt76: mt7921: introduce chanctx support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: David Ruth <druth@chromium.org> Tested-by: David Ruth <druth@chromium.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: fix race condition related to checking tx queue fill statusFelix Fietkau
When drv_tx calls race against local tx scheduling, the queue fill status checks can potentially race, leading to dma queue entries being overwritten. Fix this by deferring packets from drv_tx calls to the tx worker, in order to ensure that all regular queue tx comes from the same context. Reported-by: Ryder Lee <Ryder.Lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7603: disable A-MSDU tx support on MT7628Felix Fietkau
It was reported that this can cause the PSE hang issues, even with a low number of fragments. Link: https://github.com/openwrt/mt76/issues/793#issuecomment-1676529138 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-08-07page_pool: split types and declarations from page_pool.hYunsheng Lin
Split types and pure function declarations from page_pool.h and add them in page_page/types.h, so that C sources can include page_pool.h and headers should generally only include page_pool/types.h as suggested by jakub. Rename page_pool.h to page_pool/helpers.h to have both in one place. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230804180529.2483231-2-aleksander.lobakin@intel.com [Jakub: change microsoft/mana, fix kdoc paths in Documentation] Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-25wifi: mt76: mt7915: move sta_poll_list and sta_poll_lock in mt76_devLorenzo Bianconi
sta_poll_list and sta_poll_lock are used by most of the drivers, so move them in mt76_dev structure. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-25wifi: mt76: add tx_nss histogram to ethtool statsRyder Lee
mt76_connac2_mac_fill_txs() counts tx_nss but ethtool doesn't show stats. Add missing histogram accordingly. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-25wifi: mt76: enable UNII-4 channel 177 supportRyder Lee
Enable support for the 5GHz channel 177 with center frequency 5885MHz and operating class 125 based on IEEE Std 802.11ax-2021 Table E-4. Signed-off-by: Himanshu Goyal <himanshu.goyal@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: get rid of unused sta_ps callbacksLorenzo Bianconi
sta_ps callback is just an empty stub for most of the drivers, so get rid of them. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: add eht rx rate supportShayne Chen
Add support to report eht rx rate. Note that extended fields for eht in mt76_rx_status will make the struct size exceed the cb size, so make nss and band share the same u8. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: dynamic channel bandwidth changes in AP modeRyder Lee
Allow AP to change channel width for 40Mhz intolerant STA on the 2.4 GHz band. Signed-off-by: Himanshu Goyal <himanshu.goyal@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-03-13wifi: mt76: do not run mt76_unregister_device() on unregistered hwLorenzo Bianconi
Trying to probe a mt7921e pci card without firmware results in a successful probe where ieee80211_register_hw hasn't been called. When removing the driver, ieee802111_unregister_hw is called unconditionally leading to a kernel NULL pointer dereference. Fix the issue running mt76_unregister_device routine just for registered hw. Link: https://bugs.debian.org/1029116 Link: https://bugs.kali.org/view.php?id=8140 Reported-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com> Fixes: 1c71e03afe4b ("mt76: mt7921: move mt7921_init_hw in a dedicated work") Tested-by: Helmut Grohne <helmut@freexian.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/be3457d82f4e44bb71a22b2b5db27b644a37b1e1.1677107277.git.lorenzo@kernel.org
2023-02-03wifi: mt76: add EHT rate stats for ethtoolShayne Chen
Add support to get EHT rate stats from ethtool. This is the preliminary patch to add EHT support for mt7996. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: enable page_pool statsLorenzo Bianconi
Enable page_pool ethtool statistics for mt7915 and mt7921 chipsets. Tested-by: Felix Fietkau <nbd@nbd.name> Tested-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: switch to page_pool allocatorLorenzo Bianconi
In order to reduce possible memory allocation failures due to memory fragmentation caused by page_frag_cache allocator, switch to page_pool allocator for dma and usb mt76 drivers. Remove per rx-queue page_frag_cache Co-developed-by: Felix Fietkau <nbd@nbd.name> Tested-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-09wifi: mt76: mt7915: enable per-phy led supportLorenzo Bianconi
Introduce the capability to support per-phy led blinking. This is needed for devices supporting dbdc. Tested-by: Frank Wunderlich <frank-w@public-files.de> Co-developed-by: Ryder Lee <ryder.Lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.Lee@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-09wifi: mt76: move leds struct in mt76_phyLorenzo Bianconi
Move leds struct in mt76_phy in order to have leds associated to phy (e.g. in dbdc mode) instead of per device. Tested-by: Frank Wunderlich <frank-w@public-files.de> Co-developed-by: Ryder Lee <ryder.Lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.Lee@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-09wifi: mt76: move leds field in leds structLorenzo Bianconi
This is a preliminary patch to support per-phy leds. Tested-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7915: enable WED RX supportLorenzo Bianconi
Enable RX Wireless Ethernet Dispatch available on MT7986 Soc in oreder to offlad traffic received by WLAN NIC and forwarded to LAN/WAN one. Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 19:56:18 +0000