summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/qlogic/qede/qede_main.c
AgeCommit message (Collapse)Author
2025-05-08net: qede: Initialize qede_ll_ops with designated initializerNathan Chancellor
After a recent change [1] in clang's randstruct implementation to randomize structures that only contain function pointers, there is an error because qede_ll_ops get randomized but does not use a designated initializer for the first member: drivers/net/ethernet/qlogic/qede/qede_main.c:206:2: error: a randomized struct can only be initialized with a designated initializer 206 | { | ^ Explicitly initialize the common member using a designated initializer to fix the build. Cc: stable@vger.kernel.org Fixes: 035f7f87b729 ("randstruct: Enable Clang support") Link: https://github.com/llvm/llvm-project/commit/04364fb888eea6db9811510607bed4b200bcb082 [1] Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://patch.msgid.link/20250507-qede-fix-clang-randstruct-v1-1-5ccc15626fba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-17qede: fix firmware halt over suspend and resumeManish Chopra
While performing certain power-off sequences, PCI drivers are called to suspend and resume their underlying devices through PCI PM (power management) interface. However this NIC hardware does not support PCI PM suspend/resume operations so system wide suspend/resume leads to bad MFW (management firmware) state which causes various follow-up errors in driver when communicating with the device/firmware afterwards. To fix this driver implements PCI PM suspend handler to indicate unsupported operation to the PCI subsystem explicitly, thus avoiding system to go into suspended/standby mode. Without this fix device/firmware does not recover unless system is power cycled. Fixes: 2950219d87b0 ("qede: Add basic network device support") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Alok Prasad <palok@marvell.com> Reviewed-by: John Meneghini <jmeneghi@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230816150711.59035-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-06qed/qede: Fix scheduling while atomicManish Chopra
Statistics read through bond interface via sysfs causes below bug and traces as it triggers the bonding module to collect the slave device statistics while holding the spinlock, beneath that qede->qed driver statistics flow gets scheduled out due to usleep_range() used in PTT acquire logic [ 3673.988874] Hardware name: HPE ProLiant DL365 Gen10 Plus/ProLiant DL365 Gen10 Plus, BIOS A42 10/29/2021 [ 3673.988878] Call Trace: [ 3673.988891] dump_stack_lvl+0x34/0x44 [ 3673.988908] __schedule_bug.cold+0x47/0x53 [ 3673.988918] __schedule+0x3fb/0x560 [ 3673.988929] schedule+0x43/0xb0 [ 3673.988932] schedule_hrtimeout_range_clock+0xbf/0x1b0 [ 3673.988937] ? __hrtimer_init+0xc0/0xc0 [ 3673.988950] usleep_range+0x5e/0x80 [ 3673.988955] qed_ptt_acquire+0x2b/0xd0 [qed] [ 3673.988981] _qed_get_vport_stats+0x141/0x240 [qed] [ 3673.989001] qed_get_vport_stats+0x18/0x80 [qed] [ 3673.989016] qede_fill_by_demand_stats+0x37/0x400 [qede] [ 3673.989028] qede_get_stats64+0x19/0xe0 [qede] [ 3673.989034] dev_get_stats+0x5c/0xc0 [ 3673.989045] netstat_show.constprop.0+0x52/0xb0 [ 3673.989055] dev_attr_show+0x19/0x40 [ 3673.989065] sysfs_kf_seq_show+0x9b/0xf0 [ 3673.989076] seq_read_iter+0x120/0x4b0 [ 3673.989087] new_sync_read+0x118/0x1a0 [ 3673.989095] vfs_read+0xf3/0x180 [ 3673.989099] ksys_read+0x5f/0xe0 [ 3673.989102] do_syscall_64+0x3b/0x90 [ 3673.989109] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3673.989115] RIP: 0033:0x7f8467d0b082 [ 3673.989119] Code: c0 e9 b2 fe ff ff 50 48 8d 3d ca 05 08 00 e8 35 e7 01 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 3673.989121] RSP: 002b:00007ffffb21fd08 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 3673.989127] RAX: ffffffffffffffda RBX: 000000000100eca0 RCX: 00007f8467d0b082 [ 3673.989128] RDX: 00000000000003ff RSI: 00007ffffb21fdc0 RDI: 0000000000000003 [ 3673.989130] RBP: 00007f8467b96028 R08: 0000000000000010 R09: 00007ffffb21ec00 [ 3673.989132] R10: 00007ffffb27b170 R11: 0000000000000246 R12: 00000000000000f0 [ 3673.989134] R13: 0000000000000003 R14: 00007f8467b92000 R15: 0000000000045a05 [ 3673.989139] CPU: 30 PID: 285188 Comm: read_all Kdump: loaded Tainted: G W OE Fix this by collecting the statistics asynchronously from a periodic delayed work scheduled at default stats coalescing interval and return the recent copy of statisitcs from .ndo_get_stats64(), also add ability to configure/retrieve stats coalescing interval using below commands - ethtool -C ethx stats-block-usecs <val> ethtool -c ethx Fixes: 133fac0eedc3 ("qede: Add basic ethtool support") Cc: Sudarsana Kalluru <skalluru@marvell.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Manish Chopra <manishc@marvell.com> Link: https://lore.kernel.org/r/20230605112600.48238-1-manishc@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-08net: qede: Remove unnecessary aer.h includeBjorn Helgaas
<linux/aer.h> is unused, so remove it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Ariel Elior <aelior@marvell.com> Cc: Manish Chopra <manishc@marvell.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-26qede: avoid uninitialized entries in coal_entry arrayMichal Schmidt
Even after commit 908d4bb7c54c ("qede: fix interrupt coalescing configuration"), some entries of the coal_entry array may theoretically be used uninitialized: 1. qede_alloc_fp_array() allocates QEDE_MAX_RSS_CNT entries for coal_entry. The initial allocation uses kcalloc, so everything is initialized. 2. The user sets a small number of queues (ethtool -L). coal_entry is reallocated for the actual small number of queues. 3. The user sets a bigger number of queues. coal_entry is reallocated bigger. The added entries are not necessarily initialized. In practice, the reallocations will actually keep using the originally allocated region of memory, but we should not rely on it. The reallocation is unnecessary. coal_entry can always have QEDE_MAX_RSS_CNT entries. Fixes: 908d4bb7c54c ("qede: fix interrupt coalescing configuration") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Nacked-by: Manish Chopra <manishc@marvell.com> Acked-by: Manish Chopra <manishc@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Per-next-PR merge. net/smc/af_smc.c b5dd4d698171 ("net/smc: llc_conf_mutex refactor, replace it with rw_semaphore") e40b801b3603 ("net/smc: fix potential panic dues to unprotected smc_llc_srv_add_link()") https://lore.kernel.org/all/20230221124008.6303c330@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-20qede: fix interrupt coalescing configurationManish Chopra
On default driver load device gets configured with unexpected higher interrupt coalescing values instead of default expected values as memory allocated from krealloc() is not supposed to be zeroed out and may contain garbage values. Fix this by allocating the memory of required size first with kcalloc() and then use krealloc() to resize and preserve the contents across down/up of the interface. Signed-off-by: Manish Chopra <manishc@marvell.com> Fixes: b0ec5489c480 ("qede: preserve per queue stats across up/down of interface") Cc: stable@vger.kernel.org Cc: Bhaskar Upadhaya <bupadhaya@marvell.com> Cc: David S. Miller <davem@davemloft.net> Link: https://bugzilla.redhat.com/show_bug.cgi?id=2160054 Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-02drivers: net: turn on XDP featuresMarek Majtyka
A summary of the flags being set for various drivers is given below. Note that XDP_F_REDIRECT_TARGET and XDP_F_FRAG_TARGET are features that can be turned off and on at runtime. This means that these flags may be set and unset under RTNL lock protection by the driver. Hence, READ_ONCE must be used by code loading the flag value. Also, these flags are not used for synchronization against the availability of XDP resources on a device. It is merely a hint, and hence the read may race with the actual teardown of XDP resources on the device. This may change in the future, e.g. operations taking a reference on the XDP resources of the driver, and in turn inhibiting turning off this flag. However, for now, it can only be used as a hint to check whether device supports becoming a redirection target. Turn 'hw-offload' feature flag on for: - netronome (nfp) - netdevsim. Turn 'native' and 'zerocopy' features flags on for: - intel (i40e, ice, ixgbe, igc) - mellanox (mlx5). - stmmac - netronome (nfp) Turn 'native' features flags on for: - amazon (ena) - broadcom (bnxt) - freescale (dpaa, dpaa2, enetc) - funeth - intel (igb) - marvell (mvneta, mvpp2, octeontx2) - mellanox (mlx4) - mtk_eth_soc - qlogic (qede) - sfc - socionext (netsec) - ti (cpsw) - tap - tsnep - veth - xen - virtio_net. Turn 'basic' (tx, pass, aborted and drop) features flags on for: - netronome (nfp) - cavium (thunder) - hyperv. Turn 'redirect_target' feature flag on for: - amanzon (ena) - broadcom (bnxt) - freescale (dpaa, dpaa2) - intel (i40e, ice, igb, ixgbe) - ti (cpsw) - marvell (mvneta, mvpp2) - sfc - socionext (netsec) - qlogic (qede) - mellanox (mlx5) - tap - veth - virtio_net - xen Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Stanislav Fomichev <sdf@google.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Marek Majtyka <alardam@gmail.com> Link: https://lore.kernel.org/r/3eca9fafb308462f7edb1f58e451d59209aa07eb.1675245258.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-09-28net: drop the weight argument from netif_napi_addJakub Kicinski
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-31net: ethernet: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <geoff@infradead.org> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <thomas.lendacky@amd.com> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <mw@semihalf.com> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <leonro@nvidia.com> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <shayagr@amazon.com> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <khalasa@piap.pl> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-17net: qede: Remove unnecessary synchronize_irq() before free_irq()Minghao Chi
Calling synchronize_irq() right before free_irq() is quite useless. On one hand the IRQ can easily fire again before free_irq() is entered, on the other hand free_irq() itself calls synchronize_irq() internally (in a race condition free way), before any state associated with the IRQ is freed. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20220516082251.1651350-1-chi.minghao@zte.com.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2021-12-03qed*: enhance tx timeout debug infoManish Chopra
This patch add some new qed APIs to query status block info and report various data to MFW on tx timeout event Along with that it enhances qede to dump more debug logs (not just specific to the queue which was reported by stack) on tx timeout which includes various other basic metadata about all tx queues and other info (like status block etc.) Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-04qed: Remove e4_ and _e4 from FW HSIShai Malin
The existing qed/qede/qedr/qedi/qedf code uses chip-specific naming in structures, functions, variables and defines in FW HSI (Hardware Software Interface). The new FW version introduced a generic naming convention in HSI in-which the same code will be used across different versions for simpler maintainability. It also eases in providing support for new features. With this patch every "_e4" or "e4_" prefix or suffix is not needed anymore and it will be removed. Reviewed-by: Manish Rangankar <mrangankar@marvell.com> Reviewed-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-04qed: Fix kernel-doc warningsPrabhakar Kushwaha
This patch fixes all the qed and qede kernel-doc warnings according to the guidelines that are described in Documentation/doc-guide/kernel-doc.rst. Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ethernet: use eth_hw_addr_set() instead of ether_addr_copy()Jakub Kicinski
Convert Ethernet from ether_addr_copy() to eth_hw_addr_set(): @@ expression dev, np; @@ - ether_addr_copy(dev->dev_addr, np) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-24qed: Don't ignore devlink allocation failuresLeon Romanovsky
devlink is a software interface that doesn't depend on any hardware capabilities. The failure in SW means memory issues, wrong parameters, programmer error e.t.c. Like any other such interface in the kernel, the returned status of devlink APIs should be checked and propagated further and not ignored. Fixes: 755f982bb1ff ("qed/qede: make devlink survive recovery") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/wwan/mhi_wwan_mbim.c - drop the extra arg. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-25qede: Fix memset corruptionShai Malin
Thanks to Kees Cook who detected the problem of memset that starting from not the first member, but sized for the whole struct. The better change will be to remove the redundant memset and to clear only the msix_cnt member. Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Reported-by: Kees Cook <keescook@chromium.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25qed: Enable automatic recovery on error condition.Alok Prasad
This patch enables automatic recovery by default in case of various error condition like fw assert , hardware error etc. This also ensure driver can handle multiple iteration of assertion conditions. Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Build failure in drivers/net/wwan/mhi_wwan_mbim.c: add missing parameter (0, assuming we don't want buffer pre-alloc). Conflict in drivers/net/dsa/sja1105/sja1105_main.c between: 589918df9322 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too") 0fac6aa098ed ("net: dsa: sja1105: delete the best_effort_vlan_filtering mode") Follow the instructions from the commit message of the former commit - removed the if conditions. When looking at commit 589918df9322 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too") note that the mask_iotag fields get removed by the following patch. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-02qede: fix crash in rmmod qede while automatic debug collectionPrabhakar Kushwaha
A crash has been observed if rmmod is done while automatic debug collection in progress. It is due to a race condition between both of them. To fix stop the sp_task during unload to avoid running qede_sp_task even if they are schedule during removal process. Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29qede: Remove the qede module versionShai Malin
Removing the qede module version which is not needed and not allowed with inbox drivers. Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25qede: remove unused including <linux/version.h>Zheng Yongjun
Remove including <linux/version.h> that don't need it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11qede: preserve per queue stats across up/down of interfaceBhaskar Upadhaya
Here we do the initialization of coalescing values on load. per queue coalesce values are also restored across up/down of ethernet interface. Signed-off-by: Bhaskar Upadhaya <bupadhaya@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-07net: remove ndo_udp_tunnel_* callbacksJakub Kicinski
All UDP tunnel port management is now routed via udp_tunnel_nic infra directly. Remove the old callbacks. Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01xsk: Propagate napi_id to XDP socket Rx pathBjörn Töpel
Add napi_id to the xdp_rxq_info structure, and make sure the XDP socket pick up the napi_id in the Rx path. The napi_id is used to find the corresponding NAPI structure for socket busy polling. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/bpf/20201130185205.196029-7-bjorn.topel@gmail.com
2020-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Two minor conflicts: 1) net/ipv4/route.c, adding a new local variable while moving another local variable and removing it's initial assignment. 2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes. One pretty prints the port mode differently, whilst another changes the driver to try and obtain the port mode from the port node rather than the switch node. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09net: qede: Disable aRFS for NPAR and 100GDmitry Bogdanov
In some configurations ARFS cannot be used, so disable it if device is not capable. Fixes: e4917d46a653 ("qede: Add aRFS support") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24qede: make driver reliable on unload after failuresIgor Russkikh
In case recovery was not successful, netdev still should be present. But we should clear cdev if something bad happens on recovery. We also check cdev for null on dev close. That could be a case if recovery was not successful. Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24qed*: make use of devlink recovery infrastructureIgor Russkikh
Remove forcible recovery trigger and put it as a normal devlink callback. This allows user to enable/disable it via devlink health set pci/0000:03:00.0 reporter fw_fatal auto_recover false Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24qed: use devlink logic to report errorsIgor Russkikh
Use devlink_health_report to push error indications. We implement this in qede via callback function to make it possible to reuse the same for other drivers sitting on top of qed in future. Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24qed/qede: make devlink survive recoveryIgor Russkikh
Devlink instance lifecycle was linked to qed_dev object, that caused devlink to be recreated on each recovery. Changing it by making higher level driver (qede) responsible for its life. This way devlink now survives recoveries. qede now stores devlink structure pointer as a part of its device object, devlink private data contains a linkage structure, qed_devlink. Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-03net: qede: use eth_zero_addr() to clear mac addressMiaohe Lin
Use eth_zero_addr() to clear mac address instead of memset(). Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31qede: Use %pM format specifier for MAC addressesAndy Shevchenko
Convert to %pM instead of using custom code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22qede: add .ndo_xdp_xmit() and XDP_REDIRECT supportAlexander Lobakin
Add XDP_REDIRECT case handling and the corresponding NDO to support redirecting XDP frames. This also includes registering driver memory model (currently order-0 page mode) in BPF subsystem. The total number of XDP queues is usually 1:1 with Rx ones. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22qede: reformat net_device_ops declarationsAlexander Lobakin
Correct the indentation of net_device_ops declarations for fancier look. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22qed: simplify chain allocation with init params structAlexander Lobakin
To simplify qed_chain_alloc() prototype and call sites, introduce struct qed_chain_init_params to specify chain params, and pass a pointer to filled struct to the actual qed_chain_alloc() instead of a long list of separate arguments. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20qede: populate supported link modes maps on module initAlexander Lobakin
Simplify and lighten qede_set_link_ksettings() by declaring static link modes maps and populating them on module init. This way we save plenty of text size at the low expense of __ro_after_init and __initconst data (the latter will be purged after module init is done). Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14qede: convert to new udp_tunnel_nic infraJakub Kicinski
Covert to new infra. Looks like this driver was not doing ref counting, and sleeping in the callback. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-30net: qede: update copyright yearsAlexander Lobakin
Set the actual copyright holder and years in all qede source files. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-30net: qede: convert to SPDX License IdentifiersAlexander Lobakin
QLogic QED drivers source code is dual licensed under GPL-2.0/BSD-3-Clause. Remove all the boilerplates in the existing code and replace it with the correct SPDX tag. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qede: fix use-after-free on recovery and AER handlingAlexander Lobakin
Set edev->cdev pointer to NULL after calling remove() callback to avoid using of already freed object. Fixes: ccc67ef50b90 ("qede: Error recovery process") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23net: qede: fix PTP initialization on recoveryAlexander Lobakin
Currently PTP cyclecounter and timecounter are initialized only on the first probing and are cleaned up during removal. This means that PTP becomes non-functional after device recovery. Fix this by unconditional PTP initialization on probing and clearing Tx pending bit on exiting. Fixes: ccc67ef50b90 ("qede: Error recovery process") Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-05net: qed: fixes crash while running driver in kdump kernelAlok Prasad
This fixes a crash introduced by recent is_kdump_kernel() check. The source of the crash is that kdump kernel can be loaded on a system with already created VFs. But for such VFs, it will follow a logic path of PF and eventually crash. Thus, we are partially reverting back previous changes and instead use is_kdump_kernel is a single init point of PF init, where we disable SRIOV explicitly. Fixes: 37d4f8a6b41f ("net: qed: Disable SRIOV functionality inside kdump kernel") Cc: Bhupesh Sharma <bhsharma@redhat.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14qlogic/qede: Add XDP frame size to driverJesper Dangaard Brouer
The driver qede uses a full page, when XDP is enabled. The drivers value in rx_buf_seg_size (struct qede_rx_queue) will be PAGE_SIZE when an XDP bpf_prog is attached. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: Ariel Elior <aelior@marvell.com> Cc: GR-everest-linux-l2@marvell.com Link: https://lore.kernel.org/bpf/158945340366.97035.7764939691580349618.stgit@firesoul
2020-05-14net: qede: Implement ndo_tx_timeoutDenis Bolotin
Upon tx timeout detection we do disable carrier and print TX queue info on TX timeout. We then raise hw error condition and trigger service task to handle this. This handler will capture extra debug info and then optionally trigger recovery procedure to try restore function. Signed-off-by: Denis Bolotin <dbolotin@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qed: attention clearing propertiesIgor Russkikh
On different hardware events we have to respond differently, on some of hardware indications hw attention (error condition) should be cleared by the driver to continue normal functioning. Here we introduce attention clear flags, and put them on some important events (in aeu_descs). Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qede: add hw err scheduled handlerIgor Russkikh
qede (ethernet level driver) registers a callback handler. This handler maintains eth dev state flags/bits to track error processing. It implements in place processing part for nonsleeping context (WARN_ON trigger), and a deferred (delayed work) part which triggers recovery process for recoverable errors. In later patches this atomic handler will come with more meat. We introduce err_flags on ethdevice structure, its being used to record error handling properties. Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-11net: qed: Disable SRIOV functionality inside kdump kernelBhupesh Sharma
Since we have kdump kernel(s) running under severe memory constraint it makes sense to disable the qed SRIOV functionality when running the kdump kernel as kdump configurations on several distributions don't support SRIOV targets for saving the vmcore (see [1] for example). Currently the qed SRIOV functionality ends up consuming memory in the kdump kernel, when we don't really use the same. An example log seen in the kdump kernel with the SRIOV functionality enabled can be seen below (obtained via memstrack tool, see [2]): dracut-pre-pivot[676]: ======== Report format module_summary: ======== dracut-pre-pivot[676]: Module qed using 149.6MB (2394 pages), peak allocation 149.6MB (2394 pages) This patch disables the SRIOV functionality inside kdump kernel and with the same applied the memory consumption goes down: dracut-pre-pivot[671]: ======== Report format module_summary: ======== dracut-pre-pivot[671]: Module qed using 124.6MB (1993 pages), peak allocation 124.7MB (1995 pages) [1]. https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html/managing_monitoring_and_updating_the_kernel/installing-and-configuring-kdump_managing-monitoring-and-updating-the-kernel#supported-kdump-targets_supported-kdump-configurations-and-targets [2]. Memstrack tool: https://github.com/ryncsn/memstrack Cc: kexec@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: Ariel Elior <aelior@marvell.com> Cc: GR-everest-linux-l2@marvell.com Cc: Manish Chopra <manishc@marvell.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 06:04:52 +0000