summaryrefslogtreecommitdiff
path: root/drivers/net/netdevsim/netdevsim.h
AgeCommit message (Collapse)Author
2020-09-28netdevsim: support the static IANA VXLAN port flagJakub Kicinski
Allow setting UDP_TUNNEL_NIC_INFO_STATIC_IANA_VXLAN. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28netdevsim: shared UDP tunnel port table supportJakub Kicinski
Add the ability to simulate a device with a shared UDP tunnel port table. Try to reject the configurations and actions which are not supported by the core, so we don't get syzcaller etc. warning reports. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25netdevsim: add support for flash_update overwrite maskJacob Keller
The devlink interface recently gained support for a new "overwrite mask" parameter that allows specifying how various sub-sections of a flash component are modified when updating. Add support for this to netdevsim, to enable easily testing the interface. Make the allowed overwrite mask values controllable via a debugfs parameter. This enables testing a flow where the driver rejects an unsupportable overwrite mask. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-15netdevsim: add pause frame statsJakub Kicinski
Add minimal ethtool interface for testing ethtool pause stats. v2: add missing static on nsim_ethtool_ops Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-25bpf, xdp: Remove XDP_QUERY_PROG and XDP_QUERY_PROG_HW XDP commandsAndrii Nakryiko
Now that BPF program/link management is centralized in generic net_device code, kernel code never queries program id from drivers, so XDP_QUERY_PROG/XDP_QUERY_PROG_HW commands are unnecessary. This patch removes all the implementations of those commands in kernel, along the xdp_attachment_query(). This patch was compile-tested on allyesconfig. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200722064603.3350758-10-andriin@fb.com
2020-07-10netdevsim: add UDP tunnel port offload supportJakub Kicinski
Add UDP tunnel port handlers to our fake driver so we can test the core infra. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30netdevsim: Add support for setting of packet trap group parametersIdo Schimmel
Add a dummy callback to set trap group parameters. Return an error when the 'fail_trap_group_set' debugfs file is set in order to exercise error paths and verify that error is propagated to user space when should. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30netdevsim: Add devlink-trap policer supportIdo Schimmel
Register three dummy packet trap policers with devlink and implement callbacks to change their parameters and read their counters. This will be used later on in the series to test the devlink-trap policer infrastructure. v2: * Remove check about burst size being a power of 2 and instead add a debugfs knob to fail the operation * Provide max/min rate/burst size when registering policers and remove the validity checks from nsim_dev_devlink_trap_policer_set() Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-25netdevsim: add ACL trap reporting cookie as a metadataJiri Pirko
Add new trap ACL which reports flow action cookie in a metadata. Allow used to setup the cookie using debugfs file. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-03netdevsim: fix panic in nsim_dev_take_snapshot_write()Taehee Yoo
nsim_dev_take_snapshot_write() uses nsim_dev and nsim_dev->dummy_region. So, during this function, these data shouldn't be removed. But there is no protecting stuff in this function. There are two similar cases. 1. reload case reload could be called during nsim_dev_take_snapshot_write(). When reload is being executed, nsim_dev_reload_down() is called and it calls nsim_dev_reload_destroy(). nsim_dev_reload_destroy() calls devlink_region_destroy() to destroy nsim_dev->dummy_region. So, during nsim_dev_take_snapshot_write(), nsim_dev->dummy_region() would be removed. At this point, snapshot_write() would access freed pointer. In order to fix this case, take_snapshot file will be removed before devlink_region_destroy(). The take_snapshot file will be re-created by ->reload_up(). 2. del_device_store case del_device_store() also could call nsim_dev_reload_destroy() during nsim_dev_take_snapshot_write(). If so, panic would occur. This problem is actually the same problem with the first case. So, this problem will be fixed by the first case's solution. Test commands: modprobe netdevsim while : do echo 1 > /sys/bus/netdevsim/new_device & echo 1 > /sys/bus/netdevsim/del_device & devlink dev reload netdevsim/netdevsim1 & echo 1 > /sys/kernel/debug/netdevsim/netdevsim1/take_snapshot & done Splat looks like: [ 45.564513][ T975] general protection fault, probably for non-canonical address 0xdffffc000000003a: 0000 [#1] SMP DEI [ 45.566131][ T975] KASAN: null-ptr-deref in range [0x00000000000001d0-0x00000000000001d7] [ 45.566135][ T975] CPU: 1 PID: 975 Comm: bash Not tainted 5.5.0+ #322 [ 45.569020][ T975] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 45.569026][ T975] RIP: 0010:__mutex_lock+0x10a/0x14b0 [ 45.570518][ T975] Code: 08 84 d2 0f 85 7f 12 00 00 44 8b 0d 10 23 65 02 45 85 c9 75 29 49 8d 7f 68 48 b8 00 00 00 0f [ 45.570522][ T975] RSP: 0018:ffff888046ccfbf0 EFLAGS: 00010206 [ 45.572305][ T975] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 45.572308][ T975] RDX: 000000000000003a RSI: ffffffffac926440 RDI: 00000000000001d0 [ 45.576843][ T975] RBP: ffff888046ccfd70 R08: ffffffffab610645 R09: 0000000000000000 [ 45.576847][ T975] R10: ffff888046ccfd90 R11: ffffed100d6360ad R12: 0000000000000000 [ 45.578471][ T975] R13: dffffc0000000000 R14: ffffffffae1976c0 R15: 0000000000000168 [ 45.578475][ T975] FS: 00007f614d6e7740(0000) GS:ffff88806c400000(0000) knlGS:0000000000000000 [ 45.581492][ T975] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 45.582942][ T975] CR2: 00005618677d1cf0 CR3: 000000005fb9c002 CR4: 00000000000606e0 [ 45.584543][ T975] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 45.586633][ T975] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 45.589889][ T975] Call Trace: [ 45.591445][ T975] ? devlink_region_snapshot_create+0x55/0x4a0 [ 45.601250][ T975] ? mutex_lock_io_nested+0x1380/0x1380 [ 45.602817][ T975] ? mutex_lock_io_nested+0x1380/0x1380 [ 45.603875][ T975] ? mark_held_locks+0xa5/0xe0 [ 45.604769][ T975] ? _raw_spin_unlock_irqrestore+0x2d/0x50 [ 45.606147][ T975] ? __mutex_unlock_slowpath+0xd0/0x670 [ 45.607723][ T975] ? crng_backtrack_protect+0x80/0x80 [ 45.613530][ T975] ? wait_for_completion+0x390/0x390 [ 45.615152][ T975] ? devlink_region_snapshot_create+0x55/0x4a0 [ 45.616834][ T975] devlink_region_snapshot_create+0x55/0x4a0 [ ... ] Fixes: 4418f862d675 ("netdevsim: implement support for devlink region and snapshots") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03netdevsim: disable devlink reload when resources are being usedTaehee Yoo
devlink reload destroys resources and allocates resources again. So, when devices and ports resources are being used, devlink reload function should not be executed. In order to avoid this race, a new lock is added and new_port() and del_port() call devlink_reload_disable() and devlink_reload_enable(). Thread0 Thread1 {new/del}_port() {new/del}_port() devlink_reload_disable() devlink_reload_disable() devlink_reload_enable() //here devlink_reload_enable() Before Thread1's devlink_reload_enable(), the devlink is already allowed to execute reload because Thread0 allows it. devlink reload disable/enable variable type is bool. So the above case would exist. So, disable/enable should be executed atomically. In order to do that, a new lock is used. Test commands: modprobe netdevsim echo 1 > /sys/bus/netdevsim/new_device while : do echo 1 > /sys/devices/netdevsim1/new_port & echo 1 > /sys/devices/netdevsim1/del_port & devlink dev reload netdevsim/netdevsim1 & done Splat looks like: [ 23.342145][ T932] DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock)) [ 23.342159][ T932] WARNING: CPU: 0 PID: 932 at kernel/locking/mutex-debug.c:103 mutex_destroy+0xc7/0xf0 [ 23.344182][ T932] Modules linked in: netdevsim openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_dx [ 23.346485][ T932] CPU: 0 PID: 932 Comm: devlink Not tainted 5.5.0+ #322 [ 23.347696][ T932] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 23.348893][ T932] RIP: 0010:mutex_destroy+0xc7/0xf0 [ 23.349505][ T932] Code: e0 07 83 c0 03 38 d0 7c 04 84 d2 75 2e 8b 05 00 ac b0 02 85 c0 75 8b 48 c7 c6 00 5e 07 96 40 [ 23.351887][ T932] RSP: 0018:ffff88806208f810 EFLAGS: 00010286 [ 23.353963][ T932] RAX: dffffc0000000008 RBX: ffff888067f6f2c0 RCX: ffffffff942c4bd4 [ 23.355222][ T932] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff96dac5b4 [ 23.356169][ T932] RBP: ffff888067f6f000 R08: fffffbfff2d235a5 R09: fffffbfff2d235a5 [ 23.357160][ T932] R10: 0000000000000001 R11: fffffbfff2d235a4 R12: ffff888067f6f208 [ 23.358288][ T932] R13: ffff88806208fa70 R14: ffff888067f6f000 R15: ffff888069ce3800 [ 23.359307][ T932] FS: 00007fe2a3876740(0000) GS:ffff88806c000000(0000) knlGS:0000000000000000 [ 23.360473][ T932] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.361319][ T932] CR2: 00005561357aa000 CR3: 000000005227a006 CR4: 00000000000606f0 [ 23.362323][ T932] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 23.363417][ T932] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 23.364414][ T932] Call Trace: [ 23.364828][ T932] nsim_dev_reload_destroy+0x77/0xb0 [netdevsim] [ 23.365655][ T932] nsim_dev_reload_down+0x84/0xb0 [netdevsim] [ 23.366433][ T932] devlink_reload+0xb1/0x350 [ 23.367010][ T932] genl_rcv_msg+0x580/0xe90 [ ...] [ 23.531729][ T1305] kernel BUG at lib/list_debug.c:53! [ 23.532523][ T1305] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 23.533467][ T1305] CPU: 2 PID: 1305 Comm: bash Tainted: G W 5.5.0+ #322 [ 23.534962][ T1305] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 23.536503][ T1305] RIP: 0010:__list_del_entry_valid+0xe6/0x150 [ 23.538346][ T1305] Code: 89 ea 48 c7 c7 00 73 1e 96 e8 df f7 4c ff 0f 0b 48 c7 c7 60 73 1e 96 e8 d1 f7 4c ff 0f 0b 44 [ 23.541068][ T1305] RSP: 0018:ffff888047c27b58 EFLAGS: 00010282 [ 23.542001][ T1305] RAX: 0000000000000054 RBX: ffff888067f6f318 RCX: 0000000000000000 [ 23.543051][ T1305] RDX: 0000000000000054 RSI: 0000000000000008 RDI: ffffed1008f84f61 [ 23.544072][ T1305] RBP: ffff88804aa0fca0 R08: ffffed100d940539 R09: ffffed100d940539 [ 23.545085][ T1305] R10: 0000000000000001 R11: ffffed100d940538 R12: ffff888047c27cb0 [ 23.546422][ T1305] R13: ffff88806208b840 R14: ffffffff981976c0 R15: ffff888067f6f2c0 [ 23.547406][ T1305] FS: 00007f76c0431740(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 23.548527][ T1305] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.549389][ T1305] CR2: 00007f5048f1a2f8 CR3: 000000004b310006 CR4: 00000000000606e0 [ 23.550636][ T1305] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 23.551578][ T1305] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 23.552597][ T1305] Call Trace: [ 23.553004][ T1305] mutex_remove_waiter+0x101/0x520 [ 23.553646][ T1305] __mutex_lock+0xac7/0x14b0 [ 23.554218][ T1305] ? nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.554908][ T1305] ? mutex_lock_io_nested+0x1380/0x1380 [ 23.555570][ T1305] ? _parse_integer+0xf0/0xf0 [ 23.556043][ T1305] ? kstrtouint+0x86/0x110 [ 23.556504][ T1305] ? nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.557133][ T1305] nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.558024][ T1305] del_port_store+0xcc/0xf0 [netdevsim] [ ... ] Fixes: 75ba029f3c07 ("netdevsim: implement proper devlink reload") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-03netdevsim: fix using uninitialized resourcesTaehee Yoo
When module is being initialized, __init() calls bus_register() and driver_register(). These functions internally create various resources and sysfs files. The sysfs files are used for basic operations(add/del device). /sys/bus/netdevsim/new_device /sys/bus/netdevsim/del_device These sysfs files use netdevsim resources, they are mostly allocated and initialized in ->probe() function, which is nsim_dev_probe(). But, sysfs files could be executed before ->probe() is finished. So, accessing uninitialized data would occur. Another problem is very similar. /sys/bus/netdevsim/new_device internally creates sysfs files. /sys/devices/netdevsim<id>/new_port /sys/devices/netdevsim<id>/del_port These sysfs files also use netdevsim resources, they are mostly allocated and initialized in creating device routine, which is nsim_bus_dev_new(). But they also could be executed before nsim_bus_dev_new() is finished. So, accessing uninitialized data would occur. To fix these problems, this patch adds flags, which means whether the operation is finished or not. The flag variable 'nsim_bus_enable' means whether netdevsim bus was initialized or not. This is protected by nsim_bus_dev_list_lock. The flag variable 'nsim_bus_dev->init' means whether nsim_bus_dev was initialized or not. This could be used in {new/del}_port_store() with no lock. Test commands: #SHELL1 modprobe netdevsim while : do echo "1 1" > /sys/bus/netdevsim/new_device echo "1 1" > /sys/bus/netdevsim/del_device done #SHELL2 while : do echo 1 > /sys/devices/netdevsim1/new_port echo 1 > /sys/devices/netdevsim1/del_port done Splat looks like: [ 47.508954][ T1008] general protection fault, probably for non-canonical address 0xdffffc0000000021: 0000 I [ 47.510793][ T1008] KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] [ 47.511963][ T1008] CPU: 2 PID: 1008 Comm: bash Not tainted 5.5.0+ #322 [ 47.512823][ T1008] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 47.514041][ T1008] RIP: 0010:__mutex_lock+0x10a/0x14b0 [ 47.514699][ T1008] Code: 08 84 d2 0f 85 7f 12 00 00 44 8b 0d 10 23 65 02 45 85 c9 75 29 49 8d 7f 68 48 b8 00 00 00 0f [ 47.517163][ T1008] RSP: 0018:ffff888059b4fbb0 EFLAGS: 00010206 [ 47.517802][ T1008] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 47.518941][ T1008] RDX: 0000000000000021 RSI: ffffffff85926440 RDI: 0000000000000108 [ 47.519732][ T1008] RBP: ffff888059b4fd30 R08: ffffffffc073fad0 R09: 0000000000000000 [ 47.520729][ T1008] R10: ffff888059b4fd50 R11: ffff88804bb38040 R12: 0000000000000000 [ 47.521702][ T1008] R13: dffffc0000000000 R14: ffffffff871976c0 R15: 00000000000000a0 [ 47.522760][ T1008] FS: 00007fd4be05a740(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 47.523877][ T1008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 47.524627][ T1008] CR2: 0000561c82b69cf0 CR3: 0000000065dd6004 CR4: 00000000000606e0 [ 47.527662][ T1008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 47.528604][ T1008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 47.529531][ T1008] Call Trace: [ 47.529874][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.530470][ T1008] ? mutex_lock_io_nested+0x1380/0x1380 [ 47.531018][ T1008] ? _kstrtoull+0x76/0x160 [ 47.531449][ T1008] ? _parse_integer+0xf0/0xf0 [ 47.531874][ T1008] ? kernfs_fop_write+0x1cf/0x410 [ 47.532330][ T1008] ? sysfs_file_ops+0x160/0x160 [ 47.532773][ T1008] ? kstrtouint+0x86/0x110 [ 47.533168][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.533721][ T1008] nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.534336][ T1008] ? sysfs_file_ops+0x160/0x160 [ 47.534858][ T1008] new_port_store+0x99/0xb0 [netdevsim] [ 47.535439][ T1008] ? del_port_store+0xb0/0xb0 [netdevsim] [ 47.536035][ T1008] ? sysfs_file_ops+0x112/0x160 [ 47.536544][ T1008] ? sysfs_kf_write+0x3b/0x180 [ 47.537029][ T1008] kernfs_fop_write+0x276/0x410 [ 47.537548][ T1008] ? __sb_start_write+0x215/0x2e0 [ 47.538110][ T1008] vfs_write+0x197/0x4a0 [ ... ] Fixes: f9d9db47d3ba ("netdevsim: add bus attributes to add new and delete devices") Fixes: 794b2c05ca1c ("netdevsim: extend device attrs to support port addition and deletion") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2019-10-11netdevsim: implement couple of testing devlink health reportersJiri Pirko
Implement "empty" and "dummy" reporters. The first one is really simple and does nothing. The other one has debugfs files to trigger breakage and it is able to do recovery. The ops also implement dummy fmsg content. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-06netdevsim: add couple of debugfs bools to debug devlink reloadJiri Pirko
Add flag to disallow reload and another one that causes reload to always fail. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-05netdevsim: create devlink and netdev instances in namespaceJiri Pirko
When user does create new netdevsim instance using sysfs bus file, create the devlink instance and related netdev instance in the namespace of the caller. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04netdevsim: register port netdevices into net of deviceJiri Pirko
Register newly created port netdevice into net namespace that the parent device belongs to. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04netdevsim: implement proper devlink reloadJiri Pirko
During devlink reload, all driver objects should be reinstantiated with the exception of devlink instance and devlink resources and params. Move existing devlink_resource_size_get() calls into fib_create() just before fib notifier is registered. Also, make sure that extack is propagated down to fib_notifier_register() call. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04netdevsim: change fib accounting and limitations to be per-deviceJiri Pirko
Currently, the accounting is done per-namespace. However, devlink instance is always in init_net namespace for now, so only the accounting related to init_net is used. Limitations set using devlink resources are only considered for init_net. nsim_devlink_net() always returns init_net always. Make the accounting per-device. This brings no functional change. Per-device accounting has the same values as per-net. For a single netdevsim instance, the behaviour is exactly the same as before. When multiple netdevsim instances are created, each can have different limits. This is in prepare to implement proper devlink netns support. After that, the devlink instance which would exist in particular netns would account and limit that netns. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Merge conflict of mlx5 resolved using instructions in merge commit 9566e650bf7fdf58384bb06df634f7531ca3a97e. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17netdevsim: Add devlink-trap supportIdo Schimmel
Have netdevsim register its trap groups and traps with devlink during initialization and periodically report trapped packets to devlink core. Since netdevsim is not a real device, the trapped packets are emulated using a workqueue that periodically reports a UDP packet with a random 5-tuple from each active packet trap and from each running netdev. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-15netdevsim: implement support for devlink region and snapshotsJiri Pirko
Implement dummy region of size 32K and allow user to create snapshots or random data using debugfs file trigger. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-11netdevsim: register couple of devlink paramsJiri Pirko
Register couple of devlink params, one generic, one driver-specific. Make the values available over debugfs. Example: $ echo "111" > /sys/bus/netdevsim/new_device $ devlink dev param netdevsim/netdevsim111: name max_macs type generic values: cmode driverinit value 32 name test1 type driver-specific values: cmode driverinit value true $ cat /sys/kernel/debug/netdevsim/netdevsim111/max_macs 32 $ cat /sys/kernel/debug/netdevsim/netdevsim111/test1 Y $ devlink dev param set netdevsim/netdevsim111 name max_macs cmode driverinit value 16 $ devlink dev param set netdevsim/netdevsim111 name test1 cmode driverinit value false $ devlink dev reload netdevsim/netdevsim111 $ cat /sys/kernel/debug/netdevsim/netdevsim111/max_macs 16 $ cat /sys/kernel/debug/netdevsim/netdevsim111/test1 Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-11netdevsim: Restore per-network namespace accounting for fib entriesDavid Ahern
Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc494225c1e ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-04netdevsim: implement fake flash updating with notificationsJiri Pirko
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26netdevsim: move netdev creation/destruction to dev probeJiri Pirko
Remove the existing way to create netdevsim over rtnetlink and move the netdev creation/destruction to dev probe, so for every probed port, a netdevsim-netdev instance is created. Adjust selftests to work with new interface. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26netdevsim: extend device attrs to support port addition and deletionJiri Pirko
In order to test flows in core, it is beneficial to maintain previously supported possibility to add and delete ports during netdevsim lifetime. Do it by extending device sysfs attrs by "new_port" and "del_port". Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26netdevsim: implement dev probe/remove skeleton with port initializationJiri Pirko
Implement netdevsim bus probing of netdevsim devices. For every probed device create a devlink instance. According to the user-passed value, create a number of ports represented by devlink port instances. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26netdevsim: change debugfs tree topologyJiri Pirko
With the model where dev is represented by devlink and ports are represented by devlink ports, make debugfs file names independent on netdev names. Change the topology to the one illustrated by the following example: $ ls /sys/kernel/debug/netdevsim/ netdevsim1 $ ls /sys/kernel/debug/netdevsim/netdevsim1/ bpf_bind_accept bpf_bind_verifier_delay bpf_bound_progs ports $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/ 0 1 $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/0/ bpf_map_accept bpf_offloaded_id bpf_tc_accept bpf_tc_non_bound_accept bpf_xdpdrv_accept bpf_xdpoffload_accept dev ipsec $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/0/dev -l lrwxrwxrwx 1 root root 0 Apr 13 15:58 /sys/kernel/debug/netdevsim/netdevsim1/ports/0/dev -> ../../../netdevsim1 Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26netdevsim: generate random switch id instead of using dev idJiri Pirko
Current implementation of parent_id/switch_id does not follow the original idea of being unique. The values are "0", "1", etc. Instead of that, generate 32 random bytes. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26netdevsim: merge sdev into devJiri Pirko
As previously introduce dev which is mapped 1:1 to a bus device covers the purpose of the original shared device, merge the sdev code into dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26netdevsim: rename dev_init/exit() functions and make them independent on nsJiri Pirko
These functions are going to be called from bus probe/release(), therefore make them independent on ns struct and rename accordingly. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26netdevsim: add bus attributes to add new and delete devicesJiri Pirko
Add a way to add new netdevsim device on netdevsim bus and also to delete existing netdevsim device from the bus. Track the bus devices in using a list. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26netdevsim: move device registration and related code to bus.cJiri Pirko
Move netdevsim device registration into bus.c and alongside with that the related sysfs attributes. Introduce new struct nsim_bus_dev to represent a netdevsim device on netdevsim bus. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26netdevsim: put netdevsim bus code into separate fileJiri Pirko
As the code related to netdevsim bus is going to get bigger, move the existing code to a separate file. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26netdevsim: rename devlink.c to dev.c to contain per-dev(asic) itemsJiri Pirko
The existing devlink.c code is going to be extended to represent asic device on a bus. As this is about more than just devlink, rename the file. Do appropriate prefix renaming alongside with that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26netdevsim: create devlink instance per netdevsim instanceJiri Pirko
Currently there is one devlink instance created per network namespace. That is quite odd considering the fact that devlink instance should represent an ASIC. The following patches are going to move the devlink instance even more down to a bus device, but until then, have one devlink instance per netdevsim instance. Struct nsim_devlink is introduced to hold fib setting. The changes in the fib code are only related to holding the configuration per devlink instance instead of network namespace. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12netdevsim: move sdev specific bpf debugfs files to sdev dirJiri Pirko
Some netdevsim bpf debugfs files are per-sdev, yet they are defined per netdevsim instance. Move them under sdev directory. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12netdevsim: move shared dev creation and destruction into separate fileJiri Pirko
To make code easier to read, move shared dev bits into a separate file. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09netdevsim: assume CONFIG_NET_DEVLINK is always enabledJiri Pirko
Since commit f6b19b354d50 ("net: devlink: select NET_DEVLINK from drivers") adds implicit select of NET_DEVLINK for netdevsim, the code does not have to deal with the case when CONFIG_NET_DEVLINK is not enabled. So remove the ifcase. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-26netdevsim: make debug dirs' dentries staticJakub Kicinski
The root directories of netdevsim should only be used by the core to create per-device subdirectories, so limit their visibility to the core file. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18bpf: offload: keep the offload state per-ASICJakub Kicinski
Create a higher-level entity to represent a device/ASIC to allow programs and maps to be shared between device ports. The extra work is required to make sure we don't destroy BPF objects as soon as the netdev for which they were loaded gets destroyed, as other ports may still be using them. When netdev goes away all of its BPF objects will be moved to other netdevs of the device, and only destroyed when last netdev is unregistered. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-18netdevsim: associate bound programs with shared devJakub Kicinski
Move bound program information from netdevsim to shared sub-object, as programs will soon be shared between netdevs of the same ASIC. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-18netdevsim: add shared netdevsim devicesJakub Kicinski
Factor out sharable netdevsim sub-object and use IFLA_LINK to link netdevsims together at creation time. Sharable object will have its own DebugFS directory. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-18netdevsim: add switch_id attributeJakub Kicinski
Grouping netdevsim devices into "ASICs" will soon be supported. Add switch_id attribute to all netdevsims. For now each netdevsim will have its switch_id matching the device id. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-13netdevsim: add support for simultaneous driver and hw XDPJakub Kicinski
Allow netdevsim to accept driver and offload attachment of XDP BPF programs at the same time. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-13xdp: factor out common program/flags handling from driversJakub Kicinski
Basic operations drivers perform during xdp setup and query can be moved to helpers in the core. Encapsulate program and flags into a structure and add helpers. Note that the structure is intended as the "main" program information source in the driver. Most drivers will additionally place the program pointer in their fast path or ring structures. The helpers don't have a huge impact now, but they will decrease the code duplication when programs can be installed in HW and driver at the same time. Encapsulating the basic operations in helpers will hopefully also reduce the number of changes to drivers which adopt them. Helpers could really be static inline, but they depend on definition of struct netdev_bpf which means they'd have to be placed in netdevice.h, an already 4500 line header. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-28netdevsim: add ipsec offload testingShannon Nelson
Implement the IPsec/XFRM offload API for testing. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-05netdevsim: Add extack error message for devlink reloadDavid Ahern
devlink reset command can fail if a FIB resource limit is set to a value lower than the current occupancy. Return a proper message indicating the reason for the failure. $ devlink resource sh netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none resources: name fib size unlimited occ 43 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name fib-rules size unlimited occ 4 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name IPv6 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none resources: name fib size unlimited occ 54 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none name fib-rules size unlimited occ 3 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables none $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 40 $ devlink dev reload netdevsim/netdevsim0 Error: netdevsim: New size is less than current occupancy. devlink answers: Invalid argument Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-31netdevsim: Change nsim_devlink_setup to return error to callerDavid Ahern
Change nsim_devlink_setup to return any error back to the caller and update nsim_init to handle it. Requested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29netdevsim: Add simple FIB resource controller via devlinkDavid Ahern
Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 01:16:41 +0000