linux/linux-stable.git - Linux kernel stable tree

Age	Commit message (Collapse)	Author
2025-07-14	idpf: implement get LAN MMIO memory regions	Joshua Hay
	The RDMA driver needs to map its own MMIO regions for the sake of performance, meaning the IDPF needs to avoid mapping portions of the BAR space. However, to be HW agnostic, the IDPF cannot assume where these are and must avoid mapping hard coded regions as much as possible. The IDPF maps the bare minimum to load and communicate with the control plane, i.e., the mailbox registers and the reset state registers. Because of how and when mailbox register offsets are initialized, it is easier to adjust the existing defines to be relative to the mailbox region starting address. Use a specific mailbox register write function that uses these relative offsets. The reset state register addresses are calculated the same way as for other registers, described below. The IDPF then calls a new virtchnl op to fetch a list of MMIO regions that it should map. The addresses for the registers in these regions are calculated by determining what region the register resides in, adjusting the offset to be relative to that region, and then adding the register's offset to that region's mapped address. If the new virtchnl op is not supported, the IDPF will fallback to mapping the whole bar. However, it will still map them as separate regions outside the mailbox and reset state registers. This way we can use the same logic in both cases to access the MMIO space. Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-13	idpf: add controlq init and reset checks	Joshua Hay
	At the end of the probe, initialize and schedule the event workqueue. It calls the hard reset function where reset checks are done to find if the device is out of the reset. Control queue initialization and the necessary control queue support is added. Introduce function pointers for the register operations which are different between PF and VF devices. Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Co-developed-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Alan Brady <alan.brady@intel.com> Co-developed-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Madhu Chittim <madhu.chittim@intel.com> Co-developed-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Phani Burra <phani.r.burra@intel.com> Co-developed-by: Shailendra Bhatnagar <shailendra.bhatnagar@intel.com> Signed-off-by: Shailendra Bhatnagar <shailendra.bhatnagar@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Co-developed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-13	idpf: add module register and probe functionality	Phani Burra
	Add the required support to register IDPF PCI driver, as well as probe and remove call backs. Enable the PCI device and request the kernel to reserve the memory resources that will be used by the driver. Finally map the BAR0 address space. Signed-off-by: Phani Burra <phani.r.burra@intel.com> Co-developed-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Alan Brady <alan.brady@intel.com> Co-developed-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Madhu Chittim <madhu.chittim@intel.com> Co-developed-by: Shailendra Bhatnagar <shailendra.bhatnagar@intel.com> Signed-off-by: Shailendra Bhatnagar <shailendra.bhatnagar@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Co-developed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>