summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/sfc/mcdi_port_common.c
AgeCommit message (Collapse)Author
2025-03-25sfc: rip out MDIO supportEdward Cree
Unlike Siena, no EF10 board ever had an external PHY, and consequently MDIO handling isn't even built into the firmware. Since Siena has been split out into its own driver, the MDIO code can be deleted from the sfc driver. Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://patch.msgid.link/aa689d192ddaef7abe82709316c2be648a7bd66e.1742493017.git.ecree.xilinx@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-28sfc: Filter cleanups for Falcon and SienaMartin Habets
unicast_filter and multicast_hash are no longer needed. Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-01sfc: Fix module EEPROM reporting for QSFP modulesAndy Moreton
The sfc driver does not report QSFP module EEPROM contents correctly as only the first page is fetched from hardware. Commit 0e1a2a3e6e7d ("ethtool: Add SFF-8436 and SFF-8636 max EEPROM length definitions") added ETH_MODULE_SFF_8436_MAX_LEN for the overall size of the EEPROM info, so use that to report the full EEPROM contents. Fixes: 9b17010da57a ("sfc: Add ethtool -m support for QSFP modules") Signed-off-by: Andy Moreton <andy.moreton@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-04ethernet/sfc: remove redundant rc variableMinghao Chi
Return value from efx_mcdi_rpc() directly instead of taking this in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: CGEL ZTE <cgel.zte@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21sfc: Export fibre-specific supported link modesErik Ekman
The 1/10GbaseT modes were set up for cards with SFP+ cages in 3497ed8c852a5 ("sfc: report supported link speeds on SFP connections"). 10GbaseT was likely used since no 10G fibre mode existed. The missing fibre modes for 1/10G were added to ethtool.h in 5711a9822144 ("net: ethtool: add support for 1000BaseX and missing 10G link modes") shortly thereafter. The user guide available at https://support-nic.xilinx.com/wp/drivers lists support for the following cable and transceiver types in section 2.9: - QSFP28 100G Direct Attach Cables - QSFP28 100G SR Optical Transceivers (with SR4 modules listed) - SFP28 25G Direct Attach Cables - SFP28 25G SR Optical Transceivers - QSFP+ 40G Direct Attach Cables - QSFP+ 40G Active Optical Cables - QSFP+ 40G SR4 Optical Transceivers - QSFP+ to SFP+ Breakout Direct Attach Cables - QSFP+ to SFP+ Breakout Active Optical Cables - SFP+ 10G Direct Attach Cables - SFP+ 10G SR Optical Transceivers - SFP+ 10G LR Optical Transceivers - SFP 1000BASE‐T Transceivers - 1G Optical Transceivers (From user guide issue 28. Issue 16 which also includes older cards like SFN5xxx/SFN6xxx has matching lists for 1/10/40G transceiver types.) Regarding SFP+ 10GBASE‐T transceivers the latest guide says: "Solarflare adapters do not support 10GBASE‐T transceiver modules." Tested using SFN5122F-R7 (with 2 SFP+ ports). Supported link modes do not change depending on module used (tested with 1000BASE-T, 1000BASE-BX10, 10GBASE-LR). Before: $ ethtool ext Settings for ext: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full 10000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Link partner advertised link modes: Not reported Link partner advertised pause frame use: No Link partner advertised auto-negotiation: No Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Auto-negotiation: off Port: FIBRE PHYAD: 255 Transceiver: internal Current message level: 0x000020f7 (8439) drv probe link ifdown ifup rx_err tx_err hw Link detected: yes After: $ ethtool ext Settings for ext: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full 1000baseX/Full 10000baseCR/Full 10000baseSR/Full 10000baseLR/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Link partner advertised link modes: Not reported Link partner advertised pause frame use: No Link partner advertised auto-negotiation: No Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Auto-negotiation: off Port: FIBRE PHYAD: 255 Transceiver: internal Supports Wake-on: g Wake-on: d Current message level: 0x000020f7 (8439) drv probe link ifdown ifup rx_err tx_err hw Link detected: yes Signed-off-by: Erik Ekman <erik@kryo.se> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-08sfc: coding style cleanups in mcdi_port_common.cEdward Cree
The code recently moved into this file contained a number of coding style issues, about which checkpatch and xmastree complained. Fix them. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-07sfc: handle limited FEC supportEdward Cree
If the reported PHY capabilities do not include a given FEC mode, don't attempt to select that FEC mode anyway. If the user tries to set a mode through ethtool that is not supported, return an error. The _REQUESTED bits don't appear in the supported caps, but are implied by the corresponding FEC bits. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-07sfc: remove phy_op indirectionEdward Cree
Originally there were several implementations of PHY operations for the several different PHYs used on Falcon boards. But Falcon is now in a separate driver, and all sfc NICs since then have had MCDI-managed PHYs. Thus, there is no need to indirect through function pointers in efx->phy_op; we can simply call the efx_mcdi_phy_* functions directly. This also hooks up these functions for EF100, which was previously using the dummy_phy_ops. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-06-30sfc: commonise some MAC configuration codeEdward Cree
Refactor it a little as we go, and introduce efx_mcdi_set_mtu() which we will later use for ef100 to change MTU without touching other MAC settings. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-30sfc: commonise MCDI MAC stats handlingEdward Cree
Most of it was already declared in mcdi_port_common.h, so just move the implementations to mcdi_port_common.c. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10sfc: move a couple more functionsAlex Maftei (amaftei)
Signed-off-by: Alexandru-Mihai Maftei <amaftei@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10sfc: move various functionsAlex Maftei (amaftei)
Signed-off-by: Alexandru-Mihai Maftei <amaftei@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-09sfc: move more MCDI port codeAlex Maftei (amaftei)
Various functions dealing with flow control, forward error correction, polling, port number, and PHY testing. Signed-off-by: Alexandru-Mihai Maftei <amaftei@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-09sfc: move some MCDI port utility functionsAlex Maftei (amaftei)
They just convert between different sets of flags/registers. Some block comments were adjusted. Signed-off-by: Alexandru-Mihai Maftei <amaftei@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-09sfc: move some port link state/caps codeAlex Maftei (amaftei)
The moved code handles MCDI port link state and capabilities. Signed-off-by: Alexandru-Mihai Maftei <amaftei@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 18:27:04 +0000