summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/qlogic/qed/qed_hsi.h
AgeCommit message (Collapse)Author
2025-04-15qed: Remove unused qed_calc_*_ctx_validation functionsDr. David Alan Gilbert
qed_calc_session_ctx_validation() and qed_calc_task_ctx_validation() were added as part of 2017's commit da09091732ae ("qed*: Utilize FW 8.33.1.0") but have remained unused. Remove them. This leaves; con_region_offsets[], task_region_offsets[], cdu_crc8_table and qed_calc_cdu_validation_byte() unused. Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://patch.msgid.link/20250414005247.341243-3-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-15qed: Remove unused qed_memset_*ctx functionsDr. David Alan Gilbert
qed_memset_session_ctx() and qed_memset_task_ctx() were added in 2017 as part of commit da09091732ae ("qed*: Utilize FW 8.33.1.0") but have not been used. Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://patch.msgid.link/20250414005247.341243-2-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-02qed: Enhance rammod debug prints to provide pretty detailsPrabhakar Kushwaha
Instead of printing numbers of protocol IDs and rammod commands, enhance debug prints to provide names. s_protocol_types[] and s_ramrod_cmd_ids arrays[] are added to support along with APIs. Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-04qed: Update qed_hsi.h for fw 8.59.1.0Prabhakar Kushwaha
The qed_hsi.h has been updated to support new FW version 8.59.1.0 with changes. - Updates FW HSI (Hardware Software interface) structures. - Addition/update in function declaration and defines as per HSI. - Add generic infrastructure for FW error reporting as part of common event queue handling. - Move malicious VF error reporting to FW error reporting infrastructure. - Move consolidation queue initialization from FW context to ramrod message. qed_hsi.h header file changes lead to change in many files to ensure compilation. This patch also fixes the existing checkpatch warnings and few important checks. Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-04qed: Update common_hsi for FW ver 8.59.1.0Prabhakar Kushwaha
The common_hsi.h has been updated for FW version 8.59.1.0 with below changes. - FW and Tools version. - New structures related to search table, packet duplication. - Structure for doorbell address for legacy mode without DEM. - Enhanced union rdma_eqe_data for RoCE Suspend Event Data. - New defines. This patch also fixes the existing checkpatch warnings and few important checks. Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-04qed: Split huge qed_hsi.h header fileOmkar Kulkarni
The qed_hsi.h is a huge header file containing HSI (Hardware Software Interface) definitions of storm memory access, debug related, general and management firmware specific. In order to have a better code-organization HSI definition, this patch split the code across multiple files, i.e. - storm memory access HSI : qed_iro_hsi.h - debug related HSI : qed_dbg_hsi.h - Management firmware HSI : qed_mfg_hsi.h - General HSI : qed_hsi.h In addition, this patch also fixes existing checkpatch warnings and few important checks. Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-04qed: Remove e4_ and _e4 from FW HSIShai Malin
The existing qed/qede/qedr/qedi/qedf code uses chip-specific naming in structures, functions, variables and defines in FW HSI (Hardware Software Interface). The new FW version introduced a generic naming convention in HSI in-which the same code will be used across different versions for simpler maintainability. It also eases in providing support for new features. With this patch every "_e4" or "e4_" prefix or suffix is not needed anymore and it will be removed. Reviewed-by: Manish Rangankar <mrangankar@marvell.com> Reviewed-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-04qed: Fix kernel-doc warningsPrabhakar Kushwaha
This patch fixes all the qed and qede kernel-doc warnings according to the guidelines that are described in Documentation/doc-guide/kernel-doc.rst. Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-03qed: Add NVMeTCP Offload PF Level FW and HW HSIShai Malin
This patch introduces the NVMeTCP device and PF level HSI and HSI functionality in order to initialize and interact with the HW device. The patch also adds qed NVMeTCP personality. This patch is based on the qede, qedr, qedi, qedf drivers HSI. Acked-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Dean Balandin <dbalandin@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Michal Kalderon <mkalderon@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-03qed: Add TCP_ULP FW resource layoutOmkar Kulkarni
Add TCP_ULP as a storage common TCP offload FW resource layout. This will be used by the core driver (QED) for both the NVMeTCP and iSCSI. Acked-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by: Michal Kalderon <mkalderon@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22net: qed_hsi.h: Avoid the use of one-element arrayGustavo A. R. Silva
One-element arrays are being deprecated[1]. Replace the one-element array with a simple value type '__le32 reserved1'[2], once it seems this is just a placeholder for alignment. [1] https://github.com/KSPP/linux/issues/79 [2] https://github.com/KSPP/linux/issues/86 Tested-by: kernel test robot <lkp@intel.com> Link: https://github.com/GustavoARSilva/linux-hardening/blob/master/cii/0-day/qed_hsi-20200718.md Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20qed: add support for the extended speed and FEC modesAlexander Lobakin
Add all necessary code (NVM parsing, MFW and Ethtool reports etc.) to support extended speed and FEC modes. These new modes are supported by the new boards revisions and newer MFW versions. Misc: correct port type for MEDIA_KR. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20qed: add missing loopback modesAlexander Lobakin
These modes are relevant only for several boards, but may be reported by MFW as well as the others. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20qed: add support for new port modesAlexander Lobakin
These ports ship on new boards revisions and are supported by newer firmware versions. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20qed: reformat several structures a bitAlexander Lobakin
Reformat a few nvm_cfg* structures (and partly qed_dev) prior to adding new fields and definitions. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20qed: add support for Forward Error CorrectionAlexander Lobakin
Add all necessary routines for reading supported FEC modes from NVM and querying FEC control to the MFW (if the running version supports it). Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20qed: reformat several structures a bitAlexander Lobakin
Prior to adding new fields and bitfields, reformat the related structures according to the Linux style (spaces to tabs, lowercase hex, indentation etc.). Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20qed: add support for multi-rate transceiversAlexander Lobakin
Set the corresponding advertised and supported link modes according to the detected transceiver type and device capabilities. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20qed: reformat public_port::transceiver_data a bitAlexander Lobakin
Prior to adding new bitfields, reformat the existing ones from spaces to tabs, and unify all hex values to lowercase. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06net: qed: sanitize BE/LE data processingAlexander Lobakin
Current code assumes that both host and device operates in Little Endian in lots of places. While this is true for x86 platform, this doesn't mean we should not care about this. This commit addresses all parts of the code that were pointed out by sparse checker. All operations with restricted (__be*/__le*) types are now protected with explicit from/to CPU conversions, even if they're noops on common setups. I'm sure there are more such places, but this implies a deeper code investigation, and is a subject for future works. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06net: qed: improve indentation of some parts of codeAlexander Lobakin
To not mix functional and stylistic changes, correct indentation of code that will be modified in the subsequent commits. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06net: qed: move static iro_arr[] out of header fileAlexander Lobakin
Static variables (and functions, unless they're inline) should not be declared in header files. Move the static array iro_arr[] from "qed_hsi.h" to the sole place where it's used, "qed_init_ops.c". This eliminates lots of warnings (42 of them actually) against W=1+: In file included from drivers/net/ethernet/qlogic/qed/qed.h:51:0, from drivers/net/ethernet/qlogic/qed/qed_ooo.c:40: drivers/net/ethernet/qlogic/qed/qed_hsi.h:4421:18: warning: 'iro_arr' defined but not used [-Wunused-const-variable=] static const u32 iro_arr[] = { ^~~~~~~ Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-30net: qed: update copyright yearsAlexander Lobakin
Set the actual copyright holder and years in all qed source files. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-30net: qed: convert to SPDX License IdentifiersAlexander Lobakin
QLogic QED drivers source code is dual licensed under GPL-2.0/BSD-3-Clause. Remove all the boilerplates in the existing code and replace it with the correct SPDX tag. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qed: introduce critical hardware error handlerIgor Russkikh
MCP may signal driver about generic critical failure. Driver has to collect mdump information (get_retain), it pushes that to logs and triggers generic notification on "hardware attention" event. Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qed: introduce critical fan failure handlerIgor Russkikh
Fan failure is sent by firmware, driver reacts on this error with newly introduced notification path. It will collect dump and shut down the device to prevent physical breakage Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: qed: critical err reporting to management firmwareIgor Russkikh
On various critical errors, notification handler should also report the err information into the management firmware. MFW can interact with server/motherboard backend agents - these are used by server manufacturers to monitor server HW health. Thus, it is important for driver to report on any faulty conditions Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27qed: FW 8.42.2.0 debug featuresMichal Kalderon
Add to debug dump more information on the platform it was collected from (pci func, path id). Provide human readable reg fifo erros. Removed static debug arrays from HSI Functions, and move them to the hwfn. Some structures were slightly changed (removing reserved chip id for example) which lead to many long initializations being modified with one parameter less during initialization. This leads to some long diffs that don't really change anything. Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27qed: Debug feature: ilt and mdumpMichal Kalderon
Part of the FW drop includes new debug capabilities implemented in the qed_debug file. This patch dumps additional information during ethtool -d for better debugging. The data dumped is the ilt (internal logical table) and information gathered by the management firmware incase there was a crash and driver was not able to extract the information (mdump). Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27qed: FW 8.42.2.0 Add fw overlay featureMichal Kalderon
This feature enables the FW to page out FW code when required Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27qed: FW 8.42.2.0 HSI changesMichal Kalderon
This patch contains several HSI changes. The changes are part of features like RDMA VF and OVS, the patch also contains a fix to how the init code determines if the dmae is ready to be used. Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27qed: FW 8.42.2.0 iscsi/fcoe changesMichal Kalderon
- Remove struct iscsi_slow_path_hdr and field fw_cid from several structs - Remove struct iscsi_spe_func_dstry - Remove fields pbe_page_size_log and pbl_page_size_log from struct iscsi_conn_offload_param Signed-off-by: Manish Rangankar <manish.rangankar@marvell.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@marvell.com> Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27qed: FW 8.42.2.0 Additional ll2 typeMichal Kalderon
LL2 queues were a limited resource due to FW constraints. This FW introduced a new resource which is a context based ll2 queue (memory on host). The additional ll2 queues are required for RDMA SRIOV. The code refers to the previous ll2 queues as ram-based or legacy, and the new queues as ctx-based. This change decreased the "legacy" ram-based queues therefore the first ll2 queue used for iWARP was converted to the ctx-based ll2 queue. This feature also exposed a bug in the DIRECT_REG_WR64 macro implementation which didn't have an effect in other use cases. Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27qed: Use dmae to write to widebus registers in fw_funcsMichal Kalderon
There are several wide-bus registers written to by the fw_funcs that require using the dmae for atomicity. Therefore using the dmae channel functionality was added to the fw_funcs file, since the code is very similar to the previously used code, the structures used were moved to qed_hsi. Due to FW conventions, the names of the flags in the struct changed. Since this required slight modification in the places that set the flags the code was modified to use GET/SET FIELD macros. Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27qed: FW 8.42.2.0 Queue Manager changesMichal Kalderon
This patch contains changes in initialization and usage of the QM blocks. Instead of setting a rate limiter per vport the rate limiters are now a global resource and set independentaly. The patch also contains a field name change: vport_wfq which is part of vport_params was renamed to wfq as the vport prefix is redundant. Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27qed: FW 8.42.2.0 Expose new registers and change windowsMichal Kalderon
This patch contains register initialization related changes. - Modifications to the runtime offsets - these are defines used by the driver or firmware functions to set values that are used by the initialization functions to set device register values. - Global window values changes to provide different device register ranges. - Additional device registers addresses were added to the register file, used in later stages. Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27qed: FW 8.42.2.0 Internal ram offsets modificationsMichal Kalderon
IRO stands for internal RAM offsets. Updating the FW binary produces different iro offsets. This file contains the different values, and a new representation of the values. Update the FW version Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31qed: Add APIs for configuring grc dump config flags.Sudarsana Reddy Kalluru
The patch adds driver support for configuring the grc dump config flags. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-15qed: Add API for configuring NVM attributes.Sudarsana Reddy Kalluru
The patch adds API for configuring the NVM config attributes using Management FW (MFW) interfaces. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-26qed: Add llh ppfid interface and 100g support for offload protocolsMichal Kalderon
This patch refactors the current llh implementation. It exposes a hw resource called ppfid (port-pfid) and implements an API for configuring the resource. Default configuration which was used until now limited the number of filters per PF and did not support engine affinity per protocol. The new API enables allocating more filter rules per PF and enables affinitizing protocol packets to a certain engine which enables full 100g protocol offload support. Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08qed: Add API for SmartAN query.Sudarsana Reddy Kalluru
The patch adds driver interface to read the SmartAN capability from management firmware. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Michal Kalderon <mkalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-28qed: Add infrastructure for error detection and recoveryTomer Tayar
This patch adds the detection and handling of a parity error ("process kill event"), including the update of the protocol drivers, and the prevention of any HW access that will lead to device access towards the host while recovery is in progress. It also provides the means for the protocol drivers to trigger a recovery process on their decision. Signed-off-by: Tomer Tayar <tomer.tayar@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Lots of conflicts, by happily all cases of overlapping changes, parallel adds, things of that nature. Thanks to Stephen Rothwell, Saeed Mahameed, and others for their guidance in these resolutions. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-13qed: Fix command number mismatch between driver and the mfwSudarsana Reddy Kalluru
The value for OEM_CFG_UPDATE command differs between driver and the Management firmware (mfw). Fix this gap with adding a reserved field. Fixes: cac6f691546b ("qed: Add support for Unified Fabric Port.") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27qed: Add support for MBI upgrade over MFW.Sudarsana Reddy Kalluru
The patch adds driver support for MBI image update through MFW. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-16qed: Added supported transceiver modes, speed capability and board config to ↵Rahul Verma
HSI. Added transceiver modes with different speed and media type, speed capability and supported board types in HSI, which will be utilizing to display correct specification of link modes and speed type. Signed-off-by: Rahul Verma <Rahul.Verma@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10qed: Add support for virtual link.Sudarsana Reddy Kalluru
Currently driver registers to physical link notifications (of the device) from Management firmware (MFW). Driver doesn't get notified if there's a change in the virtual link e.g., link-flap on the peer PF interface. Virtual link indication from MFW reflects the per PF link status instead of the physical link. The patch adds driver support for, - Advertising the virtual link support to MFW. - Handling the virtual link notification from MFW. Please consider applying it to 'net-next'. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Minor conflict in net/core/rtnetlink.c, David Ahern's bug fix in 'net' overlapped the renaming of a netlink attribute in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-02qed: Add driver support for 20G link speed.Sudarsana Reddy Kalluru
Add driver support for configuring/reading the 20G link speed. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-28qed: Fix shmem structure inconsistency between driver and the mfw.Sudarsana Reddy Kalluru
The structure shared between driver and the management FW (mfw) differ in sizes. This would lead to issues when driver try to access the structure members which are not-aligned with the mfw copy e.g., data_ptr usage in the case of mfw_tlv request. Align the driver structure with mfw copy, add reserved field(s) to driver structure for the members not used by the driver. Fixes: dd006921d67f ("qed: Add MFW interfaces for TLV request support.) Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 21:24:09 +0000