| Age | Commit message (Collapse) | Author |
|---|
|
The defines for SUPPORTED_INTERFACES and ADVERTISED_INTERFACES both appear
to be unused. I couldn't find anything that actually references them in the
original diff that added them and it seems like they have persisted despite
using deprecated defines that aren't supposed to be used as per the
ethtool.h header that defines the bits they are composed of.
Since they are unused, and not supposed to be used anymore I am just
dropping the lines of code since they seem to just be occupying space.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/174578398922.1580647.9720643128205980455.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When WoL is enabled, we update the software state in phylink to
indicate that the link is down, and disable the resolver from
bringing the link back up.
On resume, we attempt to bring the overall state into consistency
by calling the .mac_link_down() method, but this is wrong if the
link was already down, as phylink strictly orders the .mac_link_up()
and .mac_link_down() methods - and this would break that ordering.
Fixes: f97493657c63 ("net: phylink: add suspend/resume support")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1u55Qf-0016RN-PA@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
If we fail to configure the MAC or PCS according to the desired mode,
do not allow the network link to come up until we have successfully
configured the MAC and PCS. This improves phylink's behaviour when an
error occurs.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1twkqO-0006FI-Gm@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some MACs require the PHY receive clock to be running to complete setup
actions. This may fail if the PHY has negotiated EEE, the MAC supports
receive clock stop, and the link has entered LPI state. Provide a pair
of APIs that MAC drivers can use to temporarily block the PHY disabling
the receive clock.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tvO6k-008Vjt-MZ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the system is suspended, the PHY may be placed in low-power mode
by setting the BMCR 0.11 Power down bit. IEEE 802.3 states that the
behaviour of the PHY in this state is implementation specific, and
the PHY is not required to meet the RX_CLK and TX_CLK requirements.
Essentially, this means that a PHY may stop the clocks that it is
generating while in power down state.
However, MACs exist which require the clocks from the PHY to be running
in order to properly resume. phylink_prepare_resume() provides them
with a way to clear the Power down bit early.
Note, however, that IEEE 802.3 gives PHYs up to 500ms grace before the
transmit and receive clocks meet the requirements after clearing the
power down bit.
Add a resume preparation function, which will ensure that the receive
clock from the PHY is appropriately configured while resuming.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tvO6V-008Vjb-AP@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
From what I can tell the .get_fixed_state pointer in the phylink structure
hasn't been used since commit 5c05c1dbb177 ("net: phylink, dsa: eliminate
phylink_fixed_state_cb()") . Since I can't find any users for it we might
as well just drop the pointer.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/174240634772.1745174.5690351737682751849.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Phylink has internal code to get the MAC capabilities of a given PHY
interface (what are the supported speed and duplex).
Extract that into phy_caps, but use the link_capa for conversion. Add an
internal phylink helper for the link caps -> mac caps conversion, and
use this in phylink_caps_to_linkmodes().
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-14-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
phylink_caps_to_linkmodes() is used to derive a list of linkmodes that
can be conceivably exposed using a given set of speeds and duplex
through phylink's MAC capabilities.
This list can be derived from the link_caps array in phy_caps, provided
we convert the MAC capabilities into a LINK_CAPA bitmask first.
Introduce an internal phylink helper phylink_caps_to_link_caps() to
convert from MAC capabilities into phy_caps, then phy_caps_linkmodes()
to do the link_caps -> linkmodes conversion.
This avoids having to update phylink for every new linkmode.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-13-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
phylink allows MAC drivers to report the capabilities in terms of speed,
duplex and pause support. This is done through a dedicated set of enum
values in the form of the MAC_ capabilities. They are very close to what
the LINK_CAPA_xxx can express, with the difference that LINK_CAPA don't
have any information about Pause/Asym Pause support.
To prepare converting phylink to using the phy_caps, add the mapping
between MAC capabilities and phy_caps. While doing so, we move the
phylink_caps_params array up a bit to simplify future commits.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-12-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When phylink creates a fixed-link configuration, it finds a matching
linkmode to set as the advertised, lp_advertising and supported modes
based on the speed and duplex of the fixed link.
Use the newly introduced phy_caps_lookup to get these modes instead of
phy_lookup_settings(). This has the side effect that the matched
settings and configured linkmodes may now contain several linkmodes (the
intersection of supported linkmodes from the phylink settings and the
linkmodes that match speed/duplex) instead of the one from
phy_lookup_settings().
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-10-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As the link_caps array is efficient for <speed,duplex> lookups,
implement a function for speed/duplex lookups that matches a given
mask. This replicates to some extent the phy_lookup_settings()
behaviour, matching full link_capabilities instead of a single linkmode.
phy.c's phy_santize_settings() and phylink's
phylink_ethtool_ksettings_set() performs such lookup using the
phy_settings table, but are only interested in the actual speed/duplex
that were matched, rathet than the individual linkmode.
Similar to phy_lookup_settings(), the newly introduced phy_caps_lookup()
will run through the link_caps[] array by descending speed/duplex order.
If the link_capabilities for a given <speed/duplex> tuple intersects the
passed linkmodes, we consider that a match.
Similar to phy_lookup_settings(), we also allow passing an 'exact'
boolean, allowing non-exact match. Here, we MUST always match the
linkmodes mask, but we allow matching on lower speed settings.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-8-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
phylink_init_eee() is currently unused.
It was last added in 2019 by
commit 86e58135bc4a ("net: phylink: add phylink_init_eee() helper")
but it didn't actually wire a use up.
It had previous been removed in 2017 by
commit 939eae25d9a5 ("phylink: remove phylink_init_eee()").
Remove it again.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250306184534.246152-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The phylink_expects_phy() function allows MAC drivers to check if they are
expecting a PHY to attach. The checking condition in phylink_expects_phy()
aims to achieve the same result as the checking condition in
phylink_attach_phy().
However, the checking condition in phylink_expects_phy() uses
pl->link_config.interface, while phylink_attach_phy() uses
pl->link_interface.
Initially, both pl->link_interface and pl->link_config.interface are set
to SGMII, and pl->cfg_link_an_mode is set to MLO_AN_INBAND.
When the interface switches from SGMII to 2500BASE-X,
pl->link_config.interface is updated by phylink_major_config().
At this point, pl->cfg_link_an_mode remains MLO_AN_INBAND, and
pl->link_config.interface is set to 2500BASE-X.
Subsequently, when the STMMAC interface is taken down
administratively and brought back up, it is blocked by
phylink_expects_phy().
Since phylink_expects_phy() and phylink_attach_phy() aim to achieve the
same result, phylink_expects_phy() should check pl->link_interface,
which never changes, instead of pl->link_config.interface, which is
updated by phylink_major_config().
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Link: https://patch.msgid.link/20250227121522.1802832-2-yong.liang.choong@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As all PCS are using the neg_mode parameter rather than the legacy
an_mode, remove the ability to use the legacy an_mode. We remove the
tests in the phylink code, unconditionally passing the PCS neg_mode
parameter to PCS methods, and remove setting the flag from drivers.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tidPn-0040hd-2R@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are hooks in the stmmac driver into XPCS to control the EEE
settings when LPI is configured at the MAC. This bypasses the layering.
To allow this to be removed from the stmmac driver, add two new
methods for PCS to inform them when the LPI/EEE enablement state
changes at the MAC.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1thRQ3-003w6u-RH@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.14-rc3).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Provide a helper to determine whether the MAC operations structure
implements the LPI operations, which will be used by both phylink and
DSA.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1thR9g-003vX6-4s@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We should not be configuring the PHYs clock-stop settings unless the
MAC supports phylink managed EEE. Make this dependent on MAC support.
This was noticed in a suspicious RCU usage report from the kernel
test robot (the suspicious RCU usage due to calling phy_detach()
remains unaddressed, but is triggered by the error this was
generating.)
Fixes: 03abf2a7c654 ("net: phylink: add EEE management")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tgjNn-003q0w-Pw@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some PHYs don't support clause 45 access, and return -EOPNOTSUPP from
phy_modify_mmd(), which causes phylink_bringup_phy() to fail. Prevent
this failure by allowing -EOPNOTSUPP to also mean success.
Reported-by: Jiawen Wu <jiawenwu@trustnetic.com>
Tested-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/E1tZp1a-001V62-DT@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Background: https://lore.kernel.org/r/20250107123615.161095-1-ericwouds@gmail.com
Since adding negotiation of in-band capabilities, it is no longer
sufficient to just look at the MLO_AN_xxx mode and PHY interface to
decide whether to do a major configuration, since the result now
depends on the capabilities of the attaching PHY.
Always trigger a major configuration in this case.
Testing log: https://lore.kernel.org/r/f20c9744-3953-40e7-a9c9-5534b25d2e2a@gmail.com
Reported-by: Eric Woudstra <ericwouds@gmail.com>
Tested-by: Eric Woudstra <ericwouds@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add EEE management to phylink, making use of the phylib implementation.
This will only be used where a MAC driver populates the methods and
capabilities bitfield, otherwise we keep our old behaviour.
Phylink will keep track of the EEE configuration, including the clock
stop abilities at each end of the MAC to PHY link, programming the PHY
appropriately and preserving the LPI configuration should the PHY go
away.
Phylink will call into the MAC driver when LPI needs to be enabled or
disabled, with the requirement that the MAC have LPI disabled prior
to the netdev being brought up (in other words, it will only call
mac_disable_tx_lpi() if it has already called mac_enable_tx_lpi().)
Support for phylink managed EEE is enabled by populating both tx_lpi
MAC operations method pointers, and filling in both LPI interfaces
and capabilities. If the methods are provided but the LPI interfaces
or capabilities remain empty, this indicates to phylink that EEE is
implemented by the driver but the hardware it is driving does not
support EEE, and thus the ethtool set_eee() and get_eee() methods will
return EOPNOTSUPP.
No validation of the LPI timer value is performed by this patch.
For interface modes which do not support LPI, we make no attempt to
manipulate the phylib EEE advertisement, but instead refuse to
activate LPI at the MAC, noting it at debug message level.
We also restrict the advertisement and reported userspace support
linkmode masks according to the lpi_capabilities provided to
phylink by the MAC driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1tYADq-0014Pn-J1@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a helper to determine whether the link is up or down. Currently
this is only used in one location, but becomes necessary to test
when reconfiguring EEE.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1tYADl-0014Ph-EV@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When decoding clause 22 state, if in-band is disabled and using either
1000base-X or 2500base-X, rather than reporting link-down, we know the
speed, and we only support full duplex. Pause modes taken from XPCS.
This fixes a problem reported by Eric Woudstra.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1tXGei-000EtL-Fn@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rather than using the state of the Autoneg bit, which is unreliable
with the new PCS neg mode support, use the passed neg_mode to decide
whether to decode the link partner advertisement data.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1tXGed-000EtF-CN@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pass the current neg_mode into phylink_mii_c22_pcs_get_state() and
phylink_mii_c22_pcs_decode_state(). Update all users of phylink PCS
that use these functions.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1tXGeY-000Et9-8g@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pass the current neg_mode into the .pcs_get_state() method. Update all
users of phylink PCS.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1tXGeT-000Et3-4L@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As in-band AN no longer just depends on MLO_AN_INBAND + Autoneg bit,
we need to take account of the pcs_neg_mode when deciding how to
initialise the speed, duplex and pause state members before calling
into the .pcs_neg_mode() method. Add this.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1tXGeO-000Esx-0r@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for the PCS to specify which interfaces it supports, which
can be used by MAC drivers to build the main supported_interfaces
bitmap. Phylink also validates that the PCS returned by the MAC driver
supports the interface that the MAC was asked for.
An empty supported_interfaces bitmap from the PCS indicates that it
does not provide this information, and we handle that appropriately.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tTffL-007RoD-1Y@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
PHY driver
It seems that phylink does not support driving PHYs in SFP modules using
the Generic PHY or Generic Clause 45 PHY driver. I've come to this
conclusion after analyzing these facts:
- sfp_sm_probe_phy(), who is our caller here, first calls
phy_device_register() and then sfp_add_phy() -> ... ->
phylink_sfp_connect_phy().
- phydev->supported is populated by phy_probe()
- phy_probe() is usually called synchronously from phy_device_register()
via phy_bus_match(), if a precise device driver is found for the PHY.
In that case, phydev->supported has a good chance of being set to a
non-zero mask.
- There is an exceptional case for the PHYs for which phy_bus_match()
didn't find a driver. Those devices sit for a while without a driver,
then phy_attach_direct() force-binds the genphy_c45_driver or
genphy_driver to them. Again, this triggers phy_probe() and renders
a good chance of phydev->supported being populated, assuming
compatibility with genphy_read_abilities() or
genphy_c45_pma_read_abilities().
- phylink_sfp_config_phy() does not support the exceptional case of
retrieving phydev->supported from the Generic PHY driver, due to its
code flow. It expects the phydev->supported mask to already be
non-empty, because it first calls phylink_validate() on it, and only
calls phylink_attach_phy() if that succeeds. Thus, phylink_attach_phy()
-> phy_attach_direct() has no chance of running.
It is not my wish to change the state of affairs by altering the code
flow, but merely to document the limitation rather than have the current
unspecific error:
[ 61.800079] mv88e6085 d0032004.mdio-mii:12 sfp: validation with support 00,00000000,00000000,00000000 failed: -EINVAL
[ 61.820743] sfp sfp: sfp_add_phy failed: -EINVAL
On the premise that an empty phydev->supported is going to make
phylink_validate() fail anyway, and that this is caused by a missing PHY
driver, it would be more informative to single out that case, undercut
the entire phylink_sfp_config_phy() call, including phylink_validate(),
and print a more specific message for this common gotcha:
[ 37.076403] mv88e6085 d0032004.mdio-mii:12 sfp: PHY i2c:sfp:16 (id 0x01410cc2) has no driver loaded
[ 37.089157] mv88e6085 d0032004.mdio-mii:12 sfp: Drivers which handle known common cases: CONFIG_BCM84881_PHY, CONFIG_MARVELL_PHY
[ 37.108047] sfp sfp: sfp_add_phy failed: -EINVAL
Link: https://lore.kernel.org/netdev/20241113144229.3ff4bgsalvj7spb7@skbuf/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20241212140834.278894-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove phylink_phy_no_inband() now that we are handling the lack of
inband negotiation by querying the capabilities of the PHY and PCS,
and the BCM84881 PHY driver provides us the information necessary to
make the decision.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUsO-006IUt-KN@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support for in-band signalling with Serdes links is uncertain. Some
PHYs do not support in-band for e.g. SGMII. Some PCS do not support
in-band for 2500Base-X. Some PCS require in-band for Base-X protocols.
Simply using what is in DT is insufficient when we have hot-pluggable
PHYs e.g. in the form of SFP modules, which may not provide the
in-band signalling.
In order to address this, we have introduced phy_inband_caps() and
pcs_inband_caps() functions to allow phylink to retrieve the
capabilities from each end of the PCS/PHY link. This commit adds code
to resolve whether in-band will be used in the various scenarios that
we have: In-band not being used, PHY present using SGMII or Base-X,
PHY not present. We also deal with no capabilties provided.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUsJ-006IUn-H3@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a pcs_inband_caps() method to query the PCS for its inband link
capabilities, and use this to determine whether link modes used with
optical SFPs can be supported.
When a PCS does not provide a method, we allow inband negotiation to
be either on or off, making this a no-op until the pcs_inband_caps()
method is implemented by a PCS driver.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUs4-006IUU-7K@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that we have a more complexity in phylink_major_config(), augment
the debugging so we can see what's going on there.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUrZ-006ITt-Fa@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is an interdependence between the current link_an_mode and
pcs_neg_mode that some drivers rely upon to know whether inband or PHY
mode will be used.
In order to support detection of PCS and PHY inband capabilities
resulting in automatic selection of inband or PHY mode, we need to
cater for this, and support changing the MAC link_an_mode. However, we
end up with an inter-dependency between the current link_an_mode and
pcs_neg_mode.
To solve this, split the current link_an_mode into the requested
link_an_mode and active link_an_mode. The requested link_an_mode will
always be passed to phylink_pcs_neg_mode(), and the active link_an_mode
will be used for everything else, and only updated during
phylink_major_config(). This will ensure that phylink_pcs_neg_mode()'s
link_an_mode will not depend on the active link_an_mode that will,
in a future patch, depend on pcs_neg_mode.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUrU-006ITn-Ai@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the call to phylink_pcs_neg_mode() in phylink_major_config() after
we have selected the appropriate PCS to allow the PCS to be passed in.
Add struct phylink and struct phylink_pcs pointers to
phylink_pcs_neg_mode() and pass in the appropriate structures. Set
pl->pcs_neg_mode before returning, and remove the return value.
This will allow the capabilities of the PCS and any PHY to be used when
deciding which pcs_neg_mode should be used.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUrP-006ITh-6u@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc8).
Conflicts:
tools/testing/selftests/net/.gitignore
252e01e68241 ("selftests: net: add netlink-dumps to .gitignore")
be43a6b23829 ("selftests: ncdevmem: Move ncdevmem under drivers/net/hw")
https://lore.kernel.org/all/20241113122359.1b95180a@canb.auug.org.au/
drivers/net/phy/phylink.c
671154f174e0 ("net: phylink: ensure PHY momentary link-fails are handled")
7530ea26c810 ("net: phylink: remove "using_mac_select_pcs"")
Adjacent changes:
drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c
5b366eae7193 ("stmmac: dwmac-intel-plat: fix call balance of tx_clk handling routines")
e96321fad3ad ("net: ethernet: Switch back to struct platform_driver::remove()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Normally, phylib won't notify changes in quick succession. However, as
a result of commit 3e43b903da04 ("net: phy: Immediately call
adjust_link if only tx_lpi_enabled changes") this is no longer true -
it is now possible that phy_link_down() and phy_link_up() will both
complete before phylink's resolver has run, which means it'll miss that
pl->phy_state.link momentarily became false.
Rename "mac_link_dropped" to be more generic "link_failed" since it will
cover more than the MAC/PCS end of the link failing, and arrange to set
this in phylink_phy_change() if we notice that the PHY reports that the
link is down.
This will ensure that we capture an EEE reconfiguration event.
Fixes: 3e43b903da04 ("net: phy: Immediately call adjust_link if only tx_lpi_enabled changes")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/E1tAtcW-002RBS-LB@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that we have reduced the indentation level, clean up the code
formatting.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1t9RQz-002Ff5-EA@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The switch() statement doesn't sit very well with the preceeding if()
statements, so let's just convert everything to if()s. As a result of
the two preceding commits, there is now only one case in the switch()
statement. Remove the switch statement and reduce the code indentation.
Code reformatting will be in the following commit.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1t9RQu-002Fez-AA@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The switch() statement doesn't sit very well with the preceeding if()
statements, and results in excessive indentation that spoils code
readability. Continue cleaning this up by converting the MLO_AN_PHY
case to use an if() statmeent.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1t9RQp-002Fet-5W@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The switch() statement doesn't sit very well with the preceeding if()
statements, and results in excessive indentation that spoils code
readability. Begin cleaning this up by converting the MLO_AN_FIXED case
to an if() statement.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1t9RQk-002Fen-1A@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the handling of manual flow control configuration to a common
location during resolve. We currently evaluate this for all but
fixed links.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1t9RQe-002Feh-T1@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are a few issues with how SFP PHYs are attached:
a) The phylink_sfp_connect_phy() and phylink_sfp_config_phy() code
validates the configuration three times:
1. To discover the support/advertising masks that the PHY/PCS/MAC
can support in order to select an interface.
2. To validate the selected interface.
3. When the PHY is brought up after being attached, another validation
is done.
This is needlessly complex.
b) The configuration is set prior to the PHY being attached, which
means we don't have the PHY available in phylink_major_config()
for phylink_pcs_neg_mode() to make decisions upon.
We have already added an extra step to validate the selected interface,
so we can now move the attachment and bringup of the PHY earlier,
inside phylink_sfp_config_phy(). This results in the validation at
step 2 above becoming entirely unnecessary, so remove that too.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1t3bcb-000c8H-3e@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Validate that the returned interface from sfp_select_interface() is
supportable by the MAC/PCS. If it isn't, print an error and return
the NA interface type. This is a preparatory step to reorganising
how a PHY on a SFP module is handled.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1t3bcV-000c8B-Vz@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Whenever we call sfp_select_interface(), we check the returned value
and print an error. There are two cases where this happens with the
same message. Provide a common function to do this.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1t3bcQ-000c85-S4@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
phylink_parse_fixedlink() wants to preserve the pause, asym_pause and
autoneg bits in pl->supported. Rather than reading the bits into
separate bools, zeroing pl->supported, and then setting them if they
were previously set, use a mask and linkmode_and() to achieve the same
result.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/E1t3Fh5-000aQi-Nk@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With DSA's implementation of the mac_select_pcs() method removed, we
can now remove the detection of mac_select_pcs() implementation.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
When the mac_select_pcs() method is not implemented, there is no way
for pl->pcs to be set to a non-NULL value. This was here to support
the old phylink_set_pcs() method which has been removed a few years
ago. Simplify the code in phylink_validate_mac_and_pcs().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
phylink has historically not permitted a PCS to be removed. An attempt
to permit this with phylink_set_pcs() resulted in comments indicating
that there was no need for this. This behaviour has been propagated
forward to the mac_select_pcs() approach as it was believed from these
comments that changing this would be NAK'd.
However, with mac_select_pcs(), it takes more code and thus complexity
to maintain this behaviour, which can - and in this case has - resulted
in a bug. If mac_select_pcs() returns NULL for a particular interface
type, but there is already a PCS in-use, then we skip the pcs_validate()
method, but continue using the old PCS. Also, it wouldn't be expected
behaviour by implementers of mac_select_pcs().
Allow this by removing this old unnecessary restriction.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
