summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/e1000e/ich8lan.c
AgeCommit message (Collapse)Author
9 dayse1000e: disregard NVM checksum on tgp when valid checksum bit is not setJacek Kowalski
As described by Vitaly Lifshits: > Starting from Tiger Lake, LAN NVM is locked for writes by SW, so the > driver cannot perform checksum validation and correction. This means > that all NVM images must leave the factory with correct checksum and > checksum valid bit set. Since Tiger Lake devices were the first to have > this lock, some systems in the field did not meet this requirement. > Therefore, for these transitional devices we skip checksum update and > verification, if the valid bit is not set. Signed-off-by: Jacek Kowalski <jacek@jacekk.info> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Fixes: 4051f68318ca9 ("e1000e: Do not take care about recovery NVM checksum") Cc: stable@vger.kernel.org Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-04-02e1000e: change k1 configuration on MTP and later platformsVitaly Lifshits
Starting from Meteor Lake, the Kumeran interface between the integrated MAC and the I219 PHY works at a different frequency. This causes sporadic MDI errors when accessing the PHY, and in rare circumstances could lead to packet corruption. To overcome this, introduce minor changes to the Kumeran idle state (K1) parameters during device initialization. Hardware reset reverts this configuration, therefore it needs to be applied in a few places. Fixes: cc23f4f0b6b9 ("e1000e: Add support for Meteor Lake") Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-11-04e1000e: Remove Meteor Lake SMBUS workaroundsVitaly Lifshits
This is a partial revert to commit 76a0a3f9cc2f ("e1000e: fix force smbus during suspend flow"). That commit fixed a sporadic PHY access issue but introduced a regression in runtime suspend flows. The original issue on Meteor Lake systems was rare in terms of the reproduction rate and the number of the systems affected. After the integration of commit 0a6ad4d9e169 ("e1000e: avoid failing the system during pm_suspend"), PHY access loss can no longer cause a system-level suspend failure. As it only occurs when the LAN cable is disconnected, and is recovered during system resume flow. Therefore, its functional impact is low, and the priority is given to stabilizing runtime suspend. Fixes: 76a0a3f9cc2f ("e1000e: fix force smbus during suspend flow") Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-07-10e1000e: fix force smbus during suspend flowVitaly Lifshits
Commit 861e8086029e ("e1000e: move force SMBUS from enable ulp function to avoid PHY loss issue") resolved a PHY access loss during suspend on Meteor Lake consumer platforms, but it affected corporate systems incorrectly. A better fix, working for both consumer and corporate systems, was proposed in commit bfd546a552e1 ("e1000e: move force SMBUS near the end of enable_ulp function"). However, it introduced a regression on older devices, such as [8086:15B8], [8086:15F9], [8086:15BE]. This patch aims to fix the secondary regression, by limiting the scope of the changes to Meteor Lake platforms only. Fixes: bfd546a552e1 ("e1000e: move force SMBUS near the end of enable_ulp function") Reported-by: Todd Brandt <todd.e.brandt@intel.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218940 Reported-by: Dieter Mummenschanz <dmummenschanz@web.de> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218936 Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240709203123.2103296-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-29e1000e: move force SMBUS near the end of enable_ulp functionHui Wang
The commit 861e8086029e ("e1000e: move force SMBUS from enable ulp function to avoid PHY loss issue") introduces a regression on PCH_MTP_I219_LM18 (PCIID: 0x8086550A). Without the referred commit, the ethernet works well after suspend and resume, but after applying the commit, the ethernet couldn't work anymore after the resume and the dmesg shows that the NIC link changes to 10Mbps (1000Mbps originally): [ 43.305084] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 10 Mbps Full Duplex, Flow Control: Rx/Tx Without the commit, the force SMBUS code will not be executed if "return 0" or "goto out" is executed in the enable_ulp(), and in my case, the "goto out" is executed since FWSM_FW_VALID is set. But after applying the commit, the force SMBUS code will be ran unconditionally. Here move the force SMBUS code back to enable_ulp() and put it immediately ahead of hw->phy.ops.release(hw), this could allow the longest settling time as possible for interface in this function and doesn't change the original code logic. The issue was found on a Lenovo laptop with the ethernet hw as below: 00:1f.6 Ethernet controller [0200]: Intel Corporation Device [8086:550a] (rev 20). And this patch is verified (cable plug and unplug, system suspend and resume) on Lenovo laptops with ethernet hw: [8086:550a], [8086:550b], [8086:15bb], [8086:15be], [8086:1a1f], [8086:1a1c] and [8086:0dc7]. Fixes: 861e8086029e ("e1000e: move force SMBUS from enable ulp function to avoid PHY loss issue") Signed-off-by: Hui Wang <hui.wang@canonical.com> Acked-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-1-dc8593d2bbc6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-27e1000e: move force SMBUS from enable ulp function to avoid PHY loss issueVitaly Lifshits
Forcing SMBUS inside the ULP enabling flow leads to sporadic PHY loss on some systems. It is suspected to be caused by initiating PHY transactions before the interface settles. Separating this configuration from the ULP enabling flow and moving it to the shutdown function allows enough time for the interface to settle and avoids adding a delay. Fixes: 6607c99e7034 ("e1000e: i219 - fix to enable both ULP and EEE in Sx state") Co-developed-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-27e1000e: Workaround for sporadic MDI error on Meteor Lake systemsVitaly Lifshits
On some Meteor Lake systems accessing the PHY via the MDIO interface may result in an MDI error. This issue happens sporadically and in most cases a second access to the PHY via the MDIO interface results in success. As a workaround, introduce a retry counter which is set to 3 on Meteor Lake systems. The driver will only return an error if 3 consecutive PHY access attempts fail. The retry mechanism is disabled in specific flows, where MDI errors are expected. Fixes: cc23f4f0b6b9 ("e1000e: Add support for Meteor Lake") Suggested-by: Nikolay Mushayev <nikolay.mushayev@intel.com> Co-developed-by: Nir Efrati <nir.efrati@intel.com> Signed-off-by: Nir Efrati <nir.efrati@intel.com> Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-05intel: legacy: Partial revert of field get conversionSasha Neftin
Refactoring of the field get conversion introduced a regression in the legacy Wake On Lan from a magic packet with i219 devices. Rx address copied not correctly from MAC to PHY with FIELD_GET macro. Fixes: b9a452545075 ("intel: legacy: field get conversion") Suggested-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-18intel: legacy: field get conversionJesse Brandeburg
Refactor several older Intel drivers to use FIELD_GET(), which reduces lines of code and adds clarity of intent. This code was generated by the following coccinelle/spatch script and then manually repaired. @get@ constant shift,mask; type T; expression a; @@ ( -((T)((a) & mask) >> shift) +FIELD_GET(mask, a) and applied via: spatch --sp-file field_prep.cocci --in-place --dir \ drivers/net/ethernet/intel/ Cc: Julia Lawall <Julia.Lawall@inria.fr> CC: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-08-24e1000e: Add support for the next LOM generationSasha Neftin
Add devices IDs for the next LOM generations that will be available on the next Intel Client platforms. This patch provides the initial support for these devices. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-02e1000e: Add support for the next LOM generationSasha Neftin
Add devices IDs for the next LOM generations that will be available on the next Intel Client platforms. This patch provides the initial support for these devices. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-02e1000e: Separate MTP board type from ADPSasha Neftin
We have the same LAN controller on different PCH's. Separate MTP board type from an ADP which will allow for specific fixes to be applied for MTP platforms. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-14Revert "e1000e: Fix possible HW unit hang after an s0ix exit"Sasha Neftin
This reverts commit 1866aa0d0d6492bc2f8d22d0df49abaccf50cddd. Commit 1866aa0d0d64 ("e1000e: Fix possible HW unit hang after an s0ix exit") was a workaround for CSME problem to handle messages comes via H2ME mailbox. This problem has been fixed by patch "e1000e: Enable the GPT clock before sending message to the CSME". Fixes: 3e55d231716e ("e1000e: Add handshake with the CSME to support S0ix") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214821 Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-13e1000e: Fix possible overflow in LTR decodingSasha Neftin
When we decode the latency and the max_latency, u16 value may not fit the required size and could lead to the wrong LTR representation. Scaling is represented as: scale 0 - 1 (2^(5*0)) = 2^0 scale 1 - 32 (2^(5 *1))= 2^5 scale 2 - 1024 (2^(5 *2)) =2^10 scale 3 - 32768 (2^(5 *3)) =2^15 scale 4 - 1048576 (2^(5 *4)) = 2^20 scale 5 - 33554432 (2^(5 *4)) = 2^25 scale 4 and scale 5 required 20 and 25 bits respectively. scale 6 reserved. Replace the u16 type with the u32 type and allow corrected LTR representation. Cc: stable@vger.kernel.org Fixes: 44a13a5d99c7 ("e1000e: Fix the max snoop/no-snoop latency for 10M") Reported-by: James Hutchinson <jahutchinson99@googlemail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=215689 Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Tested-by: James Hutchinson <jahutchinson99@googlemail.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-28e1000e: Correct NVM checksum verification flowSasha Neftin
Update MAC type check e1000_pch_tgp because for e1000_pch_cnp, NVM checksum update is still possible. Emit a more detailed warning message. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1191663 Fixes: 4051f68318ca ("e1000e: Do not take care about recovery NVM checksum") Reported-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-28e1000e: Fix possible HW unit hang after an s0ix exitSasha Neftin
Disable the OEM bit/Gig Disable/restart AN impact and disable the PHY LAN connected device (LCD) reset during power management flows. This fixes possible HW unit hangs on the s0ix exit on some corporate ADL platforms. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214821 Fixes: 3e55d231716e ("e1000e: Add handshake with the CSME to support S0ix") Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Suggested-by: Nir Efrati <nir.efrati@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-01e1000e: Separate ADP board type from TGPSasha Neftin
We have the same LAN controller on different PCH's. Separate ADP board type from a TGP which will allow for specific fixes to be applied for ADP platforms. Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-20e1000e: Fix packet loss on Tiger Lake and laterSasha Neftin
Update the HW MAC initialization flow. Do not gate DMA clock from the modPHY block. Keeping this clock will prevent dropped packets sent in burst mode on the Kumeran interface. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213651 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213377 Fixes: fb776f5d57ee ("e1000e: Add support for Tiger Lake") Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Mark Pearson <markpearson@lenovo.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-20e1000e: Separate TGP board type from SPTSasha Neftin
We have the same LAN controller on different PCHs. Separate TGP board type from SPT which will allow for specific fixes to be applied for TGP platforms. Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Mark Pearson <markpearson@lenovo.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-08-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/wwan/mhi_wwan_mbim.c - drop the extra arg. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-20e1000e: Do not take care about recovery NVM checksumSasha Neftin
On new platforms, the NVM is read-only. Attempting to update the NVM is causing a lockup to occur. Do not attempt to write to the NVM on platforms where it's not supported. Emit an error message when the NVM checksum is invalid. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213667 Fixes: fb776f5d57ee ("e1000e: Add support for Tiger Lake") Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Suggested-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-08-20e1000e: Fix the max snoop/no-snoop latency for 10MSasha Neftin
We should decode the latency and the max_latency before directly compare. The latency should be presented as lat_enc = scale x value: lat_enc_d = (lat_enc & 0x0x3ff) x (1U << (5*((max_ltr_enc & 0x1c00) >> 10))) Fixes: cf8fb73c23aa ("e1000e: add support for LTR on I217/I218") Suggested-by: Yee Li <seven.yi.lee@gmail.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20e1000e: Add space to the debug printSasha Neftin
Minor fixes to allow debug prints more readable. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20e1000e: Add support for Lunar LakeSasha Neftin
Add devices IDs for the next LOM generations that will be available on the next Intel Client platform (Lunar Lake) This patch provides the initial support for these devices Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-19net: e1000e: remove repeated word "the" for ich8lan.cHao Chen
There are double "the" in comment, so remove the redundant one. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-23e1000e: Fix prototype warningSasha Neftin
Correct report warnings in ich8lan.c, netdev.c phy.c and ptp.c files Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-03e1000e: remove the redundant value assignment in e1000_update_nvm_checksum_sptKaixu Xia
Both of the statements are value assignment of the variable act_offset. The first value assignment is overwritten by the second and is useless. Remove it. Reported-by: Tosk Robot <tencent_os_robot@tencent.com> Signed-off-by: Kaixu Xia <kaixuxia@tencent.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-23e1000e: bump up timeout to wait when ME un-configures ULP modeMario Limonciello
Per guidance from Intel ethernet architecture team, it may take up to 1 second for unconfiguring ULP mode. However in practice this seems to be taking up to 2 seconds on some Lenovo machines. Detect scenarios that take more than 1 second but less than 2.5 seconds and emit a warning on resume for those scenarios. Suggested-by: Aaron Ma <aaron.ma@canonical.com> Suggested-by: Sasha Netfin <sasha.neftin@intel.com> Suggested-by: Hans de Goede <hdegoede@redhat.com> CC: Mark Pearson <markpearson@lenovo.com> Fixes: f15bb6dde738cc8fa0 ("e1000e: Add support for S0ix") BugLink: https://bugs.launchpad.net/bugs/1865570 Link: https://patchwork.ozlabs.org/project/intel-wired-lan/patch/20200323191639.48826-1-aaron.ma@canonical.com/ Link: https://lkml.org/lkml/2020/12/13/15 Link: https://lkml.org/lkml/2020/12/14/708 Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Yijun Shen <Yijun.shen@dell.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-28e1000e: Add support for Meteor LakeSasha Neftin
Add devices IDs for the next LOM generations that will be available on the next Intel Client platform (Meteor Lake) This patch provides the initial support for these devices Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-25intel-ethernet: clean up W=1 warnings in kdocJesse Brandeburg
This takes care of all of the trivial W=1 fixes in the Intel Ethernet drivers, which allows developers and maintainers to build more of the networking tree with more complete warning checks. There are three classes of kdoc warnings fixed: - cannot understand function prototype: 'x' - Excess function parameter 'x' description in 'y' - Function parameter or member 'x' not described in 'y' All of the changes were trivial comment updates on function headers. Inspired by Lee Jones' series of wireless work to do the same. Compile tested only, and passes simple test of $ git ls-files *.[ch] | egrep drivers/net/ethernet/intel | \ xargs scripts/kernel-doc -none Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Resolved kernel/bpf/btf.c using instructions from merge commit 69138b34a7248d2396ab85c8652e20c0c39beaba Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-30e1000e: continue to init PHY even when failed to disable ULPAaron Ma
After 'commit e086ba2fccda4 ("e1000e: disable s0ix entry and exit flows for ME systems")', ThinkPad P14s always failed to disable ULP by ME. 'commit 0c80cdbf3320 ("e1000e: Warn if disabling ULP failed")' break out of init phy: error log: [ 42.364753] e1000e 0000:00:1f.6 enp0s31f6: Failed to disable ULP [ 42.524626] e1000e 0000:00:1f.6 enp0s31f6: PHY Wakeup cause - Unicast Packet [ 42.822476] e1000e 0000:00:1f.6 enp0s31f6: Hardware Error When disable s0ix, E1000_FWSM_ULP_CFG_DONE will never be 1. If continue to init phy like before, it can work as before. iperf test result good too. Fixes: 0c80cdbf3320 ("e1000e: Warn if disabling ULP failed") Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-07-01ethernet/intel: Convert fallthrough code commentsJeff Kirsher
Convert all the remaining 'fall through" code comments to the newer 'fallthrough;' keyword. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-05-22e1000e: Warn if disabling ULP failedKai-Heng Feng
The hardware may stop working if driver failed to disable ULP mode. Take the return value of e1000_disable_ulp_lpt_lp() into account, and pass up the error if it fails. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19e1000e: Add support for Alder LakeSasha Neftin
Add devices ID's for the next LOM generations that will be available on the next Intel Client platform (Alder Lake) This patch provides the initial support for these devices Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-10-29e1000e: Add support for Tiger LakeSasha Neftin
Add devices ID's for the next LOM generations that will be available on the next Intel Client platform (Tiger Lake) This patch provides the initial support for these devices Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-07-24e1000e: add workaround for possible stalled packetKai-Heng Feng
This works around a possible stalled packet issue, which may occur due to clock recovery from the PCH being too slow, when the LAN is transitioning from K1 at 1G link speed. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204057 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-06-28e1000e: Reduce boot time by tightening sleep rangesArjan van de Ven
The e1000e driver is a great user of the usleep_range() API, and has nice ranges that in principle help power management. However the ranges that are used only during system startup are very long (and can add easily 100 msec to the boot time) while the power savings of such long ranges is irrelevant due to the one-off, boot only, nature of these functions. This patch shrinks some of the longest ranges to be shorter (while still using a power friendly 1 msec range); this saves 100msec+ of boot time on my BDW NUCs Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-04-27net: intel: Cleanup the copyright/license headersJeff Kirsher
After many years of having a ~30 line copyright and license header to our source files, we are finally able to reduce that to one line with the advent of the SPDX identifier. Also caught a few files missing the SPDX license identifier, so fixed them up. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23intel: add SPDX identifiers to all the Intel driversJeff Kirsher
Add the SPDX identifiers to all the Intel wired LAN driver files, as outlined in Documentation/process/license-rules.rst. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-12e1000e: Fix link check race conditionBenjamin Poirier
Alex reported the following race condition: /* link goes up... interrupt... schedule watchdog */ \ e1000_watchdog_task \ e1000e_has_link \ hw->mac.ops.check_for_link() === e1000e_check_for_copper_link \ e1000e_phy_has_link_generic(..., &link) link = true /* link goes down... interrupt */ \ e1000_msix_other hw->mac.get_link_status = true /* link is up */ mac->get_link_status = false link_active = true /* link_active is true, wrongly, and stays so because * get_link_status is false */ Avoid this problem by making sure that we don't set get_link_status = false after having checked the link. It seems this problem has been present since the introduction of e1000e. Link: https://lkml.org/lkml/2018/1/29/338 Reported-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-12Revert "e1000e: Separate signaling for link check/link up"Benjamin Poirier
This reverts commit 19110cfbb34d4af0cdfe14cd243f3b09dc95b013. This reverts commit 4110e02eb45ea447ec6f5459c9934de0a273fb91. This reverts commit d3604515c9eda464a92e8e67aae82dfe07fe3c98. Commit 19110cfbb34d ("e1000e: Separate signaling for link check/link up") changed what happens to the link status when there is an error which happens after "get_link_status = false" in the copper check_for_link callbacks. Previously, such an error would be ignored and the link considered up. After that commit, any error implies that the link is down. Revert commit 19110cfbb34d ("e1000e: Separate signaling for link check/link up") and its followups. After reverting, the race condition described in the log of commit 19110cfbb34d is reintroduced. It may still be triggered by LSC events but this should keep the link down in case the link is electrically unstable, as discussed. The race may no longer be triggered by RXO events because commit 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts") restored reading icr in the Other handler. Link: https://lkml.org/lkml/2018/3/1/789 Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-05e1000e: Fix check_for_link return value with autoneg offBenjamin Poirier
When autoneg is off, the .check_for_link callback functions clear the get_link_status flag and systematically return a "pseudo-error". This means that the link is not detected as up until the next execution of the e1000_watchdog_task() 2 seconds later. Fixes: 19110cfbb34d ("e1000e: Separate signaling for link check/link up") Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-02e1000e: Fix e1000_check_for_copper_link_ich8lan return value.Benjamin Poirier
e1000e_check_for_copper_link() and e1000_check_for_copper_link_ich8lan() are the two functions that may be assigned to mac.ops.check_for_link when phy.media_type == e1000_media_type_copper. Commit 19110cfbb34d ("e1000e: Separate signaling for link check/link up") changed the meaning of the return value of check_for_link for copper media but only adjusted the first function. This patch adjusts the second function likewise. Reported-by: Christian Hesse <list@eworm.de> Reported-by: Gabriel C <nix.or.die@gmail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=198047 Fixes: 19110cfbb34d ("e1000e: Separate signaling for link check/link up") Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Tested-by: Christian Hesse <list@eworm.de> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-08-08e1000e: add check on e1e_wphy() return valueGustavo A R Silva
Check return value from call to e1e_wphy(). This value is being checked during previous calls to function e1e_wphy() and it seems a check was missing here. Addresses-Coverity-ID: 1226905 Signed-off-by: Gustavo A R Silva <garsilva@embeddedor.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-30e1000e: Add Support for CannonLakeSasha Neftin
The propagation of CannonLake mac type to driver functionality Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Reviewed-by: Raanan Avargil <raanan.avargil@intel.com> Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-30e1000e: Initial Support for CannonLakeSasha Neftin
i219 (6) and i219 (7) are the next LOM generations that will be available on the nextIntel Client platform (CannonLake) This patch provides the initial support for these devices Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Reviewed-by: Raanan Avargil <raanan.avargil@intel.com> Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-30e1000e: fix PTP on e1000_pch_lpt variantsJarod Wilson
I've got reports that the Intel I-218V NIC in Intel NUC5i5RYH systems used as a PTP slave experiences random ~10 hour clock jumps, which are resolved if the same workaround for the 82574 and 82583 is employed, so set the appropriate flag2 in e1000_pch_lpt_info too. Reported-by: Rupesh Patel <rupatel@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-16e1000e: fix PTP on e1000_pch_lpt variantsJarod Wilson
I've got reports that the Intel I-218V NIC in Intel NUC5i5RYH systems used as a PTP slave experiences random ~10 hour clock jumps, which are resolved if the same workaround for the 82574 and 82583 is employed, so set the appropriate flag2 in e1000_pch_lpt_info too. Reported-by: Rupesh Patel <rupatel@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-13e1000e: use BIT() macro for bit definesJacob Keller
This prevents signed bitshift issues when the shift would overwrite the signed bit, and prevents making this mistake in the future when copying and modifying code. Use GENMASK or the unsigned postfix for cases which aren't suitable for BIT() macro. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 21:48:13 +0000