summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath
AgeCommit message (Collapse)Author
7 daystreewide, timers: Rename from_timer() to timer_container_of()Ingo Molnar
Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
11 daysMerge tag 'pci-v6.16-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Print the actual delay time in pci_bridge_wait_for_secondary_bus() instead of assuming it was 1000ms (Wilfred Mallawa) - Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI devices', which broke resume from system sleep on AMD platforms and has been fixed by other commits (Lukas Wunner) Resource management: - Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated and unnecessary (Philipp Stanner) - Remove pcim_iounmap_regions() and pcim_request_region_exclusive() and related flags since all uses have been removed (Philipp Stanner) - Rework devres 'request' functions so they are no longer 'hybrid', i.e., their behavior no longer depends on whether pcim_enable_device or pci_enable_device() was used, and remove related code (Philipp Stanner) - Warn (not BUG()) about failure to assign optional resources (Ilpo Järvinen) Error handling: - Log the DPC Error Source ID only when it's actually valid (when ERR_FATAL or ERR_NONFATAL was received from a downstream device) and decode into bus/device/function (Bjorn Helgaas) - Determine AER log level once and save it so all related messages use the same level (Karolina Stolarek) - Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable Errors (Karolina Stolarek) - Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs controls on interval and burst count, to avoid flooding logs and RCU stall warnings (Jon Pan-Doh) Power management: - Increment PM usage counter when probing reset methods so we don't try to read config space of a powered-off device (Alex Williamson) - Set all devices to D0 during enumeration to ensure ACPI opregion is connected via _REG (Mario Limonciello) Power control: - Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match the filename paths. Retain old deprecated symbols for compatibility, except for the pwrctrl slot driver (PCI_PWRCTRL_SLOT) (Johan Hovold) - When unregistering pwrctrl, cancel outstanding rescan work before cleaning up data structures to avoid use-after-free issues (Brian Norris) Bandwidth control: - Simplify link bandwidth controller by replacing the count of Link Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN flag (Ilpo Järvinen) - Update the Link Speed after retraining, since the Link Speed may have changed (Ilpo Järvinen) PCIe native device hotplug: - Ignore Presence Detect Changed caused by DPC. pciehp already ignores Link Down/Up events caused by DPC, but on slots using in-band presence detect, DPC causes a spurious Presence Detect Changed event (Lukas Wunner) - Ignore Link Down/Up caused by Secondary Bus Reset. On hotplug ports using in-band presence detect, the reset causes a Presence Detect Changed event, which mistakenly caused teardown and re-enumeration of the device. Drivers may need to annotate code that resets their device (Lukas Wunner) Virtualization: - Add an ACS quirk for Loongson Root Ports that don't advertise ACS but don't allow peer-to-peer transactions between Root Ports; the quirk allows each Root Port to be in a separate IOMMU group (Huacai Chen) Endpoint framework: - For fixed-size BARs, retain both the actual size and the possibly larger size allocated to accommodate iATU alignment requirements (Jerome Brunet) - Simplify ctrl/SPAD space allocation and avoid allocating more space than needed (Jerome Brunet) - Correct MSI-X PBA offset calculations for DesignWare and Cadence endpoint controllers (Niklas Cassel) - Align the return value (number of interrupts) encoding for pci_epc_get_msi()/pci_epc_ops::get_msi() and pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel) - Align the nr_irqs parameter encoding for pci_epc_set_msi()/pci_epc_ops::set_msi() and pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel) Common host controller library: - Convert pci-host-common to a library so platforms that don't need native host controller drivers don't need to include these helper functions (Manivannan Sadhasivam) Apple PCIe controller driver: - Extract ECAM bridge creation helper from pci_host_common_probe() to separate driver-specific things like MSI from PCI things (Marc Zyngier) - Dynamically allocate RID-to_SID bitmap to prepare for SoCs with varying capabilities (Marc Zyngier) - Skip ports disabled in DT when setting up ports (Janne Grunau) - Add t6020 compatible string (Alyssa Rosenzweig) - Add T602x PCIe support (Hector Martin) - Directly set/clear INTx mask bits because T602x dropped the accessors that could do this without locking (Marc Zyngier) - Move port PHY registers to their own reg items to accommodate T602x, which moves them around; retain default offsets for existing DTs that lack phy%d entries with the reg offsets (Hector Martin) - Stop polling for core refclk, which doesn't work on T602x and the bootloader has already done anyway (Hector Martin) - Use gpiod_set_value_cansleep() when asserting PERST# in probe because we're allowed to sleep there (Hector Martin) Cadence PCIe controller driver: - Drop a runtime PM 'put' to resolve a runtime atomic count underflow (Hans Zhang) - Make the cadence core buildable as a module (Kishon Vijay Abraham I) - Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by loadable drivers when they are removed (Siddharth Vadapalli) Freescale i.MX6 PCIe controller driver: - Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP (Richard Zhu) - Remove redundant dw_pcie_wait_for_link() from imx_pcie_start_link(); since the DWC core does this, imx6 only needs it when retraining for a faster link speed (Richard Zhu) - Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu) - Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in some cases, the controller can't exit 'L23 Ready' through Beacon or PERST# deassertion (Richard Zhu) - Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum: controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8 GT/s, causing timeouts in L1 (Richard Zhu) - Wait for i.MX95 PLL lock before enabling controller (Richard Zhu) - Save/restore i.MX95 LUT for suspend/resume (Richard Zhu) Mobiveil PCIe controller driver: - Return bool (not int) for link-up check in mobiveil_pab_ops.link_up() and layerscape-gen4, mobiveil (Hans Zhang) NVIDIA Tegra194 PCIe controller driver: - Create debugfs directory for 'aspm_state_cnt' only when CONFIG_PCIEASPM is enabled, since there are no other entries (Hans Zhang) Qualcomm PCIe controller driver: - Add OF support for parsing DT 'eq-presets-<N>gts' property for lane equalization presets (Krishna Chaitanya Chundru) - Read Maximum Link Width from the Link Capabilities register if DT lacks 'num-lanes' property (Krishna Chaitanya Chundru) - Add Physical Layer 64 GT/s Capability ID and register offsets for 8, 32, and 64 GT/s lane equalization registers (Krishna Chaitanya Chundru) - Add generic dwc support for configuring lane equalization presets (Krishna Chaitanya Chundru) - Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar) Renesas R-Car PCIe controller driver: - Describe endpoint BAR 4 as being fixed size (Jerome Brunet) - Document how to obtain R-Car V4H (r8a779g0) controller firmware (Yoshihiro Shimoda) Rockchip PCIe controller driver: - Reorder rockchip_pci_core_rsts because reset_control_bulk_deassert() deasserts in reverse order, to fix a link training regression (Jensen Huang) - Mark RK3399 as being capable of raising INTx interrupts (Niklas Cassel) Rockchip DesignWare PCIe controller driver: - Check only PCIE_LINKUP, not LTSSM status, to determine whether the link is up (Shawn Lin) - Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s for Root Complex and Endpoint modes (Shawn Lin) - Hide the broken ATS Capability in rockchip_pcie_ep_init() instead of rockchip_pcie_ep_pre_init() so it stays hidden after PERST# resets non-sticky registers (Shawn Lin) - Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit() (Diederik de Haas) Synopsys DesignWare PCIe controller driver: - Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training more robust; this will not affect the intended link width if all lanes are functional (Wenbin Yao) - Return bool (not int) for link-up check in dw_pcie_ops.link_up() and armada8k, dra7xx, dw-rockchip, exynos, histb, keembay, keystone, kirin, meson, qcom, qcom-ep, rcar_gen4, spear13xx, tegra194, uniphier, visconti (Hans Zhang) - Add debugfs support for exposing DWC device-specific PTM context (Manivannan Sadhasivam) TI J721E PCIe driver: - Make j721e buildable as a loadable and removable module (Siddharth Vadapalli) - Fix j721e host/endpoint dependencies that result in link failures in some configs (Arnd Bergmann) Device tree bindings: - Add qcom DT binding for 'global' interrupt (PCIe controller and link-specific events) for ipq8074, ipq8074-gen3, ipq6018, sa8775p, sc7280, sc8180x sdm845, sm8150, sm8250, sm8350 (Manivannan Sadhasivam) - Add qcom DT binding for 8 MSI SPI interrupts for msm8998, ipq8074, ipq8074-gen3, ipq6018 (Manivannan Sadhasivam) - Add dw rockchip DT binding for rk3576 and rk3562 (Kever Yang) - Correct indentation and style of examples in brcm,stb-pcie, cdns,cdns-pcie-ep, intel,keembay-pcie-ep, intel,keembay-pcie, microchip,pcie-host, rcar-pci-ep, rcar-pci-host, xilinx-versal-cpm (Krzysztof Kozlowski) - Convert Marvell EBU (dove, kirkwood, armada-370, armada-xp) and armada8k from text to schema DT bindings (Rob Herring) - Remove obsolete .txt DT bindings for content that has been moved to schemas (Rob Herring) - Add qcom DT binding for MHI registers in IPQ5332, IPQ6018, IPQ8074 and IPQ9574 (Varadarajan Narayanan) - Convert v3,v360epc-pci from text to DT schema binding (Rob Herring) - Change microchip,pcie-host DT binding to be 'dma-noncoherent' since PolarFire may be configured that way (Conor Dooley) Miscellaneous: - Drop 'pci' suffix from intel_mid_pci.c filename to match similar files (Andy Shevchenko) - All platforms with PCI have an MMU, so add PCI Kconfig dependency on MMU to simplify build testing and avoid inadvertent build regressions (Arnd Bergmann) - Update Krzysztof Wilczyński's email address in MAINTAINERS (Krzysztof Wilczyński) - Update Manivannan Sadhasivam's email address in MAINTAINERS (Manivannan Sadhasivam)" * tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (147 commits) MAINTAINERS: Update Manivannan Sadhasivam email address PCI: j721e: Fix host/endpoint dependencies PCI: j721e: Add support to build as a loadable module PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup PCI: cadence: Add support to build pcie-cadence library as a kernel module MAINTAINERS: Update Krzysztof Wilczyński email address PCI: Remove unnecessary linesplit in __pci_setup_bridge() PCI: WARN (not BUG()) when we fail to assign optional resources PCI: Remove unused pci_printk() PCI: qcom: Replace PERST# sleep time with proper macro PCI: dw-rockchip: Replace PERST# sleep time with proper macro PCI: host-common: Convert to library for host controller drivers PCI/ERR: Remove misleading TODO regarding kernel panic PCI: cadence: Remove duplicate message code definitions PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding PCI: cadence-ep: Correct PBA offset in .set_msix() callback ...
2025-05-23wifi: ath12k: switch to PCI_PWRCTRL_PWRSEQJohan Hovold
The PCI_PWRCTRL_PWRSEQ and HAVE_PWRCTRL symbols have been renamed to reflect the pwrctrl framework name. Switch to the non-deprecated symbols. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jeff Johnson <jjohnson@kernel.org> # drivers/net/wireless/ath/... Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://patch.msgid.link/20250402132634.18065-4-johan+linaro@kernel.org
2025-05-23wifi: ath11k: switch to PCI_PWRCTRL_PWRSEQJohan Hovold
The PCI_PWRCTRL_PWRSEQ and HAVE_PWRCTRL symbols have been renamed to reflect the pwrctrl framework name. Switch to the non-deprecated symbols. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jeff Johnson <jjohnson@kernel.org> # drivers/net/wireless/ath/... Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://patch.msgid.link/20250402132634.18065-3-johan+linaro@kernel.org
2025-05-22Merge tag 'ath-next-20250521' of ↵Johannes Berg
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath Jeff Johnson says: ================== ath.git patches for v6.16 ath12k: Add monitor mode support for WCN7850. Enhance regulatory support including 6 GHz power modes. In addition, perform the usual set of bug fixes and cleanups across all supported drivers. ================== Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-05-21wifi: ath12k: fix regdomain update failure when connection establishesBaochen Qiang
Commit 7ed3e88664e3 ("wifi: ath12k: update regulatory rules when connection established") introduced a call to ath12k_reg_handle_chan_list() upon connection to update the regulatory domain in cfg80211 based on the power type received from the AP. However, this update fails because ah->regd_updated was already set to true during the earlier regulatory update triggered when the interface was added. To resolve this, reset ah->regd_updated before calling ath12k_reg_handle_chan_list() to ensure the update proceeds correctly. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1 Fixes: 7ed3e88664e3 ("wifi: ath12k: update regulatory rules when connection established") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250521-ath12k-fix-ah-regd_updated-v1-3-9737de5bf98e@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-21wifi: ath12k: fix regdomain update failure when adding interfaceBaochen Qiang
Commit 4c546023d71a ("wifi: ath12k: update regulatory rules when interface added"), introduced a call to ath12k_reg_handle_chan_list() during interface addition to update the regulatory domain based on the interface type. While this works initially, subsequent updates (e.g., after an interface delete/re-add cycle) fail because ah->regd_updated is never reset. To address this, reset ah->regd_updated before calling ath12k_reg_handle_chan_list() to allow the update to proceed. However, this change exposes another issue: a timeout occurs when waiting for the 11D scan to complete, as seen in the log: ath12k_pci 0000:05:00.0: failed to receive 11d scan complete: timed out This happens because during interface down, ar->state_11d is set to ATH12K_11D_PREPARING, and during interface up, the host waits for ar->completed_11d_scan even though the scan hasn't started yet. Fix this by updating the wait condition to check for ATH12K_11D_RUNNING, which is the only state where a scan complete event is expected. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1 Fixes: 4c546023d71a ("wifi: ath12k: update regulatory rules when interface added") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250521-ath12k-fix-ah-regd_updated-v1-2-9737de5bf98e@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-21wifi: ath12k: fix regdomain update failure after 11D scan completesBaochen Qiang
In the current implementation of ath12k_regd_update(), the ah->regd_updated flag is used to ensure that the regulatory domain is updated only once per radio. During MAC registration, this function is called to push the default regulatory domain to cfg80211. At that point, the hardware state is not on and hence ah->regd_updated remains false. However, after commit 4c546023d71a ("wifi: ath12k: update regulatory rules when interface added"), ath12k_reg_handle_chan_list() is invoked when an interface is added, which in turn calls ath12k_regd_update(). By this time, hardware state is on and consecutively ah->regd_updated becomes true. Later, when the 11D scan completes and a new regulatory domain is received from the firmware, the host attempts to update cfg80211 again via ath12k_regd_update(). But since ah->regd_updated is already true, the update is skipped. >From the user's perspective, this results in a failure to connect to 6 GHz APs, as the default regulatory domain (the only one pushed to cfg80211) does not include 6 GHz support. To resolve this, reset the ah->regd_updated flag when handling the 11D regulatory domain update. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1 Fixes: 591de41d7008 ("wifi: ath12k: add 11d scan offload support") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250521-ath12k-fix-ah-regd_updated-v1-1-9737de5bf98e@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-21wifi: check if socket flags are validBert Karwatzki
Checking the SOCK_WIFI_STATUS flag bit in sk_flags may give wrong results since sk_flags are part of a union and the union is used otherwise. Add sk_requests_wifi_status() which checks if sk is non-NULL, sk is a full socket (so flags are valid) and checks the flag bit. Fixes: 76a853f86c97 ("wifi: free SKBTX_WIFI_STATUS skb tx_flags flag") Suggested-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Bert Karwatzki <spasswolf@web.de> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Link: https://patch.msgid.link/20250520223430.6875-1-spasswolf@web.de [edit commit message, fix indentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-05-20wifi: ath12k: fix mac pdev frequency range updateAditya Kumar Singh
The current implementation of per-pdev frequency range updates assumes that each pdev supports only a single band. As a result in ath12k_regd_update(), bands are handled using an if-else structure, which limits updates to only one of the band per pdev. This assumption does not hold for all chipsets. For example, the WCN7850 supports multiple bands within a single pdev. Hence to accommodate such cases, update the logic to account for all band cases by handling each band in a separate if conditions instead of the previous if-else structure. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Fixes: 13324cecbb2c ("wifi: ath12k: Update frequency range if reg rules changes") Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250520-fix_freq_range_update-v1-1-e061fd147b87@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-20wifi: carl9170: micro-optimize carl9170_tx_shift_bm()Yury Norov
The function calls bitmap_empty() just before find_first_bit(). Both functions are O(N). Because find_first_bit() returns >= nbits in case of empty bitmap, the bitmap_empty() test may be avoided. Signed-off-by: Yury Norov <yury.norov@gmail.com> Acked-by: Christian Lamparter <chunkeey@gmail.com> Link: https://patch.msgid.link/20250326155200.39895-1-yury.norov@gmail.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-20wifi: ath9k_htc: Abort software beacon handling if disabledToke Høiland-Jørgensen
A malicious USB device can send a WMI_SWBA_EVENTID event from an ath9k_htc-managed device before beaconing has been enabled. This causes a device-by-zero error in the driver, leading to either a crash or an out of bounds read. Prevent this by aborting the handling in ath9k_htc_swba() if beacons are not enabled. Reported-by: Robert Morris <rtm@csail.mit.edu> Closes: https://lore.kernel.org/r/88967.1743099372@localhost Fixes: 832f6a18fc2a ("ath9k_htc: Add beacon slots") Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://patch.msgid.link/20250402112217.58533-1-toke@toke.dk Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-20wifi: ath12k: remove redundant regulatory rules intersection logic in hostAishwarya R
Whenever there is a change in the country code settings from the user, driver does an intersection of the regulatory rules for this new country with the original regulatory rules which were reported during initialization time. There is also similar logic running in firmware with a difference that the intersection in firmware is only done when the country code is configuration during boot up time (BDF/OTP). Firmware logic does not kick in when no country code is configured during device bring up time as the device is always expected to have the country code configured properly in the deployment. There is a debug/test use case that requires absolute regulatory rules to be used for a user configured country code when the device is not configured with a particular country code during boot up time. To support the above test use case, remove the redundant regulatory rules intersection logic in the host driver. Depend on the intersection logic in firmware when the device comes up with pre-configured country code. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00209-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aishwarya R <quic_aisr@quicinc.com> Signed-off-by: Rajat Soni <quic_rajson@quicinc.com> Link: https://patch.msgid.link/20250505034351.1365914-1-quic_rajson@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-20wifi: ath12k: Send MCS15 support to firmware during peer assocMohan Kumar G
As per IEEE 802.11be-2024 - 9.4.2.321, EHT operation element contains MCS15 Disable subfield as the sixth bit, which is set when MCS15 support is not enabled. During association, firmware will use this MCS15 flag to enable or disable the reception of PPDU with EHT-MCS15 capability. Send MCS15 support to firmware through WMI command during peer assoc. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Co-developed-by: Dhanavandhana Kannan <quic_dhanavan1@quicinc.com> Signed-off-by: Dhanavandhana Kannan <quic_dhanavan1@quicinc.com> Signed-off-by: Mohan Kumar G <quic_mkumarg@quicinc.com> Link: https://patch.msgid.link/20250505153536.3275145-1-quic_mkumarg@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-19wifi: ath12k: Fix scan initiation failure handlingVignesh C
During a code review, it is observed that in the scenario where scan initiation fails, the current code schedules the ar->scan.timeout workqueue which is not necessary. In the scan initiation failure scenario, exit the code instead of scheduling the ar->scan.timeout workqueue. Compile tested only. Signed-off-by: Vignesh C <quic_vignc@quicinc.com> Link: https://patch.msgid.link/20250512065849.2833232-1-quic_vignc@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-19wifi: ath12k: fix memory leak in WMI firmware statsP Praneesh
Memory allocated for firmware pdev, vdev and beacon statistics are not released during rmmod. Below kmemleak trace is seen for this memory leak: unreferenced object 0xffff8e76aebdfa00 (size 256): comm "softirq", pid 0, jiffies 4299272453 hex dump (first 32 bytes): 28 19 71 c3 76 8e ff ff 28 19 71 c3 76 8e ff ff (.q.v...(.q.v... 9f ff ff ff f4 d4 03 00 aa 88 09 00 bd 40 23 00 .............@#. backtrace (crc dfe1b440): __kmalloc_cache_noprof+0x2b0/0x370 ath12k_wmi_tlv_fw_stats_data_parse.isra.0+0x44e/0x730 [ath12k] ath12k_wmi_tlv_iter+0x5e/0x140 [ath12k] ath12k_update_stats_event+0x85/0x300 [ath12k] ath12k_wmi_op_rx+0x624/0xd70 [ath12k] ath12k_htc_rx_completion_handler+0x1f4/0x330 [ath12k] ath12k_ce_recv_process_cb+0x218/0x300 [ath12k] ath12k_pci_ce_workqueue+0x1b/0x30 [ath12k] process_one_work+0x219/0x680 bh_worker+0x198/0x1f0 tasklet_action+0x13/0x30 handle_softirqs+0xca/0x460 __irq_exit_rcu+0xbe/0x110 irq_exit_rcu+0x9/0x30 common_interrupt+0xa7/0xc0 asm_common_interrupt+0x26/0x40 Fix this by calling ath12k_fw_stats_reset() before hardware unregister. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Fixes: b8a0d83fe4c7 ("wifi: ath12k: move firmware stats out of debugfs") Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Link: https://patch.msgid.link/20250507-fw-stats-mem-leak-v1-1-8d4d1d8ec0e8@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-19wifi: ath12k: fix ring-buffer corruptionJohan Hovold
Users of the Lenovo ThinkPad X13s have reported that Wi-Fi sometimes breaks and the log fills up with errors like: ath11k_pci 0006:01:00.0: HTC Rx: insufficient length, got 1484, expected 1492 ath11k_pci 0006:01:00.0: HTC Rx: insufficient length, got 1460, expected 1484 which based on a quick look at the ath11k driver seemed to indicate some kind of ring-buffer corruption. Miaoqing Pan tracked it down to the host seeing the updated destination ring head pointer before the updated descriptor, and the error handling for that in turn leaves the ring buffer in an inconsistent state. While this has not yet been observed with ath12k, the ring-buffer implementation is very similar to the ath11k one and it suffers from the same bugs. Add the missing memory barrier to make sure that the descriptor is read after the head pointer to address the root cause of the corruption while fixing up the error handling in case there are ever any (ordering) bugs on the device side. Note that the READ_ONCE() are only needed to avoid compiler mischief in case the ring-buffer helpers are ever inlined. Tested-on: WCN7850 hw2.0 WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Cc: stable@vger.kernel.org # 6.3 Link: https://bugzilla.kernel.org/show_bug.cgi?id=218623 Link: https://lore.kernel.org/20250310010217.3845141-3-quic_miaoqing@quicinc.com Cc: Miaoqing Pan <quic_miaoqing@quicinc.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Miaoqing Pan <quic_miaoqing@quicinc.com> Link: https://patch.msgid.link/20250321095219.19369-1-johan+linaro@kernel.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-19wifi: ath12k: fix memory leak in ath12k_service_ready_ext_eventRajat Soni
Currently, in ath12k_service_ready_ext_event(), svc_rdy_ext.mac_phy_caps is not freed in the failure case, causing a memory leak. The following trace is observed in kmemleak: unreferenced object 0xffff8b3eb5789c00 (size 1024): comm "softirq", pid 0, jiffies 4294942577 hex dump (first 32 bytes): 00 00 00 00 01 00 00 00 00 00 00 00 7b 00 00 10 ............{... 01 00 00 00 00 00 00 00 01 00 00 00 1f 38 00 00 .............8.. backtrace (crc 44e1c357): __kmalloc_noprof+0x30b/0x410 ath12k_wmi_mac_phy_caps_parse+0x84/0x100 [ath12k] ath12k_wmi_tlv_iter+0x5e/0x140 [ath12k] ath12k_wmi_svc_rdy_ext_parse+0x308/0x4c0 [ath12k] ath12k_wmi_tlv_iter+0x5e/0x140 [ath12k] ath12k_service_ready_ext_event.isra.0+0x44/0xd0 [ath12k] ath12k_wmi_op_rx+0x2eb/0xd70 [ath12k] ath12k_htc_rx_completion_handler+0x1f4/0x330 [ath12k] ath12k_ce_recv_process_cb+0x218/0x300 [ath12k] ath12k_pci_ce_workqueue+0x1b/0x30 [ath12k] process_one_work+0x219/0x680 bh_worker+0x198/0x1f0 tasklet_action+0x13/0x30 handle_softirqs+0xca/0x460 __irq_exit_rcu+0xbe/0x110 irq_exit_rcu+0x9/0x30 Free svc_rdy_ext.mac_phy_caps in the error case to fix this memory leak. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Rajat Soni <quic_rajson@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Link: https://patch.msgid.link/20250430-wmi-mem-leak-v1-1-fcc9b49c2ddc@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-19wifi: ath12k: support usercase-specific firmware overridesMiaoqing Pan
Introduce 'firmware-name' property to allow end-users and/or integrators to decide which usecase-specific firmware to run on the WCN7850 platform. This is necessary due to resource limitations such as memory capacity and CPU capability, or performance and power optimization for different application scenarios. Currently, there are two firmwares, both files can be executed interchangeably. For example: - ath12k/WCN7850/hw2.0/amss.bin, ath12k/WCN7850/hw2.0/m3.bin ath12k/WCN7850/hw2.0/board-2.bin - ath12k/WCN7850/hw2.0/ncm825/amss.bin, ath12k/WCN7850/hw2.0/ncm825/m3.bin ath12k/WCN7850/hw2.0/board-2.bin The former is the default firmware, suitable for most WiFi 7 STA functions. The latter adds support for commercial-quality SAP and optimizes power consumption for IoT applications. And both use the same BDF/regdb data within the main board-2.bin. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Miaoqing Pan <quic_miaoqing@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250424005703.2479907-3-quic_miaoqing@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-19wifi: ath12k: Adjust the process of resource release for ahb busYingying Tang
Due to the change in the resource release order in ath12k_core_deinit(), the resource release order in the AHB bus removal process needs to be adjusted accordingly. Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1 Fixes: 6cee30f0da75 ("wifi: ath12k: add AHB driver support for IPQ5332") Signed-off-by: Yingying Tang <quic_yintang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250423055650.16230-3-quic_yintang@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-19wifi: ath12k: Reorder and relocate the release of resources in ↵Yingying Tang
ath12k_core_deinit() Ath12k panic notifier is registered in driver loading process. But it is not unregistered if ATH12K_FLAG_QMI_FAIL is set(e.g. load BDF failed) and unload driver. It causes a dirty node in panic notifier list since ath12k panic notifier is not unregistered from list but the buffer of this node is freed in driver unloading process. If load driver again there will be a page fault error due to this dirty node in panic notifier list. This issue is caused by asymmetry between ath12k_core_init() and ath12k_core_deinit(). Reorder and relocate the release of resources in ath12k_core_deinit() to avoid this asymmetry issue. Call Trace: <TASK> ? show_regs+0x67/0x70 ? __die_body+0x20/0x70 ? __die+0x2b/0x40 ? page_fault_oops+0x15d/0x500 ? search_bpf_extables+0x63/0x90 ? notifier_chain_register+0x21/0xe0 ? search_exception_tables+0x5f/0x70 ? kernelmode_fixup_or_oops.isra.0+0x61/0x80 ? __bad_area_nosemaphore+0x179/0x240 ? bad_area_nosemaphore+0x16/0x20 ? do_user_addr_fault+0x312/0x7f0 ? prb_read_valid+0x1c/0x30 ? exc_page_fault+0x78/0x180 ? asm_exc_page_fault+0x27/0x30 ? notifier_chain_register+0x21/0xe0 ? notifier_chain_register+0x55/0xe0 atomic_notifier_chain_register+0x2c/0x50 ath12k_core_init+0x7e/0x110 [ath12k] ath12k_pci_probe+0xaba/0xba0 [ath12k] Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0-02903-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: 809055628bce8 ("wifi: ath12k: add panic handler") Signed-off-by: Yingying Tang <quic_yintang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250423055650.16230-2-quic_yintang@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-19wifi: ath12k: print device dp stats in debugfsVinith Kumar R
Print the data path related device specific stats in debugfs. These device_dp_stats are exposed in the ath12k debugfs directory. Output of device_dp_stats: root@CDCWLEX0799743-LIN:/home/qctest# cat /sys/kernel/debug/ath12k/pci-0000\:58\:00.0/device_dp_stats DEVICE RX STATS: err ring pkts: 0 Invalid RBM: 0 RXDMA errors: Overflow: 0 MPDU len: 0 FCS: 0 Decrypt: 0 TKIP MIC: 0 Unencrypt: 0 MSDU len: 0 MSDU limit: 0 WiFi parse: 0 AMSDU parse: 0 SA timeout: 0 DA timeout: 0 Flow timeout: 0 Flush req: 0 AMSDU frag: 0 Multicast echo: 0 AMSDU mismatch: 0 Unauth WDS: 0 AMSDU or WDS: 0 REO errors: Desc addr zero: 0 Desc inval: 0 AMPDU in non BA: 0 Non BA dup: 0 BA dup: 0 Frame 2k jump: 0 BAR 2k jump: 0 Frame OOR: 155 BAR OOR: 0 No BA session: 0 Frame SN equal SSN: 0 PN check fail: 0 2k err: 0 PN err: 0 Desc blocked: 0 HAL REO errors: ring0: 0 ring1: 0 ring2: 0 ring3: 0 ring4: 0 ring5: 0 ring6: 0 ring7: 0 DEVICE TX STATS: TCL Ring Full Failures: ring0: 0 ring1: 0 ring2: 0 ring3: 0 Misc Transmit Failures: 0 tx_wbm_rel_source: 0:986 1:0 2:0 3:57 4:0 tqm_rel_reason: 0:1043 1:0 2:0 3:0 4:0 5:0 6:0 7:0 8:0 9:0 10:0 11:0 12:0 13:0 14:0 fw_tx_status: 0:57 1:0 2:0 3:0 4:0 5:0 6:0 tx_enqueued: 0:329 1:145 2:464 3:105 tx_completed: 0:329 1:145 2:464 3:105 radio0 tx_pending: 0 REO Rx Received: Ring1: 0:201 1:0 2:0 Ring2: 0:0 1:0 2:0 Ring3: 0:6152 1:0 2:0 Ring4: 0:9 1:0 2:0 Ring5: 0:0 1:0 2:0 Ring6: 0:0 1:0 2:0 Ring7: 0:0 1:0 2:0 Ring8: 0:0 1:0 2:0 Rx WBM REL SRC Errors: TQM: 0:0 1:0 2:0 Rxdma: 0:0 1:0 2:0 Reo: 0:155 1:0 2:0 FW: 0:0 1:0 2:0 SW: 0:0 1:0 2:0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Vinith Kumar R <quic_vinithku@quicinc.com> Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com> Reviewed-by: Mahendran P <quic_mahep@quicinc.com> Link: https://patch.msgid.link/20250425012802.698914-4-nithyanantham.paramasivam@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-19wifi: ath12k: Add device dp stats supportVinith Kumar R
Add support for data path related device specific stats. This information helps to debug connectivity and performance issues in AP, STA, and Mesh modes. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Vinith Kumar R <quic_vinithku@quicinc.com> Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com> Reviewed-by: Mahendran P <quic_mahep@quicinc.com> Link: https://patch.msgid.link/20250425012802.698914-3-nithyanantham.paramasivam@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-19wifi: ath12k: change soc name to device nameVinith Kumar R
To have consistent nomenclature, replace the use of the term "soc" with the term "device". Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Vinith Kumar R <quic_vinithku@quicinc.com> Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com> Reviewed-by: Mahendran P <quic_mahep@quicinc.com> Link: https://patch.msgid.link/20250425012802.698914-2-nithyanantham.paramasivam@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-19wifi: ath12k: Fix invalid RSSI values in station dumpP Praneesh
When processing a "station dump" command, the driver retrieves RSSI values from the HAL_PHYRX_RSSI_LEGACY TLV received from the monitor destination ring, and reports them to userspace. Currently, the RSSI values reported are improper because the hardware has not been configured to update them properly. To fix this, enable the HTT_RX_FILTER_TLV_FLAGS_PPDU_START_USER_INFO in the filter setup to ensure the correct RSSI values are returned in the HAL_PHYRX_RSSI_LEGACY TLV, resulting in correct RSSI values being reported to userspace. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00218-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com> Signed-off-by: Sowjanya vardhineni <quic_svardhin@quicinc.com> Reviewed-by: Mahendran P <quic_mahep@quicinc.com> Link: https://patch.msgid.link/20250424055104.2503723-1-quic_svardhin@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: pass link_conf for tx_arvif retrievalAloka Dixit
Three out of four callers to ath12k_mac_get_tx_arvif() have link_conf pointer already set for other operations. Pass it as a parameter. Modify ath12k_control_beaconing() to set link_conf first. Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250408184501.3715887-4-aloka.dixit@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: update EMLSR capabilities of ML StationRamasamy Kaliappan
When EMLSR operation is enabled for an ML Station, EMLSR transition timeout, padding delay and transition delay should be updated to Firmware. Above parameters will be used by Firmware to do EMLSR operation such as sending EML operation mode notification frame, initial control frame etc. Obtain above parameters from EML capabilities information present in ieee80211_sta object and update the same to Firmware in peer assoc WMI command sent for ML station. MLO is not enabled in WCN7850 and hence this change is not applicable to it as of now. This can be a leverage once it is enabled in future. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Ramasamy Kaliappan <quic_rkaliapp@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250327051320.3253783-5-quic_ramess@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: Prevent multicast duplication for dynamic VLANMuna Sinada
Since dynamic VLAN traffic is software encrypted and encapsulated, mac80211 handles the duplication on each link for MLO dynamic VLAN multicast. Currently in ath12k_mac_op_tx(), all multicast frames are duplicated and are assigned a mcbc_gsn. This is causing dynamic VLAN multicast traffic to be dropped in hardware. Prevent dynamic VLAN multicast traffic from being duplicated again in the driver. Check if incoming packet is a dynamic VLAN packet and avoid defaulting to multicast conditional. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250424221404.1262597-1-muna.sinada@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: Enable AST index based address search in Station ModeThiraviyam Mariyappan
Currently, TCL performs the TX address search for each entry during transmission, which may lead to packet delays. To mitigate this issue, enable AST index-based address search during transmission in station mode. This AST index-based search is not enabled in AP mode due to the complexity involved in fetching peer information. Implement changes to retrieve the offset of ast_idx/ast_hash values from the PEER_MAP3 event, update the vdev search type to ADDRX, and enable AST lookup in the bank configuration. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Thiraviyam Mariyappan <quic_tmariyap@quicinc.com> Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com> Reviewed-by: Mahendran P <quic_mahep@quicinc.com> Link: https://patch.msgid.link/20250422094255.131226-1-nithyanantham.paramasivam@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: enable monitor mode for WCN7850Kang Yang
Enable monitor mode for WCN7850. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250421023444.1778-14-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: use different packet offset for WCN7850Kang Yang
In ath12k_dp_mon_rx_merg_msdus(), will set packet offset to 8. This is a right value for QCN9274. But WCN7850 use different hardware rings for monitor mode because it doesn't have RX MON component. So the packet offset is different. With current offset, upper-layer application will failed to parse the payload correctly. Should use different value for those who don't have RX MON component. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250421023444.1778-13-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: init monitor parameters for WCN7850Kang Yang
Some monitor parameters are only initialized for QCN9274, but WCN7850 also needs them, so initialize them for WCN7850 as well. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250421023444.1778-12-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: add support to reap and process mon dest ringKang Yang
WCN7850 uses error dst ring as mon dest ring. Each time hardware receives a packet, will fill the payload into mon dest ring. The mon dest ring may store many MSDUs, which belonged to different MPDUs. Need to retrieve MSDUs based on the PPDU ID, only processing the MSDUs with same PPDU ID each time. The PPDU ID is used in cycles, the difference between the PPDU IDs of the two rings must be checked. If the status PPDU ID minus the dest PPDU ID is greater than 20000, it is considered a wrap-around case. After reaping the mon dest ring, should prepare packet and deliver it to mac80211 when status PPDU ID is equal to dest PPDU ID. Then start to process next PPDU if exists. But if dest PPDU ID > status PPDU ID, should hold on to mon dest ring processing. If it exceeds 16 consecutive times, status PPDU ID will be forcibly set to dest PPDU ID to avoid backpressure issue. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250421023444.1778-11-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: use ath12k_buffer_addr in ath12k_dp_rx_link_desc_return()Kang Yang
Currently, ath12k_dp_rx_link_desc_return() takes struct hal_reo_dest_ring as its second input. This struct is converted to struct hal_wbm_release_ring and passed into ath12k_hal_rx_msdu_link_desc_set(), where it is converted again. This double conversion is both strange and inefficient. In ath12k_hal_rx_msdu_link_desc_set(), only buf_addr_info is actually used. To simplify the code and improve readability, directly passes buf_addr_info when calling ath12k_dp_rx_link_desc_return(). Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250421023444.1778-10-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: fix macro definition HAL_RX_MSDU_PKT_LENGTH_GETKang Yang
Currently, HAL_RX_MSDU_PKT_LENGTH_GET uses u32_get_bits to obtain the MSDU length from the MSDU description. This is not right. Because all halphy descriptions are little endian. So use le32_get_bits for HAL_RX_MSDU_PKT_LENGTH_GET. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250421023444.1778-9-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: add support to reap and process monitor status ringKang Yang
WCN7850 uses monitor status ring to store status buffer. Status buffer contains many TLVs such as MPDU START/END. From these TLVs, can get necessary information about related payload, such as PPDU ID. Add helper function to reap status buffer from monitor status ring so that can parse TLVs later by ath12k_dp_mon_parse_rx_dest(). Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250421023444.1778-8-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: add monitor mode handler by monitor status ring interruptKang Yang
Monitor status ring interrupt is configured in previous patch. So add handler function __ath12k_dp_mon_process_ring() for monitor mode. Will implement detail processing in patch 7 and 10. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250421023444.1778-7-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: add interrupt configuration for mon status ringKang Yang
The monitor mode design is: 1. Hardware captures packets on the air. 2. Hardware stores the packets into related rings. 3. When the ring buffer reaches the interrupt threshold, it triggers the interrupt. 4. Reap and process the ring buffer in ath12k_dp_service_srng(). Here the interrupt thresholds are intr_timer_thres_us, low_threshold and intr_batch_cntr_thres_entries. An interrupt will be triggered once: 1. Number of packets in the ring reaches intr_batch_cntr_thres_entries. 2. Number of packets in the ring reaches low_threshold(by timer). 3. Timer reaches intr_timer_thres_us. So, add interrupt configuration for the mon status ring, then start to process ring buffers when the interrupt arrives. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250421023444.1778-6-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: add ring config for monitor mode on WCN7850Kang Yang
For WCN7850, it doesn't have an RX MON component(RX MON dest ring and RX MON buffer ring). So it can only reuse the mon status ring, RX refill ring, and error dst ring for monitor mode. Every time the hardware captures a packet, it will store status information into the status ring and store the MSDU payload buffer address into the error dst ring. When host reaps the MSDU payload and consumes a buffer, it will replenish the RX refill ring to indicate a new buffer. The configuration of the error dst/RX ring already exists. But there is no configuration for mon status ring. So add ring configuration for it. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250421023444.1778-5-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: add srng config template for mon status ringKang Yang
Currently, the hw_srng_config_template does not have a template for mon status ring. But srng config template is necessary during ring initialization. So add a template for mon status ring. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250421023444.1778-4-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: avoid call ath12k_dp_mon_parse_rx_dest_tlv() for WCN7850Kang Yang
WCN7850 doesn't have RX MON component. So it's monitor mode design is quite different from AP based chips like QCN9274, which have RX MON component. ath12k_dp_mon_parse_rx_dest_tlv() is such a specific function for AP based chips. So don't call this function for WCN7850. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250421023444.1778-3-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: parse msdu_end tlv in ath12k_dp_mon_rx_parse_status_tlv()Kang Yang
Currently, error bitmap and decap format are parsed in ath12k_dp_mon_parse_rx_dest_tlv(). Then stored into dp_rx_mon_mpdu_list. ath12k_dp_mon_parse_rx_dest_tlv() and dp_rx_mon_mpdu_list are only used by QCN9274. For WCN7850, error bitmap and decap format are also needed. So need to parse MSDU END TLV in ath12k_dp_mon_rx_parse_status_tlv(), this is the common function for WCN7850 and QCN9274. Then store error bitmap and decap format so that QCN9274 can fetch them when processing MSDU payload. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250421023444.1778-2-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: Abort scan before removing link interface to prevent duplicate ↵Lingbo Kong
deletion Currently, when ath12k performs the remove link interface operation, if there is an ongoing scan operation on the arvif, ath12k may execute the remove link interface operation multiple times on the same arvif. This occurs because, during the remove link operation, if a scan operation is present on the arvif, ath12k may receive a WMI_SCAN_EVENT_COMPLETED event from the firmware. Upon receiving this event, ath12k will continue to execute the ath12k_scan_vdev_clean_work() function, performing the remove link interface operation on the same arvif again. To address this issue, before executing the remove link interface operation, ath12k needs to check if there is an ongoing scan operation on the current arvif. If such an operation exists, it should be aborted. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> Tested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250418064008.7172-1-quic_lingbok@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: use WMI_VDEV_SET_TPC_POWER_CMDID when EXT_TPC_REG_SUPPORT for ↵Baochen Qiang
6 GHz When station is connected to a 6 GHz AP, there are 2 ways to configure the power limit to firmware. The first way is to send 2 WMI commands WMI_PDEV_PARAM_TXPOWER_LIMIT2G/WMI_PDEV_PARAM_TXPOWER_LIMIT5G to firmware, the second way is to send WMI_VDEV_SET_TPC_POWER_CMDID to firmware which includes more parameters for power control. When firmware advertises WMI_TLV_SERVICE_EXT_TPC_REG_SUPPORT, it supports WMI_VDEV_SET_TPC_POWER_CMDID, ath12k uses it to send more parameters to firmware. As chanctx is needed to extract necessary info for this command, save it beforehand in ath12k_mac_op_assign_vif_chanctx(). Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250418-ath12k-6g-lp-vlp-v1-15-c869c86cad60@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: add handler for WMI_VDEV_SET_TPC_POWER_CMDIDBaochen Qiang
Add the handler for WMI_VDEV_SET_TPC_POWER_CMDID, it is for 6 GHz band. A subsequent patch will call this handler to send power parameters to firmware. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250418-ath12k-6g-lp-vlp-v1-14-c869c86cad60@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: fill parameters for vdev set TPC power WMI commandBaochen Qiang
Prepare the parameters which are needed for WMI command WMI_VDEV_SET_TPC_POWER_CMDID. This helper will be used in a following patch. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250418-ath12k-6g-lp-vlp-v1-13-c869c86cad60@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: save max transmit power in vdev start response event from firmwareBaochen Qiang
Save the max transmit power received in the vdev start response event from firmware. A subsequent patch will use this to calculate the final power Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250418-ath12k-6g-lp-vlp-v1-12-c869c86cad60@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: add parse of transmit power envelope elementBaochen Qiang
The Transmit Power Envelope element conveys the local maximum transmit power for various transmission bandwidths, this element is present in various frames, e.g. beacon and probe response etc, transmitted by AP. A station shall determine a local maximum transmit power from it. So parse and save them for later use. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250418-ath12k-6g-lp-vlp-v1-11-c869c86cad60@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: save power spectral density(PSD) of regulatory ruleBaochen Qiang
Currently the power spectral density (PSD) report from firmware is ignored. Since it is needed by cfg80211, report it in struct ieee80211_reg_rule such that cfg80211 can use it. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250418-ath12k-6g-lp-vlp-v1-10-c869c86cad60@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-16wifi: ath12k: update regulatory rules when connection establishedBaochen Qiang
Once connection to AP established we know the exact power type, it is time to update regulatory rules based on such info. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250418-ath12k-6g-lp-vlp-v1-9-c869c86cad60@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-06-15 15:06:04 +0000