summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/marvell
AgeCommit message (Collapse)Author
2024-11-13octeontx2-pf: Add basic net_device_opsGeetha sowjanya
Implements basic set of net_device_ops. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-13octeontx2-pf: Create representor netdevGeetha sowjanya
Adds initial devlink support to set/get the switchdev mode. Representor netdevs are created for each rvu devices when the switch mode is set to 'switchdev'. These netdevs are be used to control and configure VFs. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-13octeontx2-pf: RVU representor driverGeetha sowjanya
Adds basic driver for the RVU representor. Driver on probe does pci specific initialization and does hw resources configuration. Introduces RVU_ESWITCH kernel config to enable/disable the driver. Representor and NIC shares the code but representors netdev support subset of NIC functionality. Hence "otx2_rep_dev" API helps to skip the features initialization that are not supported by the representors. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-11octeontx2-af: Knobs for NPC default rule countersLinu Cherian
Add devlink knobs to enable/disable counters on NPC default rule entries. Sample command to enable default rule counters: devlink dev param set <dev> name npc_def_rule_cntr value true cmode runtime Sample command to read the counter: cat /sys/kernel/debug/cn10k/npc/mcam_rules Signed-off-by: Linu Cherian <lcherian@marvell.com> Link: https://patch.msgid.link/20241105125620.2114301-3-lcherian@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-11octeontx2-af: Refactor few NPC mcam APIsLinu Cherian
Introduce lowlevel variant of rvu_mcam_remove/add_counter_from/to_rule for better code reuse, which assumes necessary locks are taken at higher level. These low level functions would be used for implementing default rule counter APIs in the subsequent patch. Signed-off-by: Linu Cherian <lcherian@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241105125620.2114301-2-lcherian@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-03dim: pass dim_sample to net_dim() by referenceCaleb Sander Mateos
net_dim() is currently passed a struct dim_sample argument by value. struct dim_sample is 24 bytes. Since this is greater 16 bytes, x86-64 passes it on the stack. All callers have already initialized dim_sample on the stack, so passing it by value requires pushing a duplicated copy to the stack. Either witing to the stack and immediately reading it, or perhaps dereferencing addresses relative to the stack pointer in a chain of push instructions, seems to perform quite poorly. In a heavy TCP workload, mlx5e_handle_rx_dim() consumes 3% of CPU time, 94% of which is attributed to the first push instruction to copy dim_sample on the stack for the call to net_dim(): // Call ktime_get() 0.26 |4ead2: call 4ead7 <mlx5e_handle_rx_dim+0x47> // Pass the address of struct dim in %rdi |4ead7: lea 0x3d0(%rbx),%rdi // Set dim_sample.pkt_ctr |4eade: mov %r13d,0x8(%rsp) // Set dim_sample.byte_ctr |4eae3: mov %r12d,0xc(%rsp) // Set dim_sample.event_ctr 0.15 |4eae8: mov %bp,0x10(%rsp) // Duplicate dim_sample on the stack 94.16 |4eaed: push 0x10(%rsp) 2.79 |4eaf1: push 0x10(%rsp) 0.07 |4eaf5: push %rax // Call net_dim() 0.21 |4eaf6: call 4eafb <mlx5e_handle_rx_dim+0x6b> To allow the caller to reuse the struct dim_sample already on the stack, pass the struct dim_sample by reference to net_dim(). Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Arthur Kiyanovski <akiyano@amazon.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Link: https://patch.msgid.link/20241031002326.3426181-2-csander@purestorage.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-30octeontx2-pf: Move shared APIs to header fileGeetha sowjanya
Move mbox, hw resources and interrupt configuration functions to common header file. So, that they can be used later by the RVU representor driver. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241023161843.15543-5-gakula@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-30octeontx2-pf: Reuse PF max mtu valueGeetha sowjanya
Reuse the maximum support HW MTU value that is fetch during probe. Instead of fetching through mbox each time mtu is changed as the value is fixed for interface. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241023161843.15543-4-gakula@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-30octeontx2-pf: Add new APIs for queue memory alloc/free.Geetha sowjanya
Group the queue(RX/TX/CQ) memory allocation and free code to single APIs. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241023161843.15543-3-gakula@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-30octeontx2-pf: Define common API for HW resources configurationGeetha sowjanya
Define new API "otx2_init_rsrc" and move the HW blocks NIX/NPA resources configuration code under this API. So, that it can be used by the RVU representor driver that has similar resources of RVU NIC. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Jiri Pirko <jiri@resnulli.us> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241023161843.15543-2-gakula@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-29net: marvell: use ethtool string helpersRosen Penev
The latter is the preferred way to copy ethtool strings. Avoids manually incrementing the pointer. Cleans up the code quite well. Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241024195833.176843-1-rosenp@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Cross-merge networking fixes after downstream PR. No conflicts and no adjacent changes. Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-22net: mv643xx: use ethtool_putsRosen Penev
Allows simplifying get_strings and avoids manual pointer manipulation. Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Message-ID: <20241018200522.12506-1-rosenp@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2024-10-22octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_dcbnl.cDipendra Khadka
Add error pointer check after calling otx2_mbox_get_rsp(). Fixes: 8e67558177f8 ("octeontx2-pf: PFC config support with DCBx") Signed-off-by: Dipendra Khadka <kdipendra88@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2024-10-22octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_dmac_flt.cDipendra Khadka
Add error pointer checks after calling otx2_mbox_get_rsp(). Fixes: 79d2be385e9e ("octeontx2-pf: offload DMAC filters to CGX/RPM block") Fixes: fa5e0ccb8f3a ("octeontx2-pf: Add support for exact match table.") Signed-off-by: Dipendra Khadka <kdipendra88@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2024-10-22octeontx2-pf: handle otx2_mbox_get_rsp errors in cn10k.cDipendra Khadka
Add error pointer check after calling otx2_mbox_get_rsp(). Fixes: 2ca89a2c3752 ("octeontx2-pf: TC_MATCHALL ingress ratelimiting offload") Signed-off-by: Dipendra Khadka <kdipendra88@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2024-10-22octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_flows.cDipendra Khadka
Adding error pointer check after calling otx2_mbox_get_rsp(). Fixes: 9917060fc30a ("octeontx2-pf: Cleanup flow rule management") Fixes: f0a1913f8a6f ("octeontx2-pf: Add support for ethtool ntuple filters") Fixes: 674b3e164238 ("octeontx2-pf: Add additional checks while configuring ucast/bcast/mcast rules") Signed-off-by: Dipendra Khadka <kdipendra88@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2024-10-22octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_ethtool.cDipendra Khadka
Add error pointer check after calling otx2_mbox_get_rsp(). Fixes: 75f36270990c ("octeontx2-pf: Support to enable/disable pause frames via ethtool") Fixes: d0cf9503e908 ("octeontx2-pf: ethtool fec mode support") Signed-off-by: Dipendra Khadka <kdipendra88@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2024-10-22octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_common.cDipendra Khadka
Add error pointer check after calling otx2_mbox_get_rsp(). Fixes: ab58a416c93f ("octeontx2-pf: cn10k: Get max mtu supported from admin function") Signed-off-by: Dipendra Khadka <kdipendra88@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2024-10-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Cross-merge networking fixes after downstream PR (net-6.12-rc4). Conflicts: 107a034d5c1e ("net/mlx5: qos: Store rate groups in a qos domain") 1da9cfd6c41c ("net/mlx5: Unregister notifier on eswitch init failure") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-19octeon_ep: Add SKB allocation failures handling in __octep_oq_process_rx()Aleksandr Mishin
build_skb() returns NULL in case of a memory allocation failure so handle it inside __octep_oq_process_rx() to avoid NULL pointer dereference. __octep_oq_process_rx() is called during NAPI polling by the driver. If skb allocation fails, keep on pulling packets out of the Rx DMA queue: we shouldn't break the polling immediately and thus falsely indicate to the octep_napi_poll() that the Rx pressure is going down. As there is no associated skb in this case, don't process the packets and don't push them up the network stack - they are skipped. Helper function is implemented to unmmap/flush all the fragment buffers used by the dropped packet. 'alloc_failures' counter is incremented to mark the skb allocation error in driver statistics. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 37d79d059606 ("octeon_ep: add Tx/Rx processing and interrupt support") Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2024-10-19octeon_ep: Implement helper for iterating packets in Rx queueAleksandr Mishin
The common code with some packet and index manipulations is extracted and moved to newly implemented helper to make the code more readable and avoid duplication. This is a preparation for skb allocation failure handling. Found by Linux Verification Center (linuxtesting.org) with SVACE. Suggested-by: Simon Horman <horms@kernel.org> Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2024-10-15octeontx2-af: Fix potential integer overflows on integer shiftsColin Ian King
The left shift int 32 bit integer constants 1 is evaluated using 32 bit arithmetic and then assigned to a 64 bit unsigned integer. In the case where the shift is 32 or more this can lead to an overflow. Avoid this by shifting using the BIT_ULL macro instead. Fixes: 019aba04f08c ("octeontx2-af: Modify SMQ flush sequence to drop packets") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/20241010154519.768785-1-colin.i.king@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-14net: mvneta: use ethtool_putsRosen Penev
Allows simplifying get_strings and avoids manual pointer manipulation. Tested on Turris Omnia. Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Link: https://patch.msgid.link/20241011195955.7065-1-rosenp@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-04net: ethernet: Switch back to struct platform_driver::remove()Uwe Kleine-König
After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/net/ethernet to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://patch.msgid.link/18f7c585a1a8a8ac8b03a2fca7de19bd5c52ac2b.1727949050.git.u.kleine-koenig@baylibre.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-04octeontx2-af: Change block parameter to const pointer in get_lf_str_listRiyan Dhiman
Convert struct rvu_block block to const struct rvu_block *block in get_lf_str_list() function parameter. This improves efficiency by avoiding structure copying and reflects the function's read-only access to block. Signed-off-by: Riyan Dhiman <riyandhiman14@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241001110542.5404-2-riyandhiman14@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-04net: mv643xx: fix wrong devm_clk_get usageRosen Penev
This clock should be optional. In addition, PTR_ERR can be -EPROBE_DEFER in which case it should return. devm_clk_get_optional_enabled also allows removing explicit clock enable and disable calls. Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240930202951.297737-3-rosenp@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-04net: mv643xx: use devm_platform_ioremap_resourceRosen Penev
This combines multiple steps in one function. Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240930202951.297737-2-rosenp@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-03net: marvell: mvmdio: use clk_get_optionalRosen Penev
The code seems to be handling EPROBE_DEFER explicitly and if there's no error, enables the clock. clk_get_optional exists for that. Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240930211628.330703-1-rosenp@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-17Merge tag 'timers-core-2024-09-16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Core: - Overhaul of posix-timers in preparation of removing the workaround for periodic timers which have signal delivery ignored. - Remove the historical extra jiffie in msleep() msleep() adds an extra jiffie to the timeout value to ensure minimal sleep time. The timer wheel ensures minimal sleep time since the large rewrite to a non-cascading wheel, but the extra jiffie in msleep() remained unnoticed. Remove it. - Make the timer slack handling correct for realtime tasks. The procfs interface is inconsistent and does neither reflect reality nor conforms to the man page. Show the correct 0 slack for real time tasks and enforce it at the core level instead of having inconsistent individual checks in various timer setup functions. - The usual set of updates and enhancements all over the place. Drivers: - Allow the ACPI PM timer to be turned off during suspend - No new drivers - The usual updates and enhancements in various drivers" * tag 'timers-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits) ntp: Make sure RTC is synchronized when time goes backwards treewide: Fix wrong singular form of jiffies in comments cpu: Use already existing usleep_range() timers: Rename next_expiry_recalc() to be unique platform/x86:intel/pmc: Fix comment for the pmc_core_acpi_pm_timer_suspend_resume function clocksource/drivers/jcore: Use request_percpu_irq() clocksource/drivers/cadence-ttc: Add missing clk_disable_unprepare in ttc_setup_clockevent clocksource/drivers/asm9260: Add missing clk_disable_unprepare in asm9260_timer_init clocksource/drivers/qcom: Add missing iounmap() on errors in msm_dt_timer_init() clocksource/drivers/ingenic: Use devm_clk_get_enabled() helpers platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended clocksource: acpi_pm: Add external callback for suspend/resume clocksource/drivers/arm_arch_timer: Using for_each_available_child_of_node_scoped() dt-bindings: timer: rockchip: Add rk3576 compatible timers: Annotate possible non critical data race of next_expiry timers: Remove historical extra jiffie for timeout in msleep() hrtimer: Use and report correct timerslack values for realtime tasks hrtimer: Annotate hrtimer_cpu_base_.*_expiry() for sparse. timers: Add sparse annotation for timer_sync_wait_running(). signal: Replace BUG_ON()s ...
2024-09-13octeontx2-af: debugfs: Add Channel info to RPM mapLinu Cherian
Display channel info in the RPM map debugfs output. With this, cat /sys/kernel/debug/cn10k/rvu_pf_rpm_map would display channel number for each device in addition to the existing data. Sample output: PCI dev RVU PF Func NIX block rpm LMAC CHAN 0002:02:00.0 0x400 NIX0 rpm0 LMAC0 256 Signed-off-by: Linu Cherian <lcherian@marvell.com> Link: https://patch.msgid.link/20240912161450.164402-3-lcherian@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts (sort of) and no adjacent changes. This merge reverts commit b3c9e65eb227 ("net: hsr: remove seqnr_lock") from net, as it was superseded by commit 430d67bdcb04 ("net: hsr: Use the seqnr lock for frames received via interlink port.") in net-next. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10Merge branch 'linus' into timers/coreThomas Gleixner
To update with the latest fixes.
2024-09-10octeontx2-af: Modify SMQ flush sequence to drop packetsNaveen Mamindlapalli
The current implementation of SMQ flush sequence waits for the packets in the TM pipeline to be transmitted out of the link. This sequence doesn't succeed in HW when there is any issue with link such as lack of link credits, link down or any other traffic that is fully occupying the link bandwidth (QoS). This patch modifies the SMQ flush sequence to drop the packets after TL1 level (SQM) instead of polling for the packets to be sent out of RPM/CGX link. Fixes: 5d9b976d4480 ("octeontx2-af: Support fixed transmit scheduler topology") Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Reviewed-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Link: https://patch.msgid.link/20240906045838.1620308-1-naveenm@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-08treewide: Fix wrong singular form of jiffies in commentsAnna-Maria Behnsen
There are several comments all over the place, which uses a wrong singular form of jiffies. Replace 'jiffie' by 'jiffy'. No functional change. Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k Link: https://lore.kernel.org/all/20240904-devel-anna-maria-b4-timers-flseep-v1-3-e98760256370@linutronix.de
2024-09-06octeontx2-pf: Make iplen __be16 in otx2_sqe_add_ext()Simon Horman
In otx2_sqe_add_ext() iplen is used to hold a 16-bit big-endian value, but it's type is u16, indicating a host byte order integer. Address this mismatch by changing the type of iplen to __be16. Flagged by Sparse as: .../otx2_txrx.c:699:31: warning: incorrect type in assignment (different base types) .../otx2_txrx.c:699:31: expected unsigned short [usertype] iplen .../otx2_txrx.c:699:31: got restricted __be16 [usertype] .../otx2_txrx.c:701:54: warning: incorrect type in assignment (different base types) .../otx2_txrx.c:701:54: expected restricted __be16 [usertype] tot_len .../otx2_txrx.c:701:54: got unsigned short [usertype] iplen .../otx2_txrx.c:704:60: warning: incorrect type in assignment (different base types) .../otx2_txrx.c:704:60: expected restricted __be16 [usertype] payload_len .../otx2_txrx.c:704:60: got unsigned short [usertype] iplen Introduced in commit dc1a9bf2c816 ("octeontx2-pf: Add UDP segmentation offload support") No functional change intended. Compile tested only by author. Tested-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240904-octeontx2-sparse-v2-2-14f2305fe4b2@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-06octeontx2-af: Pass string literal as format argument of alloc_workqueue()Simon Horman
Recently I noticed that both gcc-14 and clang-18 report that passing a non-string literal as the format argument of alloc_workqueue() is potentially insecure. E.g. clang-18 says: .../rvu.c:2493:32: warning: format string is not a string literal (potentially insecure) [-Wformat-security] 2493 | mw->mbox_wq = alloc_workqueue(name, | ^~~~ .../rvu.c:2493:32: note: treat the string as an argument to avoid this 2493 | mw->mbox_wq = alloc_workqueue(name, | ^ | "%s", It is always the case where the contents of name is safe to pass as the format argument. That is, in my understanding, it never contains any format escape sequences. But, it seems better to be safe than sorry. And, as a bonus, compiler output becomes less verbose by addressing this issue as suggested by clang-18. Compile tested only by author. Tested-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240904-octeontx2-sparse-v2-1-14f2305fe4b2@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-03net: mvpp2: Remove setting of RX software timestampGal Pressman
The responsibility for reporting of RX software timestamp has moved to the core layer (see __ethtool_get_ts_info()), remove usage from the device drivers. Reviewed-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Marcin Wojtas <marcin.s.wojtas@gmail.com> Link: https://patch.msgid.link/20240901112803.212753-16-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-03octeontx2-pf: Remove setting of RX software timestampGal Pressman
The responsibility for reporting of RX software timestamp has moved to the core layer (see __ethtool_get_ts_info()), remove usage from the device drivers. Reviewed-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com> Link: https://patch.msgid.link/20240901112803.212753-15-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-03net: mv643xx_eth: Simplify with scoped for each OF child loopJinjie Ruan
Use scoped for_each_available_child_of_node_scoped() when iterating over device nodes to make code a bit simpler. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-03netdev_features: convert NETIF_F_NETNS_LOCAL to dev->netns_localAlexander Lobakin
"Interface can't change network namespaces" is rather an attribute, not a feature, and it can't be changed via Ethtool. Make it a "cold" private flag instead of a netdev_feature and free one more bit. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-01octeontx2-af: configure default CPT credits for CN10KA B0Srujana Challa
The maximum CPT credits that RXC can use are now configurable on CN10KA B0 through a hardware CSR. This patch sets the default value to optimize peak performance, aligning it with other chip versions. Signed-off-by: Srujana Challa <schalla@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-01octeontx2-af: avoid RXC register access for CN10KBSrujana Challa
This patch modifies the driver to prevent access to RXC hardware registers on the CN10KB, as RXC is not available on this chip. Signed-off-by: Srujana Challa <schalla@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-01octeontx2-af: use dynamic interrupt vectors for CN10KSrujana Challa
This patch updates the driver to use a dynamic number of vectors instead of a hard-coded value. This change accommodates the CN10KB, which has 2 vectors, unlike the previously supported chips that have 3 vectors. Signed-off-by: Srujana Challa <schalla@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: drivers/net/ethernet/broadcom/bnxt/bnxt.h c948c0973df5 ("bnxt_en: Don't clear ntuple filters and rss contexts during ethtool ops") f2878cdeb754 ("bnxt_en: Add support to call FW to update a VNIC") Link: https://patch.msgid.link/20240822210125.1542769-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-22octeontx2-af: Fix CPT AF register offset calculationBharat Bhushan
Some CPT AF registers are per LF and others are global. Translation of PF/VF local LF slot number to actual LF slot number is required only for accessing perf LF registers. CPT AF global registers access do not require any LF slot number. Also, there is no reason CPT PF/VF to know actual lf's register offset. Without this fix microcode loading will fail, VFs cannot be created and hardware is not usable. Fixes: bc35e28af789 ("octeontx2-af: replace cpt slot with lf id on reg write") Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240821070558.1020101-1-bbhushan2@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-13net: mvneta: Use __be16 for l3_proto parameter of mvneta_txq_desc_csum()Simon Horman
The value passed as the l3_proto argument of mvneta_txq_desc_csum() is __be16. And mvneta_txq_desc_csum uses this parameter as a __be16 value. So use __be16 as the type for the parameter, rather than type with host byte order. Flagged by Sparse as: .../mvneta.c:1796:25: warning: restricted __be16 degrades to integer .../mvneta.c:1979:45: warning: incorrect type in argument 2 (different base types) .../mvneta.c:1979:45: expected int l3_proto .../mvneta.c:1979:45: got restricted __be16 [usertype] l3_proto No functional change intended. Flagged by Sparse. Signed-off-by: Simon Horman <horms@kernel.org> Reviewed-by: Marcin Wojtas <marcin.s.wojtas@gmail.com> Link: https://patch.msgid.link/20240812-mvneta-be16-v1-1-e1ea12234230@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-12eth: remove .cap_rss_ctx_supported from updated driversJakub Kicinski
Remove .cap_rss_ctx_supported from drivers which moved to the new API. This makes it easy to grep for drivers which still need to be converted. Reviewed-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-12eth: mvpp2: implement new RSS context APIJakub Kicinski
Implement the separate create/modify/delete ops for RSS. No problems with IDs - even tho RSS tables are per device the driver already seems to allocate IDs linearly per port. There's a translation table from per-port context ID to device context ID. mvpp2 doesn't have a key for the hash, it defaults to an empty/previous indir table. Note that there is no key at all, so we don't have to be concerned with reporting the wrong one (which is addressed by a patch later in the series). Compile-tested only. Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-11net: mvpp2: use device_for_each_child_node() to access device child nodesJavier Carrasco
The iterated nodes are direct children of the device node, and the `device_for_each_child_node()` macro accounts for child node availability. `fwnode_for_each_available_child_node()` is meant to access the child nodes of an fwnode, and therefore not direct child nodes of the device node. The child nodes within mvpp2_probe are not accessed outside the loops, and the scoped version of the macro can be used to automatically decrement the refcount on early exits. Use `device_for_each_child_node()` and its scoped variant to indicate device's direct child nodes. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 15:02:58 +0000