summaryrefslogtreecommitdiff
path: root/drivers/net/netdevsim/netdevsim.h
AgeCommit message (Collapse)Author
9 daysnetdevsim: add fw_update_flash_chunk_time_ms debugfs knobsJiri Pirko
Netdevsim emulates firmware update and it takes 5 seconds to complete. For some use cases, this is too long and unnecessary. Allow user to configure the time by exposing debugfs a knob to set chunk time. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20250722091945.79506-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11net: netdevsim: Support setting dev->perm_addr on port creationToke Høiland-Jørgensen
Network management daemons that match on the device permanent address currently have no virtual interface types to test against. NetworkManager, in particular, has carried an out of tree patch to set the permanent address on netdevsim devices to use in its CI for this purpose. To support this use case, support setting netdev->perm_addr when creating a netdevsim port. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://patch.msgid.link/20250710-netdevsim-perm_addr-v4-1-c9db2fecf3bf@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-02selftest: netdevsim: Add devlink rate tc-bw testCarolina Jubran
Test verifies that netdevsim correctly implements devlink ops callbacks that set tc-bw on leaf or node rate object. Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250629142138.361537-4-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19netdevsim: migrate to dstats stats collectionBreno Leitao
Replace custom statistics tracking with the kernel's dstats infrastructure to simplify code and improve consistency with other network drivers. This change: - Sets dev->pcpu_stat_type = NETDEV_PCPU_STAT_DSTATS for automatic automatic allocation and deallocation. - Removes manual stats fields and their update - Replaces custom nsim_get_stats64() with dev_get_stats() - Uses dev_dstats_tx_add() and dev_dstats_tx_dropped() helpers - Eliminates the need for manual synchronization primitives The dstats framework provides the same functionality with less code. Suggested-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Joe Damato <joe@dama.to> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250618-netdevsim_stat-v4-1-19fe0d35e28e@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18netdevsim: remove udp_ports_sleepStanislav Fomichev
Now that there is only one path in udp_tunnel, there is no need to have udp_ports_sleep knob. Remove it and adjust the test. Cc: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com> Link: https://patch.msgid.link/20250616162117.287806-6-stfomichev@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-03netdevsim: add dummy device notifiersStanislav Fomichev
In order to exercise and verify notifiers' locking assumptions, register dummy notifiers (via register_netdevice_notifier_dev_net). Share notifier event handler that enforces the assumptions with lock_debug.c (rename and export rtnl_net_debug_event as netdev_debug_event). Add ops lock asserts to netdev_debug_event. Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250401163452.622454-6-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-25Merge tag 'ipsec-next-2025-03-24' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2025-03-24 1) Prevent setting high order sequence number bits input in non-ESN mode. From Leon Romanovsky. 2) Support PMTU handling in tunnel mode for packet offload. From Leon Romanovsky. 3) Make xfrm_state_lookup_byaddr lockless. From Florian Westphal. 4) Remove unnecessary NULL check in xfrm_lookup_with_ifid(). From Dan Carpenter. * tag 'ipsec-next-2025-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next: xfrm: Remove unnecessary NULL check in xfrm_lookup_with_ifid() xfrm: state: make xfrm_state_lookup_byaddr lockless xfrm: check for PMTU in tunnel mode for packet offload xfrm: provide common xdo_dev_offload_ok callback implementation xfrm: rely on XFRM offload xfrm: simplify SA initialization routine xfrm: delay initialization of offload path till its actually requested xfrm: prevent high SEQ input in non-ESN mode ==================== Link: https://patch.msgid.link/20250324061855.4116819-1-steffen.klassert@secunet.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21xfrm: provide common xdo_dev_offload_ok callback implementationLeon Romanovsky
Almost all drivers except bond and nsim had same check if device can perform XFRM offload on that specific packet. The check was that packet doesn't have IPv4 options and IPv6 extensions. In NIC drivers, the IPv4 HELEN comparison was slightly different, but the intent was to check for the same conditions. So let's chose more strict variant as a common base. Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2025-02-20netdevsim: call napi_schedule from a timer contextBreno Leitao
The netdevsim driver was experiencing NOHZ tick-stop errors during packet transmission due to pending softirq work when calling napi_schedule(). This issue was observed when running the netconsole selftest, which triggered the following error message: NOHZ tick-stop error: local softirq work is pending, handler #08!!! To fix this issue, introduce a timer that schedules napi_schedule() from a timer context instead of calling it directly from the TX path. Create an hrtimer for each queue and kick it from the TX path, which then schedules napi_schedule() from the timer context. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250219-netdevsim-v3-1-811e2b8abc4c@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27net: netdevsim: try to close UDP port harness racesJakub Kicinski
syzbot discovered that we remove the debugfs files after we free the netdev. Try to clean up the relevant dir while the device is still around. Reported-by: syzbot+2e5de9e3ab986b71d2bf@syzkaller.appspotmail.com Fixes: 424be63ad831 ("netdevsim: add UDP tunnel port offload support") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250122224503.762705-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-15netdevsim: add HDS featureTaehee Yoo
HDS options(tcp-data-split, hds-thresh) have dependencies between other features like XDP. Basic dependencies are checked in the core API. netdevsim is very useful to check basic dependencies. The default tcp-data-split mode is UNKNOWN but netdevsim driver returns ENABLED when ethtool dumps tcp-data-split mode. The default value of HDS threshold is 0 and the maximum value is 1024. ethtool shows like this. ethtool -g eni1np1 Ring parameters for eni1np1: Pre-set maximums: ... HDS thresh: 1024 Current hardware settings: ... TCP data split: on HDS thresh: 0 ethtool -G eni1np1 tcp-data-split on hds-thresh 1024 ethtool -g eni1np1 Ring parameters for eni1np1: Pre-set maximums: ... HDS thresh: 1024 Current hardware settings: ... TCP data split: on HDS thresh: 1024 Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://patch.msgid.link/20250114142852.3364986-10-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-09netdevsim: add debugfs-triggered queue resetJakub Kicinski
Support triggering queue reset via debugfs for an upcoming test. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-09netdevsim: add queue management API supportJakub Kicinski
Add queue management API support. We need a way to reset queues to test NAPI reordering, the queue management API provides a handy scaffolding for that. Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-09netdevsim: allocate rqs individuallyJakub Kicinski
Make nsim->rqs an array of pointers and allocate them individually so that we can swap them out one by one. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-08netdevsim: add NAPI supportDavid Wei
Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by: David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-15net: netdevsim: add some fake page pool useJakub Kicinski
Add very basic page pool use so that we can exercise the netlink uAPI in a selftest. Page pool gets created on open, destroyed on close. But we control allocating of a single page thru debugfs. This page may survive past the page pool itself so that we can test orphaned page pools. Link: https://lore.kernel.org/r/20240412141436.828666-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-01netdevsim: forward skbs from one connected port to anotherDavid Wei
Forward skbs sent from one netdevsim port to its connected netdevsim port using dev_forward_skb, in a spirit similar to veth. Add a tx_dropped variable to struct netdevsim, tracking the number of skbs that could not be forwarded using dev_forward_skb(). The xmit() function accessing the peer ptr is protected by an RCU read critical section. The rcu_read_lock() is functionally redundant as since v5.0 all softirqs are implicitly RCU read critical sections; but it is useful for human readers. If another CPU is concurrently in nsim_destroy(), then it will first set the peer ptr to NULL. This does not affect any existing readers that dereferenced a non-NULL peer. Then, in unregister_netdevice(), there is a synchronize_rcu() before the netdev is actually unregistered and freed. This ensures that any readers i.e. xmit() that got a non-NULL peer will complete before the netdev is freed. Any readers after the RCU_INIT_POINTER() but before synchronize_rcu() will dereference NULL, making it safe. The codepath to nsim_destroy() and nsim_create() takes both the newly added nsim_dev_list_lock and rtnl_lock. This makes it safe with concurrent calls to linking two netdevsims together. Signed-off-by: David Wei <dw@davidwei.uk> Reviewed-by: Maciek Machnikowski <maciek@machnikowski.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01netdevsim: allow two netdevsim ports to be connectedDavid Wei
Add two netdevsim bus attribute to sysfs: /sys/bus/netdevsim/link_device /sys/bus/netdevsim/unlink_device Writing "A M B N" to link_device will link netdevsim M in netnsid A with netdevsim N in netnsid B. Writing "A M" to unlink_device will unlink netdevsim M in netnsid A from its peer, if any. rtnl_lock is taken to ensure nothing changes during the linking. Signed-off-by: David Wei <dw@davidwei.uk> Reviewed-by: Maciek Machnikowski <maciek@machnikowski.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-09net: netdevsim: use mock PHC driverVladimir Oltean
I'd like to make netdevsim offload tc-taprio, but currently, this Qdisc emits a ETHTOOL_GET_TS_INFO call to the driver to make sure that it has a PTP clock, so that it is reasonably capable of offloading the schedule. By using the mock PHC driver, that becomes possible. Hardware timestamping is not necessary, and netdevsim does not support packet I/O anyway. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230807193324.4128292-8-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-14netdevsim: add dummy macsec offloadSabrina Dubroca
When the kernel is compiled with MACsec support, add the NETIF_F_HW_MACSEC feature to netdevsim devices and implement macsec_ops. To allow easy testing of failure from the device, support is limited to 3 SecY's per netdevsim device, and 1 RXSC per SecY. v2: - nsim_macsec_add_secy, return -ENOSPC if secy_count isn't full but we can't find an empty slot (Simon Horman) - add sci_to_cpu to make sparse happy (Simon Horman) - remove set but not used secy variable (kernel test robot and Simon Horman) Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-18netdevsim: convert driver to use unlocked devlink API during init/finiJiri Pirko
Prepare for devlink reload being called with devlink->lock held and convert the netdevsim driver to use unlocked devlink API during init and fini flows. Take devl_lock() in reload_down() and reload_up() ops in the meantime before reload cmd is converted to take the lock itself. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-21netdevsim: replace vfs_lock with devlink instance lockJakub Kicinski
Similarly to the previous commit, use the devlink instance lock and let it replace the vfs_lock. nsim_esw_legacy_enable() was locked by both port lock and vfs lock so one set of lock/unlocks goes away. netdevsim's .eswitch_mode_set callback is now ready for the callback to take the instance lock. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-21netdevsim: replace port_list_lock with devlink instance lockJakub Kicinski
Take advantage of the devlink instance lock for protecting the port list. This will simplify locking even more once all devlink callbacks hold the instance lock. We need to add locking in nsim_dev_port_add_all() which used to assume higher layer protection when accessing the list. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-15netdevsim: Introduce support for L3 offload xstatsPetr Machata
Add support for testing of HW stats support that was added recently, namely the L3 stats support. L3 stats are provided for devices for which the L3 stats have been turned on, and that were enabled for netdevsim through a debugfs toggle: # echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/enable_ifindex For fully enabled netdevices, netdevsim counts 10pps of ingress traffic and 20pps of egress traffic. Similarly, L3 stats can be disabled for a given device, and netdevsim ceases pretending there is any HW traffic going on: # echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/disable_ifindex Besides this, there is a third toggle to mark a device for future failure: # echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/fail_next_enable A future request to enable L3 stats on such netdevice will be bounced by netdevsim: # ip -j l sh dev d | jq '.[].ifindex' 66 # echo 66 > /sys/kernel/debug/netdevsim/netdevsim10/hwstats/l3/enable_ifindex # echo 66 > /sys/kernel/debug/netdevsim/netdevsim10/hwstats/l3/fail_next_enable # ip stats set dev d l3_stats on Error: netdevsim: Stats enablement set to fail. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2021-11-01netdevsim: rename 'driver' entry pointsJakub Kicinski
Rename functions serving as driver entry points from nsim_dev_... to nsim_drv_... this makes the API boundary between bus and dev clearer. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01netdevsim: move max vf config to devJakub Kicinski
max_vfs is a strange little beast because the file hangs off of nsim's debugfs, but it configures a field in the bus device. Move it to dev.c, let's look at it as if the device driver was imposing VF limit based on FW info (like pci_sriov_set_totalvfs()). Again, when moving refactor the function not to hold the vfs lock pointlessly while parsing the input. Wrap the access from the read side in READ_ONCE() to appease concurrency checkers. Do not check if return value from snprintf() is negative... Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01netdevsim: move details of vf config to devJakub Kicinski
Since "eswitch" configuration was added bus.c contains a lot of device details which really belong to dev.c. Restructure the code while moving it. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01netdevsim: move vfconfig to nsim_devJakub Kicinski
When netdevsim got split into the faux bus vfconfig ended up in the bus device (think pci_dev) which is strange because it contains very networky not to say netdevy information. Move it to nsim_dev, which is the driver "priv" structure for the device. To make sure we don't race with probe/remove take the device lock (much like PCI). While at it remove the NULL-checking of vfconfigs. It appears to be pointless. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29netdevsim: remove max_vfs dentryJakub Kicinski
Commit d395381909a3 ("netdevsim: Add max_vfs to bus_dev") added this file and saved the dentry for no apparent reason. Link: https://lore.kernel.org/r/20211028211753.22612-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-15netdevsim: add ability to change channel countJakub Kicinski
For testing visibility of mq/mqprio default children. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-06netdevsim: Protect both reload_down and reload_up pathsLeon Romanovsky
Don't progress with adding and deleting ports as long as devlink reload is running. Fixes: 23809a726c0d ("netdevsim: Forbid devlink reload when adding or deleting ports") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-16netdevsim: Add multi-queue supportPeilin Ye
Currently netdevsim only supports a single queue per port, which is insufficient for testing multi-queue TC schedulers e.g. sch_mq. Extend the current sysfs interface so that users can create ports with multiple queues: $ echo "[ID] [PORT_COUNT] [NUM_QUEUES]" > /sys/bus/netdevsim/new_device As an example, echoing "2 4 8" creates 4 ports, with 8 queues per port. Note, this is compatible with the current interface, with default number of queues set to 1. For example, echoing "2 4" creates 4 ports with 1 queue per port; echoing "2" simply creates 1 port with 1 queue. Reviewed-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18drivers: net: netdevsim: fix devlink_trap selftests failingOleksandr Mazur
devlink_trap tests for the netdevsim fail due to misspelled debugfs file name. Change this name, as well as name of callback function, to match the naming as in the devlink itself - 'trap_drop_counter'. Test-results: selftests: drivers/net/netdevsim: devlink_trap.sh TEST: Initialization [ OK ] TEST: Trap action [ OK ] TEST: Trap metadata [ OK ] TEST: Non-existing trap [ OK ] TEST: Non-existing trap action [ OK ] TEST: Trap statistics [ OK ] TEST: Trap group action [ OK ] TEST: Non-existing trap group [ OK ] TEST: Trap group statistics [ OK ] TEST: Trap policer [ OK ] TEST: Trap policer binding [ OK ] TEST: Port delete [ OK ] TEST: Device delete [ OK ] Fixes: a7b3527a43fe ("drivers: net: netdevsim: add devlink trap_drop_counter_get implementation") Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-14drivers: net: netdevsim: add devlink trap_drop_counter_get implementationOleksandr Mazur
Whenever query statistics is issued for trap with DROP action, devlink subsystem would also fill-in statistics 'dropped' field. In case if device driver did't register callback for hard drop statistics querying, 'dropped' field will be omitted and not filled. Add trap_drop_counter_get callback implementation to the netdevsim. Add new test cases for netdevsim, to test both the callback functionality, as well as drop statistics alteration check. Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02netdevsim: Allow setting parent node of rate objectsDmytro Linkin
Implement new devlink ops that allow setting rate node as a parent for devlink port (leaf) or another devlink node through devlink API. Expose parent names to netdevsim debugfs in read only mode. Co-developed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02netdevsim: Implement support for devlink rate nodesDmytro Linkin
Implement new devlink ops that allow creation, deletion and setting of shared/max tx rate of devlink rate nodes through devlink API. Expose rate node and it's tx rates to netdevsim debugfs. Co-developed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02netdevsim: Implement legacy/switchdev mode for VFsDmytro Linkin
Implement callbacks to set/get eswitch mode value. Add helpers to check current mode. Instantiate VFs' net devices and devlink ports on switchdev enabling and remove them on legacy enabling. Changing number of VFs while in switchdev mode triggers VFs creation/deletion. Also disable NDO API callback to set VF rate, since it's legacy API. Switchdev API to set VF rate will be implemented in one of the next patches. Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02netdevsim: Implement port types and indexingDmytro Linkin
Define type of ports, which netdevsim driver currently operates with as PF. Define new port type - VF, which will be implemented in following patches. Add helper functions to distinguish them. Add helper function to get VF index from port index. Add port indexing logic where PFs' indexes starts from 0, VFs' - from NSIM_DEV_VF_PORT_INDEX_BASE. All ports uses same index pool, which means that PF port may be created with index from VFs' indexes range. Maximum number of VFs, which the driver can allocate, is limited by UINT_MAX - BASE. Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02netdevsim: Disable VFs on nsim_dev_reload_destroy() callDmytro Linkin
Move VFs disabling from device release() to nsim_dev_reload_destroy() to make VFs disabling and ports removal simultaneous. This is a requirement for VFs ports implemented in next patches. Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02netdevsim: Add max_vfs to bus_devDmytro Linkin
Currently there is no limit to the number of VFs netdevsim can enable. In a real systems this value exist and used by the driver. Fore example, some features might need to consider this value when allocating memory. Expose max_vfs variable to debugfs as configurable resource. If are VFs configured (num_vfs != 0) then changing of max_vfs not allowed. Co-developed-by: Yuval Avnery <yuvalav@nvidia.com> Signed-off-by: Yuval Avnery <yuvalav@nvidia.com> Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-31netdevsim: add FEC settings supportJakub Kicinski
Add support for ethtool FEC and some ethtool error injection. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-14netdevsim: Add dummy psample implementationIdo Schimmel
Allow netdevsim to report "sampled" packets to the psample module by periodically generating packets from a work queue. The behavior can be enabled / disabled (default) and the various meta data attributes can be controlled via debugfs knobs. This implementation enables both testing of the psample module with all the optional attributes as well as development of user space applications on top of psample such as hsflowd and a Wireshark dissector for psample generic netlink packets. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
xdp_return_frame_bulk() needs to pass a xdp_buff to __xdp_return(). strlcpy got converted to strscpy but here it makes no functional difference, so just keep the right code. Conflicts: net/netfilter/nf_tables_api.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-09netdevsim: Add debugfs toggle to reject BPF programs in verifierToke Høiland-Jørgensen
This adds a new debugfs toggle ('bpf_bind_verifier_accept') that can be used to make netdevsim reject BPF programs from being accepted by the verifier. If this toggle (which defaults to true) is set to false, nsim_bpf_verify_insn() will return EOPNOTSUPP on the last instruction (after outputting the 'Hello from netdevsim' verifier message). This makes it possible to check the verification callback in the driver from test_offload.py in selftests, since the verifier now clears the verifier log on a successful load, hiding the message from the driver. Fixes: 6f8a57ccf851 ("bpf: Make verifier log more relevant by default") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/160752225964.110217.12584017165318065332.stgit@toke.dk
2020-11-20netdevsim: support ethtool ring and coalesce settingsAntonio Cardace
Add ethtool ring and coalesce settings support for testing. Signed-off-by: Antonio Cardace <acardace@redhat.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20netdevsim: move ethtool pause params in separate structAntonio Cardace
This will help the refactoring in the next commit when coalesce and ring settings are added. Signed-off-by: Antonio Cardace <acardace@redhat.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-06netdevsim: Add devlink resource for nexthopsIdo Schimmel
The Spectrum ASIC has a dedicated table where nexthops (i.e., adjacency entries) are populated. The size of this table can be controlled via devlink-resource. Add such a resource to netdevsim so that its occupancy will reflect the number of nexthop objects currently programmed to the device. By limiting the size of the resource, error paths could be exercised and tested. Example output: # devlink resource show netdevsim/netdevsim10 netdevsim/netdevsim10: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none resources: name fib size unlimited occ 4 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name fib-rules size unlimited occ 3 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name IPv6 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none resources: name fib size unlimited occ 1 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name fib-rules size unlimited occ 2 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name nexthops size unlimited occ 0 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-28netdevsim: support the static IANA VXLAN port flagJakub Kicinski
Allow setting UDP_TUNNEL_NIC_INFO_STATIC_IANA_VXLAN. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28netdevsim: shared UDP tunnel port table supportJakub Kicinski
Add the ability to simulate a device with a shared UDP tunnel port table. Try to reject the configurations and actions which are not supported by the core, so we don't get syzcaller etc. warning reports. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25netdevsim: add support for flash_update overwrite maskJacob Keller
The devlink interface recently gained support for a new "overwrite mask" parameter that allows specifying how various sub-sections of a flash component are modified when updating. Add support for this to netdevsim, to enable easily testing the interface. Make the allowed overwrite mask values controllable via a debugfs parameter. This enables testing a flow where the driver rejects an unsupportable overwrite mask. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 05:42:29 +0000