| Age | Commit message (Collapse) | Author |
|---|
|
The pd692x0_manager array in this function is really too big to fit on the
stack, though this never triggered a warning until a recent patch made
it slightly bigger:
drivers/net/pse-pd/pd692x0.c: In function 'pd692x0_setup_pi_matrix':
drivers/net/pse-pd/pd692x0.c:1210:1: error: the frame size of 1584 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
Change the function to dynamically allocate the array here.
Fixes: 359754013e6a ("net: pse-pd: pd692x0: Add support for PSE PI priority feature")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250709153210.1920125-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for managing the VDD and VDDA power supplies for the PD692x0
PSE controller, as well as the VAUX5 and VAUX3P3 power supplies for the
PD6920x PSE managers.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-10-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch extends the PSE callbacks by adding support for the newly
introduced pi_set_prio() callback, enabling the configuration of PSE PI
priorities. The current port priority is now also included in the status
information returned to users.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-9-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix incorrect data offset read in the pd692x0_pi_get_pw_limit callback.
The issue was previously unnoticed as it was only used by the regulator
API and not thoroughly tested, since the PSE is mainly controlled via
ethtool.
The function became actively used by ethtool after commit 3e9dbfec4998
("net: pse-pd: Split ethtool_get_status into multiple callbacks"),
which led to the discovery of this issue.
Fix it by using the correct data offset.
Fixes: a87e699c9d33 ("net: pse-pd: pd692x0: Enhance with new current limit and voltage read callbacks")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250217134812.1925345-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The is_enabled callback is now redundant as the admin_state can be obtained
directly from the driver and provides the same information.
To simplify functionality, the core will handle this internally, making
the is_enabled callback unnecessary at the driver level. Remove the
callback from all drivers.
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The ethtool_get_status callback currently handles all status and PSE
information within a single function. This approach has two key
drawbacks:
1. If the core requires some information for purposes other than
ethtool_get_status, redundant code will be needed to fetch the same
data from the driver (like is_enabled).
2. Drivers currently have access to all information passed to ethtool.
New variables will soon be added to ethtool status, such as PSE ID,
power domain IDs, and budget evaluation strategies, which are meant
to be managed solely by the core. Drivers should not have the ability
to modify these variables.
To resolve these issues, ethtool_get_status has been split into multiple
callbacks, with each handling a specific piece of information required
by ethtool or the core.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The regulator framework uses current limits, but the PSE standard and
known PSE controllers rely on power limits. Instead of converting
current to power within each driver, perform the conversion in the PSE
core. This avoids redundancy in driver implementation and aligns better
with the standard, simplifying driver development.
Remove at the same time the _pse_ethtool_get_status() function which is
not needed anymore.
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Kory Maincent <Kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240709105222.168306-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch expands PSE callbacks with newly introduced
pi_get/set_current_limit() and pi_get_voltage() callback.
It also add the power limit ranges description in the status returned.
The only way to set ps692x0 port power limit is by configure the power
class plus a small power supplement which maximum depends on each class.
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240704-feature_poe_power_cap-v6-7-320003204264@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This update expands pd692x0_ethtool_get_status() callback with newly
introduced details such as the detected class, current power delivered,
and extended state information.
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240704-feature_poe_power_cap-v6-3-320003204264@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
While add it, also remove commas after the sentinel entries.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # For mlxsw
Reviewed-by: Kory Maincent <Kory.maincent@bootlin.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> # for mctp-i2c
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20240625083853.2205977-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new driver for the PD692x0 I2C Power Sourcing Equipment controller.
This driver only support i2c communication for now.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-12-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
