summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/qlogic/qlcnic
AgeCommit message (Collapse)Author
4 daysMerge tag 'net-next-6.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Wrap datapath globals into net_aligned_data, to avoid false sharing - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container) - Add SO_INQ and SCM_INQ support to AF_UNIX - Add SIOCINQ support to AF_VSOCK - Add TCP_MAXSEG sockopt to MPTCP - Add IPv6 force_forwarding sysctl to enable forwarding per interface - Make TCP validation of whether packet fully fits in the receive window and the rcv_buf more strict. With increased use of HW aggregation a single "packet" can be multiple 100s of kB - Add MSG_MORE flag to optimize large TCP transmissions via sockmap, improves latency up to 33% for sockmap users - Convert TCP send queue handling from tasklet to BH workque - Improve BPF iteration over TCP sockets to see each socket exactly once - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code - Support enabling kernel threads for NAPI processing on per-NAPI instance basis rather than a whole device. Fully stop the kernel NAPI thread when threaded NAPI gets disabled. Previously thread would stick around until ifdown due to tricky synchronization - Allow multicast routing to take effect on locally-generated packets - Add output interface argument for End.X in segment routing - MCTP: add support for gateway routing, improve bind() handling - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink - Add a new neighbor flag ("extern_valid"), which cedes refresh responsibilities to userspace. This is needed for EVPN multi-homing where a neighbor entry for a multi-homed host needs to be synced across all the VTEPs among which the host is multi-homed - Support NUD_PERMANENT for proxy neighbor entries - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM - Add sequence numbers to netconsole messages. Unregister netconsole's console when all net targets are removed. Code refactoring. Add a number of selftests - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol should be used for an inbound SA lookup - Support inspecting ref_tracker state via DebugFS - Don't force bonding advertisement frames tx to ~333 ms boundaries. Add broadcast_neighbor option to send ARP/ND on all bonded links - Allow providing upcall pid for the 'execute' command in openvswitch - Remove DCCP support from Netfilter's conntrack - Disallow multiple packet duplications in the queuing layer - Prevent use of deprecated iptables code on PREEMPT_RT Driver API: - Support RSS and hashing configuration over ethtool Netlink - Add dedicated ethtool callbacks for getting and setting hashing fields - Add support for power budget evaluation strategy in PSE / Power-over-Ethernet. Generate Netlink events for overcurrent etc - Support DPLL phase offset monitoring across all device inputs. Support providing clock reference and SYNC over separate DPLL inputs - Support traffic classes in devlink rate API for bandwidth management - Remove rtnl_lock dependency from UDP tunnel port configuration Device drivers: - Add a new Broadcom driver for 800G Ethernet (bnge) - Add a standalone driver for Microchip ZL3073x DPLL - Remove IBM's NETIUCV device driver - Ethernet high-speed NICs: - Broadcom (bnxt): - support zero-copy Tx of DMABUF memory - take page size into account for page pool recycling rings - Intel (100G, ice, idpf): - idpf: XDP and AF_XDP support preparations - idpf: add flow steering - add link_down_events statistic - clean up the TSPLL code - preparations for live VM migration - nVidia/Mellanox: - support zero-copy Rx/Tx interfaces (DMABUF and io_uring) - optimize context memory usage for matchers - expose serial numbers in devlink info - support PCIe congestion metrics - Meta (fbnic): - add 25G, 50G, and 100G link modes to phylink - support dumping FW logs - Marvell/Cavium: - support for CN20K generation of the Octeon chips - Amazon: - add HW clock (without timestamping, just hypervisor time access) - Ethernet virtual: - VirtIO net: - support segmentation of UDP-tunnel-encapsulated packets - Google (gve): - support packet timestamping and clock synchronization - Microsoft vNIC: - add handler for device-originated servicing events - allow dynamic MSI-X vector allocation - support Tx bandwidth clamping - Ethernet NICs consumer, and embedded: - AMD: - amd-xgbe: hardware timestamping and PTP clock support - Broadcom integrated MACs (bcmgenet, bcmasp): - use napi_complete_done() return value to support NAPI polling - add support for re-starting auto-negotiation - Broadcom switches (b53): - support BCM5325 switches - add bcm63xx EPHY power control - Synopsys (stmmac): - lots of code refactoring and cleanups - TI: - icssg-prueth: read firmware-names from device tree - icssg: PRP offload support - Microchip: - lan78xx: convert to PHYLINK for improved PHY and MAC management - ksz: add KSZ8463 switch support - Intel: - support similar queue priority scheme in multi-queue and time-sensitive networking (taprio) - support packet pre-emption in both - RealTek (r8169): - enable EEE at 5Gbps on RTL8126 - Airoha: - add PPPoE offload support - MDIO bus controller for Airoha AN7583 - Ethernet PHYs: - support for the IPQ5018 internal GE PHY - micrel KSZ9477 switch-integrated PHYs: - add MDI/MDI-X control support - add RX error counters - add cable test support - add Signal Quality Indicator (SQI) reporting - dp83tg720: improve reset handling and reduce link recovery time - support bcm54811 (and its MII-Lite interface type) - air_en8811h: support resume/suspend - support PHY counters for QCA807x and QCA808x - support WoL for QCA807x - CAN drivers: - rcar_canfd: support for Transceiver Delay Compensation - kvaser: report FW versions via devlink dev info - WiFi: - extended regulatory info support (6 GHz) - add statistics and beacon monitor for Multi-Link Operation (MLO) - support S1G aggregation, improve S1G support - add Radio Measurement action fields - support per-radio RTS threshold - some work around how FIPS affects wifi, which was wrong (RC4 is used by TKIP, not only WEP) - improvements for unsolicited probe response handling - WiFi drivers: - RealTek (rtw88): - IBSS mode for SDIO devices - RealTek (rtw89): - BT coexistence for MLO/WiFi7 - concurrent station + P2P support - support for USB devices RTL8851BU/RTL8852BU - Intel (iwlwifi): - use embedded PNVM in (to be released) FW images to fix compatibility issues - many cleanups (unused FW APIs, PCIe code, WoWLAN) - some FIPS interoperability - MediaTek (mt76): - firmware recovery improvements - more MLO work - Qualcomm/Atheros (ath12k): - fix scan on multi-radio devices - more EHT/Wi-Fi 7 features - encapsulation/decapsulation offload - Broadcom (brcm80211): - support SDIO 43751 device - Bluetooth: - hci_event: add support for handling LE BIG Sync Lost event - ISO: add socket option to report packet seqnum via CMSG - ISO: support SCM_TIMESTAMPING for ISO TS - Bluetooth drivers: - intel_pcie: support Function Level Reset - nxpuart: add support for 4M baudrate - nxpuart: implement powerup sequence, reset, FW dump, and FW loading" * tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits) dpll: zl3073x: Fix build failure selftests: bpf: fix legacy netfilter options ipv6: annotate data-races around rt->fib6_nsiblings ipv6: fix possible infinite loop in fib6_info_uses_dev() ipv6: prevent infinite loop in rt6_nlmsg_size() ipv6: add a retry logic in net6_rt_notify() vrf: Drop existing dst reference in vrf_ip6_input_dst net/sched: taprio: align entry index attr validation with mqprio net: fsl_pq_mdio: use dev_err_probe selftests: rtnetlink.sh: remove esp4_offload after test vsock: remove unnecessary null check in vsock_getname() igb: xsk: solve negative overflow of nb_pkts in zerocopy mode stmmac: xsk: fix negative overflow of budget in zerocopy mode dt-bindings: ieee802154: Convert at86rf230.txt yaml format net: dsa: microchip: Disable PTP function of KSZ8463 net: dsa: microchip: Setup fiber ports for KSZ8463 net: dsa: microchip: Write switch MAC address differently for KSZ8463 net: dsa: microchip: Use different registers for KSZ8463 net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver dt-bindings: net: dsa: microchip: Add KSZ8463 switch support ...
9 daysnet: Fix typosBjorn Helgaas
Fix typos in comments and error messages. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: David Arinzon <darinzon@amazon.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250723201528.2908218-1-helgaas@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18udp_tunnel: remove rtnl_lock dependencyStanislav Fomichev
Drivers that are using ops lock and don't depend on RTNL lock still need to manage it because udp_tunnel's RTNL dependency. Introduce new udp_tunnel_nic_lock and use it instead of rtnl_lock. Drop non-UDP_TUNNEL_NIC_INFO_MAY_SLEEP mode from udp_tunnel infra (udp_tunnel_nic_device_sync_work needs to grab udp_tunnel_nic_lock mutex and might sleep). Cover more places in v4: - netlink - udp_tunnel_notify_add_rx_port (ndo_open) - triggers udp_tunnel_nic_device_sync_work - udp_tunnel_notify_del_rx_port (ndo_stop) - triggers udp_tunnel_nic_device_sync_work - udp_tunnel_get_rx_info (__netdev_update_features) - triggers NETDEV_UDP_TUNNEL_PUSH_INFO - udp_tunnel_drop_rx_info (__netdev_update_features) - triggers NETDEV_UDP_TUNNEL_DROP_INFO - udp_tunnel_nic_reset_ntf (ndo_open) - notifiers - udp_tunnel_nic_netdevice_event, depending on the event: - triggers NETDEV_UDP_TUNNEL_PUSH_INFO - triggers NETDEV_UDP_TUNNEL_DROP_INFO - ethnl_tunnel_info_reply_size - udp_tunnel_nic_set_port_priv (two intel drivers) Cc: Michael Chan <michael.chan@broadcom.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com> Link: https://patch.msgid.link/20250616162117.287806-4-stfomichev@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17sysfs: treewide: switch back to bin_attribute::read()/write()Thomas Weißschuh
The bin_attribute argument of bin_attribute::read() is now const. This makes the _new() callbacks unnecessary. Switch all users back. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20250530-sysfs-const-bin_attr-final-v3-3-724bfcf05b99@weissschuh.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-13qlcnic: fix memory leak in qlcnic_sriov_channel_cfg_cmd()Abdun Nihaal
In one of the error paths in qlcnic_sriov_channel_cfg_cmd(), the memory allocated in qlcnic_sriov_alloc_bc_mbx_args() for mailbox arguments is not freed. Fix that by jumping to the error path that frees them, by calling qlcnic_free_mbx_args(). This was found using static analysis. Fixes: f197a7aa6288 ("qlcnic: VF-PF communication channel implementation") Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250512044829.36400-1-abdun.nihaal@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-11qlcnic: fix memory leak issues in qlcnic_sriov_common.cHaoxiang Li
Add qlcnic_sriov_free_vlans() in qlcnic_sriov_alloc_vlans() if any sriov_vlans fails to be allocated. Add qlcnic_sriov_free_vlans() to free the memory allocated by qlcnic_sriov_alloc_vlans() if "sriov->allowed_vlans" fails to be allocated. Fixes: 91b7282b613d ("qlcnic: Support VLAN id config.") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com> Link: https://patch.msgid.link/20250307094952.14874-1-haoxiang_li2024@163.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-20qlcnic: use const 'struct bin_attribute' callbacksThomas Weißschuh
The sysfs core now provides callback variants that explicitly take a const pointer. Use them so the non-const variants can be removed. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://patch.msgid.link/20241219-sysfs-const-bin_attr-net-v2-1-93bdaece3c90@weissschuh.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15ndo_fdb_del: Add a parameter to report whether notification was sentPetr Machata
In a similar fashion to ndo_fdb_add, which was covered in the previous patch, add the bool *notified argument to ndo_fdb_del. Callees that send a notification on their own set the flag to true. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/06b1acf4953ef0a5ed153ef1f32d7292044f2be6.1731589511.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15ndo_fdb_add: Add a parameter to report whether notification was sentPetr Machata
Currently when FDB entries are added to or deleted from a VXLAN netdevice, the VXLAN driver emits one notification, including the VXLAN-specific attributes. The core however always sends a notification as well, a generic one. Thus two notifications are unnecessarily sent for these operations. A similar situation comes up with bridge driver, which also emits notifications on its own: # ip link add name vx type vxlan id 1000 dstport 4789 # bridge monitor fdb & [1] 1981693 # bridge fdb add de:ad:be:ef:13:37 dev vx self dst 192.0.2.1 de:ad:be:ef:13:37 dev vx dst 192.0.2.1 self permanent de:ad:be:ef:13:37 dev vx self permanent In order to prevent this duplicity, add a paremeter to ndo_fdb_add, bool *notified. The flag is primed to false, and if the callee sends a notification on its own, it sets it to true, thus informing the core that it should not generate another notification. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/cbf6ae8195e85cbf922f8058ce4eba770f3b71ed.1731589511.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-29net: qlogic: use ethtool string helpersRosen Penev
The latter is the preferred way to copy ethtool strings. Avoids manually incrementing the pointer. Cleans up the code quite well. Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241024195534.176410-1-rosenp@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11qlcnic: make read-only const array key staticColin Ian King
Don't populate the const read-only array key on the stack at run time, instead make it static. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240910120635.115266-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-03qlcnic: Remove unused declarationsYue Haibing
There is no caller and implementation in tree. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240902112904.556577-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-15ipv4: Remove redundant !ifa->ifa_dev check.Kuniyuki Iwashima
Now, ifa_dev is only set in inet_alloc_ifa() and never NULL after ifa gets visible. Let's remove the unneeded NULL check for ifa->ifa_dev. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20240809235406.50187-4-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07net: annotate writes on dev->mtu from ndo_change_mtu()Eric Dumazet
Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Simon Horman <horms@kernel.org> Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-04net: adopt skb_network_offset() and similar helpersEric Dumazet
This is a cleanup patch, making code a bit more concise. 1) Use skb_network_offset(skb) in place of (skb_network_header(skb) - skb->data) 2) Use -skb_network_offset(skb) in place of (skb->data - skb_network_header(skb)) 3) Use skb_transport_offset(skb) in place of (skb_transport_header(skb) - skb->data) 4) Use skb_inner_transport_offset(skb) in place of (skb_inner_transport_header(skb) - skb->data) Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> # for sfc Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-10qlcnic: replace deprecated strncpy with strscpyJustin Stitt
strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. We expect fw_info->fw_file_name to be NUL-terminated based on its use within _request_firmware_prepare() wherein `name` refers to it: | if (firmware_request_builtin_buf(firmware, name, dbuf, size)) { | dev_dbg(device, "using built-in %s\n", name); | return 0; /* assigned */ | } ... and with firmware_request_builtin() also via `name`: | if (strcmp(name, b_fw->name) == 0) { There is no evidence that NUL-padding is required. Additionally replace size macro (QLC_FW_FILE_NAME_LEN) with sizeof(fw_info->fw_file_name) to more directly tie the maximum buffer size to the destination buffer: Considering the above, a suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-23net: vlan: introduce skb_vlan_eth_hdr()Vladimir Oltean
Similar to skb_eth_hdr() introduced in commit 96cc4b69581d ("macvlan: do not assume mac_header is set in macvlan_broadcast()"), let's introduce a skb_vlan_eth_hdr() helper which can be used in TX-only code paths to get to the VLAN header based on skb->data rather than based on the skb_mac_header(skb). We also consolidate the drivers that dereference skb->data to go through this helper. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: tools/testing/selftests/net/config 62199e3f1658 ("selftests: net: Add VXLAN MDB test") 3a0385be133e ("selftests: add the missing CONFIG_IP_SCTP in net config") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-12qlcnic: check pci_reset_function resultDenis Plotnikov
Static code analyzer complains to unchecked return value. The result of pci_reset_function() is unchecked. Despite, the issue is on the FLR supported code path and in that case reset can be done with pcie_flr(), the patch uses less invasive approach by adding the result check of pci_reset_function(). Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 7e2cf4feba05 ("qlcnic: change driver hardware interface mechanism") Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-08qlcnic: Remove unnecessary aer.h includeBjorn Helgaas
<linux/aer.h> is unused, so remove it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Shahed Shaikh <shshaikh@marvell.com> Cc: Manish Chopra <manishc@marvell.com> Cc: GR-Linux-NIC-Dev@marvell.com Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-08qlcnic: Drop redundant pci_enable_pcie_error_reporting()Bjorn Helgaas
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Shahed Shaikh <shshaikh@marvell.com> Cc: Manish Chopra <manishc@marvell.com> Cc: GR-Linux-NIC-Dev@marvell.com Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-26qlcnic: prevent ->dcb use-after-free on qlcnic_dcb_enable() failureDaniil Tatianin
adapter->dcb would get silently freed inside qlcnic_dcb_enable() in case qlcnic_dcb_attach() would return an error, which always happens under OOM conditions. This would lead to use-after-free because both of the existing callers invoke qlcnic_dcb_get_info() on the obtained pointer, which is potentially freed at that point. Propagate errors from qlcnic_dcb_enable(), and instead free the dcb pointer at callsite using qlcnic_dcb_free(). This also removes the now unused qlcnic_clear_dcb_ops() helper, which was a simple wrapper around kfree() also causing memory leaks for partially initialized dcb. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Fixes: 3c44bba1d270 ("qlcnic: Disable DCB operations from SR-IOV VFs") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Merge in the left-over fixes before the net-next pull-request. net/mptcp/subflow.c d3295fee3c75 ("mptcp: use proper req destructor for IPv6") 36b122baf6a8 ("mptcp: add subflow_v(4,6)_send_synack()") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-12-12qlcnic: Clean up some inconsistent indentingJiapeng Chong
No functional modification involved. drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c:714 qlcnic_validate_ring_count() warn: inconsistent indenting. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3419 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20221212055813.91154-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-09drivers: net: qlcnic: Fix potential memory leak in qlcnic_sriov_init()Yuan Can
If vp alloc failed in qlcnic_sriov_init(), all previously allocated vp needs to be freed. Fixes: f197a7aa6288 ("qlcnic: VF-PF communication channel implementation") Signed-off-by: Yuan Can <yuancan@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-25qlcnic: fix sleep-in-atomic-context bugs caused by msleepDuoming Zhou
The watchdog timer is used to monitor whether the process of transmitting data is timeout. If we use qlcnic driver, the dev_watchdog() that is the timer handler of watchdog timer will call qlcnic_tx_timeout() to process the timeout. But the qlcnic_tx_timeout() calls msleep(), as a result, the sleep-in-atomic-context bugs will happen. The processes are shown below: (atomic context) dev_watchdog qlcnic_tx_timeout qlcnic_83xx_idc_request_reset qlcnic_83xx_lock_driver msleep --------------------------- (atomic context) dev_watchdog qlcnic_tx_timeout qlcnic_83xx_idc_request_reset qlcnic_83xx_lock_driver qlcnic_83xx_recover_driver_lock msleep Fix by changing msleep() to mdelay(), the mdelay() is busy-waiting and the bugs could be mitigated. Fixes: 629263acaea3 ("qlcnic: 83xx CNA inter driver communication mechanism") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-28net: drop the weight argument from netif_napi_addJakub Kicinski
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-31net: ethernet: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <geoff@infradead.org> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <thomas.lendacky@amd.com> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <mw@semihalf.com> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <leonro@nvidia.com> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <shayagr@amazon.com> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <khalasa@piap.pl> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-02net: add skb_[inner_]tcp_all_headers helpersEric Dumazet
Most drivers use "skb_transport_offset(skb) + tcp_hdrlen(skb)" to compute headers length for a TCP packet, but others use more convoluted (but equivalent) ways. Add skb_tcp_all_headers() and skb_inner_tcp_all_headers() helpers to harmonize this a bit. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-10ethernet: Remove vf rate limit check for driversBin Chen
The commit a14857c27a50 ("rtnetlink: verify rate parameters for calls to ndo_set_vf_rate") has been merged to master, so we can to remove the now-duplicate checks in drivers. Signed-off-by: Bin Chen <bin.chen@corigine.com> Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220609084717.155154-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-09rtnetlink: add extack support in fdb del handlersAlaa Mohamed
Add extack support to .ndo_fdb_del in netdevice.h and all related methods. Signed-off-by: Alaa Mohamed <eng.alaamohamedsoliman.am@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-05net: switch to netif_napi_add_tx()Jakub Kicinski
Switch net callers to the new API not requiring the NAPI_POLL_WEIGHT argument. Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org> Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Acked-by: Alexandra Winter <wintera@linux.ibm.com> Link: https://lore.kernel.org/r/20220504163725.550782-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-26qlcnic: dcb: default to returning -EOPNOTSUPPTom Rix
Clang static analysis reports this issue qlcnic_dcb.c:382:10: warning: Assigned value is garbage or undefined mbx_out = *val; ^ ~~~~ val is set in the qlcnic_dcb_query_hw_capability() wrapper. If there is no query_hw_capability op in dcp, success is returned without setting the val. For this and similar wrappers, return -EOPNOTSUPP. Fixes: 14d385b99059 ("qlcnic: dcb: Query adapter DCB capabilities.") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-18qlcnic: remove redundant assignment to variable indexColin Ian King
Variable index is being assigned a value that is never read, it is being re-assigned later in a following for-loop. The assignment is redundant and can be removed. Cleans up clang scan build warning: drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c:1358:17: warning: Although the value stored to 'index' is used in the enclosing expression, the value is never actually read from 'index' [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20220318012035.89482-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-28net: qlcnic: use time_is_before_jiffies() instead of open coding itWang Qing
Use the helper function time_is_{before,after}_jiffies() to improve code readability. Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-09qlcnic: Simplify DMA settingChristophe JAILLET
As stated in [1], dma_set_mask() with a 64-bit mask will never fail if dev->dma_mask is non-NULL. So, if it fails, the 32 bits case will also fail for the same reason. So qlcnic_set_dma_mask(), (in qlcnic_main.c) can be simplified a lot and inlined directly in its only caller. If dma_set_mask_and_coherent() succeeds, 'pci_using_dac' is known to be 1. So it can be removed from all the calling chain. qlcnic_setup_netdev() can finally be simplified as-well. [1]: https://lkml.org/lkml/2021/6/7/398 Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/4996ab0337d62ec6a54b2edf234cd5ced4b4d7ad.1641649611.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
include/net/sock.h commit 8f905c0e7354 ("inet: fully convert sk->sk_rx_dst to RCU rules") commit 43f51df41729 ("net: move early demux fields close to sk_refcnt") https://lore.kernel.org/all/20211222141641.0caa0ab3@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-18qlcnic: potential dereference null pointer of rx_queue->page_ringJiasheng Jiang
The return value of kcalloc() needs to be checked. To avoid dereference of null pointer in case of the failure of alloc. Therefore, it might be better to change the return type of qlcnic_sriov_alloc_vlans() and return -ENOMEM when alloc fails and return 0 the others. Also, qlcnic_sriov_set_guest_vlan_mode() and __qlcnic_pci_sriov_enable() should deal with the return value of qlcnic_sriov_alloc_vlans(). Fixes: 154d0c810c53 ("qlcnic: VLAN enhancement for 84XX adapters") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-01net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings()Zhou Qingyang
In qlcnic_83xx_add_rings(), the indirect function of ahw->hw_ops->alloc_mbx_args will be called to allocate memory for cmd.req.arg, and there is a dereference of it in qlcnic_83xx_add_rings(), which could lead to a NULL pointer dereference on failure of the indirect function like qlcnic_83xx_alloc_mbx_args(). Fix this bug by adding a check of alloc_mbx_args(), this patch imitates the logic of mbx_cmd()'s failure handling. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_QLCNIC=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: 7f9664525f9c ("qlcnic: 83xx memory map and HW access routine") Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Link: https://lore.kernel.org/r/20211130110848.109026-1-zhou1615@umn.edu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-22ethtool: extend ringparam setting/getting API with rx_buf_lenHao Chen
Add two new parameters kernel_ringparam and extack for .get_ringparam and .set_ringparam to extend more ring params through netlink. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-05ethernet: use eth_hw_addr_set() for dev->addr_len casesJakub Kicinski
Convert all Ethernet drivers from memcpy(... dev->addr_len) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, dev->addr_len) + eth_hw_addr_set(dev, np) In theory addr_len may not be ETH_ALEN, but we don't expect non-Ethernet devices to live under this directory, and only the following cases of setting addr_len exist: - cxgb4 for mgmt device, and the drivers which set it to ETH_ALEN: s2io, mlx4, vxge. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ethernet: use eth_hw_addr_set()Jakub Kicinski
Convert all Ethernet drivers from memcpy(... ETH_ADDR) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, ETH_ALEN) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-10qlcnic: Remove redundant initialization of variable retColin Ian King
The variable ret is being initialized with a value that is never read, it is being updated later on. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-04qlcnic: Remove redundant unlock in qlcnic_pinit_from_romDinghao Liu
Previous commit 68233c583ab4 removes the qlcnic_rom_lock() in qlcnic_pinit_from_rom(), but remains its corresponding unlock function, which is odd. I'm not very sure whether the lock is missing, or the unlock is redundant. This bug is suggested by a static analysis tool, please advise. Fixes: 68233c583ab4 ("qlcnic: updated reset sequence") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24ethtool: extend coalesce setting uAPI with CQE modeYufeng Mo
In order to support more coalesce parameters through netlink, add two new parameter kernel_coal and extack for .set_coalesce and .get_coalesce, then some extra info can return to user with the netlink API. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-23qlcnic: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been hand modified to use 'dma_set_mask_and_coherent()' instead of 'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable. This is less verbose. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/ptp/Kconfig: 55c8fca1dae1 ("ptp_pch: Restore dependency on PCI") e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-17net: qlcnic: add missed unlock in qlcnic_83xx_flash_read32Dinghao Liu
qlcnic_83xx_unlock_flash() is called on all paths after we call qlcnic_83xx_lock_flash(), except for one error path on failure of QLCRD32(), which may cause a deadlock. This bug is suggested by a static analysis tool, please advise. Fixes: 81d0aeb0a4fff ("qlcnic: flash template based firmware reset recovery") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20210816131405.24024-1-dinghao.liu@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-02qlcnic: make the array random_data static const, makes object smallerColin Ian King
Don't populate the array random_data on the stack but instead it static const. Makes the object code smaller by 66 bytes. Before: text data bss dec hex filename 52895 10976 0 63871 f97f ../qlogic/qlcnic/qlcnic_ethtool.o After: text data bss dec hex filename 52701 11104 0 63805 f93d ../qlogic//qlcnic/qlcnic_ethtool.o (gcc version 10.2.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210801151659.146113-1-colin.king@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 06:45:31 +0000