summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/idpf/virtchnl2.h
AgeCommit message (Collapse)Author
2025-07-18virtchnl2: add flow steering supportSudheer Mogilappagari
Add opcodes and corresponding message structure to add and delete flow steering rules. Flow steering enables configuration of rules to take an action or subset of actions based on a match criteria. Actions could be redirect to queue, redirect to queue group, drop packet or mark. Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Co-developed-by: Dinesh Kumar <dinesh.kumar@intel.com> Signed-off-by: Dinesh Kumar <dinesh.kumar@intel.com> Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-18virtchnl2: rename enum virtchnl2_cap_rssAhmed Zaki
The "enum virtchnl2_cap_rss" will be used for negotiating flow steering capabilities. Instead of adding a new enum, rename virtchnl2_cap_rss to virtchnl2_flow_types. Also rename the enum's constants. Flow steering will use this enum in the next patches. Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-14idpf: implement get LAN MMIO memory regionsJoshua Hay
The RDMA driver needs to map its own MMIO regions for the sake of performance, meaning the IDPF needs to avoid mapping portions of the BAR space. However, to be HW agnostic, the IDPF cannot assume where these are and must avoid mapping hard coded regions as much as possible. The IDPF maps the bare minimum to load and communicate with the control plane, i.e., the mailbox registers and the reset state registers. Because of how and when mailbox register offsets are initialized, it is easier to adjust the existing defines to be relative to the mailbox region starting address. Use a specific mailbox register write function that uses these relative offsets. The reset state register addresses are calculated the same way as for other registers, described below. The IDPF then calls a new virtchnl op to fetch a list of MMIO regions that it should map. The addresses for the registers in these regions are calculated by determining what region the register resides in, adjusting the offset to be relative to that region, and then adding the register's offset to that region's mapped address. If the new virtchnl op is not supported, the IDPF will fallback to mapping the whole bar. However, it will still map them as separate regions outside the mailbox and reset state registers. This way we can use the same logic in both cases to access the MMIO space. Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-14idpf: implement remaining IDC RDMA core callbacks and handlersJoshua Hay
Implement the idpf_idc_request_reset and idpf_idc_rdma_vc_send_sync callbacks for the rdma core auxiliary driver to issue reset events to the idpf and send (synchronous) virtchnl messages to the control plane respectively. Implement and plumb the reset handler for the opposite flow as well, i.e. when the idpf is resetiing and needs to notify the rdma core auxiliary driver. Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-14idpf: implement RDMA vport auxiliary dev create, init, and destroyJoshua Hay
Implement the functions to create, initialize, and destroy an RDMA vport auxiliary device. The vport aux dev creation is dependent on the core aux device to call idpf_idc_vport_dev_ctrl to signal that it is ready for vport aux devices. Implement that core callback to either create and initialize the vport aux dev or deinitialize. RDMA vport aux dev creation is also dependent on the control plane to tell us the vport is RDMA enabled. Add a flag in the create vport message to signal individual vport RDMA capabilities. Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-14idpf: use reserved RDMA vectors from control planeJoshua Hay
Fetch the number of reserved RDMA vectors from the control plane. Adjust the number of reserved LAN vectors if necessary. Adjust the minimum number of vectors the OS should reserve to include RDMA; and fail if the OS cannot reserve enough vectors for the minimum number of LAN and RDMA vectors required. Create a separate msix table for the reserved RDMA vectors, which will just get handed off to the RDMA core device to do with what it will. Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-05-16idpf: add Tx timestamp capabilities negotiationMilena Olech
Tx timestamp capabilities are negotiated for the uplink Vport. Driver receives information about the number of available Tx timestamp latches, the size of Tx timestamp value and the set of indexes used for Tx timestamping. Add function to get the Tx timestamp capabilities and parse the uplink vport flag. Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Co-developed-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Co-developed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Milena Olech <milena.olech@intel.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-05-16virtchnl: add PTP virtchnl definitionsMilena Olech
PTP capabilities are negotiated using virtchnl commands. There are two available modes of the PTP support: direct and mailbox. When the direct access to PTP resources is negotiated, virtchnl messages returns a set of registers that allow read/write directly. When the mailbox access to PTP resources is negotiated, virtchnl messages are used to access PTP clock and to read the timestamp values. Virtchnl API covers both modes and exposes a set of PTP capabilities. Using virtchnl API, the driver recognizes also HW abilities - maximum adjustment of the clock and the basic increment value. Additionally, API allows to configure the secondary mailbox, dedicated exclusively for PTP purposes. Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Milena Olech <milena.olech@intel.com> Tested-by: Mina Almasry <almasrymina@google.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-28idpf: sprinkle __counted_by{,_le}() in the virtchnl2 headerAlexander Lobakin
Both virtchnl2.h and its consumer idpf_virtchnl.c are very error-prone. There are 10 structures with flexible arrays at the end, but 9 of them has flex member counter in Little Endian. Make the code a bit more robust by applying __counted_by_le() to those 9. LE platforms is the main target for this driver, so they would receive additional protection. While we're here, add __counted_by() to virtchnl2_ptype::proto_id, as its counter is `u8` regardless of the Endianness. Compile test on x86_64 (LE) didn't reveal any new issues after applying the attributes. Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://lore.kernel.org/r/20240327142241.1745989-4-aleksander.lobakin@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-28idpf: make virtchnl2.h self-containedAlexander Lobakin
To ease maintaining of virtchnl2.h, which already is messy enough, make it self-contained by adding missing if_ether.h include due to %ETH_ALEN usage. At the same time, virtchnl2_lan_desc.h is not used anywhere in the file, so move this include to idpf_txrx.h to speed up C preprocessing. Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://lore.kernel.org/r/20240327142241.1745989-3-aleksander.lobakin@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01idpf: avoid compiler padding in virtchnl2_ptype structPavan Kumar Linga
In the arm random config file, kconfig option 'CONFIG_AEABI' is disabled which results in adding the compiler flag '-mabi=apcs-gnu'. This causes the compiler to add padding in virtchnl2_ptype structure to align it to 8 bytes, resulting in the following size check failure: include/linux/build_bug.h:78:41: error: static assertion failed: "(6) == sizeof(struct virtchnl2_ptype)" 78 | #define __static_assert(expr, msg, ...) _Static_assert(expr, msg) | ^~~~~~~~~~~~~~ include/linux/build_bug.h:77:34: note: in expansion of macro '__static_assert' 77 | #define static_assert(expr, ...) __static_assert(expr, ##__VA_ARGS__, #expr) | ^~~~~~~~~~~~~~~ drivers/net/ethernet/intel/idpf/virtchnl2.h:26:9: note: in expansion of macro 'static_assert' 26 | static_assert((n) == sizeof(struct X)) | ^~~~~~~~~~~~~ drivers/net/ethernet/intel/idpf/virtchnl2.h:982:1: note: in expansion of macro 'VIRTCHNL2_CHECK_STRUCT_LEN' 982 | VIRTCHNL2_CHECK_STRUCT_LEN(6, virtchnl2_ptype); | ^~~~~~~~~~~~~~~~~~~~~~~~~~ Avoid the compiler padding by using "__packed" structure attribute for the virtchnl2_ptype struct. Also align the structure by using "__aligned(2)" for better code optimization. Fixes: 0d7502a9b4a7 ("virtchnl: add virtchnl version 2 ops") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312220250.ufEm8doQ-lkp@intel.com Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240131222241.2087516-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-26idpf: avoid compiler introduced padding in virtchnl2_rss_key structPavan Kumar Linga
Size of the virtchnl2_rss_key struct should be 7 bytes but the compiler introduces a padding byte for the structure alignment. This results in idpf sending an additional byte of memory to the device control plane than the expected buffer size. As the control plane enforces virtchnl message size checks to validate the message, set RSS key message fails resulting in the driver load failure. Remove implicit compiler padding by using "__packed" structure attribute for the virtchnl2_rss_key struct. Also there is no need to use __DECLARE_FLEX_ARRAY macro for the 'key_flex' struct field. So drop it. Fixes: 0d7502a9b4a7 ("virtchnl: add virtchnl version 2 ops") Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Scott Register <scott.register@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-13virtchnl: add virtchnl version 2 opsPavan Kumar Linga
Virtchnl version 1 is an interface used by the current generation of foundational NICs to negotiate the capabilities and configure the HW resources such as queues, vectors, RSS LUT, etc between the PF and VF drivers. It is not extensible to enable new features supported in the next generation of NICs/IPUs and to negotiate descriptor types, packet types and register offsets. To overcome the limitations of the existing interface, introduce the virtchnl version 2 and add the necessary opcodes, structures, definitions, and descriptor formats. The driver also learns the data queue and other register offsets to use instead of hardcoding them. The advantage of this approach is that it gives the flexibility to modify the register offsets if needed, restrict the use of certain descriptor types and negotiate the supported packet types. Co-developed-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Alan Brady <alan.brady@intel.com> Co-developed-by: Joshua Hay <joshua.a.hay@intel.com> Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Co-developed-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Madhu Chittim <madhu.chittim@intel.com> Co-developed-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Phani Burra <phani.r.burra@intel.com> Co-developed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>