summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/iwl-config.h
AgeCommit message (Collapse)Author
2018-08-05Merge tag 'wireless-drivers-next-for-davem-2018-08-05' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.19 This time a bigger pull request as we have two new Mediatek drivers MT76x2u (CONFIG_MT76x2U) and MT76x0U (CONFIG_MT76x0U). Also iwlwifi got support for the new IEEE 802.11ax standard, the successor for 802.11ac. And naturally smaller new features and bugfixes all over. Major changes: wcn36xx * fix WEP in client mode wil6210 * add support for Talyn-MB (Talyn ver 2.0) device * add support for enhanced DMA firmware feature iwlwifi * implement 802.11ax D2.0 * support for the new 22560 device family * new PCI IDs for 22000 and 22560 qtnfmac * implement cfg80211 power management callback * enable multiple SSIDs scan support * qtnfmac: implement basic WoWLAN support mt7601u * fall back to software encryption for hw unsupported ciphers * enable 802.11 Management Frame Protection (MFP) mt76 * support setting RTS threshold * add USB support * add support for MT76x2u devices * add support for MT76x0U devices mwifiex * allow user space to set all other IEs except WMM IE rsi * add firmware support for AP+BT dual mode ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-26iwlwifi: support multiple tfd queue max sizes for different devicesGolan Ben Ami
22560 devices tfd queue max size is 2^16. Allow a configurable max size in the driver for supporting different devices. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-07-26iwlwifi: introduce device family 22560Golan Ben Ami
Device 22560 have many different hw and sw features than 22000 family, so introduce a new family of devices - 22560. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-07-26iwlwifi: allow different csr flags for different device familiesGolan Ben Ami
Different device families may have different flag values for passing a message to the fw (i.e. SW_RESET). In order to keep the code readable, and avoid conditioning upon the family, store a value for each flag, which indicates the bit that needs to be enabled. Additionally, support 22560 device csr flags and addresses. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-07-26iwlwifi: add support for 22560 devicesLuca Coelho
Add support for the new 22560 family of devices and, while at it, reorganize the 22000 family so it fits better with the new one. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-07-25iwlwifi: add more card IDs for 9000 seriesEmmanuel Grumbach
Add new device IDs for the 9000 series. Cc: stable@vger.kernel.org # 4.14 Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-26iwlwifi: make bitfield a u32 instead of u16Luca Coelho
The bitfield we use in struct iwl_cfg contains 17 bits, but we declare it as u16. The compiler doesn't seem to have any problems with that (it probably automatically makes it u32), but it's cleaner to use a type that is long enough for all the flags. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-26iwlwifi: support new csr addresses for hw addressGolan Ben Ami
In future devices we use different csr addresses for hw addresses. Update csr addresses to support new and legacy devices. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-26iwlwifi: cfg: remove unnecessary cfg data in non-dvm devicesLuca Coelho
The max_data_size and max_inst_size values are only needed for DVM devices. Remove the assignment to those fields in 7000 and newer families so we can also remove the otherwise unnecessary inclusion of iwl-agn.h headers. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-26iwlwifi: allow different csr flags for different device familiesGolan Ben Ami
Different device families may have different flag values for passing a message to the fw (i.e. SW_RESET). In order to keep the code readable, and avoid conditioning upon the family, store a value for each flag, which indicates the bit that needs to be enabled. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-20iwlwifi: mvm: update rs-fw APINaftali Goldstein
Update rs-fw API to match changes in FW. Specifically, the TLC_MNG_NOTIF_REQ_CMD command and TLC_MNG_AMSDU_ENABLE_NOTIF notification are removed, the A-MSDU related info is received from FW via the TLC_MNG_UPDATE_NOTIF, and the TLC_MNG_CONFIG_CMD uses version 2 of its data structure. Additionally, constify some arguments in a couple of functions. Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-20iwlwifi: Revert "iwlwifi: pcie: dynamic Tx command queue size"Sara Sharon
This reverts commit dd05f9aab4426ff178b12d601e50d19d336eba30. Shorter TX queues support was added eventually without the need for the parameters this patch added. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-16iwlwifi: add shared clock PHY config flag for some devicesLuca Coelho
Some devices use a shared clock which is very sensitive to variations and cause trouble in some situations. We need to set a bit in the phy configuration to indicate that to the FW. To make this generic, add a extra_phy_config_flags element to the device configuration and OR it into the phy_cfg before sending it to the firmware. And also create a set of configurations for devices that use shared clocks and need this extra bit to be set. Fixes: c62446d2b028 ("iwlwifi: add new 9460 series PCI IDs") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-02Merge tag 'iwlwifi-next-for-kalle-2017-11-29' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next First batch of iwlwifi updates for v4.16 * Rename the temporary name A000 to 22000; * Change in the way we print the firmware version; * Remove some unused code; * Other small improvements; kvalo: There were conflicts, I fixed them with taking into account commit c2c48ddfc8b0 ("iwlwifi: fix firmware names for 9000 and A000 series hw"): CONFLICT (content): Merge conflict in drivers/net/wireless/intel/iwlwifi/iwl-config.h CONFLICT (modify/delete): drivers/net/wireless/intel/iwlwifi/cfg/a000.c deleted in ca495785063c428641cc6df8888afd2587ca6677 and modified in HEAD. Version HEAD of drivers/net/wireless/intel/iwlwifi/cfg/a000.c left in tree.
2017-11-28iwlwifi: rename the temporary name of A000 to the official 22000Luca Coelho
The family name A000 was just a place-holder when we didn't know what the official name would be yet. Now we know that the family name is 22000, so rename all occurrences accordingly. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-11-16iwlwifi: fix PCI IDs and configuration mapping for 9000 seriesLuca Coelho
A lot of PCI IDs were missing and there were some problems with the configuration and firmware selection for devices on the 9000 series. Fix the firmware selection by adding files for the B-steps; add configuration for some integrated devices; and add a bunch of PCI IDs (mostly for integrated devices) that were missing from the driver's list. Without this patch, a lot of devices will not be recognized or will try to load the wrong firmware file. Cc: stable@vger.kernel.org # 4.13 Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-11-03iwlwifi: remove dead code for internal devices onlyEmmanuel Grumbach
We had a bunch of code that was relevant for internal devices only. Those devices are now being depreceated. Kill all the now unneeded code. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-10-18iwlwifi: define minimum valid address for umac_error_event_table in cfgLuca Coelho
We now have two different minimum valid values for umac_error_event_table. To avoid hardcoding the minimum value in the driver, add a value to cfg where it can be read from. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-10-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers.gitKalle Valo
Mark Brown reported that there are conflicts in iwlwifi between the two trees so fix those now.
2017-10-06iwlwifi: pcie: dynamic Tx command queue sizeShahar S Matityahu
Devices in the A000 family can use a different size for the command queue. To allow this, make the command queue size configurable and set the size for A000 devices to 32. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-10-06iwlwifi: nvm: set the correct offsets to 3168 seriesChaya Rachel Ivgi
The driver currently handles two NVM formats, one for 7000 family and below, and one for 8000 family and above. The 3168 series uses something in between, so currently the driver uses incorrect offsets for it. Fix the incorrect offsets. Fixes: c4836b056d83 ("iwlwifi: Add PCI IDs for the new 3168 series") Signed-off-by: Chaya Rachel Ivgi <chaya.rachel.ivgi@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers.gitKalle Valo
Stephen Rothwell reported quite a few conflicts in iwlwifi between wireless-drivers and wireless-drivers-next. To avoid any problems later in other trees merge w-d to w-d-next to fix those conflicts early.
2017-08-18iwlwifi: distinguish different RF modules in A000 devicesTzipi Peres
Newer versions of A000 devices come with two diffenent RF modules. The PCI_ID, the subsystem ID and the RF ID are identical in these two cases, so we need to differentiate them by using the CSR_HW_RF_ID register- in order to load the appropriate firmware. Signed-off-by: Tzipi Peres <tzipi.peres@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-09iwlwifi: add support of FPGA fwTzipi Peres
Load FW according to NIC type, taking into account simulation, if exists. This is determined by a prph register. Signed-off-by: Tzipi Peres <tzipi.peres@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-01iwlwifi: fix fw_pre_next_step to apply also for C stepHaim Dreyfuss
C step NICs should use the latest FW (currently B step). Correct the condition to make C step NICs advanced its default FW name to the latest one. Also rename _next_ to b_or_c to avoid confusion. Fixes: 5da083d1922c ("iwlwifi: add support for 9000 HW B-step NICs") Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-29iwlwifi: add the new a000_2ax seriesTzipi Peres
Add a new config struct for the new a000 2ax series and add the five PCI ID for it. Signed-off-by: Tzipi Peres <tzipi.peres@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-23iwlwifi: mvm: rs: add logs for the wrong antenna caseGregory Greenman
In case that rate's antenna is wrong at the init stage, it's very hard to say what went wrong. Add debug data to the already existing WARN_ON_ONCE. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-05iwlwifi: add 9000 and A000 device familiesSara Sharon
Add two new device families to differentiate them from 8000. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-05iwlwifi: add dbgc_supported to transport configurationSara Sharon
Use transport configuration to determine DBGC support instead of relying on device family. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-05iwlwifi: remove references to 8000 B-step devicesSara Sharon
We don't have any 8000 B-step right now, and there is no firmware loading code for them anyway. Further more, 9000 B-step devices will hit those code paths. Remove code that was introduced only for 8000 B-step. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-05iwlwifi: cleanup references to 8000 family in NVM codeSara Sharon
NVM code is tightly coupled with 8000 family, while it really refers to extended NVM format introduced back then. Separate it to a configuration dependent boolean, and rename defines accordingly. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-02iwlwifi: Add fw_name_pre_rf_next_step to support different rf stepsHaim Dreyfuss
Integrated chip may have different HW and RF steps. Currently, the driver supports only different HW steps. Add logic to support different RF steps enables combining different HW and RF steps. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-25iwlwifi: move to 512 queuesSara Sharon
Avoid using the old define since it will enlarge necessary structs for previous HW. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-19iwlwifi: support a000 CDB productSara Sharon
Identify and load FW for a000 CDB product. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-19iwlwifi: cleanup unused functionSara Sharon
iwl_has_secure_boot() isn't getting called anywhere. Clean it up. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-11iwlwifi: pcie: introduce split point to a000 devicesSara Sharon
a000 devices are going to have a lot of flows simplified and changed: init flow, RX, TX, and more. This, combined with the fact that code is already very complicated due to backward compatibility - introduce a split that will enable to introduce simplified version of functions. Shared ops are moved to a macro, while functions that will be updated in the next patches are defined twice for now. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-11iwlwifi: add support for 9000 HW B-step NICsLiad Kaufman
Once we remove support for A-step, we'll be able to clean the code back again. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-11iwlwifi: remove support for deprecated RFLuca Coelho
One of the RF modules we support has been deprecated and never released publicly. Remove support for this module. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-02-06iwlwifi: support two phys for a000 devicesSara Sharon
Support differentiating between two phys for a000 devices in order to load the correct firmware. Eventually when moving completely to the new phy we will be able to remove this. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-22iwlwifi: mvm: cleanup redundant no_power_up_nic_in_init configSara Sharon
This is never really used anymore. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-16iwlwifi: add the new 8275 seriesOren Givon
Add a new config struct for the new 8275 series and add the first PCI ID for it. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-16iwlwifi: add the new 9560 seriesOren Givon
Add a new config struct for the new 9560 series and add the 4 new PCI IDs for it. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-08-30iwlwifi: add the new 9170 seriesOren Givon
Add a new config struct for the new 9170 series and add the first PCI ID for it. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-08-30iwlwifi: add the new 9270 seriesOren Givon
Add a new config struct for the new 9270 series and add the first PCI ID for it. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-08-30iwlwifi: add a new series 9460 with new PCI IDOren Givon
Add a new series to the 9000 series called 9460. In addition, add a new PCI ID that is the 9460 new series. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-08-30iwlwifi: rename and reorder 9000 series configuration structsOren Givon
Rename and reorder the 9000 series configuration structs: - struct containing configuration of 5165 was renamed to 9000. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-07-06iwlwifi: pcie: initialize a000 device's TFD tableSara Sharon
For a000 device the FH was replaced by the TFH. This is the first patch in a series introducing the changes stemming from this change. This patch initializes the TFQ queue table with the new 64 bit register and the relevant TFH configuration registers. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-07-06iwlwifi: remove iwl_ht_params.smps_modeJohannes Berg
This struct member is never set, so remove it. Since this is the last thing that needs mac80211.h, also change the includes to no longer use mac80211.h Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-07-06iwlwifi: Add a000 HW family supportHaim Dreyfuss
Add a000 family configuration to iwl-cfg struct Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-07-01iwlwifi: pcie: workaround HW shadow registers bugSara Sharon
Integrated 9000 devices have a bug with shadow registers value retention. If driver writes RBD registers while MAC is asleep the values are stored in shadow registers to be copied whenever MAC wakes up. However, in 9000 devices a MAC wakeup is not triggered and when the bus powers down due to inactivity the shadow values and dirty bits are lost. Turn on the chicken-bits that cause MAC wakeup for RX-related values as well when the device is in D0. When the device is in low power mode turn the RX wakeup chicken bits off since driver is idle and this W/A is not needed. Remove previous W/A which was ineffective. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 14:49:25 +0000