| Age | Commit message (Collapse) | Author |
|---|
|
Rename the SDM845 configuration data file so that its name is
derived from its IPA version. I am not aware of any special IPA
behavior or handling that would be based on a specific SoC (as
opposed to a specific version of the IPA it contains).
Update a few other references to the code that talk about the SDM845
rather than just IPA v3.5.1.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We don't typically need much information about modem endpoints.
Normally we need to specify information about modem endpoints in
configuration data in only two cases:
- When a modem TX endpoint supports filtering
- When another endpoint's configuration refers to it
For the first case, the AP initializes the filter table, and must
know how many endpoints (AP and modem) support filtering. An
example of the second case is the AP->modem TX endpoint, which
defines the modem<-AP RX endpoint as its status endpoint.
There is one exception to this, and it's due to a hardware quirk.
For IPA v4.2 (only) there is a problem related to allocating GSI
channels. And to work around this, the AP allocates *all* GSI
channels at startup time--including those used by the modem.
Get rid of the configuration information for two endpoints not
required for the SDM845. SC7180 runs IPA v4.2, so we can't
eliminate any modem endpoint definitions there.
Two more minor changes:
- Reorder the members defined for the ipa_endpoint_name enumerated
type to match the order used in configuration data files when
defining endpoints.
- Add a new name, IPA_ENDPOINT_MODEM_DL_NLO_TX, which can be used
for IPA v4.5+.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The backward compatibility register value is a platform-specific
property that is not stored in the platform data. Create a data
field where this can be represented, and get rid ipa_reg_bcr_val().
This register is not present starting with IPA v4.5.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The arrays of source and destination resource limits defined in
configuration data are of a fixed size--which is the maximum number
of resource groups supported for any platform. Most platforms will
use fewer than that many groups.
Add new members to the ipa_rsrc_group_id enumerated type to define
the number of source and destination resource groups are defined for
the platform. (This type is defined for each platform in its data
file.)
Add a new field to the resource configuration data that indicates
how many of the source and destination resource groups are actually
used for the platform, and initialize it with the count value. This
allows us to determine the number of groups defined for the platform
without exposing the ipa_rsrc_group_id enumerated type.
As a result, we no longer need ipa_resource_group_src_count()
and ipa_resource_group_dst_count(), because each platform now
defines its supported number of resource groups. So get rid of
those two functions.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ipa_resource_src and ipa_resource_dst structures are identical
in form, so just replace them with a single structure.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Most platforms have the same set of source and destination resource
types. But some older platforms have some additional ones, and it's
possible different resources will be used in the future.
Move the definition of the ipa_resource_type enumerated type so it
is defined for each platform in its configuration data file. This
permits each to have a distinct set of resources.
Shorten the data files slightly, by putting the min and max limit
values on the same line.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove the type field from the ipa_resource_src and ipa_resource_dst
structures, and instead use that value as the index into the arrays
of source and destination resources.
Change ipa_resource_config_src() and ipa_resource_config_dst() so
the resource type is passed in as an argument.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, the SDM845 configuration data defines resource limits for
the first two resource groups (for both source and destination
resource types). The hardware supports additional resource groups,
and we should program the resource limits for those groups as well.
Even the "unused" destination resource group (number 2) should have
non-zero limits programmed in some cases, to ensure correct operation.
Add these missing resource group limit definitions to the SDM845
configuration data.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Define a new ipa_resource_group_id enumerated type, whose members
have numeric values that match the resource group number used when
programming the hardware. Each platform supports a different number
of source and destination resource groups, so define the type
separately for each platform in its configuration data file.
Use these new symbolic values when specifying the resource group an
endpoint is associated with. And use them to index the limits
arrays for source and destination resources, making it clearer how
these values are used.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We only program the sequencer type for TX endpoints. So move the
definition of the sequencer type fields into the TX-specific portion
of the endpoint configuration data. There's no need to maintain
this in the IPA structure; we can extract it from the configuration
data it points to in the one spot it's needed.
We previously specified the sequencer type for RX endpoints with
INVALID values. These are no longer needed, so get rid of them.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
An IPA endpoint has a sequencer that must be configured based on how
the endpoint is to be used. Currently the IPA code programs the
sequencer type by splitting a value into four 4-bit nibbles. Doing
that doesn't really add much value, and regardless, a better way of
splitting the sequencer type is into two halves--the lower byte
describing how normal packet processing is handled, and the next
byte describing information about processing replicas.
So split the sequencer type into two sub-parts: the sequencer type
and the replication sequencer type. Define the values supported for
the "main" sequencer type, and define the values supported for the
replication part separately.
In addition, the sequencer type names are quite verbose, encoding
what the type includes, but also what it *excludes*. Rename the
sequencer types in a way that mainly describes the number of passes
that a packet takes through the IPA processing pipeline, and how
many of those passes end by supplying the processed packet to the
microprocessor.
The result expands the supported types beyond what is required for
now, but simplifies the way these are defined.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Define the maximum number of reads and writes to configure for the
QSB masters used for IPA in configuration data.
We don't use these values yet; the next commit takes care of that.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The AP_HEADER memory region for both the SDM845 and SC7180 SoCs has
zero size, and has no canaries. Defining an offset for such a
zero-length region is not meaningful, so it's better not to define
it at all. The size of this region is used in the code, but its
value will still be zero because the memory regions are defined in
statically initialized memory.
For the SC7180, the STATS_DROP memory region has a zero size and no
canaries as well.
These regions are the only place where a zero-sized region is
defined despite having no canaries. Remove them.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All of the platform configuration data should be constant, but
that isn't the case for the memory regions, interconnects, and
clocks. Fix this.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently we assume that the IPA hardware has exactly three
interconnects. But that won't be guaranteed for all platforms,
so allow any number of interconnects to be specified in the
configuration data.
For each platform, define an array of interconnect data entries
(still associated with the IPA clock structure), and record the
number of entries initialized in that array.
Loop over all entries in this array when initializing, enabling,
disabling, or tearing down the set of interconnects.
With this change we no longer need the ipa_interconnect_id
enumerated type, so get rid of it.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the name to the configuration data for each interconnect. Use
this information rather than a constant string during initialization.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use "bandwidth" rather than "rate" in describing the average and
peak values to use for IPA interconnects. They should have been
named that way to begin with.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Populate the core clock rate and interconnect average and peak
bandwidth data for SDM845 and SC7180 in their configuration data
files. At this point we still don't *use* this data.
Note that SC7180 actually defines a new core clock rate (100 MHz
instead of 75 MHz) and new interconnect bandwidth values. They
will be activated in the next commit, which uses the configured
values rather than the fixed constants.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I have discovered that the maximum number of source packet contexts
configured for SDM845 is incorrect. Fix this error.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The IPA hardware manages various resources (e.g. descriptors)
internally to perform its functions. The resources are grouped,
allowing different endpoints to use separate resource pools. This
way one group of endpoints can be configured to operate unaffected
by the resource use of endpoints in a different group.
Endpoints should be assigned to a resource group, but we currently
don't do that.
Define a new resource_group field in the endpoint configuration
data, and use it to assign the proper resource group to use for
each AP endpoint.
Tested-by: Sujit Kautkar <sujitka@chromium.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The AP LAN RX endpoint should not have download checksum offload
enabled.
The receive handler does properly accommodate the trailer that's
added by the hardware, but we ignore it.
Fixes: 1ed7d0c0fdba ("soc: qcom: ipa: configuration data")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A "delay mode" feature was put in place to work around a problem
that was observed during development of the upstream IPA driver. It
used TX endpoint "delay mode" in order to prevent transmitting
packets toward the modem before it was ready.
A race condition that would explain the problem has long since been
fixed, and we have concluded that the "delay mode" feature is no
longer required. So get rid of it.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Arrange to use an item from SMEM memory for IPA. SMEM item number
497 is designated to be used by the IPA. Specify the item ID and
size of the region in platform configuration data. Allocate and get
a pointer to this region from ipa_mem_init(). The memory must be
mapped for access through an SMMU.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Define a region of IMEM memory available for use by IPA in the
platform configuration data. Initialize it from ipa_mem_init().
The memory must be mapped for access through an SMMU.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ipa_mem_data structure type was never actually used. Instead,
the IPA memory regions were defined using the ipa_mem structure.
Redefine struct ipa_mem_data so it encapsulates the array of IPA-local
memory region descriptors along with the count of entries in that
array. Pass just an ipa_mem structure pointer to ipa_mem_init().
Rename the ipa_mem_data[] array ipa_mem_local_data[] to emphasize
that the memory regions it defines are IPA-local memory.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch defines configuration data that is used to specify some
of the details of IPA hardware supported by the driver. It is built
as Device Tree match data, discovered at boot time. The driver
supports the Qualcomm SDM845 SoC. Data for the Qualcomm SC7180 is
also defined here, but it is not yet completely supported.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
