| Age | Commit message (Collapse) | Author |
|---|
|
Two minor conflicts:
1) net/ipv4/route.c, adding a new local variable while
moving another local variable and removing it's
initial assignment.
2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes.
One pretty prints the port mode differently, whilst another
changes the driver to try and obtain the port mode from
the port node rather than the switch node.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In some configurations ARFS cannot be used, so disable it if device
is not capable.
Fixes: e4917d46a653 ("qede: Add aRFS support")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In case recovery was not successful, netdev still should be
present. But we should clear cdev if something bad happens
on recovery.
We also check cdev for null on dev close. That could be a case
if recovery was not successful.
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove forcible recovery trigger and put it as a normal devlink
callback.
This allows user to enable/disable it via
devlink health set pci/0000:03:00.0 reporter fw_fatal auto_recover false
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use devlink_health_report to push error indications.
We implement this in qede via callback function to make it possible
to reuse the same for other drivers sitting on top of qed in future.
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Devlink instance lifecycle was linked to qed_dev object,
that caused devlink to be recreated on each recovery.
Changing it by making higher level driver (qede) responsible for its
life. This way devlink now survives recoveries.
qede now stores devlink structure pointer as a part of its device
object, devlink private data contains a linkage structure,
qed_devlink.
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use eth_zero_addr() to clear mac address instead of memset().
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert to %pM instead of using custom code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add XDP_REDIRECT case handling and the corresponding NDO to support
redirecting XDP frames. This also includes registering driver memory
model (currently order-0 page mode) in BPF subsystem.
The total number of XDP queues is usually 1:1 with Rx ones.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Correct the indentation of net_device_ops declarations for fancier look.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To simplify qed_chain_alloc() prototype and call sites, introduce struct
qed_chain_init_params to specify chain params, and pass a pointer to
filled struct to the actual qed_chain_alloc() instead of a long list
of separate arguments.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify and lighten qede_set_link_ksettings() by declaring static link
modes maps and populating them on module init. This way we save plenty
of text size at the low expense of __ro_after_init and __initconst data
(the latter will be purged after module init is done).
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Covert to new infra. Looks like this driver was not doing
ref counting, and sleeping in the callback.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set the actual copyright holder and years in all qede source files.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
QLogic QED drivers source code is dual licensed under
GPL-2.0/BSD-3-Clause.
Remove all the boilerplates in the existing code and replace it with the
correct SPDX tag.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set edev->cdev pointer to NULL after calling remove() callback to avoid
using of already freed object.
Fixes: ccc67ef50b90 ("qede: Error recovery process")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently PTP cyclecounter and timecounter are initialized only on
the first probing and are cleaned up during removal. This means that
PTP becomes non-functional after device recovery.
Fix this by unconditional PTP initialization on probing and clearing
Tx pending bit on exiting.
Fixes: ccc67ef50b90 ("qede: Error recovery process")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This fixes a crash introduced by recent is_kdump_kernel() check.
The source of the crash is that kdump kernel can be loaded on a
system with already created VFs. But for such VFs, it will follow
a logic path of PF and eventually crash.
Thus, we are partially reverting back previous changes and instead
use is_kdump_kernel is a single init point of PF init, where we
disable SRIOV explicitly.
Fixes: 37d4f8a6b41f ("net: qed: Disable SRIOV functionality inside kdump kernel")
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver qede uses a full page, when XDP is enabled. The drivers value
in rx_buf_seg_size (struct qede_rx_queue) will be PAGE_SIZE when an
XDP bpf_prog is attached.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Ariel Elior <aelior@marvell.com>
Cc: GR-everest-linux-l2@marvell.com
Link: https://lore.kernel.org/bpf/158945340366.97035.7764939691580349618.stgit@firesoul
|
|
Upon tx timeout detection we do disable carrier and print TX queue
info on TX timeout. We then raise hw error condition and trigger
service task to handle this.
This handler will capture extra debug info and then optionally
trigger recovery procedure to try restore function.
Signed-off-by: Denis Bolotin <dbolotin@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On different hardware events we have to respond differently,
on some of hardware indications hw attention (error condition)
should be cleared by the driver to continue normal functioning.
Here we introduce attention clear flags, and put them on some
important events (in aeu_descs).
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
qede (ethernet level driver) registers a callback handler.
This handler maintains eth dev state flags/bits to track error processing.
It implements in place processing part for nonsleeping context (WARN_ON
trigger), and a deferred (delayed work) part which triggers recovery
process for recoverable errors.
In later patches this atomic handler will come with more meat.
We introduce err_flags on ethdevice structure, its being used to record
error handling properties.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since we have kdump kernel(s) running under severe memory constraint
it makes sense to disable the qed SRIOV functionality when running the
kdump kernel as kdump configurations on several distributions don't
support SRIOV targets for saving the vmcore (see [1] for example).
Currently the qed SRIOV functionality ends up consuming memory in
the kdump kernel, when we don't really use the same.
An example log seen in the kdump kernel with the SRIOV functionality
enabled can be seen below (obtained via memstrack tool, see [2]):
dracut-pre-pivot[676]: ======== Report format module_summary: ========
dracut-pre-pivot[676]: Module qed using 149.6MB (2394 pages), peak allocation 149.6MB (2394 pages)
This patch disables the SRIOV functionality inside kdump kernel and with
the same applied the memory consumption goes down:
dracut-pre-pivot[671]: ======== Report format module_summary: ========
dracut-pre-pivot[671]: Module qed using 124.6MB (1993 pages), peak allocation 124.7MB (1995 pages)
[1]. https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html/managing_monitoring_and_updating_the_kernel/installing-and-configuring-kdump_managing-monitoring-and-updating-the-kernel#supported-kdump-targets_supported-kdump-configurations-and-targets
[2]. Memstrack tool: https://github.com/ryncsn/memstrack
Cc: kexec@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: Ariel Elior <aelior@marvell.com>
Cc: GR-everest-linux-l2@marvell.com
Cc: Manish Chopra <manishc@marvell.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Normally kdump kernel(s) run under severe memory constraint with the
basic idea being to save the crashdump vmcore reliably when the primary
kernel panics/hangs.
Currently the qed* ethernet driver ends up consuming a lot of memory in
the kdump kernel, leading to kdump kernel panic when one tries to save
the vmcore via ssh/nfs (thus utilizing the services of the underlying
qed* network interfaces).
An example OOM message log seen in the kdump kernel can be seen here
[1], with crashkernel size reservation of 512M.
Using tools like memstrack (see [2]), we can track the modules taking up
the bulk of memory in the kdump kernel and organize the memory usage
output as per 'highest allocator first'. An example log for the OOM case
indicates that the qed* modules end up allocating approximately 216M
memory, which is a large part of the total crashkernel size:
dracut-pre-pivot[676]: ======== Report format module_summary: ========
dracut-pre-pivot[676]: Module qed using 149.6MB (2394 pages), peak allocation 149.6MB (2394 pages)
dracut-pre-pivot[676]: Module qede using 65.3MB (1045 pages), peak allocation 65.3MB (1045 pages)
This patch reduces the default RX and TX ring count from 1024 to 64
when running inside kdump kernel, which leads to a significant memory
saving.
An example log with the patch applied shows the reduced memory
allocation in the kdump kernel:
dracut-pre-pivot[674]: ======== Report format module_summary: ========
dracut-pre-pivot[674]: Module qed using 141.8MB (2268 pages), peak allocation 141.8MB (2268 pages)
<..snip..>
[dracut-pre-pivot[674]: Module qede using 4.8MB (76 pages), peak allocation 4.9MB (78 pages)
Tested crashdump vmcore save via ssh/nfs protocol using underlying qed*
network interface after applying this patch.
[1] OOM log:
------------
kworker/0:6: page allocation failure: order:6,
mode:0x60c0c0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null)
kworker/0:6 cpuset=/ mems_allowed=0
CPU: 0 PID: 145 Comm: kworker/0:6 Not tainted 4.18.0-109.el8.aarch64 #1
Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL025
01/18/2019
Workqueue: events work_for_cpu_fn
Call trace:
dump_backtrace+0x0/0x188
show_stack+0x24/0x30
dump_stack+0x90/0xb4
warn_alloc+0xf4/0x178
__alloc_pages_nodemask+0xcac/0xd58
alloc_pages_current+0x8c/0xf8
kmalloc_order_trace+0x38/0x108
qed_iov_alloc+0x40/0x248 [qed]
qed_resc_alloc+0x224/0x518 [qed]
qed_slowpath_start+0x254/0x928 [qed]
__qede_probe+0xf8/0x5e0 [qede]
qede_probe+0x68/0xd8 [qede]
local_pci_probe+0x44/0xa8
work_for_cpu_fn+0x20/0x30
process_one_work+0x1ac/0x3e8
worker_thread+0x44/0x448
kthread+0x130/0x138
ret_from_fork+0x10/0x18
Cannot start slowpath
qede: probe of 0000:05:00.1 failed with error -12
[2]. Memstrack tool: https://github.com/ryncsn/memstrack
Cc: kexec@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: Ariel Elior <aelior@marvell.com>
Cc: GR-everest-linux-l2@marvell.com
Cc: Manish Chopra <manishc@marvell.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix the following coccicheck warning:
drivers/net/ethernet/qlogic/qede/qede_main.c:1717:5-19: WARNING:
Assignment of 0/1 to bool variable
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The error recovery is handled by management firmware (MFW) with the help of
qed/qede drivers. Upon detecting the errors, driver informs MFW about this
event which in turn starts a recovery process. MFW sends ERROR_RECOVERY
notification to the driver which performs the required cleanup/recovery
from the driver side.
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
commit 18c602dee472 ("qede: Use NETIF_F_GRO_HW.") introduced
a regression in driver that when xdp program is installed on
qede device, device's aggregation feature (hardware GRO) is not
getting disabled, which is unexpected with xdp.
Fixes: 18c602dee472 ("qede: Use NETIF_F_GRO_HW.")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-11-20
The following pull-request contains BPF updates for your *net-next* tree.
We've added 81 non-merge commits during the last 17 day(s) which contain
a total of 120 files changed, 4958 insertions(+), 1081 deletions(-).
There are 3 trivial conflicts, resolve it by always taking the chunk from
196e8ca74886c433:
<<<<<<< HEAD
=======
void *bpf_map_area_mmapable_alloc(u64 size, int numa_node);
>>>>>>> 196e8ca74886c433dcfc64a809707074b936aaf5
<<<<<<< HEAD
void *bpf_map_area_alloc(u64 size, int numa_node)
=======
static void *__bpf_map_area_alloc(u64 size, int numa_node, bool mmapable)
>>>>>>> 196e8ca74886c433dcfc64a809707074b936aaf5
<<<<<<< HEAD
if (size <= (PAGE_SIZE << PAGE_ALLOC_COSTLY_ORDER)) {
=======
/* kmalloc()'ed memory can't be mmap()'ed */
if (!mmapable && size <= (PAGE_SIZE << PAGE_ALLOC_COSTLY_ORDER)) {
>>>>>>> 196e8ca74886c433dcfc64a809707074b936aaf5
The main changes are:
1) Addition of BPF trampoline which works as a bridge between kernel functions,
BPF programs and other BPF programs along with two new use cases: i) fentry/fexit
BPF programs for tracing with practically zero overhead to call into BPF (as
opposed to k[ret]probes) and ii) attachment of the former to networking related
programs to see input/output of networking programs (covering xdpdump use case),
from Alexei Starovoitov.
2) BPF array map mmap support and use in libbpf for global data maps; also a big
batch of libbpf improvements, among others, support for reading bitfields in a
relocatable manner (via libbpf's CO-RE helper API), from Andrii Nakryiko.
3) Extend s390x JIT with usage of relative long jumps and loads in order to lift
the current 64/512k size limits on JITed BPF programs there, from Ilya Leoshkevich.
4) Add BPF audit support and emit messages upon successful prog load and unload in
order to have a timeline of events, from Daniel Borkmann and Jiri Olsa.
5) Extension to libbpf and xdpsock sample programs to demo the shared umem mode
(XDP_SHARED_UMEM) as well as RX-only and TX-only sockets, from Magnus Karlsson.
6) Several follow-up bug fixes for libbpf's auto-pinning code and a new API
call named bpf_get_link_xdp_info() for retrieving the full set of prog
IDs attached to XDP, from Toke Høiland-Jørgensen.
7) Add BTF support for array of int, array of struct and multidimensional arrays
and enable it for skb->cb[] access in kfree_skb test, from Martin KaFai Lau.
8) Fix AF_XDP by using the correct number of channels from ethtool, from Luigi Rizzo.
9) Two fixes for BPF selftest to get rid of a hang in test_tc_tunnel and to avoid
xdping to be run as standalone, from Jiri Benc.
10) Various BPF selftest fixes when run with latest LLVM trunk, from Yonghong Song.
11) Fix a memory leak in BPF fentry test run data, from Colin Ian King.
12) Various smaller misc cleanups and improvements mostly all over BPF selftests and
samples, from Daniel T. Lee, Andre Guedes, Anders Roxell, Mao Wenan, Yue Haibing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Similarly to bpf_map's refcnt/usercnt, convert bpf_prog's refcnt to atomic64
and remove artificial 32k limit. This allows to make bpf_prog's refcounting
non-failing, simplifying logic of users of bpf_prog_add/bpf_prog_inc.
Validated compilation by running allyesconfig kernel build.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191117172806.2195367-3-andriin@fb.com
|
|
While rebooting the system with SR-IOV vfs enabled leads
to below crash due to recurrence of __qede_remove() on the VF
devices (first from .shutdown() flow of the VF itself and
another from PF's .shutdown() flow executing pci_disable_sriov())
This patch adds a safeguard in __qede_remove() flow to fix this,
so that driver doesn't attempt to remove "already removed" devices.
[ 194.360134] BUG: unable to handle kernel NULL pointer dereference at 00000000000008dc
[ 194.360227] IP: [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede]
[ 194.360304] PGD 0
[ 194.360325] Oops: 0000 [#1] SMP
[ 194.360360] Modules linked in: tcp_lp fuse tun bridge stp llc devlink bonding ip_set nfnetlink ib_isert iscsi_target_mod ib_srpt target_core_mod ib_srp scsi_transport_srp scsi_tgt ib_ipoib ib_umad rpcrdma sunrpc rdma_ucm ib_uverbs ib_iser rdma_cm iw_cm ib_cm libiscsi scsi_transport_iscsi dell_smbios iTCO_wdt iTCO_vendor_support dell_wmi_descriptor dcdbas vfat fat pcc_cpufreq skx_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd qedr ib_core pcspkr ses enclosure joydev ipmi_ssif sg i2c_i801 lpc_ich mei_me mei wmi ipmi_si ipmi_devintf ipmi_msghandler tpm_crb acpi_pad acpi_power_meter xfs libcrc32c sd_mod crc_t10dif crct10dif_generic crct10dif_pclmul crct10dif_common crc32c_intel mgag200
[ 194.361044] qede i2c_algo_bit drm_kms_helper qed syscopyarea sysfillrect nvme sysimgblt fb_sys_fops ttm nvme_core mpt3sas crc8 ptp drm pps_core ahci raid_class scsi_transport_sas libahci libata drm_panel_orientation_quirks nfit libnvdimm dm_mirror dm_region_hash dm_log dm_mod [last unloaded: ip_tables]
[ 194.361297] CPU: 51 PID: 7996 Comm: reboot Kdump: loaded Not tainted 3.10.0-1062.el7.x86_64 #1
[ 194.361359] Hardware name: Dell Inc. PowerEdge MX840c/0740HW, BIOS 2.4.6 10/15/2019
[ 194.361412] task: ffff9cea9b360000 ti: ffff9ceabebdc000 task.ti: ffff9ceabebdc000
[ 194.361463] RIP: 0010:[<ffffffffc03553c4>] [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede]
[ 194.361534] RSP: 0018:ffff9ceabebdfac0 EFLAGS: 00010282
[ 194.361570] RAX: 0000000000000000 RBX: ffff9cd013846098 RCX: 0000000000000000
[ 194.361621] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9cd013846098
[ 194.361668] RBP: ffff9ceabebdfae8 R08: 0000000000000000 R09: 0000000000000000
[ 194.361715] R10: 00000000bfe14201 R11: ffff9ceabfe141e0 R12: 0000000000000000
[ 194.361762] R13: ffff9cd013846098 R14: 0000000000000000 R15: ffff9ceab5e48000
[ 194.361810] FS: 00007f799c02d880(0000) GS:ffff9ceacb0c0000(0000) knlGS:0000000000000000
[ 194.361865] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 194.361903] CR2: 00000000000008dc CR3: 0000001bdac76000 CR4: 00000000007607e0
[ 194.361953] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 194.362002] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 194.362051] PKRU: 55555554
[ 194.362073] Call Trace:
[ 194.362109] [<ffffffffc0355500>] qede_remove+0x10/0x20 [qede]
[ 194.362180] [<ffffffffb97d0f3e>] pci_device_remove+0x3e/0xc0
[ 194.362240] [<ffffffffb98b3c52>] __device_release_driver+0x82/0xf0
[ 194.362285] [<ffffffffb98b3ce3>] device_release_driver+0x23/0x30
[ 194.362343] [<ffffffffb97c86d4>] pci_stop_bus_device+0x84/0xa0
[ 194.362388] [<ffffffffb97c87e2>] pci_stop_and_remove_bus_device+0x12/0x20
[ 194.362450] [<ffffffffb97f153f>] pci_iov_remove_virtfn+0xaf/0x160
[ 194.362496] [<ffffffffb97f1aec>] sriov_disable+0x3c/0xf0
[ 194.362534] [<ffffffffb97f1bc3>] pci_disable_sriov+0x23/0x30
[ 194.362599] [<ffffffffc02f83c3>] qed_sriov_disable+0x5e3/0x650 [qed]
[ 194.362658] [<ffffffffb9622df6>] ? kfree+0x106/0x140
[ 194.362709] [<ffffffffc02cc0c0>] ? qed_free_stream_mem+0x70/0x90 [qed]
[ 194.362754] [<ffffffffb9622df6>] ? kfree+0x106/0x140
[ 194.362803] [<ffffffffc02cd659>] qed_slowpath_stop+0x1a9/0x1d0 [qed]
[ 194.362854] [<ffffffffc035544e>] __qede_remove+0xae/0x130 [qede]
[ 194.362904] [<ffffffffc03554e0>] qede_shutdown+0x10/0x20 [qede]
[ 194.362956] [<ffffffffb97cf90a>] pci_device_shutdown+0x3a/0x60
[ 194.363010] [<ffffffffb98b180b>] device_shutdown+0xfb/0x1f0
[ 194.363066] [<ffffffffb94b66c6>] kernel_restart_prepare+0x36/0x40
[ 194.363107] [<ffffffffb94b66e2>] kernel_restart+0x12/0x60
[ 194.363146] [<ffffffffb94b6959>] SYSC_reboot+0x229/0x260
[ 194.363196] [<ffffffffb95f200d>] ? handle_mm_fault+0x39d/0x9b0
[ 194.363253] [<ffffffffb942b621>] ? __switch_to+0x151/0x580
[ 194.363304] [<ffffffffb9b7ec28>] ? __schedule+0x448/0x9c0
[ 194.363343] [<ffffffffb94b69fe>] SyS_reboot+0xe/0x10
[ 194.363387] [<ffffffffb9b8bede>] system_call_fastpath+0x25/0x2a
[ 194.363430] Code: f9 e9 37 ff ff ff 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 4c 8d af 98 00 00 00 41 54 4c 89 ef 41 89 f4 53 e8 4c e4 55 f9 <80> b8 dc 08 00 00 01 48 89 c3 4c 8d b8 c0 08 00 00 4c 8b b0 c0
[ 194.363712] RIP [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede]
[ 194.363764] RSP <ffff9ceabebdfac0>
[ 194.363791] CR2: 00000000000008dc
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Sudarsana Kalluru <skalluru@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
And any other existing fields in this structure that refer to tc.
Specifically:
* tc_cls_flower_offload_flow_rule() to flow_cls_offload_flow_rule().
* TC_CLSFLOWER_* to FLOW_CLS_*.
* tc_cls_common_offload to tc_cls_common_offload.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch updates flow_block_cb_setup_simple() to use the flow block API.
Several drivers are also adjusted to use it.
This patch introduces the per-driver list of flow blocks to account for
blocks that are already in use.
Remove tc_block_offload alias.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Most drivers do the same thing to set up the flow block callbacks, this
patch adds a helper function to do this.
This preparation patch reduces the number of changes to adapt the
existing drivers to use the flow block callback API.
This new helper function takes a flow block list per-driver, which is
set to NULL until this driver list is used.
This patch also introduces the flow_block_command and
flow_block_binder_type enumerations, which are renamed to use
FLOW_BLOCK_* in follow up patches.
There are three definitions (aliases) in order to reduce the number of
updates in this patch, which go away once drivers are fully adapted to
use this flow block API.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix sparse warning:
drivers/net/ethernet/qlogic/qede/qede_main.c:963:6:
warning: symbol 'qede_lock' was not declared. Should it be static?
drivers/net/ethernet/qlogic/qede/qede_main.c:969:6:
warning: symbol 'qede_unlock' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In PTP Tx implementation, driver kept scheduling a poll thread until the
timestamp is available. In the error scenarios (e.g. app requesting the
timestamp for non-ptp packet), this thread kept waiting for the timestamp
forever. This patch add changes to report such scenario as an error and
terminate the thread. Added a timeout of 2 seconds i.e., max time to wait
for Tx timestamp. Added a stat value ptp_skip_txts for reporting the number
of packets for which Tx timestamping is skipped.
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When initializing status blocks use the affined hwfn
instead of the leading one for RDMA / Storage
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
An ipvlan bug fix in 'net' conflicted with the abstraction away
of the IPV6 specific support in 'net-next'.
Similarly, a bug fix for mlx5 in 'net' conflicted with the flow
action conversion in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Under heavy traffic load, when changing number of channels via
ethtool (ethtool -L) which will cause interface to be reloaded,
it was observed that some packets gets transmitted on old TX
channel/queue id which doesn't really exist after the channel
configuration leads to system crash.
Add a safeguard in the driver by validating queue id through
ndo_select_queue() which is called before the ndo_start_xmit().
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the error recovery process in the qede driver.
The process includes a partial/customized driver unload and load, which
allows it to look like a short suspend period to the kernel while
preserving the net devices' state.
Signed-off-by: Tomer Tayar <tomer.tayar@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All L2 queues funnel through this flow, so this would cover the
regular RSS queues, as well queues created for VFs, mqos queues,
xdp queues, etc.
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the case of internal reload (e.g., mtu change), there could be a race
between link-up notification from mfw and the driver unload processing. In
such case kernel assumes the link is up and starts using the queues which
leads to the server crash.
Send link notification to the kernel only when driver has already requested
MFW for the link.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The values represented by qede->flags is being used in mixed ways:
1. As 'value' at some places e.g., QEDE_FLAGS_IS_VF usage
2. As bit-mask(value) at some places e.g., QEDE_FLAGS_PTP_TX_IN_PRORGESS
usage.
This implementation pose problems in future when we want to add more flag
values e.g., overlap of the values, overflow of 64-bit storage.
Updated the implementation to go with approach (2) for qede->flags.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fixes: 5e7baf0fcb2a ("qed/qede: Multi CoS support.")
Signed-off-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The main motive of this patch is to lay down driver's
tc offload infrastructure in place.
With these changes tc can offload various supported flow
profiles (4 tuples, src-ip, dst-ip, l4 port) for the drop
action. Dropped flows statistic is a global counter for
all the offloaded flows for drop action and is populated
in ethtool statistics as common "gft_filter_drop".
Examples -
tc qdisc add dev p4p1 ingress
tc filter add dev p4p1 protocol ipv4 parent ffff: flower \
skip_sw ip_proto tcp dst_ip 192.168.40.200 action drop
tc filter add dev p4p1 protocol ipv4 parent ffff: flower \
skip_sw ip_proto udp src_ip 192.168.40.100 action drop
tc filter add dev p4p1 protocol ipv4 parent ffff: flower \
skip_sw ip_proto tcp src_ip 192.168.40.100 dst_ip 192.168.40.200 \
src_port 453 dst_port 876 action drop
tc filter add dev p4p1 protocol ipv4 parent ffff: flower \
skip_sw ip_proto tcp dst_port 98 action drop
Signed-off-by: Manish Chopra <manish.chopra@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds support for tc mqprio offload,
using this different traffic classes on the adapter
can be utilized based on configured priority to tc map.
For example -
tc qdisc add dev eth0 root mqprio num_tc 4 map 0 1 2 3
This will cause SKBs with priority 0,1,2,3 to transmit
over tc 0,1,2,3 hardware queues respectively.
Signed-off-by: Manish Chopra <manish.chopra@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds driver changes for capturing the link change count in
ethtool statistics display.
Please consider applying this to "net-next".
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With this patch, User can configure for the supported
flows to be dropped. Added a stat "gft_filter_drop"
as well to be populated in ethtool for the dropped flows.
For example -
ethtool -N p5p1 flow-type udp4 dst-port 8000 action -1
ethtool -N p5p1 flow-type tcp4 scr-ip 192.168.8.1 action -1
Signed-off-by: Manish Chopra <manish.chopra@cavium.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds callbacks for providing the ethernet protocol driver TLVs.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
S390 bpf_jit.S is removed in net-next and had changes in 'net',
since that code isn't used any more take the removal.
TLS data structures split the TX and RX components in 'net-next',
put the new struct members from the bug fix in 'net' into the RX
part.
The 'net-next' tree had some reworking of how the ERSPAN code works in
the GRE tunneling code, overlapping with a one-line headroom
calculation fix in 'net'.
Overlapping changes in __sock_map_ctx_update_elem(), keep the bits
that read the prog members via READ_ONCE() into local variables
before using them.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch makes use of build_skb() throughout in driver's receieve
data path [HW gro flow and non HW gro flow]. With this, driver can
build skb directly from the page segments which are already mapped
to the hardware instead of allocating new SKB via netdev_alloc_skb()
and memcpy the data which is quite costly.
This really improves performance (keeping same or slight gain in rx
throughput) in terms of CPU utilization which is significantly reduced
[almost half] in non HW gro flow where for every incoming MTU sized
packet driver had to allocate skb, memcpy headers etc. Additionally
in that flow, it also gets rid of bunch of additional overheads
[eth_get_headlen() etc.] to split headers and data in the skb.
Tested with:
system: 2 sockets, 4 cores per socket, hyperthreading, 2x4x2=16 cores
iperf [server]: iperf -s
iperf [client]: iperf -c <server_ip> -t 500 -i 10 -P 32
HW GRO off – w/o build_skb(), throughput: 36.8 Gbits/sec
Average: CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle
Average: all 0.59 0.00 32.93 0.00 0.00 43.07 0.00 0.00 23.42
HW GRO off - with build_skb(), throughput: 36.9 Gbits/sec
Average: CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle
Average: all 0.70 0.00 31.70 0.00 0.00 25.68 0.00 0.00 41.92
HW GRO on - w/o build_skb(), throughput: 36.9 Gbits/sec
Average: CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle
Average: all 0.86 0.00 24.14 0.00 0.00 6.59 0.00 0.00 68.41
HW GRO on - with build_skb(), throughput: 37.5 Gbits/sec
Average: CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle
Average: all 0.87 0.00 23.75 0.00 0.00 6.19 0.00 0.00 69.19
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Manish Chopra <manish.chopra@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
